GeoSpotX GeoSpotter GC-101 / CT-58A
Contents
1. will be assigned to receive the data sent from the GC 101 Please note that question marks or any symbol is not allowed after URL The GeoSpotter will add the necessary symbol s on automatically username Password 4 Fixed IP or URL 1 GeoSpotX Advanced Location and Monitoring GPS Solutions 2 Example username 0000 4 http www myhostname net 1 3 Set up Auto Report Use this command to set up the frequency of an Auto Report If you send the SMS according to the example shown below to GC 101 you will have an Auto Report Message every 300 seconds for 99 messages Once the loop is done you can send a SMS message to update renew or switch it off Note You can limit the amount of the Auto Report messages by setting1 9998 the total number of the report field When you set 9999 the Auto Report Message will not stop unless you define a new Auto Report Setting username Password 6 intervals sec total number of reports Example username 0000 6 300 99 1 4 Set up voice monitor mode This function allows the user to select Overhearing or Dial Polling feature User can hear the voice from the surrounding if Overhearing is selected and receive an SMS containing GPS position in Dial Polling username Password 8 1 hidden microphone 2 Voice polling Example username0000 8 12. GeoSpotX Advanced Location and Monitoring GPS Solutions GeoSpotter GC 101 CT 58A Please read the GC 101 User Manual for complete reference Please read the CT58A User Manual for complete reference Basic settings First insert a SIM card with data connection enabled All the settings are done by SMS Please use your cellular phone to send the following SMS to the GeoSpotter for basic configuration General command format is username password function code command code parm1 param2 Every command starts with and ends with No spaces are allowed The default user and password are username and 0000 accordingly 1 1 Set up APN Access Point Name that is provided by your GSM provider For uploading the data to SpotXServer you must have a set of GPRS APN from your GSM network Various GSM networks provide different GPRS APN settings Please ask your GMS service provider about the APN settings If the username and password of an APN are indefinite or showed in blank just leave the parameters blank no space You can follow the Setup Format below to setup the APN that is provided by your GSM network username 0000 3 your APN user password Example username 0000 3 internet APN List 1 2 Set up a host name URL of the SpotXServer This command SMS instructs the GeoSpotter to access a URL or a fixed IP for data transmission If you send the SMS according to the example seen below to GC 101 the URL http www myhostname net
Download Pdf Manuals
Related Search