led(backlighting) color television operation
Contents
1. 2 Two brackets on the rear cover of the flat panel are required to be installed Refer to the diagram shown below for installation location 3 Finally the flat panel is assembled as shown in the following figure to prevent from toppling over due to any external force T 7 7 rn IH J N HI i P me Remarks 1 The flat panel can only be placed on a flat surface object with a surface area larger than that of the flat panel Both supporting brackets on either side must rest on the flat surface and the two brackets must be fastened with screws to the left and right corners of the flat panel s rear cover respectively 2 Any issue related to usage safety shall be the liability of the user in the event that the product is not set up properly according to requirements described in the instruction manual 3 The above figures are for reference only and the physical flat panel shall govern2. Oly Program Edit NW Select Press ENTER to confirm Press MENU to return 11 Menu Operation Configuring the Picture Menu B Picture Mode You can select the type of picture which best corresponds to your viewing requirements A Mode Changes the image mode AORE Contrast Adjusts the signal level between black and ra ua a oe white in the picture You may use Contrast when the bright part of the picture is saturated T Color Temp Normal Brightness Adjusts the base level of the signal in the picture Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture C on Tint Adjusts the balance between red and green levels ZF Aspect Ratio Full P DNR Middle Only in the NTSC mode Sai as Saturation Adjusts intensity of all colours Backlight The adjusted values are stored according to the User OTE mode Press ENTER to confirm Press MENU to return R Color Temp Select the color temperature of the picture B Aspect Ratio Select your desired aspect ratio In some special signal conditions the image can only display in the full mode R DNR Reduces screen noise without compromising video quality E Energy mode Switch the Energy mode on or off E Energy demo Switch the Energy demo on or off While both Energy Mode and Energy demo are set to On the Consumption dial will appear on the TV screen R Backlight To control the
3. CHANGHONG LED BACKLIGHTING COLOR TELEVISION LED40YD1100UA OPERATION MANUAL Please read this manual carefully before operation Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance REGULATORY INFORMATION This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Relocate the receiving antenna Increase the separation between the equipme
4. Program Selection W Using the CH CH on the panel of TV or on the remote control Press CH to increase channel number Press CH to decrease channel number W Using 0 9 Digital Buttons You can select the channel number by pressing O to 9 in ATV mode In DTV mode press number buttons and then button to select channel Mi Example To select channel e g Channel 1 Press 1 To select channel e g Channel 20 Press 2 and O in a short time To select channel e g Channel 20 1 Press 2 O and 1 in a short time Volume Adjustment B Press the VOL button to adjust the volume Wl you want to switch the sound OFF press the amp button R You can release mute by pressing the amp button or increase the volume Changing the Inout Source 1 You can select the input source by pressing the button on the remote control 2 Press the A Y button to cycle through the available input sources and press the ENTER button to confirm your choice Menu Operation How to Navigate Menus Before using the TV follow the steps below to learn how to navigate the menu in order to select and adjust different functions The access step may differ depending on the selected menu 1 Press the MENU button to display the main menu L A CHANNEL PICTURE SOUND 2 Press the lt gt button to cycle through the main menu Press the ENTER button to access the submenu 3 Press the A F button to select the desired
5. Wet a soft cloth ina mixture of lukewarm water and a little fabric softener or dish washing detergent Wring the cloth until it s almost dry and then used it to wipe the screen 2 Make sure the excess water is off the screen and then let it air dry before you turn on your TV Cleaning the cabinet To remove dirt or dust wipe the cabinet with a soft dry lint free cloth Please be sure not to use a wet cloth Extended Absence If you expect to leave your TV dormant for a long time Such as a vacation it s a good idea to unplug the power cord to protect against possible damage from lightning or power surges Disposal of old electrical appliances The waste directive 2012 19 EU on Waste Electrical and Electronic Equipment WEEE requires that old household electrical appliances must not be K disposed of in the normal unsorted municipal waste stream Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment The crossed out wheeled bin symbol on the product reminds you of your obligation that when you dispose of the appliance it must be separately collected Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance E This equipment is a Class II or double insulated electrical appliance It has been designed in such a way that it do
