mains socket - KlikAanKlikUit
Contents
1. T7 USER S MANUAL version 1 1 AC 300 MAINS SOCKET SWITCH DIMMER AC 300 MAINS SOCKET SWITCH DIMMER Picture of the AYCT 102 A Indicator voltage and connection status not always included check the specifications on the B Search mode button packaging C Child protection AC 300 MAINS SOCKET SWITCH DIMMER 1 Insert the plug portion into a mains socket The 2 Connect the lamp or other suitable type of indicator remains lit as long as there is power at equipment to the switched socket the mains socket A This product is suitable for devices with a A The switched socket is normally off The power consumption of minimum 40 Watts and switched socket can only be switched on once it maximum 300 Watts has been linked to a transmitter Do not connect any devices that may not be dimmed AC 300 MAINS SOCKET SWITCH DIMMER 3 Briefly press the search mode button use a pen for example The indicator will begin to flash A The search mode will be active for 15 seconds If necessary repeat 3 to activate the search mode again 4 Send an on signal with the transmitter for example press the desired on off button of a remote control or wall switch or activate the motion detector The indicator on the mains socket switch stops flashing as soon as the connection has been made A See the manual for the concerned transmitter The pictured transmitter is not always included Check the specifica2. switched on off simultaneously Repeat 3 4 and press the group button on the transmitter during step 4 Attention the dimmer function does not work here The codes remain in the memory even during a power failure or when the mains socket switch is removed from the mains socket To delete the stored codes resetting the memory 1 Hold in the search mode button 2 The indicator begins flashing after approx 7 seconds 3 Release the search mode button 4 Briefly press the search mode button again 5 To confirm the switched socket switches on and off two times If the product does not work Reset the memory see previous line and set the code from the transmitter again repeat 3 4 Check whether the indicator is lit If not there may not be any power at the mains socket Make sure the connected device is switched on A Safety instructions e Wa rning Even if the product is switched off voltage may still be present at the switched socket Never use COCO products for life support systems or other applications in which equipment malfunctions can have life threatening consequences Do not connect any lights or other equipment that consume a total of less than 40 Watts or more than 300 Watts Connecting incorrect equipment can cause defects a short circuit and fire AC 300 MAINS SOCKET SWITCH DIMMER co a e Only connect equipment that is suitable for dimming e The dimmer switch is suitable for the connection o
3. device is used outside the EU check whether the device complies with the local directives This product complies with the essential requirements and other relevant provisions of the applicable European directives The Declaration of Conformity DoC is available at www coco technology com AC 300 MAINS SOCKET SWITCH DIMMER co ao hzi if possible submit this product for recycling after use Do not dispose of the product with household trash Warranty and copyright This device is covered by a 2 year warranty that begins on the day of purchase Visit www coco technology com warranty for additional information Reprinting of portions of this manual without permission from Pan Trade International B V is expressly prohibited AC 300 MAINS SOCKET SWITCH DIMMER pti PAN TRADE INTERNATIONAL B V P O BOX 126 4760 AC ZEVENBERGEN THE NETHERLANDS www coco technology com Declaration of Conformity Pan Trade International BV declares that the COCO product model type designation AC 300 MAINS SOCKET SWITCH DIMMER item number 74005 is in compliance with the essential requirements and other relevant provisions of directives R amp TTE 1999 5 EC EMC 2004 108 EC and LVD 2006 95 EC and is compatible with the standards EN 300 220 1 3 EN 55015 EN 301 489 1 3 and EN 60950 Manufacturer Authorised representative he M A Hoekstra managing director Zevenbergen 2008 01 30
4. f 12 Volt halogen lighting with an electronic transformer as long as the lighting is suitable for connection to a dimmer If the transformer hums this means that it is not suitable for use with this product If in doubt consult your lighting supplier or installer e Do not expose this product to excessive heat direct sunlight or moisture e Do not attempt to repair this product If the product is damaged or if you are in doubt about the proper operation take the product back to the place of purchase e Do not use the product in damp areas Clean the device with a clean cloth A Wireless e This product works using a radio signal that passes through walls windows and doors The range is maximum 75 metres in the open air The range indoors is strongly influenced by local conditions such as concrete glass and metals On average the indoor range is approximately 30 metres e New double glass often includes a thin metallic layer This type of glazing HR glass allows most visible light to pass through but has a negative impact on radio signals If there is HR glass between the transmitter and receiver you should expect a significant reduction of the range of the wireless signal e This product operates at a frequency of 433 92 MHZ It complies with the essential requirements and other conditions of R amp TTE Directive 1999 5 EC and can be used in all EU countries e There may be restrictions on the use of this device outside the EU If this
5. tions on the packaging AC 300 MAINS SOCKET SWITCH DIMMER 5 To confirm the switched socket switches on and off two times The code of the transmitter is stored in the memory of the mains socket switch and the product is ready for use A A maximum of 6 different transmitter codes can be stored simultaneously 6 Press the on button on the transmitter 3 times to dim the light 1 Press once The switched socket switches on 2 Press again The light intensity changes continuously 3 Press a third time as soon as the desired light intensity has been reached A When the dimmer is switched off it will remember the selected light intensity for the next time it is switched on AC 300 MAINS SOCKET SWITCH DIMMER co E Remarks A Reminders This product must be used in combination with at least one COCO transmitter This product is a dimmer receiver control lights or other suitable devices remotely without complicated wiring This product is equipped with child protection This may make it slightly more difficult to insert plugs If so push the plug firmly and directly into the switched socket To prevent interference avoid placing multiple products close to each other The minimum distance between units should be approx 50 cm The wireless system can be expanded indefinitely with other COCO remote controls and or receivers Your COCO transmitter may have a special group button with which multiple receivers can be
Download Pdf Manuals
Related Search