Home
        PBH-154 User Manual
         Contents
1.            RS232 422 485         WLAN   e        LAN    Serial Device       Serial Device PBH 154    v   Serial Device    Figure 2 2 infrastructure mode       Wireless LAN    WLAN   Enable Disable   WLAN topology Ad hoc    Infrastructure Soft AP  Channel 1       SSID sollae     Shared Key s s    hide key   802 1x   None T     Figure 2 3 setting of Infrastructure    e SOLLAE SYSTEMS   19   http   www ezTCP com    PBH 154 User Manual Ver  1 1    2 2 2 Ad hoc    This is an easy way to set Up network since wireless LAN stations communicate each    other without an AP in this mode  It is suitable for a small scale network if wired LAN is not    available  Usually  it is called peer to peer mode               RS232 422 485 anne   er  x           WLAN PN  _ WLAN       PBH 154    Figure 2 4 Ad hoc mode       Wireless LAN    WLAN   Enable Disable  WLAN topology    Ad hoc Infrastructure Soft AP    Channel 5     SSID sollae   Shared Key onu   hide key   602 1x None T    Figure 2 5 setting of Ad hoc    e SOLLAE SYSTEMS sa   http   www ezTCP com    PBH 154 User Manual Ver  1 1  2 2 3 Soft AP    Soft AP  Software embedded Access Point  is a mode that a wireless client can act as an  AP through software embedded AP functions  Using this mode  the wireless client allow  you to communicate with not only laptops and smartphones but also devices without Ad     hoc function     PBH 154 supports Soft AP function  While operating in this function  it has 192 168 0 1 as  its IP address and assigns 
2.         To connect PBH 154 to wireless LAN  a USB wireless LAN adapter which uses a  RT3070 RT5370 chipset of Ralink Corporation is required     1 2 Features    RS232 RS422 RS485 to Ethernet and Wireless LAN converter    A X RS232 RS422 RS485  D SUB 9 pin Male  up to 230 400bps        Ethernet 10Base T or 100Base TX  Auto Sensing     IEEE 802 11 b g   amp  Infrastructure and Ad hoc network       Soft AP  setting and connection through a smartphone or laptop without an AP    available    amp  Security options  Password  WEP WPA PSK  WPA2 PSK     WPA Enterprise  EAP TLS  EAP TTLS  PEAP     e 2 Communication modes  TCP Server  TCP Client     Web configuration    e SOLLAE SYSTEMS  5  http   www ezTCP com    PBH 154 User Manual Ver  1 1  1 3 Application Examples    1 3 1 Wired LAN       1 1 Connection with a PC            RS232 422 485  G    LAN         aa     4    anos Server PC    Serial device    Figure 1 1 1 1 connection with a PC    e Multiple serial ports           RS 232 422 485  G    LAN  PBH 154  333         388 Server PC    Serial device    Figure 1 2 multiple serial ports    e SOLLAE SYSTEMS   6  http   www ezTCP com      Applied to LAN          RS232 422 485   e        LAN            PBH 154    Server PC  Figure 1 3 applied to LAN  e Applied to the Internet with an IP Share Router    G        RS232 422 485           LAN    Remote  Host  2       Serial Device PRISE    Remote  Host  1    Figure 1 4 applied to the Internet with an IP share router    e SOLLAE SYSTEMS    ht
3.       Password  It should be the same as a password that was set through the web        Souad SOLLAE SYSTEMS   37   http   www ezTCP com    PBH 154 User Manual Ver  1 1    6 2 Wireless LAN Authentication    6 2 1 Using WEP    Usable WLAN topology  Ad hoc  Infrastructure and Soft AP    AP settings    Set parameters such as authentication mode  open   shared  and key length  64   128   on your AP  If you do not know how to set the parameters  refer to its manual or ask    the manufacturer      PBH 154 settings    Input WEP Key  which is set on the AP in  Shared Key  text box of  Wireless LAN                 section   Wireless LAN  WLAN   Enable    Disable  WLAN topology     Ad hoc    Infrastructure    Soft AP  Channel 8 v  SSID  sollae  802 1x None Y    Figure 6 3 shared key settings    werse  bis    Asc         WEP128  128bits  ASCII 13 0123456789abc    Table 6 1 WEP key settings    e SOLLAE SYSTEMS   38   http   www ezTCP com    PBH 154 User Manual Ver  1 1  6 2 2 Using WPA PSK    Usable WLAN topology  Infrastructure      AP settings    Set WPA PSK or WPA2 PSK and related parameters on your AP  If you do not know    how to set AP s parameters  refer to your AP manual or ask its manufacturer        PBH 154 settings    Input WPA PSK Key  which is set on the AP in  Shared Key  text box of  Wireless LAN   section   See the Figure 6 3 shared key settings       The length of Key for WPA PSK should be 8   63 characters     6 2 3 Using WPA Enterprise     amp  Configuration of the Acc
4.    Add a parity bit to make number of 1 to be even number    Add a parity bit of 1  Add a parity bit of 0    Table 3 3 options of parity       Odd   Add a parity bit to make number of 1 to be odd number          Data bit    Choose the length of data bits  The options are 7 and 8 bits  Its default value is 8 and  7 data bit is only available on using Parity     e SOLLAE SYSTEMS   31   http   www ezTCP com    PBH 154 User Manual Ver  1 1     Stop bit  Choose the length of stop bit  The options are 1 and 2 bit s   Its default value is 1       Flow control    Select a method of flow control  The options are None  RTS CTS and Xon Xoff     Disable flow control    RTS CTS Using RTS CTS pins for flow control  hardware     Xon Xoff Xon Xoff flow control  software     Table 3 4 options of flow control        amp  Frame delimiter  HEX     This box is for setting a frame delimiter  Using this function  you can control the  network packets by specific characters  Character must be the hexadecimal  Max    length is 4 bytes     e Communication mode    Select a communication mode of PBH 154  The options are a Server and a Client       Server IP address    This box is for setting an IP address of server which is going to be connected with  PBH 154  This could be set under a client mode      amp  Server port    When PBH 154 is in Client mode  the server s local port which is listening should be    configured at this box        Listen port    This item is a port number which will wait to listen
5.  SYSTEMS   52   http   www ezTCP com    
