IC7 Indoor Cycle - Matrix Fitness Equipment
Contents
1. MANUFACTURED BY Indoorcycling Group GmbH Happurger Str 86 90482 Nuremberg Germany info indoorcycling com www indoorcycling com Phone 49 0 911 54 44 50 h an A CAUTION READ ALL PRECAUTIONS AND INSTRUCTIONS IN THIS MANUAL BEFORE YOU START USING THIS EQUIPMENT PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE IMPROPER ASSEMBLY USE OR MAINTENANCE CAN VOID THE WARRANTY TERMS ADDITIONAL LANGUAGES AVAILABLE FOR DOWNLOAD AT WWW INDOORCYCLING COM Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com TABLE OF CONTENTS IMPORTANT PRECAUTIONS P 3 GETTING STARTED P 4 HOW TO ASSEMBLE THE INDOOR CYCLE P 5 9 INSTALLATION AND DISPOSING OF BATTERIES P 10 11 HOW TO ADJUST THE INDOOR CYCLE P 12 14 HOW TO OPERATE THE INDOOR CYCLE P 15 PREVENTIVE MAINTENANCE P 16 19 MAINTENANCE ACTIVITY AND REQUIRED SCHEDULE P 20 21 SPARE PARTS P 22 34 WARRANTY P 35 TECHNICAL SPECIFICATIONS The Matrix IC7 indoor cycle is according to EN ISO 20957 1 amp 10 a Class S product for use in a controlled environment such as sports or fitness facilities under the supervision of a trainer WEIGHT OF BIKE 54 KG MAX USER WEIGHT 150 KG USER HEIGHT SUITABLE FOR USERS BETWEEN APPROX 155 AND 215 CM REQUIRED FOOT PRINT APPROX 132 X 52 CM MAX SADDLE amp HANDLEBAR HEIGHT APPROX 120 CM WARNING The performance data shown on the display exceeds the requirements ac2. TORQUE WRENCH 17MM 2 PEOPLE WARNING Avoid high fluctuations in temperature whilst transporting the bike from the store to the installation site If there are nevertheless large fluctuations in temperature please allow the bike to acclimatise to the surrounding temperature before proceeding with assembly WARNING Please ensure that bolts are tightened with significant force to minimize loosening during use If bolts are loosened after initial assembly we recommend using medium strength LOCTITE 243 when reassembling SET THE VERTICAL ADJUSTMENT OF THE HANDLEBAR MAKE SURE THAT THE CONNECTING BRIDGES OF STEM TO THE HIGHEST POSITION BEFORE BEGINNING THE HANDLEBARS ARE LOCATED UNDERNEATH THE WITH ASSEMBLY MOUNTING BRACKET FOR THE COMPUTER DO NOT REMOVE WARNING TAPE FROM THE SLIDERS PRIOR TO THE HANDLEBAR BEING ASSEMBLED Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com IN ORDER TO AVOID DAMAGING THE INTERIOR CABLING THE HANDLEBARS MUST NOT BE ADJUSTED HORIZONTALLY BEFORE THIS STEP ENSURE THAT BOLTS ARE TIGHTENED WITH SUFFICIENT FORCE 30 NM WHEN MOUNTING THE HANDLEBARS THE FASTENING COUNTER SUNK BOLTS ARE COATED WITH TUFLOK AT THE FACTORY TO PREVENT THEM FROM BECOMING LOOSE DURING USE IF BOLTS ARE LOOSENED AFTER INITIAL ASSEMBLY WE RECOMMEND USING HIGH STRENGTH LOCTITE 2701 WHEN REASSEMBLING AFTER ASSEMBLY REMOVE THE WARNING TAPE DO NOT MOVE HORI
3. END CAP SET SEATPOST 190 01 00011 01 BOWDEN CABLE SPARE PART KIT FOR VERTICAL SEATPOST ADJUSTMENT SPARE PARTS HANDLEBAR HANDLEBAR STEM 110 01 00009 01 HANDLEBAR WITH SOFT PVC COATING amp MOUNTING BOLTS 110 01 00012 01 UPPER HANDLEBAR SLIDER ASSEMBLY 180 01 00005 01 FLIP LEVER ASSEMBLY FOR HORIZONTAL HANDLEBAR ADJUSTMENT 170 01 00004 01 CONSOLE BRACKET ASSEMBLY CABLE COVER KIT FOR UPPER HORIZONTAL HANDLEBAR SLIDER 110 01 00003 01 LOWER HANDLEBAR STEM ASSEMBLY Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com SPARE PARTS 180 01 00017 01 HANDLEBAR GASDAMPER KIT 190 01 00010 01 BOWDEN CABLE SPARE PART KIT FOR VERTICAL HANDLEBAR ADJUSTMENT 190 01 00006 01 END CAP SET FOR HANDLEBAR BRAKE SYSTEM 130 01 00011 01 UPPER BRAKE ASSEMBLY 130 01 00014 01 BRAKE DIAL KIT 25 SPARE PARTS 190 01 00008 01 EMERGENCY BRAKE SPARE PART KIT 190 01 00009 01 LOWER EDDY CURRENT BRAKE SPARE PART KIT 190 01 00012 01 BOWDEN CABLE SPARE PART KIT FOR EMERGENCY BRAKE 190 01 00013 01 BOWDEN CABLE SPARE PART KIT FOR LOWER EDDY CURRENT BRAKE DRIVE GEAR 150 01 00022 01 CAM PULLEY 72 TEETH KIT 150 01 00023 01 CRANK PULLEY MOUNTING BOLTS Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com SPARE PARTS 150 01 00024 01
