Home

CAM6623F User`s Manual (English)

1. ON a de i A kx x K ee de ve CC a R E Draw Clear Areal Draw Clear Area2 Draw Clear Area3 Save Area Settings Brightness Contrast Saturation Sharpness o Automatic Gain Control E Shutter Time 1 Outdoor Sense Up 1 15 off x Auto by Define Lux T Day Night Color Mode ICR DU select Synchronize with Digital Input 1 the ICR will be synchronized with Digital Input 1 and the Digital Input 1 can not be used by user for other purpose Color when over 7lux Mono whenunder 3lux Define Lux Current Lux About over 55 lux White Balance Red gain Blue gain 0 Denoise SES ees 3 For the security purpose there are 3 areas can be setup for privacy masks the masked areas will not be shown in Live View and recorded file To set up or clear the 33 Zon privacy mask click Draw Clear Areal button and then use mouse to drag the area on the video After configuration click Save Area Settings button to save the settings Image Quality Brightness Contrast Hue Saturation Sharpness Adjust these parameters to get clear video Automatic Gain Control Adjust this function according to the environment Shutter Time Indoor Select this option for the indoor environment the camera will adjust the shutter time automatically 1 30 1 1000 Manually adjust and fix the shutter time for dif
2. If you want to restore the above setting to factory default click Default button to load the default settings 35 Aisoni Audio Setting This device supports 2 way audio Note the audio will not be smooth when enable SD card recording function simultaneously Audio Setting Enable Disable Audio from Device to Local PC For this device to local PC select Enable and then click Apply to start this function If set to Disable the Voice icon on Live View page is not workable You can also change the Audio Type if necessary Audio from Local PC to This Device For local PC to this device click Chatting icon on the Live View page and then talk to the microphone connected on PC eg 3 C ont kb d 1 lf Lie e HN e Sid dai e T 7 tas BR SS Wa ey Adjust Volume EE Audio Out 0 The volume level of Microphone in and Audio Out can be adjusted 37 C Network Setting Network Setting Network setting Network Subnet Mask EG Gateway 192 368 1254 Setting a IPv Address 80 20fdf fe00 28b3 HTTP Port a0 HTTPS Port 4435 HTTPS Setting UPnP Port Forwarding External HTTP Port an External HTTPS Port 443 External RTSP Port 554 0 RTSP Server 9 Enable C Disable HT Authentication Disable RTSP Port 554 RTP Start Port 5000 1024 9997 em End Port 9000 1027 10000
3. Note the video format is compressed with H 264 the PC must install the H 264 decoder You can install FFdshow from the included CD for the decoder Delete Recorded File To delete the recorded file check the check box of the file then click Del button Format SD Card lf you want to empty the Micro SD card click Format SD Card to format the card To view the recorded files just click the date it will show the list of the recorded files 70 Auto Deletion Recorded Files in SD Card SD Card lt lt 239M 239M gt gt Format SD Card Y Keep 1 2 3 4 days If enable this function the recorded files before the selected day will be deleted automatically After select the option click Apply to save the setting 71 6 Network Configuration A Intranet Only Connects to PC Directly lf you want to connect the camera to PC directly for the very first time setup please refer to the figure below for the connection Q A JCT Ethernet Cable Camera This device supports Auto MDI MDI X PE IP Address 192 168 1 200 you can use a straight or cross over IP Address 192 168 1 2 Subnet Mask 255 255 255 0 cable to connect these two devices Subnet Mask 255 255 255 0 Gateway Empty Gateway Empty Http Port 80 RTSP Port 554 Connect the camera to PC with Ethernet cable The camera equips an Auto MDI MDIX network connector you can use a straight or cross over Etherne
4. Log mail E E Mail Subject GPIO In Detected Dearie erick EES _ Enable Digital Input detection based on Schedule Time Output Switch Type C OnOff Switch Time Switch Digital Inout Setting Input 1 Sensor Type Select the type of the sensor which connected to the Digital Input N O means Normally Opened this type of sensor will be triggered when it is closed N C means Normally Closed this type of sensor will be triggered when it is opened Input 1 Trigger Action Select the actions when the Digital Input is triggered E mail When the Digital Input is triggered send the recorded video or snapshot to the specific mail address FTP When the Digital Input is triggered send the recorded video or snapshot to the specific FTP site Save to Samba When the Digital Input is triggered send the recorded video or snapshot to the Samba network storage To set the mail account FTP site and Samba network storage please refer to Configuration gt Network Setting gt Mail FTP Samba page Outi When the Digital Input is triggered activate the Digital Output 1 65 Zon Save to SD Card When the Digital Input is triggered record the video or Snapshot into to SD card Log If Save to SD Card option has been selected for action you can determine whether send a message to the specific mail address FTP site or Samba network storage E Mail Subject The subject of the E mail w
5. 31 Aisoni To view the live video with a 3G mobile phone or PDA including Android devices open Streaming Player or web browser in the mobile phone type the URL as following to link and view the live video rtsp lt Public IP of camera gt lt RTSP port gt lt RTSP path of 3GPP Streaming gt View Live Video with Android Device lt Public IP of camera gt The public IP address of the camera lt RTSP port gt The RTSP port of the camera This port is assigned in Configuration gt Network Setting gt Network Setting lt RTSP path of 3GPP Streaming gt The name of the 3GPP video stream If your 3G mobile phone or PDA does not support the viewing of RTSP streaming you can view the camera with http connection To do this use a Java compliant browser such as Opera and type the URL as following to link and view the live video http lt Public IP of camera gt lt HTTP port gt Jview html lt Public IP of camera gt The public IP address of the camera lt HTTP port gt The HTTP port of the camera This port is assigned in Configuration gt Network Setting gt Network Setting Note Do not use the IE browser in 3G mobile phone because it doesn t support Java After set up click Apply to save the settings 32 Image Setting Image Setting Privacy Mask SL K AA AA AA 8 x y x Video Orientation Flip Mirror Image Setting NN e ee ee
6. 3X Zoom 15M IR 1080P Full HD H 264 CMOS Network Vandal Dome CAM6623F CAM6623F PoE User s Manual Date 7 10 2014 Firmware Version VC1 0 22 ES 1 Me WP TAC o ae E E ee a T 3 2 PEOGUGCT Ee Ee e den sn anaenne sn OEE OERE SE AEREA 3 d ZE PTOOUCE le EE Oe E 7 A Hardware AS AA UOTE vere sane nnmnnn 7 EELER 7 Audio COMMS CHONG EE 9 TO SOAS C HOS eae a TAE 9 PIS une AS AGIUS ON EE 11 B Montor SeN sea scatter E ste sed decane eee AEE 12 IP PS SIONS NN E 13 GR DUCAL e E 15 D CORMAN ME 19 E eee ee ee ee es ee ee ee es ee eee 19 OY ST aere OR A A 19 SET NaN te SHC AR eee seus ee nano seen ee ee eee ee ee cr 23 System Upgrade cccccceccccceececeececseceseeeeeeeeeeeseeeeeseeeeeseeeeeseueesseeesseeessueesseeesseeeeseneeeeas 25 OY SCL OG ee A E EA A E 26 B Video Audio Setting ra nanas ses 27 VAO FONA E 27 AS ne ene een eee eee rere eee eee ree 33 Audio SWING cet sen eneee ELEELE RE LEERE EEEE EEEE EEE ELE EEEE EEEE EREEREER EERE 36 C Network Setting EE 38 IS e a NO eaea E A E E EEE EEA E E E 38 MA FTPA nl Se nee eee ee eer 43 PR DNS capsueane eseeenenecosuxcxcsvensenerseecuserecusant 47 D INGTON Advanc S etling a can nan ai 50 SR Se D 50 SNMP Setting ss sens esesssnsennenensnnenenanenananenennennneeennnennosmenenenennenenennenenenenenniennnenes 52 P SO E 54 COS DS CPS CAO ne da a 56 EPE S02 e e e eee nee nen nee nee rene enon nn eon renee ener eee eee eer 57 e Event e Te UU Le ME 58 V
7. IP Address 234 5 6 78 224 3 1 0 239 255 255 255 Port 6000 1 65535 1 255 224 3 1 0 239 255 255 255 Port 6001 i 65535 1 255 IP Assignment DHCP 9 Static IP IP Address 192 168 1 200 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 168 95 1 1 168 95 192 1 DHCP If this device behinds a router and the router provides DHCP service using DHCP this device will get all network parameters from the router automatically Static Assign IP address subnet mask gateway and DNS manually IPv6 Assignment Enable IPv Manually Setup the IPv6 Address IPve Address Prefix IPv6 Gateway IPv DNS n IPv6 DHCP Enable 9 Disable IPv6 Address feso 20fhdtt fedd 28b3 This device supports IPv6 address you can enable this function Manually Setup the IPv6 Address Assign IP address gateway and DNS manually IPv6 DHCP If this device behinds a router and the router provides DHCP service for IPv6 enable DHCP this device will get all network parameters from the router automatically Port Assignment Set the port if necessary If this device will be connected via Internet configure the NAT Network Address Translation in router to match the port assignment HTTP Port Set the port for HTTP connection The default is 80 change the port if you want to use router s NAT Network Address Translation to make