6.  Static IP address option  a Gateway IP address of user s network  should be set in this box  Gateway is needed to connect with other networks  If it is    not correct  Internet or inter network communication will not be possible       DNS IP address    When you select Static IP address option  a DNS IP address of user s network should    be set in this box     e SOLLAE SYSTEMS   28   http   www ezTCP com    PBH 154 User Manual Ver  1 1    3 3 3 Wireless LAN    Wireless LAN    WLAN   Enable   Disable  WLAN topology     Ad hoc    Infrastructure    Soft AP  Channel 1       Shared Key  M hide key     802 1x None Wf    Figure 3 8 wireless LAN parameter    e WLAN    You can choose whether to use the WLAN       WLAN topology    You can choose one among these mode  Infrastructure  Ad hoc and soft AP mode  In  the Infrastructure mode  PBH 154 and wireless LAN devices communicate with each  other through an AP Access point   Ad hoc and Soft AP mode do not need an AP    These modes only need wireless devices     e Channel    In the case of Ad hoc and Soft AP mode  you can select a channel which is used to  form a wireless link  If you have to set two or more networks in the same place  we  recommend you to give space more than 4 channels between each of the networks     This helps to avoid the interference     e SSID Service Set Identifier     SSID is for identification of wireless networks  SSID of PBH 154 should match with  AP s SSID  because wireless devices need the same SSID for c
7.  in case of a server mode     3 4 System Information    3 4 1 MAC address  MAC address is a unique hardware address  It begins with 00 30 F9     3 42 Firmware name    Firmware file name   poc  of PBH 154     e SOLLAE SYSTEMS 2 http   www ezTCP com    PBH 154 User Manual Ver  1 1       4 Communication Mode    4 1 Overview    There are two types of connection to communicate with a remote host     TCP Server   Wait connection request from TCP clients        TCP Client   Send connection request to a TCP server     Table 4 1 comparison of communication mode    4 2 TCP Server    In this mode  PBH 154 listens to receive a TCP connection request from remote hosts   After receiving the request  and the connection is established  PBH 154 converts the raw    data from the serial port to TCP IP data and sends it to the network and vice versa     4 2 1 Key parameters    Local Port    This is a server s port number which is used in TCP connection     e SOLLAE SYSTEMS   33   http   www ezTCP com    PBH 154 User Manual Ver  1 1    4 2 2 Examples       a          u g   J LEE Serial 205   Remote Host   PBH 154 Serial Device       Figure 4 1 time chart    PBH 154 listens to connection requests    Remote host sends a connection request  SYN  segment    me Processes of the connection  The connection is established  mm Data communication is implemented on both sides    Table 4 2 states of each point       Notice the blue arrow above that the data  123  from the serial port has been sent    before 
8. AN adapter      14    LA FEN   15    ke FAEN   17     2   OBErAUon MO euer  13    2 1  Wired LAN MOGR u u ee ne   18    2 2 Wireless LAN Mode      18     22  LL AS NAC CICS ee   19    EE AROC E NT   20    NNN   21    NE NN   22    2 2 3  Authentication and FAN Eee 22    3 VER ON   23     3 1 Connecting to PB var 23  3 11 Setting by Wireless LAN    ii 23  3 1 2 Setting by Wired LAN    nn   24     3 2  WEB OHM OO ee ee PLO    PNE   25      e SOLLAE SYSTEMS  J  http   www ezTCP com    PBH 154 User Manual Ver  1 1    3 2 2 Connecting to WEB server    sine   25    3 2 3 WEB configuration Page      26    3 3 Available SR ING ne ii   27      PEN E ee   27    I NOW O e E E E E stcue sence toric ereecece nase   28       MSN   29    3234 AN NTN SL  SO ee 32  54 1  MAC RS ee 432    342  NNN   32     4 COMMUNICATION Modes    aan   33    ON ee ee KO  EE oo  221 ON po  222 PN   34    1 PN 595   451 Key ARR ee errs en eee renee ee eee 0  22 PN oan nee eee ene ee pos   5 System MN   36    32 Nr 50    gt 11 PA ee ee ee   36    Dsl  POS pet EN NN   36     6  Additional Funetl hj   37    bl SEN NO EEE EEEE   37    6 2 Wireless LAN AUTN  NUCATION    re nee a ane anne   38    VE nenne een   38    COR EEE   39    023 USING WPASENI  MPNISS asset cn   99   6 24 Advanced Settings inner   41    6 3 Frame delimiter            iii   42    04 NN   43    6 4 1 Factory reset procedure    inner      7  Shecklist in romer   44    7 4 Connection Problem KES IP unse een   44    7 2 Data Communication Problem o
9. Auto MDI MDIX  cable auto sensing     IEEE802 11b g   Ralink RT3070 5370 chipset wireless adaptor required   Operating    Temperature   85  C  without a USB WLAN adapter   Storage    Approval KC  CE  FCC    Table 1 1 hardware specification       1 5 2 Software    EE TCP  IP  DHCP  ARP  IEEE802 11b g  rOTOCO  WEP  WPA PSK  WPA Enterprise EAP TLS TTLS  PEAP     Communication TCP Server TCP Passive Connection  mode TCP Client TCP Active Connection    Table 1 2 software specification          e SOLLAE SYSTEMS   10   http   www ezTCP com    PBH 154 User Manual Ver  1 1    1 6 Dimensions             dE   ee a a    PBH 154  es    SOLLAE SYSTEMS    pme es    Figure 1 9 dimensions      Dimensions may vary according to a method of measurement        Souad SOLLAE SYSTEMS   11   http   www ezTCP com    PBH 154 User Manual Ver  1 1    1 7 Interface    1 7 1 Panel Layout    PBH 154    SOLLAE SYSTEMS       Figure 1 10 panel layout      LED  PWR  STS  TX  RX   Q  Ethernet port  10 100M    3  USB Host port  USB Wireless LAN adaptor connection    4  USB Device port  Setup   For connecting to PHPoC Writer     Power port  DC 5V       Function port  Func      Serial port  RS232   RS422   RS485       Souad SOLLAE SYSTEMS   12      PBH 154 User Manual Ver  1 1    1 7 2 LED      en Initial mode  tatus  on  gt  Button setup mode    CE data to serial port  Serial TX TX1   TX4   On   Connecting with TCP  rur data from serial port  Serial RX RX1   RX4    On   Connecting with TCP       Table 1 3 LED stat