4. FLYWHEEL AXLE KIT 900 00 90008 20 CRANK MOUNTING BOLT M8X20X1 25P 190 01 00014 01 FLYWHEEL SPARE PART ASSEMBLY 150 03 00044 01 POLY V BELT APK 895 FOR SECONDARY DRIVE 150 03 00045 01 POLY V BELT 2PJ 330 FOR GENERATOR DRIVE 150 03 00059 01 TIMING BELT 784 8MHL 12 FOR PRIMARY DRIVE SPARE PARTS 150 01 00016 01 PRIMARY DRIVE IDLER PULLEY ASSEMBLY 150 01 00018 01 SECONDARY DRIVE IDLER PULLEY ASSEMBLY 150 03 00054 01 LEFT CRANK ARM RED 150 03 00053 01 RIGHT CRANK ARM RED ELECTRONICS 170 01 00004 01 CONSOLE BRACKET ASSEMBLY 150 01 00017 01 GENERATOR ASSEMBLY Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com SPARE PARTS 170 01 00009 01 POWER MODULE PCB ASSEMBLY 170 01 00005 01 GEAR MODULE PCB ASSEMBLY 170 01 00006 01 PHOTO INTERRUPTER PCB KIT 170 01 00007 01 GAMMA SENSOR PCB ASSEMBLY 170 01 00016 01 MAIN CABLE HARNESS SET WITH IDENTIFICATION STICKER 170 01 00015 01 USB CABLE SET SPARE PARTS 170 03 00012 01 LIPO RECHARGEABLE BATTERY 5000MAH 3 7V 320 00 00009 01 CONSOLE KIT SHROUD 160 01 00004 01 RIGHT SIDE MAIN SHROUD KIT 160 01 00006 01 LEFT SIDE MAIN SHROUD KIT 160 01 00007 01 TOP MAIN COVER KIT Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling c
5. The pedals will continue to move with the flywheel until the flywheel stops The movement can only be stopped by using the emergency brake or by reducing the pedaling frequency in a controlled manner Always ride with resistance load to ensure that your pedaling motion is controlled Do not adjust handlebar or saddle during workout Do not pedal backwards 12 If you feel pain or dizziness while exercising stop immediately It is recommended that you consult a doctor if the pain does not subside for an extended period of time 13 All data shown on the display especially the Watt values generated by the integrated power sensor serve merely as information and to help guide training Only exercise within your physical limitations WARNING If you have pre existing health problems or a disability itis recommended that you consult your physician in orderto find the training method which is best suited to you Incorrect or extensive training can result in serious health injuries The manufacturer expressly assumes no responsibility for health risks personal injury property damage or consequential damages sustained by or through the use of this device unless it is a case of consequential damage which can be traced back to faulty material and or manufacturing and which come under the responsibility of the manufacturer GETTING STARTED DEAR CUSTOMER We would like to thank you for your confidence and purchase With the M
6. DETAILED CLEANING OF THE ENTIRE BIKE WEEKLY CHECK EMERGENCY BRAKE FUNCTION BI WEEKLY CLEAN AND LUBRICATE SADDLE amp HANDLEBAR SLIDERS POSTS BI WEEKLY CHECK ALL CONNECTIONS AND FIXINGS MONTHLY VERTICALLY ADJUSTING THE HANDLEBARS AND SADDLE MONTHLY EXAMPLES OF MAINTENANCE PLAN CHARTS FOR IN HOUSE SERVICE TECHNICIANS WEEKLY MAINTENANCE CHECKLIST BIKE NO PRODUCTION CODE OBSERVANONS AcHOMTAKEN resur MAME DAT Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com 1 ACTIVITY AND REQUIRED SCHEDULE BI WEEKLY MAINTENANCE CHECKLIST MONTHLY MAINTENANCE CHECKLIST BIKE wo PRODUCTION CODE OBSERVANONS ACHOMTAKEN resur MAME DAT SPARE PARTS FRAME 100 01 00004 01 INLAY SLEEVE SET FOR HANDLEBAR TUBE 100 01 00006 01 INLAY SLEEVE SET FOR SEATPOST TUBE 100 01 00009 01 LEFT FLYWHEEL SUPPORT ARM KIT 100 01 00007 01 VERTICAL HANDLEBAR ADJUSTMENT ASSEMBLY VERTICAL SEATPOST ADJUSTMENT ASSEMBLY SEAT SEAT POST 120 01 00005 01 LOWER SEATPOST ASSEMBLY Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com SPARE PARTS 120 01 00006 01 UPPER SEATPOST SLIDER ASSEMBLY 120 01 00010 01 COMFORT SPORT SADDLE BLACK RED INCL SADDLE CLAMP SEATPOST GASDAMPER KIT 180 01 00021 01 FLIP LEVER ASSEMBLY FOR HORIZONTAL SEATPOST ADJUSTMENT 190 01 00007 01