8. 2 Adjust Tilt Gimbals as wished 3 Fasten Screw 4 and Screw 5 to fix the gimbals Tilt Gimbals Screw 3 crew 4 and 5 Pan Gimbals Screw 1 Rotation Gimbals B Monitor Setting 1 Right Click on the desktop Select Properties Arrange Icons By Refresh Save De Scheme Graphics Options Display Modes New Properties 2 Change color quality to Highest 32bit Display Properties Themes Desktop ScreenSaver Appearance Settings Display Plug and Play Monitor on Intel R 82915G G 910GL Express Chipset Family Screen resolution Color qualit Less y More Highest 32 bit 1024 by 768 pixels ii ni nin 12 Zon C IP Assignment gt Always consult your network administrator before assigning an IP address to your camera in order to avoid using a previously assigned IP address gt MAC Address Each network camera has a unique Ethernet address MAC address shown on the sticker of the device gt One final note although the IP Search is able to find and configure any network device on the LAN except those that are behind a router it is a good idea to set the host PC to the same subnet In order to connect to the Web based user interface of the network camera the host PC must be in the same subnet For more information about subnets please consult your network administrator Asoni IP Search is a utility that provides
9. Public IP Address lf the camera will be added into a local network LAN and will be accessed via both Intranet and Internet please refer to the figure below for the connection Intranet LAN Internet WAN PCI i 5 3G Mobile Phone KC IP Address 192 168 1 2 Subnet Mask 255 255 255 0 Camera 1 Gateway 192 168 1 254 IP Address 192 168 1 200 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 EEN Http Port 80 i ADSL RTSP Port 554 Public IP 60 220 20 250 To allow the cameras can be linked through Internet set the NAT Port Forwarding or Virtual Server as following Camera 2 LAN IP Address 192 168 1 201 Subnet Mask 255 255 255 0 IP Acaress Genee __192 168 1 200 80 Gateway 192 168 1 254 Router or IP Sharing 192 168 1 200 554 192 168 1 200 Http Port 80 IP Address 192 168 1 254 BS Pen Subnet Mask 255 255 255 0 Re 192 168 1 201 80 a 192 168 1 201 0000 oo d Assume the local network will be connected to Internet with ADSL connection first configure the router or IP sharing with the ADSL connection Please refer to the user s manual of router for the configuration Connect the cameras to the Switch Refer to Configuration gt Network gt Network page to configure the IP settings Configure the cameras with different IP address Ex assign cameral to 192 168 1 200 and assign camera2 to 192 168 1 201 Please make sure the IP address of Router PC and cameras are in the
10. Zon Schedule This function provides the schedule for the following Send Snapshot with the Scheduled Time automatic send a snapshot to the E mail address FTP server or Samba network storage or save to SD card The interval time can be set Activate and Stop the Motion Detection with Scheduled Time if the Enable Motion Detection in Schedule Time option in Configuration gt Event Handling gt Event Setting gt Motion Detection page is enabled the motion detection will be activated with scheduled time and stop the detection in the other time Activate and Stop the Digital Input Detection with Scheduled Time if the Enable Digital Input Detection in Schedule Time option in Configuration gt Event Handling gt I O Setting page is enabled the Digital Input detection will be activated with scheduled time and stop the detection in the other time Schedule Enable Disable Snapshot lE mail FTP Save to SD card Save to Samba Interval 10 Second s 1 50000 File Name Snapshot Setup Schedule Select Unselect All Time Click AIl of the top left of the time table to select or 67 Aisoni unselect all time The square in green means the time is selected the square in light grey means the time is unselected Select Unselect Specific Time Click the square of the time table to select or unselect the specific time The square in green means the time is selected the squar
11. down list 1920x1080 Up to 30FPS 1280x720 Up to 30FPS 640X480 Up to 30FPS 320X240 Up to 30FPS 176X144 Up to 30FPS Frame Rate Per Second The video refreshing rate per second Select the frame rate from the pull down list Video Compression Format Choose H 264 or MJPEG format to compress and output the video stream 28 Zon H 264 The video stream will be compressed in H 264 format Profile Provides Baseline Main and High profile High and Main profile can deliver better video quality but it will cause network camera have larger load relatively CBR Constant Bit Rate Set the Video Bitrate from 32Kbps 10Mbps depend on the upload bandwidth of network The data size of video stream will be limited under the selected bit rate VBR Variable Bit Rate Set the Video Quantitative from 1 10 the higher value will get better video quality The data size of video stream is no limitation if the upload bandwidth of network is lower than the data size the video will be displayed slowly GOP Size Set the GOP Group of Picture size If you don t know what value should be set please set it to 1 X FPS MJPEG The video stream will be compressed in MJPEG format Quality 5 levels for select The higher quality will get bigger file size RTSP Path Assign a name to identify this video stream When view the video stream with RTSP connection the URL
12. large area The moving object smaller than the 50 of the The moving object larger than the 50 of the motion motion area it will not be detected area it will be detected and the motion is triggered To detect the smaller moving object use 3 motion areas to replace a large motion area refer the figure below The moving object will be detected when it is in any of the 3 motion areas and the motion is triggered Tampering Detection This device provides the Tampering Detection function Tampering Detection 9 Enable Disable When Detected E mail FTP Wlouti Save to sD Save to Samba Detection Interval 30sec Aisoni Tampering Detection Enable Disable Select to enable or disable this function After enable the Tampering Detection when the lens of camera has been covered or moved this event will be triggered and send the video or snapshot to specific mail address transmit the video or snapshot to remote FTP server or Samba network storage trigger the digital out record video or snapshot into local SD card When Detected Select what actions will be taken once the tampering detection is triggered E mail When the tampering detection is triggered send the recorded video or snapshot to the specific mail address FTP When the tampering detection is triggered send the recorded video or snapshot to the specific FTP site Save to Samba When the tampering det
13. may use TCP and UDP for connecting TCP connection uses RTSP Port UDP connection uses RTP Start and End Port Multicast Setting Based on the RTSP Server streaming 1 IP Address 234 5 6 78 224 3 1 0 239 255 255 255 Streaming 2 IP Address 224 3 1 0 239 255 255 255 Port 1 65535 Da 28 Multicast addressing is a network technology for the delivery of streaming to a group of destinations simultaneously using the most efficient strategy to deliver the messages over each link of the network only once creating copies only when the links to the multiple destinations split To implement the Multicast a switch or router that supports Multicast function is necessary in the network lf your network supports Multicast you can configure the device to enable this function by setup the following IP Address This is the multicast group address the streaming should be sent to You 41 Zon should configure each recipient with the same multicast group address and receive the streaming from this address The range is 224 3 1 0 239 255 255 255 Port The multicast port The range is 1 65535 TTL Time To Live TTL for Multicast Packets This value decides how far from a sending host a given multicast packet should be forwarded Onvif Setting This device supports Onvif standard you can configure the following settings to compatible with the NVC Network Video Cli
14. orientation Privacy Mask 3 definable areas Security Password protection IP address filtering HIT TPS encrypted data transmission IEEE 802 1x port based authentication QoS DSCP Recording Trigger Motion Detection Digital In Tampering Detection IP Check Network Disconnect Client Software Microsoft IE V7 0 32 bit or above Mozilla Firefox V6 0 or above Opera V11 5 or above Safari V5 1 or above Google Chrome V13 0 or above Android iOS smart phone iCAM Smart Connected Clients Up to 10 clients simultaneously PC Requirement OS Windows 7 Vista XP Suggested Hardware Intel Core 2 Duo 2 53GHz RAM 1GB Graphic card 128MB onboard Specifications are subject to change without notice 3 Product Installation A Hardware Installation Cable Connections Power Jack Network Connector Micro SD Card Slot Terminal Block 7 The terminal block provides the following functionalities Video The installed BNC connector allows connect to the analog display to output analog video for locally monitoring MIC IN Allows connect to a passive type of microphone the audio will be heard at the remote site Line OUT Allows connect to an amplified speaker you can hear the voice of the remote site from the speaker DI DO Digital In and Digital Out 1 Refer to the next sections to connect the cable of Digital I O Audio output and MIC input if you want to use these fu
15. 0 555 3g Camera 2 Without audio rtsp 60 220 20 250 555 3gx Connects to Internet with Floating Public IP Address lf the public IP address of ADSL connection is variable you can enable DDNS function to get a fixed URL to instead of the IP address Note only one device can enable the DDNS function in the local network LAN multiple devices use DDNS will update to the DDNS provider too frequently and the DDNS provider will block your URL If the router has DDNS function use router s DDNS function is recommended Please refer to the user s manual of router for the configuration lf the router doesn t have DDNS function use one of the cameras DDNS function is recommended Refer to Configuration gt Network gt DDNS page to configure and enable the DDNS function After enable the DDNS assume the registered URL is test dyndns org now the cameras can be linked with following URLs Client from Internet Comes 1 http test dyndns org 3081 a PC2 With audio rtsp test dyndns org 554 3g Camera 1 Without audio Must enable 3GPP 3G Mobile rtsp test dyndns org 554 3gx Stream in Configuration Phone With audio gt Video Audio gt Video rtsp test dyndns org 555 3g Format page Without audio rtsp test dyndns org 555 3gx Camera 2 79 Zon 7 Factory Default To recover the default password and other settings please follow the steps 1 Power off this device 2 Remove the