10. In the case of using a cable  you should choose the right    type of cable for the device        You must connect the Ground pin to your device when using RS422 or RS485 as  well as RS232      amp  Setting parameters    Check if all the serial port parameters such as Baud Rate  Data bit  Stop bit and Parity    are properly set       Please contact us if you have any questions about above steps or our products     e SOLLAE SYSTEMS   45   http   www ezTCP com    PBH 154 User Manual Ver  1 1    8 Related Materials       8 1 Documents    You can find each document on our web site or included DVD in your package     Datasheet     CE certificate     amp  Declaration of ROHS Compliance    e SOLLAE SYSTEMS   46   http   www ezTCP com    PBH 154 User Manual Ver  1 1       9 Technical Support and Warranty    9 1 Technical Support  If you have any question regarding operation of the product  visit Customer Support FAQ  corner and the message board on Sollae Systems    web site or send us an email at the  following address    amp  E mail  support eztcp com     Website Address for Customer Support  http   www eztcp com en support     9 2 Warranty    9 2 1 Refund    Upon the customer s request to refund the product within two weeks after purchase     Sollae Systems will refund the product     9 2 2 Free Repair Services    For product failures occurring within 2 years after purchase  Sollae Systems provides free  repair services or exchange the product  However  if the product failure is du
11. RS232 v   115200 Y  None 7    FE   17     COM4     RS232 v     115200 v   None v    Br       1v        None      None                               TCP Server         TCP Server v      TCP Server         TCP Server             0 0 0 0    0 0 0 0          0 0 0 0       0 0 0 0             14700                14701                   14702  14702             Figure 3 6 WEB configuration page      SOLLAE SYSTEMS      26         14703                http   www ezTCP com    PBH 154 User Manual Ver  1 1    3 3 Available settings    3 3 1 Default values    DHCP  Network Local IP Address       Assigned IP address check required     mes   44              COM1 4  Communication mode    COM1  14700   COM2  14701  Local Port   COM3  14702   COM4  14703    Table 3 1 default values of major parameters       e SOLLAE SYSTEMS a  http   www ezTCP com    PBH 154 User Manual Ver  1 1  3 3 2 Network    Network    IP address Type    Static IP address    DHCP  Auto DNS server   IP address  Subnet mask  Gateway IP address    DNS IP address 0 0 0         Figure 3 7 Network parameter      IP address type  You can choose either Static IP address or Dynamic IP  DHCP  address to assign PBH   154 s IP address      IP address    This is a text box to set a static IP address of PBH 154  If you want to use DHCP IP    address will be assigned automatically       Subnet mask    When you select Static IP address option  a Subnet mask should be set in this text    box        Gateway IP address    When you select
12. SOLLAE SYSTEMS   14   http   www ezTCP com    PBH 154 User Manual Ver  1 1    1 7 7 Serial interface    PBH 154 provides four serial ports interfaced with D SUB 9 pin male connectors and you  can select the type among RS232  RS422 or RS485     0                   0             Figure 1 12 D SUB 9 pin male connector     amp  Pin Assignment in RS232    Data Terminal Ready    4 DTR RS232   OUT optional   always output active signal     Table 1 4 pin assignment in RS232         N C  Not Connected    e SOLLAE SYSTEMS oS  http   www ezTCP com    PBH 154 User Manual Ver  1 1     amp  Pin Assignment in RS422    Table 1 5 pin assignment in RS422        amp  Pin Assignment in RS485    5 I mes   om     rss   mov   required    Table 1 6 pin assignment in RS485          Serial Port Specification    Parameter Value       The number of port 4   Serial type RS232   RS422   RS485   COM1  COM4   2 400   230 400  bps   COM2  COM3   1 200   230 400  bps   Parity NONE   EVEN   ODD   MARK   SPACE          Baud rate          Data bit 8 or 7  7 data bit is only available on using Parity        Stop bit l or 2  Flow control NONE  RTS CTS  Xon Xoff             Table 1 7 serial port parameters    e SOLLAE SYSTEMS   16   http   www ezTCP com    PBH 154 User Manual Ver  1 1    1 7 8 Ethernet interface    PBH 154 has an Ethernet port which supports 10 100M bit Ethernet  Both direct and    cross over cable can be used because it automatically detects the type of cable     12345678       Figure 1 13 Etherne
13. Serial LAN   WLAN Converter    PBH 154 User Manual    Version 1 1       Sollae Systems Co  Ltd     http   www ezTCP com    PBH 154 User Manual Ver  1 1    This symbol  found on your product or on its packaging  indicates that this  product should not be treated as household waste when you wish to dispose  of it  Instead  it should be handed over to an applicable collection point for the  recycling of electrical and electronic equipment  By ensuring this product is   disposed of correctly  you will help prevent potential negative consequences to the  environment and human health  which could otherwise be caused by inappropriate disposal  of this product  The recycling of materials will help to conserve natural resources  For more  detailed information about the recycling of this product  please contact your local city  office  household waste disposal service or the retail store where you purchased this    product     X This equipment obtained certification by using 1 5M serial cable        e SOLLAE SYSTEMS sfs http   www ezTCP com    PBH 154 User Manual Ver  1 1       1 NNM  5   EE SE a no 5  gt   EEE EEE a  lo ANNEN ss   NN een  6   EE SEE EE   8    L  O cos esseses E E re  DD SN NN   10  DL OA een   10    15 2 FEN   10    NNN NN   1    E IO O a ee   12    EL Panel OU ee eh ee hehe 12    1e  D EEE EE   13    1 7 3 USB Device Port for connection with APRES eh aan   13    1 74 PROC BUTON  FUNC  ernannte   13    L75 SO MINOR      14    1 7 6 USB Host Port for Connection with WL
