user manual
Contents
1. a a General 0 amp esnie Strona 2 z 16 rev 1 0 1 www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR Introduction Thank you for choosing KiVOS wireless peephole video door phone Please read this Manual carefully to fully understand its usage perfect functions and simple operation The Company reserves the right to modify this Manual from time to time without prior notice Before using this product please read these Attentions carefully to ensure safe and proper operation of this product Safety Warning amp Attention 1 Attention Do not place this product on an uneven or unstable table board to prevent failure or damage caused by falling Only the battery and charger designated by the Company can be used on this product Application of other products may lead to leakage overheating blowout and fire of the battery Do not violently strike shake or toss the wireless video door phone to prevent failure and fire caused to the wireless video door phone Do not put battery charger or wireless video door phone in the microwave over or high pressure device otherwise damage and fire of electrical circuit and other accidents may be caused Do not use this product in a place with flammable and2. No signal for Indoor monitor Distance between outdoor unit and Indoor monitor is too far Adjust to appropriate distance Disturbed by magnetic field around Keep handset far away from magnetic field Producer KIVOS HK INDUSTRY LIMITED Hong Kong E www kivos com c Tiwos K VO 5 Importer Poland Przedsi biorstwo Handlowo Ustugowe FENIKS ul Stoneczna 110 Nowa Ku nica 42 350 Kozieg owy www elmic pl elmic elmic pl E IL IMI Strona 16 z 16 rev 1 0 1 USER MANUAL KIVOS KD700mk2 www elmic pl elmic elmic pl MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR
3. USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR 2 Indoor Monitor Starting Up Plug in 9VDC power long press OK key about 3 seconds to start up about 1 second after shutdown logo shall be displayed on screen with a sound of Beep Turn into standby mode Display standby picture signal sign power sign time amp date Red LED flashes every 4 seconds In this mode the screen shall be dimmed after some seconds and turns into power saving mode If there is any calling record under this mode red LED flashes every 1 second and stops flashing after checking In standby mode long press Switch key about 3 seconds Goodbye shall be displayed on screen with a sound of Beep the unit switches off 3 Outdoor unit CALL handset In standby time mode press Door bell key to call the green LED of the outdoor unit lights up with a sound of Du Du Red LED of indoor monitor lights up the screen shows image and the unit rings for Max 30 seconds If there is no reply signal from indoor monitor the outdoor unit stops the Call and recall is allowed Intercom press OK on indoor monitor ring stop and the unit turns into intercom mode red LED of indoor monitor is off as well as green LED is on intercom time is Max 90seconds i Monitor press gt n monitor key on indoor monitor red LED lights up monitor outdoor voice wi
4. e Charge and record supported without the need to worry that the operation will be affected due to depletion of electrical quantity Auto circulating memory 100 photos auto circulating stored without the need to worry that real time recording is unachievable due to insufficient space of storage card e USB data charging wire charge downloading or uploading audio visual materials be realized through the USB interface Multifunction holder wall hung type or table type provided Multimachine extended function support two outdoor units and three handsets at most Long distance transmission communication distance can reach 150 meters in open space Frequency range adopt 2 4G ISM digital public frequency range 2402 2483 5MHz Adaptive frequency hopping technique adopt AFH Adaptive Frequency Hopping Technique produce communication frequency and Auto Sync frequency randomly Strona 4z 16 rev 1 0 1 1 www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR 2 Performance parameters Serial no Specifications Technical parameters Power Specific lithium battery BP 6M 1100mAh Consumption 400mA Outline dimension 134 74 31mm Weight 138 g Environmental conditio Temperature 10 C 50 C Waterproof grade IP55 Placement Hang on outwall Outdoor unit Surface material ABS
5. USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR Battery and Charge Be sure the activity of the battery please fully charged the new battery When the outdoor unit is at low power the lamp of launcher would flash It remains you to charge The battery of outdoor launcher can be changed or charged by USB The red light keeps bright When the Indoor monitor is at low power lt a bar the red indicator lamp will flash every second please charge immediately The Indoor monitor can be charged by the table type holder or by USB green light keeps bright Charge and work supported When the battery is charged fully it auto stops charging Battery type high quality lithium battery please use the BP 6M model battery if it needs replacement Charging and battery attentions please reference the chapter Warms and attentions in this manual Notice Under the low power display photo taking functions can t work normally Configuration Manual 1 Outdoor unit 1 Indoor monitor 1 piece Waterproof case 1 Wall hung holder 1 Charger DC9V 2piece DC data Line 1 piece Lithium battery BP 6M 2 pieces Screw M3 2 pieces Screws for waterproof case 8 pairs Statement This product maximum supports 2 outdoor units to 3 Indoor monitor The door phone has finished code match and can be used directly The standard configuration for KiVOS door phone is one i