16. 20100115 121032m avi 192 168 11 50 Event ex VNAS IP_Address Folder WORKGROUP sambatest FRE Yes Y ex NAS Location 20100115 121032m avi 43 Mail Setting Login Method Account F Send Mail Server smtp mailserver com User Name test Password e Gender e Mail sender mailserver com Receiver s Mail receiver Cabcmail com Mai Ports Default Port 25 E secure Connect Login Method This device provides 2 kinds of mail settings Anonymous for the mail server which doesn t need login with user name and password Account for the mail server which needs login with user name and password Send Mail Server The IP address or URL of the send mail server User Name Password The user name and password of the sender to login mail server and send the mail Sender s Mail The sender s mail address Receiver s Mail The receiver s mail address BCC Mail The mail address to receive the mail also Mail Port The port of the mail service Default is 25 Secure Connect Enable this function if your mail server needs it FTP Setting FTP Server an company com User Name Password FTP Port Store Path FTP Mode Auto Create Folder by Date Yes ex Store Path 20100115 121032m avi isoni FT
17. 9 Disable 30sec Record Video into SD Card This device supports 5 kinds of event detections 08 Zon Motion Detection Digital Input Detection Tampering Detection This event will be triggered when the lens of camera has been covered or moved Network Disconnection Detection This event will be triggered once the wire network is disconnected Specific IP Detection This event will be triggered once the network connection with a specific IP address is disconnected Motion Detection This device allows 3 areas for detect motion When motion detection is triggered it can send the video or snapshot to specific mail address transmit the video or Snapshot to remote FTP server or Samba network storage trigger the digital out record video or snapshot into local SD card Event Setting K d te L e G da A oe ean oe a ets x D ie BS FE D k T e Sx J G d d ce a mm Es p stats f P i i teg Set Area sensitivity Detect Area 1 W E mail CAP Mlouti W Save to SD card Save to Samba E V Detect Area 2 C E mail diem lount W Save to SD card C Save to Samba E 4 Detect Area 3 E E mail Il FIP F Outi wl Save to SD card E Save to Samba Leg Ia E mail ICT FIP CT Save to Samba E Mail Subject E Mail Subject IP Camera Warning Detection Interval 10sec a period of time between every two motions detecte
18. IP address of router Set the IP address of a valid DNS into cameras An invalid DNS will cause the domain name can t be resolved and reached such as email address For example if the IP settings have been configured as the above figure the cameras can be linked with following addresses http 192 168 1 200 http 192 168 1 201 Aisoni B Internet Only Connects to ADSL with Fixed Public IP Address lf the camera connects to Internet with an ADSL modem and the public IP address of ADSL is fixed please refer to the figure below for the connection Internet WAN Camera 3G Mobile Phone IP Address 60 220 20 250 Subnet Mask 255 255 255 0 Gateway 60 220 20 254 Http Port 80 oo RTSP Port 554 ft ADSL Connect the camera to the ADSL modem Refer to Configuration gt Network gt Network page configure the IP address Subnet Mask Gateway and DNS with the settings that ISP provided for ADSL connection For example if the public IP address is 60 220 20 250 now the camera can be linked with following addresses With audio 3G Mobile rtsp 60 220 20 250 3 EE EEN dons D J Configuration Video Audio Phone Without audio Video Format page rtsp 60 220 20 250 3gx 74 Zon Connects to ADSL with Floating Public IP Address PPPoE lf the camera connects to Internet with an ADSL modem and the public IP address of ADSL is variable the camera can use PPPOE function fo
19. OS SA REELE EREE EEEE EEEE ELEAN NEEE ENEE ERRE 58 KO BE 65 EE 67 L ILE ESS BR ES e E 69 6 Network Configuration ane si anses nes ss eau 72 A INNE ON rne ir tree ne eer nene tele erte eee teee tere eene rarer eere ees 72 connects 10 PO RT 72 Comece TO Se ESTEA N WE 73 B AS ON en en 74 Connects to ADSL with Fixed Public IP Address 74 Connects to ADSL with Floating Public IP Address PPPOE 75 G Praner EMNENE 77 Connects to Internet with Fixed Public IP Address 77 Connects to Internet with Floating Public IP Address 79 Ps PACIOEV Eege 80 Compatible List of SD CAN egene 81 Zon 1 Preface This camera is a 1080P Full HD 2 Mega Pixel CMOS network camera which builds in web server User views real time video via IE browser It supports H 264 MJPEG and MPEG4 video compression which provides smooth and high quality video The event video can be stored in the Micro SD card and can be playback remotely This camera is equipped with high resolution CMOS sensor and 3X optical zoom lens that can used for wide angle observation and detail viewing to the far end object as well The IR model equips infrared illuminator to provide good image quality even in darkness The PoE model built in support for Power over Ethernet allows the camera to receive both data and power over a single Ethernet cable This camera is an easy to use IP camera which is designed for security application Product Specifications Onv
20. P Server The IP address or URL of the FTP server User Name Password The user name and password to log in the FTP server FTP Port The port of the FTP service Default is 21 Store Path The path to save the sent video file FTP Mode Select PORT or PASV to fit the FTP server PORT is for sending file to an Active FTP server PASV is for sending file to a Passive FTP server Auto Create Folder by Date If select Yes a folder will be created under the Store Path and named with the date and then the video file will be saved in this folder If select No the video file will be saved in the Store Path without folder Samba Network Storage Setting Samba is a networking protocol provides file sharing service between network devices If you have a network storage is running Samba service this camera can send the event video or snapshot to the network storage directly Les Sg Ste _ NAS Location 1 192 168 11 50 Event ex WNAS ID Address Folder iy E Workgroup WORKGROUP I T User Name sambatest E NAS Location The location of the Samba network storage including IP address or URL and the folder the event video or snapshot will be send to this location Workgroup Type the work group this Samba network storage belon
21. an easier more efficient way to configure the IP address and network settings of the network camera in Local Network LAN The software can be installed from the attached software CD 1 Once Asoni IP Search has been successfully installed on the computer double click the Search CAM4 CAM6 NVRGLX icon on the desktop er Search CAM4_CAM6 NVR6L gt Device List IP Camera 192 168 001 200 ID Camera 192 168 001 200 IP_Camera 132 168 001 1 Click Search button to Search the IP_Camera 192 168 001 devices IP Camera 192 168 001 IP Camera 192 168 001 2 Click and select the device on the left ID Camera 192 168 001 pa ID Camera 192 168 001 IP Camera 192 168 001 IP_Camera 192 168 001 ID Camera 192 168 001 4 Click Modify button to setup the device 3 On the bottom side change the parameters ofthe selected device 5 To connect the device double click the device on the left side Es OC ce eae 192 168 1 200 HttpPort 80 PNE fa Device Name JP Canera Subnet Mask 255 255 208 0 DNS4 168 95 1 1 Search Bes 8 Sain j MACAddress 00 0F 0D 23 EF 28 Gateway 192 168 1 254 DNS2 168 95 192 1 Zon IP Search searches all the network devices which connect to the intranet and lists on the window Click Search button to search again From the list click and select the device with the MAC Address that corresponds to the device that is to be configured The netwo
22. ate Per Second ASE o CBR Highest Video Bitrate a56Kbps Video Compression Format ween v3 RTSF Path Audio Format AMR Link the camera with this address gt rtsp IP v3 2 7 H Video System NTSC 60Hz W ee TV Output Auto V auto Based on the Video System TV Output Focus Bar e on OFF Video System Select NTSC 60Hz or PAL 50Hz to match your local video system TV Output Select the video system of the analog video output signal Select Auto will follow the selection in Video System or select NTSC or PAL manually TV Output Focus Bar Click to display or hide the Focus Bar of the analog video output signal The Focus Bar is for reference when you adjust the focus Streaming 1 Output Setting 1 Basic Mode Advanced Mode Resolution 1920x1080 e Profile Baseline Frame Rate Per Second 30FFS CBR Highest Video Bitrate 3Mbps e VBR Video Quantitative 7 GOP Size 1XFPS e GOP 30 Bitrate Control Mode 9 CBR Constant BitRate O VBR Variable Bit Rate Video Compression Format H 264 RTSP Path Audio Format 6 711 Link the camera with this address gt rtsp IP Basic Advanced Mode Select the mode to configure the parameters Advanced mode provides more detail parameters for setting Resolution Select the resolution from the pull
23. cover of device 3 Push the Factory Default Button as shown on the picture below and keeping push it and don t release Factory Default Button 4 Power on the device Dont release the button during the system booting 5 It will take around 30 seconds to boot the device 6 Release the button when the device finishes proceed 7 Re login the device using the default username admin and password admin 8 The IP address is probably restored to the default in this case use IP Search utility to search the device The default IP address is 192 168 1 200 80 Compatible List of SD Card The Compatible List of SD Card Recommended Micro SD Card SanDisk 128M SanDisk 256M SanDisk 512M SanDisk 1G SanDisk 2G SanDisk 4G SanDisk 8G SanDisk 16G SanDisk 32G Transcend 4G Transcend 8G Transcend 16G Transcend 32G OO OO OO 81