7. instructions The maintenance and care procedures must be performed in the regularity set out to ensure maximum operating safety and lifespan Irregularly observed maintenance and care procedures will lead to increased wear to the product and will void the warranty If you have any further questions on this topic please contact our technical support Please only use the acid and solvent free maintenance and care agent e g Brunox recommended by us to prevent damage to components of the indoor cycle DAILY MAINTENANCE 1 Make sure that the indoor cycle is leveled and does not rock if necessary adjust as described on p 15 2 Cleaning The indoor cycle must be regularly cleaned after each use for reasons of hygiene Ensure that there are sufficient soft cloths or paper towels and maintenance and disinfection agent available First disinfect the saddle and handlebars with a suitable agent and then wipe all bodily residues off the entire indoor cycle WEEKLY MAINTENANCE 1 Cleaning Depending on how often the indoor cycle is used it must be extensively cleaned once a week To do this soray a maintenance spray onto a soft cloth and clean all plastic parts the entire flywheel exposed framework parts including stabilizers and the plastic casing Never spray the maintenance spray directly onto the flywheel as this could cause the drive belt to slip through belt slip Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group Gm
8. pedalling slowly until the pedal has reached the position as shown in the picture The vertical saddle sliders should be adjusted so that your knees are always slightly bent when this pedal position is reached without dropping your hip one side Rule of thumb When standing next to the bike the upper edge of the saddle should be a hand s width four fingers below your iliac crest Please avoid cycling with your knees fully extended or your hip tilted to one side Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com HOW TO ADJUST THE INDOOR CYCLE ADJUSTING THE SADDLE HORIZONTALLY Properly positioning the saddle horizontally is very important in order to avoid injury to the knees Sit on the saddle and move the pedals until the crank arms are in the horizontal position The knee of your forward facing leg should be positioned directly above the centre of the pedal If this does not correspond to your bike s setting please align the horizontal saddle adjustment to the front or rear in order to attain this seat position HORIZONTAL HORIZONTAL SADDLE ADJUSTMENT SS HANDLEBAR ADJUSTMENT OPEN 41444442 9044544474 OY _ CLOSED SS e 5 lt o CLOSED WARNING Ensure that all flip levers vertical and horizontal are closed before sitting on the bike and always step off the bike
9. position spray the handlebar posts with maintenance spray and rub down the entire exterior surfaces including the horizontal post with a soft cloth Clean sweat residues off the contact surfaces of the horizontal handlebar post B beforehand and if necessary apply a small amount of lithium silicone grease Also apply some lithium silicone grease as required to the clamp mechanism of the flip lever of the horizontal post C MONTHLY MAINTENANCE 1 Connecting elements During the course of regular maintenance and care procedures all bolts nuts etc on the indoor cycle must be checked for firm seating and function and parts showing wear or damage saddle pedal teeth pedals SPD system replaced Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com PREVENTIVE USER DEFINED MAINTENANCE 1 Vertically adjusting the handlebars and saddle To ensure the easy adjustment of the vertical handlebar and saddle posts it is recommended that you check the clamping mechanism and if necessary apply a small amount of lithium silicone grease to the vertical clamping mechanism of the handlebar posts 1 and saddle posts 2 3 MAINTENANCE GREASE MAINTENANCE ACTIVITY AND REQUIRED SCHEDULE ACTIVITY ROTATION DETAILS FEET LEVELLING DISINFECTION amp CLEANING OF THE BIKE DAILY SERVICING BRAKE PADS
