Nokia Luna User Guide
Contents
1. In some devices you may need to make the connection separately after pairing Pair and connect the headset to two phones When you use the headset for the first time it automatically pairs and connects to your phone You can also connect your headset to another phone and manage calls from for example both your personal and your work phones at the same time 1 Make sure Bluetooth is activated on both phones 2 To switch the headset off press and hold the multifunction key for 5 seconds 3 Press and hold the multifunction key for 5 seconds to activate pairing mode and pair the headset with the second phone 4 Switch the headset off and back on The headset connects to both phones Make and receive calls To make and receive calls using your headset you need to connect it to your phone Make a call Make a call in the normal way Answer a call Remove the headset from the cradle End a call Press the headset into the cradle or press the multifunction key Reject a call Press the headset into the cradle or press the multifunction key twice Switch a call between your headset and phone Press and hold the multifunction key for 2 seconds You can redial the last called number or use voice dialling if your phone supports these features with the headset Redial the last called number When no call is in progress press the multifunction key twice Use voice dialling When no call is in progress press and hold the multi2. 1 Microphone 2 Earpiece 3 Charging indicator light 4 Cradle 5 Charger connector 6 NFCarea 7 Bluetooth indicator light 8 Multifunction key Charge the battery Before using the headset you must charge the battery n Warning Use only chargers approved by Nokia for use with this particular model The use of any other types may invalidate any approval or warranty and may be dangerous Use of unapproved chargers may present a risk of fire explosion or other hazard 1 Connect the charger to a wall outlet 2 Place the headset in the cradle 3 Connect the charger cable to the charger connector in the cradle The red charging indicator light switches off when the battery is fully charged 4 Disconnect the charger from the cradle then from the wall outlet When you unplug a charger hold and pull the plug not the cord The fully charged battery has power for up to 2 hours of talk time and up to 35 hours of standby time If you keep the headset in the cradle the standby time is up to 2 months When the battery charge is low you hear a voice prompt In addition a red indicator light flashes and the headset beeps every 5 minutes If you have deactivated voice prompts the headset beeps every 5 minutes Check the battery charge With your headset switched on and connected to your phone press the multifunction key A green light indicates a sufficient charge level If the light is yellow you may need to recharge the batte
3. Nokia Luna User Guide Issue 1 0 Introduction About your headset With the Nokia Luna Bluetooth Headset you can handle calls hands free even when you are using two phones at the same time Remove the headset from the cradle and it s instantly ready for use The surface of this product is nickel free n Warning This product may contain small parts Keep them out of the reach of small children Parts of the product are magnetic Metallic materials may be attracted to the product Do not place credit cards or other magnetic storage media near the product because information stored on them may be erased Read this user guide carefully before using the product Also read the user guide for the device that you connect to the product For more information go to www nokia com support About Bluetooth connectivity You can use Bluetooth to make a wireless connection to other compatible devices such as mobile devices Devices do not need to be in direct line of sight but they must be within 10 metres 33 feet of each other The connection may be affected by obstructions such as walls or other electronic devices This device is compliant with Bluetooth Specification 2 1 EDR supporting the following profiles Headset Profile 1 1 and Hands Free Profile 1 5 Check with the manufacturers of other devices to determine their compatibility with this device Get started Keys and parts 11 0 E o AN 6
4. arate collection at the end of their working life This requirement applies in the European Union Do not dispose of these products as unsorted municipal waste For more environmental information see the product Eco profile at www nokia com ecoprofile Copyright and other notices DECLARATION OF CONFORMITY Hereby NOKIA CORPORATION declares that this Nokia Luna product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com phones declaration_of_conformity Nokia Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation Nokia tune is a sound mark of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners 2011 Nokia All rights reserved Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice The contents of this document are provided as is Except as required by applicable law no warranties of any kind either express or implied including but not limited to the implied warranties of
5. but you can only connect it to a maximum of 2 phones at the same time With some phones you may need to make the connection separately after pairing When the headset is connected to a phone the Bluetooth indicator light flashes slowly Pair and connect the headset using NFC With Near Field Communication NFC you can pair and connect your headset to your compatible phone easily If the compatible phone supports NFC activate its NFC feature remove the headset from the cradle and touch the NFC area of the cradle with the NFC area of your phone The headset connects to the phone automatically You can also disconnect the headset using NFC For details on NFC see the user guide of the phone If the phone does not support NFC pair the headset manually Pair the headset manually 1 Make sure your headset is switched off and your compatible phone on 2 Ifyou have never paired the headset with a device or you have cleared the pairings switch the headset on If you have previously paired your headset with another device press and hold the multifunction key for 5 seconds Pairing mode is activated and a blue indicator light starts to flash quickly Follow the voice prompts 3 Within 3 minutes activate Bluetooth on the phone and set it to search for Bluetooth devices For details see the user guide of the phone 4 Onyour phone select the headset from the list of found devices 5 If required enter the passcode 0000