6. highlight the file Use the ENTER button to mark or unmark a file Press PI button to play the selected files If no file is marked all the files in the folder will be played in sequence after you press Pll button 5 Press the INFO button to display the menu screen in playing 6 Press the m button to stop the playing files 7 Press the EXIT button to return to the previous menu screen NOTE e The TV AV HDMI USB buttons can t be used when the Media files are playing 17 Troubleshooting Guide Troubleshooting Before contacting a service technician perform the following program still persists unplug the TV and call for service simple checks If any No picture no sound 1 The power cord is not plugged in and no indicator light on 2 The power is off 1 Contrast sharpness and color are Abnormal picture and set improperly sound 2 Color system is set improperly 3 Sound system is set improperly Signal source is low grade or the signal cord is defective or poorly connected oe aad Volume is at the minimum value or icture NO sound an i A TV is in mute mode Picture is spotted or with snow indicator light is green blue The signal cable is not correctly connected Blue screen AV is There is no signal input or the video displayed cable is not connected properly Picture is unclear or shaking or with black horizontal strips in PC mode PC picture is not correctly adjusted PC picture is not centere
7. carefully and do not insert with enormous force otherwise the connector or a pin might be broken e HDMI1 and MHL share one port 7 Sending the TV s digital audio signal to external audio equipment via the Digital Audio Output port 8 Check and make sure that all AV cables are connected with the corresponding ports correctly 9 Connect the AC power cable with 100 240V AC power supply NOTE e The range of input power for the TV is 100 240V 50 60Hz Do not connect the TV power input port with the AC power out of the above range e Please hold the insulated part of the plug when you are unplugging the power cable Do not touch directly the metallic part of the cable Connection and Setup Installation Guide When the TV is initially powered on a Sequence of on screen prompts will assist in configuring basic settings Press the ENTER button to start the guide Press the button to go to the next step Press the button to return to the previous menu R TV Mode Press the A button to select retail or home E Language Press the A F button to select the desired language using the OSD On Screen Display E Time Zone Press the A F button to select your time zone E Time Format Press the A V button to select 12 hour or 24 hour E Antenna Press the A F button to select the signal type for channels E Auto Tuning Scans and saves available programs automatically NOTE e f the TV doesn t receive any channels please check
8. sub item then press the ENTER button 4 Press the A W lt P button to select the desired value To save the setting press ENTER The adjustment in the OSD may differ depending on the selected menu 5 Press the MENU button to return to the previous menu 6 Press the EXIT button exit from the menu NOTE When an item in MENU is displayed gray it means that the item is not available or cannot be adjusted Some items in the menus may be hidden depending on modes or signal Sources used Buttons on the TV have the same function as corresponding buttons on the remote control If your remote control is lost or doesn t work you may use the buttons on the TV to select menus This manual focuses on operation of the remote control Configuring the Channel Menu Before your TV can begin memorizing the available channels you must specify the type of signal source that is connected to the TV i e an Air or a Cable system You can select the antenna source in the Inout Source menu E Antenna Select the signal type for channels B Auto Tuning Press the ENTER button to start Auto L CHANNEL Tuning which automatically scans and stores all available programs gt Antenna E Program Edit OL Auto Tuning 1 Press the A V button to select a channel 2 Press the CH CH button to select the following or preceding page 3 Skip Press the red button to skip the channel Favorite Press the green button to set the favorite channel
