Home

Client Software-4000(V2.00.02) User Manual

1. E secmmente m Whole Week X Copy 8 1 5 Other Recording Modes Other Recording Modes are including Motion detection amp Alarm Motion detection Alarm 58 User Manual of Client Software 4000 v2 0 amp means recording is triggered when two situations happened together means recording is triggered when one of the situations happened The configurations are the same with Motion detection recording or Alarm recording 8 1 6 PCDVR Remote Configuration In this version of client software the PCDVR can be added and configured remotely Please refer to 4 1 1 Add Device for details on adding PCDVR After PCDVR added in client software you can right click the device name and select Remote Configuration Path ASA gt Right click the device and select Remote Configuration IP Video Surveillance Preview Playbackr WET LoginUser1 amp Right click to choose the add area add stream media add device Short key Group Y mb a 9000test Device Management 9 852 g APCDVR Get Channel Name Remote Configuration Software Configuration Delete Nod Recording Feature User Management Remote Configuration contains two parts Camera Configuration and lO Device 59 User Manual of Client Software 4000 v2 0 Remote Contig E E Camera Config Compression ow A Display al Compression oo JP Rec
2. O 6101_Channel 01 icon of hot spot it will become asi and you can move the o EXE 9000test_Channel 02 hot spot by pressing left button and dragging NOE lia O 9000test_Channel 04 O 9000test_Channel 05 O 9000test_Channel 06 O 9000test_Channel 07 O 9000test Channel 08 Belong to E map NewMap1 _ok_ cance 90 User Manual of Client Software 4000 v2 0 Hot Spot Hot Spot Name New Hot Spot1 E Appearanc Text Color Relate 9000test_Channel 04 Input the key words in the Find blank click i pooo 0 Find next O 6101_Channel 01 to find the channel whose name o EXEC 9000test_Channel 02 embraces the key words O 9000test_Channel 03 9000test_Channel 04 O 9000test_Channel 05 O 9000test_Channel 06 O 9000test_Channel 07 O 9000test Channel 08 Belong to E map NewMap1 Cox Cosme If the alarm links to e map is set as alarm handling method in the non edit mode the hot spot will twinkle when there is an alarm of related channel triggered Double click the hot spot the live image of the related channel will pop out 10 2 1 2 Edit Hot Spot In the edit mode right click the icon of the hot spot the edit menu will pop Medan p Properties Select Delete to delete the hot spot select Properties to change the name appearance and related monitoring point of the hot spot 10 2 2 Hot Region Hot region configuration can be used for displaying the s
3. User Manual of Client Software 4000 v2 0 11 2 3 Export Log Click f button to export current logs as Excel or Txt format Software E control Media Program Files C Software O TODOWNLOAD My Computer My Network File name Operation Log Places a Save as lope Excel file xls Cancel 11 3 User Management Click gt 99 User Manual of Client Software 4000 v2 0 IP Video Surveillance Preview Playbackr ETS Add User Login User 1 e Device Management gt Software Configuration o Recording Feature Alarm Link vv User Management 11 3 1 Add amp Delete User Right click the user list on the left and select Add User User Information Input the user name password and select the level User Information for user then click OK to finish User ladmin There are two options for user level Super User Password ts and Guest Super User has all the rights by default as for Verification e Guest you need to set the rights for it Administrator 100 User Manual of Client Software 4000 v2 0 Double click the user name or right click it and select User Information User Information Modify User to change the password and user level a User admin Note The administrator registered when the New ftware ran for the fir n chan software ran for the first can change password and user de level super user can change user
4. 8 Recording Mode4 t Recording Modes Time Period2 00 00 00 gt 1 step Input the mode name or 7 nd 8 Recording Mode7 Time Period 3 00 00 00 2 E he tim ri nd click Save to finish Recording Modes i step Set the time periods and click Save to finis Recon moseo Time Period 000000 8 Recording Mode10 Set recording schedule a mib as 6101 9 9000test lt lt 852MF E ce IPD First click the device or channel name to activate the recording schedule configuration Monday Empty Mode 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Tuesday Mode 01 12 00 23 00 00 00 00 00 00 00 00 00 00 00 00 00 Select the recordi ng date and mode Wednesday Empty Mode 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Thursday Whole Day Mode 00 00 23 59 00 00 00 00 00 00 00 00 00 00 00 00 Friday Empty Mode 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Saturday Recording Mode 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sunday Empty Mode 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Apply to whole week Copy settingto Please select chan cop Record schedule table 41 User Manual of Client Software 4000 v2 0 Select one finished recording mode and a whole week a Mode 01Application success to copy it to Select one channel from list in the device area and click to copy it to other channel selected from the list 7 1 2 Store
5. 5 Video Lost Select Camera Select a camera If Users want to set the event linkage of Video Lost users should select the Enable check box and press Setting The event linkage of Video Lost is the same with Motion Detect Remote Contig a Camera Contig E FP Display JP Compression i amp Record Schedule JP Motion Detect co JP Video Lost P Privacy Area oP PTZ Contig a IO Device 68 User Manual of Client Software 4000 v2 0 Copy to camera E CameraD2 O Camerata Press Copy to to copy Video Lost parameters to any camera that you selected 6 Privacy Area Select Camera Select a camera Select the Enable check box and press Setting to set Privacy Area Remote Config E E Camera Config i i FP Display P Compression P Record Schedule amp Motion Detect P Video Lost JP Privacy rea P PTZ Config Ea IO Device ia Alarm Sensor 69 User Manual of Client Software 4000 v2 0 Mask Area Setting a Press h to add a privacy area ES to delete the area selected E to delete all areas and to set the whole the camera as privacy area The area can be enlarged or dwindled and drag and drop one or more area to change their position Sentii A Mtin AY a Copy to camera O Camerall2 O Camerata Press Copy to to copy Privacy Area parameters to any camera that you selected 7 PTZ Configure Select Camera Select a camera Select the Enable chec
6. button and you will see the pop up message Click the picture to open the capture and click the path to open the capture folder Playback Download C DownLoad 9000 Channe lO 20090416124839 200 9041614847 45861390 00 01 mp4 Image capture is succe X rad i Jus eL Ivana ML C Picture 9000test_IPCha After searching out the recorded file you can click a to download file to local PC You may click on message to open the download saving directory Files download Window 01 9000_Channel 02 SelectAll Start Time End Time 2009 04 16 07 34 08 2009 04 16 2009 04 16 07 53 30 2009 04 16 2009 04 16 08 12 57 2009 04 16 2009 04 16 08 32 26 2009 04 16 2009 04 16 08 51 53 2009 04 16 2009 04 16 09 11 21 2009 04 16 2009 04 16 09 30 50 2009 04 16 2009 04 16 09 50 17 2009 04 16 2009 04 16 10 09 45 2009 04 16 2009 04 16 10 29 13 2009 04 16 2009 04 16 10 34 21 2009 04 16 2009 04 16 10 50 04 2009 04 16 2009 04 16 11 05 52 2009 04 16 2009 04 16 11 10 48 2009 04 16 2009 04 16 11 15 52 2009 04 16 2009 04 16 11 31 30 2009 04 16 2009 04 16 11 50 59 2009 04 16 2009 04 16 12 10 26 2009 04 16 2009 04 16 12 29 55 2009 04 16 2 gt 9010042 Wh o OOOOOOO00000 OOOOOO 07 53 30 08 12 57 08 32 26 08 51 53 09 11 21 09 30 50 09 50 17 10 09 45 10 29 13 10 32 53 10 50 04 11 04 32 11 10 48 11 14 32 Maio 11 50 59 12 10 26 12 29 55 12 49 23 Start download Stop Download E 48 User
7. 23 Add admin password length hint Map 24 Add text color in the hot region and spot menu 25 Add find function in the hot spot menu 26 Upto 4 hot spot images in the map 27 Enlarge hot spot image to 4CIF by double clicking 28 Add previous map resume function when client software restarts Other 29 Add function of pressing F1 to open user manual 30 Reorder the buttons in the main interface 31 Add adjustable alarm info area function 32 Add icon right click menu after minimizing client software 33 Add button tooltip in playback recordings linked by log 34 Move help menu to the main function pane 104
8. Add Device Input device information in the blank of Area device AAA i ice Nam i orma v Find more 4 1 1 Add device dida Register Mode Normal IP Device IP E Port fsoo0 Username Password PC Channel No Multicast Pe a O DNS Address o Belonato area area 1 0 t Device serial o Online Device Cancel 3 1 3 User Login After the administrator registered when user open the client software the login dialog box will pop up shown as below Input user name and password then click Login to start using the client software User Login pa User Password Automatic Login Automatic Login Click to auto save the user name and password user does not need to input them when User Manual of Client Software 4000 v2 0 logged in next time If user wants to change password please select a user name and click Modify If the user name or password is incorrect the dialog box will pop up shown as below Warning A Either user name or password is incorrect If user wants to cancel login please press Quit A note Please stop all the operations e g preview recording playback and etc before switching the users 3 2 GUI Introduction There are 6 areas of Client software GUI shown as below IP Video Surveillance Preview Playbackw Map EA LoginUser1 A Software Preview Alarm Info Area System Area E cio User Manual of Client Softw
9. mil Channel Parameters gt HP Text Overlay Tick Strings 1 i e to enable text overlay double click the strings area to input the characters you want to overlay on the screen A Note If the device is DS 9000 then only analog channel support text overlay MM o channel 2 gt os st 71 MStrings 1 TEST OStrings 2 P1Strinee 3 E 8 5 Account Management The default user name and password of device administrator are admin and 12345 Administrator can remote add delete users or distribute authority for users The new added users are divided into two levels user and operator For Remote Configuration privilege operator has Voice Talk right user does not for Channel Configuration privilege operator has all the rights user has local playback remote playback rights 82 User Manual of Client Software 4000 v2 0 Priorit IP Address Select Hl Account Management Local PTZ Control ma Local Manual Recording ma E Local Playback Local Parameter Settings Local Log Query Local Advanced Management Local Reading Parameters Local Channel Management K Local backup ma Local Shutdown Reboot Y Remote PTZ Control mu v lt T gt User Information Click Add to add user User name abc A Note If you set the IP address or physical address Password po Password verify rr Priority User vw IP Address 0 0 0 0 Physical Addre
10. 2 3 Preset Select one channel and click the ae key on the PTZ control panel and enter preset edit window Select one play window and right click the preset list or click a to add modify and delete preset 35 User Manual of Client Software 4000 v2 0 Move the PTZ to the position you want and click Add Add Preset Preset Name to input preset name then click OK to finish Then double click preset in list or click to call it Right click preset to modify or delete this preset click z to delete preset as well 6 2 4 Sequence After adding two or more presets for one channel you can set a sequence with presets for PTZ 1 step select one channel and click cal key to sequence 01 l 02 sequence 02 show sequence list 03 sequence 03 04 sequence 04 05 sequence 05 06 sequence 06 Of sequence 07 O06 sequence 08 na Barmmianra Fe ll Sequence Configuration nd 2 step Click or right click sequence name then select the preset you would like to enter sequence configure menu Add Sequence jDelete Sequence Sequence Configuration Sequence Sequence 01 add the sequence 2 3 step Click you can also click preset area to select presets from the list Add Sequence Delete Sequence 36 User Manual of Client Software 4000 v2 0 Sequence Configuration 4 step Set the time and speed for the preset A Note Dwell time is between 1 and 128s dwell y as
11. 30 speed is between 1 and 140 nas Sequence Derete Sequencd sae Sequence Configuration 5 step Repeat the 2 and 3 step to add the presets to the sequence Then click save key to save sata Preset 3 Preset4 the settings Delete Sequence and call stop them by clicking and e keys 6 3 Video Parameters Configuration Click the key to show the video parameters configuration menu Move lel to adjust the video parameters Range 1 10 default value 6 37 User Manual of Client Software 4000 v2 0 6 4 Keyboard and Joystick Control The client software supports keyboard DS 1002KI DS 1003KI and joystick control PTZ and preview window layout 6 4 1 DS 1002KI DS 1003KI keyboard control PTZ Connect Ta Tb of DS 1002KI DS 1003KI keyboard to Rx Rx of RS 485 c RS 232 converter then connect converter to COM interface of computer Click Setup PM set E Advanced and select keyboard serial ports NULL by default in Other Configuration Click gt Save to save parameters W Enable Alarm Screen E map Two Screens Displi Start Inspection Serial Number NULL gt Information Press EXIT button on the keyboard to switch control Controlling window layout state A message Controlling window layout will pop up Keyboard afterwards and then you can move the green active box by using keyboard joystick ES Information Press
