Home
Installation Manual JY992D93901-E
Contents
1. refer to the manual for F9GT 40FMB 6 Maintenance Cautions A e Correctly connect the battery for memory backup Never charge disassemble heat burn or short circuit the battery If the battery is handled in such a way or fire may be caused e Always power OFF and remove the GOT from the panel before starting replacement of the battery If this is not the case electrical shock may be sustained e Never disassemble or modify the GOT Disassembly or modification may cause failure malfunction or fire For repair please contact a service representative Note Turn off the power before connecting disconnecting cables Connecting disconnecting cables while the power is turned on will cause failure or malfunction When repairing the backlight and liquid crystal screen please contact a service representative 6 1 Battery Replacement When the battery voltage drops a control device system information set by the screen design software turns ON The control device interlocks with an auxiliary relay in the PLC It is recommended to provide a lamp while utilizing the output of the PLC so that voltage drop can be monitored outside the GOT For details of control devices refer to the GOT F900 Series Operation Manual Note For approximately one month after the control device system information for battery voltage drop turns ON the battery will back up the alarm history sampling and the current time When the control device
2. DC power supply e Perform Class D 100 or less grounding with an electric wire of at least 1 25 mm2 Never perform common grounding of the GOT and a strong power system Note e Use an external power supply to provide 24V DC The service power supply of the programmable controller cannot be used e Even if instantaneous power interruption of less than 1 ms occurs the GOT continues to operate When power interruption for a considerable period of time or voltage drop occurs the GOT stops its operation However when the power supply is recovered the GOT automatically restarts its operation The screen displayed just after recovery is determined by the working environment originally set 24V DC external power supply Grounding resistance 100Q or less class D Fuse 2A L24V DC PLC GOT 5 Expansion Module F9GT 40FMB FOGT 40FMB has a built in flash memory and can transfer screen data when installed in the GOT When installed in the OS earlier than version 1 40 screen display is not available while transferring data from F9OGT 40FMB to the GOT For the use methods and specifications refer to the manual for F9GT 40FMB 6 Maintenance Cautions A e Correctly connect the battery for memory backup Never charge disassemble heat burn or short circuit the battery If the battery is handled in such a
3. and property damage A 2 Indicates that the identified danger could POSSIBLY cause physical and property damage e Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage that may arise as a result of the installation or use of this equipment All examples and diagrams shown in this manual are intended only as an aid to understanding the text not to guarantee operation Mitsubishi Electric will accept no responsibility for actual use of the product based on these illustrative examples e Owing to the very great variety in possible application of this equipment you must satisfy yourself as to its suitability for your specific application Associated Manuals Lo Manual Name Manual Number Description F940WGOT Series Describes the specifications wiring and F940GOT TWD installation of F940WGOT Series graphic Installation Manual operation terminal hardware GOT F900 OPERATION MANUAL describes GT Designer2 JY997D93901 Describes the operation and use of the GOT F900 Series graphic operation terminals and GT Designer2 JY997D09101 separate volume Describes the operation and use of the GOT F900 Series graphic operation terminals GT Designer and FX PCS DU WIN E GOT F900 Series Operation Manual JY992D94701 separate volume GOT F900 Series Hardware Manual connection diagram JY992D94801 separate volume Describes wiring and installation of the GOT F900 Se