24. d E Enable motion detection based on Schedule Time Set the Area To set up or clear the motion area click Draw Clear Area button on 59 Zon Set Area row and then use mouse to drag the area on the video Adjust the Sensitivity To adjust the sensitivity of detection select the level from the pull down list Activate Motion Detection To activate the motion detection enable the Detect Area check box Actions when Motion Detection is Trigger Select what actions will be taken once the motion detection is triggered in each area E mail When the motion detection is triggered in this area send the recorded video or snapshot to the specific mail address FIP When the motion detection is triggered in this area send the recorded video or snapshot to the specific FTP site Save to Samba When the motion detection is triggered in this area send the recorded video or snapshot to the Samba network storage To set the mail account FTP site and Samba network storage please refer to Configuration gt Network Setting gt Mail FTP Samba page Out1 When the motion detection is triggered in this area turn on the Digital Output 1 Save to SD Card When the motion detection is triggered in this area record the video or snapshot into the local SD card Log If Save to SD Card option has been selected for action you can determine whether send a message to the specific mail address FTP si
25. e You can type a name into this field to identify this device Show on Status Bar Determine whether show the server name on the Status Bar LED Indicator Determine whether light on or turn off the network and power status LEDs on the device OSD Setting 9 Enable Disable Time Stamp Enable this option will display the date and time on the video Position Select the display position of Time stamp Text Enable this option will display the OSD string on the video Text Edit Click this button to open Text Edit dialog window You can change the OSD string and adjust the transparency of the text After editing click Apply button rt ies dO 20 Time Setting Server Time 2010 6 3 11 5 34 Time Zone GMT 06 00 Date Format 9 vy mm dd mm dd yy dd mm vy Time Zone GMT 08 00 e iW Enable Daylight Saving Month Day of Week DST Start May Monday DST End August Monday 9 Synchronize with NTP Server NTP Server 198 1273 30 132 Update Schedule 6 Hour Time Shift 0 Minutes 1440 1440 C Synchronize with PC s Time Date 2010 5 3 Time 11 5 44 Ci Manually Input Date and Time Date 2010 6 3 Time 11 1 45 C The date and time remain the same Date Format Select the format to display the date Time Zone Select the GMT to match your time zone Enable Daylight Saving If using Daylight Saving enable this option and select the
26. e if a Micro SD Card is inserted you can record the video once an event is triggered play back and manage the recorded files in the Micro SD Card Note The Micro SD card must be formatted as FAT or FAT32 file system The use of the Micro SD Card will affect the operation of this device slightly such as affecting the frame rate of the video Install Micro SD Card Make sure the direction and pushing Micro SD card into the slot completely Record Enable Save to SD Card option in Event Setting or I O Setting page the video can be recorded into the card once the event is triggered When the Micro SD Card is full it will remove the earliest file automatically Playback When open this page the date of recorded files shows 69 Recorded Files in SD Card SD Card lt lt 239M 239M gt gt SD Card Auto Deletion a Keep 1 2 3 4 days 2010 06 03 Video 113932m avi 113942m avi 113952m avi 114002m avi 114012m avi 114022m avi 114032m avi 114042m avi 114052m avi FARA Gi 01 01 T GC GO 114102m avi The avi extension name of the file means this file is a video file the jog extension name means it is a picture file Click the file to start Microsoft Media Player to play it If the bandwidth is lower for playback directly please right click on the file and select Save As to download it to the PC and then play the downloaded file with Microsoft Media Player
27. e in light grey means the time is unselected Send Snapshot with Scheduled Time Enable Disable To enable or disable the schedule function Snapshot Select the method to send out the snapshot E mail Automatic send the snapshot to the specific mail address the interval time of the snapshot pictures is depending on the Interval setting FIP Automatic send the snapshot to the specific FTP site the interval time of the snapshot pictures is depending on the Interval setting Save to Samba Automatic send the snapshot to the Samba network storage the interval time of the snapshot pictures is depending on the Interval setting To set the mail account FTP site and Samba network storage please refer to Configuration gt Network Setting gt Mail FTP Samba page Save to SD Card Automatic save the snapshot into SD card the interval time of the snapshot pictures is depending on the Interval setting Interval The interval time of the snapshot pictures For example if the time set to 10 seconds in the scheduled time the device will send out snapshot every 10 seconds File Name The header of the filename of the snapshot For example if you input Camera in this field the filename of the snapshot will be Camera yyyymmdd hhmmss jpg yyyymmdd indicates the year month and date hhmmss indicates the hour minute and second After set up click Apply to save the settings 68 Zon Micro SD Card In this pag
28. e button to manually turn on the Relay via the built in Digital Out after the interval time is passed the Relay will be turned off automatically The interval time can be set up in Configuration gt Event Handling gt I O 18 Zon 5 Configuration Click Configuration button to get into the configuration page Click Live View button to back to the Live View page A System System Information Set up the camera name OSD on screen display information and the camera time MAC Address 00 0 HD 20 08 09 System Server Name I LED Indicator EI Information Time Stamp 9 Enable Disable 9 Topteft Top ight BottomLeft Bottom Right 9 Enable Disable OSD Dis pla Text Edit Server Time 2010 6 3 11 5 34 Time Zone GMT 08 00 Date Format yy mmfdd mm dd yy dd mmivy Time fone GMT 08 00 e Enable Daylight Saving Month Week Day of Week Time DST Start May M and Monday M 12AM DST End August ist Monday 12AM Synchronize with NTP Server NTP Server 198 123 30 132 Update Schedule 6 Hour Time Shift Minutes 1440 1440 Synchronize with PC s Time 2010 6 3 O Manually Input Date and Time Time 1495 C The date and time remain the same 19 Server Information Show on Status Bar MAC Address The MAC address of the Ethernet network card in the device Server Nam
29. e detected After set up click Apply to save the settings 53 Aisoni IP Filter Setting The IP Filter function allows you to create the IP address list to manage the clients that are allowed or denied to access this device IP Filter V Enable IP address filter Setting Allow Deny IPv4 IP Address Single addresse 192 168 1251 Allow administrator always access this device Administrator IP Address 192 168 1 250 IP Address Filter Setting Enable IP address filter Click the checkbox to enable this function IPv4 IP Address Input the IP address single or range that will be allowed or denied to access this device After input the IP address click Add to save it the IP address will be listed in IPv4 IP Address List IPv4 IP Address List Here lists the Allow Deny IP addresses To remove the IP address from the list just click Remove button on the right 54 Administrator Access Allow administrator always access this device Administrator IP Address 192 168 1 250 To always allow the administrator access this device click the checkbox to enable this function and the input the IP address of administrator After set up click Apply to save the settings 55 Zon QoS DSCP Setting DSCP Differentiated Services Code point specifies a simple mechanism for classifying and managing network traffic and provide QoS Quality of Se
30. ection is triggered send the recorded video or snapshot to the Samba network storage To set the mail account FTP site and Samba network storage please refer to Configuration gt Network Setting gt Mail F TP Samba page Out1 When the tampering detection is triggered turn on the Digital Output 1 Save to SD Card When the tampering detection is triggered record the video or snapshot into the local SD card Detection Interval The interval time of the detection When the lens of camera has been covered or moved longer than the selected time the event will be triggered Record File Setting There are 3 methods to record the event video in SD card or send out via E mail FTP e EE Record Format Video Record time PreAlarm re PostAlarm e Pre Alarm Ser Post Alarm 252 Video When an event Motion Detection or Digital Input Detection is triggered the video will be recorded as still image with AVI format The beginning and ending time of the file is depending on the Pre and Post Record Time Setting Snapshots This option is available when the Video Format of streaming 1 is set as MJPEG in Video Format When an event Motion Detection or Digital Input Detection is triggered this device will take a series of snapshot with JPG format The beginning and ending time of the snapshot pictures is depending on the Pre and Post Record 62 VW sont Time Setting Snapshot Single This opt