9. the main screen In MHL mode 13 MENU Press to display exit the on screen menus or to quit some operations 14 S amp S Select signal source 15 A W lt 4 P Select direction 16 ENTER Select or confirm menu item 17 EXIT Quit the current interface lt Return to the previous menu screen In MHL mode 18 Return to last viewed progra 19 VOL VOL Increase Decrease audio volume 20 CH CH Scroll to next previous channel 21 SOUND Changes the sound mode 22 PICTURE Changes the image mode 23 NUMBER BUTTONS Choose channels or password importation 24 In DIV mode press number buttons and key to select channel 25 SLEEP Set the sleep timer 9 Basic Operation Turning on and off the TV W Turn on the TV Connect the power cable and press the button to turn on the TV W Turn off the TV Press the button on the remote control to enter standby mode Do not leave your set in standby mode for long periods of time It is best to unplug the set from the mains and aerial When there is an accident power off it is recommended to unplug the power cable from the power socket W No signal There is No Signal menu on screen when there is no input signal In TV mode if there is no signal in 5 minutes the TV will turn off automatically In PC mode the TV set will automatically turn off in 830 seconds if there is no input signal When the VGA cable is connected the TV turns on automatically
10. Parents strongly cautioned TV PG Restricted Menu Operation TV 14 No one 17 and under admitted TV MA Adult audience only Fantasy violence o Suggestive dialogue Strong language a Sexual situations Violence MPAA General audience All ages admitted PG Parental guidance suggested Some material may not be suitable for children PG 13 Parents strongly cautioned Some material may be inappropriate for children under 13 Restricted Children under 17 require accompanying parent or adult guardian NC 17 No one 17 and under admitted Adult audience only MPAA rating of N A E Canada To select the Canada English Canada French Rating you want to lock or not Canada English These ratings are for programs which are using the English rating system Children Children 8 years and older G General programming Parental guidance Viewers 14 and older Adult programming EXEMPT Unblock Canada French The ratings are for programs which are using French rating system 14 Menu Operation General G Not recommended for younger children Not recommended for children under age 13 Not recommended for ages under 16 This program is restricted to adults EXEMPT Unblock E RRT Setting Press ENTER button to set RRT rating If you try to tune the TV to a program that exceeds the rating limits you set the TV will enter program lock mode and a warning message will appear on screen Follow th
11. al device such as an audio receiver Oms 250ms E Speaker If you are listening to the sound track of a broadcast or movie through an external receiver you may hear a sound echo caused by the difference in decoding speed between the TV s speakers and the speakers attached to your audio receiver If this occurs set the TV to External Speaker When you set Speaker to TV both the TV s speakers and the external speakers are on You will hear sound through both The volume of the external device can t be adjusted External When you set Speaker to External the TV s speakers are turned off You will hear sound through the external speakers only Adjusts the volume with the knob attached to the external device Configuring the Lock Menu Press your password it is factory preset to O O O 0 Then you will go the sub menu as follows If you forget the super password of 1225 is still valid 4 LOCK E Change Password You can set your private password Press the number buttons on the remote control to set the new password When the new password has been input twice the setting is finished and saved ST us successfully Change Password Tal System Lock R System Lock Set the system lock ON or OFF c canada E US To select the TV MPAA Rating you want to lock or or RRT Setting ac E Reset RRT y Age NW Select lt gt Adjust Press ENTER to confirm Press MENU to return Parental guidance suggested
12. brightness of the screen adjust the brightness of panel Backlight can be adjusted when the Energy mode is set to Off Configuring the Sound Menu E Sound Mode You can select a sound mode to suit your personal preferences Mode Changes the Sound mode Sound Mode can t be HA adjusted when the SRS is set to On 120HZ 500HZ 1 SKHZ 5KHZ 1 OKHz Adjust the curve of mm Sound Mode Standard 5 bands equalizer FOF Balance 0 Based on your favorites about which frequency band a AVC off need to be adjusted make small adjustment with certain ene P frequency band at a time It is suggested to NOT make large changes For SpDIF Type The adjusted values are stored according to the User Ten RTP mode A Speaker NV Select Press ENTER to confirm 7 7 Press MENU to return Menu Operation E Balance You can adjust the sound balance of the speakers to preferred levels E AVC AVC automatically remains on the same level of volume if you change programs Because each broadcasting station has its own signal conditions volume adjustment may be needed each time the channel is changed This feature allows users to enjoy stable volume levels by making automatic adjustments for each program E SRS You can select a desired Surround Sound mode R SPDIF Type Press ENTER button to select PCM or RAW B Audio Delay Correct audio video sync problems when watching DTV and when listening to digital audio output using an extern
