Instruction Manual - Test Equipment Depot
Contents
1. EDID CEC Selector 3 0 CHECKING PACKAGE CONTENTS Before attempting to use this unit please check the packaging and make certain the following items are contained in the shipping carton e 1x 1T EDID 11 EDID CEC Selector e 1x Power Adapter e 1x Operations Manual Note Please retain the original packing material should the need ever arise to return the unit If you find any items are missing contact your reseller or TV One immediately Have the Model and Serial Number and Invoice available for reference when you call 4 0 CONNECTING THE HARDWARE Please study the panel drawings below and become familiar with the signal input outputs power requirements inputs plus any controls present Note The resolution capability of the remotely located display devices must be capable of displaying the output of 1T EDID 11 Selector Before connecting the 1T EDID CEC Selector verify that the display device can support the selected resolution 4 2 1T EDID 11 EDID CEC Selector OVICTASK 4T EDID 11 EDID CEC SELECTOR POWER DCSV Deep udio Color Resolution CEC EDID Power O HDMI INPUT HDMI OUTPUT SYSRST ON i Tv c e OFF Connect the source device s output to the HDMI IN connector of the 1T EDID 11 using a high quality cable Connect an HDMI cable to the HDMI OUTPUT connector and then to the display device 7 Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com Lastly2. Systems 1 1 Liability Statement Every effort has been made to ensure that this product is free of errors TV One cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use It is the responsibility of the user of the hardware to check that it is suitable for his her requirements and that it is installed correctly All rights reserved No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical including photocopying recording or by any information storage or retrieval system without the written consent of the publisher TV One reserves the right to revise any of its hardware and software following its policy to modify and or improve its products where necessary or desirable This statement does not affect the legal rights of the user in any way All third party trademarks and copyrights are recognized The TV One logo TV One task and CORIO are the registered Trademarks of TV One All other trademarks are the property of their respective holders Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com 1 2 Features This 1T EDID 11 EDID CEC Selector has many features that enable it to perform ina superior manner Among these features you will find Compliant with HDMI v1 3 and DVI 1 0 standards Serial data rates of up to 2 25Gbps Supports 12 bit Deep Color Selectable DTV Resolutions
3. connect the AC adapter to the unit and observe that the Power LED is illuminated when you press the power button 5 0 OPERATING THE UNIT HDMI compatible display devices will eventually sort out the incoming resolution and signal type If capable of displaying the incoming signal they will do so after several seconds The purpose of the 1T EDID 11 is to allow you to speed up the process by pre selecting the appropriate signal The 1T EDID 11 s controls are used as follows e The Power button applies the output from the AC adapter to the unit s electronics e The Enter button is pressed after each selection is made via the other controls and the array of LEDs are status indicators showing the signal characteristics you have selected e The Audio button selects the embedded audio Bitstream from Dolby TrueHD DTS HD or LPCM 7 1 or LPCM 2 0 e The Deep Color Button selects either a 12 bit 10 bit or 8 bit data stream e The Resolution Button selects UXGA SXGA XGA 1080p 1080i or 720p Note that you must place the EDID selector switch in the SET position or the resolution set function will not be able to control its parameter When this function is used it will only control the resolution Frame rate vertical rate will not be affected e Switching the CEC switch to SYS RST causes the system to reset every 8 10 minutes forcing the display device to re sync If the switch is placed in the OFF position the 1T EDID 11 functionalit
4. of 720p 1080i p Selectable PC resolutions of XGA SXGA and UXGA Supports embedded audio including Dolby Digital True HD and DTS HD Built in CEC support with Compliant CEC PHY HDMI Range of up to 15 Meters 50 ft Locking 5VDC Connectors for enhanced mechanical security 2 0 SPECIFICATIONS Video Input HDMI amp DVI D Video Outputs HDMI Video Signal Processing Frequency Bandwidth Standards Supported HDMI DVI Video Formats Supported SD and HD Formats RGB Formats Supported DVI Equivalents Embedded Audio Support Dolby and LPCM Cable Distance Max Distance Environmental Operating Temperature Operating Humidity Storage Temperature Storage Humidity Warranty Limited Warranty Regulatory Approvals 3G Extender Unit Power Supply Mechanical H W D 1T EDID 11 HWD Weight 1T EDID 11 Power Requirement External Power Supply Accessories Included 1x Power Adapter 1x User Manual Model Numbers 1T EDID 11 1x via HDMI Connector Type A 1x via HDMI Connector Type A 2 25Gbps DVI via DVI to HDMI Cable Adapter 480i p 576i p 720p 1080i p VGA SVGA XGA SXGA and UXGA TrueHD DTS HD LPCM 7 1 LPCM 2 0 For 1080p 15m 50ft 0 to 40 C 432 to 104 F 20 to 90 Non condensing 10 to 60 C 14 to 140 F 20 to 90 Non condensing 3 Years Parts and Labor FCC CE RoHS UL CUL CE PSE GS RoHS 30x125x90mm 1 2x4 9x3 54 250g 0 55 Ibs 5 VDC 2A Locking DC US UK or Euro
