IPECS Communicator For Android
Contents
1. You can search a Contact by the desired method and use a variety of functions after the Contact has been selected Searching a Contact 1 Press Contacts 2 Press the search window lightly and input the content to be searched Bb bd ED da BU BSOgOuNGU pocot oel Tle e Name search Use to find a Contact by inputting a name or initial consonant e Phone number search Use to find a Contact by a phone number 3 Select the desired Contact by scrolling up and down the screen It is possible to use the option menu by pressing and holding the item Grace Edit Delete e Edit Use to modify the selected Contact PECS Communicator User Guide Issue 1 0 27 28 1 2 Using a Contact You can use a variety of functions by pressing the searched contact slightly Contacts view PA Grace It is a name stored in contacts 6069 E mail will appear only if the e mail address has been registered in contacts 01012346069 01234567890 1234 gmail com Use to select the type of a phone number and make a call to the corresponding number e gt lt Use to write and send a message e gt lt Use to write an e mail if the e mail address has been registered in Contacts Management of Contacts You can save Contact information including name e mail address etc in the frequently used phone numbers Adding a New Contact Press Menu gt Add to Contact L2. Contacts Contacts Search Displaying 10 contacts Ashley Ae Bush Elena Grace James to Jess El 4 Add to Contacts Delete All Phone Contacts The name and phone number must be entered in every Contact and other information can be selectively inputted if necessary Add contact Contact name Mark Contact phone Mobile w PECS Communicator User Guide Issue 1 0 e Contact name Select the input field and enter a name e Contact phone Select the input field and enter a phone number It is possible to save up to 500 contacts in the phone book and four types of phone numbers can be inputted in each Contact e Contact email Select the input field and enter an email address 3 If input has been completed press Save e If the phone number has been already saved in a Contact it cannot be saved Please save it additionally in the existing name Adding a Contact You can add a Contact by searching the Phonebook registered in the mobile phone 1 Press Menu gt Phone Contacts Contacts Search Ashley Bush Elena Grace James Jess Ma Mark Gmail Mad Man Made Ma gt LL E BBEGOOS Poy Pelee e Name search Use to find a Contact entry by inputting a name or initial consonant e Number search Use to find a Contact entry by a phone number iPECS Communicator User Guide Issue 1 0 29 30 3 Select a Contact entry by pressi
3. Sets or deactivates the function if the speakerphone is necessary during a call with your party Trunk Access Code lt provides the function to set Trunk Access Code and SSDP Station Start Digits Pattern Set Trunk Access Code and if necessary select and set SSDP The maximum length Trunk Access Code and SSDP is 6 digits Trunk Access Code This code is programmed or added before a call is made if the calling phone number has more than 6 digits If the number of dialed digits exceeds 6 as the system assumes it can be a trunk call Trunk Access Code is applied to the trunk calling rule of the PBX system Generally 9 is used SSDP Station Start Digits Pattern Although Trunk Access Code has been programmed if the starting number is identical to the corresponding field pattern SSDP when making a call Trunk Access Code is not inserted SSDP is an extension separator That is if the calling number has more than 6 digits and to prevent the automatic insertion of Trunk Access Code input and use the starting number in SSDP sRTP sRTP Secure Real time Transport Protocol means a protocol for encrypting data received and transmitted in real time in the secure mode iPECS Communicator uses AES and ARIA encryption algorithm It selects one of them and performs encryption and decryption to prevent other persons from tapping or monitoring f the function has been set a notification message making a call in secure mode is
4. by using the microphone and speaker built in the phone Using Speakerphone 1 Press Speaker to make conversation with the speakerphone e Echo could occur in some phones when using the speakerphone function 2 Press Speaker again to turn the speakerphone off Setting Speakerphone If a notification message appears when you have pressed Speaker please set the function To set the function Please move to Menu gt Setting gt Call Options gt SpeakerPhone On Off e lf the function has been set V will be marked in the box If it is deactivated V in the box will disappear iPECS Communicator User Guide Issue 1 0 21 Answering a General Call during a SIP Call It is possible to receive a General Call during a SIP call through iPECS Communicator if automatic refusal of answering General Calls has been deactivated When you get a General Call during a SIP call a notification message SIP call is held automatically when receive the phone call will appear along with the notifying sound The following functions can be used when a SIP call is being received e Receiving General Call If you press the Call button the SIP call becomes the held status After the CDAM call has ended you can use the SIP call again e Rejecting General Call If you press the End button the CDMA call being received will be disconnected and the SIP call can continue to be used Auto reject General Call It is possible to automatic
5. failure respectively e f SIP setting has been correctly performed automatic login and registration will be tried when radio communication becomes possible as for the registration failure due to radio communication problems at the time of first registration trial Please select Service on OS startup iPECS Communicator Settings 6153 AUQIO settimgs Audio Advanced Settings List Count and Backup DND amp Call Forward Do Not Disturb Call Forward Type None Program settings Service on OS startup Launch service on OS startup Settings Wizard e lf Launch service on OS startup has been selected iPECS Communicator can be used without the need of re registration when the phone has been turned off and on again e If the function has been set V will be displayed in the box and if it has been deactivated the mark will disappear The default setting is Selected iPECS Communicator User Guide Issue 1 0 3 Phone Registration Status Use a variety of iPECS Communicator functions if your phone has been registered with SIP Checking SIP Registration Status If the green icon has been displayed in the status bar the device is in the registered status lt is possible to check the current status and registration number by dragging down the status bar or in the number input window e Indicates your phone is not logged in e Indicates your phone is in standby mode e Indicates t
6. Back lt then a warning message is displayed Press OK to normally end the call If there are much echoes during the call For this case please use the earphone included in the mobile phone If the screen is turned off The screen is turned on when the call is first received and it is turned off after the pre set lighting time if there is no action in the phone The screen is turned on again if the phone is slanted at the angle of larger than sixty degrees The screen is turned off after the pre set display lighting time if there is no action when using iPECS Communicator There could be no response to the angle however according to the type of the smart phone If there is no response when the access number has been inputted for the voicemail system If there is only a message like time has passed after the voicemail system has been connected and the access number has been entered please check the DTMF type supported by the CM server is set to INFO by moving to Setting gt Call Options gt DTMF Type gt INFO Default setting is INFO If calling or receiving is not possible though standby is displayed If Wi Fi setting has changed or the call has not ended normally error please perform exit after cancellation of registration and register the program again even when the green status is iPECS Communicator User Guide Issue 1 0 displayed Please perform exit after cancellation of registration and register it aga
7. IS alll AU PA P uop nnmnnn 3 Requirements for the Mobile Phone Hardware cooccccocccccccccccnccncncnocononcnonononncncnncnonnnnnnnnnnnnnnonons 3 Installation of IPECS Communicator oococcccnconccnncccncnanocnnnnnnanonnnnnrnnnrnnnnnnrnnnnanenanennnnnns 4 Pone Registration oie 6 ODIN SO tl coil 6 SIP Account SeN nadaa id 6 PRONE REGISTAUON STUS seri et 9 Checking SIP Registration Status cooocccoccccocnncccnccncncnncncnnnononnnonnnonnnnnonrnnnnnnnnnnnonnnnnnnnnnnnnnnaninos 9 Checking Subscriber Status Information cooocccoccncoccncconnnonnnnnnncnncnonncnconnnnnnnonnnnnonnnnnnrnnnnnnnnanenos 9 Unregister and re register your phone ccoocccocccocccocnconoconoconoconcconcnoncnoncconccnnconncrnncrnnnonnnennnennnnns 10 Phone FUNC IONS coccccoccocccconccnoncnnoncnncnroncnnnnroncaronennnannnos 11 Making CAS cos 11 Dialing with a Phone NuMDer coocconcconccononononononononononononononcnoncnoncnnnnonnnonnnonnnonnnonnnennnennninanenaninanes 12 Redialing the Last Number oococccoccconcnoconononoconononononononononononcnoncnnnnonnnonnnonnnonnnonnnennnennnenanenanenanes 12 Dialing With a PINGING NUMDEO sanctus da ii ica 12 eolica ne AE 12 Dialing from the Contacts escindida 13 Call Option SettiMg coocccccconnoccconnncconanoncnnnnnnnonannnnonnrnarnnncnnrnnnnnnrnnnrnnrnnnrnarnnnnnannnes 14 Setting Outbound Call Type ccooccccocnccocnoccnnoccncononccnnnonannnnannonanconnnonnnnnnnnnnannnnnnnnnnnnnannnnannen