6. amp hardware accessories Camera 300 000 pixels View angle 120 wide angle Night vision pat tern 2 Infrared lamps Working time 3 hours continuously Standby time 300hours Charge time 3hours External Power 9 16VDC AC Power DC 9V Consumption 400mA Outline dimension 126 84 20 mm Weight 387g Environmental condition Temperature 0 C 40 C Placement Wall hung type or table style LCD size 7 0 TFT color screen Indoor monitor Display resolution 640 480 oo communication 2 4GHz Images spread 25fps Video format AVI Picture format JPEG External power DC9V 2A Application distance About 150m in open space About 60m inside Strona 5z 16 rev 1 0 1 1 www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR Product Diagram Outdoor Unit Camera Infrared Connector a Reset SPK Battery cover LED CALL MIC Indoor unit with monitor MIC Brightnes 7 inch screen Colour LCD Volume USB tatusLED 9VDC power ON OFF Speaker EXIT Photo View MENU Video Down Unlock Up Right Strona 6 z 16 rev 1 0 1 www elmic pl elmic elmic pl MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR USER MANUAL KIVOS KD700mk2 Key introduction A Indoor monitor keys Spcs Key OK key work as option key for ME
7. explosive gas otherwise amount of dust otherwise product failure may be caused Do not place this product in a place with high temperature high humidity or large amount of dust otherwise product failure may be caused 2 Attention for operation of this product Do not apply force on LCD screen or knock other objects with it otherwise breakage and damage of LCD panel and seepage of crystalline liquid will be caused If the crystalline liquid enters your eyes there will be danger of ablepsia Wash your eyes be sure not rub your eyes and go to see the doctor immediately Do not dismantle or remodel this product otherwise damage creepage and electrical fault may be caused to this product Do not press the keys with a pin stump of pen pencil and other keen edged objects otherwise damage or mis operation will be caused Place tiny metal objects such as drawing pin at a place far away from the speaker As the speaker has magnetic property while working it will attract these tiny metal objects which may lead to personal injuries or damage of the speaker Do not project the lens at strong light source such as the sun and so on otherwise damage of the image sensor may be caused Do not press the terminal of lens with much force otherwise personal injury or damage of the device may be caused 3 Attentions for operation of charger You may charge the device with a charger or through a USB data line connected to the computer Ch
8. holder 5 o tag coors teres 8 Table holder 1 5 co 9 Battery Installation outdoor unit Installation of Storage Card Storage Card Introduction Functions and 5 1 Outdoor Unit Starting Up 2 Indoor Monitor Starting Up 3 Outdoor unit CALL handset 4 Indoor Monitor CALL Outdoor Unit Monitoring 5 Indoor Monitor CALL Indoor Monitor Intercom 6 sano 7 Bright Colour 8 UN CIRM 9 OSB 7 A 10 Indoor Monitor NOUS ves Battery Charge coveted aar EERE EE AEEA Eaa ARER FESE EEE eola PIGUET ON SEQUCINIO INE
9. press OK key enter into the receive code mode e f code receiving finished in 16 seconds exit code receiving mode after three beep sounds and then enter into code menu The added outdoor unit finished clear code under the standby mode keep pressing call key for 6 seconds until two beep sounds beep once about 3 seconds loosen the key to enter into code receiving mode e Outdoor unit make three beep sounds if receive code successfully and as No 2 outdoor unit Strona 13 2 16 rev 1 0 1 gt www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR If failed to receive code in 16 seconds exit receive code mode after one beep sound Enter into the Code Menu Outdoor unit enters into the standby mode After code receiving finished press OK key on code give unit to exit the code give mode enter into the code menu Press EXIT key to return to MENU gradually then enter into standby mode After all units receive code finished please use the No 2 outdoor unit call all indoor monitors if all code matched receive code successfully if not clear code of the new unit don t clear the code giving unit reform the code giving and code receiving again Notice 1 Please don t set same ID number for every indoor monitors and outdoor units 2 The original Password for code match menu is 0000 3 Info
