Home

Appliance Manual

image

Contents

1. hissing buzzing the fan operates The noises are normal and do not refer to hob malfunction 5 3 ko Timer Eco Timer To save energy the heater of the cooking zone deactivates before the count down timer sounds The difference in the operation time depends on the heat setting level and the length of the cooking operation 5 4 Examples of cooking applications The relation between the heat setting and the cooking zone consumption of power is not linear When you increase the heat setting it is not proportional to 12 www aeg com the increase of the cooking zone consumption of power It means that the cooking zone with the medium heat setting uses less than a half of its power The data in the table is for guidance only Heat setting Use to Time Hints min ET Keep cooked food warm asnec Puta lid on the cookware essary 123 Hollandaise sauce melt but 5 25 Mix from time to time ter chocolate gelatine 1 3 Solidify fluffy omelettes 10 40 Cook with a lid on baked eggs 3 5 Simmer rice and milkbased 25 50 Add the minimum twice as dishes heating up ready much liquid as rice mix milk cooked meals dishes part procedure through 5 7 Steam vegetables fish meat 20 45 Add some tablespoons of liq uid 7 9 Steam potatoes 20 60 Use max water for 750 g of potatoes 7 9 Cook larger quantities of food 60 150 Up to 31 liquid plus ingredi stews and soups ents 9 12 Gentle fr
2. mn HAEG perfekt in form und funktion
3. AND TIPS WARNING Refer to Safety chapters 5 1 Cookware 1 For induction cooking zones a strong electro magnetic field creates the heat in the cookware very quickly Use the induction cooking zones with correct cookware 1 Cookware material correct cast iron steel enamelled steel stainless steel the bottom made of multi layer with correct mark from a manufacturer not correct aluminium copper brass glass ceramic porcelain Cookware is correct for an induction hob if some water boils very quickly on a zone set to the highest heat setting amagnet pulls on to the bottom of the cookware The bottom of the cookware must be as thick and flat as possible Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit The cooking zone efficiency is related to the diameter of the cookware The cookware with a smaller diameter than ENGLISH 11 the minimum receives only a part of the power generated by the cooking zone 1 5 2 The noises during operation Refer to Technical information chapter If you can hear crack noise cookware is made of different materials sandwich construction whistle sound you the cooking zone with high power level and the cookware is made of different materials sandwich construction humming you use high power level clicking electric switching occurs
4. ON OFF To activate and deactivate the hob H a Lock The Child Safety De To lock unlock the control panel vice 5 To activate and deactivate the function Heat setting display To show the heat setting Timer indicators of cooking To show for which zone you set the time zones Timer display To show the time in minutes To select the cooking zone To increase or decrease the time Power function To activate and deactivate the function Control bar To set a heat setting 3 3 Heat setting displays Display Description The cooking zone is deactivated The cooking zone operates STOP GO function operates Automatic Heat Up function operates Power function operates aye E digit A There is a malfunction OptiHeat Control 3 step Residual heat indicator continue cooking keep warm residual heat Lock The Child Safety Device function operates Incorrect or too small cookware or no cookware on the cooking zone Automatic Switch Off function operates www aeg com 3 4 OptiHeat Control 3 step Residual heat indicator WARNING 3 G G there is a risk of burns from residual heat The indicator shows the level of the residual heat 4 DAILY USE WARNING Refer to Safety chapters 4 1 Activating and deactivating Touch D for 1 second to activate or deactivate the hob 4 2 Automatic
5. Switch Off The function deactivates the hob automatically if all cooking zones are deactivated you do not set the heat setting after you activate the hob you spill something or put something on the control panel for more than 10 seconds a pan a cloth etc An acoustic signal sounds and the hob deactivates Remove the object or clean the control panel the hob gets too hot e g when a saucepan boils dry Let the cooking zone cool down before you use the hob again you use incorrect cookware The symbol UJ comes on and the cooking zone deactivates automatically after 2 minutes you do not deactivate a cooking zone or change the heat setting After some time comes and the hob deactivates The relation between the heat setting and the time after which the hob deactivates The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware The glass ceramic is heated by the heat of the cookware The hob deacti vates after Heat setting 1 3 6 hours 4 7 5 hours 8 9 4 hours 10 14 1 5 hour 4 3 The heat setting To set or change the heat setting Touch the control bar at the correct heat setting or move your finger along the control bar until you reach the correct heat setting m 19 3 5 8 10 l4 P p 4 4 Cooking zone indication min EF max I The horizontal line shows the maximum size of the cookware The brea