8. TLS mode 4 Input Provisioning Server Address in Provisioning Server Address 5 Make a call in the Call screen e Use Provisioning Provisioning function is used for easy to set like certificate exchange or encryption rule However it s supported only for IPECS CM e Provisioning Server Address It is used for inputting the provisioning server address to conveniently set certificate exchange between the server and the user or encryption rules etc This function however only supports IPECS CM Please make it blank when it is not used e Local IP Adress Input or change the device IP address to be used in iPECS Communicator You can check the current local IP address e Server Information The information of the system in which the device is registered is displayed e Device Information lt displays the IMEI information of the device to be registered in the system This information is used as certificate and individual provisioning file when TLS is used Total is 15 digits only use end of 12 digits e Wi Fi Mac Address It displays Wi Fi Mac information This information however can be checked only if Wi Fi is turned on Call Options Setting It is possible to set or change the call related environment Please press Call Options Setting slightly Then select the function to be set or follow the guideline on the screen Please refer to In Call Option in page 19 for details e Use WLAN It is a function which autom
9. call list when the other place has answered the call by dual forking iPECS Communicator User Guide Issue 1 0 47 Open Source Software Notice This following GPL General Public License software used in this product are subject to the GPL License Agreements You can obtain a copy of the GPL licenses from Ericsson LG Enterprise Web Site http www ericssonlg com GPL License Used Open Source Applied Function or License GPL LGPL Application MPL BSD style Id 2 3 1 so Shared library LGPL libc 2 3 1 s0 GNU C library LGPL libcrypt 2 3 1 so Security related library LGPL libcrypto so 0 9 8 Security related library LGPL libd 2 3 1 so Dynamic linking library LGPL libm 2 3 1 so Math library LGPL libnss_ detailed Name service switch library LGPL Instructions so libpthread 0 10 so POSIX thread library LGPL librt 2 3 1 so POSIX real time extension LGPL interface libssl so 0 9 8 SSL LGPL libz so 1 1 4 Compression library LGPL RTP RTP LGPL sRTP sRTP LGPL SIP SIP Protocol LGPL OpenSSL Secure Network BSD Ericsson LG Enterprise offers to provide source code to you on CD ROM for a charge covering the cost of performing such distribution such as the cost of media shipping and handling upon e mail request to Ericsson LG Enterprise at ooensource lgericsson com This offer is valid for a period of three 3 years from the date of the distribution of this product by Ericsson LG Enterprise iPECS Communicator User Guide I
10. disappear PM 2 26 MA Notifications Missed call 2 Service Quality QoS It is possible to measure service quality in the standby mode in the 3G mobile network or during a SIP call QoS Quality of Service indicates service quality related to transmission and error rates on the Internet or in the network Checking SIP call QoS It is displayed on the screen during a SIP call and shows voice quality at three levels Sunny is Good e e a Cloudy is Bad Rainy is Impossible meren iii iPECS Communicator User Guide Issue 1 0 Call Log Chapter 4 The call log keeps track of all calls used in your phone This chapter explains how to use the call log Checking Call Log You can search the list by selecting Call log at the top of the screen Viewing Call Log If a phone number has been saved in contacts the saved name will be displayed and the call log will be continually updated with a new phone number 1 Press Call log Y Nikita Work 6102 R Yang Work 6015 xy Yang Work 6015 7 Elena Work 6149 Y Ashley Work 6104 Y 6163 R Yang Work 6015 me Yang 2 Work 6015 Y A Dialed call Indicates outgoing calls made from your phone e o A Received call Indicates received calls that were answered o ha A A Missed call Indicates missed calls 2 Select the desired call log item by scrolling up and down the screen You can use the option menu by pressi
11. incoming calls during a call e No Answer FWD Forwards an incoming call after the pre set no reply time has passed if the call has not been answered Call Forwarding Number If the call forwarding function has been set enter a number for call forwarding in the input window If None has been selected however as the call forwarding type this menu is disabled Service on OS startup It sets or deactivates the function to use IPECS Communicator without the need of additional registration when the mobile phone has been turned off and then on again Settings Wizard All user set values like environment and sound volume and data saved in iIPECS Communicator by the user will be removed and initialized to the installation status e Reset Settings SIP account setting call option setting notification setting audio setting advanced audio setting number of list items setting refusal of answering automatic execution of the service etc are initialized e Audio easy setting 1 Voice quality related data has been optimized for the general office environment If the product is used in the general office environment you can change audio setting to the recommended audio setting Please refer to the following for the details of set audio values Advanced audio setting for the general office environment Use of NS using NS Mode 3 iPECS Communicator User Guide Issue 1 0 Use of AGC using AGC Mode 3 Use of EC not bein
12. press End when the party receives the call e Three party Conference Press Transfer and enter a phone number for a third party then press Call PECS Communicator User Guide Issue 1 0 19 20 Call Transfer The Call Transfer feature redirects an active call to another number on the PECS system Screened Transfer You can talk to the transfer recipient before transferring a call Press Transfer during a call with your party e The previous call becomes the held status Press a phone number for forwarding and press Call If the third party responds let him her know call transferring e ltis possible to cancel transferring by pressing Cancel before the third party gets the call The call is transferred when you press End to disconnect it Unscreened Transfer You can transfer the call without announcing it to the recipient When the phone rings press the Keypad If you press a number for transferring and press Call the call is directly transferred to the number Q Mute Record Ht Dial Pad d Speaker l om Wai Conference Calls You can join several calls in a three party conference The relaying person B who has convened a meeting makes a call to the party A and press Transfer during the call e The previous call A becomes the held status e lf you press Transfer for a long time during a call you can use the option menu Press the phone number of the party C who will participat
13. the call connection tone will be heard and the call will be connected to your party Alternate Device Call Back If a call is made with PECS Communicator it is possible to get a call in another phone number directly inputted by the caller when the system calls back to the caller by using the mobile network To Set 1 Please move to Menu gt Setting gt Call Options gt Outgoing Type Settings 2 Select whether to use the Integrated dial features type and set Use e lf the function has been set V will be marked in the box If it is deactivated V in the box will disappear 3 Select Call Back in the Integrated dial features type e This menu is only enabled after Integrated dial features type has been set 4 Select Call Back alternate call back number and input another frequently used phone number internal IP phone mobile phone etc to get the Call Back call 5 Select Call Back or Call Through server and input the server address e Please contact the iPECS system manager for the server address To Use 1 Press Dial 2 Input a phone number and press Call 3 Select the phone number inputted in the Callback Select Type or Select Direct Input and input another phone number to be called internal IP phone mobile phone etc e If you press OK Callback Request message will show for a short time and the call will be connected 4 Ifthe phone rings and you get i