12. 7 2 Alarm Output Control Sa mlb H a 6101 H a 9000test Fortify Device Synchronization Start Voice Talking Right click the device name and the sub menu will pop up Select Alarm Output Control to turn on or off the alarm output and define alarm output name Device Status Alarm Output Contral All Main Streams All Sub Streams Remote Control Panel Alarm Output Control Click and it becomes key so as to turn on the alarm output and activate the name modified a function re click key to turn off the alarm output 5 7 3 Device Status Right click the device name and the sub menu will pop up Click Device Status to get device working information including channel and hard disk status 32 User Manual of Client Software 4000 v2 0 e 3 mlb Get Device Status H 3 6101 a eee Fortity Rec No Record ayice Syn rat No Record Device Synchronization tad No Record Open intercom channel 1 No Record No Record No Record Open intercom channel 2 Nac Alarm Output Control All Main Streams All Sub Streams Remote Control Panel 5 7 4 Remote Control Panel Right click the device name and the sub menu will pop up Select Remote Control Panel and the control panel will pop up shown as figure below You can click the buttons on the panel and control device like using front panel Control Panel 9000test Normal Signal lost Signal lost Signal lo
13. Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Start Recording Local Recording Files Query Local Recording Files Query Local Recording Files Query Stop Recording Local Recording Files Query ad de sd dd do de do do dd dd do do do dodo dd do do dodo do do do do do do do do center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center CI 2009 3 18 23 59 59 H ATM DVR ATM DVR ATM DYR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DYR ATM DVR ATM DVR ATM DVR ATM DYR ATM DVR ATM DVR ATM DVR ATM DWR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR User Manual of Client Software 4000 v2 0 Enable Query by user e and you can search log by users 2009 3 10 00 00 00 Operation Log 2009 03 10 2009 03 11 2009 03 12 2009 03 13 2009 03 14 2009 03 15 2009 03 16 2009 03 17 2009 03 18 2009 03 11 09 37 40 2009 03 11 09 37 40 2009 03 11 09 37 40 2009 03 11 09 37 40
14. Setup Under Local Recording Setup there is Store Setup menu Choose saving hard disk of the recorded files from disk group If Cycle Record is selected and each disk space is less than 2G the earliest recorded files will be overwritten to continue recoding If not when the disk is full the Disk Clean will pop up after cleaning disk and if the disk space is larger than 2G the schedule recording will restart Record file size can be selected 32M 64M 128M 256M Please select disk group O Diskc DISKE Select All iw Cycle Record Record File Size 1641 k 7 1 3 NVR Storage Server Recording Configuration You can remote configure the recording schedule and playback the recorded files of the NVR storage server through client software shown as figure below 42 User Manual of Client Software 4000 v2 0 NVR Server Please select NVRConfiguration NVR Confi NVRConfiguration on El mib Record plan mode Please select plan templ Disk Group Ha 5101 9000test Remar HE S52MF E H IPD Seba Sitesi Media Sere IP Address 0 0 4 0 Part aes E 12 13 B 15 16 17 1 20 21 g Please select disk group Monday Sa TM Tuesday Wednesday mes A A Copy settingto Please selectchan eee Friday Saturday Sunday hh el Des ey ise ey es Sy EPI 7 1 3 1 Add NVR Server Click SAB SEE Wee key to enter NVR configuration interface NV
15. The descriptions above are defined as secondary output Aa card 1 Wout 1 For second output Enter hardware decode configuration interface and tick C out_2 For second output the channel that set as secondary output and the channel status will becomel Second Ouput is vacant Yout Name Yout_02 Click a in the window division to display secondary output list nose The system will clear the previous configuration information of the secondary output channel 30 User Manual of Client Software 4000 v2 0 5 7 Others 5 7 1 Voice Talk amp Broadcast a 1 mlb 6104 In preview interface right click the device name and the sub menu will pop up Click Start Voice Talking to talk with the selected Device Synchronization device Start Voice Talking Device Status Alarm Output Control All Main Streams All Sub streams Remote Control Panel If the device is 9000 DVR then there will be two voice talk channels for choice Device Synchronization Open intercom channel 1 Open intercom channel 2 Device Status Alarm Output Control All Main Streams All Sub Streams Remote Control Panel A Note Client software only supports one voice talk at one time 31 User Manual of Client Software 4000 v2 0 Right click area name and select LAN Broadcast to talk Fortify All to the area Disalarm All All Main Streams All Sub Streams All Synchronization LAN Broadcast 5
16. Time amp Linkage Method q step Set the fortify time for alarm input Click Settings in Fortify Time menu Select Weekday as some day of the week or the whole week for recording time The All Day Record or 8 Segments can be selected as well Note The time of each segment can not be overlapped 57 Fortify Time CM u u u u si All Alarm Signals Settings Settings All Alarm Signals v copy HG a HV Gu GNA fla a fy fa fa fe Whole Week A E A User Manual of Client Software 4000 v2 0 Linkage M channel 12 gu step Set recording channel triggered by alarm gt O Channel 15 Click Settings in Linkage menu and select Trigger Z Channel 16 Recording tab Enable the recording channels you want Analog camera 1 v 6 step Enter schedule recording interface Click to enable Recording Settings settings JMonday Settings 7 step Set the recording time for alarm input TA Secret Motion Det X Click Settings in Recording Time menu E emer gt Ey ma E Select Weekday as some day of the week or the whole m week for recording time r S S The All Day Record or 8 Segments can be selected as Eii S ol S SERE well Begs S 2 sl eenia io A Note The time of each segment can not be wens Sl E 3 El overlapped ESE
17. area then start cycle playing the first 4 channels will be displayed in the window after one cycle period the last 4 channels will be displayed in the window Click button in the preview panel to stop the channel mixed cycle of short key Click key to display the first 4 channels click key to display the last 4 channels A Note Click button or to pause the channel sequence cycle of short key This function needs short key configuration first Find more 4 3 Short Key Configuration 5 2 2 2 Cycle Play of Group Channels Click Group key to display group channel list Please stop playing before switching to group channels Click key to start mixed cycle play Take 2x2 window division for example if there are 2 groups in group area each of them has 4 channels then start cycle playing 4 channels of the first group will be displayed in the window after one cycle period 4 channels of the second group will be displayed in the window Click key to display the first 4 channels click key to display the last 4 channels 5 2 3 Cycle Play of Device Group D center Double click the device name and all the channels of the 638 ATM DVA er n320 7 234 4 01 a Er n3920 7234 4 02 the 1 channel T Channel 03 er n3920 7234 4 04 3 3000 device begin to cycle in the selected window division from 22 User Manual of Client Software 4000 v2 0 gt Group ATM DVA_ 192 0 7 234 4_ 01 Double click the group nam
18. channels of the device can be moved to the selected group 17 User Manual of Client Software 4000 v2 0 Right click to choose the add area add stream media add device Short key Group a mib Default Group 6101 Group1 3 Channel 01 3 6101_Channel 01 SE ENTES 3 9000test_Channel 01 3 Channel 01 R 9000test_Channel 03 3 Channel 02 3 9000test_Channel 13 3 Channel 03 Group2 3 Channel 04 3 9000test_Channel 01 3 Channel 05 R 9000test_Channel 02 3 Channel 06 3 9000test_Channel 03 3 Channel 07 3 9000test_Channel 04 3 Channel 08 3 9000test_Channel 05 3 Channel 09 3 9000test_Channel 06 3 Channel 10 3 9000test_Channel 07 3 Channel 11 R 9000test_Channel 08 3 Channel 12 3 9000test_Channel 09 3 Channel 13 3 9000test_Channel 10 3 Channel 14 R 9000test_Channel 11 3 Channel 15 3 9000test_Channel 12 3 Channel 16 3 9000test_Channel 13 3 PChannel 01 3 9000test_Channel 14 852MF E 3 9000test_Channel 15 3 Channel 01 3 9000test_Channel 16 3 9000test_IPChannel 01 Using and keys to adjust the channel sequence in the group list Using key to delete the channel or group in the group area A Note One channel can be added to one group for only once Different groups can contain the same channel Max 50 channels can be added to one group 4 3 Short Key Configuration Click short key button to enter short key management window Only the
19. er ia T E N O 40 TAL RE COLONIE Aa 40 7 AsV kOCaLRECOrAIN E AS a Aa ae 40 Pz LOTO SEUD uT E E A AA A E A 42 7 1 3 NVR Storage Server Recording Configuration cccccooocccnnnononcnnnnnnonannnnnnnnnnoss 42 FALAJI NVR SEVE uan 43 7 1 3 2 NVR Recording Mode Configuration cccccooocccnnccnoncnnnnnnnnanonnnnnnanonnnos 44 7 1 3 3 NVR Recording Schedule Configuration occcccccoooccnnnccnoncnnnnnonanonnnos 44 D2 PN AV O 45 Liz ROMO VOD a A E oa ae 45 Fask REMOLE VOD OQUE o dos A o gay eee 46 V2 Ae Playback C OnO o a A A aie eae T 47 Te 2 OCA PAY DaO ceann a 49 Taal Local Playpack QUA 49 722 2 Playoack CONTO Mea a wate 50 Chapter 8 Remote Configurador dada 52 8 1 Remote Recording Configuration cccccssssecccccesseccccceeeeescceecueeseceeseaeeceeeesauaeseeeees 53 8 1 1 Encoding Parameters Configuration cccccsssscccccsseeccecseesseeceeseueeeeeeseaensees 53 9 12 Schedule Recorde ds 54 3 1 3 Motion Detection Recording ii 54 SL Alarm Recorded ais 56 User Manual of Client Software 4000 v2 0 8 15 OME Recording IO COS iaa 58 8 16 PCDVR Remote Configura a Aaniea in 59 8 16 1 Camera Contursi 60 AS OD E A LI 71 eA alba E E IE anaes E waa coat ns A E ade cic ct nue anes sea TA E E E seas 72 8 2 L Motion Detection Adi aR a a ah 72 8242 SISM aI LEVEN Da iaa dada 73 SLIN WOOO EOS cago carrer E T ENA 74 8 24 VIdEO Tampere bs 76 S2 LEC UNS a ee ld A 77 8 NetWork COnNNEUrI UON ee atac 78 S L BASIC CONTEC ULA
20. in the note of start wizard will pop up shown as figure below Open the Wizard function to add device Click OK to start the wizard and add the device click Cancel to exit the wizard 1 step According to the hint click setup to enter adding device interface User Manual of Client Software 4000 v2 0 IP Video Surveillance Preview Playbackw Setup Help Click Configure button to add device nd 2 step According to the hint right click to add device IP Video Surveillance Preview Playbacky ETS Right click to choose the add area add stream media add device Add Area Right click to add the regional node Input a name in the blank of Area Name click OK to save the area Software Preview Short key Group Add Area rea Information Area Name Upper Area Name LoginUsert A Login User 1 2 Software Configuration e Ee Recording Feature Alarm Link User Management User Manual of Client Software 4000 v2 0 3 According to the hint right click the area name to add the device IP Video Surveillance Preview Playbacky ETS Login Usert amp Right click to choose the add area add stream media add device Short key Group Add Area Right click Regional Add Stream Media Server node to add device Add Device Save All Configuration Files Set All Configuration Files Delete Nod Recording Feature User Management
21. in the recording mode click Stop button to stop recording and the preview cycle play are stopped as well 5 5 1 Recording Setup So Local Recording Setup Configuration Path A gt Please select disk group DISKC O DISKE Select All Select NULL jw Cycle Record Record File Size Save Select the saving hard disk of recorded files in Store setup When previewing click key to start recording and the icon becomes asikil The channel icon becomes as 25 User Manual of Client Software 4000 v2 0 Manual recording is suc After recording the hint window with index of recorded C RecordFile 20090720 172 files will pop up click the hint to open the target folder 8 114 111 8000 1120090720 101157 mp4 5 5 2 Capture call 2277 Path Configuration Configuration Path gt software Configuration gt Default saving path C Picture click key to change the saving path Saving path for remote files downloading EAD ownLoad Saving path for image catpure C Picture Browse Saving path for remote configuration file CAS aveRemoteCtgF ile Browse When previewing click a key to start capture mne Image capture is succe PA After capture the hint window with capture index will pop up click the hint to open the target folder C Picture 852MF E_Channe 5 6 Hardware Decode If there is video audio decoding card installed in the computer then this funct