5. Test Equipment 99 Washington Street Depot Melrose MA 02176 Phone 781 665 1400 1 800 517 8431 Toll Free 1 800 517 8431 Instruction Manual 1T EDID 11 EDID CEC Selector Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 Table of Contents Introduction Specifications Checking Package Contents Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information 1 0 INTRODUCTION Thanks for purchasing the 1T EDID 11 EDID CEC Selector product from TV One The 1T EDID 11 allows easy set up of the EDID and CEC parameters between a source and display monitor Instead of waiting for the source and display to synchronize this HDMI switcher saves time by using preset EDID and CEC settings to speed up the process It s also easy to change your settings should that become necessary due the selection of a different source or destination device or the purchase of new equipment Our professional video conversion products have been serving the industry for over twenty years TV One offers a full line of high quality Seamless Switchers Video Scalers Up Down Cross Converters Analog Digital Converters SD HD SDI HDMI DVI Format Converters Standards Converters TBC Frame Synchronizers Matrix Routing Switchers Signal Distribution Amplifiers and Cat 5 Transmission
6. incurred by the reseller end user or any third party 8 0 REGULATORY COMPLIANCE The 1T EDID 11 EDID CEC Selector has been tested for compliance with appropriate FCC and CE rules and regulations The Power Adaptor Supply has been tested for compliance with appropriate UL CUL CE PSE GS Rules Regulations and or Guidelines This Product and Power Adapter is ROHS Compliant 10 Test Equipment Depot 800 517 8431 99 Washington Street Melrose MA 02176 TestEquipmentDepot com
7. ld the dealer s technical personnel be unable to assist you contact TV One via our support website http tvone crmdesk com Create a technical support request on the site and our support team will respond within a short period of time 7 0 LIMITED WARRANTY TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase The warranty term for specific product lines is defined below 1 TV One branded products based on TV One s CORIO technology are warranted for a period of five years from the date of purchase This includes products with the model number prefix of C2 1T C2 CX A2 or S2 2 TV One task branded products other than those based on TV One s CORIO technology mentioned above are warranted for a period of three years from the date of purchase This includes products with the model number prefix of 1T with the exception of 1T C2 3 LCD Monitors are warranted for a period of three years from the date of purchase with the exception of the LCD panels integrated into the monitors that are supplied by third parties LCD panels are limited to the term and conditions of the warranty offered by the respective LCD panel manufacturer Such specific LCD panel warranties are available upon request to TV One Should a product in TV One s opinion prove defective within this warranty period TV One at its option wi
8. ll repair or replace this product without charge Any defective parts replaced become the property of TV One This warranty does not apply to those products which have been damaged due to accident unauthorized alterations improper repair modifications inadequate maintenance and care or use in any manner for which the product was not originally intended If repairs are necessary under this warranty policy the original purchaser must obtain a Return Authorization Number from TV One and return the product to a location designated by TV One freight prepaid After repairs are complete the product will be returned freight prepaid LIMITATIONS All products sold are as is and the above Limited Warranty is in lieu of all other warranties for this product expressed or implied and is strictly limited to two years from the date of purchase TV One assumes no liability to distributors resellers or end users or any third parties for any loss of use revenue or profit TV One makes no other representation of warranty as to fitness for the purpose or merchantability or otherwise in respect of any of the products sold The liability of TV One with respect to any defective products will be limited to the repair or replacement of such products In no event shall TV One be responsible or liable for any damage arising from the use of such defective products whether such damages be direct indirect consequential or otherwise and whether such damages are
9. y is defeated and the display device functions according to its design parameters Switching the CEC switch to ON will cause the 1T EDID 11 to function in response to your inputs Note that you must press the Enter button each time you change the position of the CEC switch e The EDID switch will allow you to control the way your source sees your display when it is in the SET position Placing the switch in the TV position allows the EDID information from your display to pass to your source normally Please note that when you connect a source to our 1T EDID 11 you need to check whether or not your source will auto detect the EDID once the EDID is changed Some devices such as the PS3 will not automatically detect that the EDID has changed and will need to be told to re check manually 6 0 TROUBLESHOOTING Other than faulty cables or attempting to use the product over too great a distance there are seldom problems with the 1T EDID 11 EDID CEC Selector product If there is no image present at the remote location connect the display device directly to the source to make certain that the problem is not in the display If an image is present under those circumstances make certain the unit is receiving power Next make certain your cables are defect free and securely attached to the cable at each end After trying the above suggestions should the problem still persist contact your dealer for additional suggestions before contacting TV One Shou
Download Pdf Manuals
Related Search