14. AS ol od it eee 32 PECS Communicator User Guide Issue 1 0 CHECKING MESSAGES sia acosa 33 WISING Gi Mes SAG ita ia tii 34 Managing Messages ss is 35 Use of Voice Mail SO VICOaciaciansiasaca dedica 35 Checking Voice Messages oi cio 35 INDUCING ACCESS NUDE Facil cda 36 User Environment SettiNQ cocccccconnoccconnocnconnonncnnnnnnnos 37 TO Set TNE ENVIO AMEN a 37 SIP ACCOUNT SOMOS A cio lides 37 Call OBIOAS SENG td a dulucsaeauey aes 38 NOMMNCATIONS SEUNG dotted ld 41 PAI Ope WING Sd da td de e tecnica wa 41 Advanced Audio SeMiNgS isis lila ari 41 Setting for the Number of List Items and the Backup occoocnccoccccccnccncnccncncnacnnnnnnnnonnoncncnncnnnnos 43 DO NOU TDS UD idad 44 Call A A A A ees a eel ig 44 Call Forwarding NUDE rd o LD 44 SANCIONADO 44 S N AS oven ANd ud O eee CON OA A eee Se A ee ee ee ee 44 Useful Information airis aaa 46 Guide on Problem Solving ei iii 46 FLODIGIMS Relategio USE unionis a a aaa aea A 46 Explanation O Error Messages de aa 47 Open Source Software NotiC occoncoccoccccccccconconconconconconcnaroncnnnonncancnncnncnncnnrnnrnarnnnos 48 GRECO o cea as 48 PECS Communicator User Guide Issue 1 0 iii Before Use Introduction of iPECS Communicator PECS Communicator is an Android based multimedia telecommunication application which supports most of functions used in the IP telephone The main window of iPECS Communicator is simple as divided into several functional modu
15. BOSU0GG E E O ey e The maximum size is limited to 80 bytes Please refer to the user s manual of your mobile phone for the detailed text input method Checking Messages lf a new message has been received an icon will appear for a short time in the status bar on the top of the screen and then disappear Dragging down the status bar and selecting the notification item will move you to the message screen 1 Press SMS Inbox 2 4 4 indicates the total number Sorry I m always picking of received messages and 3 means the 6153 number of read messages Could you please let me 6153 Could you please let me Yang Could you please let me Yang Could you please let me 6153 Write msg o Indicates you have received or unread messages o Indicates that you have sent messages e W Indicates that you have read messages 2 If you want to view messages according to the type press Y in the bar and then select a message box ASAS Ge Press arrow to select label for oe message sorting Inbox 2 4 amp Sent 7 e Please refer to Managing Messages in page 35 for details about the message box iPECS Communicator User Guide Issue 1 0 33 34 3 Please select a desired message by scrolling up and down the screen If you press an item for a long time you can use the option menu Select label Call Write msg View Add Contact Delete e Please selec
16. Elena Grace James Jess Nikita We 2 Add to Contacts Delete All Phone Contacts 2 Please select OK to delete all the phone numbers saved in Contacts PECS Communicator User Guide Issue 1 0 SMS 32 3 Chapter 6 By using this menu you can send and receive common short messages among the phones registered in the PECS system This chapter explains how to use the SMS menu Use of Messages SMS It is possible to send and receive common short messages by selecting SMS on the top of the screen and check the receipt of a new message with the status bar or notification sound according to the notification setting Please refer to Notification Setting in page 41 for details about the setting Sending a Message It is possible to write a new message The size of bytes which can be sent at a time can be different according to registered systems Press SMS Select Write msg Inbox 0 0 Write msg Directly input the phone number of the recipient 6153 6015 6016 6017 iPECS Communicator User Guide Issue 1 0 e You can send the same message at the same time if many phone numbers are inputted in the phone number input field Ex Please add a comma between two phone numbers as in 6015 6016 6017 Simultaneous sending is possible for up to ten persons 4 Write a message and press Send message to send it 8 Ple send us weekly report gt fol
17. Ll 5 IPECS Communicator for Android User Guide PECS is an Ericsson LG Brand gt Ad LG Please read this user guide carefully before operating your set Retain it for future reference ERICSSON Copyright O 2013 Ericsson LG Enterprise Co Ltd All Rights Reserved This material is copyrighted by Ericsson LG Enterprise Co Ltd Any unauthorized reproductions use or disclosure of this material or any part thereof is strictly prohibited and is a violation of Copyright Laws Ericsson LG Enterprise reserves the right to make changes in specifications at any time without notice The information furnished by Ericsson LG Enterprise in this material is believed to be accurate and reliable but is not warranted to be true in all cases Ericsson LG Enterprise and iPECS Communicator are trademarks of Ericsson LG Enterprise Co Ltd Document Information S W Version Issue Changes Release Date 1 0Ad 1 0 Phase 2 update 2013 11 13 Table of Contents BOTS USO naa 1 Introduction of IPECS Communicator oooccocconcconcccccnnnonccnncnanennnnnnnnnrnnnnnnrnanrnnrnnnnnnnnnos 1 ADOUE This USOr GUIA sms ssapaneds 1 Introduction of the DOCUMENT ccccccccssecceeecceeeceeeecececeueecaueesueessueeceucecaueesaueesueessusessueesseeesaass 1 Organization of the DOCUMENM ccccecccsecccseeceueeceuceceueecaeeccaeeceueecsueesaueesaeeesueessueesueesseseseeesaas 1 EXDIANatON Or yD OIS pul opinas 2 HTS CLOWN senses 3 Before
18. a call has not been ended normally or the icon has been shown in gray though a call has been ended re registration is required Press Menu gt Unregister amp Exit Select OK to Unregister amp Exit Attention This program will be closed e Please register your phone again for use Please refer to SIP Account Setting in page 6 for registration PECS Communicator User Guide Issue 1 0 Phone Functions Chapter 3 PECS Communicator provides telephone functions by use of SIP Session Initiation Protocol This chapter explains how to make and get a call by using the application and useful functions which can be used during a call On the Home screen touch the application shortcut to run the PECS Communicator Making Calls It is possible to make a call in various ways like the direct input of a phone number or selection of an item in the call list or contacts at the top of the screen It is possible to make or answer a call It is possible to check the recent calls you have made or received and make a call or view additional its information Search an item in the contact list and make a call Idle 6153 Inputted number is displayed here If a searched item in the recent call list has been lightly pressed the corresponding number will be displayed Recent call list is displayed If it has more than one item it is possible to search the list by scrolling up and down the screen Clear th
19. ally refuse the incoming CDMA call during a SIP call To set the function click the check box or title with a mouse to change its status set or deactivated This function has been set basically Setting Auto reject General Call To set the function Please move to Menu gt Setting gt Call Options gt Auto reject CDMA Call e If the function has been set V will be marked in the box If it is deactivated V in the box will disappear Function is Set Auto reject General Call during SIP call If a general call has been received during a SIP call the general call will end unanswered Function is Deactivated Holding of a SIP call during the SIP call If a General Call has been received during a SIP call a notification message will appear If the general call has been answered the SIP call becomes the held status Auto reject General Call If a SIP call has been received during a general call the SIP call will end unanswered PECS Communicator User Guide Issue 1 0 Do Not Disturb It is possible to refuse all the incoming calls automatically by setting the receipt refusal function during an important work or when the call cannot be answered To set the function Please move to Menu gt Setting gt Do Not Disturb e If the function has been set V will be marked in the box If it is deactivated V in the box will disappear AM 11 51 EE E Notifications DND mode 6153 e tis possible to mo
20. ans 14 Dialing with Call BaCk MAA 14 PECS Communicator User Guide Issue 1 0 i Alternate Device Cal Backs states de eran cedo enano ses eseci n enel cal credo edil seco nl n ces 15 DaN WI Cal T oU gM idos 16 Answering Calls srin ae se ace a sen a te 18 When the Screen Is Unlocked cosita id dedica 18 When the Screen Is Locked sc ccsssec ia ai iia dire 18 Hanging UD aunar a a a ei 18 Mi Calm ODO Me a 19 Rlace ealo AO anen e E A ee Pe 19 C All Transi A e o a a a e 20 e A a a e ate a a a ETa a 20 MU E A E oammharhas aman eclogite tania 21 Call FREGONGIING o a a aa ie aes basen chee as a A a ises aus 21 Answering a General Call during a SIP Call oocococncccnnonocnccncncncnnnconcnnnnnonnnnnoncnonaconnnnnnos 22 Auto reject General Calling 22 Do NOL LISTED curar a lid a eiii 23 CAFORNA INO seann nietas ei eso iio 23 Missed Call Notifica id lle 24 SEVICE QUAY US dci 24 CAMEO ma pride 25 GRECO Cal Lo ado ocio 25 VIEWING O 1400 AAA ES E ER 0 O O eerste err ete 25 JSN AN MOO inscrit lela iia Mone eaten sa dale ol lot e td 26 Contact nos 27 Us of Gontacts cuasi loca ees 27 Searching a COMA Edo oes 27 USPD AENA ote o he 28 Management of Contacts cuisine 28 Adding NeW COMAC nao 28 Adding a Cona Cienan aa a a E ee te OS eer 29 Adding a Contact from the Call lOD oocococcccccncoccncconnnoonccnnncnncnonanonnnnnnnrnnnncnonacinnnnnnos 30 NN 30 SMO ad 32 Use or Messages SMS ui o do a 32 Sendinga ME S