13. d There is no audio signal input or No sound audio cable is not connected correctly PC picture display with The color temp is adjusted improper color incorrectly by user 18 1 Plug the power cord in 2 Turn the power on 1 Adjust the value of contrast sharoness and color 2 Set the Color system to the country broadcasting standard 3 Set the Sound system to the country broadcasting standard Use known good signal cord Adjust the value of volume Connect the signal cable correctly Connect the video cable correctly Enter into Screen menu select Auto Adjust item to perform automatic calibration and adjust Phase to solve the problem Connect the audio cable correctly Readjust the color temp or select the original color setting Troubleshooting Guide HDMI ith Raa laen The input source is not standard Plug the HDMI cable again pixels in full screen 1 Make sure the positive and the negative polarities are correct 2 Check whether there is a loose contact between the batteries and the springs The remote control does Batteries are improperly installed or not work exhausted 3 Replace the batteries Maintenance Early malfunctions can be prevented Careful and regular cleaning can extend the life of your new TV Be sure to turn the power off and unplug the power cord before you begin any cleaning Cleaning the screen 1 Here s a great way to keep the dust off your screen for a while
14. e Small Font Edge Style Default None Raised Depressed Uniform Left Shadow Right Shadow Font Edge Color Default Black White Red Green Blue Yellow Magenta Cyan FG Color Default White Red Green Blue Yellow Magenta Cyan BG Color Default Black Red Green Blue Yellow Magenta Cyan FG Opacity Default Solid Flashing Translucent Transparency BG Opacity Default Solid Flashing Translucent Transparency E Reset Restore the system settings to the factory default When the restore is complete the Installation Guide is displayed on the screen E Installation Guide This is a guide to help you to setup the TV E E POP Switch the E POP on or off E POP mode is the optimal setting for store environments E Health Remind Switch the Health Remind on or off While Health Remind is set to On a prompt picture will remind you to have a break at intervals of two hours Configuring the Time Menu E Clock You can display either the DTV Signal Stream Time or set the System Time Auto Sync If set it to ON the TV will sync the local clock E TIME according to the DTV broadcasting time automatically s Otherwise you can set the time manually Clock 2013 01 01 12 00AM DST Selects the DST Daylight Saving Time mode CT sleep off E Sleep Select the time to turn the TV to standby mode GY fate sie er automatically E Auto Sleep Select the Auto Sleep time you want The TV will enter into standby mode automatically whe
15. e instructions to temporarily unlock the program E Reset RRT Press ENTER button to reset RRT information NOTE e RRT setting and Reset RRT can be selected when the TV signal have RRT rating information Configuring the Option Menu R Language Select your preferred On Screen Display language R Audio Language Select your preferred audio language Q OPTION Available for digital channels if multiple audio languages are broadcasted TT Language English R Transparency Menu transparency selection you can Ka MEET English select menu transparency according to the different background picture Baari G R Closed Caption You can select Closed Caption if TI Closed Caption available to be displayed on the screen iy RS CC Mode Select CC Mode CC Off CC on Mute CC On cor Installation Guide Basic CC Select from below closed caption modes for Z E POP analog programs 20 CC1 2 3 4 Displays corresponding caption channel of meet analog program Usually set to CC1 for most programs Press MENU toreturn gt Text1 2 3 4 Displays corresponding text service channel of a analog program Digital CC Applies only to digital channels with closed caption Service1 2 3 4 5 6 These are different service data channels Option You can customize the closed caption display characteristics Menu Operation Mode Default Custom If set to Custom Digital CC is available Font Style Default Font O 7 Font Size Default Normal Larg