10. when making adjustments to the handlebars and or saddle 13 HOW TO ADJUST THE INDOOR CYCLE HANDLEBAR POSITIONING Begin with the top of the handlebars at approximately the same height as the saddle dotted horizontal line A in the drawing below for inexperienced users set to the 0 marking see dotted vertical line B in the drawing below If your knees touch the handlebars or if you experience back discomfort when pedalling in the standing riding position for extended periods the handlebars should first be adjusted slightly higher Horizontally lt gt adjusting the handlebars 4 4 Q d i 7 Vertically Qr adjusting the handlebars e using the flip lever f lt O Cd 1 The next step is to adjust the horizontal position of the handlebars as precisely as possible to your height An ideal and protective seating position for inexperienced riders is achieved if your back assumes an inclination at an angle of 45 The handlebars offer a wide variety of hand positions and adjustment possibilities which provide the experienced rider with every possibility to find his her ideal seating and hand positioning It is recommended to change hand positions frequently during extended workouts in order to minimise one sided and monotonous exertions on your muscles ligaments and joints Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcy
11. NENTS CONSOLE CABLE HARNESS PCBS AND SENSORS GENERATOR LITHIUM POLYMER LIPO BATTERY SADDLE CONSTRUCTION EXCLUDED STITCHING AND SADDLE SURFACE THE FOLLOWING WEAR ITEMS ARE EXCLUDED FROM WARRANTY Pedal straps pedal binding system saddle surface 35 CAUTION READ ALL PRECAUTIONS AND INSTRUCTIONS IN THIS MANUAL BEFORE YOU BEGIN USING THIS EQUIPMENT PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE IMPROPER ASSEMBLY SET UP USE OR MAINTENANCE MAY VOID THE WARRANTY INDOORW CYCLING GROUP EMAIL INFO INDOORCYCLING COM WEBSITE WWW INDOORCYCLING COM 2014 Indoorcycling Group Manufactured by Indoorcycling Group GmbH Happurger Str 86 90482 Nuremberg Germany
12. ZONTAL SLIDER BACKWARDS HAND TIGHT 2 PEOPLE le OPEN THE FLIP LEVER FOR THE HORIZONTAL ADJUSTMENT AND SLIDE THE HANDLEBARS TO ITS MOST FORWARD POSITION ASSEMBLE THE BOTTOM END CAP CHECK THE HORIZONTAL ADJUSTMENT OF THE HANDLEBARS WITH THE FLIP LEVER OPENED FOR EASE OF MOTION WHEN ADJUSTING CHECK THE CLAMPING FORCE OF THE HORIZONTAL ADJUSTMENT WITH THE FLIP LEVER CLOSED MAKE SURE THE HORIZONTAL ADJUSTMENT PERFORMS SUFFICIENTLY Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com HOW TO EMBLE THE CYCLE 1 b 15 MM PEDAL WRENCH HAND TIGHT INSERT THE BIKE COMPUTER INTO THE COMPUTER BRACKET THE UNDERSIDE OF THE HANDLEBARS WITH THE BOLT AND PLASTIC SLEEVE PROVIDED WARNING The user manual for the IC7 Coach By Color computer is enclosed separately and contains all the necessary information for setting up and operating the computer WARNING Attach the pedal marked R on the right crank and tighten by turning clockwise standard right hand thread Attach the pedal marked L on the left crank and tighten by turning counter clockwise left hand thread Please make sure that both pedals are fastened with sufficient force 55 NM to ensure that the bolt does not become loose during use The threads are provided with TufLok at the factory to prevent them