10. 1 0 1 www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR 5 Indoor Monitor CALL Indoor Monitor Intercom Only can realize when there are 2 and more indoor monitors In standby mode if there are only two indoor monitors in system press OK to call another indoor monitor In standby mode if there are three indoor monitors in system press 48 to call small code indoor monitor press 4 to call large code indoor monitor e Ifthe CALLED indoor monitor doesn t receive the signal in 4 seconds the CALL monitor shows User not online it turns back to standby mode with a sound of Beep e ifthe CALLED indoor monitor receives the signal two monitors play music green LED lights up e Ifthe CALLED indoor monitor doesn t reply the monitors turn into standby mode after 30seconds e the CALLED indoor monitor replies by pressing Ok music stops red LED shuts down green LED lights up to both of the monitors and both monitors turn into intercom mode communication time is max 90seconds CALL indoor monitor has initiative hang up function e During communication if any end in the communication presses then both two ends hang up with a sound of Beep and turn to standby mode 6 Night vision With night vision function even under the environment of extremely poor visibility the outdoor unit can ac
11. NU as ON OFF as talking 2 UP key work as option key for MENU as video key when calling or monitoring as option key when calling extension monitor 3 DOWN Photo key work as option key for MENU as photo key when calling or monitoring as entrance key for exposure adjust as option key when calling extension monitor EXIT E monitor key work as monitor key for standby mode as exit key for MENU 5 MENU unlock key work as unlock key when communicating with outdoor unit as right moving key for time MENU B Indoor monitor keys 3pcs roll 1 Brightness increase and reduce for adjustment of brightness 2 Colour increase and reduce for adjustment of colour 3 Volume increase and reduce for adjustment of volume C Outdoor unit keys 1 Doorbell key Call ring the bell and trigger photo or video taking there is no one on hook 2 Reset match the communication code with the handset Installation Guide Outdoor unit shall be installed at 1 41 7 meter above the floor and the camera shall avoid facing the sunlight directly ia 40 170mm _ 4 N wed NS SS Installation Steps O 95 1 Drill a hole refer to the dimensio
12. USER MANUAL NAME MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR MODEL KIVOS KDB700mk2 PLEASE READ THE INSTRUCTIONS BEFORE USING THE UNIT SAVE IT FOR USE IN THE FUTURE www elmic pl elmic elmic pl Importer ul Stoneczna 110 NIP 627 114 97 86 Przedsiebiorstwo Handlowo Ustugowe FENIKS Nowa Ku nica 42 350 Koziegtowy REGON 240243739 Cyprian Pawlaczyk Polska Poland Fashion Science amp Technology Taste Enjoy Intelligent Life KIVOS KiVOS is dedicating to equipping modern fashion life with high tech products its KDB700mk2 wireless video door phone is a 2 4G wireless high tech household intelligent product integrating doorbell photo taking video recording intercom monitor and unlocking functions into one Adopting the latest energy saving technology its stable performance and fashionable appearance design make it the first choice of your high quality intelligent life This product is convenient to install and simple to use It is specifically designed for villa users and supporting the use of two outdoor units and three indoor monitors Indoor monitors can communicate to each other communication range can reach 150 meters in open space Battery equipped outdoor unit s proper monitoring function can replace Baby Monitor Adopting the latest energy saving technology its stable performance and fashionable appearance design make it the first choice of your high quality intel
13. arge with 100 240V alternate current creepage fire and damage of the mobile phone and charger may be caused if other voltage is used It is forbidden to shortcircuit the charger otherwise electrical shock smoke and damage of the charger will be caused Do not use the charger at the time when the power cord is damaged otherwise fire and electrical shock will be caused Clear away the dust accumulated on power outlet ASAP Do not place a vessel used to retain water beside the charger to prevent overheating creepage and failure of charger caused by spilling water If the charger is in contact with water or other liquids disconnect the power supply immediately to prevent overheating fire electrical shock and failure of the charger Do not dismantle or remodel the charger otherwise personal injury electric shock fire and damage of charger may be caused Do not use the charger in places with high humidity such as bathroom otherwise electric shock fire and damage of the charger will be caused Do not touch the charger electrical line and power outlet with wet hand s otherwise electric shock may be caused Do not place heavy objects on the electrical line or refit the electrical line otherwise electric shock and fire will be caused Strona 3 z 16 rev 1 0 1 www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR Before cleaning and maintenance f