14. Short Slot  CTS Protection    Background Scan       Figure 6 6 advanced Settings      PHY Mode  You have three options for PHY mode   802 11    802 11b  and  802 11b g    e Short Preamble  Under a good condition of WLAN environment  you can expect a slight improvement  of performance by enabling this option  Otherwise  it is better to disable this option   e Short Slot  Using this option  you can expect some improvement in WLAN performances  If you  are in bad condition of WLAN environment  it is better to disable this option   e CTS Protection    Using this option  you can expect some improvement in WLAN performances under  WLAN environment in both 802 11b and 802 11g devices     e SOLLAE SYSTEMS   41   http   www ezTCP com    PBH 154 User Manual Ver  1 1    6 3 Frame delimiter    Frame delimiter is a value that is used when PBH 154 separates TCP segments before  sending them to network  Because TCP is a reliable stream transport service  in fact  it is  not important how the segments are divided  However  some application needs the  separation  By using this function  you can separate TCP segments based on frames of serial    data protocol          Flow control       Communication Mode    Figure 6 7 configuration frame delimiter parameter       Order of Bytes    a    Serial Data ET Network Data   TCP Segments     Direction of Data Transmission    Figure 6 8 example of delimiter    e SOLLAE SYSTEMS   42   http   www ezTCP com    PBH 154 User Manual Ver  1 1    6 4 Factory Re
15. ditions a lot of noise exists      amp  Do not use the product for a purpose that requires exceptional quality and  reliability relating to user s injuries or accidents     aerospace  aviation  health care     nuclear power  transportation  and safety purposes      amp  Sollae Systems is not responsible for any accident or damage occurring while using    the product     e SOLLAE SYSTEMS   48   http   www ezTCP com    PBH 154 User Manual Ver  1 1  10 2 Exemption from Liability    10 2 1 English version    In no event shall Sollae Systems Co  Ltd  and its distributors be liable for any damages  whatsoever  including  without limitation  damages for loss of profit  operating cost for  commercial interruption  loss of information  or any other financial loss  from the use or  inability to use the PBH 154 even if Sollae Systems Co   Ltd  or its distributors have been    informed of such damages     The PBH 154 is not designed and not authorized for use in military applications  in  nuclear applications  in airport applications or for use in applications involving explosives   or in medical applications  or for use in security alarm  or for use in a fire alarm  or in  applications involving elevators  or in embedded applications in vehicles such as but not    limited to cars  planes  trucks  boats  aircraft  helicopters  etc      In the same way  the PBH 154 is not designed  or intended  or authorized to test   develop  or be built into applications where failure could create a dan
16. e to user s    fault  repair service fees will be charged or the product will be replaced at user s expense     9 2 3 Charged Repair Services    For product failures occurring after the warranty period  2 years  or resulting from user s    fault  repair service fees will be charged and the product will be replaced at user s expense     e SOLLAE SYSTEMS   47   http   www ezTCP com    PBH 154 User Manual Ver  1 1       10 Precaution and Exemption from Liability    10 1 Precaution     amp  Sollae Systems is not responsible for product failures occurring due to user s    alternation of the product      amp  Specifications of the product are subject to change without prior notice for    performance improvement        Sollae Systems does not guarantee successful operation of the product if the    product was used under conditions deviating from the product specifications      amp  Reverse engineering of firmware and applications provided by Sollae Systems is  prohibited      amp  Use of firmware and applications provided by Sollae Systems for purposes other    than those for which they were designed is prohibited      amp  Do not use the product in an extremely cold or hot place or in a place where    vibration Is severe      amp  Do not use the product in an environment in which humidity is high or a lot of oil    exists    amp  Do not use the product where there is caustic or combustible gas        Sollae Systems does not guarantee normal operation of the product under the    con
17. ecommend using the latest version of the firmware   5 1 2 Processes     amp  Downloading the latest firmware    Download the latest firmware file uploaded at our website    amp  Connecting the USB port  Connect setup port of PBH 154 to local PC via USB cable      amp  Run PHPoC Writer program for sending the Firmware file    Run the program on PHPoC Writer     Checking firmware file and Sending          PHPOC Writer  File Function    comporr cons   EED ECS  POC file  l  g PHPOC Writer    I  File                Figure 5 1 sending firmware file      Select firmware file        Click    button  and send firmware file     e SOLLAE SYSTEMS   36   http   www ezTCP com    PBH 154 User Manual Ver  1 1    6 Additional Functions       6 1 Setting Password       password can be used to protect PBH 154 from changing environmental parameters by    non qualified hosts  The maximum length is 8 bytes of alphabet or number     PBH 154      PASSWORD   INFO       Password Settings    Password  New Password an tigi  Confirm Password       Figure 6 1 password setting    If a password for PBH 154 is set  the following window will be shown     https   www google co kr x  x     192 168 7 44          Authentication Required    The server http   192 168 7 44 80 requires 2 username and  password  The server says  ezTCP Authorization     User Name    1   Password   2     Log In Cancel          Figure 6 2 authentication with a password    D User Name  It is not required  Leave blank or put a random name 
18. ess Point    Set WPA Enterprise for authentication and radius server to communicate  If you do    not know how to set AP s parameters  refer to your AP manual or ask its manufacturer        PBH 154 supports EAP TLS   TTLS and PEAP      amp  Configuration of the product    Click configuration button Ea and select WLAN tab  select one of authentication  protocols on 802 1X item in the Security Settings     required configurations  EAP TLS ID of radius server account  client certificate    EAP TTLS ID and passphrase of radius server account  PEAP ID and passphrase of radius server account    Table 6 2 802 1X item       e SOLLAE SYSTEMS   39   http   www ezTCP com    PBH 154 User Manual Ver  1 1      How to use EAP TLS  In the case of EAP TLS  a certificate is needed to save by PHPoC Writer     The procedures are as follows       Configure the ID of radius server account     Click  Certificate  button       amor Fen me  Ce    Figure 6 4 certificate button            Save the client certificate made by radius server        Write self signed certificate            Read the certificate from a device     Figure 6 5 saving client certification         Input password for the certificate     5  Check the information of the certificate    e SOLLAE SYSTEMS   40   http   www ezTCP com    PBH 154 User Manual Ver  1 1    6 2 4 Advanced Settings    You can configure advanced settings for WLAN  We recommend using the default values    if you do not have any problem with it     Short Preamble  
