DTC-2D-U02 USB Interface User`s Manual - DTC
Contents
1. Attaching the DTC 2D U02 interface to your host system Continued If your purchase included an MS 2D scan engine the scanner communications have been preset to Parameters Communicatons Communications Mode Reader Packet Format Reader to Host Packet Size Expect Host Response M Reader Send Retry Count M Host Acknowledgement T i e Text Commands USB Keyboard Rate M Keyboard Mapping RS232 Text Command Timeout Host Communications USB Native HID Raw 16384 Disabled 3 15 Disabled enable magic sequence 10 US English without leading 0 in alt num 11000 There are two ways to configure and test the MS 2D Engine Microscan s Windows based ESP Easy Setup Program Software which offers point and click ease of use and visual responses to user adjustments Data Matrix programming symbols encoded with configuration commands In both cases refer to the Microscan MS 2D Scan Engine User s Manual P N 84 000008 Rev A for operations details and procedures The DTC 2D U02 is a Standard USB HID interface converter for the MS 2D engine All other I O and control signals are passed through directly DTC 2D U02 USB Interface User s Manual DTC 2D U02 Specifications 100 INCHES a J1 0 985 oD T 7 USB 20 GOOD READ J2 110 U0 Rey 2 KOC gt 0 Automation System Integrators LLC 2013 All Rights Rsvd Pat Pend Trigger Wake Good Rd Beep Pwr Dwn GR2. 008 Rev A DTC 2D U02 USB Interface User s Manual 2
3. Diversified Technologies Luc Corporate Office 2 West Main St Victor NY 14564 585 461 2110 DTC 2D U02 USB Interface User s Manual RevA August 2013 O Copyright and Disclaimer Copyright 2013 All rights reserved Diversified Technologies LLC 2 West Main St Victor NY 14564 Tel 1 585 461 2110 The information contained herein is proprietary and is provided solely for the purpose of allowing customers to interface to and operate the Microscan MS 2D scan engine and is not to be released reproduced or used for any other purpose without written permission of Diversified Technologies LLC Throughout this manual trademarked names might be used We state herein that we are using the names to the benefit of the trademark owner with no intention of infringement Disclaimer The information and specifications described in this manual are subject to change without notice Technical Support For technical support visit www DTC 2D com or call 1 585 461 2110 during regular business hours EST Warranty and Terms of Sale For Standard Warranty information see www DTC 2D com warranty htm Diversified Technologies LLC or its subsidiaries does not warrant and shall not be responsible for any lost data or images contained in any product including in any returned product regardless of the cause of the loss Diversified Technologies LLC s products are not warranted to operate without failure Diver
4. OUND RoHS FC DTC 2D U02 Specifications Port Powered 5 VDC 315 mA typical 57mA Idle 1 6mA Sleep Dimensions 7 0 98 in D x 1 53 in W x 0 25 in H 25 x 39x 6 4 mm Weight 10 grams 4 to 50 C 0 to 131 F 5 95 RH non condensing Standard USB 2 0 Mini USB B jack Phoenix micro terminal block for trigger and I O NotUsed ooo o Power Down Wake Up Active Low Trigger Activetow 5 Beep Output Active tow 6 Good Read Activetow 7 DCGround 8 5VDCPower E EE 3 E DTC 2D U02 USB Interface User s Manual Appendix 1 Common MS 2D Data Matrix Configuration Symbols M0149 01 RS 232 Raw Mode Default M0027 01 M0026 01 M0025 01 M0024 01 RS 232 115200 Baud Default RS 232 57600 Baud RS 232 38400 Baud RS 232 19200 Baud M0023 01 M0019 01 M0018 0 RS 232 8 Data Bits RS 232 9600 Baud Default RS 232 7 Data Bits M0030 01 M46008 Ol M0029 01 RS 232 No Parity Default RS 232 Even Parity RS 232 Odd Parity M0031 01 M0032 01 UART Flow Control UART Flow Control None Default Hardware DTC 2D U02 USB Interface User s Manual 1 Appendix 1 Common MS 2D Data Matrix Configuration Symbols Continued M0136_02 MO138_02 M0139 02 Postamble CR Postamble LF Postamble CR LF Serial Only Serial Only Serial Only M0166 01 Save Settings For the full command set refer to the Microscan MS 2D Scan Engine User s Manual P N 84 000