14. ault is auto video if manual video is set video recorded after calling till being stopped or max record time c Photo Turn into photo menu and operate If there is no TF card screen displays No SD Card and turns back to main menu If there is TF card but no photo record screen displays No File and turns back to main menu If there is TF card and photo records screen displays photo list by time order newest file is listed on the top Choose operating command View Set As Background Delete Delete All or Back by pressing A S press OK to turn into operating In View mode press 48 to view the last photo press 4 to view the next photo e After operation press EXIT to turn back to photo operation menu d Record Turn into Record to check call history e If there is no call history screen displays No Record e Choose operating command Play or Delete by pressing 48 press to turn into operating e If there is card choose command Play the screen displays No Video File and turns back to Call History menu e In Play mode press Ok to pause and play press EXIT to exit e When choose Play and if there is not TF card screen displays No Video File and turns back to Call History Menu e in Play mode press to pause and play press EXIT to exit e A
15. ceiver is connected Consult the dealer or an experienced radio TV technician for help All rights reserved Author instructions KIVOS HK INDUSTRY LIMITED HONG KONG Correction ELMIC PHU FENIKS POLAND Strona 15 2 16 rev 1 0 1 www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR General faults and solutions Fault Cause s Solution s Neglected to press switch button Press switch button Lithium battery is not installed Install lithium battery Can not start up Low battery Charge up lithium battery No connection to power adapter when battery runs out Connect to power adapter Adapter connector doesn t connect to charging port of machine correctly Reconnect correctly Can not charge Adapter doesn t connect to 110V 240V alternating current Plug into the socket to connect to alternating current Doorbell no function Wire connection is not correct Check connection and reconnect Outdoor unit cannot call or connect to Indoor monitor Code match failed Clear code and re match code Image has noisy point or flickers Handset is placed near to TV player microwave oven daylight lamp or mobile phone which produces electromagnetic wave interference Keep handset far away from the interference items Outdoor unit doesn t connect to the power Connect to the power
16. e Choose submenu by pressing 48 press to confirm Remark Turn back to previous menu by pressing EXIT in submenu turn back to standby mode by pressing EXIT in main menu a Video Turn into video menu and operate If there is no TF card screen displays No SD Card and turns back to main menu If there is TF card but no video record screen displays No File and turns back to main menu If there is TF card and video record screen displays video list by time order newest file is listed on the top Choose operating command Play Delete Delete All or Back by pressing 4 4 press OK to turn into operating e In Play mode press OK to pause and play press EXIT to exit e After operation exit automatically or by pressing EXIT to turn back to video operation menu Strona 11 z 16 rev 1 0 1 1 gt www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR b Auto vd Enter into Aut vd to set up video e 55 4 set up Auto video or Manual video press OK key to confirm and exit Default setting is auto video with SD card and manual photo e Press EXIT key to turn back to standby mode step by step Notice Auto video If nobody replies in 5 seconds after connection the indoor monitor starts up auto video Factory def
17. fter operation press EXIT to turn back to call history operation menu Note Unplug the power and reset all the call history will disappear e Language setup Enter into Language menu 5 1 4 set up Language press key to confirm and exit Press EXIT key to turn back to standby mode f ID Enter into Own ID Number to set up ID e Press 4 key set up ID number press OK key confirm and exit ID Number setup menu e Press EXIT key to turn back to standby mode step by step Notice Please don t repeat ID number for every indoor monitors and outdoor units g Standby Enter into Backlight Time menu to set up standby time exit menu automatically after setup 5 4 increase and reduce standby time 10s 60s press OK key to setup and return to Backlight Time Setup menu Press EXIT key to enter into the standby mode h Time Enter into Time and Date Setup menu e Press MENU key to choose figure of time or date e Press 4 key to adjust the figure e Press OK key to set up and return to Date Setup menu e Choose Show set Y date will show Set N date will not show e Press EXIT key to enter into the standby mode Strona 12 z 16 rev 1 0 1 1 www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR i Pas
