www.galaxykorea.com
Contents
1. After getting the prepared ingredients ready plug the power plug into the outlet and then turn on the power Caution e Do not operate the power plug with wet hands This can be the cause of electric shock electric leakage or fire e Check that the condition of the outlet is proper Insert cleanly prepared ingredients one by one to the slot Press the FORWARD of operation switch to begin its operation Caution e Forward Press the ingredients down to do low speed squeeze extraction e Reverse Turn the ingredients in reverse direction to the top If the screw stops or opening the lid is difficult due to inserting too much ingredients press reverse gt stop forward for about 2 3 times repeatedly Caution e While extracting prepare the ingredient according to its characteristics For ingredients with strong fiber Leafy vegetables celery water celery angelica kale and others and ingredientswith long and strong fiber Stem part 8 5cm or under 1cm or under for angelica and leaf part should be rolled for extraction For fruits with hard seeds remove the seeds and even the small sizes of frozen ingredients should be fully thawed before they can be used X For more detailed information please refer to p18 p27 e When inserting too much ingredients at once the operation may be stopped so slowly insert one at atime 05 If the p2. S C l cH OH gt t ISO Certification Body S352 PLEATINIG ofa SIS ccmalS LISTED CES IEC GALAXY P REMIUM J U I C E R SINCE 1990 Galaxy Premium Juicer Instruction Manual GALAXY www galaxykorea com A NUC Customer agyu Service 11577 5057 This is a universal user s manual and the color of the product can vary depends on each model The color and specification of a product can be changed without any prior notice to improve the quality of the product 600Iz15 Osr O06 EN Name of Each part 1 Hopper Funnel 2 Drum Lid 3 Pulp Cup 4 Juicing Bowl 5 Juice Cup 7 Juicing Screw 8 Rotation Wiper 9 Strainer 01 10 Pusher 11 Cleaning Brush 12 Tofu Mold x Depending on the product model the actual product s color may be different STEP 1 How to assemble Juicing Bowl Set Align the red on each part and put them together in order Align the red on the drum lid and close it by turning clockwise STEP 2 How to assemble Juicing bowl set and Base After raising the juicing bowl set on the base align the black upside W point in the drum lid with the Apoint in the base and turn it in the direction of A close direction 02 Detailed Assembly Method STEP 1 Assembly Method for Juicing Bowl Set Before the usage Fe neeet ae eyes ere ees please chec kl Check
3. Under running water wash the cleaning brush and strainer s inside and out alternately Alternately rinse the cleaning brush and the inside and outside of juice net with running water After washing disassemble the rotating brush and the juice net Store the disassembled product after they are dried
4. ingredients down to do low speed squeeze extraction Stop Stop the operation Reverse Turn the ingredients in reverse direction to the top 06 Disassembling and Cleaning Method x Depending on the product model the actual product s color may be different After placing the operation switch on stop unplug the cord Caution Stop after all of the juicing bowl set is eliminated of the pulp For convenient washing after the juicing is completed run it for about 30 seconds Depending on the ingredient if opening the lid is difficult repeat 2 3 times of reverse gt stop gt forward rotation and then firmly press the drum lid s top side with the palm of your hand and open by turning X Depending on the ingredient insert water into the slot as a quick washing and then turn the lid After turning the container lid in counter clockwise direction disassemble by pulling up the drum lid After turning the juicing bowl set in counterclockwise direction disassemble by pulling up the juicing bowl set 07 From the container disassemble the rotation wiper strainer and screw After disassem bling each parts in the reverse order of assembling wash with a soft brush Caution Please be aware that if you do not immediately wash after usage debris will dry off and not only make disassemble and cleaning