31. ent such as NVR or recording software Onvif Version 2 20 V L01 Disable Security C Enable 9 Disable RTSP Keepalive Enable Disable Onvif Version Select the version of Onvif standard or disable the Onvif output Security Enable or disable the Onvif security authentication RTSP Keepalive If select Enable when the NVC doesn t send the command for keeping the RTSP connection this device will terminate the RTSP connection If select Disable this device will always keep the RTSP connection If the Time out error happens on NVC side please disable this function Bonjour and LLTD Setting This device supports Bonjour and LLTD function you can configure the settings Bonjour Enable 9 Disable Bonjour Name IP Camera R00 0F 00 00 28 83 9 Enable Disable After set up click Apply to save the settings 42 Mail FTP Samba Setting To send out the event video to E mail FTP or Samba network storage please set up the configuration first Mall FIP Samba a Settee Mail FTP Samba ee emt e O Send Mail Server smtp mailserver com User Name test Password one Sender s Mail sender mailserver com Receiver s Mail receiver abcmail com Mail Port 2 DefeutPort 25 Secure Connect FIP Server ftp company com FP Port Default Port 21 S PORT Auto Create Folder by Date Yes ex Store_Path
32. essary data and then click Applyl to save the settings 51 Zon SNMP Setting SNMP Simple Network Management Protocol is an Internet standard protocol for managing devices on IP networks It is used mostly in network management systems to monitor network attached devices for conditions that warrant administrative attention SNMP exposes management data in the form of variables on the managed systems which describe the system configuration SNMP Setting aa am SNMPv3 Write Security Name write Authentication Type MD5 SHA Authentication Password Encryption Type k Encryption Password Read Security Name Authentication Type MD5 SHA Authentication Password Encryption Type i Encryption Password SNMPwv 1 v 2c Trap Trap Address Trap Community Cold Start Setting Changed Network Disconnected Trap Event v3 Authentication Failed SD Insert Remove SNMPv1 and SNMPv2 To use SNMPv1 or SNMPv2 click the checkbox to enable SNMPv1 or SNMPv2 and then input the name of Write Community and Read Community 52 soni To use SNMPV3 click the checkbox to enable SNMPv3 and then set Security Name Authentication Type Authentication Password Encryption Type Encryption Password of Write mode and Read mode SNMPv1 v2c Trap Enable SNMPv1 v2c Trap can detect the Trap server Please click the checkbox to select what event need to b
33. ferent application Outdoor Select this option for the outdoor environment and select the following options amv Shutter Time Auto Aperture Day Night Auto Select this option and the camera will adjust the shutter time automatically Aperture Select this option and the value of aperture the camera will fix the aperture and adjust the shutter time automatically Sense Up Adjust this parameter depend on the environment to get clear video Digital WDR This camera supports Digital Wide Dynamic Range provides clear images when there are both very bright and very dark areas simultaneously in the field of view of the camera Adjust this parameter depend on the environment Video Orientation Change the orientation to display the video White Balance Red Gain Adjust the gain level of red color for the automatic white balance White Balance Blue Gain Adjust the gain level of blue color for the automatic white balance Denoise This camera supports 3D and 2D Digital Noise Reduction adjust this parameter to get clear video Day Night Color Mode ICR lf the camera equips ICR IR Cut Filter you can configure this function to determine when to switch on off the ICR 34 Auto by Defined Lux Auto by Define Lux M Day Night Color Mode ICR Tf select Synchronize with Digital Input 1 the ICR will be synchronized with Digital Input 1 and the Digital Input 1 can not be
34. for connecting external amplified soeaker Digital In Out Internal terminal block provides 1 Digital in 1 Digital out Video Out 1 Analog video out BNC connector 3 Axis Gimbals Rotation 355 Adjustment Pan 360 Tilt 40 Power Supply Normal model DC 12V 1 5A PoE model built in PoE Splitter Use PoE PoE Injector IEEE 802 3af Or use Power Adaptor DC 12V 1 5A Power Consumption Max 8 Watt Ethernet 10 100 Base T Network Protocol IPv4 IPv6 HTTP HTTPS TCP IP RTP RTSP UDP 3GPP SMTP FTP samba PPPoE DHCP DDNS NTP UPnP SNMP QoS DSCP IP Filter IEEE 802 1x Bonjour Onvif Compliance Compliant with Onvif V2 20 1 01 System Video Audio Format Stream 1 Stream 2 Resolution 1920x1080 1280x720 640x480 320x240 176x144 4 Bitrate 32Kbps 10Mbps Frame Rate up to 30FPS Video Format H 264 MJPEG Audio Format G 711 64Kbps G 726 24Kbps G 726 32Kbps 3GPP Stream Resolution 640x480 320x240 176x144 Bitrate 32Kbps 1Mbps Frame Rate up to 15FPS Video Format H 264 MPEG4 Audio Format AMR Triple Streaming Triple Streaming 2 for PC live view 1 for mobile live view 3G Mobile View Supports Android iOS devices Live view with free APP CAM SMART Video Bitrate Adjustment CBR VBR Video Adjustment Brightness Contrast Hue Saturation Sharpness Gain control Shutter time Sense Up Digital WDR White Balance 3D 2D Digital Noise Reduction Day Night color mode Video
35. g to User Name Password The user name and password to log in the Samba network storage Auto Create Folder by Date If select Yes a folder will be created under the NAS Location and named with the date and then the video file will be saved in this folder If select No the video file will be saved in the NAS Location without folder After set up click Apply to save the settings Test the Settings You can click Test button this device will send a test mail to receiver s mail box or upload a test file to FTP site and the Samba network storage to make sure the 45 Zon settings of mail FTP or Samba network storage are correct 46 PPPoE DDNS Setting PPPOE amp Dynamic DNS Setting PPPoE DDNS En Setting User Name ECS PPPoE From IP Camera O0 Enable Disable Provider dyndns org Host Name test dyndns org User Name test http test dyndns org 1 Schedule Update Depends on the input time of Scheduled Update it will update DDNS s web site automatically The time range is from 5 to 5000 minutes 0 It will not update 2 dyndns org amp 3322 org Update once per day is recommended 1440 minutes per day If updated too frequently it will be blocked PPPoE Setting lf this device connects to an ADSL modem directly and want to use PPPoE connection select Enable and then set the parameters in this page 47 9 Enable Disable U
36. if compliance 2 Mega Pixel CMOS Sensor H 264 MJPEG MPEG4 compression formats and triple streaming Supports resolution up to 1920x1080 1080 P 30FPS real time Self Contained HTTP Web Server providing Internet capability for remote access 3X optical zoom Day amp Night functionality for 24 hours surveillance auto activate IR illuminator in low illumination Infrared radiant distance up to 15 meters Unbreakable housing support IP66 waterproof IK10 vandal proof standard Digital Wide Dynamic Range Shutter Speed adjustment Sense Up adjustment 3D 2D Digital Noise Reduction Day amp Night Switch time control manually Built in PoE splitter support for Power over Ethernet PoE model Supports Micro SD card for local event recording 2 way audio Zon Online firmware upgrade Free 36CH recording software Free App ICAM Smart for monitoring via Android iOS smart phone Hardware CPU RAM ROM ARM Cortex A9 256MB 16MB Image Sensor 1 2 7 CMOS 2 Mega Pixel Lens 3X zoom Lens Focal length 3 9mm Auto focus Mega Pixel lens F1 2 15 Meters Built in 18 IR LEDs IR Distance IR LED Minimum Illumination Color 0 1 lux when IR is off Mono 0 lux when IR is on Day Night Built in Mechanism IR Cut Filter ICR Shutter Time Auto Indoor Outdoor Manual 1 30 1 10000 sec Audio Input Audio Output Internal terminal block for connecting external passive type of microphone Internal terminal block
37. ill be sent Detection Interval This option provides two functions The interval time between multiple detections For example if the time set to 10 seconds when the Digital Input is triggered at time 10H 05M 10S the next trigger will be accepted after 10H 05M 20S The triggers between 10H 05M 10S to 10H 05M 19S will not be accepted lf the Out is selected for the action the Interval means Digital Output On period For example if Interval set to 20 seconds when the Digital Input is triggered the Digital Output will be On and lasting for 20 seconds and then Off automatically Enable Digital Input Detection in Schedule Time Enable this option will automatic activate the Digital Input detection with scheduled time and stop the detection in the other time Please refer to Schedule page to setup the schedule time Digital Outout Setting This section is for setup the parameters of Digital Output Note The following settings are available when manually turn on the Relay Out on Live View page Output Switch Type Select the type of the Digital Output switch On Off Switch will be triggered to On or Off constantly Time Switch will be triggered to On and lasting for a period time and then Off automatically Turn On Time If the Digital Output switch is a Time Switch the lasting time of the On period can be set here After set up click Apply to save the settings 66
38. ill cause network camera have larger load relatively CBR Constant Bit Rate Set the Video Bitrate from 32Kbps 6Mbps depend on the upload bandwidth of network The data size of video stream will be limited under the selected bit rate VBR Variable Bit Rate Set the Video Quantitative from 1 10 the higher value will get better video quality The data size of video stream is no limitation if the upload bandwidth of network is lower than the data size the video will be displayed slowly GOP Size Set the GOP Group of Picture size If you don t know what value should be set please set it to 1 X FPS MJPEG The video stream will be compressed in MJPEG format Quality 5 levels for select The higher quality will get bigger file size RTSP Path Assign a name to identify this video stream When view the video stream with RTSP connection the URL should be rtsp lt Public IP of this device gt lt RTSP port gt lt RTSP path gt 30 3GPP Streaming Output Setting ine A Enable QVGA 320x240 Resolution Frame Rate Per Second MPS CBR Highest Video Bitrate 256Kbps Video Compression Format MPEG4 dE RTSP Path Audio Format AMR Link the camera with this address g
