User Manual Melodyne
Contents
1. Sim SI SOD SIM sotommute Out Channel 63 G2 G22 CA CD G2 2 2 Output Mono Stereo G23 Ged Ged C3 C3 C3 C9 Eo chamets Panorama OOO OOO O rmm l Master Volume Volume 4 20 7 59 88 1 6 26 23 13 0 3 db Labels The mixer tracks have been numbered according to the track order and the track s name will appear when the mouse is located over the track number The values of the sliders and pan buttons are indicated Scaling The volume sliders are now db linear down to 25 db and amp linear from 25 to oo The level meters are db linear down to 25 db as well Other features All controls can be reset to zero position with Alt click on Mac Ctrl click on Windows The level meters have an improved dis play and show peak tracking now 19 celem n 6 New Detection Panel and Batch Detection Batch Detection As before on double clicking an undetected melody the detection panel will open But unlike before all soundfiles currently used will be visible in the detection panel and can all be detected together if desired Additionally there is detailed information about the soundfiles shown in the right part of the panel The files to be detected can be selected with the checkbox button If an already detected soundfile should be redetected with different parameters this can be done by dou ble clicking that button The detection parameters for the currently selected so2. applies to these tools Note Separation Tool Double click a note to separate it Select two or more notes and double click one of them to combine them To combine two notes you can also double click the separation line between them Segment Separation Tool Double click a note separation line to sepa rate segments Select the last and first notes of adjacent segments and double click one of the notes to combine the segments or double click a segment separation to combine segments Edit Pitch Tool With the pitch snap mode active double click a note to snap to the assigned pitch If you move the note it will snap to the respective pitch position anyway Mute Note Tool Double click a note to mute or to unmute it Edit Quantise Tool If a melody was assigned to a different melody as its quantise master double click the notes to make them snap to their new assignment Define Arrangement Tempo Tool Double click a note to set the closest beat to the note start Triple click the note to insert a new bar definition start additionally Correct Pitch Detection Tool Double click a note if you want it to redetect its pitch course at its current place or move it up or down a little bit If you just select it you get info about its pitch in the new info fields in the inspector bar for that tool N eM Scroll and Zoom With the Navigation Tool the first subtool of the Select Tool in any window you can grab the window s conte
3. keep their original decay with the slider in its rightmost position and will decay faster if the slider is moved to the left In the Time Based mode you have different parameters to control sound behaviour Kegs O Plain O Note Based Smooth Formant Corr Formant Style mE O processed Time Based C Crisp _ 8 m e Crisp Algorithm or Smooth Algorithm These are two different ways of internal sound processing The Crisp one is new formerly only the Smooth one existed For most cases the Crisp one will be better as it gives more presence and fidelity and addi tionally it is faster and thus lets you play back more tracks But there may be cases where the Smooth one sounds better This may be the case if you play a sound very slowly or stretch it very long or if there are very sudden changes or crackles in a sound that may be emphasized with the Crisp algorithm and softened with the Smooth algorithm In case of doubt just test it Switching beween these algorithms will never result in a big sound effect as long as the other parameters are not changed so you can just decide which one is better for your material By default the Crisp algorithm will be selected e Formant Correction 0 100 If notes are changed in pitch this parameter determines if the overall spectral content of the changed notes is adapted and kept in the original position Formant Correction of 100 or if the sp
4. User Manual Melodyne New Features in Version 1 5 Celemony Software GmbH 2002 Melodyne User Manual New Features in Version 1 5 Celemony Software GmbH Valleystr 25 D 81371 M nchen Germany www celemony com Support hotline 49 0 2642 9940 16 The manual and the software described therein are supplied under formal licence They may be used and copied only under the conditions of this licensing agree ment The data contained in the manual only serves for information purposes and may be changed without prior announcement The information contained in the manual does not constitute a legal obligation of Celemony Software GmbH Cele mony is not responsible for any eventual faulty or inaccurate information contai ned in the manual The manual and any parts thereof must not be reproduced or transmitted without the prior and explicit permission of Celemony Software GmbH All product and company names are registered trademarks or brands of the respec tive companies Apple the Apple logo Mac Macintosh and Power Macintosh are registered trademarks of Apple Computer Inc Windows 98 Windows ME Windows 2000 Windows XP and DirectX are either registered trademarks or trademarks of Microsoft Corporation Celemony Software GmbH 2001 2002 All rights reserved If you already know Melodyne and the Melodyne manual you won t have to work all through the new manual to see what has changed Here we have compiled the most im
