Digital Video Monitor
Contents
1. for two seconds 5 The pair icon will appear on the screen and the power LED on the camera will blink for a few seconds 6 Press the menu button Jon the monitor to confirm the setting 7 C1 OK will appear when the camera and monitor are paired successfully and then the video and audio will be transmitted Ea automatically Note If C1 X appears pair failed instead of C1 0K you will have to remove all sources of power from the camera and monitor and start the pairing process over again PROBLEM SOLUTION Equipment does not function Camera and or monitor are not switched on The battery is dead or defective The power adapters are not connected No reception Screen freezes or turns black Camera and monitor are not paired Camera is too far away from monitor The VOX sensitivity is set too low No signal Reception interference static The camera and monitor are too far apart The battery power is too low Other electronic devices are interfering with the signal The camera or monitor are placed near too many metal objects Feedback screeching static e The volume on the monitor is set too high Picture is black and white e Night vision LEDs are ON e Increase the amount of light in the room being monitored The rechargeable battery will not charge e The power adapters not connected e Battery pack is not plugged in inside the battery compartment Maintenance e Clean the su2. 12 CHARGING THE MONITOR AND RECHARGEABLE BATTERY 12 OPERATION te at 12 SWITCHING THE CAMERA ON OFF e 12 E 13 MONIJOH OPERATION ta 13 SWITCHING THE MONITOR stn dena ctu 13 14 ADJUSTING THE TEMPERATURE DISPLAY 2 0 14 4 14 14 ADJUSTING THE VOX SENSITIVITY 15 INTERCOM EA TURE O EE 15 eee 15 15 PPU IN acc a 16 TROUBLE SION Ge 17 BE HIN Sa if 18 FEE SIA EMMEN 19 SAFET 20 PRODUCT WARRANTY INFORMATION sessesssscsecssecsecseccnscuecssccuccuscssccuecsscsuecuscasecuecssesseessessenseessenseets 21 CearVu Digital Wireless Technology ClearVu technology ensures outstanding image and sound clarity so that you can watch and listen to your child up to 500ft away Feel free to move around the house and no matter where you go you will always see your baby With Levana you ll never miss a moment Large LCD for Superior Viewing Quality Imagine what you will catch your baby doing on this bright and clear large 3 5 LCD screen With an LCD of this size you will be able to set the monitor down and still see your baby clearly Temperature Monitoring to Ensure Safety Studies indicate that your baby s room should be between 61 68 F 16 20 This system is equipped with temperature monitoring so you ca
3. You have the ability to adjust the level of sound needed in order for your monitor to turn on Rechargeable Monitor Enjoy up to four hours of continuous audio and video monitoring with a fully charged unit LED Noise Level Indication Lights The monitor has LED lights on it that light up to display up to five different levels of sound This means you can turn the volume all the way down relax and still know when and how much noise your baby is making All in One Table Stand and Belt Clip The table stand also functions as a belt clip for ultra usability Place the monitor upright with the table stand when you are in the same room You can also carry the monitor with you and still have both hands available by using the belt clip Energy Efficient Power Adapter The power adapters save you on power all while saving the environment They are rated with a Level V efficiency standard which means they are 30 more energy efficient then other conventional power adapters Wall Mount on Baby Camera for the Best Viewing Angle The camera can be wall mounted so you can easily view your baby in its crib as well as see all other parts of the nursery 24 7 Lifetime Live Customer Support Our customer support team can be reached by phone 24 7 or by email and live web chat services so you always have access to an expert Disclaimers 1 Optimum range is 150ft when signal is passing through walls or floors Microwave ovens when in use may cause s
4. Without Night Vision With Night Vision Switching the Monitor ON OFF 1 Press and hold the power button L until you hear two beeps 2 The LEVANA logo will appear on the screen i 1 ri r for a moment followed by the picture being i transmitted FT 3 3 To turn off the unit press and hold the power button 65 again for 1 second Note The power LED will turn red when the rechargeable battery is low power Setting the Brightness 1 Press the menu button once 2 brightness icon will display the screen a along with the brightness gauge that will indicate jif the current set level m a 3 Use the up and down buttons to adjust the W Sy brightness level up and down Adjusting the Temperature Display The ideal temperature for a baby s room is between 16 20 Cor 61 68 F Please set or adjust the room temperature accordingly 1 Press the menu button twice 2 The temperature icon J will display on the screen along with the current status of the temperature function either Celcius Fahrenheit or OFF 3 Use the up and down buttons to turn the temperature function ON to switch between either Celcius or Fahrenheit or to turn the temperature function OFF Switching the Night Light ON OFF 1 Press the menu button three times 2 The night light icon CE will displav on the screen along with the cur