22. means schedule recording pink means motion detection recording white means no recording 7 1 3 3 NVR Recording Schedule Configuration 2 center 539 ATM DVA 5 192 0 7 234 4_01 5 192 0 7 234 4_02 7 Channel 03 5 192 0 7 234 4_04 63 8000 3 9000 1 step Select the device or channel for recording 44 User Manual of Client Software 4000 v2 0 qn step If necessary enable stream media server and input the IP address and port W Enable Stream Media Server IP Address Pot 554 3 step Configure the recording schedule Select the mode from Recording plan mode and select the disk group to save the recorded files Click key to finish configuration Record plan mode Template 01 bl Disk Group Disk Group No 01 Remarks All date record Ww Enable Stream Media Server IP Address 172 8 57 3 Port 554 Pt fs fe ts fe fz fas io af ss ve os a6 rs elo as a2 Monday i Copy setting to Chan nel 01 T Copy Modify Template Save 7 2 Playback There are 2 options for playback one is local playback and the other is remote VOD which can be chosen by clicking Playback Local Playback Searching the recorded files from hard disk of PC Remote VOD Searching the recorded files from hard disk of DVR or storage server 7 2 1 Remote VOD Playbackr oc aybac 3 Click and choose Remote VOD O Melon dss to enter the playback int
23. to enable NTP function A Note Time Synchronization Interval 010080 min default 60min If the device connected to the public network the IP address of NTP server provided by carrier can be input in the blank Server Address If the device connected to private network the IP address of NTP server built by NTP software can be input the blank Server Address 3 3 5 NFS V Enable NIP Server Address NTP Port 123 Synchronization 60 Hour Select Time Zone GMT Dublin Edinburgh London v GMT Hour 0 Minute V Adjust By NFS configuration recorded data can be saved to the network storage disk provided by NAS server Select mi Network Farameters gt a HFS Settings Input the IP address of NAS server in the blank Server IP address input the saving path allocated by NAS server in the blank File Path A Note Make sure that the device supports NFS function and NAS server allocated the storage space correctly DS 9000 device does not support NFS function 8 3 6 E Mail Disk No Server IP Address File Path 1 172 8 98f 11 fdvr 123 Through E mail configuration the e mail can be sent to the designated mailbox when there is an alarm Select mil Hetwork Parameters gt P E mail Settings If server authentication is needed enable it i e w and input user name and password Input the sender and recipient information if need to send picture you can enab
24. 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 16 22 37 2009 03 12 16 22 42 2009 03 12 16 22 44 2009 03 12 16 22 49 2009 03 12 16 22 52 2009 03 12 16 22 57 2009 03 12 16 23 08 2009 03 12 16 23 23 2009 03 12 16 23 35 2009 03 12 16 23 36 2009 03 12 16 23 43 2009 03 12 16 23 46 2009 03 12 16 23 50 2009 03 12 16 23 52 2009 03 12 16 24 03 2009 03 12 16 24 05 2003 03 12 16 24 23 2009 03 12 16 24 24 2009 03 12 16 24 39 2009 03 12 16 40 58 2009 03 12 16 41 03 2009 03 12 16 41 08 2009 03 12 16 41 15 2003 03 12 16 41 21 Acie Up to 2000 logs can be displayed every time 11 2 2 Playback Linked Recordings Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Start Recording Stop Recording Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Start Recording Local Recording Files Query Local Recording Files Query Local Recording Files Query Stop Recording Local Recording Files Query If the logs contain linked recordings
25. 92 0 7 234 4_01 this channel and the icon will become T 1192 0 7 234 4 02 7 Channel 03 5 192 0 7 234 4_04 Right click in the play window and the play menu will pop up Click Stop Play and the live view will stop el etl URE Open Voice Meanwhile the play icon will become 5 ma BEE Capture Start Recording Stop Play Click the key in the preview panel to stop all the live view channels 5 2 Cycle Play 5 2 1 Configuration Click Setup key to enter the configuration interface Then enter the local configuration by click Software Configuration key Playback Configuration 4 Cycle Play Cycle Timels E Playback Feature Do not drop any frame r Network Feature Shortest delay mode Window Display Mode Full Screen Enable Cycle e i Click Cycle Play to enable cycle play and input the cycle time then press Save and return to preview interface A Note Cycle time should be between 20 and 3000s Disable Cycle k Cycle Play Clic to disable cycle play and save 21 User Manual of Client Software 4000 v2 0 5 2 2 Mixed Cycle Mixed cycle mode enables client software cycle previews channels of the group or short key the default window division is 2x2 5 2 2 1 Cycle Play of Short Key Channels Click List key to display channel list Click key to start mixed cycle play Take 2x2 window division for example if there are 8 channels in the short key
26. Add Sub E map to add sub map Add Hot Spot Select Properties to change the map name and image file Select Delete to delete the selected map Add Hot Re eva Delete Properties 10 2 Map Configuration Map configurations need to be done under the map edit mode 10 2 1 Hot Spot Through hot spot configuration user can mark out the location and live view of the monitoring points on the e map 89 User Manual of Client Software 4000 v2 0 10 2 1 1 Add Hot Spot UDIP 1 step Enter add hot spot interface Right click the image name in the map info area or the _ ___n image itself and select Add Hot Spot Add Hot Spot Add Hot Regions Delete Properties Hot Spot Hot Spot Name NewHotSpott Appearanc e Text Color LI Relate E step Input the name of hot spot click er and select the icon for hot spot 6101_Channel 01 9000test_Channel 01 9000test_Channel 02 9000test_Channel 03 9000test_Channel 04 You can also click LI to change the color of characters 9000test_Channel 06 9000test_Channel 07 9000test Channel 08 Belong to E map NewMap1 ox cancer O O O O O 9000test_Channel 05 O O O Hot Spot Hot Spot Name New Hot Spot 3 step Select the channel in th ae L step Select the channel you want to relate to in the E S R list Related Camera and press OK to finish ee A After succeed to add hot spot move the mouse to the
27. Client Software 4000 V2 00 02 User Manual User Manual of Client Software 4000 v2 0 Index Chapter 1 Welcome to Client Software 4000 V2 0D ooonncnccccnncccnnncnnnaccnnnnnnnnaccnnnonaninonoss 1 EE OVIEDO 1 1 2 Computer Disposition Request oocccoonccocccnoncnocnnononononcnncnononcnnoncnnnncnnananoncnnananoncnnos 1 LS CONVENIO ot 1 Chapter 2 IMSS OS la ci n 2 2 LANStall the Software nia A IA Na 2 22 AIS TAN SOTUW us aa aaa dos 3 Chapter 3 BASIC OD CAO Sida dedos 4 SUN A OSIM dada 4 3 1 4 WSCC TOR the Tirst TINO iria emdnovareeoo os 4 3 L2 AO DEVICE WI Za esitenu vd a a 4 SS SERLO Nada tes 6 SAGULO UO a A A E haan aa cseetuanase Nena A TO 7 Chapter 4 DEVIC Mande Mediano 10 AA EISU COMMEULALION iwexescicseacisacsdubiautscenceassisnuievied EO OAA O T 10 AAA DEV a dacuoestlads aa ise ean eaei 11 Ae LZ ChannelCon EURO Meesi a dl 13 4 1 3 Channel Configuration of 9000 series DVR occccccccncccnnnncnnonccnnnnnnanonnnnonanononos 13 4 1 4 Add Stream Media Server ictoria nenon a a a i 15 4 1 5 Import Export Configuration Files oooonccnnccnnnnncnnnnonanncnnnnnnanonnnnnnnnanos 16 12 GlOUl COMMS UFO is 16 ARL GOUD A A O 16 CNA Ma a 17 4A Short Key COMMBUTAU Nesnenin a ci 18 Chapter 5 PSI W EEA ENEE PEE E EEA A E A E OEA ETE A 19 51 NON CYCIe Previe Wan 20 Be APIA DY NOE aii 20 BZ MOTE KEV PROVIEW idad 20 O aid 20 52 Cyle Pla 21 Sil CONTEO AAA 21 IN 22 5 2 2 1 Cycle Play of Short Key C
28. Client Software 4000 v2 0 5 step Set the Trigger Recording for linkage Click Setting in the linkage area and select Trigger Recording tab 6 step Set the detection recording time Select Weekday as some day of the week or the whole week for recording time Click MEt for the recording type The All Day Record or 8 Segments can be selected as well Note The time of each segment can not be overlapped The valid time is the intersection of the motion detection time and motion detection recording time 8 1 4 Alarm Recording Select 1 Alarm Parameters gt Alarm Input Settings 1 step Select alarm input y e If the device is 9000 series DVR you can click Switch to IP channel to configure the alarm input of IP channel 56 Linkage IY eae M Bement Bf agnen E Bement E secano E EE E EAN mj E secmenta o cancel Monday E fmotionoet 3 senecue Ree Jo fseneculo rec _ Jo schedule Rec Jo schedule Rec _ Jo schedule Rec Jo schedule Rec fp scheduie Ree Whole Week z copy lla Gat Gat Gab R la taf Settings Settings All Alarm Signals y copy User Manual of Client Software 4000 v2 0 2n step Select the type of alarm input NO or NC Note The settings will become effective after rebooting gr step Enable Alarm Handle to activate Fortify
29. EXIT button on the keyboard to switch control Controlling PTZ Keyboard state A message Controlling PTZ will pop up afterwards and then you control PTZ by using joystick Press PTZ control button on the keyboard to control iris focus zoom wiper light and preset calling by using joystick or function buttons Setup Click Software pe ports as NULL by default to release the serial ports Advanced and select keyboard serial 38 User Manual of Client Software 4000 v2 0 6 4 2 Joystick control PTZ Information Insert USB joystick and a message will pop up shown as Found USB Joystick press No 12 key to switch function figure on the right and define switch button afterwards ES Information Press switch button a message Controlling window Controlling window layout USB Joystick layout will pop up afterwards and then you can move the green active box by using USB joystick Information Press switch button a message Controlling PTZ will l Controlling PTZ USB pop up afterwards and then you control PTZ by using USB Joystick joystick Press PTZ control button on the keyboard to control zoom and preset calling by using USB joystick A Note Switch button is different according to different models of USB joystick By default client software usually defines the last logic button as Switch button e g if there are 12 butt
30. IP camera IP address 1 172 8 114 111 Online 172 1 5 88 1 Offline Double click the selected channel to modify the parameters Click Delete to delete the selected channel 14 User Manual of Client Software 4000 v2 0 Modify Device information Device Information i Da x After that you can change the se ReaisterMode NormallP v Device IP 122 224 216 148 Port channel number according to the added Username admin Password channels Double click the device name to ChannelNo 17 Multicast 0 0 DNS Address 0 0 0 0 Belona to area mid Device serial DS 9016HFI S1620090210BBRRWCVU modify the device information Anote 9000 series DVR max supports adding 16 analog channels 8 ch IP Camera please refer to the user manual of DS 9016HFI S for more details 3 3000 i Channel 01 i Channel 02 After that the added IP channel will be seen in the channel er Channel 03 list of the device er Channel 04 7 Channel 05 If IP channel can not be connected the n shown as ee T Channel DE 7 Channel 07 7 Channel 08 7 Channel 09 7 Channel 10 7 Channel 11 7 Channel 12 7 Channel 13 7 Channel 14 7 Channel 15 7 Channel 16 PChannel 01 ey PChannel 02 PCharnel 03 IPChannel 04 4 1 4 Add Stream Media Server Adding stream media server can solve the network confined problem and reduce the bandwidth stress Add Stream Media Server Right click the
31. Manual of Client Software 4000 v2 0 You may go to Configure gt Software Configure gt Path configuration to change the saving directory Path Configuration Saving path for remote files downloading ICADownLoad Browse 7 2 2 Local Playback Remote VOD cx MASA Click and choose Local Playback LEA pea dat to enter the playback interface IP Video Surveillance Preview Playback Map o LoginUsert ML E mib Local Playback ap 6101 Window01 Window02 9000test 852MF E a IPD Window03 Enable Synchroni 07 21 2009 01 05 O06 OF 08 12 43 44 45 19 20 22 26 2F 2 2 TAZ Search eos ipo E em eserves irene 7 2 2 1 Local Playback Query 1 step Select the playback channel and window a step Select recorded files type and query time 49 User Manual of Client Software 4000 v2 0 le 44 03 03 2009 gt SUN MON TUE WED THU FRI SAT All O1 O2 o 0 06 OF Oc 09 11 13 414 15 16 n ee eee eg Z2 23 25 26 2f 28 F 3 Manual Record Schedule Recording Alarm Handle Save Download 3 step Click key to search the matched recorded files if there is then it will shows in the time axis area q step Click key to start playback You can choose time by dragging mouse to the time you want on the time axis Select one channel then drag into playback window If there is recorded file in this day software will playback it from the very beginnin
32. R Configuration SERVER 1728 114 100 8320 NVR Name SERVER 01 IP Address 172 8 114 100 8320 Add Input the NVR server name IP address and port and click key to finish Anoie Max 16 NVR servers can be added to the client software The default server port and VOD port are 8320 and 8554 43 User Manual of Client Software 4000 v2 0 7 1 3 2 NVR Recording Mode Configuration NVR Server 1 step Select added NVR servers from a 6101 I list to enable modifying recording EA q000test schedule a 852MF E E IPD ya step Set the recording time for the mode Click the mouse to add recording schedule right click to cancel recording schedule Then click key to save the settings Select Template 01 and recording type including Schedule Recording amp Motion Detection Recording The using left click to add section right click to delete section in the date area Setup NVR recording template AN Modify template will affect recording channel Empty Recording Mode Name Template 01 All date record 8 Template 01 plate 02 Schedule Recording C Motion detection alarm recording plate 03 llorare sera e io as v2 oa ue os 0607 5 99 20 1 2 plate 04 Monday plate 05 plate 06 Tuesday plate 07 plate 09 plate 10 plate 08 i Left click add section right click delete section A nore The unit of recording mode is half an hour green
