Chauvet CH-PAR56PACK User`s Manual
Contents
1. Foot Controller Operation The Foot controller provides the following functions on the chaser all on chasing and blackout BUTTON FUNCTION BLACKOUT Blackout will bring all light intensity to O or the off position FULL ON Full On will bring all channel output levels to full or maximum No visible chase will be seen In normal operation the chaser will automatically run the chases triggered by music Replacing a fuse Disconnect the power cord before replacing a fuse and always replace with the same type fuse With a Philips head screwdriver unscrew the fuse holder until it can be entirely removed Remove the damaged fuse from its holder and replace with exact same type fuse Insert the fuse holder back in its place and reconnect power FUSES F10A 125V 5 X20mm 0000 Par 56 System 6 11 1 2004 1 35 00 PM APPENDIX Maintenance To maintain optimum performance and minimize wear fixtures should be cleaned frequently Usage and environment are contributing factors in determining frequency As a general rule fixtures should be cleaned at least twice a month Unplug fixture from power Use a vacuum or air compressor and a soft brush to remove dust collected on external vents and internal components Returns Procedure Claims Par 56 System Returned merchandise must be sent prepaid and in the original packing call tags will not be issued Package must be clearly labeled with a Return Merchandis2. Load e N frame socket power capacity of 45 Ibs bi d p 7 cord with plug safety screen clutch brake and lamp retention O ring Actual color provided n di chrome Gel Pack 4 colored gels LED Indicator n 4 LED channel activit Linkable indicators x This 4 channel chaser can be linked to other 4 channel chasers for unison synchronized operation using CH Foot Controller DINEO Cablgs Simple blackout and Full On overrides 4 Receptacles 4 Fuses Fuse protection Audio Sensitivity Knob Power Switch On Off switch Par 56 System 4 11 1 2004 1 35 00 PM SETUP Par Can Lamp Installation The par can box will include both lamp and can The lamp is placed inside the can but not fastened nor installed in the socket Use caution when removing par cans out of the box and take care as to not drop the lamp Remove lamp from inside can to expose lamp socket Remove lamp retention ring by squeezing both ends of the ring together and then pull out Remove bubble wrapping from the lamp socket Hold lamp socket and glass side of lamp then proceed to insert the lamp inside the can while connecting lamp pins to lamp socket Replace lamp retention ring Slide combined gel frame safety screen and secure with clip If desired mount gel frame with or without gel Light Stand Setup This stand was designed to be operated on a flat and level surface 1 Chaser Setup Loosen leg extension knob and
3. tree etit retenti oe crat E XEM ec tane aa 5A per Ch Total output Capacity cepi ecoute D Erg eeepc de Ido eeu ede ede Lote de de tds 1200 watts max Fuse Main 1D Wii iia 20mm Glass 7A 125V Fast Blow Fuse Main 230V micras 20mm Glass 5A 250V Fast Blow PAR CAN Par Cahen TAO 4 x Short par56 can polished Lamp Par56 300w Medium Flood seen 4 x CH 300PAR56 MFL LIGHTING STAND Light Duty Load CAPACHY e UE 20 41 Kg 45 lbs i dizi A REIECTA TT 2 74 m 9 ft lpe Uie 4 mounting screws and T bar CONTROL amp PROGRAMMING Foot Controller ssai rites IA Da Dc da dee dete b e e Ya Plug Linkable chaser Usirig 2 oe oet herr rmt nr rr rsen e ver rtt CH DIN20 cable ORDERING INFORMATION P ai 56 System n riti E RE HEREI UTR Pe I OE regie re e na CH PAR56PACK 8 11 1 2004 1 35 00 PM
4. CH PAR56PACK PAR 56 System USER MANUAL Y CHAVVEL Chauvet 3000 N 29 Ct Hollywood FL 33020 U S A 800 762 1084 954 929 1115 FAX 954 929 5560 www chauvetlighting com Table of Contents BEFORE YOU BEGIN 1 4 eese eren arua nasa mamas aa RR R4 44 RR DRE annee ne SEDAN NR RR NR mn RS AR AR RR A 3 WHAT IS INGEUDEDJ 41 dete E ee ettet tet dti dt ebat ud na da E ee e a 3 UNPACKING INSTRUCTIONS AEE EA EE EEE EE EEEE EAE EAE EEE 3 Xe pets ER ML IE a te 3 SAFETY INSTRUCTIONS cda erre e ete To ooo eee eae tede ode e LA nt et 3 INTRODUCTION cui cR 4 FEATURES 0 18 tat nct e scc sd EE eh ho ed bees Arte MS var a ue 4 PRODUCT OVERVIEW Mn ecc ti a a 4 SETUP iiit eceeer tuat ac lest sce tactaas itecto ii aiii 5 PAR IGAN EAMP INSTAEEATION 2 5 ener il cito reia 5 LIGHT STAND SETUP treat nf dintel al ehh A ore athe ETENA en ne ne id 5 GHASER SETUP estra a a eh cree es A Se mo de E EN ER 5 LINKING 279s essed nat meme Sil cd ne Mare er dt an fee der des ie eee P 5 OPERATING INSTRUCTIONS o coccconoccccocannonancocconananananancnncnnananananancnonanananana rr RR OS AR AN RR R4 narran nnmnnn nnna 6 GHASER OPERATIONS ceat a a e a A dcr 6 FOOT CONTROLLER OPERATION c0cececccecsceeeeecececececeaueeseseceeeeeaeaueeseceeeeeeeauaaseeeeeseuaeaeseeeeeesaeanens 6 REPLACING A EUSE a e dd 6 APRENDO iia 7 MAINTENANCE 50 a e a e 7 RETURNS PROCEDURE cotos poe ade ri o A Prelate ado la 7 CLAMA e ln en A bo 7 TECH
5. NICAL SPECIFICATIONS a dias 8 Par 56 System 2 11 1 2004 1 35 00 PM Warning Caution BEFORE YOU BEGIN What is included gt 4 Chrome Par56 Cans complete with 4 clip gel frame socket power cord with plug safety screen clutch brake and lamp retention O ring gt 4color gel pack Unpacking Instructions Light Stand with mounting screws 4 channel chaser Foot controller 4 Par56 300w Medium Flood Lamps Warranty Card VVVVV Immediately upon receiving a fixture carefully unpack the carton check the contents to ensure that all parts are present and have been received in good condition Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling Save the carton and all packing materials In the event that a fixture must be returned to the factory it is important that the fixture be returned in the original factory box and packing AC Power To determine the power requirements for a particular fixture see the label affixed to the back plate of the fixture or refer to the fixture s specifications chart A fixture s listed current rating is its average current draw under normal conditions All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel is used solely for a 0 to 100 switch Before app