13. abelled with this symbol may not be disposed of along with normal household refuse For proper disposal please find out about the applicable laws or guidelines on disposing of electrical devices and batteries in your local area and adhere to them 11 HOW TO ADJUST THE INDOOR CYCLE The Matrix indoor cycle can be very easily adjusted depending on the requirements of various user groups This enables maximum riding comfort to be ensured whilst achieving optimal training results The configurations described in the following paragraphs demonstrate just a few of the most often used adjustment variations of which the indoor cycle is capable It is up to the user to adjust the indoor cycle to a riding position best suited to their requirements ADJUSTING THE SEAT HEIGHT Sit on the saddle and ensure that your hip is not tilted to one side when the pedal has assumed the position as shown in the picture Place your shoes in the toe clips cages on the pedals or in the SPD cleats if you are using cycling shoes if your indoor cycle is not fitted with a combi pedal system VERTICAL SADDLE ADJUSTMENT VERTICAL HANDLEBAR ADJUSTMENT CLOSED CLOSED WARNING Do not adjust seat and handlebar during exercise Ensure that all flip levers vertical and horizontal are closed before you sit on the bike and always step off the bike when making adjustments to the handlebars and or saddle Start
14. atrix indoor cycle you have chosen a high quality product which is designed according to the latest technical developments and thus fulfils the highest standards in quality and reliability This high level of reliability can however only be ensured with regular care and maintenance Adhering to the maintenance procedures outlined in this manual will ensure a maximised stability and prolonged lifespan in return for minimal maintenance effort This will guarantee long standing interruption free operation Instructions on operation and managing training for the Coach by Color computer can be found in the computer user manual also included with delivery SADDLE NG FLIP LEVER FOR gt HORIZONTAL SADDLE ADJUSTMENT oxi RESISTANCE KNOB EMERGENCY BRAKE FLIP LEVER FOR HORIZONTAL FLIP LEVER FOR VERTICAL SADDLE ADJUSTMENT N lt HANDLEBAR p sN FLYWHEEL 7 b FLIP LEVER FOR VERTICAL HANDLEBAR ADJUSTMENT SHROUD S lt PD e TRANSPORT WHEELS COMBI SPD PEDAL ES LEVELING FEET WARNING You will find the production code for the Matrix IC7 indoor cycle on the tag plate which is located on the lower left side of the frame tube of the Indoor Bike Please enter this production code into care and maintenance lists Itis a strict requirement to provide the production code in all warranty claims Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com
15. bH 2014 www indoorcycling com PREVENTIVE MAINTENANCE BI WEEKLY MAINTENANCE 1 Emergency brake To ensure operating safety the emergency brake must be regularly checked to make sure it is functioning properly To do this press down the red emergency brake handle whilst pedalling When functioning optimally it should produce an immediate braking effect and bring the flywheel to a complete standstill The flywheel is only released again by the emergency braking function after coming to a complete standstill and when the pressure is removed from the pedals 2 Saddle adjustments To maintain the easy adjustment the vertical and horizontal saddle posts must be regularly cleaned and lubricated To do this position the vertical saddle post A in the uppermost position spray with maintenance spray and rub down the entire exterior surfaces including the horizontal post with a soft cloth Clean sweat residues off the contact surfaces B of the horizontal saddle post beforehand and if necessary apply a small amount of lithium silicone grease Also apply some lithium silicone grease as required to the clamp mechanism of the clamping lever of the horizontal post C PREVENTIVE MAINTENANCE 3 Handlebars To maintain the easy adjustment of the handlebar posts the vertical and horizontal handlebar posts must be regularly cleaned and lubricated To do this position the handlebars A in the uppermost