5. down One bar being the lowest sensitivity and five bars being the highest sensitivity Intercom Feature This video baby monitor is equipped with a 2 way audio intercom to enable you to talk to and soothe your baby back to sleep without going into the room 1 Press and hold the intercom button in the middle of the front of the monitor a 2 The intercom icon will appear on the monitor screen r and you will be able to speak and be heard through il A 5 8 the speaker in the camera 3 To stop talking release the intercom button Range When the distance between the camera and monitor is too great the screen will go black and the range icon will appear Ti if this happens you will have to move the units closer together Adjusting the volume 1 In normal monitor operation you can press the up and down AV buttons on the monitor to 4 adjust the volume of the noises you are hearing from baby s room The camera and monitor come paired connected together If you do receive this package and the devices do not automatically connect and transmit you may do so manually 1 Slide the power switch on the right hand Light Sensor side of the camera to the OFF position J 2 Cover the light sensor on the front of the camera with your finger ora cloth 3 Slide the power switch _ the camera to the ON position 4 With the monitor switched on press and hold the play pause button
6. USERI MANUAL Safe N See Advanced Digital Video Monitor www myLlevana com need helpr Please contact a Levana customer support representative regarding anv additional information on product features specifications or if vou need anv help with set up we are available 24 71 Please contact us via one of the methods below Email support mylevana com Online live web chat Visit www mylevana com Toll free telephone 1 866 946 7828 Toll free fax 1 888 771 1701 For more product information visit www mylevana com Note This is manual version 1 0 for this product you may find updated versions by visiting our website Congratulations on your purchase of the Levana TW502 Digital Video Baby Monitor This monitor uses advanced Clearvu digital technolog that will deliver a crystal clear view of your baby s room on the 3 5 LCD screen from anywhere in your home Feel free to relax and take comfort in knowing that your child is in good hands with Levana iib 0 JN JE 3 FEATURE E E cts 4 BUTTONS AND CONNECTIONS MONITOR 6 BUTTONS AND CONNECTIONS 8 CAMERA SETUP AND MOUNTING GUIDE assi 10 SETTING UE TOUR 11 BATTERY OPERATION 11 ATTACHING POWER THE CAMERA 11 INSTALLING THE RECHARGEABLE
7. ase contact us using any of the following methods Phone 1 866 946 7828 LEVANA Canada LEVANA USA Fax 1 888 771 1701 4080 Montrose Road 60 Industrial Parkway 264 Web www myLEVANA com Niagara Falls ON Cheektowaga NY 14227 Canada L2H 1J9 USA 14305 Warranty Terms 1 LEVANA products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials This warranty is limited to the repair replacement or refund of the purchase price at LEVANAS option This warranty becomes void if the product shows evidence of having been misused mishandled or tampered with contrary to the applicable instruction manual Routine cleaning normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty expressed or implied is provided LEVANA assumes no responsibilities for any other claims not specifically mentioned in this warranty This warranty does not cover the shipping cost insurance or any other incidental charges You MUST call LEVANA before sending any product back for repair You will be sent a Return Authorization form with return instructions When returning the product for warranty service please pack it carefully in the original box with all supplied accessories enclose your original receipt or copy and a brief explanation of the probl
8. ce received including interference that may cause undesired operation Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator and your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This device and its antenna must not be co located or operating in conjunction with any other antenna or transmitter This device and its antenna must not be co located or operated in conjunction with any other antenna or transmitter IC STATEMENT Operation of this device is subject to the following two conditions 1 Thisdevice may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of the device The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user s authority to operate the equipment Read and Keep Instructions All the safety and operating instructions should be read before the vi
9. deo baby monitor is operated Water and Moisture This product is designed for indoor use only The unit should not be exposed to rain moisture dripping or splashing No objects filled with liquid should be placed on top of or beside the product such as a glass or vase This item should not be used near water Non Use Periods Always unplug the AC adapters from the wall outlets during long periods of non use Ventilation This baby monitor should not be used on a bed sofa rug or similar surface that may block the ventilation openings or be placed in an enclosed area such as a bookcase or drawer that may impede air flow Keep Away from Sources of Heat This unit should not be exposed to direct heat sources such as a candle fireplace radiator heat register stove or other appliance that emits heat The unit should not be left in direct sunlight Power Source This unit should only be used with the AC power adapters included in this package rated 6V 800mA Damage Requiring Service This unit should be serviced by qualified personnel only when a Objects have fallen or liquid has been spilled into the product b The units have been exposed to rain The units do not appear to operate normally or exhibits a distinct change in performance d The units have been dropped or the enclosure damaged Caution This product cannot replace responsible adult supervision of a child You should personally check your child s activity at regular