21. arched phone number is pressed lightly the corresponding number will be displayed If it is pressed for a long time the popup window will appear e f more than one result has been searched it is possible to select the next number by scrolling down the recent call list window Dialing from Call log It is possible to search up to 500 numbers from the recently called or answered phone numbers Press Call log and search the list my Yang Work 6015 Cg Yang Work 6015 Q 8054 Yang Work 6015 Y Yang Work 6015 Y Grace Mobile 01012346069 Y James Mobile 01012345678 Y James Work 6148 PECS Communicator User Guide Issue 1 0 2 2 3 e The type of a call list item and the name saved in contacts will be shown Y Indicates outgoing calls made from your phone Indicates received calls that were answered tf Indicates missed calls Press a selected phone number lightly and press to make a call Call log view Missed call 2013 11 10 11 08 48 0 sec Yang 6015 Send text message a View Add Contact Dialing from the Contacts It is possible to make a call by using contacts If many types of phone numbers are assigned in one name saved in contacts please select the desired phone number among them Press Contacts Select the contact search window and input a name or number to be searched O O Contacts Contact search window Gra Gray Grace Grade Grass G
22. atically tries to log in when wireless LAN is accessed for a telephone call through it e Outbound Type Setting Select or change the type of a call when it is made at the device Outbound Type use Determines whether to use the outbound selection call type Outbound Type Select the outbound call type This menu is enabled only if outbound call type use has been set e PECS Communicator only Make a call with iIPECS Communicator and use Wi Fi or mobile network e PECS Communicator when availabl Make a call with iPECS Communicator if you are in the region where Wi Fi or mobile network can be used 38 iPECS Communicator User Guide Issue 1 0 e General Call only Make a call with the mobile phone and use the mobile network e Always ask Select PECS Communicator or mobile phone when making a call Integrated dial features type use Determines whether to use the integrated dial features type Integrated dial features type This menu is enabled only if integrated dial features type use has been set e SIP SIP Session Initiation Protocol is an IP telephony signaling protocol which is mostly used for making a voice call over IP e Call Back Use the Call Back and Alternative Call Back functions when making a call e Call Through Use the Call Through function when making a call e VCC VCC Voice Call Continuity is a function which makes it possible to connect a call with Call Through when weak Wi Fi signal ha
23. ation emphasis on important information or reference for related information which is required for the correct use of the application PECS Communicator User Guide Issue 1 0 Installation Chapter 1 This chapter explains hardware requirements for installing the application on your phone and the process of PECS Communicator installation Before Installation Please check the requirements for your phone hardware before installing the application Requirements for the Mobile Phone Hardware Minimum requirements for running iPECS Communicator are as follows Please check the requirements and notices for your phone being used by referring to the following details Minimum Specification e Operating System Android 2 3 e CPU 600MHZ or higher e Storage 10Mbytes RAM or more of free memory Recommended Specification e Operating System Android 2 3 or higher e CPU 1GHz or higher e Resolution 480 800 e Firmware 2 3 4 or higher Notices e PECS Communicator is optimized to the 480 x 800 resolution If the device resolution is not 480 x 800 the UI image sizes and arrangement of iPECS Communicator could be seen differently e The order or name of adding and viewing the Contacts could be different among mobile phone makers e Functions mentioned in this guide could not normally run in some devices Test model LG Optimus 2X Samsung Galaxy S2 Android 3 0 Tablet is not supported e When PECS Communicator run
24. d call through mobile data in the Wi Fi shadow area or when it is difficult to use it If mobile data is used usage fee could occur and data fee could be charged according to the payment system of the user lf the function has been set the call info window appears when making a call through mobile data and the call is made when OK is selected If the integrated dialing function use has been also set the call through mobile data selection window is additionally displayed when making a call TCP is recommended as the transmission protocol for stable network status e Disable mobile data alert Determines whether to show the warning window when using mobile data iPECS Communicator User Guide Issue 1 0 39 40 Phone contact interlock Sets or deactivates the function that the phone contacts are also shown on the Contacts tab Auto answer on page Delivers notifications and others to the registered devices by using the broadcasting function Sets or deactivates the function of automatic or manual listening of internal broadcasting f automatic listening has been set the device automatically becomes the calling status when receiving the broadcast and the call ends when the broadcast finishes Internal broadcasting is an additional function of iIPECS CM Auto reject CDMA call Sets or deactivates the function that a general call which comes in during a SIP call is automatically refused Speaker Phone On Off
25. displayed when making a call Supported encryption algorithm AES AES CM 128 HMAC _SHA1_ 80 ARIA ARIA_CM_128 HMAC_SHA1_ 80 DTMF type Sets or changes the DTMF Dual Tone Multiple Frequency type DTMF is number information transmitted by the phone which is used in the electronic exchanger DTMF type In Band RFC2833 INFO Default setting INFO Codec sequence Sets or changes the codec coder which converts voice signal into digital signal and decoder which performs inverse conversion Supported codec PCMU PCMA G729 Default setting G729 PECS Communicator User Guide Issue 1 0 Notifications Setting It is possible to set or change the call and message related environment Please press Notifications slightly Then select the function to be set or follow the guideline on the screen As for sound and vibration setting however those set in the mobile phone take precedence Missed call Sets or deactivates the function to notify unanswered calls in the status bar SMS Sets or deactivates the function to notify the receipt of new short messages in the status bar SMS notification Sets or deactivates the function to notify the receipt of new short messages with a notification sound This menu is enabled only if SMS Messages has been set Set vibration Sets or deactivates the function to notify the receipt of a SIP call and message with vibration Connection number Sets or deactivates the function
26. e 1 as there is no read message e Drafts If a message has failed to be sent is displayed and the message is stored here temporarily You can send the draft message again by pressing Re send in this box e Inbox amp Sent Received and sent messages are shown together Use of Voice Mail Service If a sender has made a call and left a message in the voicemail box an icon will appear in the status bar on the top of the screen Checking Voice Messages 1 Drag down the status bar and select Unchecked voice message WEDNESDAY PM 2 36 NOVEMBER 13 2013 Notifications Unchecked voice message NA PR 2 Press OK on the pop up screen to check saved voice messages Call Connect to message box and check messages iPECS Communicator User Guide Issue 1 0 35 36 You will be automatically connected to the voicemail system and hear the audio guidance of the system e Press the keypad on the screen and input the access number when you hear audio guidance Please contact the PECS system manager for the access number e Check saved voice messages according to the guidance of the voicemail system Please refer to the User s Guide of the system for details When the message check has been completed press End Inputting Access Number If the access number has been inputted receiving a voice message will automatically make a call to the voicemail system To set the function After selectin
