Full HD Multi System LCD TV
Contents
1. NMOL 22 Full HD Multi System LCD TV Model No ALT2260M NOL so Attention Please kindly refer to TV Broadcasting system Page 8 of User s manual for the choosing suitable TV broadcasting system as per your living area when you use this unit firstly TV Color system is automatically searched regardless of your living area Read all of the instructions before using this TV and keep the instruction manual in a safe place for future reference Contents an A N CONN nN 9 10 10 11 12 13 Introduction Safety Precautions Unit and Accessory Getting Started Product Feature Front View Rear View Remote Control Basic Installation TV OSD Menus Picture menu Sound menu Function menu TV menu PC menu Advance menu 14 Troubleshooting 15 Technical Specification Introduction Congratulations on choosing to buy this high quality LCD TV Safety is Important N To ensure your safety and the safety of others please ensure you read the Safety Instructions before you operate this product Keep this information in a safe place for future reference Never allow children to play with electrical equipment Safety Precautions Before using your TV please read these instructions carefully and keep this manual for future reference Carefully observe and comply with all warnings cautions and instructions placed on the unit or described in the operating instructions or service manual gt2. Factory Default TV Menu The menu is only used in TV mode Auto Tune Manual Tune Fine Tune Skip Color System Sound System Channel Swap Move lt gt Select Auto Tune Press VOL button the TV will start to auto search When Auto Tune is completed the TV will display the first station received Note When Auto Tune starts you can press MENU to stop it 11 Manual Tune press VOL button to search forwards and press VOL button to search backwards When a station is found press CH to move to the item Store and press VOL to store the station Fine Tune press VOL button to tune upwards and press VOL button to tune downwards Skip Some received channels may be your unwanted channels you can remove them from the list by the skip function When skip is on for a particular channel this channel is Skipped when using CH buttons You may still select it using Numeric buttons Color System press VOL button to select the color system Please refer to page correct selection Sound System press VOL button to select the sound system Please refer to page8 correct selection Channel Swap press VOL button to enter the swap menu as the following picture Channel swap Channel1 Channel2 Channel Swap Move 4 Select Swap channels for example Use CH buttons to select Channel 1 Use VOL buttons to 1 Select Channel 2 use VOL buttons to select 5 Then select Cha
3. to select the Main Menu Picture Sound Function TV PC Advance and press VOL button to enter You can press VOL buttons to select adjust or enter a sub menu Note Items highlighted in the Menus can be adjusted Items greyed out are not available Picture menu Picture Mode Brightness Contrast Saturation Sharpness Hue 4 gt Select Picture Mode select the picture display mode User Normal Soft Vivid You can also use the P MODE button on the remote control to select Brightness adjust the brightness of the picture Contrast adjust the contrast of the picture Saturation adjust the colour of the picture Sharpness adjust the sharpness of the picture Hue adjust the hue of the picture only used in NTSC mode Note when you are in the PC mode you can only adjust the brightness and contrast Sound menu Sound Mode Volume Bass Treble Balance Surround 4 gt Select Sound Mode select the sound mode User Normal News Movie You can also use the S MODE button on the remote control to select Volume adjust the volume of the sound You can also use VOL button on the remote control or the TV set to adjust the volume Bass adjust the bass Treble adjust the treble Balance adjust the balance Surround Turn on off the surround Function menu Language 4 English Blue Back 4 on Timer TTX Language 4 WEST Reset 4 gt Select NICAM reception option If your set
4. e DC mains adaptor this will feel warm to the touch and must be allowed to radiate the heat Do not place the TV in a cabinet where airflow is restricted to prevent overheating Do not use the TV in wet or damp conditions if water or liquids are allowed to enter the A case disconnect the power and call the Technical Help line Do not handle the TV or Power adaptor with wet hands During an Electrical storm or when going on holiday disconnect from the mains supply and aerial if external or rooftop Do not place heavy objects on the mains lead or adaptor lead do not place the leads where they can be stepped on cut or damaged If the leads do become damaged please call the Technical Help Line for advice issue Do not open the case or Power adaptor you risk a severe electric shock injury or death Do not drop objects into the TV ventilation slots Should an object enter the TV contact the Technical Help Line for advice A Do not place the TV near heat sources such as radiators or direct sunlight Cleaning the TV Disconnect from the supply before cleaning Do not use petrol based or chemical cleaning fluids You may wipe with a soft damp cloth For stubborn sticky dirt use a diluted detergent solution h Do not drop or damage the TV If the casing becomes damaged it may cause a safety LCD Screen Do not use chemical solvents on the screen surface sticky finger marks must only be removed with a diluted detergent solution Occasio
