Instruction Manual - Test Equipment Depot
Contents
1. 99 Washington Street Melrose MA 02176 TestEquipmentDepot com2. On long cable runs the high frequency detail can be lost resulting in a soft looking picture This will first show up in text where the characters will lose their sharp edges Adjust the EQ can sharpen the image While viewing an image on a display connected to the Receiver insert a small screwdriver into the EQ adjustment on the side panel of the Receiver Rotate gently until the best EQ setting as determined by image clarity is achieved Then insert the screwdriver into the GAIN adjustment and rotate gently until the best Gain setting as determined by the brightness of the image is achieved You may notice an increase in video noise sometimes called snow in the picture at higher gain settings so a compromise will have to be found if the cable run is at or near the maximum length EQ and GAIN settings are retained by the Receiver 6 0 TROUBLESHOOTING Other than faulty cables or attempting to use the product over too great of distances there are seldom problems with these Video Extender products lf there is no image present at the remote location connect the display device directly to the source to make certain that the problem is not in the display If an image is present under those circumstances make certain the transmitter and receiver s are receiving power Next make certain your Cat 5 5E 6 cable is defect free and the RJ 45 connectors are securely attached to the cable at both ends After trying the above suggest
3. 2 Weight 1T CT 421 422 Power Requirement Each Unit Environmental Operating Temperature Operating Humidity Storage Temperature Storage Humidity Warranty Limited Warranty Regulatory Approvals Encoder Decoder Unit Power Supply Cable Requirements CAT 5 5E or CAT 6 Model Numbers 1T CT 421 1T CT 422 Accessories Included 2x Power Adapter 1x User Manual 1x RGBHV via HD 15 1x RGBHV via HD 15 1x Ea via RJ 45 Connector Up to 1280x1024 60Hz 350MHz Video 0 75mV Sync 5V TTL 15 70KHz 30 1 70Hz Equalization and Gain 180 Meters 590 25 5x44 3x72 5mm 1 x1 75 x2 85 Ea 90g 0 2 Ibs Ea External Power Supply 5 VDC 2A Locking DC 0 to 70 C 32 to 158 F 10 to 90 Non condensing 40 to 70 C 40 to 158 F 10 to 90 Non condensing 2 Years Parts and Labor FCC CE RoHS UL CUL CE PSE GS RoHS Network Grade Premium Cables Transmitter for RGBHV Receiver for RGBHV US UK or Euro CAT 5 Extender Series 3 0 CHECKING PACKAGE CONTENTS Before attempting to use this unit please check the packaging and make certain the following items are contained in the shipping carton e 1x Transmitter 1x Receiver unit e 2x Power Adapters e 1x Operations Manual Note Please retain the original packing material should the need ever arise to return the unit If you find any items are missing contact your reseller or TV One immediately Have the Model and Serial Number and Invoice ava
4. A 02176 TestEquipmentDepot com 4 2 1T CT 421 Transmitter i a VONCTASK 1T CT 421 VIDEO TRANSMITTER 1 Connect the source device s video output to the VIDEO IN connector of the Transmitter using the appropriate cable 2 Connect a Cat 5 5E or Cat 6 cable to the UTP OUT connector of the Transmitter 4 3 1T CT 422 Receiver 5VDC CHS TASK 1T CT 422 ino O30IA UTP IN VIDEO RECEIVER GAIN EQ ey esoe O OO k 3 _ f oa VIDEO OUT 1 At the remote location connect the other end of the Cat 5 5E or Cat 6 cable to the UTP IN connector of the Receiver 2 Connect the VIDEO OUT connector of the Receiver to the video input of the remote display or other device using the appropriate cable 3 Connect the DC power supplies to the units and then to the AC outlets 4 Turn on the source device and remote display The source signal should now appear on the remotely located display If not consult the Troubleshooting section of this manual 5 0 OPERATING THE UNITS Once the connections have been made and power applied there is little in the way of operational adjustments required with the possible exception of the Equalization and Gain adjustments 5 1 Equalization and Gain Adjustments On the 1T CT 422 Receiver locate the GAIN and EQ Equalization adjustments on the side of the Receiver Before EQ GAIN EQ acusi J Oo After EQ adjust
5. Test Equipment 99 Washington Street Depot Melrose MA 02176 Phone 781 665 1400 1 800 517 8431 Toll Free 1 800 517 8431 b Instruction Manual 1T CT 420 Series RGBHV Cat 5 Extender 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 Table of Contents Introduction Specifications Checking Package Contents Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance TestEquipmentDepot com 1 0 INTRODUCTION Thanks for purchasing this Cat 5 Extender Product from TV One This Product line is designed to transport VGA signals using CAT 5 5E or CAT 6 premium grade network cables Our professional video conversion products have been serving the industry for over twenty years TV One offers a full line of high quality Seamless Switchers Video Scalers Up Down Cross Converters Analog Digital Converters SD HD SDI HDMI DVI Format Converters Standards Converters TBC Frame Synchronizers Matrix Routing Switchers Signal Distribution Amplifiers and Cat 5 Transmission Systems 1 1 Liability Statement Every effort has been made to ensure that this product is free of errors TV One cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use It is the responsibility of the user of the hardware to check that it is suitable for his her requirem