27. e in the conference and then press Call If the party C receives the call Release the Holding of the previous call A and start the conference call e lf you press Hold during a call according to need the corresponding party becomes the held status iPECS Communicator User Guide Issue 1 0 Mute During a call you can turn off the microphone in your phone The other party cannot hear you but you can still hear them 1 During a call with your party press Mute e If the sound has been cut off the mute icon XI will appear on the screen 2 If you want to re send the sound press Un Mute Call Recording It is possible to record a call with your party when you should take notes during the call or if necessary Recording during a Call 1 During a call press Record on the screen e A notification message Call to start recording appears call recording starts and the recording icon is displayed on the screen 2 Press Stop on the screen to end the call recording Playing the Recorded Message Messages recorded by the user can be heard with a media player or file manager application which can play the mobile phone music iPECS Communicator itself does not support the listening of recorded calls e Directory path of recorded files sdcard iPECS Communicator yymmddhhmmss wav Using Speakerphone It is possible to make conversation with the party over the phone within the specified range about 30cm
28. e mis typed number If it is pressed for a short time a letter on the left of the cursor position will be deleted If it is oy Keypad J Delete pressed for a long time all the letters being inputted will be deleted Manually makes a call by using the keypad If the keypad is pressed the call screen will disappear If it is pressed once again it will appear again PECS Communicator User Guide Issue 1 0 11 12 Dialing with a Phone Number Press Dial button that is located on the top of the left pane Input the desired number by pressing the keypad and press Call e Please correct the mis typed number by pressing Delete and input again e tis possible to adjust the earpiece volume during conversation by pressing the Side Volume button on the left of the phone Press End when the conversation has ended CAUTION The ear microphone allows you to answer and end calls easily but when you use the ear microphone your ability to hear outside sounds may be affected Do not use the ear microphone where it can endanger your safety Redialing the Last Number Press and hold Call the last dialed number will be selected Pressing once more the last dialed number will automatically redial Dialing with a Finding Number Press Call Input a phone number with four digits or more e The more digits are inputted the more specific number can be searched Select one in the list of searched numbers and press Call e f the se
29. er port by user setting is selected and used e SIP server port user settings lt is used for user setting It is only enabled if SIP server port has been selected as user settings e Display name It is possible to input or change the user name to be displayed on the device screen It could not be inputted if more than twelve symbols like lt which are not common special symbols are entered as the display name e Name Input or change the phone number notified by the iPECS system manager e Authentication name Input or change the subscriber phone number notified by the iPECS system manager e Authentication password Input or change the subscriber password e Protocol Select or change the transmission protocol for communicating with the system in which the device is registered If mobile data is used TCP is recommended iPECS MG however only supports UDP iPECS Communicator User Guide Issue 1 0 37 e TLS mode TLS Transport Layer Security select or change the encryption algorithm which creates the encryption key used for encrypting the call between the server and the user by using the authentication key to prevent others from tapping or monitoring This menu is enabled only if the selected protocol is TLS secure access To set the TLS mode and make a call 1 Select 5061 as SIP server port 2 Select TLS security connection as Protocol 3 Select Encryption Algorithm to be used in
30. function when a call is made to the extension number PECS Communicator User Guide Issue 1 0 17 18 Answering Calls If you want to answer an incoming call press the Call button If the call comes in with the ear microphone connected press the Call End button of the ear microphone to answer it When the Screen Is Unlocked If the phone rings press Call to make conversation with your party Call control Incoming If you press the icon for long you Ne can use the option menu The name of your party saved in contacts is displayed Yang Work 6015 It is possible to check the phone number by the caller identification CID Lookup function Work is a display name registered in the Q e o oe phone numbers and can be viewed if inputted by your party ua Ad Dial Pad d Speaker gt Call a End e When the phone rings press the Side Volume button on the left of the phone to adjust the volume of the ring or switch over to the vibration status e lfa phone call has been received the bell rings the screen turns on and the call receiving message is displayed When the Screen Is Locked If the screen lock has been set drag the slider to make conversation with your party Hanging Up When the conversation with your party has ended press End If a call has been unanswered and disconnected End Call Declined and ga will be displayed on the top of the screen e The call time is disp
31. g Access Number in Setting gt Notification gt Voice message box input the access number of the system in which your device has been registered and then press Confirm NOTE Please refer to Connection number in page 41 for details iPECS Communicator User Guide Issue 1 0 User Environment Setting Chapter 7 It is possible to set a variety of environments of iIPECS Communicator By using environment setting you can use many functions applied to the product more conveniently This chapter explains how to set the use environment of the product To Set the Environment Move to Menu T gt Setting to set the environment for iPECS Communicator Then select the function to be set SIP Account Settings It is possible to set or change the SIP account required for login Please press SIP Account Settings slightly Then select the function to be set or follow the guideline on the screen Please refer to SIP Account Setting in page 6 for details e SIP server address or domain It is possible to input or change the IP address or domain of the system to be accessed Main Server Input or change the active server address when system redundancy is used Backup Server Input or change the standby server address Multi Server Input or change the server address when local redundancy is used It can be used for IPECS CM e SIP server port Select or change the server access port number If it is Custom SIP serv
32. g used AECM Mode 3 Use of CNG not being used Use of VAD not being used e Audio easy setting 2 Voice quality related data has been optimized for the environment with a noise If the product is used in the environment with a noise you can change audio setting to the recommended audio setting Please refer to the following for the details of set audio values Advanced audio setting for the environment with a noise Use of NS using NS Mode 3 Use of AGC using AGC Mode 1 Use of EC not being used AECM Mode 3 Use of CNG not being used Use of VAD not being used NOTE In noisy environments voice could be disconnected or talk quality could not be good during the call iPECS Communicator User Guide Issue 1 0 45 46 Useful Information Appendix This chapter provides the guide on solving problems which could occur during the use of iPECS Communicator lt also explains the information on the use of open source software according to the GPL General Public License license contract and how to request the source code Guide on Problem Solving It is possible to check the following and solve problems when iPECS Communicator does not execute normally during use Problems Related to Use If the call is not ended There could be a case where a call is not ended even when End has been pressed if the call is made in the environment where radio communication is not possible For this case if you press
33. gram PECS Communicator can be used by connecting to the system such as iPECS CM iPECS LIK and iPECS MG 5 Ifthe installation has been completed the iPECS Communicator shortcut icon is installed on the home screen and if the icon is selected iPECS Communicator will be executed iPECS Communicator User Guide Issue 1 0 Phone Registration Chapter 2 If the application has been installed necessary information like the SIP account should be inputted before use This chapter explains registration environment setting required for using the application Login Setting Set the SIP account for use before starting iPECS Communicator in your phone It can be registered in iPECS CM and be used only after the SIP account has been set SIP Account Setting The SIP server address display name name authentication name authentication password and protocol can be inputted through this setting 1 Please execute iPECS Communicator by selecting the shortcut icon Indicate the registration status of the application installed in your phone e Icon in the status window indicates non registration status 2 Please move to the setting screen by pressing Menu gt Setting 6 iPECS Communicator User Guide Issue 1 0 3 Please select SIP Account Settings iPECS Communicator Settings 6153 Call Options Notifications Audio Settings S Audio Advanced Settings List Count and Backup DND amp Call Forwa