33. TION sd stc 78 8 APPP OLE aana a O a a uae aeeauns 78 6 355 DON Sa Oe ee Ra hen 79 SONT rada 79 A as 80 3 EM dido 80 gA Channel CONMSUallON AO 81 8 4 Channel Display Seting S nad 81 e PANA o 0 MaS Kanoen a a N 81 Bt TEXT OVENI a a 82 SO ACCOUNT MANN di A EA 82 SO DIN 84 Chapter 9 AMAN a 85 inka ge Conie talonsa nana isoan ns ents Reaueansan weet a eases Games 85 92 On Guard amp Of GUISA 86 Chapter 10 EMI adn 88 TOA AGG Mis ed 88 HOTZ Map COn mera ON ada 89 A A A eeu eee ean 89 10 2 LA Ada HOSP tirada 90 10 221 2 EME OSO ia 91 10 22 TOU RO BION ai 91 10 22 1 Ada HOt REGION sisiacii dante eceaade eterna treo aed 91 10 222 EE HOU RECIO Na 92 Chapter ECS a e 94 11 Sotware Con eur UO as S 94 Tl QPOs A et aa a ee a hese Ral Nod la A 96 IEZ T OR UE e O A o E a AT R 96 11 2 2 Playback Linked Recordings cccccooonccnncconononnnccnnacononononanonnnnononccnnnnonanennnnos 98 VERSE LOS nanasan s a N a a eee eee ss 99 113 OSCR Manase mentinerii a o o de a eat Rl 99 135 LOO Sc Delete Use dad 100 TL2 User RENS DISCRDUTION iia dial 101 User Manual of Client Software 4000 v2 0 Appendix 1 uu eeeeccee sees V2 00 01 New Features V2 00 02 New Features User Manual of Client Software 4000 v2 0 Chapter 1 Welcome to Client Software 4000 V2 0 1 1 Overview Client software 4000 V2 0 is the application specially developed for embedded DVR It is applicable to DVR DVS IP Camera and IP Dome There may be techn
34. _Channel 01 Window 02 9000test_IPChannel 01 9000test 3 Channel 01 Al m 07 21 2009 Tue 00 00 53 3 Channel 02 8 Channel 03 3 Channel 04 3 Channel 05 3 Channel 06 3 Channel 07 8 Channel 08 3 Channel 09 3 Channel 10 R Channel 11 WO VIDEO e3 Channel 12 a f IPCanera 01 3 Channel 13 3 Channel 14 3 Channel 15 07 21 2009 Tue 00 00 37 07 21 2009 Tue 00 00 33 3 Channel 16 3 IPChannel 01 3 IPChannel 02 852MF E IPD Window 03 9000test_Channel 04 Window 04 9000test_Channel 05 NO VIDEO NO VIDEO Query By Card No File Type Jan E Synchronous Playback 444 07 21 2009 gt gt gt i 12 1 C NEN NZ SUN MON TUE WED THI sar f Ox t 04 05 07 11 12 14 18 49 25 26 28 Camera 04 Camera 05 Descriptions on playback buttons es a 47 User Manual of Client Software 4000 v2 0 ae Full Screen Play Speed Adjust Bar A ote In the single frame playback mode every time you click button the recorded files will play forward by one frame Only one window audio can be opened at the same time when in VOD mode If the audio of next window opens then the audio of previous window will be closed During playback click once to set begin time of video clip click it again to set end time of video clip After saving the video clip a message will be raised click it to open video segment You can also get the remote capture by clicking a
35. ach 4002MD card decodes 2 channels each 4004MD card decodes 4 channels and so 27 User Manual of Client Software 4000 v2 0 on Support decoding and cycling play TV wall on amp The images from the play window of client software and TV wall are decoded by MD Preview on card which needs to configure in the hardware decode configuration TV wall on amp The images from the TV wall are decoded by MD card the images from the play window Preview off of client software are decoded by CPU If the resolution of all the images is CIF then the max decoding channel number is 4 channels for each 4002MD card 8 channels for 4004MD card If the resolution of all the images is D1 then the max decoding channel number is 2 channels for each 4002MD card 4 channels for 4004MD card Y Tips Video Output Modes including PAL amp NTSC A Note The video output mode of images from device and TV wall need to be the same standard or else the image will become abnormal 5 6 1 2 Hardware Decode Output Window Configuration The output window panel has a multi window division according to the total MDI card BNC number One window is related to one BNC Take one 4004MDI card for example there are 4 BNCs and the output window panel will show you 4 windows division Window is named as 01 01 02 01 03 01 and 04 01 Select one window on output window panel and click window division button to select a window divis
36. als uploaded from the device client software can configure the different linkages for them 9 1 Linkage Configuration y Alarm Link Path IP Video Surveillance Preview Playback ET LoginUser1 amp Y mb Alarm Type 6101 O Sensor Alarm op ES O HDD Full Alarm g 852MF E O Video Loss Alarm IPD O Motion Detection Alarm O HDD unformatted Alarm O HDD Read Write error Alarm O Video Tampering Alarm O Video Standard Mismatch Alarm O Illegal Access Alarm Device Management Software Configuration Recording Feature A Alarm Link i User Management Alarm Link Type C Pop up image when alarm occurs O E map Alarm O Sound Alarm O Alarm Link Recording Copy settingto All Devices s 1 step Select the device from the device area on the left activate the alarm type and alarm linkage type options Alarm Type Sensor Alarm O HOG Full Alarm 2 step Select the alarm type after selected the alarm O Video Loss Alarm Motion Detection Alarm type status will become me O HOD unformatted Alarm HDD Reads tite error Alarm Video Tampering Alarm Video Standard Mismatch Alarm O Illegal Access Alarm 85 User Manual of Client Software 4000 v2 0 Alarm Link Type O Pop up image when alarm occurs O E map Alar type and status means selected Alarm Log 3 step Select the alarm linkage type for the alarm O Alarm Link Recording Descriptions on Alarm Linkage T
37. annel Information Double click the channel name and the ten Modify Channel Information dialog box will ChannelName EMMAN Channel i pop up Device Name ATM DVR IP Address i 26 11411 Protocol TCP Stream Type Main Steam seamos Stream Type Choose main or sub stream for the channel A Note The channel name will be replaced with the name saved in the device if the option Get channel name is selected 4 1 3 Channel Configuration of 9000 series DVR If the 9000 series DVR is added to client software then the IP channel management and enable or disable analog channel functions are available 13 User Manual of Client Software 4000 v2 0 Channel Configuration Right click the device name and select Analog camera IP camera Remote Configuration then the Channel IP address Ll Port Enable or not Configure menu will pop up The Analog Camera will show by default Double click the selected analog channel to enable or disable it note 9000 series DVR can not preview and record this channel after it is disabled unless it is enabled again Click IP camera to enter the interface of IP channel management IPCamera Parameter IFChannel no IF address Fort Click Add to add IP channel User name Input the IP address user name Password password and port and then click OK Channel Channel Configuration Analog camera
38. are 4000 v2 0 Chapter 8 Remote Configuration You can remote configure the parameters of the device including recording schedule alarm schedule and etc Device Management gt Right click the device and select Remote Configuration Remote Parameters Configuration cof Device Informatio D Version Informati Channel Parameters Device Hame Embedded Het IVE P Display Settings l Bae P Video Parameters MISSES LI ee i Schedule Recordin P Motion Detection G Video Lost Enable video Ho P Video Tampering wp Video Mask Enable image P Text Overlay Device Type Hetwork Parameters a Hetworlk Settings Channel Humber JP PPPOE Settings JP DIES Settings i WTF Settings P HFS Settings P E mail Settings Alarm Output Ey Serial Port Settings Alarm Parameters fea Exception Parameters Recording Tes HUD Humber Alarm Input Device Serial DS G004AHL SO2200901 14ABHRO1081 1151 4C Account Management 33 AIM Transaction Parar Update Remotely HDD Format 4 m ml If the device is 9000 series DVR after clicking the Remote Configuration then you need to click key in the pop up menu and enter the configuration interface A Note Remote configuration of PCDVR via client software is not available right now 52 User Manual of Client Software 4000 v2 0 8 1 Remote Recording Configuration 8 1 1 Encoding Parameters Configuration Channel no Analog camera 1 Swit
39. are 4000 v2 0 o Help button click to show Help user manual and About Edition Info Lock button click to lock the interface mouse status shown as v re click to activate login window and input the correct password to unlock the interface Minimize the client software and right click the icon Ey on the taskbar then you ll see the popup menu including software hardware preview setup remote VOD local playback map log and exit to choose from Menu Area Seon SSS dic Enter preview interface If the decoding card is installed in PC then enter the software Preview or hardware decoding interface Device Area on SSS Preview Area Software Preview User Manual of Client Software 4000 v2 0 TS ion ton Advanced function PTZ Control Area ee e Control PTZ 3 Presets Configure and call the preset Configure and call the sequence i a Video Brightness contrast saturation hue and volume adjustment Alarm Info Area Display alarm time information and alarm sign The area size can be enlarged by dragging the upside of the area You can fix the area size by clicking icon mel and turns to Ml after it returns to AHD the area size will resume to original size User Manual of Client Software 4000 v2 0 Chapter 4 Device Management setup Before any operations user needs to add device and configure it Click Setup to enter the configure Device Ma
40. ated map of the hot region 92 User Manual of Client Software 4000 v2 0 Add Sub E map Add Hot Spot Right click the map in the edit mode select Delete All AGEL fate Hasiera Link to delete the all hot spot and region of the map Delete Map Delete ALL Link Properties 0 00 10 E E E 93 User Manual of Client Software 4000 v2 0 Chapter 11 Utilities 11 1 Software Configuration TnebestTueno 2 p Descriptions on Software Configuration Set the time of cycle play Configure the playback performance whether to drop B frame Set the instantaneity and fluency for preview Set the display ratio of preview window I means JPEG format E means BMP format Image resolution and quality can be configured I means enable it and user can set the time for 94 User Manual of Client Software 4000 v2 0 synchronization Set the path for remote downloading recorded files The saving path of captures from preview or playback The saving path for exporting the configuration file Advanced F Alarm Use Sound Card enter alarm configuration log maintenance ay 10 and other configurations Log Maintenance Alarm Log Saving Time One week y Operation Log Saving Time One week y System Log Saving Time One Week y Stamp Config T Start software with the system Y Automatic Login Click Advanced Configuration to wW Resume the state of Preview W Enable Alarm Sc
41. ble pecai E E Powod gt Camera C CameraD2 Camera03 CameraD4 Trigger Record Select the Enable check box then set the Pre record time and Post record time select the camera to record 66 User Manual of Client Software 4000 v2 0 Add Event Linkage ED Guard Time Record Relay Out ES PIZ Y Enable Alarm Duration jo 10 Device A Relay01 CIR Relay02 Firstly select the Enable check box secondly Fe Relay03 i D Relay04 set the Alarm Duration and select the relay port D Relay05 Q Age Relay06 ge Relay07 ge Relay08 Add Event Linkage ED Guard Time G Record 3 Relay Out PTZ Miscellaneous a eral A tOO PTZ Firstly select the Enable check box select preset Preset Secondly set the Calling Preset by clicking the Camera Camera02 Add button Preset Preset Cancel 67 User Manual of Client Software 4000 v2 0 Add Event Linkage ED Guard Time Q8 Record 3 Relay Out E PTZ Miscellaneous Miscellaneous Select the e Map check box to trigger e Map Audio and an audio file to trigger audio alarm and E mail to trigger Email In the setup of triggering Email if users want to send Email with snapshots users should select the Attach E Snapshot check box and the camera L OK Cancel Copy to camera O Cameralle O Camerata Press Copy to to copy Motion Detect parameters to any camera that you selected
42. ch to IP camera Select E Channel Parameters gt J Video Parameters Stream Type Main Stream to enter encoding parameters configuration interface Stream Type Video amp Audio v Resolution 4cIF 704 576 7 If the device is 9000 series click Switch to IP video Oualty High y Channel and select IP channel to configure the parameters of IP Bitrate Type Valable Max Bitrate 1792Kbps be Frame Rate Full Frame i Frame Type BBP I Frame Interval 100 Copy to All Channels camera 53 User Manual of Client Software 4000 v2 0 8 1 2 Schedule Recording Channel Farameters Schedule E di Select D or ee Nemmen Channel no analog camera 1 to enter configuration interface Switch to IP camera Enable recording by clicking the tick v Enable Recording Pre Record 5s Post Record 5s Expired Time 9 day Recording Time include recording time recording model and type Settings Redundant No we Audio Record Yes Copy to fal Channels Anore Recording Expired Redundant and Audio Record are only available for 9000 series DVR Redundant Redundant for this channel or not When redundant disk is available Recording Expired Storage life of recorded files in redundant disk expired data will be deleted Audio Record Recorded files include audio or not Recording Time Click Settings of the Recording Time to enter recording W
