alarm shop
Contents
1. been exposed to rain or moisture does not operate normally or has been dropped English _1 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus CAUTION J RISK OF ELECTRIC SHOCK AY DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL EXPLANATION OF GRAPHICAL SYMBOLS alert the user to the presence of dangerous voltage within the product s enclosure that A The lightning flash with arrowhead symbol within an equilateral triangle is intended to may be of sufficient magnitude to constitute a risk of electric shock to persons presence of important operating and maintenance servicing instructions in the literature VA The exclamation point within an equilateral triangle is intended to alert the user to the accompanying the product Class I construction An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection Battery Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire2. of Optical Axis Horizontal 180 90 vertical 20 10 Bracket Type Default Wall mount bracket Optional Pole mount bracket Weight 454g 470g Dustproof Waterproof Rating IP 65 Appearance 160 Unit mm ae G E amp L 3 89 English _9 SAMSUNG TECHWIN P Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal P No Z6806119001A 00
3. or the like Disconnection Device Disconnect the main plug from the apparatus if it s defected And please call a repair man in your location English _2 When used outside of the U S it may be used HAR code with fittings of an approved agency is employed CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Please read the following recommend safety precautions carefully e Do not Place th e Do not install on a surface where it is exposed to direct sunlight near heating equipment or heavy cold e Do not place thi area e Do not attempt e Do not place a glass of water on the product e Don e Don e Don User s iS apparatus on an uneven surface s apparatus near to service this apparatus yourself ot install near any magnetic sources ot block any ventilation openings ot place heavy items on the product Manual is a guidance book how to use the products The meaning of th e using sign in the book is following e Reference in case of providing information for helping of product s usages e Notice If there s any possibility to occur any damages for the goods and human caused by not following the instruction X Please read this manual for the safety before using of goods and keep it in the safe plac
4. SESMAR SIA 001 01 0010 0030 0060 Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near eat sources such as radiators heat reaisters stoves or other apparatus including amplifiers that prod 9 Do notd a of the pol d or grounding ty than the roundit l as t lades and a third are provide ur safety provided plug does not fit into y et obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus PNOarhto nN 11 Only use attachments accessories specified by the manufacturer A 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with P the apparatus When a cart is used Use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lighting storms or when unused for long periods of time a 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has
5. dy water or sea water keeping splashing the infrared light is likely to be blocked by the muddy water or seawater Installation To mount on the wall 1 Loosen the screw to remove the cover of the sensor as shown 2 Insert the bracket wing on the side as shown f using more than 1 bracket max height 15 cm English _5 3 Hook the upper hole of the sensor first and fit the lower hole into the wall bracket in the arrow direction 4 Remove the slot shaped filling on the rubber hole of the sensor and pull out the cables through the hole Rubber Hole 5 When done adjust the optical axis and insert the cover To attach to the pole 1 Pull out the cables from the wiring hole of the pole insert the U shaped pole bracket to the pole Cable In Hole 2 Attach the sensor to the bracket and arrange the cables as necessary same as in wall mounting Pole bracket Optional English _6 3 Put the cover as original Adjusting the optical axis 1 Connect both transmitter and receiver and turn them on 2 Look through the mirror of the sight and adjust the sensor so that the other sensor can be positioned in the center of the mirror m You can use the left right adjustable screw and the vertical adjustable screw of the reflector to refine your adjustment vertically 10 amp horizontally 90 3 Check the level of the light received from the monitor output signal You can use the tester
6. e English _3 IR Sensor at a Glance Cover Receiver Transmitter Multipurpose Bracket Alarm LED Response Time Control Wheel Vertical Angle Adjustable Screw What s Included Mh 4 Le t E B Kaa P Jik EE T E m l y D Injection bracket x2 Injection Bracket Wing x4 Screw x4 DST P b Steel Bracket x2 optional User Manual Warranty Card U shaped Bracket x2 optional English _4 Adjusting the response speed You can adjust the response time by tuming the response time control wheel left or right Tuming it left will speed up the response time tum it right to slow down the time m The factory default is set to 250 msec e Full speed run 50 msec e Fast walk 100 msec e Normal walk 250 msec e Slow walk 350 msec e Jump over a fence or obstacle 500 msec Installation Instructions For best performance you should consider the followings when placing installing and keeping the product at a distance from the object e Do not expose it to a place where its light projector or light receiver is affected by a direct strong light such as sunlight or headlight below 2 is not allowed in the optical axis e Do not install it in an unstable not properly secured place wire fence or unsecured pole is not allowed e Do not install it in a place where the infrared light is blocked due to a seasonal reason such as thick wood or bushes e Keep it away from the mud
7. egulate the power voltage 3 There exists an obstacle between 3 Remove the obstacle transmitter and receiver 4 Ghange the wiring path 4 There exists a different strong power source 5 Secure the pole or support around the transmitter or receiver 6 Adjust the optical axis as necessary again 5y The transmitter or receiver gets loose and 7 Wipe out the impurities with a soft cloth unstable at its position 8 Set the response time longer ND The optical axis is dislocated The cover of the transmitter or receiver has impurities on it Sometimes a big bird or cat can block the light temporarily Wiring Diagram Transmitter Receiver 1 VCC DC12V 1 VCC DC12V 2 GND 3 Normal Close 4 Common 5 Normal Open 6 Tamper 7 Tamper English _8 2 GND Specifications amp Appearance Specifications Item Description Model SIA 00101 SIA 0010 SIA 0030 SIA 0060 Work Range Outdoor 10m Outdoor 10m Outdoor 30m Outdoor 60m Detection System NIR Blocking System Twin Beams IR Light IR LED Response Time 50 500 ms Power Voltage DC 12V 15 AGC Voltage Alarm 2 0V or less Ready 2 1 2 9V Good 3 0V or higher Current Consumption Receiver 19mA Transmitter 22mA max Alam Out Roel tampon time CfE rdar foro 1 S60 Temperature 25 C 60 C Temper Output Dry contact Micro SW COM N C Adjustment
8. to measure the DC voltage and refine your adjustment 4 Check the output voltage of the tester and close the cover Output Voltage Optical Axis Status 3 0V or higher Good 2 9V or lower To be adjusted English _7 Troubleshooting Problem Reason Action The power indicator of the 1 Power is not supplied 1 Apply the power transmitter does not turn 2 Loose connection or short circuited 2 Check if the cables are properly connected on Even if block the infrared 1 Power is not supplied 1 Tum on the sensor light the alarm indicator of 2 Loose connection or short circuited 2 Check if the cables are properly connected the receiver does not turn 3 The infrared light is incoming to the receiver 3 Remove the interruption object or change on after reflected by an object the installation site or the orientation of the 4 Two light sources are not properly blocked optical axis simultaneously 4 Block two light sources simultaneously The alarm indicator of the 1 The optical axis is dislocated 1 Adjust the optical axis as necessary receiver will not turn off 2 There exists an obstacle between 2 Remove the obstacle transmitter and receiver 8 Wipe out the impurities with a soft cloth 3 The cover of the transmitter or receiver has impurities on it The alarm sounds 1 Disconnected cables 1 Check the connection status again intermittently 2 Fluctuation of the power voltage 2 R
Download Pdf Manuals
Related Search