1x COMBAT DOT SIGHT
Contents
1. UJ Ui X DIAGRAM Objective lens 2 Weaver picatinny mount 4 3 Windage elevation adjustments 4 Eyepiece 5 On off switch 6 Battery cap 7 Mounting screws WARNINGS AND PRECAUTIONS Before handling the combat dot sight read and understand the contents of your firearm s manual warnings and the Sightmark combat dot sight manual Follow all standard safety precautions and procedures during firearm operation even when the combat sight is not in use Failure to follow standard firearm safety precautions and procedures as well as the above warnings is dangerous and may result in serious injury damage to property death DO NOT disassemble the dot sight for any reason as this will void the warranty and could be hazardous Any internal work should be handled by the manufacturer INSTALLATION It is recommened to have the dot sight mounted by a professional gunsmith However if attempting to mount the dot sight without professional assistance please read and strictly adhere to the following directions WARNIING never attempt to mount the dot sight on a loaded firearm Check that the weapon is unloaded Remove the bolt firing pin to ensure the weapon is incapable of firing 2 Install the red dot sight onto a weaver or pictainny base Tighten the mounting screws 7 between 45 65 pounds of tourque 3 Once the alignment is checked tighten the mounting screws Take care not to overtighten the2. sending it to the wrong address and other problems associated with unexpected packages Check that the firearm s mount is securely attached Also verify the dot sight is mounted securely to the rifle If there is any shifting retighten the mounting system according to the mounting instructions but do not overtighten 2 When test firing a rifle to check the point of impact relative to windage and elevation adjustments firing from a shooting rest will help eliminate shifting during firing 3 Be sure to use factory loaded ammunition of the same bullet type weight and preferably lot number when sighting in the reflex sight WARRANTY Please visit www fire field com for warranty details and information P Product distributed by Se I 2201 Heritage Parkway Mansfield TX 76063 www fire field com
3. Ix COMBAT DOT SIGHT USER MANUAL Ul Aj rafilelG 7 a 7 d Victory justifies Firefield delivers high quality and durability to every intense moment Firefield products consist of riflescopes flashlights laser sights reflex sights bore sights AK and Quad rail mounts magazines binoculars and other shooting accessories Designed for heart pounding fast paced hunting personal defense or Xtreme shooting sports Firefield is the key to victory Firefield technology is designed to serve the next generation of shooters Transform fear to power panic to excitement and chaos to glory with Firefield Prepare for victory with the latest Firefield products Firefield Victory Justifies Everything Firefield Ix Combat Dot Sight sss l 6 English L appareil de vision de nuit NV Spirit 4x50 7 12 Fran ais Dispositivo de la visi n nocturna NV Spirit 4x50 13 18 Espa ol To view this manual in other languages or for more information please visit www fire field com Sellmark Corporation all rights reserved FIREFIELD Ix COMBAT DOT SIGHT The Firefield x Combat Sight is a versatile optical gunsight designed like a universal scope for accurate short and medium range shooting Featuring an illuminated red or green circle dot reticle the Firefield x Combat Sight has up to five brightness settings that can adapt to any terrain The brightne
4. o make adjustments The windage and elevation adjustments are MOA meaning click moves the point of impact inch at 100 yards Adjustments can be both felt and heard 3 Once adjustments are complete screw the windage and elevation caps onto the adjustments INSTALLING THE BATTERY The Firefield 1x Combat Dot Sight is powered by one CR2032 battery Should the reticle grow dim or not illuminate the battery needs to be replaced To install a new battery Unscrew the battery cap 6 counter clockwise and remove the battery 2 Insert a new battery with the positive side facing up and screw the cap back on clockwise Do not overtighten OPERATING THE ON OFF SWITCH 20 cw HE DEM AEA In order to activate the Firefield 1x Combat Dot Sight Locate the on off switch 5 and rotate the adjustment switch to the desired illumination setting of l 5 2 After use turn the switch to the off position key marked by R or G MAIN TENANCE Proper maintenance of the Firefield lx Combat Dot Sight is recommended to ensure longevity It is recommended that when the sight becomes dirty that it is wiped down the a dry or slightly damp cloth Blow dirt and debris of all optics and then clean lenses with a lens cleaning cloth No futher maintenance is required TROUBLESHOOTING Never ship back a product without getting proper authorization beforehand Doing so could result in losing the dot sight due to a multitude of reasons i e
5. screws 4 4 Ensure the dot sight provides the desired eye relief by moving the weapon into the shooting position 5 Check that the dot sight is evenly mounted and boresight the sight BORESIGHTING THE Ix COMBAT DOT SIGHT Boresighting and test firing should be performed safely on a firing range Laser boresights are a quick and accurate method to sighting in a dot sight Below is the traditional method of boresighting When mounting the dot sight on a bolt action rifle remove the bolt or when mounting to a semi automatic rifle disassemble the rifle until there is a straight line of sight through the bore 2 Use a target at least 20 yards to 50 yards away when sighting in the dot sight Look through the bore of the weapon and locate the bullseye of the target 3 Sight in the target through the bore and then make windage and elevation adjustments to the dot sight until the reticle is centered on the bullseye To verify the dot sight is accurately sighted in always fire a three shot test group at 100 yards 4 If you are still off center make the necessary amount of adjustments to move the reticle to the center of the target 5 Again fire a three shot test group and use the center of the group to determine final adjustments OPERATING THE WINDAGE AND ELEVATION ADJUSTMEN In order to make windage and elevation adjustments Remove the caps covering the windage and elevation adjustments 3 2 Use a flat head screwdriver t
6. ss settings allow for optimal shooting in low light scenarios without the inherent problems of fiber optics or auto adjusting systems The MOA adjustment provides precision accuracy perfect for short and medium range combat situations Compatible with ARI5s and picatinny mounts the Firefield lx Combat Sight handles recoil well and is waterproof and fogproof for maximum durability The Firefield lx Combat Sight features a durable aluminum die cast construction and multi coated lenses for a crisp clear image The Firefield Ix Combat Sight is a must have for any tactical shooter Protected by a manufactures warranty and the quality that comes with the Firefield name the Firefield x Combat Sight takes any shooter to the next level Firefield Victory Justifies Everything Technical Specifications Reticle type circle dot Operating temperature 20 to 140 F red green 133x66x75mm Reticle color Reticle brightness settings 5 Weight 12 4oz Magnificati oe Included Objective lens diameter 30mm alea new E Eye relief unlimited E Adjustment tool Field of view m 100m lens eloth Parallax free yds 2 Click value MOA Features 200 MOA CR2032 80 150 hrs V IPX6 weatherproof weaver and pictatinny Windage elevation range Aluminum die cast construction MOA adjustment Waterproof fogproof Quick target acquisition Battery type Battery life Battery voltage Waterproof standard Mount type
Download Pdf Manuals
Related Search