4. ports PPot po Cescription RS 422 port for connecting PLC including1 N connection or communication COMO l computer link unit lt 9 pin D sub gt RS 232C port for connecting PLC including1 N connection printer or bar code COM1 reader lt 9 pin D sub gt RS 232C port for connecting personal computer printer or bar code reader COM2 lt 9 pin D sub gt d Mounting bracket and tightening bolt e PM 20BL battery f DC power supply terminal M3 g Communication cable h Packing seal 2 Specifications 2 1 General Specifications Horizontal mounting 0 50 C 32 122 F Vertical and flat mounting 0 40 C 32 104 F 20 60 C 4 140 F 35 85 Relative Humidity No condensation Must be free of lamp black corrosive gas flammable gas or excessive Operating atmosphere amount of electroconductive dust particles and must be no direct sunlight Same as for saving 10 57 Hz 0 075 mm Half Amplitude 57 150 Hz 9 8 m s Acceleration Sweep Count for X Y Z 10 times 80 min in each direction Vibration Resistance intermittent vibration 10 57 Hz 0 035 mm Half Amplitude Vibration Resistance Continuous vibration 57 150 Hz 4 9 m s Acceleration Sweep Count for X Y Z 10 times 80 min in each direction 147m s Acceleration 1000 Vp p 1micro Second 30 100 Hz tested by noise simulator 2 2 Power Supply Specifications Specifications Power Supply Voltage 2
5. sure that the thickness of the panel surface is no more than 5 mm 0 20 2 Inserting the GOT into the panel surface Attach the packing seal to the GOT and insert the GOT from the front face of the panel surface a Packing seal b GOT c Mounting slot 3 Fixing the GOT Put hooks of the mounting brackets supplied in to the mounting holes of the GOT Tighten mounting bolts also supplied until the GOT is securely fixed Fix mounting bolts in all four positions above and below the GOT a Clamping bolt b Mounting bracket Note Make sure to tighten the clamping bolts with a torque of 0 3 0 5 N m 4 Dimensions required inside the panel for installation When installing the GOT make sure that the inner dimensions shown on the right are available 225 8 86 70 6 2 78 a PLC connection cable 143 5 63 b Packing seal 4 Power Supply Wiring Caution A Cut OFF all external phases of power source before installation or wiring to avoid electric shock or serious damage to the product Note e Wire the power supply using electric wires of 0 75 mm or more so that voltage drop will not occur Use M8 size crimp style terminals Securely tighten crimp style terminals with a torque of 0 5 0 8 N m so that errors can be avoided e Insure correct termination of the DC power source incorrect connection may result in unit failure serious damage to the GOT e Attach a 2 A fuse to the 24V
6. way or fire may be caused e Always power OFF and remove the GOT from the panel before starting replacement of the battery If this is not the case electrical shock may be sustained e Never disassemble or modify the GOT Disassembly or modification may cause failure malfunction or fire For repair please contact a service representative Note Turn off the power before connecting disconnecting cables Connecting disconnecting cables while the power is turned on will cause failure or malfunction When repairing the backlight and liquid crystal screen please contact a service representative 6 1 Battery Replacement When the battery voltage drops a control device system information set by the screen design software turns ON The control device interlocks with an auxiliary relay in the PLC It is recommended to provide a lamp while utilizing the output of the PLC so that voltage drop can be monitored outside the GOT For details of control devices refer to the GOT F900 Series Operation Manual Note For approximately one month after the control device system information for battery voltage drop turns ON the battery will back up the alarm history sampling and the current time When the control device turns ON replace the battery PM 20BL as soon as possible The screen data is stored in the flash memory therefore data will remain even after severe battery voltage loss 6 1 1 Replacement Procedure 1 Turn off the p