39. ion is available when the Video Format of streaming 1 is set as MJPEG in Video Format page When an event Motion Detection or Digital Input Detection is triggered this device will take a snapshot with JPG format Pre and Post Record Time Setting Configure the record time for the event recording file For example if set Pre Alarm as 3 seconds and set Post Alarm as 5 seconds when an event Motion Detection or Digital Input Detection is triggered at time 10H 05M 105 the video will be recorded from 10H 05M 07S to 10H 05M 145 Note Limited by the built in RAM of this device when data is too much or video quality set too high it will cause recording frame drop or decrease the recording time of post alarm To avoid the frame drop situation please reduce the bitrate of the video We recommend connect the device in LAN Local Network and set the video as CBR and Bitrate less than 1 5Mbps Network Disconnection Detect m When Dis connected Record Video into SD Card After enable the check box of Record Video into SD Card when the wire network is disconnected it will save the video into local SD card Note When this event is happen the frame rate of live video and recorded video will be limited to 5FPS The longest continue record period of single video file is 20 minutes and the interval of two video files is fixed with 1 minute Specific IP Detection For the use of recording softwa
40. ly to save the settings The Status field will display the message to indicate the status of DDNS service Updating Information update Idle Stop service http lt hostname username gt lt provider gt com DDNS registration successful can now link to the camera with this URL address Update Failed the name is already registered The hostname or username has already been used Please change it Update Failed check your internet connection Network connection failed Update Failed please check the account information with you provider The input hostname username or password may be wrong 49 Zon D Network Advance Setting HTTPS Setting HTTPS Hypertext Transfer Protocol Secure is a combination of Hypertext Transfer Protocol HTTP with SSL TLS protocol It provides encrypted communication and secure identification of a network web server Https can help protect streaming data transmission over the network on the higher security level HTTPS Setting Before setting new request please remove old secure identification at Http connection type CTW S 0 GE y Created Request Input the secure identification and then click Apply to save the settings Install Certificate Country State or Province Organization weg o Days There are two ways to set Certificate Install Signed Certificate and Create Self Signed Certificate Input the nec
41. nctionalities 2 Connect Ethernet cable for network connection 3 Connect power adapter to turn on the camera 4 If the camera is PoE model the power adapter is not necessary The camera will get the power from the PoE injector or PoE switch PoE Power over Ethernet is a technology that integrates power into a standard LAN infrastructure It enables power to be provided to the network device such as an IP phone or a network camera using the same cable as that used for network connection lt eliminates the need for power outlets at the camera locations Please follow the below figure for the connection PoE Switch or PoE Injector To Network a PoE Network Camera Ethernet Cable Data only Ethernet Cable Mixed data and power Aisoni 5 Set up the network configurations according to the network environment For further explanation please refer to Network Configuration chapter Audio Connections The terminal block inside of the camera provides audio functionalities You can connect the wires of connector to this terminal block to output these signals Microphone Input Connects to a passive type of microphone Audio Output Connects to an amplified speaker I O Connections The terminal block inside of the camera also Digital Input and Digital Output You can connect the wires of connector to this terminal block to output these signals The I O connector used in application for e g motion detecti
42. on event triggering alarm notifications It provides the interface to 1 set of Digital Input Digital In GND The digital inputs for connecting devices that can toggle between an open and closed circuit such as PIRs door window Zon contacts glass break detectors etc When a signal is received the status changes and the input becomes active 1 set of Digital Output Digital Out GND The output to Relay Box or Relay Board and switch on the alarm device such as LEDs Sirens etc Digital Input Alarm Input GND Ground Initial status is LOW Alarm Max 50mA 3 3VDC Door Window Contacts Digital Output Alarm Output Relay Board or Relay Box 10 3 Axis Gimbals Adjustment Zon The gimbals adjustment offers the convenience method to install on the ceiling or wall You can open the case and adjust the lens to the direction as wished The pan tilt and rotation adjustments are provided in this model You can adjust the gimbals with Pan 360 Tilt 40 and Rotation 355 respectively Rotation Adjustment 355 1 Loosen Screw 1 2 Adjust Rotation Gimbals as wished 3 Fasten Screw 1 to fix the gimbals Pan Adjustment 360 1 Loosen Screw 2 and Screw 3 2 Adjust Pan Gimbals as wished 3 Fasten Screw 2 and Screw 3 to fix the gimbals Tilt Adjustment 1 Loosen Screw 4 and Screw 5
43. on Trigger Logs Click the View button on the right side to list the logs of motion detection Digital In Trigger Logs Click the View button on the right side to list the logs of digital input detection All Logs Click the View button on the right side to list all logs 26 Aisoni B Video Audio Setting Video Format This device supports H 264 MPEG4 and MJPEG Triple Mode and Triple Streaming set the video parameters in this page Video Format Video Format Video System NTSC 60Hz W TV Output Auto Auto Based on the Video System TV Output Focus Bar on OFF Basic Mode Advanced Mode Resolution 1920x1080 Profile Baseline Bitrate Control Mode CBR Constant Bit Rate C VBR Variable Bit Rate Frame Rate Per Second mee CBR Highest Video Bitrate Mbps e VER Video Quantitative sl GOP Size GOP 30 Video Compression Format H 254 Audio Format G 711 Link the camera with this address gt rtsp IP Basic Mode 9 Advanced Mode Close Resolution 640x480 e Profile Baseline Bitrate Control Mode CBR Constant Bit Rate VBR Variable Bit Rate Frame Rate Per Second ASFPS e CBR Highest Video Bitrate DESCH VER Video Quantitative 7 GOP Size 1x FPS GOP 20 Video Compression Format H 264 v2 Audio Format G 711 Link the camera with this address gt rtsp IP v2 Frame R
44. ons Click these buttons will perform the following functions Original Size Click this button to display the original size of video Shrink View Click this button to shrink the video to fit the window for view Full Screen Click this button or double click the video the video will change to full screen mode Press Esc key or double click the video again it will back to normal mode Snapshot Click this button to take snapshot of the video The image will be displayed in a pop up window click H to save as a jpg picture Record Click this button to record the video into the local PC It will ask you where to save the video To stop recording click this button again The saved video format is AVI The recorded file can be played by Microsoft Media Player Note H 264 decoder must be installed to play the recorded file You can install FFdshow from the included CD for the decoder Chatting The camera supports 2 way audio Click this button then you can use microphone which connected to the PC to talk to the camera side Voice Click this button to turn on the audio from camera Click again to turn off it Digital Zoom Click this button a pop up window appears You can enable Enable digital zoom disable the digital zoom and Zoom Factors 100 wee geet EE Relay Out ON OFF Switch Click the button to manually turn on off the Relay via the built in Digital Out Relay Out Time Switch Click th
45. r the connection Internet WAN s D Camera 3G Mobile Phone Configure the PPPoE Setting T Damme 00000 a ADSL Connect the camera to the ADSL modem Refer to Configuration gt Network gt PPPoE page to configure the PPPoE settings The camera will automatic dial up and get the public IP address from ISP If you have enable Send Mail After Dialed function the camera will send an email to tell you the current public IP address For example if the public IP address is 60 220 20 250 now the camera can be linked with following addresses With audio 3G Mobile rtsp 60 220 20 250 3g Phone Without audio rtsp 60 220 20 250 3gx Must enable 3GPP Stream in Configuration gt Video Audio Video Format page Using DDNS Function Since the public IP address is variable you can enable DDNS function to get a fixed URL to instead of the IP address refer to Configuration gt Network gt DDNS page to configure and enable the DDNS function 19 Aisoni After enable the DDNS assume the registered URL is test dyndns org now the camera can be linked with following URLs PC http test dyndns org ee With audio Must enable 3GPP Stream in 3G Mobile rtsp test dyndns org 3g E ER ee vonnguration gt _VIQEO AUQIO Phone Without audio sidan Wades tare rtsp test dyndns org 3gx eee 76 Aisoni C Intranet Internet Connects to Internet with Fixed
