in.k800™ - Dynasty Spas
Contents
1. Water temperature The temperature shown at the bottom of the screen gives the actual water temperature Use the Up and Down buttons to set the desired temperature The set point will appear in blue After 3 seconds without any change to the set temperature value the current water temperature will reappear Settings Settings Settings From the home page you can access the Settings where you will find e Water care Audio Date and Time Keypad Settings Flectrical Configuration About Use the arrow keys to move up and down in the list To select an option press the lit button beside it key 2 At any point you can press the Settings button to return to the home screen Water Care Water care The Water Care section will help you set up your ideal filtration and heating settings Choose a mode depending on your need Use key 2 to choose your setting A checkmark will appear on the selected icon to confirm In Energy Savings mode the set point will be reduced by 20 F which means that the heating system will not be engaged unless the temperature falls to 20 F below the spa s set temperature If your spa uses a circulation pump configured to run 24 hours the screen will show you the purge setting instead of filtration The purges are pre programmed for a fixed number of minutes therefore the duration will be set to N A on the screen and only the start time can be modified Default p2. ack value Date amp Time m AM PM Water care modes Away from home In this mode the spa will always be in economy the set point will be reduced by 20 F and filtration will be reduced Beginner The spa will never be in economy mode and will run a normal 8 hours of filtration a day Energy Savings The spa will be in economy mode during the peak hours of the day and resume normal mode on the weekend C i 43 Super Energy or The will always in economy mode during peak hours every day of the week PAAL Weekender The spa will be in economy mode from Monday to Friday and will run normally on the weekend Modifying schedules To modify a Water Care category use the lit button to the right key 5 to open the selected Water Care menu You can add schedules by scrolling down to Add and selecting with key 2 To delete a schedule press the lit button next to the garbage can icon on the top right of the screen You can modify the programmed schedules by selecting one and adjusting the schedule using the arrow keys Use key 2 to move between parameters You have several possibilities for the schedule Mon Fri weekend every day or single days The schedules will be repeated every week The time and duration are set in 30 minute increments Once you have set the schedule use key 1 to go back Ensure that you have selected the desired Water Care option in the main Water Care me
3. b Quick Reference Card Please consult your spa user manual for complete info on the features of your spa system Description Key 1 Key 4 Settings Key 2 Mode optional Key 3 Main functions Power Press any button to turn the keypad on After 30 minutes without activity it will shut off Main screen The main screen gives you access to your accessories and water temperature At the bottom of the screen you will see any error or maintenance messages that are present Selection lights Light Key 6 in k800 intuitive color keypad With its bright full color display the in k800 provides an intuitive user experience while its screen s high resolution brings hot tub user interfaces to a new level Loaded with a large amount of memory and a powerful on board processor we have created the seamless graphic interface that spa users have been waiting for Up Key5 Down Functions for keys 1 to 5 will depend on your system s low level configuration Start or stop accessories To start or stop an accessory press the associated button Icons will become animated when their accessory is turned on and inanimate when turned off Icons on the screen will reflect the speed or state of the devices running on your spa When an accessory has more than two states press the button until it reaches the desired state
4. l not work when AUX is selected as the source Selecting the source Press the Bluetooth key to select a device using Bluetooth wireless technology Press the Source key to use a device connected to the auxiliary cable If no source is selected the in stream system will use the last selected source Play Pause audio Press the Play Pause button to start or pause the audio Adjusting the volume Press the Volume Up or the Volume Down key to increase or decrease the volume Changing tracks Use the Last Track and Next Track keys to change tracks Disconnect or Unpair Bluetooth These options can be found under the Audio section in the Settings menu
5. nu Date and time Here you can adjust the time format and change the year date and time Use the arrows to choose the setting that you want to adjust and select it by pressing key 2 Use the arrow buttons to change the parameters and key 2 to move between parameters Key 1 will take you back to the main Settings menu Keypad settings In this section you can change the temperature unit and language Use the arrow keys and move to the setting that you would like to change Use key 2 to choose and then the arrow keys to modify Electrical Config EN About Keypad S W number Keypad S W revision Pack S W number Pack S w revision Selected pack config og About This section shows information about the in k800 software number and the revision numbers Electrical configuration Please do not make changes in this section unless you are a qualified electrician In this section you can change the low level configuration number of phases and input current Use the arrow keys to scroll between selections key 2 to choose and move between parameters Please refer to the TechBook for your specific spa pack for details about the low level settings Once you have reached Number of Phases in the menu you cannot use the arrow keys to go back up to Low level Configuration Please go back and re enter the Electrical Config menu Audio Audio The in k800 can be used with either the in tune
6. or in stream audio system The Audio section in the Settings menu gives you the option to disconnect or unpair your Bluetooth enabled device when using the in stream The Mode key audio access is only present functional when the spa is equipped with a Gecko audio component in stream or in tune The keypad will be set appropriately in the factory of the different components of your system in tune operation Press the Mode key to access your in tune Turning power on off Press the Power key to turn the in tune on or off Selecting the source Press the Source key to choose between CD Auxiliary input and Radio If no source is selected the in tune will use the last selected source Play Pause audio Press the Play Pause key to start or pause the audio Adjusting the volume Press the Volume Up or the Volume Down key to increase or decrease the volume Changing tracks Use the Last Track and Next Track keys to change tracks for the CD or AUX input When in Radio mode the Last Track and Next Track keys will move through preset radio stations on the selected band To change bands or preset stations see your in tune manual in stream in stream operation Press the Mode key to access your in stream If you are using a device with Bluetooth technology it must be connected for functions to work Please note that the Play Pause and Change Track functions apply to devices using Bluetooth technology only and wil
Download Pdf Manuals
Related Search