43. channels can be added to the short key area Select the channel from the list area and click key and move it to the short key area The type of channel name in the group area is as device name_channel name of the list area Select the device from the list area and click key to add all the channels of the device to the short key area Using key to delete the channel in the short key area 18 User Manual of Client Software 4000 v2 0 Chapter5 Preview After configuring the device double click the key to return to the preview interface Click the List and Group keys to switch between two modes S software Configuration Click key and then key and button to enter Advanced Configuration and enable Resume the state of Preview option to save current preview state including window division and preview channel for next login Start software with the system w Automatic Login i Resume the state of Preview Play windows are divided into 2x2 mode max support 64 window divisions IP Video Surveillance Preview Playbacky El Login Usert amp Group Y Software Preview 5 mib H 6101 md 9000test 69 852MF E Preview Panel Buttons Descriptions res Description Mes Description CB Mutisren A oo Previous Next page Resume cycling all the device Stop cycling all the device 19 User Manual of Client Software 4000 v2 0 Anore The window divi
44. device name and select Stream Media Server dl e Add Stream Media Server Input the IP ae 172 e 114 11 MN 554 address and Port default 554 of server Belong to Area center then press OK Anos If the channel is being previewed or recorded the settings will become effective after preview and recording restarted 15 User Manual of Client Software 4000 v2 0 center e B 1728 111411 ATM DVR eS 3000 Double click the server to modify the parameters Right click the server and select Delete Nod to delete server A Note No more than one stream media server can be added to one area however of which stream media server can be added in sub area 4 1 5 Import Export Configuration Files 0 3 mib H 6101 Save Configuration File up Click Save Configuration File to export configuration sel Configuration File l Remote Configuration file and Set Configuration File to import configuration file Delete Nod T E Add Area H d Add Stream Media Server Right click area name and select Save All Configuration Add Device File to export all configuration files and Set All Save All Configuration Files Configuration File to import all configuration files Set All Configuration Files Delete Nod 4 2 Group Configuration Click the Group button to enter group area management window 4 2 1 Group There is the defa
45. e and all the channels of the er ATM DYA_ Channel 03 2 3000_Channel 03 2 3000 Channel 12 2 3000 Channel 13 2 3000 Channel 14 group begin to cycle in the selected window division from the t 1 channel 07 20 2009 Mon 90 06 18 Drag the node of the device to the window and then all the channels of this device begin to cycle Drag the node of the group to the window and then all NO VIDEO the channels of this group begin to cycle Camera 04 5 2 4 Pause Cycle If the current window is in the device group cycle mode Pause cycle device right click the cycling window click Pause cycle device or Open Voice Stop cycle group to pause cycling and remain the current mae Capture Start Recording Image Stop Play Click Pause all cycle devices key to pause all the cycling channels 5 2 5 Resume Cycling 07 20 2009 Mon 90 07 05 Resume cycle device restart cycling Open Voice If the current window is in the device group cycle mode right click the paused window click Resume cycle device to Capture Start Recording Stop Play Camera 06 Click Resume all cycle devices key to restart all the paused channels 23 User Manual of Client Software 4000 v2 0 5 3 Preview Control Full Screen When previewing click key to preview in full screen to exit click O key Enlarge When in the multi screen preview mode double click the selected image to e
46. eekday y o E A a 4 lt l E T S Ead a o schedule configuration interface Schedule Recor Y Select Weekday as some day of the week or the whole week for recording time Click Schedule Recor y for the recording type The All Day Record or 8 Segments can be selected as well Anore The time of each segment can not be overlapped Mal lo il a a i i a Mala Lf lala a Copy to Whole Week v 8 1 3 Motion Detection Recording Click 4 Motion Detection to enter motion detection recording interface A Note If the device is 9000 series click Switch to IP Channel and select IP channel to configure the parameters of IP camera 54 User Manual of Client Software 4000 v2 0 1 step Select channel number for motion Analog Channel 1 detection gm step Enable motion detection to activate Setting settings Area Fortify Time and Linkage settings Settings settings Area Settings ar step Set the motion detection area and sensitivity The sensitivity 1 and 6 are the lowest and the highest 222S E JANNEN level aA Enable Start Draw and select the detection area by using mouse Fortify Time qe step Set the detection time Fortify Time can be one day or the whole week and 8 segments for one day fla a fa fil lala da fa fil loft a da da A lla a ffi a l Whole Week e 55 User Manual of
47. erface 45 User Manual of Client Software 4000 v2 0 IP Video Surveillance Preview Playback ET 1 Login User1 A mb Remote VOD a 6101 Window 01 Window 02 9000test a 852MF E 639 IPD Window 03 File Type All Synchronous Playback 07 21 2009 Seon O em 7 2 1 1 Remote VOD Query 1 step Select the playback channel and window ga step Select recorded files type and query time H 4 03 12 2009 gt Alarm Handle Alarm Motion Detection Alarm amp Motion Detection Manual Record 3 step Add information of card number For ATM DVR enable Query by Card No and input the overlaid card number to search Other device can skip this step step Click key to search the matched recorded files if there is then it will shows in the time axis area 46 User Manual of Client Software 4000 v2 0 Select one channel then drag into playback window If there is recorded file in this day it will playback it from the very beginning of this day A If you enable synchronous playback then the 4 windows will playback synchronously If the start time of the 4 windows is not same the most ahead window will wait for other windows until they reach the same time point 7 2 1 2 Playback Control When playback has succeeded the play window will show as below IP Video Surveillance gt Preview Playback E Log LoginUsert Mh a mib Remote VOD a 6101 Window 01 9000test
48. erver IP IP server port 8 3 2 PPPoE Select Network Parameters gt AB EPPDE Settings Enable PPPOE DDNS IP User name l Password make the parameters become effective Password verify Enable PPPoE by ticking input the user name and password then save the changes and reboot the device to If succeed to dial the current IP address will be displayed in the blank DDNS IP 78 User Manual of Client Software 4000 v2 0 8 3 3 DDNS Adopting DDNS function can solve the problems caused by dynamic IP Click Sa Network Parameters gt ia IIHS Settings Enable DDNS If the IPServerlP is selected as protocol then input the address where the IP server is running If the Dyndns is selected as protocol Server Name Input the IP address of the server such as members dyndns org T Domain the domain name that user applied for the fiee device such as test dynlia com freee O User name password and verify the account information that user registered on the Dyndns website If the Peanut Hull is selected as protocol Input the user name and password applied on the Peanut Hull website to visit the device by the applied domain name 8 3 4 NTP Adopting NTP function can enable client software to synchronize the time and data of the device regularly 79 User Manual of Client Software 4000 v2 0 Select ig Network Farameters gt MARERE Tick I
49. ery Local Recording Files Query Local Recording Files Query Local Recording Files Query Start Recording Local Recording Files Query Local Recording Files Query Local Recording Files Query Stop Recording Local Recording Files Query 98 De bh hb hb bb lb bl hb b dd dd o d d dd bd dd dd db d d dd dd dd dl ob center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center id dd dd LL dodo ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DYVR ATM DYR ATM DYR jos 2009 3 18 23 59 59 center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center center er ATM DVR ATM DWR ATM DVR ATM DVR ATM DVR ATM DWR ATM DVR ATM DVR ATM DVR ATM DVR ATM DYR ATM DVR ATM DVR ATM DWR ATM DVR ATM DVR ATM DVR ATM DWR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DVR ATM DWR ATM DVR ATM DVR ATM DWR ATM DYR ATM DVR
50. g of this day 7 2 2 2 Playback Control When playback has succeeded the play window will show as below IP Video Surveillance Preview Playback WET LoginUser1 amp Y mib Local Playback H 6101 Window01 IPD_Channel 01 Window02 852MF E_Channel 01 9000test i 3 Channel 01 3 Channel 02 3 Channel 03 3 Channel 04 3 Channel 05 3 Channel 06 3 Channel 07 3 Channel 08 3 Channel 09 3 Channel 10 2 a Cam IPCamera 01 2 ei Window04 9000test_Channel 01 3 Channel 15 3 Channel 16 8 IPChannel 01 3 IPChannel 02 a g 852MF E 3 Channel 01 IPD 7 Channel 01 File Type All Enable Synchronization 07 21 2009 MON TUE WED THI 1 IPCanera 01 Fo Descriptions on playback buttons ec en 50 User Manual of Client Software 4000 v2 0 DA perros sone E O O G w a se remtosegnins PP Play Speed Adjust Bar 5 Image capture is succe You can also get the remote capture by clicking a Wee button and you will see the pop up message Click the picture to open the capture and click the path to open the capture folder C Picture 9000test_IPCha A ote In the single frame playback mode every time you click button the recorded files will play forward by one frame Only one window audio can be opened at the same time when in VOD mode If the audio of next window opens then the audio of previous window will be closed 51 User Manual of Client Softw
51. gement mode in the preview interface ER Pop up remote configuration menu V2 00 02 New Features Preview Add ESC button to exit full screen of multi channel Add preview state resume function Add device remote control panel I 2 3 4 Add Start Recording amp Stop Recording in the right click menu when preview 5 Add fortify state resume function 6 Add 1003 1002KI USB joystick control PTZ function 7 Display thumbnail and save path of the capture click thumbnail to open capture save path to open capture folder Playback 8 Add NAS remote VOD function when device is offline Succeed to playback files on NAS before 9 Add click time bar to fix the position of all playback windows 10 Add pause hint in synchronous playback 11 Unified time bar and play control between remote VOD and local playback Configuration 12 Add startup with windows function 13 Add wizard of add device 14 Add default group 15 Refine buttons of PTZ video parameters presets and sequence 16 Add sequence configuration buttons 17 Refine local and NVR recording menu 18 Add motion detection recording in NVR configuration 103 User Manual of Client Software 4000 v2 0 19 Add PCDVR configuration menu User 20 Input the password when admin change the user account 21 Change Super User as Administrator 22 Add function buttons of Add User Delete User amp Modify User
52. hannelSs ooccccccccoocccnnnononononononanononononanonnnos 22 5 2422 Cycle Play Of Group Channels inen 22 5 2 3 Cycle Play of Device GroUP iii 22 Bid AP AUSS AA A A lig laieinnce A 23 Dds RESUME CY CIID aaa 23 53 Preview CON Oir a N 24 5A VOICE CONTO lara aaa 25 SI RECOlCINE er Ca DUNS iii die 25 Bo OC OF NI tienen cesta RR 25 User Manual of Client Software 4000 v2 0 9A sass aan E tic tec iawn earn aa ne es aes Sa a vec aan N A 26 5 6 Haraware DeCode aniren aan N een te ee AG A 26 5 6 1 Hardware Decode ContisuratioOn da 26 5 6 1 1 Hardware Decode Mode Configuration occccccconoccnnnnnnnancnnnnnnanonnnss 27 5 6 1 2 Hardware Decode Output Window Configuration ccccccssseeeeeees 28 5 6 2 Hardware Decode Preview cine 29 5 6 3 Secondary Output of Hardware Decode ccccccnccnccnnccnncnnccnnonanocononanonnnnanonnnos 30 SE OOT A RO 31 DL VOICE Tal Se BOTON 31 Dz Alarm Output CONTO 32 IS DEVIN 32 557 4 Remote Control Panel tii ca 33 Chapter 6 PTZ CONTO ad 34 b 1 RS 485 Parameters CONE 34 O2 PIZ COMTO OPC TC E tits haieana sd dod een mene 34 012 E Direction CONTO tl 34 22 PA IZ a N AN 35 DAPO SOT i en teeta a e Td 35 524 UU cia 36 6 3 VIGEO Parameters CONTISULATION usn ena aai E N Tit 37 6A Keyboard ana JOVstCk CONT Olarten a aia 38 6 4 1 DS 1002KI DS 1003KI keyboard control PTZ cccoooocccnncccooccnnnnncnancnnnnnnnnoos 38 5 4 2 JO VSHEK CONTO Lara 39 Chapter 7 Recordin amp Playback mercc