19. establishing a connection  In this case  the data cannot be sent or received     e SOLLAE SYSTEMS   34   http   www ezTCP com    PBH 154 User Manual Ver  1 1    4 3 TCP Client    In this mode  PBH 154 sends request segments to a TCP server with information of   Server IP Address  and  Server Port   Once a host is listening  the connection will be  established  After then  PBH 154 converts the raw data from the serial port to TCP IP data     and sends them to the network and vice versa     4 3 1 Key parameters      Server IP Address   Server IP Address  is an address of TCP server       Server Port     Server Port  is a port number of TCP server     4 3 2 Examples              ee ES    _ Serial  Remote Host PBH 154 Serial Device         456   3 Bytes     Figure 4 2 time chart    PBH 154 sends a connection request segment right after it boots  up     The connection is established   data communication on both sides    Table 4 3 states of each point       mr processes of TCP connection    Notice the blue arrow above that the data  123  from the serial port has been sent    before establishing a connection  In this case  the data cannot be sent or received     e SOLLAE SYSTEMS   35   http   www ezTCP com    PBH 154 User Manual Ver  1 1    5 System Management       5 1 Upgrading Firmware    5 1 1 Firmware    Firmware is a type of software to operate PBH 154  If there are in need of adding  functions or fixing bugs  the firmware can be modified and released  For this reason  we    r
20. gerous situation that  may result in financial losses  damage to property  personal injury  or the death of people  or animals  If you use the PBH 154 voluntarily or involuntarily for such unauthorized  applications  you agree to subtract Sollae Systems Co   Ltd  and its distributors from all    liability for any claim for compensation     Sollae Systems Co   Ltd  and its distributors entire liability and your exclusive remedy shall  be Sollae Systems Co   Ltd  and its distributors option for the return of the price paid for  or    repair  or replacement of the PBH 154     Sollae Systems Co   Ltd  and its distributors disclaim all other warranties  either expressed  or implied  including  but not limited to  the implied warranties of merchantability and  fitness for a particular purpose  with respect to the PBH 154 including accompanying    written material  hardware and firmware     e SOLLAE SYSTEMS   49   http   www ezTCP com    PBH 154 User Manual Ver  1 1    10 2 2 French version      Documentation   La documentation du bo  tier PBH 154 est con  ue avec la plus grande attention  Tous les  efforts ont   t   mis en   uvre pour   viter les anomalies  Toutefois  nous ne pouvons garantir  que cette documentation soit    100  exempt de toute erreur  Les informations pr  sentes  dans cette documentation sont donn  es    titre indicatif  Les caract  ristiques techniques  peuvent changer    tout moment sans aucun pr  avis dans le but d am  liorer la qualit   et les    possibilit  
21. n the Serial Port    ss   45      e SOLLAE SYSTEMS   3   http   www ezTCP com    PBH 154 User Manual Ver  1 1    8     Related Materials  a ech octets ie ete ee ne ee yer   46    OL DOCS EEE   46    9 Technical Support and Warranty        ssooornnnvvvvevrnnnvvvverrnnnvnnvernnnnnnnnennnnnvnnsesnnnnnnnsesnnnnnnnssenee   47    TEN   47    VNR   47    RO enge   47    922 Free RS nee ea   47    923  Charged Repair Services  une nennen   47    10 Precaution and Exemption from Liability ses   48    NENNE   48    10 BANAN ee essen   49    102 TL English VER ON nenne een une une   49  LO 22 NNN   50    11 Revision Aston Hver  52     e SOLLAE SYSTEMS  4  http   www ezTCP com    PBH 154 User Manual Ver  1 1    1 Overview       1 1 Overview  PBH 154 is a serial to Ethernet WLAN converter that enables your serial devices to carry  robust networking capabilities  This serial to Ethernet WLAN converter offers 4 serial ports  interfaced with RS232 RS422 RS485 and a frame delimiter for packet fragmentation     PBH 154 comes preloaded with Soft AP so it can simply be linked to any devices with  WLAN by operating as an AP  It eases network construction with mobile devices such as    smartphones  tablet PCs and laptops where an AP is unavailable     Ensuring reliable operation with industrial temperature range of  40  C  85  C  along with  an overvoltage  reverse voltage and overcurrent protection circuit  makes this Serial to    Ethernet WLAN converter suitable for harsh industrial environments
22. ntrusion  ni dans des dispositifs de d  tection et  d alerte anti incendie  ni dans des dispositifs d alarme GTC  ni pour des applications    militaires     De m  me  le bo  tier PBH 154 n est pas con  u  ni destin    ni autoris   pour exp  rimenter   d  velopper ou   tre int  gr   au sein d applications dans lesquelles une d  faillance de celui ci    pourrait cr  er une situation dangereuse pouvant entra  ner des pertes financi  res  des    e SOLLAE SYSTEMS   50   http   www ezTCP com    PBH 154 User Manual Ver  1 1    d  g  ts mat  riel  des blessures corporelles ou la mort de personnes ou d animaux  Si vous  utilisez le boitier PBH 154 volontairement ou involontairement pour de telles applications  non autoris  es  vous vous engagez    soustraire Sollae Systems Co   Ltd  et ses distributeurs    de toute responsabilit   et de toute demande de d  dommagement     En cas de litige  l enti  re responsabilit   de Sollae Systems Co  Ltd  et de ses distributeurs  vis    vis de votre recours durant la p  riode de garantie se limitera exclusivement selon le  choix de Sollae Systems Co  Ltd  et de ses distributeurs au remboursement de votre  produit ou de sa r  paration ou de son   change  Sollae Systems Co   Ltd  et ses distributeurs    d  mentent toutes autres garanties  exprim  es ou implicites     Tous les boitiers PBH 154 sont test  s avant exp  dition  Toute utilisation en dehors des  sp  cifications et limites indiqu  es dans cette documentation ainsi que les court circuit  le