18. irst pull the plug off the power outlet e Grasp the charger while pulling off the plug as pulling the electrical line will lead to damage of electrical line electric shock and fire 4 Operation and maintenance e Please keep this product dry as rainwater moisture humidity and liquids or moisture content may contain mineral matters that erode the circuit e Do not keep this product in any place with high temperature As high temperature may shorten the lifespan of electronic device damage the battery and cause deformation or melting of certain plastic parts and components e Do not keep this product in any place with low temperature As when being moved from place with low temperature to a place with normal temperature it may generate humidity inside which may cause damage of circuit board Do not attempt to dismantle this product As improper handling by nonprofessional personnel may cause damage of the device not toss knock or shake this product as tough operation mode may damage the motherboard inside the device e If this product is made wet by mistake shut it down and take it out of the host machine holder remove the battery and restart the product after confirming it complete dry in 24 hours Do have the metal parts specially configured interfaces of charger and data line excluded in contact with charger interface to avoid short circuit e Use clean and dry soft cloth to clean the lens infrared lamp a
19. ligent life Safety Warning amp Attention 3 1 E E 3 2 Attention for operation Of this ProCuct cs ccsescsssesssscssessscsessccsssscsscnsessessestescsescsesesesseneg isosessessssccsscseesscesesusscssecuesseesseseesententens 3 3 Attentions for operation charger 3 4 Op ration and MAINTENANCE aa eaaa aria E ETAN EREE Ar aaa 4 Product Overview Model KDB7OOMK2 4 1 4 2 Performance 5 E 6 7 E E 7 ATION SLC PS vss 7 8 Attentions during Installation c0cccccccssccesesssessssccssscsssotsesececssese k eose 8 Wall
20. line and exits monitor calling mode automatically and turns into standby mode Two sets of outdoor units Code connected successfully Press monitor key on indoor monitor to turn into monitor selection menu press 48 key to choose code of outdoor units press OK to turn into monitoring call mode red LED lights up During selection press Exit to turn into standby mode Intercom in monitor mode red LED lights up there is voice speaking for indoor monitor but not for outdoor unit press to turn into both way communication LED shuts down press monitor key again to turn back to one way voice monitor mode One or both way voice could be changed over repeatedly Intercom time is 90 seconds and shall be timed again after changing over Unlock in OK on state mode press g unlock key after successful unlocking it shows unlock icon Photo in monitor mode press photo taking key one press one photo the photos will be stored TF card Video in monitor mode press video taking key start taking video press E video taking key again to stop the videos will be stored in TF card End in monitor mode press EXIT key end monitor and turn back to standby mode In intercom mode press OK to hang off Note in monitor mode red LED lights up in intercom mode red LED shuts down Strona 10 z 16 rev
21. n put the screw rubber plug in then fix the rainproof cover on the wall by screws 2 Connect the charging line according to the wiring diagram the hole for wire getting through suggested 16 0 if charging line comes from indoor lead the charging line pass through the hole if charging line comes from outdoor lead the charging line pass through the bottom of rainproof cover and connect the line 3 Install rechargeable lithium battery BP 6M to outdoor unit the unit starts up automatically 4 Put the top part of outdoor unit into the rainproof cover like the picture push the bottom part make sure its steady and fix it from the bottom by screw then fit on the screw cover Strona 7 2 16 rev 1 0 1 1 gt www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR Unlocking Setting 1 Long press door bell until indicator blinks one time approx 9 seconds with a sound of Beep loosen the key right now unlocking time is set as 1 8 seconds Default unlock setting 2 Keep pressing until indicator blinks two times approx 3seconds more with two sound of Beep loosen the key right now unlocking time is set as 4 seconds 3 Keep pressing until indicator blinks three times approx 3 seconds more with three sounds of Beep loosen the key right now unlocking time is set as 8 seconds Attentions during Installation Pen eS The outdoo
22. nd light sensor Warning improper operation will void warranty Multipurpose Wireless Video Door Phone Intercom System with Multi Monitor Product Overview Model KDB700mk2 1 Characteristics and application e Fashion appearance adopt European design full of modern science and technology feeling suitable for houses of various decorative styles Hidden antenna adopt built in antenna design protect the antenna effectively Extra large range of vision an extra wide angle viewable High resolution color LCD screen adopt 7 0 inch mainstream TFT digital LCD screen achieve outstanding clarity High resolution digital camera adopt 300 000 pixels digital camera image focusing vivid and clear Infrared Night Vision under the environment of insufficient outdoor light the handset can activate the infrared Night Vision to clearly display and record the outdoor scenes e Auto detection it would auto take photo when a visitor come close to the door e One key display simple and convenient to use view the outdoor scenes and take photos just by pressing down one key e Intercom function can choose one way or both way talkback function e Support extended TF memory up to 4GB photo video is stored in T flash storage card e Super long standby high capacity rechargeable lithium batteries are provided adopt intelligent energy saving technology fully charged batteries service time could be up to 10 days