46. r visit this device without login select Yes and then click Setting to enable this function Add User To add a new user type the user name and password then click Add Set to save the user User List This table lists the current users 23 Edit To change the username and User password click Edit and modify the Username admin administrator or user in the pop up window ees Confirm Remove To remove the user click Remove 24 System Upgrade This page allows user to upgrade firmware restart device and restore the factory default settings System Upgrade System Current Firmware Version VC1 0 22 As6623 6 U p g ra d e New Firmware Firmware Upgrade The firmware can be upgraded online To update the firmware click Browse to select the new firmware file and then click Upgrade to the procedure Reboot System To restart the device click Reboot and then click Yes on the prompted window Factory Default To load the factory defaults click Default and then click Yes on the prompted window Note all settings including User account Network A V and Event settings will be restored to the factory defaults 25 System Logs System Logs System Status Logs Motion Trigger Logs System Logs Digital In Trigger Logs All Logs System Status Logs Click the View button on the right side to list the logs of system status Moti
47. re this device supports the detection of the connection of this device and PC Whenever the connection is disconnected it records the video to local SD card to make sure the video recording is continuous 63 Detect IF 9 Enable O Disable IP Address 192 158 1 10 Detection Interval 305ec e When Dis connected Record Video into SD Card Detect IP Enable Disable Select to enable or disable this function IP Address The IP address or URL of the PC which installed the recording software Detection Interval The interval time of the detection When Dis connected After enable the check box of Record Video into SD Card when the network connection of PC is disconnected it will save the video into local SD card Note When this event is happen the frame rate of live video and recorded video will be limited to 5FPS The longest continue record period of single video file is 20 minutes and the interval of two video files is fixed with 1 minute After set up click Apply to save the settings 64 Aisoni I O Setting This device provides Digital Input and Digital Output When the Digital Input is triggered it can send the video or snapshot to specific mail address transmit the video or snapshot to remote FTP server or Samba network storage trigger the digital out record video or snapshot into local SD card UO Setting Input 1 Sensor Type Input 1 Trigger Action
48. rk configuration of the selected device will show on the bottom filling in the Device Name IP Address Subnet Mask Gateway and the others Click Modify button to save the settings into the device 6 Wait for few seconds to let the device update the settings and then click Search button again to re search the network devices Double click the network device listed on the window It will open an IE browser and connect to this device directly 14 4 Live Video Start the IE browser type the IP address of the network camera in the address field http lt IP of camera gt If the HTTP Port has been changed from 80 DPE ME VALAR OO G admin http lt IP of camera gt lt HTTP Port gt care Remember my password Connect to 192 168 1 217 IP Camera After link to the camera it will show a dialogue box Key in the user name and password to log in and open the web page of camera The default user name and password are admin and admin For the first time to view the camera video via IE it will ask you to install the Activex component IP CAMERA Microsoft Internet Explorer Fie Edit View Favorites Tools Help O B ck EN ai GA P Search P Favorites Ee L da Address 4 http 192 168 1 217 CG This site might require the Following Actives control Click bere to install If you are using IE 10 click Compatibility View icon to make thi
49. rvice on IP networks DSCP is a 6 bit in the IP header for packet classification purpose Please define the reserve for Live Stream Event Alarm and Management QoS DSCP Enable QoS DSCP Live Stream Event Alarm lo O63 Setting Managements pi After set up click Apply to save the settings 56 Aisoni IEEE 802 1x Setting IEEE 802 1x is an IEEE standard for port based Network Access Control It provides an authentication mechanism to device wishing to attach to a LAN or WLAN The EAPOL protocol support service identification and optional point to point encryption over the local LAN segment supplicant Authenticator Authentication switch IEEE802 1x _ Enable IEEE 802 ix Setting Client Certificate Client Private Key Status Please check what version of the authenticator and authentication server support This device supports EAP TLS method Please enter ID password issued by the CA and then click Apply to save the settings Then upload the related certificates 57 E Event Handling Event Setting This device supports multiple event settings Event Setting Event Set Area Draw Clear Areal Draw Clear Area2 E V Detect Area 1 V Detect Area 2 Detect Area 3 L Email lee C Save to Samba IP Camera Warning 10sec a period of time between every two motions detected Enable
50. s page works properly e IP_Camera Windows Internet Ex e orer DESEN If you are using IE 11 click Tool icon which is a gear wheel and click Compatibility view settings In the dialog box add the current IP address and then click OK this web page will be displayed properly The web page of the device shows as following 15 Le C um y son Online Visitor 1 me Language Configuration zoom EI Manual Focus a Auto Focus E Home Position Speed ERY D E e e Original Full Snapshot Record Size Screen Streaming Select the streaming 1 or 2 from the pull down list to display Language Change the display language Configuration Go into the configuration page to set the parameters if necessary Status Bar Shows system date time video resolution and video refresh rate FPS Oo 6000600 Online Visitor Shows how many users connect to this network camera Zoom and Focus Click or D button to zoom in or operate the zoom i zoom out the camera Manually adiust the facile de Click or D button to adjust the focus Adjust the focus Click D button to adjust the focus OMAAN automatically D Adjust the focus Click EX button to move the zoom lens Home Position automatically SCH Ss backs to original position Adjust the speed of select the speed from the pull down list higher P the zoom movement value is faster Function Butt
51. same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet 17 Zon Set Gateway of PC and cameras with the same IP address The Gateway is the IP address of router Set Subnet Mask of Router PC and cameras Set the IP address of a valid DNS into cameras An invalid DNS will cause the domain name can t be resolved and reached such as email address Configure the cameras with different RTSP port Ex assign camera with port 554 and assign camera2 with port 555 To allow the cameras can be linked through Internet set router s NAT Network Address Translation Port Forwarding or Virtual Server as following WAN Side LAN Side Camera Pon Protec 1 Address Pont Protocol 3081 192 168 1 200 Port for Web page Camera 1 ZER 554 TCP 192 168 1 200 554 TCP EISE EES Audio 3082 192 168 1 201 80 TOP Port for Web page Camera 2 Port for Vid d uqi For example if the IP settings have been configured as the above figure the cameras can be linked with following addresses Clients in Camera Link Address Intranet ntip 1 192 168 1 200 PC ntip1 192 168 1 20 Client from Camera Link Address Internet http 60 220 20 250 3081 PC http 60 220 20 250 3082 With audio Must enable 3GPP 3G Mobile Seen rtsp 60 220 20 250 554 3g Stream in Configuration Phone Without audio Video Audio gt Video rtsp 60 220 20 250 554 3gx Format page With audio rtsp 60 220 20 25
52. ser Name adsluser Password su Send E mail after Dialed V Enable E mail Subject PPPoE From IP Camera Enable Disable Enable or disable the PPPoE connection User name Password Input the user name and password of the PPPoE connection Send E mail After Dialed If select Enable when connect to the Internet via PPPoE this device will send a mail with the Subject to a specific mail account this mail contains the public IP address of the ADSL connection To set the mail account please refer to Configuration gt Network Setting gt Mail FTP Samba page E mail Subject The subject of the E mail will be sent DDNS Setting This device supports DDNS set the parameters in this page 9 Enable Disable Provider dyndns org Host Name TE User Name test o Password weet Scheduled Update http test dyndns org Note L Schedule Update Depends on the input time of Scheduled Update it will update DDNS s web site automatically The time range is from 5 to 5000 minutes 0 It will not update dyndns org amp 3322 org Update once per day is recommended 1440 minutes per day If updated too frequently it will be blocked Zon There are several DDNS providers can be selected Select the provider from the pull down list Input Hostname User name Password and the Schedule Update time and then click Apply to connect to the DDNS provider After set up click App