16. er is connected Consult the dealer or an experienced radio TV technician for help ENERGY STAR is a joint program of the U S Environmental Protection Agency and the U S Department of Energy helping us all save money and protect the environment through energy efficient products and practices Home mode is the default as shipped television configuration and settings Home mode is the setting in which the product qualifies for ENERGYSTAR Any changes to default as shipped television configuration and settings would change the energy consumption Enabling certain optional features and functionalities may increase energy consumption beyond the limitsre quired for ENERGY STAR qualification as applicable ENERGY STAR SS TruSurround HD is a trademark of SRS Labs Inc TruSurround HD technology is incorporated under license from SRS Labs Inc SRS TruSurround HD creates an immersive feature rich surround sound experience from two speakers complete with rich bass high frequency detail and clear dialog Safety instructions IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 7 Do not block any of the ventilation 2 Keep these instructions openings Install in accordance with the 3 Heed all warnings manufacturer s instructions 4 Follow all instructions 5 Do not use this apparatus near water 8 Do not install near any heat source such as radiators heat registers stoves or other apparatus including ampl
17. es not require a safety connection to electrical earth 19 Specifications Key Features mea LT e freon E H PICTURE ivi S Picture Effect 7 picture effects preset Standard Home Vivid Eco Movie Game User Film Mode 3 2 pull down Black Stretch 6 Picture Enhancement S O Ea 9 Motion Compensation as DLTI 11 DCTI Dynamic Skin Correction Panel Specification o Resolution Brightness od m2 Contrast Ratio Response Time 17_ Viewing Angle HA 20 Specifications O SOUND o O aa o o oo semaine 23 Sound Control Control Balance AVC Equilizer id Tanaman 29 Picture Freeze Yes MPEG2_HD DD MJPEG ss oane C SIGNAL FORMAT CAPABILITY TERMINALS USB Multi media 21 Specifications 46 SPDIF ACCESSORIES 47 Screws Stand Screws x4 4 12 Bracket Screws x2 3 10 8 9 O i k Batteries Stand Mounting Guide Warranty card Operation Manual Ol 2 Quick Start Guide 3 Remote control BASIC Info Air CH2 CH69 Cable CH1 CH136 7 Unpackaged With Base Stand mm Unpackaged Without Base Stand 907 5 64 524 5 mm Packaged Dimension L D H mm 1011 196 635 Net Weight Kg Gross Weight Kg O 4 CT O 7 co an ca ca C 22 Installation Instructions for the Flat Panel Support Bracket 1 The flat panel can easily topple over due to external force as shown in the following figure which should be prevented
18. household waste Disposal of this product must be carried out in accordance to the regulations of your local authority NOTE f the TV feel cold to the touch there may be a small flicker when it is turned on This is normal there is nothing wrong with TV Some minute dot defects may be visible on the screen appearing as tiny red green or blue spots However there have no adverse effect on the monitor s performance Avoid touching the screen or holding your finger s against it for long periods of time Doing so may produce some temporary distortion effect on the screen Getting Started Using the Remote Control When using the remote control aim it at remote sensor on the television If there is an object between the remote control and the remote sensor on the unit the unit may no operate e Point the remote control at the REMOTE SENSOR located on the television e When using this television in a very brightly lit area the infrared REMOTE CONTROL SENSOR may not work properly e The recommended effective distance for using the remote control is about 7 metres Installing Batteries in the Remote Control 1 Open the cover at the back of the remote control 2 Install two AAA size batteries Make sure to match the and ends of the batteries with the diagram inside the compartment 3 Replace the cover Battery Replacement You will need to install the batteries into the remote control to
19. ifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Safety instructions 10 Protect the power cord from being 13 Unplug this apparatus during walked on or pinched particularly at lightning storms or when unused for plugs convenience receptacles and long periods of time the point where they exit from the apparatus Only use the attachments Refer all servicing to qualified service accessories specified by the personnel Servicing is required when manufacturer the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over ON DISPOSAL The fluorescent lamp used in this product contain a small amount of mercury Do not dispose of this product with general