7. 4V DC 10 15 Power Supply Ripple 200 mV or less Ratings 650 mA at 24V DC Current Consumption 750 mA at 24V DC or less when power supply is turned ON 400 mA at 24 V DC when backlight is turned OFF Fuse Fuse built in GOT impossible to change Max Allowable Momentary 1 ms If less than 1 ms the GOT will continue operation If 1 ms or Power Supply Failure period more the GOT will shut down Built in PM 20BL type lithium battery Approximately 5 years life 2 3 Screen Hardware Specifications Specifications Display Device TFT colour liquid crystal 480 x 234 dot 60 characters x 14 lines Dot Pitch 0 324 mm 0 013 Horizontal x 0 375 mm 0 015 Vertical Actual character size ratio 1 1 16 Effective Display Size 155 5 mm 6 12 x 87 8 mm 3 46 7 inch type Number of Colours 256 colours Life of liquid crystal ee Ores q y Operating temperature 25 C 77 F Backlight Cold cathode tube oe oh Maximum 50 touch keys screen 30 x 12 matrix RS 422 Interface RS 232C RS 232C Numberoi coreene User screen 500 screens or less System screen Allocated screens No 1001 1030 Flash memory 1MB built in e Bright dots always lit and dark dots unlit may appear on a liquid crystal display panel It is impossible to completely avoid this symptom as the liquid crystal display comprises of a great number of display elements Flickers may be observed depending on the display color Please note that these
8. Changes for the Better a MITSUBISHI GRAPHIC OPERATION TERMINALS MELSEGGOT cor F900 This manual contains text diagrams and explanations which will guide the reader in the correct installation safe use and operation of the F940WGOT TWD E and should be read and understood before attempting to install or use the unit Further information can be found in the associated manuals list below F940WGOT Series F940WGOT TWD Installation Manual JY992D93901E Specifications are subject to change without notice Guidelines for the Safety of the User and Protection of the F940WGOT Series This manual has been written to be used by trained and competent personnel The definition of such a person or persons is as follows a Any engineer using the product associated with this manual should be of a competent nature trained and qualified to the local and national standards These engineers should be fully aware of all aspects of safety with regards to automated equipment b Any commissioning or service engineer must be of a competent nature trained and qualified to the local and national standards c All operators of the completed equipment should be trained to use that product in a safe and co ordinated manner in compliance to established safety practices Note The term completed equipment refers to a third party constructed device which contains or uses the product associated with this manual Note s on the Symbols Used
9. PLC The connector on the GOT side is wired straight through Cable length is 3m 9 10 Communication cable GOT lt gt CPU port in FXo FXos FX1S FXon FX1N FX2N or FX2NC series PLC FX 50DU CABO M The connector on the GOT side is wired straight through M is cable length 1M 1m 3 3 10M 10m 32 9 20M 20m 65 7 30M 30m 98 5 Communication cable GOT lt gt CPU port in FX FX2c A or QnA series PLC FX 40DU CAB The connector on the GOT side is wired straight through Cable length is 3m 9 10 Communication cable GOT lt gt CPU port in FX FX2c A or QnA series PLC FX 40DU CAB M The connector on the GOT side is wired straight through M is cable length 10M 10m 82 9 20M 20m 65 7 30M 30m 98 5 FX 50DU CABO FX 50DU CABO EN Communication cable GOT gt CPU port in Q series PLC l The connector on the GOT side wired straight through Cable length is 3m 9 10 Data exchange cable GOT lt gt Personal computer lt 9 pin D sub gt Battery for Alarm history sampling and current time data retention FOWGT 40PSC Transparent protection sheet for F940WGOT 5 pieces F9OGT 40FMB Data transfer adapter Flash memory built in gt Caution A During abnormal communication including cable breakages ages when monitor within the GOT communication between the GOT and programmable controller CPU is interrupted It is impossible to operate switches or devices in the PLC thr
10. ay not disappear e Using the GOT Backlight OFF function can prolong the life of the backlight For details on the Backlight OFF function refer to the following GOT F900 Series OPERATION MANUAL GOT F900 Series OPERATION MANUAL GT Designer2 Version Number of Screens 3 Installation Note AN e Do not mount the GOT in an environment that contains dust soot corrosive or conducive dust corrosive or flammable gas or expose the unit to high temperatures dew condensation direct sunlight rain wind or impact and vibration If the GOT is used in such a place electrical shock fire malfunction damages or deterioration may caused e Never drop cutting chips or electric wire chips into the ventilation window of the GOT when drilling screw holes or performing wiring Such chips may cause fire failure or malfunction e Turn off the power before securely connecting any cables Poor connection may cause malfunction The GOT is designed to be mounted in a panel Install it using the following procedure 1 Preparing the panel surface Unit mm inches On the panel surface cut a rectangular mounting slot of the Ns dimensions shown on the right S At this time space of 10 mm is required at each of the top and the Sictiobecatonparel bottom of the slot inside the panel for metal fixtures as shown in 8 4 Dimensions required inside the panel for installation N 206 8 1 1 A 0 04 Note e Make