5. aration will be performed for the whole melody immediately after setting the slider to a new value 15 E je J Silence Sensitivity Slider Determines the threshold below which seg ments are considered to be silence If the slider is set to its rightmost posi tion no silence at all will be defined and the silence after a note decay will alway be considered to belong to that note This parameter may also affect note separation The re separation will be performed for the whole melody immediately after setting the slider to a new value Define Score Time Tool Next to the signature denominator field there is a checkbox labeled 1 8 T if the denominator is 4 If it is set active the program assumes that each quarter beat is divided into triplets and will prefer triplet positions on automatic detection of the score note posi tion assignment On switching it on or off a new detection of score note positions will be performed If there are multiple bar starts defined you will find the All Triplets action in the Action Menu to switch triplets on or off for all defined bars at once Another new action in the Action Menu is labeled Set Tempo Zero to Sound Zero This will set the start of the tempo definition right to the start of the soundfile Also available on defining the arrangement s tempo in the Arrangement Window Define Beat Assignment Tool For better orientation the assigned note positions are now visualized no
6. detection Faster and more comfortable handling of moving notes note separations changes of tempo definition etc A bug was eliminated that prevented detection after about 6 min of recorded time in a soundfile 24 rele
7. e will be played as its original up to the mid dle of the note and will start stretching afterwards Equally stretching will be performed right from the start if the slider is set to the left and only the very last part of the note will be stretched if the slider is set to its rightmost position The Stretch Shape slider determines the transition between the unstretched and the stretched part With the rightmost posi tion of the slider there will be a sudden change in speed at the position determined by the first slider and the speed will be constant from that point on Moving the slider to the left will result in a more smooth transi tion in speed With the slider in its leftmost position there will be no stretching at all which results in silence from the note end to the next note start Generally just play around with the stretch sliders to achieve the result you like best In the second case where there is more sound material available than needed to the next note start the first two sliders don t affect the sound at all Instead you can determine with the Overlap slider if a note will stop sounding as soon as the next one starts or if and how long it will continue to sound into the next note The available duration in that case will still be dependent on how much faster or lower in pitch the recording is played The Decay slider works for both cases and simply applies a decay enve lope over each note The notes will
8. ectral content is trans posed together with the pitch Formant Correction of 0 A Formant Cor rection of 100 is the default If no notes are changed in pitch this parameter would not affect the sound in any way A Formant Correction of 0 gives the same effect as if you would always move the formant bars additionally by the amount you moved a note in pitch Nevertheless with a Formant Correction of 0 the formant bars will appear right over the note if they are unchanged and can still be altered relatively to that posi tion e Formant Style 0 100 This determines another aspect of formant behaviour for notes that are moved in pitch or changed in formant position Again if no notes are changed in pitch this parameter would not affect the sound in any way and it will be hardly audible in the case of small pitch changes The default setting is 100 as this gives better results in most cases On more extreme pitch shifting of notes the formant change will mostly be more lively but not as linear as with this parameter set to 0 Although a value of 100 will sound better in most cases you should be aware of a special unwanted property of that setting On transposition exactly one octave downward the recording will sound one octave higher i e just like the original and you may have to move the formant position a bit downward as well or change the Formant Style to a value different from 100 So to get the optimum resu