10. em include RA This warranty is valid only in Canada and the continental U S This warranty cannot be re issued please Visit www myLevana com for warranty ineormation product support contact ineormation user manual powntoads much more
11. ignal disruption at close range Buildings with metal frames may also cause signal disruption Maximum transmission range is 500ft 2 Night vision range up to 10ft under ideal conditions Objects at or beyond this range may be partially or completely obscured depending on the camera application 3 Battery life of 4 hours based on full duration testing Battery life may vary depending on usage 4 Product may not be exactly as shown on the package Some images are used for illustration purposes only Notes e Levana does not endorse any of its products for illegal activities Levana is not responsible or liable any way for any damage vandalism theft or any other action that may occur while a Levana product is in use by the purchaser For safety reasons baby monitors with power cords should never be hung on or near the crib Power cords should be kept at least 3 feet away from the crib and baby s reach at all times UNS AND CU NIN JNS MONITOR JNS AND CONN 10 11 12 13 14 15 Antenna Transmits and receives signals Rechargeable Battery Compartment Insert the rechargeable battery here Belt Clip and Support Stand Flip up to use as a belt clip or down to use as a support stand Speaker ON OFF Button Turns the unit ON and OFF Talk Button Enables you to speak through the camera intercom Menu Button Brings up the menu options Power LED Indicates the amount of battery left green mean
12. intervals STATEMENT ON REGULATION These units are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Operation with non approved equipment or unshielded cables is likely to result in interference to radio or TV reception The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user s authority to operate this equipment We take quality very seriously This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials If you have warranty or support issues ple
13. l clips to secure the power cord away from the crib or baby s reach For more information please visit our website www mylevana com safety JUR Battery Operation The camera unit can be powered using 4 AAA batteries instead of the included AC 1 Remove the battery compartment cover on the bottom of the camera base using a small phillips cross head screwdriver 2 Place 4 AAA batteries not included in the compartment paying attention to the labelled polarity markings 3 Replace the battery compartment cover using the small screwdriver Note The power LED will flash when the battery charge is low Remove Screw Using Small Philips Head Screwdriver 4 Attaching Power to the Camera 1 Connect the small end of the power adapter into the DC Jack on the back of the camera 2 Connect the other end of the adapter into an available wall outlet Installing the Rechargeable Battery 1 Turn the belt clip on the back of the monitor unit upwards 2 Remove the battery compartment cover using a flat edge screwdriver to twist the battery compartment latch to the open position 3 Insert the included rechargeable battery ensuring that the copper connections on the battery line up with the copper connections on the inside of the battery compartment 4 Replace the battery compartment cover and use a flat edge screwdriver to tighten the Copper Connections latch to the locked position Charging the M
14. n monitor the temperature in your baby s room and know they are always comfortable Talk to Baby Intercom Soothe your baby from a distance with the talk to baby intercom With the simple press of a button you can let your baby know you are on your way to their nursery or simply talk to them until they fall back to sleep without having to go into his or her room Five Soothing Lullabies Choose from five different lullabies to soothe your baby to sleep Turn lullabies on and off as well as change the song being played all from the parent unit with the simple push of a button Choose from Rock a Bye Baby Hush Little Baby Itsy Bitsy Spider Sleep Baby Sleep and Twinkle Twinkle Night Vision The built in night vision allows you to see your child even in complete darkness up to 10ft away When the lights go down the system automatically adjusts to the level of light The camera can be placed anywhere in your child s room while still displaying a precise image of your baby Relaxing Nightlight The baby unit has a gentle nightlight that you are able to turn on and off from the parent unit Turn the light on if your baby is getting restless to calm them and turn it off when your baby is asleep all without going into the baby s room Voice Activated Control Conserve battery power and sleep well at night with VOX activation VOX allows you to turn off the monitor while your child is safe and sound It will only turn on when they make noise
15. onitor and Rechargeable Battery 1 To charge the battery in the monitor unit plug the included power adapter into the power input jack on the right side of the monitor 2 The power LED will light up red to indicate that the battery is being charged 3 For safety reasons use ONLY the adapters included in the package Note When the battery in the monitor is low battery the power LED will turn red when the power plug has been inserted the power LED will turn green to show it is charging Switching the Camera ON OFF Position the camera to view the area you wish to monitor angle the camera lens for best view by turning it up or down 1 Slide the power switch 1 the ON position 2 Power LED on the front of the camera will light up green The camera is now ready to operate 3 To turn OFF the camera flip the power switch back to the OFF position Note If you are using batteries to power the camera unit and it does not start up when the power switch is in the ON position you may need to replace the batteries The Power LED will flash slowly when the batteries are low power Night Vision The camera is equipped with four IR infrared LEDs These LEDs located on the front of the camera allow you to see up to ten feet in complete darkness Allowing you to check your baby at any time of night The night vision LEDs will activate automatically when the camera detects that the light levels are too low