11. dots appear due to its characteristic and are not caused by product defect e When the same screen is displayed for a long time an incidental color or partial discoloration is generated on the screen due to heat damage and it may not disappear e Using the GOT Backlight OFF function can prolong the life of the backlight For details on the Backlight OFF function refer to the following GOT F900 Series OPERATION MANUAL GOT F900 Series OPERATION MANUAL GT Designer2 Version 3 Installation Note AN e Do not mount the GOT in an environment that contains dust soot corrosive or conducive dust corrosive or flammable gas or expose the unit to high temperatures dew condensation direct sunlight rain wind or impact and vibration If the GOT is used in such a place electrical shock fire malfunction damages or deterioration may caused e Never drop cutting chips or electric wire chips into the ventilation window of the GOT when drilling screw holes or performing wiring Such chips may cause fire failure or malfunction e Turn off the power before securely connecting any cables Poor connection may cause malfunction The GOT is designed to be mounted in a panel Install it using the following procedure 1 Preparing the panel surface Unit mm inches On the panel surface cut a rectangular mounting slot of the Ns dimensions shown on the right S At this time space of 10 mm is required at each of the top and the Si
12. eader lt 9 pin D sub gt RS 232C port for connecting personal computer printer or bar code reader COM2 lt 9 pin D sub gt d Mounting bracket and tightening bolt e PM 20BL battery f DC power supply terminal M3 h Packing seal g Communication cable 2 Specifications 2 1 General Specifications E nee Horizontal mounting 0 50 C 32 122 F Vertical and flat mounting 0 40 C 32 104 F 20 60 C 4 140 F 35 85 Relative Humidity No condensation Must be free of lamp black corrosive gas flammable gas or excessive amount of electroconductive dust particles and must be no direct sunlight Same as for saving 10 57 Hz 0 075 mm Half Amplitude 57 150 Hz 9 8 m s Acceleration Sweep Count for X Y Z 10 times 80 min in each direction 10 57 Hz 0 035 mm Half Amplitude 57 150 Hz 4 9 m s Acceleration Sweep Count for X Y Z 10 times 80 min in each direction 147m s Acceleration 1000 Vp p 1micro second 30 100 Hz tested by noise simulator Operating Temperature Operating atmosphere Vibration Resistance intermittent vibration Vibration Resistance Continuous vibration P OOF 2 2 Power Supply Specifications Specifications Power Supply Voltage 24V DC 10 15 Power Supply Ripple 200 mV or less Ratings 650 mA at 24V DC Current Consumption 750 mA at 24V DC or less when power supply is turned ON 400 mA at 24 V DC when backlight is turned OFF F
13. h a torque of 0 5 0 8 N m so that errors can be avoided e Insure correct termination of the DC power source incorrect connection may result in unit failure serious damage to the GOT e Attach a 2 A fuse to the 24V DC power supply e Perform Class D 1002 or less grounding with an electric wire of at least 1 25 mm2 Never perform common grounding of the GOT and a strong power system Note e Use an external power supply to provide 24V DC The service power supply of the programmable controller cannot be used e Even if instantaneous power interruption of less than 1 ms occurs the GOT continues to operate When power interruption for a considerable period of time or voltage drop occurs the GOT stops its operation However when the power supply is recovered the GOT automatically restarts its operation The screen displayed just after recovery is determined by the working environment originally set Grounding resistance 24V DC external 100Q or less class D power supply Fuse 2A L24V DC PLC GOT 5 Expansion Module F9GT 40FMB FOGT 40FMB has a built in flash memory and can transfer screen data when installed in the GOT When installed in the OS earlier than version 1 40 screen display is not available while transferring data from F9OGT 40FMB to the GOT For the use methods and specifications
