English
Contents
1. Input tray 1 Output tray 1 Scrap box 1 Paper slider 1 CD ROM 1 Before Using this Unit 1 Installed inside the turning unit Notes e Be careful when lifting the unit out of the box to avoid back injuries e We recommend storing the box and packaging materials after unpacking as they can be used when transporting the unit e When transporting the unit remove the print paper from the unit beforehand Failure to remove these items before transport may result in malfunctions Installation Removing the Blind Plate from the Bottom of the Printer Carefully place the printer Loosen the thumbscrew and Store the removed blind plate upside down remove the blind plate from and thumbscrew the bottom of the printer Notes For details on printer operations refer to the user s manual supplied with the printer Be sure to turn off the printer before connecting it to the unit Connecting the Printer to the Unit Check the locations of the Check that the connection Place the printer on the unit connection points on the hooks on the unit shown from above while aligning the bottom of the printer and the above are open positions of the guide pins holes in which the guide pins with the holes will be inserted shown above TALL Check that the guide pins Raise the connection hooks on both sides are inserted and secure the connection in the holes at the bottom hook screws of the2. Q Obey Prohibited Do not look into the output slot at close range Print sheets are ejected from the output slot Contact with ejected print sheets may result in injury or blindness Do not look into the memory card slot at close range Ejected cards may result in injury or blindness Do not get your hands or fingers caught when opening and closing the maintenance lid Doing so may result in injury Do not touch the connections cord s connector with wet hands Connecting or disconnecting the cord s connector with wet hands may result in electric shock Turn off the connected printer before performing maintenance Failure to do so may result in electric shock Do not install the output tray in locations where it may obstruct human traffic Installing the unit in locations where the output tray juts out into paths frequented by people may result in accidental bumps Overview Features The OP TU80X Turning Unit is a duplex printing option for use with the DP DS80D Digital Photo Printer Using this unit in conjunction with the DP DS80D allows printing on both sides of print sheets Duplex printing can be performed on cut sheets loaded into the OP TU80X Simplex printing can be performed on paper rolls loaded into the DP DS80D The ink ribbon loaded into the DP DS80D is used for both processes Notes This unit is intended for use with the DP DS80D Always use the unit in conjunctio
3. and then turn it on again The jammed paper will be cut and ejected automatically into the scrap box within about 1 minute If the paper jam is not cleared after repeating method several times refer to the following illustrations to remove the jammed paper Cleaning roller Guide tab Loosen the maintenance lid Open the maintenance lid Hold the guide tab and lift it until screws the guide locks Remove the jammed paper carefully If the jammed paper is not visible from the maintenance lid open the mechanical unit of the printer and remove the ribbon cassette before removing the jammed paper If the paper jam is not cleared with methods to refer to the troubleshooting section in the user s manual supplied with the printer and check the interior of the printer Notes Do not open the maintenance lid while printing is in progress Doing so will stop the printing operation After you finish clearing the paper jam be sure to close the guide and maintenance lid Be sure to secure the maintenance lid screws tightly 18 Specifications Operating temperature 5 C to 35 C Operating humidity 35 to 80 non condensing Dimensions excluding protrusions 322 x 500 x 248 mm W x D x H Weight Approx 15 kg turning unit only Memory card slot SD card 1 Used only for servicing and not for normal operation Supplied accessories Input tray 1 Output tray 1 Scrap box 1 Paper slider 1 CD
4. death Always transport the unit with two or more people Carrying the unit alone may result in lower back and other injuries due to the weight of the unit Obey Do not install or operate the unit in locations with excessive oily smoke steam humidity or dust Installing the unit in the above types of locations may result in electric shock Operating the unit in a location that does not meet the conditions described in this manual Prohibited may result in electric shock or injury Prohibited Do not operate the unit in locations exposed to water Exposure to water may result in electric shock due to electrical leakage Never wet Prohibited Do not damage the connection cord Damaging the connection cord may result in electric shock e Do not pinch the cord between the unit and any wall rack shelf etc e Do not modify or damage the cord e Do not place heavy objects on or pull on the cord e Always hold the cord by its connector when disconnecting the cord e Keep the cord away from heaters and do not apply heat to the cord If the connection cord is damaged contact your dealer or a service representative about a replacement Do not allow water or foreign objects to enter the unit Doing so may result in electric shock If water or foreign objects enter the unit disconnect the printer s power cord from the power outlet immediately and contact your dealer or a ser