6. technology Induction Diameter of circular cook Left front 14 5 cm ing zones Left rear 21 0 cm Middle rear 21 0 cm Right front 14 5 cm Right rear 21 0 cm Energy consumption per Left front 179 0 Wh kg cooking zone EC electric Left rear 166 3 Wh kg cooking Middle rear 174 9 Wh kg Right front 176 6 Wh kg Right rear 174 9 Wh kg Energy consumption of the 174 3 Wh kg hob EC electric hob EN 60350 2 Household electric cooking appliances Part 2 Hobs Methods for measuring performance 10 2 Energy saving You can save energy during everyday cooking if you follow below hints When you heat up water use only the amount you need e Ifitis possible always put the lids on the cookware Before you activate the cooking zone put the cookware on it e Put the smaller cookware on the smaller cooking zones e Put the cookware directly in the centre of the cooking zone e Use the residual heat to keep the food warm or to melt it 11 ENVIRONMENT CONCERNS Recycle the materials with the symbol Put the packaging in applicable containers to recycle it Help protect the environment and human health and to recycle waste of electrical and electronic appliances Do not dispose appliances marked with the symbol amp with the household waste Return the product to your local recycling facility or contact your municipal office ENGLISH 19 www aeg com shop 867320060 082015 A
7. Check if the hob is correctly connected to the electrical supply Refer to the connec tion diagram The fuse is released You touched 2 or more sen sor fields at the same time Make sure that the fuse is the cause of the malfunction If the fuse releases again and again contact a quali fied electrician Activate the hob again and set the heat setting in less than 10 seconds Touch only one sensor field STOP GO function oper ates There is water or fat stains on the control panel Refer to Daily use chapter Clean the control panel An acoustic signal sounds and the hob deactivates An acoustic signal sounds when the hob is deactivated You put something on one or more sensor fields Remove the object from the sensor fields The hob deactivates You put something on the sensor field Remove the object from the sensor field Residual heat indicator does not come on Automatic Heat Up function does not operate The zone is not hot because it operated only for a short time The zone is hot If the zone operated suffi ciently long to be hot speak to an Authorised Service Centre Let the zone become suffi ciently cool www aeg com Problem Possible cause Remedy The highest heat setting is set The highest heat setting has the same power as the func tion The heat setting changes between two levels The sensor fields become
8. EN User Manual HK855200FB Hob O HAEG perfekt in form und funktion 2 www aeg com CONTENTS T SAFETY INFORMATION ren 3 2 SAFETY INSTRUCTIONS een 4 3 RODUCT IDE SCRIP TNO N 6 4 DAILY US Bret ns ausa daag skan cond tae br an ans 8 5 FIINTS AND TIPS ea 11 6 CARE AND CLEANING si aa si s E A Ra 12 Z TROUBLESHOOTING MN 13 8 INSTALLATION et sided ada E be HOP ehe O NRE 15 9 TECEINICAL INFORMATION aiite en 17 10 ENERGY EFFICIENCY anne 18 FOR PERFECT RESUETS Thank you for choosing this AEG product We have created it to give you impeccable performance for many years with innovative technologies that help make life simpler features you might not find on ordinary appliances Please spend a few minutes reading to get the very best from it Visit our website for Get usage advice brochures trouble shooter service information www aeg com g Register your product for better service www registeraeg com Buy Accessories Consumables and Original spare parts for your appliance www aeg com shop CUSTOMER CARE AND SERVICE Always use original spare parts When contacting our Authorised Service Centre ensure that you have the following data available Model PNC Serial Number The information can be found on the rating plate A Warning Caution Safety information 1 General