20. l outlets and the point where the cord exits the appliance The MAINS plug is used as the disconnect device and the disconnect device shall remain readily operable Operating Temperature 0 C to 35 C Operating Humidity lt 80 Storage Temperature 20 C to 60 C Storage Humidity lt 90 Warming Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation T this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiv
21. m USB device and write to local flash then the machine needs a restart to initiate the parameters Remote Control The buttons of the original remote control are as following CHANGHONG U J NOTE e All pictures in this manual are examples for reference only Actual product may differ from the pictures e The buttons not mentioned here are not used Definition of the buttons on the remote control 1 Enter or quit the standby mode 2 X Mute or restore sound 3 TV AV HDMI USB Quick enter signal source 4 COLOR BUTTONS Red green yellow blue key navigation link lt A Fast reverse in USB mode b gt Fast forward in USB mode dd Previous in USB mode PPI Next in USB mode 5 MTS The button can be used to switch between Stereo SAP Mono in TV mode AUDIO Switch Audio language in DTV mode 6 Press to display the Favorites program in TV mode You should setup your favorite channels in Program Edit menu 7 Kl Play Pause in USB mode CC Press to select the closed caption 8 STILL Freeze or activate the current picture W Stop in USB mode 9 INFO Press to display the current program information on the screen 10 CH LIST Press to call up the channel list Press again to exit it 11 TZ Choose the aspect ratio 12 Gi Selects the MHL mode directly Moves back to
22. make It operate following the instruction below When the batteries become weak the operating distance of the remote control will be greatly reduced and you will need to replace the batteries Notes on Using Batteries The use of the wrong type of batteries may cause chemical leakage and or explosion Please note the following e Always ensure that the batteries are inserted with the and terminals in the correct direction as shown in the battery compartment e Different tyoes of batteries have different characteristics Do not mix different types e Do not mix old and new batteries Mixing old and new batteries will shorten battery life and or cause chemical leakage e Replace batteries as soon as they do not work e Chemicals which leak from batteries may cause skin irritation If any chemical matter seeps out of the batteries wipe it up immediately with a dry cloth e The batteries may have a shorter life expectancy due to storage conditions Remove the batteries whenever you anticipate that the remote control will not be used for an extended period e The batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like CAUTION e t may result in an explosion if batteries are replaced incorrectly e Only replace batteries with the same or equivalent type Connection and Setup Cable Installation Before the installation and use please read carefully the relevant c
23. n there is CD Time Format 12 hour no operation in set time E Time Zone Select your time zone E Time Format You can choose to use 12 hour format or 24 hour format TET Press ENTER to confirm Press MENU to return Kel Time Zone Central UTC 6 Menu Operation Using USB mode W To Access Quit USB mode Connect an USB device Press Z button to display the main menu Use the A Y to highlight USB and the ENTER button to access the USB mode You may also use the signal source selection menu to exit from the USB mode NOTE s A special USB device may not be supported and may either not operate not be recognized or operate erratically e USB max load DC5V 500mA B The formats supported Movie and Music Show MPEG2 MPEG2_HD TSHD DD MJPEG Photo Show JPEG File Format Support TXT NOTE e Special algorithm documents may not be supported by the USB e The USB supports the formats mentioned above If the file format is not supported change it to the recognized format e Playback may be abnormal when playing files that are too large R Main Operating Interface Photo Music Movie Text 1 Press lt gt button to select PHOTO MUSIC MOVIE TEXT in the main menu then press ENTER button to enter 2 Use the arrow buttons and ENTER button to enter the desired disk 3 Press arrow buttons and ENTER to open the folder 4 Press CH CH button to page up or page down the files Use the arrow buttons to