5. that squeeze silicon and silicon ring are correctly plugged Fully fit the squeeze silicon to the bottom of the container in the direction of arrow as shown in the photo Turn the screw in the center of strainer and gently press it down Caution If the squeezed silicon and the silicon ring Caution Ifthe screw is not fully tightened bowl and is not completely fitted in the juice amount drum cannot be tightened may be little or the juice may seep out Fit the rotation wiper to the strainer and align the point in the strainer and rotation wiper to assemble Align each of points in the juicing bowl set and drum lid and turn it in clockwise direction to align at T point to close it 03 x Depending on the product model the actual product s color may be different STEP 2 Assembly Method for Juicing Bowl Set and Base Caution When assembling the juicing bowl set to After raising the juicing bowl set on the base w point in the drum lid with A point in the base and turn it in the direction of A close direction Match the pulp cup and juice up at the outlet as shown in the photo Silicon Ring Silicon Brush After separating it for washing it must be put back in the direction shown in the photo for use the base securely turn it until a clicking sound is made If it is not tightened properly it does not operate We Aim the tail side to the bottom to use 04 Usage Method
6. en use Silicon Ring Separate washing is possible After washing fit in the silicon ring in the home accurately by having the wide surface in the upper direction as shown in the picture 08 Screw Cleaning Method x Depending on the product model the actual product s color may be different TIP Thoroughly wash the screw with a cleaning brush under running water After washing with water use it after it is dried Before assembling the juicing bowl set be sure to always check if there are any debris on the screw OM Caution Be sure to thoroughly wash the screw even under the dip in the screw when used with seeded ingredients rubus coreanus grape and etc If there are leftover seeds in the screw during juicing the screw and the strainer may move in irregular motion resulting in sharpening of the screw Under running water thoroughly wash the outside of the screw By using the end of the cleaning brush eliminate debris seeds little bits of food stuck in the home part of the screw 09 Option Rotating Brush Usage Instruction x Depending on the product model the actual product s color may be different TIP Juice net can be more conveniently and easily cleansed by using the rotating brush Always use it when it is dried after washing Hold and fix the rotating brush with one hand and fit in the strainer D Caution Push itin until you hear the clicking sound
7. hard but also becomes the cause of decrease in operation efficiency The juicing bowl set disassembling can be easily disassembled in the sink by letting tap water flow from top to bottom Dry off well so that the inner side of the metal part in the screw Shaft does not have any moisture Clean the main body by wiping it with a soft lightly moistened cloth Caution If the washing cloth has much moisture be sure to remove the excessive water by squeezing the towel out well before wiping Disassembling and Cleaning Method x Depending on the product model the actual product s color may be different TIP Clean the rotating wiper under running water Always use it when it is dried after washing Before assembling the juicing bowl set be sure to check if the squeezed silicon and silicon ring is correctly fitted in 1 Caution If the squeezed silicon and the silicon ring are not completely fitted in the juice amount may be little or the juice may seep out Assembling After Washing Silicon Brush Silicon Brush Separate washing is possible After washing point the silicon brush s tail part in the downward direction and as shown in the picture place in the middle wide space and fit in the order of down up and then use Squeezed Silicon Can be opened and then washed After washing as shown in the picture place it in the direction of the arrow and th
8. roduct suddenly stops during operation If the product suddenly stops during operation then set the switch to stop press the reverse to push up the ingredients that are stuck in the screws and then press the forward again gt reverse stop forward for about 2 3 times repeatedly Stop Reverse Forward Reverse Turn ine inareclienis in reverse clirection io the 100 reverse switch only operates while it is pressed While the forward rotation is going on first press the stop switch to fully stop the operation and then press the reverse switch Pressing the reverse switch while the forward rotation is going on may be the cause of malfunctioning If the product is still not working properly separate the juicing bowl and wash it to use Caution e Once the juice and pulp are fully released at the end of extraction stop the operation switch If the release of residues are not fully finished after the extraction the lid may not open After finishing the extraction release the remaining pulp in the screw for about 30 seconds If the lid does not open easily at this time repeatedly press reverse gt stop gt forward for about 2 3 times and with the palm of the hand tightly pressed down on the top side of the drum lid turn it to open X Depending on the ingredient water may be added to the slot to do simple washing and then turn the lid to open Forward Press the
Download Pdf Manuals
Related Search
www.galaxykorea.com