23. ndoor monitor and one outdoor unit The door phone has finished code match and can be used directly If you need more pieces of indoor monitors or outdoor units please contact your local distributors Maximum 2 outdoor units to 3 indoor monitors supported For the added units please reference the Give Code and Receive Code in the Code Menu FE chances or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the re
24. r photosensitive sensor should not be hidden or blocked by other objects Do not face outdoor unit to sunlight directly Do not stick label on the speaker otherwise the sound effect of doorbell will be affected Install the connection line correctly otherwise normal use shall be failure Connection Diagram for Outdoor Unit Unlocking power 12VDC Wire connector of outdoor unit Electrolock Electrolock maintain close if connect 5 Electrolock maintain open if connect 4 9 16VAC or Charger 9VDC outdoor unit black red Remark Provided by users Wall holder Installation 2224 22 J Strona 82 16 rev 1 0 1 www elmic pl elmic elmic pl USER MANUAL KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM WITH MULTI MONITOR Table holder Installation Battery Installation outdoor unit 1 Parallel move the battery cover downward and take it off 2 Insert the lithium battery along the battery jar and set it level mind the front and reverse side of the battery 3 Fit on the battery cover Installation of Storage Card 1 Insert the storage card in the way as shown in the diagram until you hear a clicking sound 2 Improper insertion of storage card may cause system failure please confirm the inserting direction of the card 3 Take out of the storage card pu
25. rm function after match code give code receive code clear code and reset ID number please inform Inform tell all units the pieces and ID numbers in the system 4 Method of inform outdoor unit calls all the indoor monitors all indoor monitors should be matched if there are two outdoor units use the No 2 outdoor unit to inform Clear Code Choose code option press OK key to enter into password menu Input the password to enter into code match menu original password is 0000 If you input wrong password system will inform you Password Error Please Input Again enter into the code match menu until input the right password Press 4 choose Clear Code press OK key enter into clear code menu Press 48 key choose Clear press Back to exit if you don t want to clear anything system will return to code menu automatically after code clear confirmed Format Enter into SD format menu e 55 4 set up Yes or No press OK key to confirm and exit e Press EXIT key to turn back to standby mode o Version Enter into Version menu e Press OK key to view version return to setup menu automatically in 2 seconds e Press EXIT key to turn back to standby mode step by step p Exit Press EXIT key to turn back to standby mode Strona 14 z 16 rev 1 0 1 www elmic pl elmic elmic pl
26. sh in the storage card until you hear a clicking sound then the storage card will pop up Storage Card Introduction This product adopts T flash card as external storage device when there is no storage card in the product the photo taking and video recording functions are unrealizable If a self provided storage card is used e Please use a storage card with Class 4 or above e Up to 4G storage card supported e This machine has automatic cyclic storage function when the storage card is full the original file will be overwritten This machine can connect to computer by USB line Or take out the T flash and connect to computer by reader Attention do not distort extrude or strike the storage card otherwise the audio video material recorded on it may be damaged Functions and Applications 1 Outdoor Unit Starting Up Connect to external power to start up The power source is only battery main MCU is woken about every one second Sleep mode is in saving power mode Monitor and alarm functions could be realized in both two power supply conditions When external power and battery supply power simultaneously the effect is same to external power supports the unit only when battery is in low power the external power will charge the battery automatically green LED flashes every one second it recovers to its previous state when the battery is full Strona9z16 rev 1 0 1 www elmic pl elmic elmic pl
