GlossTector - SaluTron Messtechnik GmbH
Contents
1. of measure area 11x54 mm Environment temperature 0 C 40 C Relative humidity less than 85 Dimension 142 mm x32 mm x64 mm Dimension of standard board 67 mm x 46 mm x 13 mm Weight 320 g 5 Operation instruction Pressing the operate button starts measurements or performs functions that are displayed Press the key of the angle s choice In common use the 60 angle For measuring of high gloss select for use 20 The 85 is to be selected for measurements on surfaces with low gloss There is always to be used the black standard board box for adjusting Place the instrument on standard board with a black glass The under part of the device signed A must aim the other one A of the standard box Adjusting standard Regulate the scroll wheel on the right until the reading on screen accords to given value at the standard board box Please note that the standard board must be kept clean for guarantee of accurate measurement Testing Pay attention to not move the wheel again Put the instrument on other standard board from white box The difference between the displayed value and given one in the box should not be greater than 1 5 GU Measuring Put the GlossTector on the object then read the value displayed on the screen Measurement with different angles select the other angle by pressing a key and repeat the steps above 6 Safety instructions Avoid direct strong light while using otherwise it can influence2. cANIK SaluTron GmbH J e Sesser GlossTector 3 angle unit 20 60 85 SaluTron Standard Board U Operation manual 1 General information Thank you for purchase of our gloss meter This device is designed and manufactured according to internatioanal standard ISO 2813 ASTMD 523 and DIN 67530 The technical parameters meet the JJG 696 2002 The GlossTector can be used to determine the gloss level of paint coatings plastic ceramics and metal surfaces 2 Applications Measurement of paint and dope surface gloss on car electronic appliance and musical instrument industry Measurement of floor board marble granite and ceramic tile gloss on architecture decoration industry Measurement of printing ink and paper in printing and casing industry Hard drawn aluminium alloys 3 Features Small and light and easy to use Small power consumption 1 5 V alkaline attery can be used for almost 60 hours and 100000 reading High stability Long term stable light source do not need be replaced for ever Quartz crystal standard board no excursion 4 Technical data Measure range 0 199 9 GU Stability less than 0 4 GU 30 min Readout error less than 1 5 GU Power supply 1 5 V AA alkaline battery Voltage 0 8 V 1 5 V Measurement units are equipped with standard geometries of 20 60 or 85 Facula dimension 20 10x10 mm 60 10x20 mm 85 7x24 mm Dimensions
3. the accuracy of measuring Keep the standard boards clean be sure not to touch the surface with the finger and polish with the lens paper or absolute alcohol Any type of spots on the surface will cause the measuring error Verify regular the adjusting by making of control measurements on standard boards The low capacity of the battery is signalized by red light on the top of the device In this case replace the power battery with a new one Is the adjusting of the instrument on standard boards not possible the optics lens of instrument can be polluted seriously Try to polish the optic lens with lens paper and absolute alcohol The given values of the standards may change due to environmental influences For this reason it is recommended regular ones a year to send the device with standards boards for inspection and calibration to the manufacturer 7 Sales Service For further questions we are always at your disposal 8 Standard Scheme e Device GlossTector e Two standard board boxes e Battery e Certificate of quality e User manual e Duster e Carry case SaluTron Messtechnik GmbH Dr Gottfried Cremmer Alle 30 7 D 50226 Frechen Tel 49 0 2234 9999960 Fax 49 0 2234 2534977 info salutron de www salutron de
Download Pdf Manuals
Related Search