User manual
Contents
1. LightZlceE LEDForce 7 RGB USER MANUAL User manual LEDForce 7 RGB 1 Safety instructions Every person involved with the installation operation and maintenance of this device has to be qualified follow the instructions of this manual CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires This device has left our premises in absolutely perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual Important Damages caused by the disregard of this user manual are not subject to warranty The distributor will not accept liability for any resulting defects or problems Keep away from heaters and other heating sources If the device has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature Make sure that the power cord is never crimped or damaged by sharp edges Check the device and the power cord from time to time If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a haz2. 00 99 0 100 lumiance mode static adjust Blue manual mode sta D3XX XX 00 99 blue luminance adjust 00 99 0 100 lumiance tic adjust Strobe 00 99 non strobe fastest strobe Strobe D4XX XX 00 99 F XX XX 01 15 Auto mix color speed adjust 01 fastest 15 slowest 7color strobe C XX XX 01 15 7color strobe 1 fastest 15 slowest 1 DMX Mode1 1 CH display 1XXX XXX DMX address press up down change DMX address 1 CH1 0 255 Function 2 CH 14 0 255 CH 2 0 255 DMX mode 1 Macro 35colorl DMX mode2 Macro Luminence 36 color setting setting black luminance 2 DMX Mode2 2 CH display 2XXX XXX DMX address press up down change DMX address DMX Mode3 3 CH display 3XXX XXX DMX address press up down change DMX address 3 CH10255 DMX mode 3 3 R G B luminance setting 4 DMX mode 4 7CHS display 4XXX XXX DMX address Pressing UP DOWN change DMX address 6 fo 69 66 lew SCS lms 5 fe So NA 5 5 O 0 35 color 0 35 setting color 1 255 1 255 1 255 0 15 static adjust RGB strobe 14 255 16 255 16 steps Macro macro PRI A z 0 7 OFF 2 72 107 8 255 JOIN IN 1 108 143 36 71 light mode 0 255 min max NA Setting Speed 108 143 dim amp light mode 144 179 144 179 NA N NA ae 7 color sound 216 251 7 color strobe control 252 255 NA NA 7 color sound luminance
3. change as control sound intensity 3 Technical specifications Input voltage range 90 260V 50 60Hz Power consumption 28W 75VA power factor 0 38 LED device 7 x 3 Watt Tri Color RGB LEDs Expected life time 50 000 hours Beam Angle 10 25 optional kit available Operational modes Sound Active Macro Auto DMX Control protocol DMX 512 DMX modes 4 Control channels 1 2 3 7 Setting and addressing LED control display DMX IN OUT 5 pin XLR Dimensions LxWxH 254 x 184 x 146mm 10 x 7 5 x 5 5 without hanging bracket Weight 1 9 kg Version 1 1 April 19 2010 Specifications are subject to change without specification 4
4. ard shields lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired for example by cracks or deep scratches Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Make sure that the available voltage is not higher than stated in this manual Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord During the initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective DANGER OF BURNING Never touch the device during the operation The housing heats up to the housing temperature Don t switch the device on and off in short intervals as this would reduce the lamp s life HEALTH HAZARD Never look directly into the light source as sensitive persons may suffer an epileptic shock especially meant for epileptics Always disconnect from the mains when the device is not in user or before cleaning it Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified persons are not subject to warranty Keep away children and amateurs from the device There are no serviceable parts inside the device Maintenance and servi
5. ce operations are only to be carried out by authorized dealers 2 Operating instructions 1 This system has DMX Online mode and Stand alone Mode Online mode can link other units and be controlled by the DMX controller And Stand alone Mode has the functions of Sound Auto Mixcolor and Strobe and so on 2 If a DMX signal is present under Online mode the DMX LED will blink very fast to indicate While under Master Slave mode Master s LED indicator will light and Slave Ss ona will blink to indicate 3 Button Function Description Master 5 Press MODE button to select your desire mode HHHH And press UP or Down button to select DMX address DMX switch AUTO MODE adjust the speed value and select color Up key is to add value Down key is to reduce value 0 Q 0 Note If you press UP or DOWN key more than seconds Mode UP Down you can select quickly Button mode Function description Select your desire mode Up DMX select address run AUTOMODE adjust MODE SPEED MACRO select colour DMX select address run AUTOMODE adjust MODE SPEED MACRO select colour INO MODE DISPLAY INTRODUCTION 50 XXX XXX 001 511 Macro CH 1 Luminance CH 2 XXX 001 511 R CH 1 G CH2 B CH3 DMX mode 4 7CHS 4XXX XXX 001 51 1 DMX MODE Red manual mode sta D1XX XX 00 99 red luminance adjust 00 99 0 100 Iumiance adjust tic Green manual D2XX XX 00 99 green luminance adjust
Download Pdf Manuals
Related Search