9. haracter is adapted to the new general position as usual This feature is optional and you can set it to your needs By default the Formant Follow value ist set to 0 in the Preferences leftmost position of the slider which means that this feature is disabled In its rightmost position the formant position would follow the pitch of the edited notes by 100 in the middle for example the formants would follow 6 semi tones down if the melody is moved down by one octave Edit Formant Shift Style Tool With the new sound synthesis algo rithms there are different ways the formant character will change when notes are moved in pitch With this tool you can adapt that formant shift character to your needs It is the same parameter as described with the Playback Algorithm Parameters but provided as a per note parameter here You won t use that tool often but sometimes it is good for fine tun ing a changed note s sound 12 nEle BJE E Move Notes and Stretch Notes Tools Now the behaviour of Reset with the Stretch Notes tool is different to that with the Move Notes tool Reset with the Move Notes tool active results in the original time course but stretched to the current length of the selection whereas a reset with the Stretch Notes tool active results in the original time course and dura tion if there is enough room after the selection to reset to their original length Quantise Notes T
10. ight e Plain Playback or Processed Playback This determines if the sound is processed at all in the Melodyne way or if it is simply played back If a melody is not detected this parameter will be Plain Playback by default and will switch to Processed Playback auto matically after detection If you want only a few notes to be processed and the rest of the recording to be played as original you can setup differ ent segments for that track as decribed in the next section If Plain Play back is selected there is still a little difference depending on the next parameter if that one is Original the sound will be played exactly as the original recording once a segment is started regardless of the tempo If it is Sampler the sound will be played with the pitch depending on the arrangement tempo just like faster or slower playback of a tape e Note Based or Time Based In the Note Based mode each note is treated as a separate entity and its attack is always kept as the original In the Time Based mode time is run ning continuously without special treatment of the single notes except that the continous time may run faster or slower near a note s start The Note Based mode is more suitable for percussive or plucked sounds with a clear attack and decay In this mode formants can not be corrected or influenced in any way The Time Based mode is more flexible in terms influencing the sound and formants especially and will work better for
11. ill be dis played for info in the inspector text fields In the previous version this was not possible because a single click caused the note to redetect its pitch course in place which is now done with a double click For pitch redetection there is a Detection Sensitivity parameter which can be set with the Detection Sensitivity Slider This parameter determines how far the pitch course is followed if it becomes very irregular This parameter has been set set to a lower value for pitched material or to a higher value for unpitched notes by default before detection but it can be set to any value that is appropriate to detect the present material Here pitch redetection is always performed for a single note and the sensitiviy can be set to a different value for each note if appropriate If a note is selected redetection will be performed for that note immediately after setting the sensitivity slider to a new value Note Separation Tool Double click a note to separate it select two or more notes and double click one of them to combine them To combine two notes you can also double click the separation line between them Separation Sensitivity Slider Determines if more or less segments will be detected as separate notes If separation mode is set to Separate By Pitch with the check box on the right pitch will be the main aspect of note sep aration Thus this parameter will have greater effect on percussive mate rial The re sep
12. itch Pitch Wide Align Tool A new subtool of the Edit Pitch Tool Similar to the current Pitch Align Tool you can align the pitch course of a note to the note center but without cancelling out vibrato and the fine structure of the pitch course Thus only the average pitch course will be aligned Pitch Transition Tool You can now make the transition steeper or slower also for notes that have not been moved against each other in pitch Furthermore the pitch transitions behave intuitively better when being edited with the mouse Sometimes the transition between notes changed in pitch will sound better if no portamento is applied Up to now this was only possible by cutting the melody between notes into separate segments Now there is a new per note parameter determining if a portamento is applied If the tool for changing pitch transitions is active the mode can be set for the currently selected note s with the Transition button in the inspector bar Together with the detection parameters it can be specified in advance if this portamento adaptation should be on or off by default for a given mel ody For example it is set to off by default for material that had been specified as unpitched percussive on detection But that can be changed at any time after detection with the Transition button as described Edit Formant Tool In the Preferences the option Formant Follow has been added which needs some explana