24. nt and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or experienced radio TV technician for help Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment CAUTION DO not attempt to modify this product in any way without written authorization from supplier Unauthorized modification could void the user s authority to operate this product It is not recommended to keep a certain still image displayed on the screen for a long time as well as displaying extremely bright images on screen Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Warning WARNING To Reduce The Risk Of Fire Or Electric Shock Do Not Expose This Apparatus To Rain Or Moisture The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc The Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Attention should be drawn to the environmental aspects of battery disposal Don t throw used batteries in dustbin Please contact your retailer in order to protect the environment When yo
25. ontent in Warning and Safety instructions 1 Take the TV from the wrapping package and put it in a drafty and flat place NOTE e When you plug or unplug the TV computer or other equipments you must make sure that the AC power has been already shut down e When unplugging the power cable or signal cable please hold the plug the insulated part do not draw the body of the cable 2 The RF output terminal can be connected with the RF input port of the TV 3 The output AV terminal of a DVD can be connected with the AV input port of the TV through an AV cable NOTE e Component and AV can not be used at same time for they share of one audio channel Component Y signal and AV video signal share one channel e Both Audio signals of AV and COMPONENT are input from R Audio L 4 The output COMPONENT YPbPr terminal of a DVD can be connected with the COMPONENT YPbPr input port of the TV through an AV cable 5 Connect one end of the VGA cable with the VGA port on the computer connect the other end of the VGA cable with the VGA port on the TV and tighten the bolts clockwise on each end of VGA cable NOTE e While connecting the 15 pin VGA please do not insert the plug with enormous force otherwise the connector or a pin might be broken 6 Connect one end of the HDMI cable with HDMI output port connect the other end of the HDMI cable with the HDMI port on the TV NOTE e While connecting the HDMI please aim it
26. u install your TV maintain a distance of at least 4 inches between the TV and other objects walls cabinet sides etc to ensure proper ventilation Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature No naked flame sources such as lighted candles should be placed on the apparatus To prevent the spread of fire keep candles or other open flames away from this product at all times The device may malfunction when under electrostatic discharge It can be manually resumed by recycling the power off and on again CAUTION connecting the Power Cord Most appliances recommend they be placed on a dedicated circuit that is a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits Do not overload wall outlets Overloaded wall outlets loose or damaged wall outlets extension cords frayed power cords or damaged or cracked wire insulation are dangerous Any of these conditions could result in electric shock or fire Periodically examine the cord of your appliance and if its appearance indicates damage or deterioration unplug it discontinue use of the appliance and have the cord replaced with an exact replacement part by an authorized servicer Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched closed in a door or walked upon Pay particular attention to plugs wal
27. your aerial connection or the country you selected then try an auto tuning again e f the TV just receives some of the channels it means the aerial s reception isn t good enough and an antenna service is recommended Hotel Menu Press the Z button to display the Source Menu then press 2012 to enter into the Hotel Mode to adjust the relative settings E Hotel Enable Set the Hotel Enable On Off by pressing the lt gt buttons e When Hotel Mode is On the Channel function is locked E On Source Set the default signal source by pressing the lt gt buttons The default signal source will be displayed when the TV is turned on R On Channel Set the default channel by pressing the lt gt buttons The default channel will be displayed when the TV is turned on R On Volume Set the default volume by pressing the lt gt buttons The default volume is the volume when the TV is turned on Remember the default volume should be less than the maximum volume E Volume Max Set max volume by pressing the lt gt buttons When the max volume is lower than the default volume the max volume is the priority E Logo Select When the Hotel Enable and Logo Select are both ON the Logo is displayed when power on E BACKUP BACKUP means to write the TV data to USB device The function is Supposed to be used when all the settings have been completed and the Hotel Enable is ON E RESTORE RESTORE means to read data fro
Download Pdf Manuals
Related Search