16. cling Group GmbH 2014 www indoorcycling com HOW TO OPERATE THE INDOOR CYCLE RESISTANCE ADJUSTMENT The resistance adjustment can be set precisely and regulated in fine increments according to the requirements of the cyclist using the resistance adjustment knob with a range of motion of 300 The resistance in where 0 is no resistance and 100 is maximum resistance is also displayed on the indoor cycle computer display To increase the resistance turn the resistance adjustment knob clockwise To decrease the resistance turn it counter clockwise For a magnetic brake system like the one fitted to this indoor cycle the magnetic resistive effect also increases with pedalling frequency Never pedal backwards under resistance as this can loosen the screws between the pedals and the crank arm and the two may even become detached To stop the flywheel during use the resistance knob emergency brake knob must be pressed down During training please make sure your shoes are placed in the toe clips cages provided or if you are using cycling shoes that they are connected with the SPD cleats The indoor cycle does not have a free moving flywheel The flywheel is firmly connected to the pedals and does not stop independently if the user stops pedalling Please always check your movements and reduce speed in a controlled manner to stop or simply press the red resistance emergency brake knob down to quickly slow down the movement and in s
17. cording to DIN EN 957 5 for Class A ergometers The average achieved accuracy of lt 1 relates to a rotational speed range of 40 120 RPM and a braking efficiency of between 50 900 watts Electronic components adhere to the EMV Directive 204 108 EC EMV Directive 99 519 EC and DIN EN 60335 1 for electrical safety Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com IMPORTANT PRECAUTIONS WARNING To reduce the risk of serious injury due to improper use of the equipment carefully read and adhere to the following important precautions and information before operating the indoor cycle 1 It is the responsibility of the owner to ensure that all users are informed of all warnings and precautions for proper use and are only authorized to use the bike independently after being successfully briefed by a qualified trainer or instructor 2 Do not operate the bike until it has been properly assembled and inspected as described in this manual 3 Keep the indoor cycle indoors away from moisture and dust Do not place the indoor cycle outdoors in a garage or covered patio or near water or pools Operating temperature of the indoor cycle has to be between 15 C 40 C Celsius 59 104 F at max humidity of 65 4 Always place the bike on a stable level surface If the bike is to be placed on a hardwood floor or carpet it is recommended to place a floor mat beneath the b
18. e If the bolts become lose we recommend applying medium strength LOCTITE 243 and then reattaching the crank fixing bolts with a tightening torque of 60 NM 4 Wipe down bike frame with a rag moistened with solvent free spray lubricant 5 Some parts of the bike may become loose during shipment Check crank arms and all exposed screws bolts and nuts and make sure that they are all secure and properly tightened Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com INSTALLATION AND DISPOSING OF BATTERIES CUSTOMER SERVICE 1 Provide the customer with basic maintenance instructions and direct them to detailed maintenance instructions 2 Have the sign off sheet for the manual explanation of maintenance procedures and verification of impeccable condition