53. should be rtsp lt Public IP of this device gt lt RTSP port gt lt RTSP path gt Streaming 2 Output Setting C Basic Mode Advanced Mode Close Resolution 640x480 e Profile Baseline Bitrate Control Mode 9 CBR Constant Bit Rate VBR Variable Bit Rate Frame Rate Per Second 15FPS CBR Highest Video Bitrate 517kbps e VER Video Quantitative GOF Size 1X FPS GOP 30 Video Compression Format H 24 We RTSP Path Audio Format G 711 Link the camera with this address gt rtsp IP v2 Basic Advanced Close Mode Select the mode to configure the parameters Advanced mode provides more detail parameters for setting Select Close mode will disable the streaming 2 29 Zon Resolution Select the resolution from the pull down list 1920x1080 Up to 30FPS 1280x720 Up to 30FPS 640X480 Up to 30FPS 320X240 Up to 30FPS e 176X144 Up to 30FPS Frame Rate Per Second The video refreshing rate per second Select the frame rate from the pull down list Note when the Resolution of streaming 1 is 1920x1080 or 1280x720 the highest FPS of streaming 2 will be reduced Video Compression Format Choose H 264 or MJPEG format to compress and output the video stream H 264 The video stream will be compressed in H 264 format Profile Provides Baseline Main and High profile High and Main profile can deliver better video quality but it w
54. start and end time Synchronize with NTP Server Select this option and type the IP address of a NTP Network Time Protocol server this device will synchronize the time with the NTP server via network NTP Server Type the IP address or URL of the NTP server Update Schedule Select the interval for the update time For example if select 6 Hours this device will synchronize the date and time with the NTP server every 6 hours Synchronize with PC s time Select this option will synchronize the device time with the PC s time Manually Input Date and Time Manually input the date and time 21 Zon The date and time remain the same Keep the current date and time without change After set up click Apply to save the settings 22 Aisoni User Management You can add remove and manage the users in this page This device supports 3 user groups Administrator The administrator can view operate and configure all functions and settings of this device Guest The users in Guest group can only view the live video in Live View page Anonymous The anonymous user can only view the live video in Live View page The privilege is same as Guest group User Yes 9 No Management User Name Password TET Confirm Password oon Add Set User Name User Group Modify Remove admin Administrator Edit guest Guest Edit Remove Anonymous User Login To allow use
55. t cable Refer to Configuration Network gt Network page to configure the IP settings Please make sure the IP address of PC and camera are in the same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet Set Subnet Mask of PC and camera Clear the Gateway of PC and camera to empty For example if the IP settings have been configured as the above figure the cameras can be linked with following addresses 72 Zon Connects to an Exist LAN If the camera will be used in a local network LAN and don t allow to access via Internet please refer to the figure below for the connection Intranet LAN Camera 1 IP Address 192 168 1 200 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Http Port 80 RTSP Port 554 Camera 2 IP Address 192 168 1 201 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Http Port 80 RTSP Port 554 Connect the cameras to the Switch e e A or IP Sharing IP Address 192 168 1 254 Subnet Mask 255 255 255 0 IP Address 192 168 1 2 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Refer to Configuration gt Network gt Network page to configure the IP settings Please make sure the IP address of Router PC and camera are in the same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet Set Subnet Mask of Router PC and cameras Set Gateway of PC and cameras with the same IP address Usually the Gateway is the
56. t rtsp IP v3 After enable the 3GPP streaming it will enable this device to send out the video in 3GPP format and you can view the live video on the 3G mobile device Resolution Select the resolution from the pull down list 640X480 Up to 15FPS 320X240 Up to 15FPS 176X144 Up to 15FPS Frame Rate Per Second The video refreshing rate per second Select the frame rate from the pull down list Video Compression Format Choose H 264 or MPEG4 format to compress and output the video stream CBR Set the Video Bitrate from 32Kbps 1Mbps depend on the upload bandwidth of network The data size of video stream will be limited under the selected bit rate RTSP Path Assign a name to identify this video stream When view the video stream with RTSP connection the URL should be rtsp lt Public IP of this device gt lt RTSP port gt lt RTSP path gt View Live Video with iPhone and iPad To view the live video with a iOS mobile device iPhone or iPad open Safari web browser in the mobile phone type the URL as following to link and view the live video http lt Public IP of camera gt lt HTTP port gt lt Public IP of camera gt The public IP address of the camera lt HTTP port gt The HTTP port of the camera This port is assigned in Configuration gt Network Setting gt Network Setting
57. te or Samba network storage E Mail Subject The subject of the E mail will be sent Detection Interval This option provides two functions The interval time between multiple detections For example if the time set to 10 seconds when the motion detection is triggered at time 10H 05M 10S the next detection will be accepted after 10H 05M 20S The detections between 10H 05M 10S to 10H 05M 19S will not be accepted lf the Out is selected for the action the Interval means Digital Output On period For example if Interval set to 20 seconds when the motion detection is triggered the Digital Output will be On and lasting for 20 seconds and then Off automatically Enable Motion Detection in Schedule Time Enable this option will automatic activate the motion detection with scheduled time and stop the detection in the other time Please refer to Schedule page to setup the schedule time 60 Aisoni To ensure the Motion Detection works well and avoid unnecessary trigger please follow the rules to draw the Motion Detection Areas Recommendation of Motion Detection Area The moving object larger than the 50 of the Motion Detection Area it will be detected and the Motion Detection is triggered The moving object smaller than the 50 of the Motion Detection Area it will not be detected and the Motion Detection will not be triggered Recommend use 3 smaller Motion Detection Areas to replace a
58. this device can 39 isoni be linked from Internet HTTPS Port Set the port for HTTPS connection The default is 443 change the port if you want to use router s NAT Network Address Translation to make this device can be linked from Internet UPnP Setting UPnP 9 Enable Disable UPnP Port Forwarding Enable 9 Disable External HTTP Port GU External HTTPS Port 445 External RTSP Port 554 UPnP Enable or disable the UPnP protocol This device supports UPnP if the UPnP service is enabled on your computer the device will automatically be detected and a new icon will be added to My Network Places Note UPnP service must be enabled on your computer The Windows Vista and Windows 7 have enabled UPnP service by default To activate UPnP service in Windows XP please follow the procedure 1 Open the Control Panel from the Start menu 2 Select Add Remove Programs 3 Select Add Remove Windows Components and open Networking Services section 4 Click Details and select UPnP to setup the service 5 The network device icon will be added to My Network Places 6 You may double click the ne
59. twork device icon to access it via IE browser UPnP Port Forwarding Enable or disable the UPnP Port Forwarding function The UPnP Port Forwarding function provides an easy way to configure the NAT Network Address Translation in router If the router equips UPnP Port Forwarding function too this device will ask the router to open the External HTTP Port External HTTPS Port and External RTSP Port for this device automatically Therefore you dont need to configure the Port Forwarding manually Note Not all routers equip UPnP Port Forwarding function The device will report whether this function is successful after click Apply button 40 RTSP Server Setting RTSP Server Enable C Disable RTSP Authentication Disable RTSP Port 554 em Start Port 5000 1024 9397 em End Port 9000 1027 10000 RTSP Server The video stream can be direct retrieve via RTSP connection you can close this function by disable this option RTSP Authentication If you select and enable this function the remote client must meet the authentication to retrieve video stream via RTSP connection RTSP Port Set the port for transfer the video and audio The default is 554 change the port if you want to use router s NAT Network Address Translation to make this device can be linked from Internet RTP Port Set the port range of RIP port In RTSP mode you
60. used by user for other purpose Color when over 7lux Mono whenunder 3lux Current Lux About 13 lux Refresh You can define the Lux of environment to change the color mode automatically When the environment is brighter than Color when over the video will display in color when the environment is darker than Mono when under the video will display in mono color black and white Define Lux You can click Refresh button to detect the current Lux of environment Always Color The video will always display in color Always Mono The video will always display in mono color black and white Auto by Defined Time Auto by Define Time M Day Night Color Mode ICR Tf select Synchronize with Digital Input 1 the ICR will be synchronized with Digital Input 1 and the Digital Input 1 can not be used by user for other purpose Color start from 05 00 Mono start from 17 00 HH MM Define Time D Save Time Settings You can define the period to change the color mode automatically To set the time type the time in Color start from and Mono start from fields and then click Save Time Settings to save the configuration Synchronize with Digital Input 1 The ICR will be synchronized with Digital Input 1 and the Digital Input 1 cannot be used by user for other purpose This option is for specific camera model please do not select this option with this camera

CAM6623F User`s Manual (English)

Contents

Download Pdf Manuals

Related Search

Related Contents