14. he F940WGOT series hereafter called GOT is to be mounted on the face of a control panel or operations panel and connected to the programming port CPU port or the communication port communication port of a PLC Various devices can be monitored and PLC data changed Programming through the GOT screens Several display screens are built in to port the GOT and additional personalized screens can be created by the user 1 The GOT can connect to MELSEC FX A QnA and Q PLCs as well as a host of third party manufactured units Further GOT information can be found in GOT F900 Series Hardware Manual PLC 2 PLC user programs can be downloaded uploaded and monitored using programming software GX Developer or FX PCS WIN E on a personal computer via the GOT Further information can be found in GOT F900 Series Operation Manual 3 Display screens are created using the following software Software Name Version GT Designer2 swa D5cC GTD2 E GOT F900 and GOT A900 Series for Windows screen creation software 0O indicates version GT Designer SWUID5C GOTR PACKE 0O indicates version GOT F900 and GOT A900 Series for Windows screen creation software SW5 F edition of SW5D5C GOTR PACKE version 5 05F or later GOT F900 Series for Windows screen creation software PAPES DUAMINEE SWOPC FXDU WIN E version 2 50 or later 1 1 Product Lists Production Name Description F940WGOT TWD E Graphic operation terminal mai
15. in this Manual At various times through out this manual certain symbols will be used to highlight points of information which are intended to ensure the users personal safety and protect the integrity of equipment 1 Indicates that the identified danger WILL cause physical and property damage damage A 2 Indicates that the identified danger could POSSIBLY cause physical and property e Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage that may arise as a result of the installation or use of this equipment All examples and diagrams shown in this manual are intended only as an aid to understanding the text not to guarantee operation Mitsubishi Electric will accept no responsibility for actual use of the product based on these illustrative examples e Owing to the very great variety in possible application of this equipment you must satisfy yourself as to its suitability for your specific application Associated Manuals Lo Manual Name Manual Number Description F940WGOT Series Describes the specifications wiring and F940GOT TWD JY997D93901 installation of F940WGOT Series graphic Installation Manual operation terminal hardware GOT F900 JY997D09101 Describes the operation and use of the GOT OPERATION MANUAL F900 Series graphic operation terminals and GT describes GT Designer2 epee Vome Designer Describes the operation and use of the GOT F900 Series graphic operation
16. monitored and PLC data changed through the GOT screens Several display screens are built in to port the GOT and additional personalized screens can be created by the user 1 The GOT can connect to MELSEC FX A QnA and Q PLCs as well as a host of third party manufactured units Further information can be found in GOT F900 Series Hardware Manual 2 PLC user programs can be downloaded uploaded and monitored using programming software GX Developer or FX PCS WIN E on a personal computer via the GOT Further information can be found in GOT F900 Series Operation Manual 3 Display screens are created using the following software GT Designer2 SWUID5C GTD2 E 0O indicates version GOT F900 and GOT A900 Series for Windows screen creation software GT Designer SWLUID5C GOTR PACKE 0O indicates version GOT F900 Series for Windows screen creation software PS Ue SWOPC FXDU WIN E version 2 50 or later GOT F900 and GOT A900 Series for Windows screen creation software SW5 F edition of SW5D5C GOTR PACKE version 5 05F or later 1 1 Product Lists Description Production Name F940WGOT TWD E Graphic operation terminal main unit Communication cable GOT lt gt CPU port in FXo FXos FX1S FXon FX1N FX2N or FX2NC series PLC The connector on the GOT side is wired straight through Cable length is 3m 9 10 Communication cable GOT lt gt CPU port in FXo FXos FX1S FXon FX1N FX2N or FX2NC series
