BCL3620 - Home Depot
Contents
1. Status Off Off Off Flashing In charging process battery pack capacity is lower than 25 Off Off Flashing On In charging process battery pack capacity is between 25 50 Off Flashing On On In charging process battery pack capacity is between 50 75 Flashing On On On In charging process battery pack capacity is between 75 100 On On On On Full charged Off Off Off Off One minute after full charge all LEDs are off charger LED is on with green color Eng Or MAINTENANCE AND REPAIR There are no user serviceable parts or adjustments inside the battery or charger Both should be returned to an authorised service centre for specialised attention nal Instruc A WARNING Risk of injury Service testing and repairs should only be carried out by authorised service centres We recommend our customer service department or authorised service centres CLEANING THE CHARGER A WARNING Unplug the charger power cord from power supply before cleaning at any time to prevent serious personal injury m Clean the charger surface except labels using a damp cloth with a mild detergent m Do not use any strong detergents on the plastic housing They can be damgaed by certain aromatic oil such as pine and lemon and by solvents such as kerosene m Moisture can cause a shock hazard Wipe off any moisture with a soft dry cloth m Use a small brush or the air discharge of a small2. RYOBI BCL3620 36 VOLT LITHIUM ION BATTERY CHARGER OPERATOR S MANUAL Original Instructions Eng Or INTENDED U This charger is only intended to charge Ryobi battery pack BPL3626 see specification table for details SAFETY INSTRUCTIONS This appliance is not intended for use by persons including children who may not be comepletely capable or who may lack experience knowledge and common sense necessary to operate the appliance safely Children should be supervised to ensure that they do not play with the appliance A WARNING When using the battery charger the following basic safety precautions should be observed for protection against electric shock danger of injury and burns Please read and observe these instructions before using the device m This charger is only to be used INDOORS under dry conditions m This charger is not intended to charge any other type of battery and should never be used in explosive or inflammable environments m Non rechargeable batteries cannot be charged with this battery charger m To protect against the risk of electrical shock do not immerse the unit cord or plug in water or other liquid m Before using the device check that the mains cord and mains plug are not damaged m The device must not be damp and it should not be used in a damp environment m Do not use the device if it has suffered any heavy shock or jolting or is damaged in any other way
3. m Due to the heat generated during charging the battery charger should not be operated on a combustible surface in an inflammable environment m Do not cover the ventilating slits m Never disassemble the device yourself Danger of an electric shock or fire could be caused by improper reassembly m When the appliance is not in use and before cleaning and maintenance unplug the appliance from the outlet m During charging the battery pack with charger must be placed in a well ventilates area Malfunction during charging can be caused by storing and operating in places where the temperature exceeds 40 C this should be avoided Battery charging in closed cupboards near heat sources radiators bright nal Instruc sunshine etc causes heat to accumulate and can damage the device Ifthe battery is not going to be used for a longer period pull the battery off the battery charger and pullout the mains plug Protect battery contacts to avoid a short circuit caused by a metallic object that can cause a fire or explosion Do not rivet or screw any name plates or signs onto the device The protective insulation can thereby be rendered ineffective Adhesive labels are recommended If the power cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard A WARNING Do not insert any object into the ventilation slots or charging connector Thi
4. Director of Outdoor Power Equipment Address Techtronic Industries Europe Middle East and Africa Medina House Field House Lane Marlow Bucks SL7 1TB United Kingdom Herewith we declare that the product Category 36 VOLT LITHIUM ION BATTERY CHARGER Model BCL3620 Serial number See product rating label Year of Constructo L LLL rain See product rating label is in conformity with the relevant provisions of the Machinery Directive 2006 95 EC 2004 108 EC And furthermore we declare that the following parts clauses of European harmonised standards have been used EN60335 1 EN60335 2 29 EN 61000 3 2 EN 61000 3 3 EN 55014 1 EN 55014 2 Place date Hong Kong 30 11 2010 Signature Andrew John Eyre BEng CEng MIET Vice President of Engineering SS as ae TECHTRONIC INDUSTRIES EMEA Medina House Field House Lane Marlow Bucks SL7 1TB United Kingdom RYOBI TECHNOLOGIES UK LIMITED Medina House Field House Lane Marlow Bucks SL7 1TB United Kingdom Tel 44 0 1628 894400 Fax 44 0 1628 894401 Technical Helpline 44 0 800 389 0305 TECHTRONIC INDUSTRIES FRANCE SAS Immeuble Le Grand Roissy Z A du Gu 35 rue de Guivry 77990 Le Mesnil Amelot France Phone 33 0 1 60 94 69 70 Fax 33 0 1 60 94 69 79 RYOBI BELGIUM Avenue des P querettes 55 Zoning artisanal b timent 5 B 1410 Waterloo Belgique Tel 32 0 2357 8140 Fax 32 0 2357 8149 TTI ITALIA SRL