of the bikes confirmed by the customer when handing over the goods A copy of this confirmation counter signed by yourself is withheld by the customer 3 Repairs must only be carried out by manufacturer authorised service technicians BATTERIES MAY NOT come into contact with fire come into contact with coins or other metallic objects If the device remains unused for an extended period of time remove the battery in order to avoid damage due to leakage or corrosion If the battery leaks remove all residues immediately and insert a new battery If you make contact with any residues carefully remove them Products or batteries l
19. from becoming loose during use If bolts are loosened after initial assembly we recommend using medium strength LOCTITE 243 when reassembling OBSERVE ASSEMBLY INSTRUCTIONS INSTALLATION AND DISPOSING OF BATTERIES Instructions stated in this manual must be performed during initial installation of the Matrix indoor cycle in order to ensure optimal performance and a long lifespan Please read and follow the following instructions carefully If the indoor cycles are not installed and configured as described the components may be subjected to excessive wear and tear and the bike may become damaged If you have any questions regarding installation please contact service indoorcycling com Please note Lubricants are required for some maintenance procedures Please only use an acid and solvent free spray lubricant e g Brunox and white lithium grease 1 Make sure the bike is level If bike rocks on the floor turn the levelling feet underneath the front and or rear stabilizer until the rocking motion is eliminated Make sure that the levelling feet are not screwed out further than 10 mm 2 Verify emergency brake function to make sure that it is working properly 3 Check that both crank arm Allen bolts with which the cranks on the right and left side of the bottom bracket are fastened are secure tightening torque 60 NM These bolts are provided with TufLok at the factory to prevent them from becoming loose during us
20. ginal assembly at its production facility Parts repaired or replaced under the terms of this warranty will be warranted for the remainder of the original warranty period only ICG is obligated to uphold its manufacturer warranty obligation so long as the product is used in the closed environment it was designed for temperature range between 15 C 40 C Celsius 59 F 104 F and max 65 humidity not near a swimming pool or outdoors Defects caused by obvious deliberate mechanical impact inappropriate use or undo handling of the product may cause the manufacturer s warranty to become void In order for the manufacturer to uphold the warranty coverage the customer fitness facility is obligated to maintain and service the product as per the manufacturer s specifications stated in the owner manual of each product 5 YEARS WARRANTY FRAME CONSTRUCTION AND WELDING 3 YEARS WARRANTY POWDER COATING PAINT CRACKS CORROSION HANDLEBAR AND SEAT POST ASSEMBLY ALUMINUM PARTS AND PVC COATING DUAL BELT DRIVE SYSTEM POWER SENSOR BOTTOM BRACKET ASSEMBLY FLYWHEEL AND HUB ASSEMBLY CRANKS PEDALS EXCLUDED BINDING SYSTEM AND STRAPS INSERT SLEEVES FOR HANDLE BAR AND SEAT POST BOWDEN CABLES BRAKE ADJUSTMENT EBRAKE ACTIVATION GAS DAMPER ACTIVATION CABLE SP amp HB VERTICAL ADJUSTMENT BRAKE SYSTEM GAS DAMPERS FLIP LEVER ASSEMBLY FOR HORIZONTAL AND VERTICAL ADJUSTMENT HB amp SP LEVELLING FEET SHROUD AND TOP COVERS 1 YEAR WARRANTY ELECTRONIC COMPO