27. sword Enter into Security Password menu e Press MENU key to choose figure of old or new password e Press 4 key adjust figure press OK key to set up If original password is right screen shows success and then return to the setup menu If original password is wrong screen shows failed and then return to code match menu please set up again e Press EXIT key to turn back to standby mode j Sense Enter into Sense setup menu e 55 4 choose OFF or ON press OK key to connect to outdoor unit press OK key to confirm and exit e screen displays success when it finish e 55 4 choose Sense auto record or Sense nightlight press OK key to confirm and exit e Press EXIT key to turn back to standby mode k Ring Enter into Ring menu e 55 4 increase and reduce volume 10 levels in total press OK key to set up and return to menu e Press EXIT key to turn back to standby mode Reset Enter into Restore setting menu e 55 4 set up Yes or No press OK key to confirm and exit e Press EXIT key to turn back to standby mode m Code Enter the Code Menu input password 0000 If the password is wrong screen shows Password error Please input again please input the right password Match code f
28. thout being discovered by the visitors One or both way intercom could be changed over by pressing ey OK and it will time again till 90seconds Unlock in OK on state mode press H unlock key after successful unlocking it shows unlock icon Photo in OK on state mode press photo taking key one press one photo the photos will be stored in TF card Video in OK on state mode press I video taking key start taking video press video taking key again to stop the videos will be stored in TF card Exit in OK on state mode press OK key in monitor mode press Exit the unit turns into standby mode with a sound of Beep Automatic video if nobody answers the call in 5 seconds indoor monitor starts taking video automatically Default is automatic video If setting is manual video once connected the indoor unit will take video manually till being stopped or max taking time 4 Indoor Monitor CALL Outdoor Unit Monitoring In standby mode press ey monitor key on indoor monitor to monitor call In this mode the red LED lights up If outdoor unit receives signal in 5 seconds then it connects to indoor monitor indoor machine turns into normal monitor mode and shows image and speaks voice of outside There is no voice speaking for outdoor unit If outdoor unit doesn t receive signal in 5 seconds then it shows User not on
29. tivate infrared lamps and recognize clearly objects or people within the distance of 1 5meter the best focus of this product is 0 8 meter In addition under complete black condition it displays black and white effects Note Please keep the lens of infrared lamps clean 7 Bright Colour Volume Adjustment In image communication mode e Push Brightness key to adjust brightness every press adjusts one grade e Colour key to adjust colour every press adjusts one grade e Volume key to adjust volume every press adjusts one grade 8 Tamper Alarm Function It shall alarm if outdoor unit is detached from the shell The indoor monitors shall alarm as well as display image once the outdoor unit alarms and the indoor monitors shall produce an alarm file The indoor monitors alarms for max 2minutes Press OK key to stop alarm Note The outdoor unit only could work when it is repowered on and reinstalled into the shell 9 USB Function Description In standby mode with TF card in the monitor plug in USB wire the screen shall display a selection menu USB POWER e Choose POWER by pressing 4S lt the USB only serves as charging function the indoor monitor works as normal e Choose USB by pressing 4 connect the monitor with the computer and read the files through computer 10 Indoor Monitor Menus e In standby mode press MENU to turn into main menu
30. unction match code give code receive code inform Match code Outdoor unit should connect to the Indoor monitor Select Match Code on indoor monitor press OK key enter into the match code mode e Under the standby mode of outdoor unit long press call key loosen key until the sound of a Beep enter into the match code mode e If two units match successfully in 16 seconds indoor monitor displays Success outdoor unit makes Beep Beep Beep sounds as the first outdoor unit e If matching failed in 16 seconds indoor monitor shows failed the outdoor unit makes Beep sound e Press EXIT key on the indoor monitor exit menu enter into the standby mode Notice If failed match rematch the code after connection otherwise rematch the code after clear the code Indoor monitor clear code method refer to the menu function code clear code Outdoor unit clear code method A Transfomer supply long press Clear Code key about one second code cleared after a tick sound B Battery supply press Clear Code key and doorbell key at the same time till a Beep code cleared Give code amp Receive code match more indoor monitors and outdoor units Choose give code on indoor monitor given or received OK key enter into give code mode Added indoor monitor enters into the code menu as above steps choose receive code
Download Pdf Manuals
Related Search