17. n unit Communication cable GOT lt gt CPU port in FXo FXos FX1S FXon FX1N FX2N or FX2Nc series PLC The connector on the GOT side is wired straight through Cable length is 3m 9 10 Communication cable GOT lt gt CPU port in FXo FXos FX1S FXon FX1N FX2N or FX2Nc series PLC The connector on the GOT side is wired straight through Cable length is 3m 9 10 Communication cable GOT lt gt CPU port in FXo FXos FX1S FXon FX1N FX2N or FX2Nc series PLC FX 50DU CABO M The connector on the GOT side is wired straight through M is cable length 1M 1m 3 3 10M 10m 32 9 20M 20m 65 7 30M 30m 98 5 Communication cable GOT lt gt CPU port in FX FX2c A or QnA series PLC FX 40DU CAB The connector on the GOT side is wired straight through Cable length is 3m 9 10 Communication cable GOT lt gt CPU port in FX FX2c A or QnA series PLC FX 40DU CAB M The connector on the GOT side is wired straight through M is cable length 10M 10m 32 9 20M 20m 65 7 30M 30m 98 5 FX 50DU CABO FX 50DU CABO EN Communication cable GOT gt CPU port in Q series PLC l The connector on the GOT side wired straight through Cable length is 3m 9 10 Data exchange cable GOT lt Personal computer lt 9 pin D sub gt Battery for Alarm history sampling and current time data retention FOWGT 40PSC Transparent protection sheet for F940WGOT 5 pieces F9GT 40FMB Data transfe
18. ood before attempting to install or use the unit Further information can be found in the associated manuals list below F940WGOT Series F940WGOT TWD Installation Manual JY992D93901E Specifications are subject to change without notice Guidelines for the Safety of the User and Protection of the F940WGOT Series This manual has been written to be used by trained and competent personnel The definition of such a person or persons is as follows a Any engineer using the product associated with this manual should be of a competent nature trained and qualified to the local and national standards These engineers should be fully aware of all aspects of safety with regards to automated equipment b Any commissioning or service engineer must be of a competent nature trained and qualified to the local and national standards c All operators of the completed equipment should be trained to use that product in a safe and co ordinated manner in compliance to established safety practices Note The term completed equipment refers to a third party constructed device which contains or uses the product associated with this manual Note s on the Symbols Used in this Manual At various times through out this manual certain symbols will be used to highlight points of information which are intended to ensure the users personal safety and protect the integrity of equipment 1 Indicates that the identified danger WILL cause physical
19. oto becabonpanel ao bottom of the slot inside the panel for metal fixtures as shown in 8 4 Dimensions required inside the panel for installation lt N ny 1 0 04 206 8 11 Note e Make sure that the thickness of the panel surface is no more than 5 mm 0 20 2 Inserting the GOT into the panel surface Attach the packing seal to the GOT and insert the GOT from the front face of the panel surface a Packing seal b GOT c Mounting slot 3 Fixing the GOT Put hooks of the mounting brackets supplied in to the mounting holes of the GOT Tighten mounting bolts also supplied until the GOT is securely fixed Fix mounting bolts in all four positions above and below the GOT a Clamping bolt b Mounting bracket Note Make sure to tighten the clamping bolts with a torque of 0 3 0 5 Nem 4 Dimensions required inside the panel for installation When installing the GOT make sure that the inner dimensions shown on the right are available 225 8 86 70 6 2 78 a PLC connection cable b Packing seal 5 0 20 or less ID b 4 Power Supply Wiring Caution A Cut OFF all external phases of power source before installation or wiring to avoid electric shock or serious damage to the product Note e Wire the power supply using electric wires of 0 75 mm or more so that voltage drop will not occur Use M8 size crimp style terminals Securely tighten crimp style terminals wit