13. lgorithm at any time as described in the chap ter about selection of sound synthesis algorithm parameters 23 im je i 7 Other new features Notation Correct sharp or flat notation relative to chosen scale Triplets are notated as well Audio Export A clip detection was added If any signal clips while exporting melodyne asks the user if the mixer s volumes should be set to the appropriate value automatically Midi Export Now it can be selected if the notated quantised posi tions or the actual note positions should be exported Arrangement Window New pull down action Apply Arrangement Properties can be used in case that the definition of tempo can be done better with all tracks of the arrangement visible and audible and the tempo track and tone scale definitions should be assigned to all present single melody definitions afterwards Display In the Preferences panel you can now select the lightness of unselected notes Default Outputs In the Preferences panel an option was added to spec ify a pair for default outputs for new arrangements This is very useful if you use a soundcard with multiple outputs that is configured to use other outputs than 1 2 as default stereo outputs Progress Panel on Opening A progress panel was added that informs the user what is going on during opening an arrangement Improved Performance with Long Sound Files Faster opening of undetected Soundfiles due to optimized pre
14. lt you may want to experiment with this parameter Additionally there is the possibility to change this parame ter per note if desired as described below with the new Edit Window tools see Edit Formant Shift Style Tool p You can now use different play algorithm settings within one track If you want only a few notes to be processed and the rest of the recording to be played as original you can setup different segments for that track To do so choose the Segment Separation tool in the Editor Window and double click a note separation The melody is thus split into separate seg ments for which different play algorithms can be chosen It is not appro priate to insert a segment separation in a continuously sounding note as this separation may be audible If a melody is composed of a lot of copied and pasted notes there will be a lot of separate segments To assign a play algorithm to all of them you will have to select them by selection rectangle or with Select all 2 Improved General Handling and Navigation 7 Previously with some tools an action was executed immediately when clicking on a note for example splitting a note with the note separation tool or muting a note with the mute tool Thus it was impossible to select a note for listening copying etc with these tools This behaviour was changed so that you can select notes with any tool and the respective action is executed by a double click This
15. material where there are transitions between the notes After new detection of a melody the Note Based mode will be selected for material that has been classified as unpitched or percussive on detec tion and the Time Based mode as the default for pitched material Don t be confused the Note Based mode is most similar to the algorithm that was called Time in the previous version For the Note Based and Time Based modes there are different controls in the inspector bar This one is for the Note Based mode 1 Processed Time Based eal 3 Plain Note Based Stretch Pos Stretch Shape Decay Overlay Meeles e S In the Note Based mode there is a fundamental difference in the type of processing applied depending if the recording is either played slower respectively higher in pitch or played faster respectively lower in pitch In the first case there is less original sound duration available for each note than would be needed until the next note start Thus part of the note will have to be stretched to sound longer than it originally does 5 E je i In the second case there is more original sound duration available than needed to the next note start The first two sliders labeled Stretch Pos and Stretch Shape affect the first case only where notes have to be stretched The Stretch Pos slider determines at what point of each note stretching will start If the slider is set to center position the not
16. n undetected melody has been opened in a new arrangement the arrange ment thus having the tempo that was detected for the melody Only if an undetected melody has been added to an arrangement with a tempo that is supposed to be different from the melody s tempo Own Tempo should be chosen to perform an independent tempo detection Separation Sensitivity Determines if more or less segments will be detected as separate notes If separation mode is set to By Pitch see above pitch will be the main aspect of note separation Thus this param eter will have greater effect on percussive material when separation mode is set to By Attack Only The same parameter is available after detection in the Melody Definition Window to modify separation without having to redetect the whole melody see Note Separation Tool Amplitude Sensitivity Determines the threshold below which segments are considered to be silence If the slider is set to its rightmost position no silence at all will be defined and the silence after a note decay will alway be considered to belong to that note This parameter may also affect note separation The same parameter is available after detection in the Melody Definition Window to modify separation without having to redetect the whole melody see Note Separation Tool 22 Pitch Tracking Sensitivity Is set to a low value if the pitch information in melodic notes is quite clear to prevent the tracking of irrelevan