5. only m Make sure the battery pack latch snaps into place and the battery pack is secured in the charger before beginning operation m Make sure the power cord is fully seated in the charger socket m Connect the charger to the power supply m Place the battery pack in the charger aligning raised rib on the battery pack with the groove in the charger m Slide in the battery pack to be sure contacts on the battery pack engage properly with contacts in the charger NOTE After charging is complete the charger LED will remain on with green color until the battery pack is removed from the charger or charger is disconnected from the power supply m The battery pack will become a lightly warm to the touch while charging This is normal and does not indicate a problem m Do not place the charger and battery pack in an area of extreme heat or cold They will work best at normal room temperature NOTE The charger and battery pack should be placed in a location where the temperature is more than 10 C but less than 38 C m When batteries become fully charged unplug the charger from the power supply and remove the battery pack m To remove the battery pack from the charger depress the battery pack latch BATTERY PROTECTION FEATURES Ryobi 36 V lithium ion batteries are designed with features that protect the lithium ion cells and maximize battery life If the tool stops during use release the trigger to reset and resume
6. operation If the tool still does not work the battery needs to be recharged CHARGER LED FUNCTIONS A WARNING If at any point during the charging process none of the LEDs are lit remove the battery pack from the charger to avoid damaging the product DO NOT insert another battery Return the charger and battery to your nearest service center for service or replacement LED LED INDICATOR BATTERY PACK ACTION Red color Green color Power Without battery pack ON Ready to charge battery pack Evaluate Hot battery pack Flashing 7 When battery pack reaches cooled temperature charger begins fast charge mode When battery pack reaches warmed temperature charger Evaluate Cold battery pack Flashing bagins fast charge mode P z Charger pre charges battery until normal voltage is reached Evaluate Deeply discharged Flashing then begins fast charge mode Defective Defective Flashing Flashing Battery pack or charger is defective If the defective LED status repeats a second time try charging a different battery If a different battery charges normally dispose of the defective pack see Maintenance section If a different battery also indicates Defective the charger may be defective Charging Fast charging Flashing Full ON Fast charging is complete charger maintains charge mode BATTERY PACK LED INDICATION DESCRIPTIONS IN CHARGING PROCESS
7. STRIES SWEDEN AB Stamholmen 147 4 DK 2650 Hvidovre Denmark Tel 46 08 24 60 30 Fax 46 08 24 60 31 E mail kundtjanst tti emea com TECHTRONIC INDUSTRIES FINLAND OY Stamholmen 147 4 DK 2650 Hvidovre Denmark Tel 0800 1 09000 Fax 0800 1 09001 E mail asiakaspalvelu tti emea com 960324002 01
8. Via Fratelli Gracchi 39 20092 Cinisello Balsamo MI Italia Tel 39 02 37050440 Fax 39 02 37050444 TECHTONIC INDUSTRIES IBERIA S L Av De la Industria 52 Coslada Madrid Espa a Tel 91 485 12 10 TECHTRONIC INDUSTRIES SOUTH AFRICA CO PTY LTD P O Box 83888 South Hills Johannesburg 2136 South Africa TECHTRONIC INDUSTRIES ASIA CO LTD 24 F CDW Building 388 Castle Peak Road Tsuen Wan Hong Kong Tel 852 2402 6888 TECHTRONIC INDUSTRIES CENTRAL EUROPE GMBH Itterpark 2 D 40724 Hilden Deutschland Tel 49 0 2103 960 0 Fax 49 0 2103 960 238 TECHTRONIC INDUSTRIES AUSTRALIA PTY LIMITED Building B Rosehill Industrial Estate 3 Shirley Street Rosehill NSW 2142 Australia Tel 02 8892 1800 or 1300 361 505 Fax 1800 807 993 TECHTRONIC INDUSTRIES NZ LIMITED 27 Clemow Drive Mt Wellington PO Box 12 806 Penrose Auckland New Zealand Tel 64 0 9 573 0230 Free Call 64 0800 279 624 Fax 64 0 9 573 0231 A amp M MIDDLE EAST FZCO P O Box 61254 Jedel Ali Dubai United Arab Emirates Tel 9714 8861399 Fax 9714 8861400 TECHTRONIC INDUSTRIES DENMARK APS Stamholmen 147 4 DK 2650 Hvidovre Denmark TIf 43 56 55 55 Fax 43 56 55 56 E mail kundeservice tti emea com TECHTRONIC INDUSTRIES NORWAY AS Stamholmen 147 4 DK 2650 Hvidovre Denmark TIf 47 800 12 493 Faks 47 800 12 492 E mail kundetjeneste tti emea com TECHTRONIC INDU
9. losive gasses or vapour Keep well away from petroleum paint and cleaning supplies and gas fired heating systems A WARNING Charge in a well ventilated area Do not block charger vents Keep them clear to allow proper ventilation CHARGING THE BATTERY PACK Battery packs are shipped in a low charge condition to prevent possible problems Therefore you should charge them until the LED on the front of the charger glows green constantly CHARGING A HOT BATTERY PACK When using a tool continuously the batteries in the battery pack will become hot You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge nal Instruc NOTE This situation only occurs when continuous use of a tool causes the batteries to become hot It does not occur under normal circumstances Refer to CHARGING A COOL BATTERY PACK for normal recharging of batteries If the charger does not charge your battery pack under normal circumstances return both the battery pack and charger to your nearest Authorized Service Center for electrical check CHARGING A COOL BATTERY PACK If the charger does not charge the battery pack under normal circumstances return both the battery pack and charger to your nearest Authorized Service Center for electrical check m Only charge the Ryobi battery pack BPL3626 with this charger m Make sure the power supply is normal household voltage 220V 240V 50Hz 60Hz AC