34. hat your phone DND Don Not Disturb or Call Forwarding has been set Checking Subscriber Status Information It is possible to check the status information of the device subscriber like the user number SIP account call option and notification setting Please move to the setting screen by pressing Menu gt Setting Please select an item to be checked by scrolling up and down the setting screen PECS Communicator Settings 6153 SIP Account Settings Call Options A Notifications Audio Settings Audio Advanced Settings List Count and up DND amp Call Forwar d Do Not Distur Call Forward T If an item has been selected it is possible to select the sub menu or option view registered information or set input or change a necessary value according to the guidance on the screen iT Use WLAN Using WLAN Call Outgoing Type Settings Enable mobile data Using Mobile data Call Disable mobile data alert Not showing mobile data usage alert dialoc Phone contact interlock one contact interlock in Contacts tab Auto answer on page Short alert when paging is Auto reject CDMA call Auto re reject CDMA call during SIP call SpeakerPhone On Off Using the speaker phone e Please refer to User Environment Setting in page 37 for detailed information PECS Communicator User Guide Issue 1 0 10 Unregister and re register your phone If the setting of Wi Fi has been changed during use
35. in also for the case where the red status is displayed However refusal of answering is an exception If certain functions do not run lf Android 2 1 version is used some functions may not run Upgrade to Android 2 2 or higher is recommended If incoming voice is disconnected during the call A phenomenon could occur in which incoming voice is disconnected when talking with the party with the charger connected in some devices Explanation of Error Messages Errors in Registration e Login error 401 Authentication error e Registration error 404 When account information like name authentication name and authentication password does not match e Registration error 408 Registration timeout If the device is not connected to the Internet or IP address and port of the server has been entered incorrectly Errors in Call Trial e Call ended 480 Not connected due to a temporary fault e Call ended busy If the other party is committed to another call and so unable to take the call e Call ended unanswered If the other party does not answer the call e Call ended unregistered If it is an unregistered phone number e Call ended refused If the other party has hung up e Call ended connected to another phone 200 The call is ended and it is not put in the call list when the other place has answered the call by dual forking e Call ended connected to another phone 400 The call is ended and it is put in the
36. layed on the screen in the format of mm ss PECS Communicator User Guide Issue 1 0 In Call Option During a call usable options and buttons are displayed on the screen Please use the corresponding option button or other usable button to select a desired function Call control Indicates the service quality of the SIP call Please refer to Service Quality QoS in page Connected 24 for details Hoa Yang iia AN It is possible to hold the current call It is possible to turn off sound during a 00 08 call It is used for making another call or inputting numbers during a call It is possible to record a call Q Mute e Record Pf Dial Pad d Speaker To activate the speakerphone Transfer a Wai ae To end an active call It is possible to Call Transfer the current call to the other person or phone Place a Call on Hold It can be used for holding the current call for a short time to make a call change or receive it again lt is also possible to hold the current call and make another call for the three party calling 1 During the call with your party press Hold e The previous call becomes the held status and Holding is displayed on the screen 2 The following functions can be used with the current call held e Release Hold If you want to make conversation again with the held party press Release e Call Transfer Press Transfer and enter a phone number for call transfer then
37. les but has been designed for effective use PECS Communicator can be used in connection with a high capacity PBX like iPECS CM or KTS system like IPECS LIK and iPECS MG and could have different functions supported and screens according to connected systems About This User Guide This guide is intended for the iPECS Communicator users and provides user related information Introduction of the Document This guide introduces iPECS Communicator and explains how to install and correctly use PECS Communicator Product figures and screen images used in this guide could be changed without notice for quality improvement Organization of the Document This guide consists of seven chapters and one appendix in total including Before Use and the chapters are as follows e Before Use e Chapter 1 Installation e Chapter 2 Device Registration e Chapter 3 Telephone Functions e Chapter 4 Call List e Chapter 5 Contacts e Chapter 6 SMS e Chapter 7 User Environment Setting e Appendix Useful Information PECS Communicator User Guide Issue 1 0 1 Explanation of Symbols The following is symbols used in this guide Information presented with these symbols must be observed for the correct use of the application CAUTION This mark warns a situation in which light injury or product damage hardware software or data damage could occur if the instructions have been violated NOTE This mark provides additional explan
38. ng and holding it Mark Call View Add Contact e Call Use to directly make a call to the searched phone number e View Add Contact Use to add the searched phone number to Contacts If input has been completed press Save NOTE If phone Contacts linkage has been set you can show mobile phone s Contacts in the Contacts tab Please refer to Call Options Setting in page 38 for details Adding a Contact from the Call log You can directly save a received phone number in Contacts Press Call log and scroll up and down the screen to select a phone number to be saved in Contacts Select View Add Contact by pressing and holding the item Enter Contact information by referring to Adding a New Contact in page 28 Editing Contacts You can modify a registered contact or delete part or all of Contacts To modify a Contact Select a Contact to be edited by scrolling up and down the screens Press the Contact for long and select Edit in the option menu Modify Contact information such as a name phone number and email and press Save To Delete a Contact Select a Contact to be deleted by scrolling up and down the screen Press the Contact for long and select Delete in the option menu Select OK to delete the selected Contact iPECS Communicator User Guide Issue 1 0 To Delete All the Contacts 1 Press Menu gt Delete All ASA D Contacts Contacts Search Displaying 10 contacts
39. ng and holding the item Yang 6015 Call Write msg View Add Contact Delete PECS Communicator User Guide Issue 1 0 25 26 3 4 Call log Y Nikita Work 6102 2 O Ug Yang Work 6015 me Yang Work 6015 Y Elena Work 6149 Y Ashley Work 6104 Y 6163 K Yang Work 6015 All logs Missed calls Dialled calls Received calls es Call log view Missed call 2013 11 12 14 46 15 0 sec Yang 6015 ama Delete All Select the desired view type Using Call log You can use a variety of functions by pressing the selected call log item slightly Send text message a View Add Contact Select Menu gt View by to select the type of displayed call list items Delete All You can permanently erase all items from your Call log at once All logs You can view all Call log of your phone It is possible to view the type received date and time of the call list item If a name has been stored in Contacts for the phone number the name will be displayed Use to make a call to the corresponding number Use to write and send a message Use to view the contact or add the number to contacts if it has not been PECS Communicator User Guide Issue 1 0 Contacts Chapter 5 The Contacts helps you stay in touch with the people by keeping track of all their Contact information This chapter explains how to use contacts Use of Contacts