9. ds acti vate the zone again If the cookware was the problem the error message goes out Residual heat indicator can stay on Let the cookware become sufficiently cool Check if your cookware is compatible with the hob Refer to Hints and tips chapter 7 2 If you cannot find a solution If you cannot find a solution to the problem yourself contact your dealer or an Authorised Service Centre Give the data from the rating plate Give also three digit letter code for the glass ceramic it is in the corner of the glass 8 INSTALLATION WARNING Refer to Safety chapters 8 1 Before the installation Before you install the hob write down the information bellow from the rating plate The rating plate is on the bottom of the hob Serial 8 2 Built in hobs Only use the built in hobs after you assemble the hob into correct built in surface and an error message that comes on Make sure you operated the hob correctly If not the servicing by a service technician or dealer will not be free of charge also during the warranty period The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet units and work surfaces that align to the standards 8 3 Connection cable e Fora single phase or two phase connection use the following or higher mains cable type HOSBB F Tmax 90 C To replace the damaged mains cable use t
10. e function touch of the timer to set the time 00 99 minutes When the indicator of the cooking zone starts to flash slowly the time counts down ENGLISH 9 To see the remaining time set the cooking zone with The indicator of the cooking zone starts to flash quickly The display shows the remaining time To change the time set the cooking zone with Touch or To deactivate the function set the cooking zone with CD and touch The remaining time counts back to 00 The indicator of the cooking zone goes out When the time comes to an end the sound operates and 00 flashes The cooking zone deactivates To stop the sound touch O CountUp Timer The count up timer You can use this function to monitor how long the cooking zone operates To set the cooking zone touch o again and again until the indicator of a necessary cooking zone comes on To activate the function touch of the timer UP comes on When the indicator of the cooking zone starts to flash slowly the time counts up The display switches between UP and counted time minutes To see how long the cooking zone operates set the cooking zone with The indicator of the cooking zone starts to flash quickly The display shows how long the zone operates To deactivate the function set the cooking zone with and touch or The indicator of the cooking zone goes out Minute Minder You can use this function as a Mi
11. ed If the appliance is installed above drawers make sure that the space between the bottom of the appliance and the upper drawer is sufficient for air circulation The bottom of the appliance can get hot Make sure to install a non combustile separation panel under the appliance to prevent access to the bottom Make sure that the ventilation space of 2 mm between the worktop and the front of the below unit is free The warranty does not cover damages caused by the lack of an adequate ventilation space 2 2 Electrical Connection WARNING Risk of fire and electrical shock All electrical connections should be made by a qualified electrician The appliance must be earthed Before carrying out any operation make sure that the appliance is disconnected from the power supply Make sure that the electrical information on the rating plate agrees with the power supply If not contact an electrician Make sure the appliance is installed correctly Loose and incorrect electricity mains cable or plug if applicable can make the terminal become too hot Use the correct electricity mains cable Do not let the electricity mains cable tangle Make sure that a shock protection is installed Use the strain relief clamp on the cable Make sure the mains cable or plug if applicable does not touch the hot appliance or hot cookware when you connect the appliance to the near sockets Do not use multi plug adapters a
12. he following or higher mains cable type HOSBB F Tmax 90 C Speak to your local Service Centre 16 www aeg com 8 4 Assembly Cc 000 min 2 mm B 12mm 57mm 28mm 41mm 38mm 31mm E d 20 mm min 500 mm gt min 30 mm min 500 mm mm 57 mm 28mm 41mm 38mm 31mm min 38 mm min 2mm ENGLISH 17 min 12 mm min 2 mm 9 TECHNICAL INFORMATION 9 1 Rating plate Modell HK855200FB PNC 949 595 396 00 Typ 58 GBD CF AU 220 240 V 50 60 Hz Induction 7 4 kW Made in Germany Ser NE uses 7 4 kW AEG CE 9 2 Cooking zones specification Cooking zone Nominal power Power function Power function Cookware diam maximum heat W maximum dura eter mm setting W tion min Left front 1400 2500 4 125 145 Left rear 2300 3200 10 125 210 Middle rear 2300 3200 10 125 210 Right front 1400 2500 4 125 145 Right rear 2300 3200 10 125 210 The power of the cooking zones can be For optimal cooking results use different in some small range from the cookware not larger than the diameter in data in the table It changes with the the table material and dimensions of the cookware 18 www aeg com 10 ENERGY EFFICIENCY 10 1 Product information according to EU 66 2014 Model identification HK855200FB Type of hob Built In Hob Number of cooking zones 5 Heating