5. result in injury or damage to surrounding property due to electric shock or other accidents Caution symbols AAA Caution Electric Hand shock caution Prohibited actions Q Prohibited Never dismantle Ve W N Wet hand Never wet caution Instructions Obey To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only This product shall not be used in the residential area For the Customers in the U S A Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense For the Customers in Europe This is a Class A product In a domestic e
6. DNP TURNING UNIT OP TU80X Operating Instructions 2014 Dai Nippon Printing Co Ltd 3 00D 317 12 1 Safety Precautions This product is designed with proper safety considerations in mind However as with all electronic appliances improper operation may result in accident severe injury or death due to fire electric shock etc To reduce the risk of accidents be sure to adhere to the following Follow the safety precautions Carefully read the safety precautions on pages 5 and 6 Perform periodic inspections We recommend performing periodic inspections to ensure prolonged and safe use For details on inspections and costs contact a service representative Discontinue use in the event of malfunction Contact a service representative immediately in such cases If the following errors occur e Smoke is emitted e Unusual sounds or odors are emitted e Water or foreign objects enter the unit s interior e The unit is dropped or the cabinet is damaged 4 1 Disconnect the power cord and connection cord 2 Contact your dealer or a service representative Warning indications The following indications are used in this document and on this product Be aware of the meanings of these indications and read the following carefully N warnine Failure to obey these warnings may result in severe injury or death due to fire or electric shock AN caution Failure to obey these warnings may
7. ROM 1 Before Using this Unit 1 Dedicated print media not supplied DP DS80DX MEDIA SET 8 x 12 Ink ribbon 8 x 12 in prints 110 images Print paper 55 sheets per pack 203 x 348 mm paper size DP DS80DX MEDIA SET 8 x 10 75 Ink ribbon 8 x 10 75 in prints 130 images Print paper 65 sheets per pack 203 x 311 mm paper size Power is supplied to the unit from the connected DP DS80D via a dedicated cable This unit is a duplex printing option for use with the DP DS80D Digital Photo Printer Do not use the unit with any other device Design and specifications are subject to change without notice e Be sure to verify operation before use Dai Nippon Printing will not be liable for prints and recorded data that result from malfunctions that occur during operation of the unit printer recording media external storage and other devices e Dai Nippon Printing will not be liable for any loss of profits or other losses due to malfunctions or other reasons during or after the warranty period 19 Dai Nippon Printing Co Ltd
8. he paper size cannot be detected properly and paper jams may result 8 x 10 75 in position for DP DS80DX MEDIA SET 8 x 10 75 14 Protective sheets are inserted at the top and bottom of each package of print paper These sheets prevent dust contamination during print paper replacement Remove the print paper from the package including the protective sheets and place it in the input tray Insert the paper so that the edge of the paper is placed under the tab on the paper size stopper Insert the input tray inside the Attach the scrap box turning unit e Touching the surface of the print paper will result in fingerprint contamination and reduced print quality e Do not load more than one pack s worth of print paper into the input tray Doing so may result in paper jams In addition be sure to load the print paper so that the paper is completely within the tray and does not protrude Failure to do so may result in paper jams e Always attach the scrap box to prevent scraps of paper from falling inside the unit e The protective sheets are ejected during printing Loading Ink Ribbons Load the new ribbon in the ribbon cassette Rotate the ribbon in the direction of the arrow and remove any slack in the ribbon k Take up side white Supply side black 15 Load so that the supply pacino tis comparment side black is in the front Close the mechanical unit Notes For de