40. ort and import the environment setting and account which have been changed during use Data export Select an item to be exported and press Export It is possible to view the contents of the data by using a file management application iIPECS Communicator does not support a viewer to check the contents of the exported data e Directory path of user data sdcard iPECS Communicator User_Data xml e Directory path of environment setting sdcard iPECS Communicator System_Config xml PECS Communicator User Guide Issue 1 0 43 44 Data import If you select an item to be imported and press Import notification messages are shown according to the progress and the data can be viewed in the corresponding menu Ex If the address book has been imported it can be viewed in Contacts Do Not Disturb It sets or deactivates the function to automatically refuse all the incoming calls by setting the refusal of answering function while performing an important work or when it is impossible to answer calls It is disabled however if the call forwarding function has been set Call Forward Type It sets or deactivates the function which is used to directly forward an incoming call to the pre assigned another number when the user cannot answer the call or is in certain situations e None If None has been selected the Call Forwarding Number menu is disabled e Uncondition FWD Forwards all the incoming calls e Busy FWD Forwards
41. rd Do Not Disturb Call Forward Type None e Press Back lt if you want to cancel the setting of the selected item or move to the previous screen 4 Please select the item to be set by scrolling up and down the screen Once an item has been selected it is possible to select the sub menu or option view registered information or set input or change a necessary value according to the guidance on the screen SIP Account Settings SIP server address or domain A SIP server port 5900 Display name Name 6153 Auth name manual Auth passworg Protocol TCP e Please refer to SIP Account Settings in page 37 for detailed information 5 If the setting has been completed please move to the standby modeby pressing Back 6 For registration press Menu gt Register Login failed Unregister amp Exit Register Setting e f each item has been normally inputted and Registration has been selected the Login succeeded message will appear for a short time and Idle phone number will be displayed In the number input window iPECS Communicator User Guide Issue 1 0 e The login success icon shown in the status bar will be changed according to the set type of transmission protocol Ifthe protocol is UDP or TCP icon 2 and indicate login success and under login or failure respectively Ifthe protocol is TLS icon and indicate login success and under login or
42. reat gt It is possible to input a number by aw e pressing a button J BMW fellet Select a searched name and press the Call icon to make a call to the corresponding number Contacts view SA Grace 6069 01012346069 01234567890 PECS Communicator User Guide Issue 1 0 13 14 Call Option Setting This section explains call option setting which can be conveniently used when making a call Please refer to Call Options Setting in page 38 for details Setting Outbound Call Type When making a call on the call screen of the mobile phone iPECS Communicator or mobile phone General Call can be selected for calling Please move to Menu gt Setting gt Call Options gt Outgoing Type Settings gt Outbound Selection Call Type e This menu is only enabled after Outbound Selection Call Type has been set Please select an outbound call type Default setting is to use the general call e PECS Communicator only lt is possible to make a call with iPECS Communicator and use Wi Fi or mobile network e iPECS Communicator when available It is possible to make a call with PECS Communicator if you are in the region where Wi Fi or mobile network can be used e General Call only It is possible to make a call with your mobile phone and use the mobile network e Always ask lt is possible to select iPECS Communicator or mobile phone when making a call NOTE If the call t
43. s been detected during a SIP call and switch over to the SIP call when strong Wi Fi signal has been detected again in order to prevent the disconnection of the user call Call Back Alternate callback number Input another phone number internal IP phone mobile phone etc to get the Call Back call Call Through Phone number of server Input the server phone number for Call Through Wi Fi signal strength settings A Wi Fi signal strength is set for automatic switchover to the mobile network when the signal strength becomes weaker than the inputted value for a stable call through Wi Fi Also the network will automatically switch over again to Wi Fi when the Wi Fi signal strength becomes more than 12 dbm better than the user set value e Default signal strength 70 dbm e Inputtable range 60 80 dbm Useable from Wi Fi to 3G Voice It change from Wi Fi to 3G Voice automatically when VCC function is used it s not changed to Wi Fi when 3G is used It s option for avoid inconveniences because of changing to Wi Fi or 3G repeatedly on the line Callback Callthrough Server If Call Back or Call Through is set as the integrated dialing function type input the server address to be used Server Port is used with TCP 7878 basically it s changed server port to xxxx when it s entered xxxx at end of IP address if you need to change basic port Ex 111 222 333 444 5678 e Enable Mobile data It is set for registration an
44. s in background there could be a difference in standby time improvement according to the battery efficiency improvement and power saving performance of mobile phones e Bluetooth headset is not supported PECS Communicator User Guide Issue 1 0 3 2 3 e f connected through Wi Fi call or registration cutoff could occur due to the call delay and message loss according to the load applied to the AP Access Point and the AP performance Installation of iPECS Communicator First system re installation is explained The iPECS Communicator application can be downloaded in Play Store and be installed Direct Installation by Using a Mobile Phone Execute Play Store in your phone When Play Store has been executed input iPECS Communicator in the search window and press Search to move to the corresponding screen IA iPECS Communicator We ve changed a few things around here Google Play has a new design to make ALA coooodogu BRBUDOE Pol sm Select iPECS Communicator in the list of searched applications ci iPECS Communicator x iPECS Communicator User Guide Issue 1 0 4 Press Install at the right bottom of the iPECS Communicator installation screen and then press Agree and Download to start to install the application S COMMUNICATOR 2 ERICSSON LG ENTERPRISE INSTALL 4 6a 6 7 8 m e Hoses kk Description iPECS Communicator is an Android based multimedia communication pro
45. ssue 1 0 The contents of this document are subject to revision without notice due to continued progress in methodology design and manufacturing Ericsson LG Enterprise shall have no liability for any error or damage of any kind resulting from the use of this document Posted In Korea http ericssonlg enterprise com Ericsson LG Enterprise Co Ltd 2013
46. t the call connection tone will be heard and the call will be connected to your party iPECS Communicator User Guide Issue 1 0 15 16 Dialing with Call Through It is a function similar to Call Back If a call has been made in iPECS Communicator the mobile phone will make a call to the assigned Call Through phone number of the system by using the mobile network and the system will make a call to your party To Set Please move to Menu gt Setting gt Call Options gt Outgoing Type Settings Select whether to use the Integrated dial features type and set Use e If the function has been set V will be marked in the box If it is deactivated V in the box will disappear Select Call Through in the Integrated dial features type e This menu is only enabled after Integrated dial features type has been set Select Call Through phone number of the server and input a phone number e Please contact the PECS system manager for the server phone number e The server phone number is iPECS Communicator DID Phone number Select Call Back or Call Through server and input the server address e Please contact the PECS system manager for the server address To Use Press Dial Input a phone number and press Call Select Call Through in the Callback Select Type e The mobile phone will make a call to the Call Through phone number assigned in the server by using the mobile network The call connec
47. t Menu gt Delete All to delete all messages Using a Message You can use a variety of functions by pressing the selected message slightly Could you please let me View the message know when it will be convenient for you Check the status of the message read or unread View the sender information received date and time of the message 6153 2013 11 12 17 21 48 Reply Delete e Call Use to make a call to the sender of the message e Reply Use to make a reply to the sender of the message e Delete Use to delete the read message And also press Menu gt Forward to forward the selected message to other people while reading the message Could you please let me know when it will be convenient for you Yang 6015 2013 11 12 17 21 29 Forward View Add Contact e View Add Contact Use to view the number of the sender or add it to Contacts PECS Communicator User Guide Issue 1 0 Managing Messages Messages can be conveniently viewed and managed through four individual message boxes according to their types Please refer to Setting for the Number of List Items and the Backup in page 43 to change the number of messages shown on the screen e Inbox Received messages are stored and displayed in the form of Inbox 1 1 If a message has been read the number of read messages on the left is reduced like 0 1 e Sent Normally sent messages are stored Sent messages are displayed lik