53. ical inaccuracies or typographical errors in the manual The contents including description of products and program will be updated without notice 1 2 Computer Disposition Request Operating System Microsoft Windows 2000 or versions above CPU Intel Pentium IV 2 4 GHz or models above RAM 1G or above Display 1024x768 resolution or above 1 3 Convention Conventions as follows in this manual DVR DVS IP Camera and IP Dome are all referred to as device Click refers to left click mouse Double click refers to double left click mouse User Manual of Client Software 4000 v2 0 Chapter 2 Install Uninstall 2 1 Install the Software Double click the software and you will see the wizard shown as below Client Software 4000 v2 0 Welcome to the InstallShield Wizard for Client Software The InstallShield Wizard wall install Client Software on your computer To continue click Mert Click Next to continue and input the user information software installed location according to the hints After that a SADP installation wizard will pop up click Next to start to install WinPcap shown as below If it is already installed the installation can be canceled User Manual of Client Software 4000 v2 0 S WinPcap 4 0 2 Setup W WinPcap 4 0 2 Installer JG 1i cap Welcome to the WwinPcap 4 0 2 Installation Wizard This product is brought to you by CACE TECHNOLOGIES Packet Capturing and Network A
54. ion on this BNC For example if we select the first window 01 01 then divide into 4 windows the 4 windows will be named as 01 01 01 02 01 03 01 04 28 User Manual of Client Software 4000 v2 0 Tick the check box E Dl on each window to set the channel decode D1 resolution stream A Note If the default mode is selected then each decoding channel outputs one single image and division mode is invalid 5 6 2 Hardware Decode Preview P Vidco Surveliance After configuration click Preview key and select Hardware Preview to enter the hardware decode interface Click then start to decode at the moment preview windows layout will switch to the layout which set in output window panel The window exceed maximum decode channel won t be displayed 29 User Manual of Client Software 4000 v2 0 The basic operations of hardware preview are the same with software decode please refer to sections 5 1 5 5 for more details 5 6 3 Secondary Output of Hardware Decode MD card can output the decoded images twice Take 4002MD card for example one 4002MD card can decode 4 channels CIF images assume they are channel01 channel02 channel03 and channel04 if one decoding channel is set as 4 divisions and separately display channel01 channel02 channel03 and channel04 then the other decoding channel can only support one division and select one decoding channel to output the image
55. ion can be available 5 6 1 Hardware Decode Configuration H ar d bi cies 5 eco d e Click key and then IA on the right to enter the configuration interface 26 User Manual of Client Software 4000 v2 0 IP Video Surveillance Preview Playbackr Map LegnUser A f Video Duput Standard Pa lv EN Decode Mode Device Management Default Configuration w Software Configuration D Recording Feature r Alarm Link User Management Pr ot Hardware Decode The area descriptions are as follows A cion PA ion O Configuration Area 0 Decoding Card Info Area Output Window Area Window Division Mode Select Area O Configuration Area 2 options including Video Output Standard amp Decode Mode 2 Decoding Card Info Area Show the information of the decoding cards and channels Output Window Area Configure the output mode of decoding channels O Window Division Mode Select Area Select window division mode 5 6 1 1 Hardware Decode Mode Configuration The decoding card installed in the PC can be recognized and initialized automatically as client software starts up and the information will be displayed in the decoding card info area The icon means decoding card and the sub nodes show the information of decoding channels The hardware decoding modes of MD card including default preview on amp TV wall on preview off amp TV wall on Hardware Descriptions Decode Mode E
56. k box to set the PTZ parameters Protocol select a protocol Address Input the PTZ address Baud rate select the baud rate Parity select Parity check Data bits select the data bits Stop bits select the stop bits Flow ctrl select the flow control mode 70 User Manual of Client Software 4000 v2 0 Remote Contig Camera Contig PTZ Contig Display J Compression Record Schedule Select Camera Cameral 2 Motion Detect Video Lost JP Privacy Area l mp PTZ Config Ea Id Device rotoca HIKVISION J Alarm Sensor S ooo Baudrate 9600 Parity No Parity T Databits kW Enable Stopbits Flowrctrl No FlowCtrl T Note Click this to copy configure to any channel Copy to camera C Cameralt O Cameralle O Camerata _ CameraD Press Copy to to copy PTZ Configure parameters to any camera that you selected Seectal eaa Juno 8 1 6 2 IO Device IO Device contains only 1 part Alarm Sensor IO Name Select an IO Device IO Port Select a Sensor of the current lO Device If Users want to set the event linkage of Alarm Sensor users should select the Enable check box and press Setting The event linkage of Alarm Sensor is the same as Motion Detect 71 User Manual of Client Software 4000 v2 0 Remote Config P Display EE Camera Contig P Compression SP Record Schedule SP Motion Detect SP Video Lost F Privacy Area 5 5 IO Device P Alarm Senso
57. le Attachment i 0 14 A Note Make sure that the device supports email function and NAS server allocated the storage space correctly DS 9000 device does not support email function 80 User name test Password K Password probe V Server Authentication Sender Receiver Details __ User Name Email Address Sender sender sender cba com Receiverl recipient recipient abe com Receiver Receiver3 _ Delete elete Interval 2s v V Attachment SMTP sm tp abe com POPS pop3 abe com User Manual of Client Software 4000 v2 0 8 4 Channel Configuration 8 4 1 Channel Display Settings Analog Channel 1 Select E Channel Farameters gt P Display Settings You can configure channel name OSD and related parameters here All Channels v Copy 8 4 2 Video Mask 1 step Select channel number and enable video mask lie M Select my Channel Farameters gt P Video Mask meeen A Note If the device is 9000 series click Switch to Settings digital to choose IP channel and configure the parameters Settings 81 User Manual of Client Software 4000 v2 0 Area Settings nd 2 step Set the mask area Click Settings to enter area set menu Enable Start Draw lie M select the mask area by clicking and dragging the mouse M Start Draw Clear All Ce cuca 8 4 3 Text Overlay You can add characters on the screen of the channel Select
58. ll Day Record or 8 Segments can be selected as 3 well Note The time of each segment can not be a x m overlapped a 4 4 j Whole Week bad Copy 4 step Set linkage for video loss Click Settings in the Linkage menu 75 User Manual of Client Software 4000 v2 0 8 2 4 Video Tampering Analog camera 1 v i step Select the channel number for video tampering Select E Channel Parameters gt P Video Ante If the device is 9000 series DVR you can click settings Switch to digital channel to configure the video tampering of IP channel _ setinas d e 2 step Enable Video Tampering Alarm to activate settings of Setting Areas Fortify Time and Linkage Area Settings z FHE gr step Set the video tampering area and sensitivity The sensitivity can be divided into three levels Low Medium and High Enable Start Draw and select the detection area by using mouse 76 User Manual of Client Software 4000 v2 0 Fortify Time qe step Set the fortify time for video tampering Click Settings in Fortify Time menu Select Weekday as some day of the week or the whole week for the fortify time The All Day Record or 8 Segments can be selected as well Note The time of each segment can not be overlapped ld fat fa fal fal i aff fa A ia Ga da A it lf fa ff d a
59. nagement mode and then click to manage the device IP Video Surveillance Preview Playbacky Login User1 A Right click to choose the add area add stream media add device mib a 6101 Device Management Gy 9000test 9 852MF E S ad Software Contiquration eo Recording Feature Alarm Link User Management cion IA ein 4 1 List Configuration The list area is empty when the client software runs for the first time right click in this area you can choose to add area Add Area Area Information Add Area Area Name Upper rea Name 10 User Manual of Client Software 4000 v2 0 Input a name in the blank of Area Name if there is no upper area the blank of Upper Area Name is not enabled After area added right click the area name and the sub menu will pop up shown as figure below Select Add Area you can add sub area select Delete Nod you can delete the area E Jna mg Add Area cE amp Add Stream Media Server save All Configuration Files sel All Configuration Files Delete Nod A Note Enter Space TAB is invalid in the area name which cannot be null and should not contain the following characters including and Ante User can max add 50 areas here AN Note When the option Delete Nod selected the sub areas stream media servers and devices under the root of this area will be deleted as well Before that you need to stop pre
60. nalysis Solutions Note SADP is used as the on line device finder this function is unavailable if the WinPcap is not installed 2 2 Uninstall Software Enter start menu select All programs gt Client Software 4000 v2 0 gt Uninstall Client Software and the dialog box shown as below will pop up Client Software InstallShield Wizard Do you want to completely remove the selected application and all of its Features Click Yes and start to uninstall the software the un installation will finish after the computer restarted User Manual of Client Software 4000 v2 0 Chapter 3 Basic Operations 3 1 Run amp Login Path Start gt All Programs gt Client software 4000 v2 0 gt Client software 4000 v2 0 3 1 1 Used for the first time User needs to register an administrator if the client software is used for the first time shown as below Register administator Please create an administator for login Username Password Verification Input the user name and password and click Register then user can login as the administrator A Note Enter Space TAB is invalid in the user name and password The password cannot be null and should not contain the following characters including and Password should not be less than six and does not support the copy and paste 3 1 2 Add Device Wizard After registered super user and logged
61. ne Device Channel No DNS Address Private domain If the device is configured with the address of IP Server that runs normally then the connected device can be resolved by IP Server and client software can get the dynamic IP address from IP Server by server name or serial number Modify Device information l f t a t d A Device Information you select private domain please aaa SS IET DT m input the correct device serial number and Device IP Port 8000 j Username Password a IP address of IP server in the DNS Address Channel No Multicast 0 0 0 0 blank DNS Address Belona to area mlb Device serial DS2CD852MF E0020080926BCWR200091083WC Online Device Right click to choose the add area add stream media add device Click OK to finish adding device a mib Right click menu is available double H 6101 i see D Channel 01 click the node can modify the device 4 9000test parameters d J852MF E 5 Channel 01 A Note 50 devices can be added here at most 12 User Manual of Client Software 4000 v2 0 4 1 2 Channel Configuration Click Get Channel Name to get the Right click to choose the add area add stream media add device a mib names of all channels E E 6101 mess Get Channel Name Save Configuration File Set Configuration File Remote Configuration Delete Nod Y Tips Main stream is for device encoding sub stream is for network transmission Modify Ch
62. ng ra 3 gt Select the Date Time check box select a format and press Setting to enter the setup window Drag and drop the icon OSSASI22 07I2009 to change its position Copy to camera Camerall2 Cameralls Press Copy to to copy Display parameters but containing no Camera Name to any camera that you selected Select All Clear All 3 Recode Schedule Select Camera Select a camera Select the Schedule check box to set Recode Schedule Record Cycle in day The recordings reserving time 63 Cancel User Manual of Client Software 4000 v2 0 Camera Contig P Display P Compression Motion Detect Video Lost P Privacy Area JP PTZ Contig 1 53 10 Device P Alarm Sensor Copy to Reboot Server Press Setting to set the time of record Record in Period r Day select one day Rec Mode support E 0 Alam Motion Record All Day and Record in Period if you select _ Jos Record All Day the record period will not need to be configured pE MH firea z Otherwise the record period needs to be configured Period x section time of recording It can be Wednesday Record in Period set in Record in Period mode only Copy to copy Ee the parameters to other days In Rec mode if i Jo po Seneca Record all day is enabled the record mode is f 3 A Schedule by default if Record in Period is E enabled the record m