17. n the detection process but it nevertheless changes a property that belongs to a note s definition You will remember that when changing the tempo of a melody the region around the start of each note will be kept at its original speed It largely depends on the material how far this region around the start of each note should extend to give good results You may change the size of these regions in forward and backward direction by moving these handles You can change the overall tempo of the melody in the Temporary Play Offsets panel to hear how the notes behave when changing the size of the region around the note starts Of course you can still edit the time handles later in Edit Mode for spe cial purposes This just defines a general behaviour on tempo changes Save Melody Definition Previously a melody definition was only saved on closing the Melody Definition Window Now you can save the defini tion while working at any time with the usual Save command respec tively 98 Ctrl S In the Definition Window with Save the mdd file will be saved not an Arrangement as usual 18 E e Jj 5 New Mixer Features 00 Mixer Track Numbers _ 4 7 Level Meters AAAANANA N A O Effect Select P G Rev Effect Send e NEE EE Ea Effect Return Activate Recording momom GJ GGG recor Solo Mute Siw EM Sim Sim
18. nt and move it directly in horizontal and vertical direction You can switch that tool to act as a Zoom Tool either by double clicking or by pressing the Alt key Ctrl on Windows before or while moving As you drag the mouse you will zoom in or out in horizontal and or ver tical direction You can assign a keyboard shortcut for switching quickly between the current edit tool and the Navigation Tool Locators You can set the left locator by clicking in the locator region in the time ruler with the Alt key pressed and the right locator with the 98 key pressed on Mac on Windows left with Ctrl right with Alt Markers You can generate pairs of markers to jump to defined regions easily You will find that functionality under the menu item Navigation in the main menu Markers are generated from the current locator posi tions You can also assign various keyboard shortcuts for jumping to defined markers see Shortcuts in the Preferences Play Original You can play the original sound for comparison with your edited version with key o It has the same behaviour respecting selec tion start stop as with playback with the space bar 10 E JE 3 New Tools and Features in the Editor Window Edit Pitch Tool When the score notation is visible you can also grab the notes there to move them to new pitch positions This always implies them to snap to the respective note in p
19. ool When the Quantise Notes tool is active you will see the quantised target position of each note displayed as a note out line The quantised target position is defined by the beat position a note is assigned to which can be understood to be represented by its notation as its ideal position The assigned position can be edited either by grab bing the note and moving it horizontally in its usual representation in the editor or its score representation if visible The resolution of quanta posi tions the assignment can be moved to is determined by the quantise size pop up button in the inspector bar Now you can also specify triplet posi tions here Quantising is a continuous parameter now displayed betweed 0 and 100 with the Quantise Notes tool active The value is changed by selecting notes and dragging the mouse up or down with the mouse but ton pressed You will see the notes approach their quantised position When a note is quantised to 100 the actual note will move when the position of its beat assignment is edited while only its assignment repre sentation will move when the quantise value is 0 The reference for quantizing can be either the visible beats and bars background default or the time behaviour of another track present in the arrangement For that it is necessary that the definition of beat assign ment is valid for the master melody as well as for the target melody The master melody or Time Track a
20. p SoundZeug ExperienceTour clar3 aiff cS 01_PitchAndTempo BrassBand baryton aiff Parameter Set Pitched Melodic Detection Parameters Pitch Range C 0 B 16 Hz C8 4186 Hz O Separation By Pitch Tempo Arrangement Tempo O By Attack Only Own Tempo Separation Sensitivity less separations more separations Amplitude Sensitivity high threshold low threshold DEE straight sensitive Melody Properties Notation Tonal Portamento O Treat Notes Separately O Rythmic Track Portamento Play Algorithm O Note Based Time Based 21 ce m What the parameters do in detail Pitch Range The range in which the program tries to find note pitches fundamentals If you know the range of a melody for sure you can set the range as narrow as possible to avoid octave detection errors Separation By Pitch By Attack Only Melodic material should always be separated by pitch as well whereas in unpitched percussive material the pitch doesn t have much meaning and thus the note attacks would be the only criteria Also in the case of speech the syllables should only be separated by attack not by pitch Tempo Arrangement Tempo Own Tempo When Arrangement Tempo is chosen the melody detection will skip tempo detection and take the arrangement tempo This option will be set to Arrangement Tempo in nearly all cases as a tempo detection has alredy been performed if a