20. ough the GOT Communication and normal operation resumes when the GOT system is correctly configured DO NOT configure emergency stop or safety features to operate through the GOT and be sure that there is no adverse consequences in the event of a GOT PLC communications malfunction Note AN e Do not lay signal cables near high voltage power cables or allow them to share the same trunking duct otherwise effects of noise or surge induction are likely to take please Keep a safe distance of more than 100 mm from these wires e Operate touch switches on the display screen by hand DO NOT use excessive force or attempt operate them with hard or pointed objects The tip of a screw driver pen or similar object for example may break the screen 1 2 Dimensions and Each Part Name MASS Weight 1 kg 2 2 Ibs Mounting brackets Tightening bolt M3 6 bolts Packing seal for dust and water resistance Dimensions mm inches Accessory a c 133 5 24 E 215 8 46 a 2 78 143 5 63 23 0 91 205 8 07 34 5 1 35 7 5 0 20 or ess lt a Display b Mounting bracket hole c Communication ports Port Description RS 422 port for connecting PLC including1 N connection or communication COMO l l l computer link unit lt 9 pin D sub gt COMI RS 232C port for connecting PLC including1 N connection printer or bar code r
21. ower to the GOT and remove the battery holder cover 2 Remove the existing battery from the battery holder and disconnect 3 Within 30 seconds connect a new battery 4 Insert the new battery into the battery holder and attach the cover PM 20BL Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi opportunity loss or lost profits caused by faults in the Mitsubishi products damage secondary damage accident compensation caused by special factors unpredictable by Mitsubishi damages to products other than Mitsubishi products and to other duties For the detailed warranty refer to the GOT F900 Series HARDWARE MANUAL CONNECTION Manual number JY992D93901 Manual revision E Date Sep 2008 a MITSUBISHI ELECTRIC CORPORATION HEAD OFFICE TOKYO BUILDING 2 7 3 MARUNOUCHI CHIYODA KU TOKYO 100 8310 JAPAN HIMEJI WORKS 840 CHIYODA CHO HIMEJI JAPAN
22. r adapter Flash memory built in gt Caution A During abnormal communication including cable breakages ages when monitor within the GOT communication between the GOT and programmable controller CPU is interrupted It is impossible to operate switches or devices in the PLC through the GOT Communication and normal operation resumes when the GOT system is correctly configured DO NOT configure emergency stop or safety features to operate through the GOT and be sure that there is no adverse consequences in the event of a GOT PLC communications malfunction Note e Do not lay signal cables near high voltage power cables or allow them to share the same trunking duct otherwise effects of noise or surge induction are likely to take please Keep a safe distance of more than 100 mm from these wires e Operate touch switches on the display screen by hand DO NOT use excessive force or attempt operate them with hard or pointed objects The tip of a screw driver pen or similar object for example may break the screen 1 2 Dimensions and Each Part Name Dimensions mm inches MASS Weight 1 kg 2 2 Ibs Accessory Mounting brackets Tightening bolt M3 6 bolts Packing seal for dust and water resistance a c b m 9 3 5 E J 70 6 215 8 46 a 2 78 23 0 91 23 0 91 205 8 07 a Display b Mounting bracket hole c Communication
23. ries graphic operation terminals PDF files on CD ROM included with product PDF files on CD ROM included with product Included with the screen creation software JY992D68301 included with the screen creation software Describes the operation of GT Designer2 SW D5C GTD2 E and data transfer to the GOT 900 Series GT Designer2 Version1 Operating Manual GT Designer2 Version1 Reference Manual Describes the specifications and setting of object functions in GT Designer2 SW D5C GTD2 E Describes the operation of GT Designer SW D5C GOTR PACKE and data transfer to the GOT 900 Series Refer to the help file GT Designer Operating Manual FX PCS DU WIN E SOFTWARE MANUAL Describes the operation of FX PCS DU WIN E screen creation software Manual Name Manual Number Description This manual contains explanations for installation FOGT 40FMB User s Manual JY992D98601 and operating procedures of the F9GT 40FMB data transfer adapter Indispensable manual O Either manual is necessary O Refer if necessary please Refer to the Programming manual II or relevant hardware manuals for details concerning the applicable PLC 1 Introduction The F940WGOT series hereafter called GOT is to be mounted on the face of a control panel or operations panel and connected to the programming port CPU port or the communication port communication port of a PLC Various devices can be