48. tion tone will be heard and the call will be connected to your party iPECS Communicator User Guide Issue 1 0 Making a Call with VCC VCC Voice Call Continuity is a function which makes it possible to connect a call with Call Through when weak Wi Fi signal has been detected during a SIP call and switch over to the SIP call when strong Wi Fi signal has been detected again in order to prevent the disconnection of the user call To Set Please move to Menu gt Setting gt Call Options gt Outgoing Type Settings Select whether to use the Integrated dial features type and set Use e lfthe function has been set V will be marked in the box If it is deactivated V in the box will disappear Select VCC in the Integrated dial features type e This menu is only enabled after Integrated dial features type has been set Select Call Through phone number of the server and input a phone number e Please contact the PECS system manager for the server phone number Select Call Back or Call Through server and input the server address e Please contact the PECS system manager for the server address To Use Press Dial Input a phone number and press Call When the call connection tone is heard and your party responds make a conversation with the party over the phone e Call Through and SIP call switch over to each other according to the strength of the Wi Fi signal during a call e t could not normally
49. tive of the strength of radio waves Use AGC Default setting is no use AGC mode Default setting is 3 e 0 AGC_UNCHANGED e 1 AGC_DEFAULT 2 AGC_ADAPTIVE_ANALOG e 3 AGC ADAPTIVE DIGITAL 4 AGC_FIXED DIGITAL e EC Echo Cancellation It is used for removing unnecessary echoes during a call Use EC Default setting is no use EC mode Default setting is 5 e 0 EC_ UNCHANGED e 1 EC DEFAULT EC_ CONFERENCE EC_AEC EC_AES EC_AECM EC_NEC_IAD O NN F OO N e AES Mode AES Attenuation not being used e AECM Acoustic Echo Cancellation Mode It is used for enabling crystal clear voice communication in the hands free or speaker mode by reducing echoes which could occur when the speaker or hands free device is used AECM Mode Default setting is 3 e 0 AECM_QUIET_EARPIECE_OR_HEADSET e 1 AECM_EARPIECE 2 AECM_LOUD_EARPIECE e 3 AECM_SPEAKERPHONE 4 AECM_LOUD_SPEAKERPHONE PECS Communicator User Guide Issue 1 0 e Enable CNG Comport Noise Generation It is used for generating a constant noise when VAD is used to make the stability of the call e VAD Voice Activity Detection It is a function which differentiates voice from silence It is used when silence is not transmitted in the packet switching network Use VAD Default setting is no use VAD mode Default setting is Os e O VAD CONVENTIONAL e 1 VAD AGGRESSIVE_LOW e 2 VAD AGGRESSIVE_MID e 3 VAD AGGRESSIVE_HIGH VAD disable DTX Check with yo
50. to automatically make a call to the voicemail system when a voice message has been received Audio Settings Sets or changes the sound volume related environment Please press Audio Settings lightly Then select the function to be set or follow the guideline on the screen Earpiece gain Selects the desired sound volume of the speaker by scrolling up and down the screen Microphone gain Selects the desired sound volume of the microphone by scrolling up and down the screen Headset earpiece gain Selects the desired sound volume of the headset speaker by scrolling up and down the screen Headset mic gain Selects the desired sound volume of the headset microphone by scrolling up and down the screen Advanced Audio Settings PECS Communicator supports advanced audio setting By using this menu you can set or change the audio environment Please press Advanced Audio Setting lightly Then select the function to be set or follow the guideline on the screen NS Noise Suppression lt is used for suppressing the input to the amplifier to remove noise between signals Use NS Default setting is use NS mode Default setting is 3 e 0 NS_ UNCHANGED e 1 NS DEFAULT e 2 NS CONFERENCE e 3 NS LOW_SUPPRESSION e 4 NS MODERATE_SUPPRESSION iPECS Communicator User Guide Issue 1 0 41 42 e 5 NS HIGH SUPPRESSION e 6 NS VERY HIGH SUPPRESSION e AGC Automatic Gain Control It is used for maintaining the constant output irrespec
51. ur mobile operator if the allows this option e Volume scaling Used for adjusting the sound volume of the speaker Default setting is 1 2 Setting for the Number of List Items and the Backup You can set and limit the number of saved list items and backup the user data or configuration file Press List Count and Backup slightly Then select the function to be set or follow the guideline on the screen e Count of call log list Inputs or modifies the number of call list items to be saved in the Call List menu to 29 999 Old items are deleted in turn from the oldest and new items are listed according to the user set number of list items Default number of call list items is 500 e Count of contacts list Inputs or modifies the number of contact list items to be saved in the Contact menu to 11 999 Old items are deleted in turn from the oldest and new items are listed according to the user set number of list items Default number of contact list items is 1000 e Count of sms list Inputs or modifies the number of SMS messages to be shown in the Messages menu to 12 3000 Old items are deleted in turn from the oldest and new items are listed according to the user set number of list items Default number of SMS messages is 500 e Data Export Import You can back up and restore user data or environment setting User data Export and import user data like the address book and messages in the XML format Environment setting file Exp
52. ve to the Do Not Disturb setting menu by dragging down the status bar and selecting the notification item with the function set Call Forwarding Call forwarding is a function which is used to directly forward an incoming call to the pre assigned number when the user cannot answer the call or is in certain situations Setting Call Forward 1 Move to Menu gt Setting gt Call Forward Type 2 Select the call forward type e None If none has been selected the Call Forwarding Number menu is disabled e Uncondition FWD Forwards all the incoming calls e Busy FWD Forwards incoming calls during a call e No Answer FWD Forwards an incoming call after the pre set no reply time has passed if the call has not been answered Inputting Forward Number 1 Move to Menu gt Setting gt Call Forwarding Number 2 Enter a phone number to which a call will be forwarded iPECS Communicator User Guide Issue 1 0 23 24 Missed Call Notification If the unanswered call notification function has been set the unanswered call icon 4 will be displayed in the status bar at the top of the screen if a call has not been answered Dragging down the status bar and selecting the notification item moves you to the call log screen To set the function Please move to Menu gt Setting gt Notifications gt Missed call e If the function has been set V will be marked in the box If it is deactivated V in the box will
53. ype has been set Always ask making a video call will be changed to the general call This cannot be supported as messages are different according to makers Dialing with Call Back If a call has been made in iPECS Communicator the system will call back to the caller by using the mobile network and make a call to your party To Set Please move to Menu gt Setting gt Call Options gt Outgoing Type Settings Select whether to use the Integrated dial features type and set Use e lf the function has been set V will be marked in the box If it is deactivated V in the box will disappear Select Call Back in the Integrated dial features type e This menu is only enabled after Integrated dial features type has been set Select Call Back or Call Through server and input the server address e Please contact the PECS system manager for the server address PECS Communicator User Guide Issue 1 0 To Use 1 Press Dial 2 Input a phone number and press Call e A notification message on the data use fee will show and it is possible to make a call if Confirm is pressed e To turn the above notification message off select Menu gt Setting gt Call Options gt Disable mobile data alert 3 Select Callback in the Callback Select Type e If you press OK Callback Request message will show for a short time and the call will be connected 4 Ifthe phone rings and you get it
Download Pdf Manuals
Related Search