16. ords being placed too close to crib play area or other baby sleep environment Power cords should NEVER be placed within 3 feet of a crib or within baby s reach Using Levana s Camera Setup and Mounting Guide you can monitor your baby while they sleep safely in their crib To Mount on a Tabletop Safely Figure A 1 Place the camera on a tabletop at least 3 feet away from your baby s crib 2 Feed the power cord down the back of the table or use wall clips to secure the cord away so baby cannot reach 3 Plugin the power cord check to ensure that you can see your child and there are no viewing obstructions To Mount on a Wall Safely Figure B C Before drilling a hole it is important to check the reception and camera positioning in the place that you intend on hanging it to the wall Ensure you are hanging the camera at least 3 feet away from baby s crib 1 2 3 A 5 6 8 Pre drill a hole in the wall using a 3 16 4 8mm drill bit Insert a wall anchor into the wall and tap gently with a hammer until the anchor is flush with the wall Insert a screw into the wall anchor and tighten until the screw only sticks out about 1 2 inch Plug the power cord into the power jack of the camera Locate the wall mounting hole on the bottom of the camera Slide the hole over the screw sticking out of the wall Figure C Check to see that the monitor is secure if it is loose you may have to tighten the screw more Use wal
17. rent status of the function either ON or OFF 3 Use the up and down buttons AW to turn the night light of the camera ON or OFF Selecting a Lullaby 1 Press the play pause button ll on the right hand side of the monitor once 2 The lullaby icon fi will appear on the monitor screen and the last plaved lullabv will start to plav 5 3 Press the lullaby button 71 on the right side of the monitor to select one of five lullabies to play aa 4 Press the up and down volume buttons ay during playback to adjust the volume of the music MUN Adjusting the VOX Sensitivity VOX Voice Operated Transmission Sound Detection The VOX function allows the camera to transmit video and audio immediately after a sound is heard Once transmission begins the video will play for 10 seconds if no more noise is heard Pressing a button on the monitor will also turn the screen and transmission ON at any time Setting the sensitivity of the VOX function will affect how easily the video will be transmitted one bar will require much louder sounds being detected before transmission will begin than the five bar setting requires 1 Press the menu button four times 2 The VOX icon WITH will display on the screen along with the current status of the function either OFF or a gauge indicating the current sensitivity 1 5 3 Use the up and down buttons a to turn the VOX function OFF or adjust the sensitivity up and
18. rfaces of the camera and monitor with a soft fluff free cloth e Ifthe units become dirty use a lightly damp cloth to wipe surfaces taking care to not allow water into any openings e Never use cleaning agents or solvents Camera Specifications 100 240 50 60 Hz 200mA 6 VDC 800mA IR LEDs and 4 LEDs 10 foot range 0 EA 500 Feet Maximum Frequency Range 07 2 4 GHz Operable Temperature 32 Fto 104 F 0 Cto 40 C Transmission Power ssesensazensanenzanzanesenzanenzanennenenzananzanenzananzansaz 15 17 dBm Monitor Specifications 100 240 VAC 50 60 Hz 200 mA Output POW ei 6VDC 800mA Operable Temperature 32 Fto 104 F 0 Cto 40 C DOLCE l A 3 5 Initial Charging 3 Hours Battery Power TIME ssesenzzzensazenzaneanznnsenenzenenzensanenzanensnzonsanensena 4 Hours This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 Thisdevice must accept any interferen
19. s the battery is charged red means the battery power is low VOX LED green when VOX is enabled Volume Level LEDs Indicates the amount of sound being heard by the camera Microphone Press the talk button and speak into the microphone to talk to your baby Volume Buttons Increases decreases the volume through the speakers adjust settings in the menu Play Pause Plays or pauses the lullaby playing through the camera Lullaby Selector Selects the lullaby that the camera will play LCD Screen Displays video of your baby JNS AND CUNN JNS AND CUNN JN Antenna Transmits and receives signals Night Vision IR LEDs Allows you to see up to 10 feet in complete darkness Camera Lens Point at what you would like to view on the monitor Microphone Captures all sounds in the baby s room Night Light Soothe baby to sleep with the built in night light 10 CDS Light Sensor Detects the absence of light and turns on night vision Power LED Indicates that the camera is powered on Power Input Plug the included adapter into this jack Temperature Sensor Reads the temperature and displays it on the monitor Battery Compartment Remove screw to install 4 AAA batteries not included for a completely wireless system AMERA 2 AND MQUNIIN This is a safety notice that is aimed at educating parents and caregivers of the potential safety hazards associated with power c
Download Pdf Manuals
Related Search