24. terminals GT Designer and FX PCS DU WIN E GOT F900 Series JY992D94701 Operation Manual separate volume GOT F900 Series Hardware Manual connection diagram JY992D94801 Describes wiring and installation of the GOT separate volume F900 Series graphic operation terminals PDF files on CD Describes the operation of GT Designer2 ROM included with SW D5C GTD2 E and data transfer to the product GOT 900 Series GT Designer2 Version1 Operating Manual l l PDF files on CD NRO GT Designer2 Version1 ROM included with Describes the specifications and setting of object Reference Manual functions in GT Designer2 SW D5C GTD2 E product Included with the Describes the operation of GT Designer screen creation SW D5C GOTR PACKE and data transfer to software the GOT 900 Series Refer to the help file JY992D68301 FX PCS DU WIN E included with the Describes the operation of FX PCS DU WIN E SOFTWARE MANUAL screen creation screen creation software software GT Designer Operating Manual ae Manual Name Manual Number Description This manual contains explanations for installation FOGT 40FMB JY992D98601 and operating procedures of the F9GT 40FMB User s Manual data transfer adapter Indispensable manual O Either manual is necessary O Refer if necessary please Refer to the Programming manual II or relevant hardware manuals for details concerning the applicable PLC 1 Introduction T
25. turns ON replace the battery PM 20BL as soon as possible The screen data is stored in the flash memory therefore data will remain even after severe battery voltage loss 6 1 1 Replacement Procedure 1 Turn off the power to the GOT and remove the battery holder cover 2 Remove the existing battery from the battery holder and disconnect 3 Within 30 seconds connect a new battery 4 Insert the new battery into the battery holder and attach the cover PM 20BL Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi opportunity loss or lost profits caused by faults in the Mitsubishi products damage secondary damage accident compensation caused by special factors unpredictable by Mitsubishi damages to products other than Mitsubishi products and to other duties For the detailed warranty refer to the GOT F900 Series HARDWARE MANUAL CONNECTION Manual number JY992D93901 Manual revision E Date Sep 2008 a MITSUBISHI ELECTRIC CORPORATION HEAD OFFICE TOKYO BUILDING 2 7 3 MARUNOUCHI CHIYODA KU TOKYO 100 8310 JAPAN HIMEJI WORKS 840 CHIYODA CHO HIMEJI JAPAN Changes for the Better a MITSUBISHI GRAPHIC OPERATION TERMINALS MELSEGGOT cor F900 This manual contains text diagrams and explanations which will guide the reader in the correct installation safe use and operation of the F940WGOT TWD E and should be read and underst
26. use Fuse built in GOT impossible to change Max Allowable Momentary 1 ms If less than 1 ms the GOT will continue operation If 1 ms or Power Supply Failure period more the GOT will shut down Built in PM 20BL type lithium battery Approximately 5 years life 2 3 Screen Hardware Specifications Specifications Display Device TFT colour liquid crystal 480 x 234 dot 60 characters x 14 lines Dot Pitch 0 324 mm 0 013 Horizontal x 0 375 mm 0 015 Vertical Actual character size ratio 1 1 16 Effective Display Size 155 5 mm 6 12 x 87 8 mm 3 46 7 inch type Number of Colours 256 colours Life of liquid crystal 2 ome q y Operating temperature 25 C 77 F Backlight Cold cathode tube ee oh Maximum 50 touch keys screen 30 x 12 matrix RS 422 Interface RS 232C RS 232C User screen 500 screens or less System screen Allocated screens No 1001 1030 Flash memory 1MB built in e Bright dots always lit and dark dots unlit may appear on a liquid crystal display panel It is impossible to completely avoid this symptom as the liquid crystal display comprises of a great number of display elements Flickers may be observed depending on the display color Please note that these dots appear due to its characteristic and are not caused by product defect e When the same screen is displayed for a long time an incidental color or partial discoloration is generated on the screen due to heat damage and it m
Download Pdf Manuals
Related Search
Related Contents
Samsung MM-N4 User Manual Bedienungsanleitung instruCtion manual manuel d`utilisation EFC™-721 HD Camera Hardware Installation Manual Integrated BLDC Servo Severin KM 3907 Copyright © All rights reserved.