21. portant changes for Melodyne version 1 5 Improved sound quality due to new synthesis algorithms Improved general handling and navigation New tools and features in the Editor Window New tools and features in the Melody Definition Window New Mixer features New Detection Panel and Batch Detection ND BW NH Other new features Furthermore another basic chapter has been added on Note Posi tions and Quantising in Melodyne in the new manual on page 58 1 Improved Sound Quality due to New Synthesis Algorithms The new sound synthesis algorithms have these improvements e less or no phasing e less or no comb filter effect that resulted in unwanted tonalisation of breath noise for example e more presence more fidelity generally less loss of substance on pitch changes Ol yaz The selection of synthesis algorithm parameters was moved from the main menu to a tool with its own inspector bar Plain D Original so oh Original wl Jele J Processed Sampler You select the Play Algorithm Tool the second subtool of the Select Tool in any window and get the inspector bar for selecting the parame ters If you click on a note all notes that belong to the same segment on that track will be selected The displayed play algorithm parameters apply to the selected segment The parameters are represented by radio buttons and sliders They can be understood to be kind of hierarchic from left to r
22. s master can be selected via a pull down menu when the Quantise Tool is active If the master melody for a melody has been changed you will see the outlines representing the quantised position move to their new positions immediately but you will have to 13 C E je i mne IL select all notes that should adapt to that master and double click them to move to the new position Of course this will only happen in accordance to their individually set quantise value i e nothing will happen if their quantise value is 0 Segment Separation Tool Segments that have been separated with the Segment Separation Tool can now be combined again Of course you can only combine segments that fit together in time course of their origi nal recording Segment separation can be used to play back segments of a melody on a track with different algorithms as described with the play back algorithms i celem 4 New Tools and Features in the Melody Definition Window Play Algorithm Tool You can select the default play algorithm for a melody This play algorithm will be saved with the melody definition and will be used as default play algorithm when you use that melody in any arrangement If you selected a play algorithm only for temporary listening purposes during melody definition please make sure to select the desired default play algorithm again before saving the melody definition Correct Pitch Detection Tool If you select a note its pitch w
23. t only by the score notation but also by the note outlines in the main view You can change beat assignment by grabbing and moving a note either in the score notation or its outline rep resentation in the main view The grid that determines the positions the note assignment can be moved to is given by the quantise size pop up but ton Here triplet positions have been added as well Correct Beat Anchor Tool A new subtool has been added to the Define Beat Assignment Tool that is used to correct the anchor position of the attack of a note This was previously handled with the Define Beat Assignment Tool as well which was a bit confusing 16 oE e yi e et Define Pitch Assignment Tool and Correct Pitch Center Tool For the difference between these two tools a bit of explanation may be useful Right after detection there is just the pitch course in a region that has been defined to be a note Then Melodyne tries to detect where the pitch center of that pitch course may be that the listener would perceive as the pitch of the note This pitch center of course will not necessarily be identical to the pitch of one of the given note steps in a scale So ina third step Melodyne tries to assign the note s pitch center to a note step in the given tone scale These are the positions the notes would move to if they are quantised in pitch These positions are represented by the blue rectangles behind the notes and
