LCS1 C01 User Manual
Contents
1. room rain Trimer T1 enables sensitivity adjustment Default setting of trimmer is set to middle position In case adjustment to local conditions is needed turn trimmer to the right clockwise for early detector response For late detector response turn trimmer to the left anticlockwise Detector indicates its state with two LED s Green LED1 indicates detector is powered red LED2 indicates presence of dew detection see Table 3 a Additional equipment LCS 1 C01 Condensation detector SMARTTEH LIVING SYSTEMS 2 FEATURES D KT Figure 1 LCS 1 C01 Condensation detector Table 1 Technical data wide power supply range 10 24 V AC DC output volt free contact operation LED indication dew LED indication provided spring for on pipe mounting a Additional equipment LCS 1 C01 Condensation detector SMARTTEH LIVING SYSTEMS 3 INSTALLATION 3 1 Connection scheme Figure 2 Connection scheme LED1 power indication A ee L Ae m T1 LED2 dew indication sensitivity adjustmemt Figure 3 Connection scheme for single sensor m Power supply WE Power supply volt free conntact positive volt free conntact negative i 3 Additional equipment LCS 1 C01 Condensation detector SMARTTEH2. LIVING SYSTEMS Figure 4 Connection scheme for multiple sensor s Power supply Power supply volt free conntact positive volt free conntact negative Table 2 Flying lead wires Yellow yl 24V 24 v AC DC Power supply Brown br 24V 24 v AC DC Power supply Green gr 24vDC 24 V DC positive NC volt free contact White wh OVDC 0 V DC negative NC volt free contact Table 3 LEDs amp Trimmers On power supply present LED1 Green LED indicates power presence Off no power supply On dew present output contacts open LED2 Red LED indicates dew presence Off no dew output contacts closed rotating clockwise increasing sensitivity H SENSE Se rotating anticlockwise decreasing sensitivity NOTE When wiring several sensors to one input output of detector must be connected serially see Fig 4 3 a Additional equipment LCS 1 C01 Condensation detector SMARTTEH LIVING SYSTEMS 3 2 Mounting instructions Figure 3 Housing dimensions 33 44 78 gt pi 78 e Dimensions in millimeters All connections module attachments and assembling must be done while module is not connected to the main power supply Mounting instructions The condensati
3. a A e amp SMARTEH LIVING SYSTEMS USER MANUAL Additional equipment LCS 1 C01 Condensation detector SMARTEH d o o Trg tigrovcev 1 5220 Tolmin Slovenia Tel 386 0 5 388 44 00 e mail info smarteh si www smarteh si a Additional equipment LCS 1 C01 Condensation detector SMARTTEH LIVING SYSTEMS Written by SMARTEH d o o Copyright 2005 SMARTEH d o o User Manual Document Version 003 May 15 2007 a Additional equipment LCS 1 C01 Condensation detector SMARTTEH LIVING SYSTEMS STANDARDS AND PROVISIONS Standards recommendations regulations and provisions of the country in which the devices will operate must be considered while planning and setting up electrical devices Work on 230 VAC network is allowed for authorized personnel only DANGER WARNINGS Devices or modules must be protected from moisture dirt and damage during transport storing and operation WARRANTY CONDITIONS For all modules LONGO LCS 1 if no modifications are performed upon and are correctly connected by authorized personnel in consideration of maximum allowed connecting power we offer warranty for 24 months from date of sale to end buyer In case of claims within warranty time which are based on material malfunctions the producer offers free replacement The method of return of malfunctioned module together with description can be arranged with our authorized representative Warranty does not
4. ibility that the product Productitest object Longo condensation detector Trademark LCS 1 C01 Model type reference LCS 1 C01 to which this declaration relates is in conformity with the following directives and or standards Directives 89 336 EEC Electromagnetic compatibility EMC TH23 EEC Low voltage equipment LVD Test standards EMC EN 60945 1997 LVD IEC 61010 1 2001 Authorised Signature Place Date of issue Miroslav rv General Manager Tolmin 25 04 2005 Lan SMARTEH LIVING SYSTEMS SMARTEH d 0 0 Tra tigrovcev 1 5220 Tolmin Slovenia tel 386 0 5 388 44 00 e mail infoesmarteh s a Q www smartel si a e SMART E SMARTEH doe
5. include damage due to transport or because of unconsidered corresponding regulations of the country where the module is installed This device must be connected properly by the provided connection scheme in this manual Misconnections may result in device damage fire or personal injury Hazardous voltage in the device can cause electric shock and may result in personal injury or death NEVER SERVICE THIS PRODUCT YOURSELF gt gt If the unit is used in a manner not specified by the manufacturer the degree of protection provided by the equipment may be impaired LONGO Condensation detector LCS 1 C01 complies to the following standards EMC EN 60945 1997 LVD IEC 61010 1 2001 MANUFACTURER SMARTEH d o o Trg tigrovcev 1 5220 Tolmin Slovenia a Additional equipment LCS 1 C01 Condensation detector SMARTTEH LIVING SYSTEMS Index Additional equipment LCS 1 C01 Condensation detector 1 DESCRIPTION ans au 1 KN TE 2 3 INSTALLATION ed an 3 Kee Eu 3 3 2 Mounting instructions ssessessesecssssecseesecseeseoseoseeseosresseseesees 5 4 TECHNICAL SPECIFICATIONS ee 6 5 NOTE A RA 7 iii g aa Additional equipment LCS 1 C01 Condensation detector SMARTEH i 3 LIVING SYSTEMS 1 DESCRIPTION The LCS 1 C01 condensation detector in combination with the input output unit is used to avoid condensation on pipes or on the surface of cooling ceiling elements and with this preventing
6. on detector should be mounted on the coldest spot of the cooling area or directly on the chilled water supply inlet pipe The condensation detector housing should have good thermal contact to the measured surface Use of thermo contact grease between detector and measuring surface is recommended Before mounting make sure that the surface is completely clean and dry Don t paint the condensation detector and avoid contact with other metal pieces 1 Mount LCS 1 C01 detector on the measuring surface On pipe fixing should be performed with spring provided 2 Connect wires to input output unit 3 g aa Additional equipment LCS 1 C01 Condensation detector SMARTEH 3 LIVING SYSTEMS 4 TECHNICAL SPECIFICATIONS Table 5 Technical specifications Supply voltage 10 24 V AC DC Consumption mA Max 15 Output type Transistor NC Output current mA Max 15 internally limited Dimensions L x W x H mm 78x44x11 Weight g 60 Wire length connection m 2 Ambient temperature C 0 to 50 Transport and storage temperature C 20 to 60 a Additional equipment LCS 1 C01 Condensation detector SMARTTEH LIVING SYSTEMS 5 NOTES a Additional equipment LCS 1 C01 Condensation detector SMARTTEH LIVING SYSTEMS EC Declaration of Conformity Company manufacturer Smarteh doo Address Trg tigrovcev 1 5220 Tolmin Slovenija Declares under its sole respons
Download Pdf Manuals
Related Search