5. e Remote Control the source menu will display on the screen see picture right Use CH TV buttons to select the source press VOL button to confirm AV 4 Press MENU button on the TV or on the remote control the screen SVIDEO will display the OSD menu press CH button to select the third menu TV SCART see picture below press VOL button to enter the menu press CH buttons ACT to select the item Auto Tune Press VOL button the TV will start to auto HDMI search When Auto Tune is completed the TV will display the first station received Auto Tune Manual Tune Fine Tune Skip Color System Sound System Channel Swap Move 4 Select COLOR TV BROADCASTING SYSTEM Country Color System Sound System AZORES PORTUGAL PAL B G BALKANS KOSOVO BOSNIA PAL B G BELGIUM GERMANY ITALY PAL IRAQ AFGHANISTAN PAL NETHERLANDS NORWAY PAL SAUDI ARABIA PAL KUWAIT TURKEY JORDAN PAL UNITED KINGDOM PAL CZECH HUNGARY POLAND PAL RUSSIA U S A JAPAN KOREA GUAM PC 1 Connect the TV to the PC using a 15pin VGA lead and a PC audio socket 2 Press TV AV button to display the source menu use CH buttons to select PC and press VOL button to confirm The TV will now display the signals from the PC You may need to adjust the PC to the TV See page 12 TV OSD Menus Press MENU button on the remote control the screen will display the OSD menu press CH buttons
6. e mode User Normal Soft or Vivid 11 CH scan through channels Cursor buttons in TV menu VOL adjust the volume Cursor buttons in TV menu MENU TV system setup menu OONOOA 12 TELETEXT FUNCTION TXT TV turn off on Teletext MIX display Teletext on top of the normal TV picture SUBPAGE press to subpage again to cancel NICAM A2 HOLD hold or carry on the current subpage REVEAL reveal any hidden text INDEX go to index SIZE press to see top half of page double size Press again to see the bottom half of page double size Press again for normal size CANCEL cancel Teletext Colour buttons short cuts follow the coloured links in the text Installing the Remote Control Batteries Remove the battery cover from the remote control and put 2x AA size batteries provided inside the compartment Using the Remote Control To use the remote control point it towards the sensor located on the front right of the TV set You can operate all functions using the remote control Additionally some functions also have buttons on the TV set see Page 5 7 Note If the TV set is not going to be used for an extended period of time remove the batteries from the remote control and unplug the unit 7 Basic Installation TV 1 Connect the Power adaptor to the DC input socket and the Aerial lead to the TV Tuner input 2 To turn ON press POWER button 3 Press TV AV button on the TV or TV AV button on th
7. ion to Power adaptor HDMI Connect to the HDMI of your DVD or other equipment VGA PC Monitor display input Connect to your PC Mini D15 pin connector SCART Composite video and Audio input from VCR or other devices S Video In Alternative High Quality Video only sound via AV R AV L Video CVBS video input from other sources such as Camcorder L AV R AV Right and Left Audio input from other sources such as Camcorder PC Audio In Audio connection from PC Headphone Connect it to your headphone or other audio equipment RF Tuner Antenna RF input Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket NOT SUPPLIED Remove the Two Posi screws holding the base to the base bracket and lift the base away do not remove the base mounting bracket Mount the VESA bracket using 4 x M4x10 Iso metric threaded screws not supplied Do not use screws longer than 10mm damage will occur to the internal parts Fit the wall bracket securely following the manufacturers instructions 6 Remote Control RECALL 1 TV AV input source select 2 POWER turn on or off the TV 3 0 9 choose channel directly Number buttons for Teletext MUTE silence SLEEP shutdown timer RECALL go back to play the last channel SYSTEM adjust TV s colour amp audio norm CALL display current mode S MODE select the sound mode User Normal News or Movie 10 P MODE select the pictur
8. is equipped with the receiver for NICAM reception the high quality NICAM Near Instaneous Companding Audio Multiplex digital sound can be received Sound output can be selected according to the type of received broadcast as follows by pressing the I II button repeatedly 1 When NICAM mono is received you can only select MONO 2 When NICAM stereo is received you can select NICAM STEREO or MONO If the stereo signal is weak switch to mono 3 When NICAM dual is received you can select NICAM DUAL I NICAM DUAL II or MONO 2 A2 Stereo is supported in this model Note Language select the OSD Language Blue Back select On or Off of blue background under no signal TTX Language select the Teletext language choose West for normal viewing Timer press VOL button to enter the timer menu as the following picture CURRENT Off time On time On channel 4 gt Select You must set the Select Current Time by pressing CH buttons to select the HOURS press VOL and CH to change the time Press VOL to select MINUTES and CH buttons to set the time To set the OFF and ON times Select using CH buttons set the times required as you did setting the time If you want the TV to switch to a particular station select On channel using CH buttons and change using VOL buttons the TV will then switch at the requested time Reset select Reset and press VOL to reset all analogue settings to
9. nally one or two bright dots may be seen on the screen this is not considered a fault Unit and Accessory TV set Power Cable Adapter 220V Power Socket Din to F Connector User s Manual Remote Control including 2xAA batteries Getting Started Product Feature Inputs RF SCART VGA HDMI PC Audio in Video S Video TV Systems PAL BG DK I SECAM BG DK NTSC M 200 channels No Signal TV Auto standby Timer functions Programme exchange swap Front View 0 0 0 0 0 0 MENU CH VOL VOL TV AV POWER LED Indicator Remote control window keep clear 1 IR Infrared Receiver Receives IR signals from the remote control Power on Standby LED Indicator Press POWER to turn on and off Indicator on Red Standby mode Indicator on Green Power on mode The effective range of the IR signal is approx 6 metres and at an angle of up to 30 deg 2 The functions of the buttons are described as below MENU Press to display the TV menu Press again to exit the menu CH CH Press to scan through the channels When pressing and holding down either button user can scan channels quickly VOL VOL Press to adjust the volume TV AV Press to select the source TV AV S VIDEO SCART VGA HDMI Power Turn on off the TV set 5 Rear View TO CO O O eeOOO Eimi D o Hl RF Q PC in R L Video S Video SCART VGA HDMI Power Headphone out Audio in Power Connect