63. nlarge it double click again to resume Main Sub Stream Available for hardware preview a y mlb H a 6101 Oni iitac Right click device name and select All Main Streams or 2 ar Device Synchronization All Sub Streams to change the device stream type Open intercom channel 1 Open intercom channel 2 Device Status Alarm Output Control All Main Streams All Sub Streams Remote Control Panel E 3 mib re 6101 9000test El a 252MF al Right click channel name and select All Main Streams A or All Sub Streams to change the channel stream type 3 T Main Stream sub Stream Y Tips Main stream is for recording sub stream is for network transmission when bandwidth is low The stream will take effect after re preview the device or channels 24 User Manual of Client Software 4000 v2 0 5 4 Voice Control 07 20 2009 Mon 00 08 50 Right click the selected window select Open Voice to enable audio preview right click again and select Close Pause cycle device Open Voice Voice to disable audio preview Capture Start Recording Stop Play Camera 07 A Note The software only can open voice of one window at the same time If the voice of the next window is opened then the voice of the previous will be closed automatically 5 5 Recording amp Capture Recording and capture is only available in the live view mode A Note If the channel is
64. ode can be Schedule El on Alarm Motion and Schedule record 64 User Manual of Client Software 4000 v2 0 O Camerall O Camerall3 Press Copy to to copy Recode Schedule parameters to any camera that you selected 4 Motion Detect Select Camera Select a camera Remote Config H Ea Camera Config P Display JP Compression A P Motion Detect P Video Lost oo JP Privacy rea ee MP PTZ Contig 10 Device P Alarm Sensor Setting Setting Reboot Server a Motion Detect Select the Enable check box and press Setting to set areas 65 User Manual of Client Software 4000 v2 0 Move Detect Area Setting z l ba P I f Press ep to add motion detection area E to delete the selected area Ei to delete all areas and to set the whole image as motion detection area Sensitivity Sensitivity of motion detection which has 7 grades 0 6 Motion value The percent of motion areas in Ssmi gt o a amp amp selected area it is variable from 1 to 100 Hite 5 value b Event Linkage Add Event Linkage B Guard Time qf Record Relay Out PTZ Miscellaneous Guard Time Week Day wed gt Me ied OS enone jp Faid a E Fior jp H 2 Guard Time Users can configure guard time as all day or 4 periods Copy to fan Day Add Event Linkage Guard Time Record Y Relay Out E PTZ Miscellaneous M Ena
65. ons in total then define the 12 button as Switch button Different models of USB joystick have different buttons which decide the number of callable presets 39 User Manual of Client Software 4000 v2 0 Chapter 7 Recording amp Playback 7 1 Recording 7 1 1 Local Recording Recording Feature Click tab page to enter record setting interface wW Schedule Recording Monday Empty Mode Tuesday Empty Mode Wednesday Empty Mode Thursday Empty Mode Friday Empty Mode Saturday Empty Mode Sunday Empty Mode Apply to whole week Copy sefiingio Please select chan Please select disk group Select All lv Cycle Record Record File Size 541 schedule 40 User Manual of Client Software 4000 v2 0 Set Schedule Recording Table Mode Name Empty Mode 8 Whole Day Mode 8 Recording Mode Start Time End time 8 Recording Mode2 2 Recording Mode3 00 00 00 00 00 00 8 Recording Mode4 o E Recording Mode5 00 00 00 8 Recording Mode6 By Recording Mode7 00 00 00 8 Recording Modes 8 Recording Mode9 8 Recording Mode10 You can choose Whole Day Recording Mode or you can define the recording mode for your own demands Set Schedule Recording Table Empty Mode Mode 01 8 Whole Day Mode Select Recording Mode then you can configure the Recording Mode1 Start Time 8 Recording Mode2 schedule mode 8 Recording Mode3 Time Period 1 00 00 00 lt
66. ord Schedule Select Camera Camera Motion Detect J Video Lost Decode Type Main Stream el JP Privacy Area JP PTZ Contig Stream type Video Only x E lO Device oo JP Alarm Sensor Resolution QCIF a Image Quality Level 3 hg Bitrate Type Variable Mas Bitrate 32k bps h Frame Rate GOP Structure Key Frame Interval Copy to Note Click this to copy configure to any channel 8 1 6 1 Camera Configuration Camera Configuration contains 7 parts Compression Display Recode Schedule Motion Detect Video Lost Privacy Area and PTZ Configuration 1 Compression Select Camera Select a camera Decode Type The type of decode Decode Type contains tows types Main Stream and Sub Stream Main Stream Main Stream parameters contain Stream Type Resolution Image Quality Bit rate Type Max Bit rate Frame Rate GOP Structure Key Frame Interval b Stream Type setup the stream type Resolution setup the resolution It can setup the resolution dynamically while recording Image Quality setup the image quality Bit rate Type setup the bit rate type VBR variable bit rate CBR constant bit rate Max Bit rate the maximum bit rate Frame Rate setup the frame rate GOP Structure setup frame group mode Key Frame Interval setup the interval of frame This parameter will affect the image quality Sub Stream Sub Stream contain Image Quality Bit rate Type Max Bit ra
67. password guest has no ii rights on user management User Privileges Descriptions Add super user and normal user Modify the levels of all users and privileges of normal Modify user users Operation Privilege With all privileges by default cannot be changed No local configuration privileges needs to set the Operation Privilege privileges first A Note The administrator can be modified in the login dialog box instead of the user management The password cannot be null and should be more than 6 characters 11 3 2 User Rights Distribution Select a guest and click the rights tree on the right to distribute the rights for user 101 User Manual of Client Software 4000 v2 0 EEL S E E E ey S PS LS L L LS L Note The operations are available for the guest only when the corresponding rights are distributed 102 User Manual of Client Software 4000 v2 0 Appendix 1 V2 00 01 New Features User friendly GUI 32 amp 64 divisions are added to window division options User defined name of alarm out Preview window information can be memorized when exiting the client software Support remote playback NAS VOD VOD function intelligent analysis and synchronous playback as well Dual VGA display in remote VOD interface Add full screen of multi channel and control in local playback interface Max support 16 NVR server for centralized storage On A A A IN RAS Modified double click enlar
68. r Device Copy to camera O Cameralle O Camerata Press Copy to to copy Alarm Sensor parameters to any IO port of the current IO Device that you selected 8 2 Alarm You can configure motion detection alarm signal level alarm video loss alarm and other alarm and linkage through client software 8 2 1 Motion Detection Alarm 1 step The same with the 1 step of 8 1 3 Motion Detection Recording nd 2 step The same with the vd step of 8 1 3 Motion Detection Recording 3 step The same with the 3 step of 8 1 3 Motion Detection Recording 72 User Manual of Client Software 4000 v2 0 q step The same with the q step of 8 1 3 Motion Detection Recording Linkage 5 step Set the alarm linkage for motion detection and W Alarm Trigger Mode MA Trigger Recording select alarm output channel Y Warning on Monitor Audio Warning Upload to Center Email Linkage Trigger Alarm Output Analog Digital Output Chan O output Chan Select All Output Channel 2 Alarm Linkages Description When the alarm signal is detected the image of corresponding channel will pop Warning on Monitor out as single screen Audio Warning Alarm triggers buzzer Upload to Center Upload the alarm signal to the center such as client software When the alarm signal is detected the client software will send the email to the E mail Linkage designated mailbox Trigger alarm output of the device if
69. reen E map Two Screens Displ Descriptions on Advanced Configuration W means audible alarm outputs from sound card Set the time length of the alarm delay The port used for the device to upload alarm actively which needs to the same with device configuration W means enable it Serial number for keyboard control After enable inspection if the device is offline then the alarm light will twinkle and the detailed information will be listed if the device is on line the alarm light stop twinkling and the on line information will be listed as well 95 User Manual of Client Software 4000 v2 0 09 07 21 15 16 04 Device 9000test is offline 11 2 Log Management Click to enter the manage interface 11 2 1 Log Query 1 step Select the area device or channel you want to search from 2009 3 18 00 00 00 nd 2 step Select type and subtype for the log you want to search for 96 User Manual of Client Software 4000 v2 0 mr center 68 ATM DVR 3 8000 3 9000 Dperation Log vl Operation Loa Alarm Log System Log Remote Log 2009 348 v 235959 e H System Log Record information on login logout and software configuration Operation Log Record information on the software operation Alarm Log Record information on the alarm and it needs to be linked as alarm link type Remote Log Record information on operations of the remote device a step Select the star
70. rtify All or Disarm All for the whole devices of the device All Main Streams All Sub Streams All Synchronization LAN Broadcast After the device or the area fortified the alarm linkage will become effective when there is an alarm of the device You need to re fortify when client software restarts 87 User Manual of Client Software 4000 v2 0 Chapter 10 E Map Click eo key to show the e map window IP Video Surveillance Preview Playbackr WET Log Setup Help Login User 1 2 Ci E 2 2 O A Toolbar Buttons Descriptions e oeeo B ore o B Enable Disable Map Edit A Enter Exit Full Screen Zoom Adjustment o H Upper Level 10 1 Add Map 1 step Click L4 button to enter map edit mode the cursor will become as SS nd 2 step Right click the black area and select Add Map or click button to display Map Info Area and right click the area and select Add Map then the add map window will pop up 88 User Manual of Client Software 4000 v2 0 E map JA lene NewMap 3 step Add the map Click Browse to search the image file on the local PC C Documents and Settings Libo My Documents My Pic Click OK after renaming the file to finish A Note Supported file formats are BMP amp JPEG ES Add Sub E map q step Add sub map right click the image name in the map info area or the image itself and the sub menu will pop up Select
71. sion and channel sequence can be remembered by the Client Software as exited and will play automatically after login next time 5 1 Non cycle Preview 5 1 1 Play by Node Double click the device name or drag it to the play window to preview not enable cycle preview Double click the channel name to preview the corresponding cameras Double click the device name to preview the corresponding cameras of the device in the current window divisions Double click the group name to preview the corresponding cameras of the group in the current window divisions You can also preview them by dragging them to the play windows The play window shows as the figure on the right 5 1 2 Short Key Preview y E Channel 01 E Channel 02 E Channel 03 j Channel 04 y Channel 01 i Channel 02 i Channel 03 i Channel 04 Groupi 2 ATM DVR_ 192 0 7 234 4_01 7 ATM DWA_Channel 03 7 9000_Channel 03 7 9000_Channel 01 7 9000_Channel 02 TJ 20039 10 20 1 NO VIDEO 1192 0 7 23114_01 If the short key has been configured then press Play key of the preview interface to view all the corresponding channels in the short key area in the current window divisions Find more 0 4 3 Short Key Configuration 5 1 3 Stop Playing There are 3 ways to stop live preview 20 User Manual of Client Software 4000 v2 0 center The play icon iB double click it to stop previewing A1M DWE 62 8 1
72. ss joo 00 00 00 00 00 eg d0 40 30 41 03 a0 and then only the PC with the same IP address or physical address can visit the device through network Click Modify to change the user name and password click tf Delete to delete the user Bieri IP Address m7 2 admin User Status means privilege granted status E means gi 0000 privilege not granted If the privileges are related to channels then status lt gt means granting the privileges of all channels status E means Ce E 4 Local PTZ Control 7 granting no privileges of all channels eee ue El Local Playback Click to unfold the channels and set the privilege for each rs O ia Local Log Query channel If only part of channels have operating privileges the A nnii O Local Reading Parameters F status will be m Local Channel Management F Local backup Local Shutdown Reboot A Note Please refer to the user manual of the device for A E Y Mi lt Ui gt the detailed descriptions on privileges 83 User Manual of Client Software 4000 v2 0 8 6 Others Remote Upgrade Click Browse to search the local upgrade file click Upgrade to start upgrade remotely 00 o HDD 09 3980 E Iw HDD Format Click E HDD Format A Note Please backup the data before formatting hard disk 84 User Manual of Client Software 4000 v2 0 Chapter 9 Alarm Linkage According to the various alarm sign
73. st Signal lost Signal lost Signal lost Signal lost Normal Normal Normal Normal Normal Normal Normal Normal ocooooooo lO oooooooo a Y mlb H a 6104 Fortity Device Synchronization Open intercom channel 1 Open intercom channel 2 Device Status Alarm Output Control we All Main Streams All Sub Streams Remote Contral Panel tos Jl uniock acm E Play Auto mer e JE hes Play le Cea Jr Jue fo a ia Fo Es Zoom Chan State ety Ge Ge te Ge Ge Se te te te te Se te Se oe 33 User Manual of Client Software 4000 v2 0 Chapter 6 PTZ Control 6 1 RS 485 Parameters Configuration Before PRTZ operations please make sure that RS 485 parameters has been correctly configured by client software Remote Parameters Configuration Click Configure and enter the 4 Device Informatio Device Information corresponding interface HP Version Informati Sj Channel Parameters Device Name Embedded Net DVR Right click the device name and select cece aca Device No 88 Schedule Recordin Recording Remote Configuration from the sub menu Motion Detection Video Lost Enable video Click H Serial Port Settings aes ts ine Text Overlay Device Type i i Network Parameters to unfold the options shown as figure on the Pe A NE PPPOE Settings right DDNS Settings A ld HIP Settings Alarm Input fj Serial Port Settings A R5232 Settings Alarm Outp