24. t pitch in noisy parts of notes On the other hand will be set to a high value for more percussive sounds or sound with less dominant pitch informantion e g speech to prevent pitch tracking from stopping too early The same parameter is available after detection in the Melody Definition Window for single notes to correct pitch tracking manually if appropriate see Cor rect Pitch Detection Tool In the lower part of the panel there are some Melody Property parame ters that don t affect the melody detection itself but rather determine how the melody is treated generally afterwards on editing and playback Notation Tonal Rhythmic Determines if the notation of that melody is displayed as rhythm notation on a single line or as the usual notation for melodic material Portamento Treat Notes Separately Track Portamento On detection portamento will always be tracked of course But later on when you edit the melody by moving notes in pitch you may want the program to repro duce a consistent portamento between altered notes similar to the origi nal one or you may want it to treat each note separately Here this is just a default setting you can change that behaviour afterwards in the Editor Window for the whole melody or per note see Pitch Transition Tool Play Algorithm Note Based Time Based This is just a default setting that determines the play algorithm used right after detection Of course you can change the play a
25. tion It emerged that there are two completely different cases of what you would do with moving notes in pitch and with the corresponding formant adaptation in either case In the first case you may want to edit single notes in a melody while the mel 11 CE je DT y IL ody as a whole should stay on the same pitch level In this case you will expect the spectral content or formant character to be adapted to keep the sound character of the melody consistent In the other case you may want to move the whole melody to a different register say a fifth downward In this case you will nearly always adapt the formant position of the notes manually say move the formant bars down by about 3 semitones to make the sound character fit that new overall pitch position For this case a general format shift ratio is avail able that can be set in the Preferences It is only applied if all notes of a melody a selected when moving the pitch up or down Changing this parameter in the Preferences will not affect any melodies that have already been edited before it only applies the automatic formant follow ing when the action of moving all notes in pitch is executed by the user You will see that the format bars have moved to a new position when you switch to the Formant Tool after editing the notes in pitch If some single notes are altered in pitch after that action the formant bars will keep their relative position to the note s pitch and their formant c
26. undfile are optionally shown in the lower part of the panel if it appears extended You can also access the Soundfiles panel via the menu item Windows gt Soundfiles 0o Soundfiles solosopran aiff Name baryton aiff Format AIFF 16 bit mono Rate 44100 Hz solotrumpet aiff baryton aiff clarl aiff Path Users peter Desktop SoundZeug ExperienceTour 01_PitchAndTempo BrassBand baryton aiff clar2 aiff DIDIDE clar3 aiff Parameter Set Pitched Melodic w gt show parameters Detect More Detailed Access to Detection Parameters You can either set each detection parameter individually if desired or you can choose a set of parameters from the pulldown menu After choosing a parameter set the parameters can still be altered individually The most used choices will be Pitched Melodic and Unpitched Percussive After selecting a param eter set you could still set the Pitch range from C3 to G4 for example if 20 E e ne IL you know that the content of the melody to be detected is only in that range But in most cases you will just choose Pitched Melodic or Unpitched Percussive and leave everything else as it is without taking a look at the parameters O0 Soundfiles solosopran aiff E solotrumpet aiff E Name baryton aiff baryton aiff v Format AIFF 16 bit mono clarl aiff iS Rate 44100 Hz clar2 aiff iS Path Users peter Deskto
27. will always be located exactly on one of the key positions whereas the position of the note pitch itself may be located somewhere between two keys The Define Pitch Assignment Tool serves to assign an empirical note center to a key position where it is meant to be and where it would be pitch corrected to For that purpose you would move the blue rectangles to the intended key position On the other hand the initial attempt of the program to derive a pitch center from a pitch course that may be quite irregular may not have been satisfying This can only be corrected by listening and is done with the Correct Pitch Center Tool With this tool active the notes will be tempo rarily quantised to the pitch positions they are assigned to and now you can judge by listening if the detection of the pitch center is appropriate If not you grab the pitch course indicated by the red curve and move it up or down until it sounds right This in turn will correct the center of the pitch course Caution if you re separate the note or move the note s sepa ration line after that correction you will have to check a corrected pitch center again as Melodyne always tries to find the pitch center of a note each time its boundaries are changed Generally you will need to use the Correct Pitch Center Tool in very few cases 17 ce e Ta Wy Z Define Time Handle Tool This tool is not really related to a property that has been detected i
Download Pdf Manuals
Related Search