10. nnel Swap and press VOL to swap PC menu the menu can only be used in PC mode H Position V Position Clock Phase Auto sync 4 gt Select H V Position adjust the horizontal vertical position of the screen Clock adjust the pixel clock frequency until the image size is maximised for the screen Phase adjust the phase of the ADC sampling clock relative to the sync signal until a stable image is obtained Auto sync press VOL button to setup the parameter of the screen automatically 12 Advance Scale 4 16 9 gt 3D NR 4 MID gt Color Temp 4 Normal p Move 4 gt Select Scale exchange the 16 9 and 4 3 picture mode 3D NR noice reduce function LOW MID HIGH OFF Color Temp select the Color temperature mode Normal Cool Warm User User allows you to set the Red Green and Blue individually 13 Troubleshooting RM In some region the digital terrestrial signal may be weak So you d better use the antenna in which the booster was built for watching the weak signal channels TV Problems No power Check the power connection Pull the plug out wait for 1 minute then reconnect the power and open the set No picture and sound Ensure that the TV is plugged I and that the power is on Ensure that the aerial is connected Try a different program Poor picture quality Check the aerial connections Check that the channel is tuned properly Adjust the picture settings b
11. rightness colour sharpness contrast hue Make sure that the TV is not located close to electrical appliances that may emit radio frequency interference No colour Adjust the colour setting Check that the program is broadcast in colour Check that the channel is turned properly Do not respond to remote control Check that there are no obstructions between the remote control and the unit Check that the remote control is within range of the unit Check that the battery in the remote control is not weak or exhausted 14 Technical Specification MA ee 640x480 800x600 1024x768 1280x1024 1360x768 1920x1080 60Hz Power Supply AC100 240V 50 60Hz Weight 70 g without batteries VGA supports 15 MNAL LIMITED WARRANTY Asiaventurelink Co Ltd will repair or replace without charge at its option your product which proves to be defective in material or workmanship under normal use during the warranty period listed below from the date of original purchase WARRANTY PERIOD MODEL LABOR PARTS ALT2260M 90 Days 1 Year No other express warranty is applicable to this product The duration of any implied warranties including the implied warranty of merchantablility is limited to the duration of the express warranty herein Asiaventurelink Co Ltd shall not be liable for the loss of the use of the product inconvenience loss or any other damages direct or consequential arising ou
12. t PP m RoH o The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerousvoltages within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the user The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Correct disposal of this Product Waste Electrical amp Electronic Equipment WEEE The crossed out Wheelie bin is intended to show that this appliance must not be placed with ordinary household waste at the end of its useful life To prevent possible harm to the environment or human health from uncontrolled waste disposal please keep separate from other household waste and recycle It is your responsibility to promote the sustainable re use of material resources Householders should contact their local authority waste disposal department for details of recycling schemes in their area This unit complies with relevant European safety electrical interference and dangerous substances Directives This unit complies with RoHS directive Safety Information cont Do not place the TV on an unstable surface it may tip over and cause injury or damage to the LCD screen or the user ensure the ventilation holes are not covered Do not cover th
13. t of the use of or inability to use this product or for any breach of any express or implied warranty including the implied warranty of merchantability applicable to this product Some states do not allow the exclusion or limitation of incidental consequential damages or limitations on how long an implied warranty lasts so these limitations or exclusions may not apply to you This warranty gives you specific legal right and you may also have there rights which vary from state to state THE ABOVE WARRANTY DOES NOT APPLY To damages or problems which result from delivery or improper installation To damages or problems which result from misuse abuse accident alteration or incorrect electrical current or voltage To service calls which do not involve defective workmanship or material such as head cleaning and explaining the operation of the unit Therefore these costs are paid by the consumer To prove warranty coverage Retain your sales receipt to prove date of purchase Copy of your sales receipt must be submitted at the time warranty service is provided Without receipt of proof of purchase no warranty will be honored CUSTOMER SERVICE ASSISTANCE Asiaventurelink Co Ltd 1007 Renaissance Tower Gongdeok dong Mapo gu Seoul Korea TEL 82 2 3273 8990 FAX 82 2 712 8342 E MAIL AVL AVL21c com Web www AVL21c com Printed in China
Download Pdf Manuals
Related Search