6. ents and that it is installed correctly All rights reserved No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical including photocopying recording or by any information storage or retrieval system without the written consent of the publisher TV One reserves the right to revise any of its hardware and software following its policy to modify and or improve its products where necessary or desirable This statement does not affect the legal rights of the user in any way All third party trademarks and copyrights are recognized The TV One logo TV One task and CORIO are the registered Trademarks of TV One All other trademarks are the property of their respective holders 1 2 Features The 1T CT 420 Series VGA Extender product line has many features that enable it to perform in a superior manner Among those features you will find Transmit PC Video content via Cat 5 5E or 6 Cable Resolutions to 1280x1024 60Hz Range up to 180 meters 590 Gain and Equalization adjustments on the Receiver small Footprint and light weight Exclusive TV One Captive DC Power Plug 2 0 SPECIFICATIONS Video Inputs 1T CT 421 Video Outputs 1T CT 422 UTP I O 1T CT 421 422 Video Performance Maximum Resolutions Video Bandwidth Input Signal Levels Horizontal Freq Range Vertical Freq Range Signal Adjustments 1T CT 422 Receiver Maximum Range 1T CT 421 422 System Mechanical H W D 1T CT 421 42
7. ilable for reference when you call 4 0 CONNECTING THE HARDWARE Please study the panel drawings below and become familiar with the signal input outputs power requirements inputs plus any controls present Note The resolution capability of the remotely located display devices must be capable of displaying the output of the source device Before connecting the CAT 5 extender system verify that the display device on the receiving end can support the output resolution and signal format by connecting it directly to the source device 4 1 Cat 5 5E 6 Cable Notes Pins and pairing Make sure the CAT5 5E 6 cable pin assignments are standard The correct pairing is straight through pin to pin with pairing as follows 12345678 PINS TWIST DENSITY PINS im ma i iil Twist density UTP cable pairs have different twist densities twist pitches There are two pairs with high density twist and two pairs with low density Colors vary by manufacturer Twist densities can be seen by stripping off about 10 cm 4 of insulation and visually inspecting Pairs 1 2 and 7 8 should be assigned to high density twists Failure to assign correct twist densities can result in image jitter The ABCD picture shows typical UTP cable with pairs A and C showing a high pitch twist assign assign to pin pairs 1 2 amp 7 8 and B and D with low pitch twist assign to pin pairs 3 6 amp 4 5 4 Test Equipment Depot 800 517 8431 99 Washington Street Melrose M
8. ions should the problem still persist contact your dealer for additional suggestions before contacting TV One Should the dealer s technical personnel be unable to assist you contact TV One via our support website http tvone crmdesk com Create a technical support request on the site and our support team will respond within a short period of time 7 0 LIMITED WARRANTY LIMITED WARRANTY With the exceptions noted in the next paragraph TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase Should this product in TV One s opinion prove defective within this warranty period TV One at its option will repair or replace this product without charge Any defective parts replaced become the property of TV One This warranty does not apply to those products which have been damaged due to accident unauthorized alterations improper repair modifications inadequate maintenance and care or use in any manner for which the product was not originally intended Items integrated into TV One products that are made by other manufacturers notably computer hard drives and liquid crystal display panels are limited to the term of the warranty offered by the respective manufacturers Such specific warranties are available upon request to TV One lf repairs are necessary under this warranty policy the original purchaser m
9. ust obtain a Return Authorization Number from TV One and return the product to a location designated by TV One freight prepaid After repairs are complete the product will be returned freight prepaid LIMITATIONS All products sold are as is and the above Limited Warranty is in lieu of all other warranties for this product expressed or implied and is strictly limited to two years from the date of purchase TV One assumes no liability to distributors resellers or end users or any third parties for any loss of use revenue or profit TV One makes no other representation of warranty as to fitness for the purpose or merchantability or otherwise in respect of any of the products sold The liability of TV One with respect to any defective products will be limited to the repair or replacement of such products In no event shall TV One be responsible or liable for any damage arising from the use of such defective products whether such damages be direct indirect consequential or otherwise and whether such damages are incurred by the reseller end user or any third party 8 0 REGULATORY COMPLIANCE The 1T CT 420 Series Extender has been tested for compliance with appropriate FCC and CE rules and regulations The Power Adaptor Supply has been tested for compliance with appropriate UL CUL CE PSE GS Rules Regulations and or Guidelines This Product and Power Adapter is ROHS Compliant End of Manual 8 Test Equipment Depot 800 517 8431
Download Pdf Manuals
Related Search