BIM-1200W Fog Machine
Contents
1. at least 20cm Keep far away from children fire explosive and flammable things And avoid scalding 2 It is a normal thing to spray out some water when the first time use 3 When the fog oil be used up you should add in time If the fog machine work without fog oil the pump and other parts will get damaged When adding oil you should turn of the power and the carefully to avoid spill over to cause short circuit 4 lf the fog turns less and the pump makes noise or can not produce fog you should turn off the power and at the same time check the oil capacity fuse controller and power plug If all of these are normal please connect the power with the plug and try again if the problems still can not be solved you should contact supplier 6 The fog machine should work under professional worker s supervistion Please do not add flammable liquids gas and perfume into the fog oil tank 7 When working do not touch power wire 8 When long time no use or after use you should tear off the plug Maintaince 1 Bad fog oil will cause choke so please use high quality fog oil 2 Too heavy fog oil and unclean fog oil will cause choke so you should clean the fog machine when heating by use 1 100 diluted acid after used about 40 hours Connection for DMX512 The fog machine can be controlled by DMX signal you should use the 3 pin XLR wire to connect The distance can not over 100m Notice Some controllers can work normally only aft2. Packing List 1 Fog Machine 1pcs 2 Power cable 1pcs 3 User Manual 1pcs Specifications Voltage AC220V 50HZ Power Consumption 1200W Fuse 10A Tank Capacity 2 3L Control Mode Wire control Remote control Packing size 56 33 28 CM W 7 0KG BIM 1200 Fog Machine Use Manual Guidance 1 Thank you for having chosen our company s fog machine For your own safety please read this user manual carefully before installing the device By following the suggestions found in this user manual you can look forward to the reliable and satisfactory performance of your fog machine for years to come 2 When receiving the machine open the package check carefully whether the machine is damaged or the accessories are lost if problems found please contact the supplier And check the spray nozzle carefully avoiding any foreign materials to choke the nozzle 3 Before connect with power you should check whether the power you use is suit for the fog machine or not 4 Keep the fog machine flat then open the fo oil tank and filling with high quality fog oil then fasten the cap 5 Connect the controllers with the fog machine then you can control the fog machine with the controllers Notice 1 This fog machine should be used in dry area and note that the fog machine has grouding requirement Please avoid any water and rain fall in the machines if water and rain fall in turn off the power immediately The room for cool should be
3. er exchange of Ted ao Address Code Setup Now the fog machine has one channel and the scope of the address is from 0 255 ON 1 3 45 6 7 8 9
Download Pdf Manuals
Related Search