10. nded by authorized party This warranty does not cover belts brushes bags bulbs or any part which ordinary wear and tear results in required replacement during warranty period Unless specifically provided under applicable law this warranty does not cover transportation cost or consumable items such as fuses This limited warranty is void if the product s original identification trade mark serial number etc markings have been defaced altered or removed or if product is not purchased from an authorized reseller or if product is sold AS IS and or WITH ALL FAULTS Subject to all applicable local regulations the provisions of this limited warranty are in lieu of any other written warranty whether express or implied written or oral including any warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT SHALL WE BE LIABLE FOR SPECIAL INCIDENTAL CONSEQUENTIAL OR INCIDENTAL DAMAGES OUR MAXIMUM LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT This warranty is valid only in the European Union Australia and New Zealand Outside these areas please contact your authorized Ryobi dealer to determine if another warranty applies EC DECLARATION OF CONFORMITY Name Techtronic Outdoor Products Technology Limited Address C O TTI 24 F CDW Building 388 Castle Peak Road Tsuen Wan N T Hong Kong Name and address of the person authorised to compile the technical file Name Simon Del Nevo
11. s can cause damage to the appliance and may increase the risk of personal injury and property damage A WARNING Never allow the charger to be modified in any way unless at an authorised service centre This may increase the risk of serious personal injury or property damage A WARNING Damage to property material Mains voltage must correspond with the voltage ASSEMBLY SEE FIG 3 Insert the provided power cord into charger socket before cl harging DESCRIPTION ARD BCL3620 charger Charger socket Indicator LED Battery port Key hole hanger Depress latches to remove battery pack Power cord Eng Original Instruc SYMBOLS Some of the following symbols may be used on this product Please study them and learn their meaning Proper interpretation of these symbols will allow you to operate the product better and safer SYMBOL DESIGNATION EXPLANATION A Precautions that involve your safety V Voltage Direct current Type or a characteristic of current I a To reduce the risk of injury user must read and understand operator s manual before using this product Class Il Protection against electric shock rely on double insulation or reinforced insulation T3 15A Time lag type fuse INDOOR use only Recycle unwanted Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check wi
12. th your Local Authority or retailer for recycling advice Q p DD CE Confirmity The following signal words and meanings are intended to explain the levels of risk associated with this product SYMBOL SIGNAL MEANING DANGER ndicates an imminently hazardous situation which if not A avoided will result in death or serious injury WARNING ndicates a potentially hazardous situation which if not avoided A could result in death or serious injury CAUTION ndicates a potentially hazardous situation which if not avoided A may result in minor or moderate injury CAUTION Without Safety Alert Symbol Indicates a situation that may result in property damage Eng ely SPECIFICATIO Battery pack BPL3626 Voltage 36V Charger input 220V AOV 50Hz 60Hz AC only Battery capacity 2 6Ah No of cell for battery 20 Maximum charging time BCL3620 100 minutes so Quick recharge 1 hour OPERATION A WARNING Do not allow familiarity with products to make you careless Remember that a careless fraction of a second is sufficient to inflict serious injury A WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product The use of attachments or accessories not recommended can result in serious personal injury A WARNING Never operate the charger where there is a possibility of inflammable or exp
13. vacuum cleaner brush to clean the air vents on the charger m Keep the air vents free of obstructions STORAGE Store your charger in a cool dry place between 10 25 C It is not recommend to leave it in a vehicle during hot or cold conditions Ensure no metal filings or swarf can fall into the vents during storage as this may cause serious injury when it is next used ENVIRONMENTAL PROTECTION DISPOSAL Do not dispose of this product as unsorted municipal waste Separate collection of such waste for special treatment is necessary Recycle raw materials instead of disposing as waste The machine accessories and packaging should be stored for environmentally friendly recycling LIMITED WARRANTY TTI warrants this outdoor product to be free of defects in material or workmanship for 24 months from the date of purchase by the original purchaser subject to the limitations below Please keep your invoice as proof of date of purchase This warranty is only applicable where the product is used for personal and non commercial purposes This warranty does not cover damage or liability caused by due to misuse abuse accidental or intentional acts by user improper handling unreasonable use negligence failure by end user to follow operating procedures outlined in the user s manual attempted repair by non qualified professional unauthorized repair modification or use of accessories and or attachments not specifically recomme
Download Pdf Manuals
Related Search