23. ommunication  The    default value is  sollae        e SOLLAE SYSTEMS   29   http   www ezTCP com    PBH 154 User Manual Ver  1 1    e Shared Key    The authentication can be divided to two big parts  One is Open System and the  other is Shared Key  The first one consists 2 frames  request and response  Because  there is no checking process  the shared key is not needed in this mode  The second  one uses shared key for the authentication    WLAN Authentication supported by PBH 154 and usable authentication for each    topology are as follows     Soft AP  None   No security set   0   0   0  64  128 bit key   0   0   Oo    Table 3 2 WLAN Authentication       e SOLLAE SYSTEMS   30   http   www ezTCP com    PBH 154 User Manual Ver  1 1    3 3 4 Serial   Communication    Serial   Communication    Frame delimiter  HEX     COMI COM  COM3 COM4  Serial Type  Baud rate  bps   Data bit  Stop bit  Flow control  Communication Mode TCP Server w   TCP Server w  Server IP Address 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0  Server Port 14700 14701 14702 14703    Figure 3 9 serial communication parameter   amp  Serial type    You can select a type of serial communications in this combo box  PBH 154 has  RS232  RS422  Full duplex  and RS485  Half duplex  interface       Baud rate  Select a baud rate for serial data communication  The unit is bit sec      Parity    You can make a decision whether you use the parity bit or not with this option  There  are five different options below     Disable parity bit 
24. one of 192 168 X X IP addresses to each client   A simple DHCP    server               WLAN    PBH 154    fey   Soft AP mode  San    Smart  Phone       Figure 2 6 Soft AP mode    You can set Soft AP function manually on  Wireless LAN  section like the figure below        Wireless LAN    WLAN   Enable Disable   WLAN topology Ad hoc Infrastructure    Soft AP  Channel 5     SSID sollae   Shared Key ln      hide key   802 1x None       Figure 2 7 setting of Soft AP    e SOLLAE SYSTEMS sdl   http   www ezTCP com    PBH 154 User Manual Ver  1 1    2 2 4 Key terms  e SSID Service Set Identifier     It is a name to identify the particular wireless LAN  So every single station should  have the same SSID to communicate in the network  In the case of infrastructure  mode  you have to set the same SSID of an AP to PBH 154  Otherwise  it will not  communicate at all  The maximum length of this parameter is 31 bytes and the    default is  sollae        e Channel    Wireless LAN stations communicate through the ISM  Industrial  Scientific  and  Medical  band which has the range of frequencies around 2 4GHz  IEEE 802 11  specification divides this band into 14 channels in every 5MHz  If you install more  than one wireless network in the same area  the channels should be set more than 4    channels apart to avoid interferences     2 2 5 Authentication and Security   amp  Authentication    A wireless LAN station should get authentication from the AP in the infrastructure    network  There are 
25. p or smartphone to Wireless LAN  Wi Fi  network using PBH   154 s Soft AP function  The SSID is    phpoc_MAC Address s last 6 digit      e g   phpoc_000001        WI FI NETWORKS SEARCHING    phpoc_070104    Connected       Figure 3 1 connecting Wireless LAN using Soft AP       Checking IP address   After connection  PBH 154 has 192 168 0 1 as its IP address and assigns one of    192 168 X X IP addresses to each client     e SOLLAE SYSTEMS   23   http   www ezTCP com    PBH 154 User Manual Ver  1 1    3 1 2 Setting by wired LAN     WEB browser and LAN adaptor are required on your PC       LAN Connection  Connect PBH 154 to your PC via a LAN cable      2  USB Connection  Connect PBH 154 to your PC via a USB cable       Device driver will be automatically installed when you connect PBH 154 to your PC   When automatic installation fails  download and install the driver on ST Micro s    web site       STM32 USB Virtual Com Port Driver Download page   http  www stcom web catalog tools FM147 CL1794 SC961 S51533 PF257938       G  Finding assigned IP address  After connecting to PHPoC Writer  check the assigned IP address on Network  information     PHPOC Writer  File Function                   Device Firmware information    Network information       Name Server  0 0 0 0    IPv6 network information    Figure 3 2 finding assigned IP address    e SOLLAE SYSTEMS   24   http   www ezTCP com    PBH 154 User Manual Ver  1 1    3 2 WEB Configuration    3 2 1 Procedures       1  WEB browser R
26. s  chocs  les utilisations non autoris  es  pourront affecter la fiabilit    cr  er des  dysfonctionnements et ou la destruction du bo  tier PBH 154 sans que la responsabilit   de  Sollae Systems Co   Ltd  et de ses distributeurs ne puissent   tre mise en cause  ni que le    bo  tier PBH 154 puisse   tre   chang   au titre de la garantie        Rappel sur l   vacuation des   quipements   lectroniques usages    Le symbole de la poubelle barr   pr  sent sur le bo  tier PBH 154 indique que vous ne  pouvez pas vous d  barrasser de ce dernier de la m  me fa  on que vos d  chets courants   Au contraire  vous   tes responsable de l   vacuation du bo  tier PBH 154 lorsqu il arrive en  fin de vie  ou qu il est hors d usage  et    cet effet  vous   tes tenu de le remettre    un  point de collecte agr     pour le recyclage des   quipements   lectriques et   lectroniques  usag  s  Le tri  l   vacuation et le recyclage s  par  s de vos   quipements usag  s permettent  de pr  server les ressources naturelles et de s assurer que ces   quipements sont recycl  s  dans le respect de la sant   humaine et de l environnement  Pour plus d informations sur les  lieux de collecte des   quipements   lectroniques usag  s  contacter votre mairie ou votre    service local de traitement des d  chets     e SOLLAE SYSTEMS LE http   www ezTCP com    PBH 154 User Manual Ver  1 1    11 Revision History    2014 08 27 O Initial release  2014 09 25 O Modified typos and updated serial specification       e SOLLAE