9. n with the DP DS80D The unit cannot be connected and used with the DS80 For details on printer operations refer to the user s manual supplied with the printer DP DS80D rer B _ ne _ _ OP TU80X Parts Identification D Maintenance lid screws Use these when opening or securing the maintenance lid Maintenance lid Open this to perform maintenance on the cleaning roller or to clear paper jams Output slot Printed sheets are ejected from here Scrap box Blank areas of printed images are cut off and collected in this box Guide pins These guide the printer into the proper position for connection Paper guide Paper passes through here during printing Connection hooks left and right These secure the printer to the unit Connection hook screws left and right Use these when securing the connection hooks Communication cable Use this to connect the printer to the unit SD card slot used for servicing SD card slot used for servicing This is not used during normal operation Notes e This SD card slot is intended for use in servicing only Dai Nippon Printing will not be liable for any recorded media or data that is lost through use of this slot e Do not insert foreign objects into the SD card slot Preparation Checking the Components Check that the unit and all the following accessories are included in the package
10. nvironment this product may cause radio interference in which case the user may be required to take adequate measures The manufacturer of this product is Dai Nippon Printing Co Ltd 1 1 1 Ichigaya Kagacho Shinjuku ku Tokyo 162 8001 Japan The importer for R amp TTE and RoHS is DNP PHOTO IMAGING EUROPE SAS ZI PARIS NORD II BP 5 1077 22 AVENUE DES NATIONS PARC SILIC VILLEPINTE 95948 ROISSY CDG CEDEX FRANCE If you want to dispose this product do not mix with general household waste There is a separate collection system for used electronics products in accordance with legislation under the WEEE Directive Directive 2012 19 EU and is effective only within European Union For details consult your dealer WARNING for connected printer The printer must be earthed For pluggable equipment the socket outlet be installed near the equipment and shall be easily accessible To disconnect the main power unplug the AC IN connector When installing the unit incorporate a readily accessible disconnect device in the fixed wiring or connect the power plug to an easily accessible socket outlet near the unit If a fault should occur during operation of the unit operate the disconnect device to switch the power supply off or disconnect the power plug Use a proper power cord for your local power supply 1 Use the approved Power Cord 3 core mains lead Appliance Connector Plug with earthing contacts that conforms
11. printer Notes e Avoid getting your fingers caught when placing the printer on the unit e Keep your hands away from the open lever when carrying the printer Carrying the printer by the open lever may result in malfunctions Open lever 10 Notes e Be careful when moving the printer or when connecting the printer to the unit Dropping the printer may result in injuries or malfunctions e When placing the printer on the unit make sure the guide pins are inserted into the printer e If you want to move the units after installation always disconnect the printer from the unit and move the units separately Communication cable port Connect the communication cable to the communication cable port on the printer Notes The connector of the communication cable and the port must align properly Check the pin positions and Communication cable Indentation Protrusion 11 Connecting to a Computer USB cable Power supply port Power cord supplied with printer Notes For details on printer connection refer to the user s manual supplied with the printer Attaching the Output Tray and Paper Slider Attaching the output tray Attaching the paper slider Insert in the grooves on the Attach from above inside of the output tray Attach to the scrap box on the printer 12 Precautions for Installation Refer to the illustration to the left to attach and use the out