6. e Authorization Number RA Products returned without an RA will be refused Call CHAUVET and request RA prior to shipping the fixture Be prepared to provide the model number serial number and a brief description of the cause for the return Be sure to properly pack fixture any shipping damage resulting from inadequate packaging is the customer s responsibility CHAUVET reserves the right to use its own discretion to repair or replace product s As a suggestion proper UPS packing or double boxing is always a safe method to use Damage incurred in shipping is the responsibility of the shipper therefore the damage must be reported to the carrier upon receipt of merchandise It is the customer s responsibility to notify and submit claims with the shipper in the event that a fixture is damaged due to shipping Any other claim for items such as missing component part damage not related to shipping and concealed damage must be made within seven 7 days of receiving merchandise 7 11 1 2004 1 35 00 PM Technical Specifications Par 56 System 4 CHANNEL CHASER A NAT 168 27 mm 6 625 in Height TP EA 215 9 mm 8 5 in Width NIE E 57 15 mm 2 25 in Wel lit tente si ARR or P RH nei 2 Kg 4 4 Ibs Switch selectable power settings 115V 60 Hz or 230V 60 Hz European EM L Y 240V 50Hz AC input 3 prong IEC 60320 C14 AC output 115 V MM 7A per Ch AGC output 230V amp 24 OV Es certes
7. lying power to a fixture check that the source voltage matches the fixture s requirement Check the fixture or device carefully to make sure that if a voltage selection switch exists that it is set to the correct line voltage you will use Figure 1 AC Voltage Switch Verify that the power select switch on your unit matches the line voltage applied All fixtures must be connected to circuits with a suitable Earth Ground Safety Instructions Please read these instructions carefully which includes important information about the installation usage and maintenance Please keep this User Guide for future consultation If you sell the unit to another user be sure that they also receive this instruction booklet Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture This product is intended for indoor use only To prevent risk of fire or shock do not expose fixture to rain or moisture Make sure there are no flammable materials close to the unit while operating The unit must be installed in a location with adequate ventilation at least 50cm from adjacent surfaces Be sure that no ventilation slots are blocked Always disconnect from power source before servicing or replacing lamp or fuse and be sure to replace with same lamp source Secure fixture to fastening device using a safety chain Never car
8. pull outwards on legs to widest position for optimum stability Tighten leg extension knob Tighten set screw with supplied Allen wrench Loosen lower pole extension knob and pull pole upwards to fully extend lower pole Tighten pole extension knob Tighten set screw with supplied Allen wrench Loosen lighting bar knob Snap lighting bar into upper pole extension Using supplied mounting screws secure parcan s to lighting bar Take care to balance weight evenly Loosen upper pole extension knob and raise pole to desired height Stand extends a maximum of nine feet W It is advisable to purchase a C clamp for use with the 4 channel chaser In this way the chaser can be placed near the top of the stand where all cans will be within reach of the AC receptacles 1 Connect each parcan to an individual AC receptacle 2 Connect chaser to mains power 3 Connect Foot controller to 14 phone input on chaser LINKING The 4 channel chasers in the Par56 Pack and Par38 Pack can be daisy chain linked for unison operation using a CH DIN20 linking cable Par 56 System 11 1 2004 1 35 00 PM OPERATING INSTRUCTIONS Chaser Operation The 4 channel chaser includes 16 preset pattern chases The chases advance automatically and are triggered by music An audio sensitivity dial allows you to adjust the sound level received by the internal microphone for optimum sound activation The chaser will function immediately once turned on
9. ry the fixture solely by its head Use its carrying handles Maximum ambient temperature is Ta 40 Do not operate fixture at temperatures higher than this In the event of serious operating problem stop using the unit immediately Never try to repair the unit by yourself Repairs carried out by unskilled people can lead to damage or malfunction Please contact the nearest authorized technical assistance center Always use the same type spare parts Don t connect the device to a dimmer pack Make sure power cord is never crimped or damaged Never disconnect power cord by pulling or tugging on the cord Avoid direct eye exposure to lamp while it is on There are no user serviceable parts inside the unit Do not open the housing or attempt any repairs yourself In the unlikely event your unit may require service please contact CHAUVET Par 56 System 11 1 2004 1 35 00 PM INTRODUCTION Features e Complete light system for all occasions e 4par cans with 300w lamps and color gels e 4 channel chaser Sound activated with sensitivity knob 16 preset patterns 1 200 total watts Linkable via CH DIN20 cable Foot controller e Includes tripod light stand and mounting screws e Available in 115V or 230V e 1 year limited warranty Product Overview Tripod Light Stand Par56 Cans Lightweight tripod light stand Chrome Par56 Cans includes mounting screws and T aj ul complete with 4 clip gel bar for hanging fixtures
Download Pdf Manuals
Related Search