13. hot There is no signal when you touch the panel sensor fields Power management function operates The cookware is too large or you put it too near to the controls The signals are deactivated Refer to Daily use chapter Put large cookware on the rear zones if possible Activate the signals Refer to Daily use chapter s comes on t comes on 2 comes on Automatic Switch Off oper ates The Child Safety Device or the Lock function operates There is no cookware on the zone Deactivate the hob and acti vate it again Refer to Daily use chapter Put cookware on the zone The cookware is incorrect The diameter of the bottom of the cookware is too small for the zone Use the correct cookware Refer to Hints and tips chapter Use cookware with correct dimensions Refer to Technical informa tion chapter and a number come There is an error in the hob Disconnect the hob from the electrical supply for some time Disconnect the fuse from the electrical system of the house Connect it again HG comes on again speak to an Authorised Service Centre Problem Possible cause ENGLISH 15 Remedy comes on There is an error in the hob because a cookware boils dry Automatic Switch Off and the overheating protec tion for the zones operate Deactivate the hob Remove the hot cookware After ap proximately 30 secon
14. information and tips Environmental information Subject to change without notice ENGLISH 3 1 SAFETY INFORMATION Before the installation and use of the appliance carefully read the supplied instructions The manufacturer is not responsible if an incorrect installation and use causes injuries and damages Always keep the instructions with the appliance for future reference 1 1 Children and vulnerable people safety This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Do not let children play with the appliance Keep all packaging away from children Keep children and pets away from the appliance when it operates or when it cools down Accessible parts are hot If the appliance has a child safety device we recommend you activate it Cleaning and user maintenance shall not be made by children without supervision Children of less than 3 years should be kept away unless continuously supervised 2 General Safety The appliance and its accessible parts become hot during use Do not touch the heating elements Do not operate the appliance by means of an external timer or separate remote control system Unattended cooking on a hob with fat or oil can be dangerous and ma
15. k in the horizontal line shows the minimum cookware diameter Refer to Technical information chapter 4 5 Automatic Heat Up If you activate this function you can get a necessary heat setting in a shorter time The function sets the highest heat setting for some time and then decreases to the correct heat setting To activate the function the cooking zone must be cold To activate the function for a cooking zone touch P comes Immediately touch the correct heat setting After 3 seconds 8 comes on To deactivate the function change the heat setting 4 6 Power function This function makes more power available to the induction cooking zones The function can be activated for the induction cooking zone only for a limited period of time After this time the induction cooking zone automatically sets back to the highest heat setting 1 To activate the function for a cooking Refer to Technical information chapter zone touch P comes on To deactivate the function change the heat setting 4 7 Timer Count Down Timer You can use this function to set how long the cooking zone should operate for a single cooking session First set the cooking zone then set the function You can set the heat setting before or after you set the function To set the cooking zone touch again and again until the indicator of a necessary cooking zone comes on To activate th