27. s des produits      amp  Copyright et appellations commerciales    Toutes les marques  les proc  d  s  les r  f  rences et les appellations commerciales des    produits cit  s dans la documentation appartiennent    leur propri  taire et Fabricant respectif      amp  Conditions d utilisations et limite de responsabilit      En aucun cas Sollae Systems Co  Ltd  ou un de ses distributeurs ne pourra   tre tenu  responsable de dommages quels qu ils soient  int  grant  mais sans limitation  les  dommages pour perte de b  n  fice commercial  interruption d exploitation commerciale   perte d informations et de donn  es    caract  re commercial ou de toute autre perte  financi  re  provenant de l utilisation ou de l incapacit      pouvoir utiliser le bo  tier PBH 154   m  me si Sollae Systems Co  Ltd  ou un de ses distributeurs a   t   inform   de la possibilit      de tels dommages     Le boitier PBH 154 est exclusivement pr  vu pour un usage en int  rieur  dans un  environnement sec  temp  r     10   C     40  C  et non poussi  reux  Le bo  tier PBH 154 n est  pas pr  vu  ni autoris   pour   tre utilis   en ext  rieur  ni de fa  on embarqu  e dans des engins  mobiles de quelque nature que ce soit  Voiture  camion  train  avion  etc      ni en milieu  explosif  ni dans des enceintes nucl  aires  ni dans des ascenseurs  ni dans des a  roports  ni  dans des enceintes hospitaliers  ni pour des applications    caract  re m  dical  ni dans des  dispositifs de d  tection et d alerte anti i
28. set    It is a function to physically initialize all the setting     6 4 1 Factory reset procedure    Status of  Step Procedure Status of PBH 154  STS LED  i Press the Function button shortly   Enter to button setup 5  n   less than 1sec   mode  Keep pressing the Function      2 Ready to reset Blinks rapidly  button over 5 seconds     Check STS LED  3 Reset enabled Off  after 5 seconds   a After the step 3  release the Progressing 5  n  function button within 2 seconds initialization  Rebooting automatically Off    Table 6 3 factory reset procedure         Ifyou keep pressing the function button over 2 seconds after the step 3  product    state will return to the step 2        Soft AP function will be activated in the button setup mode  Thus  STS LED can be  blink if a wireless LAN client is linked     e SOLLAE SYSTEMS   43   http   www ezTCP com    PBH 154 User Manual Ver  1 1    7 Checklist in Trouble       When you have problem with PBH 154  make sure all the followings first     7 1 Connection Problem over TCP IP     amp  Connection with the network    Check if PBH 154 is successfully connected in network     RX1 and TX1 LED are blink alternately    Not connecting a LAN cable or a    RX1 TX1  USB WLAN adapter  RX1 TX1    RX2 and TX2 LED are blink alternately      RX2 TX2  Not connecting to the WLAN  RES e  RX2 TX2    TX1  RX2 and RX1  TX2 are blink alternately    RX1 TX1  Without obtaining an IP address RX2 TX2  RX1 TX1    by DHCP       Table 7 1 LED status according to s
29. t connector interface  RJ45      amp  Ethernet port interface  RJ45     ES en  MS re  i       EEE EEE  a   Tu  Table 1 8 RJ45 the Ethernet port interface     LED indicator of RJ45    Connected to 100M Ethernet  Connected to 10M Ethernet    Table 1 9 LED indicator of RJ45       n  Green ff  n  ff    O  Yellow  O    e SOLLAE SYSTEMS er http   www ezTCP com    PBH 154 User Manual Ver  1 1       2 Operation Mode    2 1 Wired LAN Mode    PBH 154 operates in LAN mode when you connect a LAN cable  To use this mode  you    are required to either remove a USB wireless LAN adapter or set WLAN disabled              RS232 422 485  G    LAN       PBH 154  Serial device    Figure 2 1 1 1 network with a PC    2 2 Wireless LAN Mode  If the USB WLAN adapter is connected  PBH 154 operates in WLAN mode     PBH 154 supports IEEE802 11b g  IEEE802 11 standard that is called Wi Fi has three    network topologies  Infrastructure  Ad hoc and Soft AP mode     For security  PBH 154 supports WEP  WPA PSK and WPA Enterprise  EAP TLS TTLS  PEAP        To connect PBH 154 to wireless LAN  a USB wireless LAN adapter which uses a  RT3070 RT5370 chipset of Ralink Corporation is required     e SOLLAE SYSTEMS   18   http   www ezTCP com    PBH 154 User Manual Ver  1 1  2 2 1 Infrastructure    In this mode  every wireless LAN station communicates through an Access Point  AP    which is able to interface with both Wireless LAN and Ethernet  so that all stations can be    connected to Ethernet     Server PC       
30. tp   www ezTCP com    PBH 154 User Manual Ver  1 1    PBH 154 User Manual Ver  1 1       Applied to a serial tunneling system               RS232 422 485            LAN   Serial Devi   erial Device LAN   INTERNE Serial Device  000  009 00e  000 og  000 800       PBH 154 PBH 154    Figure 1 5 applied to a serial tunneling system    1 3 2 Wireless LAN    1 1 network with a PC            RS232 422 485 pr         WLAN s         Serial Device PBH 154     Server PC    Figure 1 6 1 1 network with a PC      1 1 network with a PC through an AP            RS232 422 485        0 WLAN P rn FE x  un  WLAN           PBH 15  Serial Device x       Figure 1 7 1 1 network with a PC through an AP    e SOLLAE SYSTEMS   8  http   www ezTCP com    PBH 154 User Manual Ver  1 1     amp  Internet connection with a xDSL cable modem            RS232 422 485         WLAN Server PC      LAN      e   e WAN f WLAN        3  LAN Cm     Cable Modem    Serial Device PBH 154      Figure 1 8 Internet connection with an xDSL cable modem    1 4 Components    PBH 154 s body   e DVD  including utilities and documents  optional     USB WLAN adapter  optional      DC 5V power adapter  optional     amp  RS232 cable  optional        Mounter  optional     e SOLLAE SYSTEMS   9   http   www ezTCP com    PBH 154 User Manual Ver  1 1    1 5 Specification    1 5 1 Hardware    4 x RS232 422 485  Serial COMI  COM4  2 400bps   230 400bps  COM2  COM3  1 200bps   230 400bps  Interface 10 Base T   100 Base TX Ethernet  Network    