12. put tray properly e Do not install the unit in the following types of locations Locations exposed to excessive vibration from nearby equipment Locations with high humidity Locations with excessive dust Locations exposed to direct sunlight Locations exposed to extreme high or low temperatures e To prevent the printer from overheating do not obstruct the ventilation holes with cloth or other objects Overheating due to blocked ventilation holes may result in fire or malfunction e When printing with paper rolls the printed sheets may not accumulate in the output tray in some cases due to curling in the sheets In addition do not allow more than 30 printed sheets to accumulate in the output tray as doing so may result in paper jams e When using the turning unit OP TU80X do not set only the flange of a paper roll in the printer DP DS80D 13 Loading Print Paper Load print paper as follows Handle Remove the scrap box Pull out the input tray by its handle Use your other hand to support the input tray when removing the input tray WE Paper size stopper Adjust the position of the paper size stopper according to the size of the paper you are using as illustrated to the left Remove the paper size stopper and attach the tabs to adjust its position 8 x 12 in position for DP DS80DX MEDIA SET 8 x 12 If the paper size stopper is not positioned properly t
13. tails on loading media in the printer refer to the Printer Setup section in the user s manual supplied with the printer Printing When preparation is complete set the power switch on the printer to ON Power switch When initialization is complete the POWER LED on the printer will light and the printer will be ready to print Replacement of print media 1 e ink ribbons and print paper can also be performed while the printer is turned on 16 Miscellaneous Cleaning the Cleaning Roller The cleaning roller removes dust and other particles from print paper surfaces during printing If dust and other particles appear frequently on printed images clean the cleaning roller to restore its ability to remove dust Cleaning roller Guide tab Turn off the printer and Open the maintenance lid Hold the guide tab and lift it until loosen the maintenance lid the guide locks screws Wipe the cleaning roller with a cloth dampened with ethanol while rotating the roller Notes Do not open the maintenance lid while printing is in progress Doing so will stop the printing operation After maintenance is complete be sure to close the guide and maintenance lid Be sure to secure the maintenance lid screws tightly 17 Clearing Paper Jams If a paper jam occurs during duplex printing use methods to to clear the jam If you cannot clear the paper jam contact your dealer Turn off the printer
14. to the safety regulations of each country if applicable 2 Use the Power Cord 3 core mains lead Appliance Connector Plug conforming to the proper ratings Voltage Ampere If you have questions on the use of the above Power Cord Appliance Connector Plug please consult a qualified service personnel or the distributor Table of Contents VAIO a a da ee a ea ct tg ta D a D ie 5 COUTO cae e E T E E E 6 OO E E EE EEEE T PeO aa E E E E E EOE E AEE ET 7 Parts Identificati OMe O r O SE OENE 8 BT TO A ARO E E E ae in E EE 9 Checking the Components eserse EN NEEE EEEE EENE EN EEEIEE 9 AO DER E E E E A E R EA 10 Removing the Blind Plate from the Bottom of the Printer ccccccccccccceceeeeeeeeeeseseeeeeeeeeeeeeeeeeaaas 10 Connecting the Printer to the tin nacre tee tendent 10 COMMECE ID 0 Comp eE eea D cdtbeh ten intel coche ele cb ide le core 12 Attaching the Output Tray and Paper Slider ss 12 Precautions for MSA AO ete de ae auction tiens 13 RUN OMe ccs E ie cae eine gets oasis sada dens E A 14 AU PAPAS E E ENEE es an De ee di doi 14 Loading TVIRD DOIG a de nn io ei 15 PONN e T mai enasmalaaneeisea E 16 VIS CONAMCOUS i ea ta e E E E 17 Clcamino he lle ini thea ROUGE a E EERE 17 CCE Pane T OS ne E N e de nr tete 18 oS ofe1 61 let2 11 8 hae enn ee nee eee nee ne ess eee ee een nee ne re ee ere ern eter ener 19 A A Failure to obey the following may Prohibited result in electric shock severe injury or
15. vice representative Do not move the printer while it is connected Moving the printer while it is connected may result in injuries due to the printer or this unit dropping When moving the unit always disconnect the connection cord and remove the printer beforehand Do not dismantle or modify the unit Doing so may result in electric shock or injury Contact your dealer or a service representative for inspections of the units interior and repairs LE Never dismantle AN caution Failure to obey the following may result in injury or damage to surrounding property A EES Be careful to avoid getting hands caught Be careful when placing the printer onto this unit for Hand caution connection and avoid getting your fingers caught between the devices Do not install the unit in unstable locations Installing the unit on an Prohibited unstable surface or a surface that is not level may result in injury due to drops Be sure to verify the sturdiness of the surface before installation Always run cables properly Improperly placed connection cords may result in injury due to tripping and drops Run the cables so that they will not be in acs a way UE Obey Do not stand on or place heavy objects on the unit Doing so may result in PROMIBREN injuries due to falls or damage to the unit Prohibited Prohibited Hand caution Y caution D m gt Q
Download Pdf Manuals
Related Search