16. nd extension cables Make sure not to cause damage to the mains plug if applicable or to the mains cable Contact our Authorised Service Centre or an electrician to change a damaged mains cable The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools Connect the mains plug to the mains socket only at the end of the installation Make sure that there is access to the mains plug after the installation If the mains socket is loose do not connect the mains plug Do not pull the mains cable to disconnect the appliance Always pull the mains plug Use only correct isolation devices line protecting cut outs fuses screw type fuses removed from the holder earth leakage trips and contactors The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles The isolation device must have a contact opening width of minimum 3 mm 2 3 Use WARNING Risk of injury burns and electrical shock Remove all the packaging labelling and protective film if applicable before first use Use this appliance in a household environment Do not change the specification of this appliance Make sure that the ventilation openings are not blocked ENGLISH 5 Do not let the appliance stay unattended during operation Set the cooking zone to off after each use Do not rely on the pan detector Do no
17. nute Minder when the hob is activated and the cooking zones do not operate the heat setting display shows 2 To activate the function touch Touch or of the timer to set the time When the time comes to an end the sound operates and 00 flashes www aeg com To stop the sound touch O The function has no effect on the operation of the cooking zones 4 8 STOP GO This function sets all cooking zones that operate to the lowest heat setting When the function operates you cannot change the heat setting The function does not stop the timer functions STOP To activate the function touch amp comes on STOP To deactivate the function touch The previous heat setting comes on 4 9 Lock You can lock the control panel while cooking zones operate It prevents an accidental change of the heat setting Set the heat setting first To activate the function touch comes on for 4 seconds Timer stays on To deactivate the function touch Ed The previous heat setting comes on When you deactivate the hob you also deactivate this function 4 10 The Child Safety Device This function prevents an accidental operation of the hob To activate the function activate the hob with Do not set the heat setting Touch Ed for 4 seconds 2 comes on Deactivate the hob with CD To deactivate the function activate the hob with CD Do not set the heat setting Touch for 4
18. seconds 0 comes on Deactivate the hob with CD To override the function for only one cooking time activate the hob with D comes on Touch El for 4 seconds Set the heat setting in 10 seconds You can operate the hob When you deactivate the hob with O the function operates again 4 11 OffSound Control Deactivation and activation of the sounds Deactivate the hob Touch D for 3 seconds The display comes on and goes out Touch Ed for 3 seconds Or comes on Touch of the timer to choose one of the following the sounds are off the sounds are on To confirm your selection wait until the hob deactivates automatically When the function is set to 8 you can hear the sounds only when you touch O Minute Minder comes down Count Down Timer comes down you put something on the control panel 4 12 Power management function e Cooking zones are grouped according to the location and number of the phases in the hob See the illustration e Each phase has a maximum electricity loading of 3700 W e The function divides the power between cooking zones connected to the same phase e The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W e The function decreases the power to the other cooking zones connected to the same phase The heat setting display of the reduced zones changes between two levels 5 HINTS
19. t put cutlery or saucepan lids on the cooking zones They can become hot Do not operate the appliance with wet hands or when it has contact with water Do not use the appliance as a work surface or as a storage surface If the surface of the appliance is cracked disconnect immediately the appliance from the power supply This to prevent an electrical shock Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation When you place food into hot oil it may splash WARNING Risk of fire and explosion Fats and oil when heated can release flammable vapours Keep flames or heated objects away from fats and oils when you cook with them The vapours that very hot oil releases can cause spontaneous combustion Used oil that can contain food remnants can cause fire at a lower temperature than oil used for the first time Do not put flammable products or items that are wet with flammable products in near or on the appliance WARNING Risk of damage to the appliance Do not keep hot cookware on the control panel Do not let cookware to boil dry Be careful not to let objects or cookware fall on the appliance The surface can be damaged Do not activate the cooking zones with empty cookware or without cookware Do not put aluminium foil on the appliance www aeg com Cookware made of cast iron aluminium or with a damaged bottom can cause scra