5. manual The DTC 2D U02 interface is an USB communications accessory for Microscan s new state of the art OEM MS 2D Scan Engine and allows standard EIA RS 232 communications with the OEM engine unit It is designed as a low profile daughter card that would normally mount directly on top of the MS 2D scanner The DTC 2D U02 USB interface permits the Microscan MS 2D OEM scan engine to be used in designs where the OEM VAR or end user simply wants to use the MS 2D engine design without a costly design integration into custom discrete circuitry The DTC 2D U02 is a Standard HID USB interface converter for the MS 2D engine All other I O and control signals are passed through directly This manual provides information on connecting the DTC 2D U02 USB interface card to the Microscan MS 2D scan engine For scanner operations please refer to the Microscan MS 2D Scan Engine User s Manual P N 84 000008 Rev A or the Microscan website www Microscan com DTC 2D U02 USB Interface User s Manual O Table of Contents Getting Started Attaching the DTC 2D U02 interface card to the MS 2D scan engine Attaching the DTC 2D U02 interface to your host system Host Communications DTC 2D U02 Specifications Appendix 1 Common MS 2D Data Matrix Configuration Symbols DTC 2D U02 USB Interface User s Manual SR W N N DTC 2D U02 USB interface daughter card Getting Started Caution Be sure that all cables are connected BEFORE applying
6. power to the system Always power down BEFORE disconnecting any cables Important The DTC 2D U02 and Microscan MS 2D scan engine are intended for connection to a UL listed direct plug in power unit marked Class II and rated 5 VDC at 5 Watts or greater if using additional I O and or electrical accessories Package contents Part Number DTC 2D U02 USB Interface card DTC 2D U02 DTC 2D U02 USB Interface User s Manual O Attaching the DTC 2D U02 interface card to the MS 2D scan engine To attach the included 2 inch flexible interface cable to the scanner engine board first slide the end of the ribbon cable with exposed tin leads facing the circuit board upward into the housing Then carefully push the ZIF connector hinged clamp mechanism downward so that it covers the contact points as seen below Do the same thing for the end of the flex cable that attaches to the DTC 2D U02 interface card As shown below Again the exposed tinned leads must be facing the circuit card downward Insert flex cable Close connector Caution The connector housing and clamp mechanism are very fragile Attaching the DTC 2D U02 interface to your host system To attach the DTC 2D U02 Interface to your host use the USB Type B jack as seen below For convenience any USB B to USB A host cable will work J3 MINI USB B CONNECTOR 1 USB 5v Power Red 21 D Wht D Gin 4 GROUND DTC 2D U02 USB Interface User s Manual 2
7. sified Technologies Inc products must not be used in life support systems or other applications where failure could threaten injury or life THE DTC 2D S01 SERIAL INTRFACE IS NOT DESIGNED MANUFACTURED OR INTENDED FOR USE OR RESALE AS ON LINE CONTROL EQUIPMENT IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL SAFE PERFORMANCE SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS AIR TRAFFIC CONTROL DIRECT LIFE SUPPORT MACHINES OR WEAPONS SYSTEMS IN WHICH THE FAILURE OF TECHNOLOGY COULD LEAD DIRECTLY TO DEATH PERSONAL INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE DTC 2D U02 USB Interface User s Manual O Statement of agency compliance The DTC 2D S02 conforms to the following Product Specifications FCC Compliance FCC Part 15 Subpart B The DTC 2D S02 is RoHS compliant This certification applies to the DTC 2D S02 as a stand alone OEM industrial product and does not apply to the DTC 2D S02 as an integrated module When integrating the DTC 2D S02 into another product that product will still need to obtain any applicable certifications for the full or final product IMPORTANT The DTC 2D S02 and Microscan MS 2D scan engine are intended for connection to a UL listed direct plug in power unit marked Class II and rated 5 VDC at 5 Watts or greater if using additional I O and or electrical accessories Microscan and ESP are Registered Trademarks of Microscan Corp www Microscan com About this
Download Pdf Manuals
Related Search