31. two methods for the authentication  Open System and Shared Key       WEP  Wired Equivalent Privacy     The WEP is a security protocol for wireless LAN  You need to set 64 bit or 128 bit key     You can use both hexadecimal and ASCII code for this       WPA  Wi Fi Protected Access     WPA is a security standard for users of devices equipped with Wi Fi wireless  connection  It is expected to replace the original Wi Fi security standard  Wired  Equivalent Privacy  WEP   compensating the weakness of it  There are two modes  about the user authentication in WPA security  One is Enterprise which has an  authentication server and the other is PSK  Pre Shared Key  which does not have any    servers       WPA2    As final security of Wireless LAN  The Counter Mode with Cipher Block Changing  Message Authentication Code Protocol  CCMP  was suggested for IEEE80211    Wireless LAN standard  to replace the TKIP CCMP uses Advanced Encryption  Standard  AES  which is adopted by WPA2  WPA 2 has also both Enterprise and PSK    mode     e SOLLAE SYSTEMS 12 http   www ezTCP com    PBH 154 User Manual Ver  1 1    3 WEB configuration       3 1 Connecting to PBH 154    3 1 1 Setting by Wireless LAN    Button setup mode allows you to set parameters through wireless LAN as follows       Connecting to a USB WLAN adapter        Supplying power      Entering button setup mode   Push the Function Func   button shortly  STS led will be ON      Connecting to Wireless LAN using Soft AP   Connect your lapto
32. un a WEB browser on your PC               2  Connection Connect to the WEB server          3  Configuration Set the values of the parameters properly          Save the setting with the  save  button    Figure 3 3 WEB configuration    3 2 2 Connecting to WEB server    Input the IP address of PBH 154 on the address bar  If you use button setup mode   please connect to 192 168 0 1     c        Figure 3 4 mobile web browser  Wireless LAN        x        ON    http   192 168 7 44     Figure 3 5 a PC web browser  Wired LAN           Souad SOLLAE SYSTEMS   25  http   www ezTCP com    PBH 154 User Manual Ver  1 1    3 2 3 WEB configuration page    X  J    PBH 154 WEB Configura x         gt  C 9192 168 x0 yy       SOLLAE SYSTEMS    PBH 154    SETTINGS   PASSWORD   INFO    Network    IP address Type   Static IP address    DHCP  Auto DNS server   0 0 0 0  0 0 0 0  0 0 0 0    0 0 0 0       IP address          Subnet mask          Gateway IP address                DNS IP address       Wireless LAN    WLAN Enable    Disable    WLAN topology Ad hoc   Infrastructure Soft AP    Channel 1 v        SSID sollae             Shared Key   X hide key           802 1x    Serial Type  Baud rate  bps   Parity   Data bit   Stop bit   Flow control    Frame delimiter   HEX   Communication  Mode    Server IP Address  Server Port    Listen Port    None       Serial   Communication    coM1  RS232 v   115200 v   None Y  ay    iv     COM2   RS232 v   115200 v   None v     in       None v    None v       COM3  
33. us on the top panel      Please refer to the  Table 7 1 LED status according to symptoms  for LED pattern  when there is a problem on PBH 154     1 7 3 USB Device Port for connection with a PC    USB device port is for connection with a PC  You can access to PBH 154 via PHPOC Writer  after connecting a USB cable to this port  Moreover  you can supply DC 5V power to PBH   154 through this port     1 7 4 Function Button  Func     If this button is pressed  PBH 154 operates in Button setup mode  This mode is used for    factory reset and setting parameters through Wireless LAN        e SOLLAE SYSTEMS  gt 13   http   www ezTCP com    PBH 154 User Manual Ver  1 1    1 7 5 Supplying Power    PBH 154 provides the following two ports for supplying power  You can choose one of    the two options       Power port    The Power port uses DC 5V and its specification is as follows                             Figure 1 11 specification of power port      USB device port  Setup Port     You can supply DC 5V power through this port  Note that unstable operation may be    occurred in case of supplying power via this port due to insufficient current     1 7 6 USB Host Port for Connection with WLAN adapter    PBH 154 provides a USB host port for a USB WLAN adapter  You can connect PBH 154 to  Wireless LAN by connecting the WLAN adapter to this port        Caution  Only adapters using Ralink RT3070 5370 chipsets are available       Caution  WLAN cannot be used with Ethernet at the same time     e 
34. ymptoms       Souad SOLLAE SYSTEMS   44   http   www ezTCP com    PBH 154 User Manual Ver  1 1     amp  Checking parameters related with TCP IP  When PBH 154 has a private IP address  an IP address of a PC and PBH 154 need to    be on the same network  Check if the IP address and local port number are correct   In the case of a fixed IP address  related items such as subnet mask  gateway IP  address and DNS IP address should be configured     TCP Server side TCP Client side    Local IP Address  Local Port  Subnet Local IP Address  Server s IP Address     Mask  Gateway IP Address  DNS IP Server s Port  Subnet Mask  Gateway IP  Address and etc  Address  DNS IP Address  and etc        Table 7 2 major parameters related with TCP IP    PING Test    Confirm the connection over the network by PING test  If PBH 154 does not send any    reply from the request  check the network environment     e Network Firewall    In the case of networks with strong security  the access may be denied by their  firewall  Under this circumstance  consult the network administrator to release ports  you want to use   Ex  TCP 14700  TCP 80     e Communication Mode    To make TCP connection  both a server and client must exist  If there are only servers    or clients  TCP connection cannot be established     7 2 Data Communication Problem on the Serial Port     amp  Connection of Pins    Check if each connection of pins is right  Refer to the chapter 1 7 7 Serial interface to  find out the pin assignment  
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
SCC-DI01 Isolated Digital Input    Kenmore 795.7756 Refrigerator User Manual  ECOLOGIA - MEDIO AMBIENTE ER105D - Celdas  Page 1 Page 2 りご使用になる前に、この 「安全上のご注意」 をよくお  Laser Power and Energy Meters  3Com L-510 Owner's Manual  Gato de botella  お客様にお渡しする『表示物』 は 説明責任を全うしてぃますヵ`?  Roto-Manu MKII 2.1    Copyright © All rights reserved. 
   Failed to retrieve file