6. ct it If the battery is completely discharged it may take several minutes before the charging indicator is displayed When your charger is not in use unplug it from the electrical plug and the device Do not leave a fully charged battery connected to a charger as overcharging may shorten the battery s lifetime If left unused a fully charged battery will lose its charge over time Always keep the battery between 15 C and 25 C 59 F and 77 F Extreme temperatures reduce the capacity and lifetime of the battery A device with a hot or cold battery may not work temporarily Do not dispose of batteries in a fire as they may explode Dispose of batteries according to local regulations Recycle when possible Do not dispose as household waste Use the charger for its intended purpose only Improper use or use of unapproved chargers may present a risk of fire explosion or other hazard and may invalidate any approval or warranty If you believe the charger is damaged take it to a service centre for inspection before continuing to use it Never use a damaged charger Only use the charger indoors Take care of your device Handle your device battery charger and accessories with care The following suggestions help you protect your warranty coverage Handle your device charger and accessories with care The following suggestions help you protect your warranty coverage Keep the device dry Precipitation humidity and all types of li
7. function key for 2 seconds and follow the instructions in the user guide of your phone Handle calls from two phones If your headsetis connected to two phones you can handle calls from both at the same time End an ongoing call and answer a call on another phone Press the multifunction key Put an ongoing call on hold and answer a call on another phone Press and hold the multifunction key for 2 seconds Switch between active and held calls Press and hold the multifunction key for 2 seconds End an ongoing call and activate a held call Press the multifunction key If you redial or use voice dialling the call is made on the phone you last had an active call on with the headset Change the volume Set the desired volume level on your connected phone The selected volume level is saved as the minimum volume level for that phone The headset remembers the set volume level for each connected phone separately Your headset adjusts the volume automatically according to the level of background noise Deactivate voice prompts 1 To switch the headset off press and hold the multifunction key for 5 seconds 2 Press and hold the multifunction key for 5 seconds Pairing mode is activated and a blue indicator light starts to flash quickly 3 Press and hold the multifunction key for 2 seconds You hear a voice prompt and a yellow indicator light flashes once Activate voice prompts 1 To switch the headset off press and hold
8. merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document Nokia reserves the right to revise this document or withdraw it at any time without prior notice To the maximum extent permitted by applicable law under no circumstances shall Nokia or any of its licensors be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused 10 The availability of particular products may vary by region Please check with your Nokia dealer for details This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited Issue 1 0 EN
9. quids or moisture can contain minerals that corrode electronic circuits If your device gets wet allow the device to dry Do not use or store the device in dusty or dirty areas Moving parts and electronic components can be damaged Do not store the device in high temperatures High temperatures can shorten the life of the device damage the battery and warp or melt plastics Do not store the device in cold temperatures When the device warms to its normal temperature moisture can form inside the device and damage electronic circuits Do not attempt to open the device Unauthorised modifications may damage the device and violate regulations governing radio devices Do not drop knock or shake the device Rough handling can break internal circuit boards and mechanics Only use a soft clean dry cloth to clean the surface of the device Do not paint the device Paint can clog moving parts and prevent proper operation Recycle Always return your used electronic products batteries and packaging materials to dedicated collection points This way you help prevent uncontrolled waste disposal and promote the recycling of materials Check how to recycle your Nokia products at www nokia com recycling Crossed out wheeled bin symbol A The crossed out wheeled bin symbol on your product battery literature or packaging reminds you that all electrical and electronic products batteries and accumulators must be taken to sep
10. ry soon If the light is red recharge the battery Switch the headset on or off Switch on Press the headset down to remove it from the cradle The headset switches on and a green indicator light flashes once The headset connects to the last connected phone If you have never paired the headset with a phone or you have cleared the pairings pairing mode is activated Switch off Place the headset in the cradle and press down on the headset to lock it into place The headset switches off and a red indicator light flashes once All active calls and connections are ended If not connected to a phone within 30 minutes the headset switches off Tip Don t have the cradle with you To switch the headset off press and hold the multifunction key for 5 seconds To switch the headset on press the multifunction key Wear the headset The headset comes with different sized earpads Select the earpad that fits the best and is the most comfortable for your ear To change the earpad gently pull the current earpad from the earpiece and push the new earpad into place Gently push the earpiece into your ear When you re not using your headset keep it in the cradle You can thread a wrist strap through the holes in the cradle and carry it with you easily Pair the device Pair and connect the headset to your phone Before using the headset you must pair and connect it to a compatible phone You can pair your headset with 8 phones
11. the multifunction key for 5 seconds 2 Press and hold the multifunction key for 5 seconds Pairing mode is activated and a blue indicator light starts to flash quickly 3 Press and hold the multifunction key for 2 seconds You hear a voice prompt and a green indicator light flashes once Clear the pairings 1 To switch the headset off press and hold the multifunction key for 5 seconds 2 Press and hold the multifunction key for 9 seconds The headset beeps twice and the red and green indicator lights alternate 3 Whenthe headset switches on pairing mode is activated Follow the voice prompts Product and safety information Battery and charger information This device has an internal nonremovable rechargeable battery Do not attempt to remove the battery from the device as you may damage the device This device is intended for use when supplied with power from the following chargers AC 16 The exact charger model number may vary depending on the type of plug The plug variant is identified by one of the following E X AR U A C K or B The battery can be charged and discharged hundreds of times but it will eventually wear out Talk and standby times are estimates only Actual times are affected by for example device settings features being used battery condition and temperature If the battery has not been used for a long time to begin charging you may need to connect the charger then disconnect and reconne
Download Pdf Manuals
Related Search