20. tches on the glass glass ceramic Always lift these objects up when you have to move them on the cooking surface This appliance is for cooking purposes only It must not be used for other purposes for example room heating 2 4 Care and cleaning Clean regularly the appliance to prevent the deterioration of the surface material Deactivate the appliance and let it cool down before you clean it Disconnect the appliance from the electrical supply before maintenance Do not use water spray and steam to clean the appliance Clean the appliance with a moist soft cloth Only use neutral detergents Do 3 PRODUCT DESCRIPTION 3 1 Cooking surface layout 14 P u 0 3 5 8 10 14 P not use abrasive products abrasive cleaning pads solvents or metal objects 2 5 Disposal WARNING Risk of injury or suffocation Contact your municipal authority for information on how to discard the appliance correctly Disconnect the appliance from the mains supply Cut off the mains cable and discard it 2 6 Service To repair the appliance contact an Authorised Service Centre Use original spare parts only Induction cooking zone Control panel 0 3 5 8 10 J Hn MP 0 3 5 8 10 MP PO ENGLISH 7 Use the sensor fields to operate the appliance The displays indicators and sounds tell which functions operate Sensor Function Comment field
21. y escalope veal cor asnec Turn halfway through don bleu cutlets rissoles essary sausages liver roux eggs pancakes doughnuts 12 13 Heavy fry hash browns loin 5 15 Turn halfway through steaks steaks 14 Boil water cook pasta sear meat goulash pot roast deep fry chips P Boil large quantities of water Power function is activated 6 CARE AND CLEANING WARNING Refer to Safety chapters 6 1 General information Clean the hob after each use e Always use cookware with clean bottom e Scratches or dark stains on the surface have no effect on how the hob operates Use a special cleaner applicable for the surface of the hob Use a special scraper for the glass 6 2 Cleaning the hob Remove immediately melted plastic plastic foil and food with sugar If not the dirt can cause damage to the hob Put the special scraper on the glass surface at an acute angle and move the blade on the surface Remove when the hob is sufficiently ENGLISH 13 Clean the hob with a moist cloth and some detergent After cleaning rub cool limescale rings water rings fat stains shiny metallic discoloration WARNING 7 TROUBLESHOOTING Refer to Safety chapters 7 1 What to do if Problem You cannot activate or oper ate the hob Possible cause The hob is not connected to an electrical supply or it is connected incorrectly the hob dry with a soft cloth Remedy
22. y result in fire Never try to extinguish a fire with water but switch off the appliance and then cover flame e g with a lid or a fire blanket 4 www aeg com Do not store items on the cooking surfaces Metallic objects such as knives forks spoons and lids should not be placed on the hob surface since they can get hot Do not use a steam cleaner to clean the appliance After use switch off the hob element by its control and do not rely on the pan detector If the glass ceramic surface glass surface is cracked switch off the appliance to avoid the possibility of electric shock If the supply cord is damaged it must be replaced by the manufacturer an authorized Service or similarly qualified persons in order to avoid a hazard 2 SAFETY INSTRUCTIONS 2 1 Installation WARNING Only a qualified person must install this appliance Remove all the packaging Do not install or use a damaged appliance Obey the installation instruction supplied with the appliance Keep the minimum distance from the other appliances and units Always be careful when you move the appliance because it is heavy Always wear safety gloves Seal the cut surfaces with a sealant to prevent moisture to cause swelling Protect the bottom of the appliance from steam and moisture Do not install the appliance adjacent to a door or under a window This prevents hot cookware to fall from the appliance when the door or the window is open

Download Pdf Manuals

image

Related Search

Related Contents

  Etudiants mode d`empLoi L`opéra vous dit tout ! BullEtins d  IM. BEB-600-T  cf Mode d`emploi  Sea Gull Lighting 4325-68 Installation Guide    

Copyright © All rights reserved.
Failed to retrieve file