21. ike to protect the floor from becoming damaged 5 The level of safety of the indoor cycle can only be guaranteed if it is regularly checked for possible damage as well as wear and tear e g fixing points E Brake Pedals toe straps etc Consult an authorized service provider or the manufacturer direct to ensure the regular inspections are properly carried out 6 Carry out all maintenance care and service procedures as described in this manual on a regular basis Defective parts must be replaced immediately and the device must not be used until the repairs have been carried out Only use original parts from the manufacturer Repairs must only be carried out by from manufacturer authorized service technicians 7 Unsupervised children should be kept away from the training device at all times 8 Children under the age of 14 shall only be allowed to use the indoor cycle with parental approval and supervision of a qualified Trainer or Instructor Use of the bike by persons over the age of 14 only after they are briefed by a qualified trainer or instructor 9 The indoor cycle must not be used by persons exceeding weight of 330 Ibs 150 kg 10 Always wear appropriate tight fitting cycling or athletic attire and sturdy shoes preferably cycling shoes while operating the bike Unfastened shoelaces may become caught in the drive system and lead to injury 11 The indoor cycle does not have an independently moving flywheel
22. o doing bring the flywheel to a stop and suspend the training session Emergency brake press down red resistance emergency knob If the emergency brake has been activated it can only be disengaged again when the flywheel has come to a complete standstill and the pressure has been removed from the pedals RESISTANCE KNOB TURN RESISTANCE ADJUSTMENT KNOB EMERGENCY BRAKE PRESS RESISTANCE ADJUSTMENT KNOB N For safety reasons please always make sure you pedal in a controlled manner and adjust your pedalling frequency to your own cycling capabilities MOVING THE INDOOR CYCLE It is recommended that 2 people move the indoor cycle In order to prevent accidents and damage to the plug in sockets of the handlebars it is necessary to firmly fix the vertical handlebar adjustment before the wheel is tilted Please take extra care when moving the indoor cycle over uneven surfaces A second person is advisable here to prevent the cycle from tilting to one side Allow a minimum safety distance away from the nearest equipment of at least 50 cm to the left and right and 90 cm to the front and rear Check the stability of the indoor cycle where it is to be operated and if necessary adjust the levelling feet underneath the front or rear stabilizers to ensure the desired stability IMPORTANT Please do not unscrew the levelling feet more than 1 cm PREVENTIVE MAINTENANCE WARNING Please carefully observe the following
23. om 160 01 00008 01 HANDLEBAR TOP COVER KIT 160 01 00009 01 SEATPOST TOP COVER KIT 160 01 00014 01 GAS DAMPER BRACKET COVER KIT 160 09 00006 01 IC7 LEFT MAIN COVER ALUMINUM BADGE 160 09 00007 01 IC7 RIGHT MAIN COVER ALUMINUM BADGE SPARE PARTS SPARE PARTS 160 01 00011 01 MATRIX LOGO PLATE INSERT KIT RIGHT 160 01 00010 01 M A MATRIX LOGO PLATE rewa RIX QN INSERT KIT LEFT 0 FRONT AND REAR STABILIZER 140 01 00004 01 FRONT STABILIZER PROTECTION PLATE KIT LEFT 140 01 00005 01 FRONT STABILIZER PROTECTION PLATE KIT RIGHT 140 01 00003 01 TRANSPORTATION WHEEL KIT 140 03 00001 01 STABILIZER END CAP Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com SPARE PARTS 900 10 00003 01 LEVELING FEET RUBBER 75 SHORE 190 01 00004 01 STABILIZER MOUNTING KIT 140 02 00006 01 FRONT STABILIZER TUBE 140 01 00006 01 REAR STABILIZER STRETCH PLATE KIT 140 02 00002 01 REAR STABILIZER TUBE 33 SPARE PARTS PEDALS 150 01 00005 01 COMBI PEDAL SET SPD COMPATIBLE 150 03 00048 01 TOE STRAP SET Version 1 0 2014 IC MXIC7B 01 Copyright by Indoorcycling Group GmbH 2014 www indoorcycling com WARRANTY ICG warrants that all new equipment will be free of manufacturing defects in workmanship and materials effective on the date of ori
Download Pdf Manuals
Related Search