74. t time and end time for the log query click button and the logs match condition will show in the list Operation Log 2009 03 02 2009 03 03 2009 03 04 2009 03 05 2009 03 06 2009 03 07 2009 03 08 2009 03 09 2009 03 10 2009 03 11 2009 03 12 2009 03 13 2009 03 14 2009 03 15 2009 03 16 2009 03 17 2009 03 18 Double click the date in the list on the left the logs of that day will show in the information list Dperation Log Ka 2009 03 11 09 37 40 2009 03 11 09 37 40 2009 03 11 09 37 40 2009 03 11 09 37 40 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 16 22 37 2009 03 12 16 22 42 2009 03 12 16 22 44 2009 03 12 16 22 49 2009 03 12 16 22 52 2009 03 12 16 22 57 2009 03 12 16 23 08 2009 03 12 16 23 23 2009 03 12 16 23 35 2009 03 12 16 23 36 2009 03 12 16 23 43 2009 03 12 16 23 46 2009 03 12 16 23 50 2009 03 12 16 23 52 2009 03 12 16 24 03 2009 03 12 16 24 05 2009 03 12 16 24 23 2009 03 12 16 24 24 2009 03 12 16 24 39 2009 03 12 16 40 58 2009 03 12 16 41 03 2009 03 12 16 41 08 2009 03 12 16 41 15 2009 03 12 16 41 21 2009 3 2 00 00 00 97 Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Start Recording Stop Recording Local Recording
75. te Frame Rate Key Frame Interval shown as figure below 60 User Manual of Client Software 4000 v2 0 Remote Contig Camera Contig FP Display JP Compression iP Record Schedule Camera P Motion Detect Video Lost P Privacy Area GP PTZ Contig Video Only El fa IO Device wo JP Alarm Sensor QCIF Level 3 Warnable 32K bps Pu Copy to camera Camera 0 Camerale Cameras Press Copy to to copy Compression parameters to Camerata any camera that you selected SelectAll Clear All 2 Display Display setup contains Camera Name and Date Time setup 61 User Manual of Client Software 4000 v2 0 Remote Contig Display 4 Record Schedule Select Camera Camera Moton Detect Video Lost Privacy Area i JP PTZ Config WwW Camer Name Seting G E 10 Device wP Alarm Sensor Camera Name Camera01 W Date Time Format 08 51 46 22 07 2009 Note Click this to copy configure to any Bape channel Select Camera Select a camera a Camera Name setup Name Position Setting E 3 F ar Setting the camera name and its position Select the Camera Name check box input the name directly and press Setting to enter the setup window Drag and drop the icon Camera01 to change its position j Cancel b Date Time setup Setting the Date Time format and position 62 User Manual of Client Software 4000 v2 0 Date Time Position Setti
76. the device is 9000 series triggering alarm Trigger Alarm Output output of IP channel can be selected as well 8 2 2 Signal Level Alarm i step The same with the ii step of 8 1 4 Alarm Recording 7 step The same with the a step of 8 1 4 Alarm Recording 3 step The same with the 3 step of 8 1 4 Alarm Recording q step The same with the q step of 8 1 4 Alarm Recording 73 User Manual of Client Software 4000 v2 0 gn step Set the alarm linkage for signal level and select alarm output channel 6 step Set PTZ linkage for signal level alarm A Note Alarm input can link PTZ of several channels but one channel can only link one option of preset sequence and pattern 8 2 3 Video Loss Analog camera 1 v step Select the channel number for video loss Select E Channel Farameters gt p Yi deo Lost settings note If the device is 9000 series DVR you can click Switch to digital channel to configure the video loss of IP settings channel Settings 74 User Manual of Client Software 4000 v2 0 Analog camera 1 ad Settings 2 step Enable Video Loss to activate settings of Fortify Time and Linkage 3 step Set the fortify time for video loss M b Se 3 Click Settings in Fortify Time menu r Select Weekday as some day of the week or the whole E 3 week for the fortify time The A
77. then you can play them back 0001 0002 0003 0004 0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027 0028 0029 0030 0031 0032 Click icon ty in the list to play back the linked recordings 2009 03 11 09 37 40 2009 03 11 09 37 40 2009 03 11 09 37 40 2009 03 11 09 37 40 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 15 01 06 2009 03 12 16 22 37 2009 03 12 16 22 42 2009 03 12 16 22 44 2009 03 12 16 22 49 2009 03 12 16 22 52 2009 03 12 16 22 57 2009 03 12 16 23 08 2009 03 12 16 23 23 2009 03 12 16 23 35 2009 03 12 16 23 36 2009 03 12 16 23 43 2009 03 12 16 23 46 2009 03 12 16 23 50 2009 03 12 16 23 52 2009 03 12 16 24 03 2009 03 12 16 24 05 2009 03 12 16 24 23 2009 03 12 16 24 24 2009 03 12 16 24 39 2009 03 12 16 40 58 2009 03 12 16 41 03 2009 03 12 16 41 08 2009 03 12 16 41 15 2009 03 12 16 41 21 Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Start Preview Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Start Recording Stop Recording Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Query Local Recording Files Qu
78. ub map in the main map 10 2 2 1 Add Hot Region f El Add Sub E map 1 step Enter hot region adding interface Right click the image name in the map info area or the Add Hot Spot image itself and select Add Hot Regions El Add Hot Regions Delete Properties 91 User Manual of Client Software 4000 v2 0 Hot Area Hot Area Name New Hot Region1 Appearanc FA Text Color LI Relate Ps step Input the name of the hot region click fA button to select icon for hot region O NewMap1 You can also click LI to change the color of characters Belong to E map NewMap1 Hot Area Hot Area Name New Hot Region2 Appearanc FA Text Color a Relate an step Select the map from the Related E map list and press OK to finish After succeed to add hot region move the mouse to the icon of O NewMap1 q 0 AA hot region it will become as _ and you can move the hot region by pressing left button and dragging Belong to E map NewMap1 After hot region related to the map double click the hot region icon in the non edit mode will show the related map A Note You cannot edit map unless in the edit mode 10 2 2 2 Edit Hot Region In the edit mode right click the icon of the hot region Delete the edit menu will pop up Properties Select Delete to delete the hot region select Properties to change the name appearance and rel
79. ult group You can Short key Group add channels in it or delete it Default Group 16 User Manual of Client Software 4000 v2 0 Short key Group Right click in the empty area and you will see sub menu as shown on the right ma Default Group Select Add Group Add Group Add Group Group Information Input the group name and click OK Group Group Modify Group Double click the group name to change the group name Group Information Right click the group name and select Delete Group to delete the Group Group selected group A Note Enter Space TAB is invalid in the group name which cannot be null and should not contain the following characters including and 4 2 2 Channel After adding the group the channels in the list area can be moved to selected group Select the channel from the list area and click key and move it to the group The type of channel name in the group area is as device name_channel name of the list area Right click to choose the add area add stream media add device Short key Group a mb Default Group g 6101 E Group1 3 Channel 01 3 6101_Channel 01 9000test 3 9000test_Channel 01 3 Channel 01 R 9000test_Channel 03 3 Channel 02 3 9000test_Channel 13 3 Channel 09 Channel 10 3 Channel 11 3 Channel 12 S channel 13 3 Channel 14 Select the device in the list area and click key and all the
80. ut f4 Note RS 485 configuration must be DEA Device Serial DS 8016H5 S0120080823ACCHD10339837WVU l E Alarm Parameters Ey Exception Parameters E Account Management the same with PTZ configuration E Update Remotely E HDD Format a M a 6 2 PTZ Control Return to preview interface and user can control PTZ 6 2 1 Direction Control There are 8 keys to control PTZ directions and the active bar to change PTZ speed which is adjustable from 1 to 7 and default speed is 4 Click amp key to start auto scan Click the function keys on the right to adjust focus iris and zoom Other PTZ Control Mode Screen PTZ Control user can control PTZ by dragging and click in the play window 34 User Manual of Client Software 4000 v2 0 Drag Control There are 3x3 nine areas when the mouse moves to area 1 8 the mouse icon will become as O 0 La A lt i 9 i gt a van lt A ana continued to move the mouse along the direction shown by arrows PTZ will move to the same directions Anote This function is only available for software decode 6 2 2 Partial Zoom ll Click Partial Zoom to zoom in or out the mouse icon will become asL 11 press the left key of the mouse and drag a area you want to zoom Drag from up left to down right to zoom in drag from down right to up left to zoom out A Note This function is only available as HIKVISION protocol is selected for PTZ 6
81. view or record otherwise there will be warning information popping up 4 1 1 Add Device Modify Device information m Device Information Device Name 33 Register Mode Normal IP Right click the area and select Add Device IP AA Port Device the sub menu will pop up napi eae Channel No Multicast You can also add PCDVR here in the AE 0 0 E o same way with other devices Device serial DS2CD852MF E0020080926BCWR200091083WC Online Device Cancel ee 11 User Manual of Client Software 4000 v2 0 Multicast Address Used when visiting the device by the way of multicast or else leave it blank DNS Address IP address of IP server when adopting private domain or else leave it blank Used when adopting private domain or else leave it blank Anore When adopting private domain if you input device serial number which can be used for obtaining the IP address from IP server If not the IP address can be obtained by device name from IP server i e in that case the device name that input here should be the same with the one in the device Modify Device information If lect ld i Device Information e IO s Device Name 852MF E Reaister Mode Normal Domain please filling the blank of domain name Domain Name abc vicp nei Port 8000 Username admin with the registered domain name Password m Multicast 0 0 0 0 Belong to area mlb Device serial DS2CD852MF E0020080926BCWR200091083WC Onli
82. y a y a E a Whole Week ER 5 step Set linkage for video tampering Click Settings in the Linkage menu 8 2 5 Exceptions Exception parameters are for the alarm handle of abnormal event which is including HDD Full HDD Fault HDD errors or HDD not initialization Network Broken IP Address Conflict Illegal Access user name or password wrong Video Output Standard Mismatch and Video Signal Exception video signal unstable Select the exception type and handle method Select EI Ewe to enter configuration interface 77 User Manual of Client Software 4000 v2 0 8 3 Network Configuration 8 3 1 Basic Configuration NIC Type 10M 100N 1000M Au y Device IP 112 8 104 11 Obtain Auto Device Port 8000 If there is DHCP server in the network enable Obtain Auto Subnet Mask 255 255 255 0 Select mi Network Parameters gt Pagtetwork Settings Configure the network according to the actual situation Default Gateway 172 8 104 1 MAC 00 81 31 51 20 08 Multicast D 0 0 0 HITP Port 80 and reboot the device to get the IP address under this network segment automatically Advance Advanced Network Settings Select Advance to enter advanced configuration You I Sarvari DNS Server2 can configure preferred DNS server1 and spare DNS server2 AA IP address of alarm host and IP server A LA IP s
83. ype Pop up image when alarm occurs Pop up single screen image when alarm occurs E map Alarm When alarm occurs the related hotspot in the e map twinkles Alarm Log Record a log on the alarm information when alarm received Sound Alarm Alarm triggers local alarm sound Alarm Link Recording Alarm triggers local recording of alarm channel A Note Before alarm linkage configuration the alarm schedule and handle method of the device are required to set correctly 9 2 On Guard Off Guard You can choose On Guard and Off Guard to decide whether to handle alarm signal or not mb H 6101 Right click the device name in the preview mode and Faortify select Fortify to enable to monitor the alarm of the device Device Synchronization and the icon of the device will become asthe Open intercom channel 1 Open intercom channel 2 Device Status Alarm Output Control All Main Streams All Sub Streams Remote Control Panel 86 User Manual of Client Software 4000 v2 0 c 4 mlb CE 6101 a PA If the device is on guard right click the device name you Cancel Guard can select the Cancel Guard to cancel monitoring the alarm ANA E Device Synchronization of the device Open intercom channel 1 Open intercom channel 2 Device Status Alarm Output Control All Main Streams All Sub Streams Remote Control Panel E anila Disalarm All Right click the area name select Fo

Client Software-4000(V2.00.02) User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents