QQ2 Plus Series
Contents
1. Vala eile INFINUVO CleanMate CleanMate QQ Plus Series Robotic Vacuum Cleaner USER MANUAL QQ2 Plus Series Robotic Vacuum Cleaner Table of Content Safety Precautions Safety Instructions Special Features Cautions Main Unit and Accessories Main Unit Features Remote Control Functions Battery Installation and Removal Sonic Wall Setup Self Charging Home Base Scheduler Operations Installing Accessories General Operation Cleaning and Maintenance Useful Tips Specification Troubleshooting Warranty Policy 10 11 14 16 I7 21 23 24 29 Safety Precautions QQ Plus Series Before using this product please read the following safety instructions and keep this operation manual for future reference Please follow all normal safety precautions to avoid the occurrence of situations such as fire short circuit and injury Please make sure that you observe all the following safety precautions Safety Instruction QQ2 Plus Series Read this user manual thoroughly before using this product 2 This product is not for use outdoors 3 This product is an electronic device Never get it wet or let it come in contact with water Do not use itin a moist or wet environment 4 Before using this product please tidy up things on the floor You must remove all objects that could get caught in the rolling brush or in the air intake on the bottom of the unit Examples includ2. and even has a compartment for adding fragrance to the air as it cleans All ofthese features make this unit perfect for cleaning a wide variety of floor types including ceramic tile hardwood vinyl and most carpets As long as you have the CleanMate QQ2 Plus Intelligent Automatic Vacuum Cleaner you have the most helpful house cleaning mate The compact shape enables this unit to clean under beds tables and other furniture that standard upright vacuums cannot get to Once the CleanMate isturnedon it willfollow a five step repetitive movement Special bounce Spiral Along Wall S shape and Polygonal Spiral This wide variety of movement helps to ensure that the unit completely cleans a room el Y G 9 y Special Bounce Spiral Along Wall Spiral S Shape Spiral Polygonal Spiral Spiral MODE button on the remote control allows you to select a specific cleaning pattern forthe QQ2 Plus By default the unit operates in Automatic Mode switching between all 5 patterns but by using the MODE button on the remote you can select a specific pattern in the following sequence F1 Spiral F2 Special Bounce F3 Along Wall F4 S Shape F5 Polygonal Spiral and back to FA Automatic Tips When used FI Spiral mode cleaner will stop when it comes in contact with any objects It is prevented cleaner can not move away in same location sensors will tell the cleaner to back up turn and clean around the object when cleaner com
3. not included Sonic Wall included for QQ2 Plus I model onl lt QQ2 Plus Series QQ2 Plus Series Main Unit Features Bumper Sonic Wall Sensor Control Panel for QQ2 Plus Il only N Time Set Button Start Stop Button lt Remote Control as Remote Control Sensor Power Switch Dust Bin Dust Bin Release oide LU A RASA Battery Charging id Socket Ultraviolet Light Auxiliary Wheel Rolling Brush Battery Cover Vacuum Entry wit E Side Brush Drive Wheel Auto Charging connecting point Main Unit Features QQ Plus Series 1 Turn on the power button the power blue LED will light up 2 Press the Time Set Button to set the length of operation time The numerical panel will display the operation time When power is first turned on the default setting is 40 minutes The setting parameters are from 10 to 80 minutes in 10 minute increments 3 Try to set the operation time by the size of the area to be cleaned in order to prevent overuse of the battery and shortening its lifespan 4 When the battery is low the Low Battery light will blink red 5 In the following situations the error light will light up over charging battery overloaded motor and no traction for more than three consecutive seconds Error Indicator Operational Time amp Vacuum Motor MODE Display tart Stop Button Off Indicator Power On Off Ultraviolet On In
4. B Pick up hide all cords that could get tangled in the unit C Move all items that could be easily knocked over D Roll under loose edges of rugs with any type of stringy fringe 3 DO NOT use the QQ2 Plus on plush or long pile carpet or rugs 4 When using the CleanMate ina room for the first time watch how it operates in the room Watch for areas that the unit has troubles operating in and either block these areas of the room or move objects around so that the unit can clean effectively and not get stuck or hung up before it is able to clean the entire room Starting Operation 1 Clean out the dust bin before use 2 Placethe QQ2 Plus onthe floor in a relatively open space near the middle of the room to be cleaned 3 Press the power button on the main unit to turn it on 4 Set the timer of the unit to the desired cleaning time by pressing the Timer button on the remote control For Reference Use 10 minutes of cleaning time for Every 5 7M 54 72ft of floor space Cleaning time may vary depending on the type of floor being cleaned 5 Press the Start button on the control panel or the remote control After a short delay the QQ2 Plus will begin to automatically clean the floor 6 Atthe end ofthe cleaning cycle the QQ2 Plus will emit a long beep and will turn off the vacuum moto and start to search for docking station Ifthe low battery light on the unit 1s blinking then the battery 1s low and QQ2 Plus needs to be recharged before it can
5. D D Q on O E gt O gt 23 QQ2 Plus Series Troubleshooting This trouble shooting guides cover some CleanMate problems that you might have If problem persists please contact your local warranty provider or www infinuvo com for further assistance The repairs that marked needs to be done by qualified service personal Problem Symptoms Possible Cause Things to do Batt tallati b Make sure battery has good contact with charging Both ERROR amp LOW BATT Battery installation problem stripes and battery lifting band faces up indicators are on Charge battery manually for 2 days see Page 10 Battery malfunction or replace bat t CleanMate is lifted off ground over 3 seconds while running Put the CleanMate back on to the ground Remove deris amp hairs from brushes and wheels ERROR indicator on CleanMate is stuck LOW BATT indicator on Battery power is low Recharge the CleanMate battery Can not power onthe home Malfunction charging base charging base Home base LCD display malfunction scheduler version Malfunction LCD display on home base Replace the LCD on charging base only charging base Replace the charging base Can not dock on the home Malfunction front bumper sensor Clean or replace front bumper sensor Malfunction control board Replace control board Remove debris amp hairs from roller brush Replace Too much debris amp hairs on brush the roller brush if necessory Mal
6. on the Air Filter Illustration 4 6 Empty the contents of the Dust Bin intoatrash can Illustration 5 You may rinse out the Dust Bin with water if you need to Illustration 6 Allow the Dust Bin to completely dry before using it again 7 Using the Hand Brush that 1s provided with the unit brush off the dirt and debris on Air Filter intoa trash can Illustration 7 The Air Filter can be rinsed with water Make sure the Air Filter is completely dry before using it again 8 DO NOT clean the Dust Bin or the Air Filter in a Cloth Washing Machine or a Dish Washing Machine QQ2 Plus Series Cleaning and Maintenance 9 While the Dust Bin is removed from its compartment turn the unit over and using the Hand Brush provided with the unit brush away any excess dust that might have accumulated in the compartment into a trash can 10 Once the Dust Bin and Air filter are completely dry put the Air Filter back in place on the Dust Bin Illustration 8 Then put the assembled Dust Bin back into the Dust Bin compartment with the air filter pointed away from the control panel 11 Put the Dust Bin Cover back in place by first inserting the tabs on the cover into the slots on the case of the unit then press down firmly on the ridges of the Dust Bin Cover until the Release Button clicks into place Illustration 10 Make sure the Dust Bin Cover is securely in place before operating the unit Illustration 1 Illustration 2 Illustration 4 Illustratio
7. user sees it blinking to confirm If user want to skip a day wait for more than 5 seconds without pressing Wk key and it will start display the next week day for user to choose 2 4 When cleaning schedule set up is complete press SET again and the scheduler will return to the Clock display Mode Example 1 LCD display with brush icon Scheduler is set up to perform a preset cleaning 1ob and current time is Monday 8 10AM Mo VIDC Vi LL UL Example 2 LCD display with no brush ion Scheduler has NOT been set up to do any preset cleaning job andcurrent time is Monday 8 10AM Mo d l NEZ P iLI Vi A 3 How to Delete a Preset Cleaning Schedule When scheduler displays clock time at Clock Display Mode press SET once and it will enter Clock setting Mode Press SET again it will enter Scheduler Mode When user set hours and minutes the cleaning will be deleted if user select the bar sign as shown below instead of a numeric digit Em X9 hu DW du Fr ES ANA 4 How to Display a Preset Cleaning Schedule When scheduler displays clock time atClock display Mode press SET once it will enter Clock setting Mode Press SET again it enters Scheduler Mode and it 13 Scheduler Operations 5 Start Cleaning Automatically Right After Battery is Fully Charged Press GO for about second on the self charging base and you will see Battery Brush and GO icons turned on as shown below on the left s
8. This warranty is only valid if the product has been properly installed and is used in the way of which itis intended and has received only factory authorized repairs servicing or alterations Under warranty batteries that meet these conditions and that function improperly will be repaired or replaced at the discretion of Infinuvo These warranties contain the sole express warranty of Infunuvo which makes no other warranties expressed or implied These warranties are made in lieu of any implied warranties of merchantability or fitness for a particular purpose These warranties give you specific legal rights You may also have other rights which vary from state to state WHEN YOU RETURN A CLEANMATE PRODUCT OR BATTERY UNDER THIS WARRANTY you must first obtain an RMA number by calling your local customer service center or www infinuvo com Infinuvo reserves the right to request that you submit a letter describing the circumstances under which the problem occurred and that you submit invoice and any other supporting evidence and documentation 2
9. an schedule the QQ2 Plus unit to clean on any day of the week up to 7 days per week one cleaning time per day and same cleaning time on each day 2 3 Press SET again to enter Scheduler Mode Time and week will start blinking Press Hr Min or Wk to set the cleaning schedule The display value will increase by I with each press and the number will change rapidly if user hold the button When user set hours and minutes the cleaning time will not be scheduled if user select the bar sign as shown below instead of a numeric digit gg SS S um WS un na ES After cleaning time 1s set you can choose to schedule the cleaning time on any day in a week The initial default setting is to clean on everyday Press Wk then the scheduler will highlight all 7 days of the week which means the QQ2 Plus will start automatic cleaning once a day 7 days a week at same cleaning time 12 Scheduler Operations QQ2 Plus Series If user wants to choose a particular day or days in a week to perform the cleaning job then press Wk again User will see Su start blinking Press Wk one more time within 5 seconds if user wants to select Sunday and user will see Su turns into steady state to confirm user setting If user wants to select a day other than Sunday just wait for more than 5 seconds and user will see Mo or other days of the week To select aparticular cleaning day just press Wk within 5 seconds after
10. ation and Removal Ensure that the power switch of the unit is set to the Off position and turn the unit over on its top with the back of the unit facing you Align the slotted end of the rolling brush with the slot in the flexible insert in the right side of the rolling brush compartment near the side brush and press it into place Press the free end of the rolling brush down into the rolling brush compartment and align the free end with the plastic insert on the left side ofthe compartment Slide the rolling brush to the left to secure it in place Fragrance Installation and Removal This Intelligent Automatic Vacuum has a compartment built into it for adding fragrance to the air as the unit cleans Any solid scent packet insert or dryer sheet can be used DO NOT use any type of Liquid or Oil Fragrance with this unit Press the Dust Bin Release Button to release the dust bin cover See the arrow in Illustration 1 2 Remove the dust bin cover as shown in Illustration 2 3 Remove the dust bin from its compartment as shown in Illustration 3 4 Place the fragrance pack into the compartment as shown in Illustration 4 Illustration 1 Illustration 2 Illustration 3 Illustration 4 15 General Operation QQ Plus Series 1 Make sure you have completely charged the battery before using it for the first time 2 Room preparation A Pick up all large items off of the floor that could get stuck in the brushes or the vacuum intake
11. be used again Stopping Operation 1 Press the Start or Power button on the control panel of the unit 2 Press the Stop button on the remote control 16 Cleaning and Maintenance QQ2 Plus Series Cleaning and Maintenance The operation and maintenance of the QQ2 Plus is very simple but to achieve good performance of the unit it is recommended that you follow a routine cleaning and maintenance schedule 1 Make sure to clean out the Dust Bin and to brush off the Air Filter after every cleaning cycle 2 Make sure that the vacuum intake 1s free of any obstructions 3 Check to make sure that the bristles of the Side Brush are free and not tangled 4 Make sure that there is not a lot of hair string etc caught up in the Rolling Brush or the wheels 5 Remove and clean out the Rolling Brush 6 Make sure that there 1s nothing block the air ventilation slots on the top of the unit Cleaning Dust Bin and Air Filter 1 Make sure the power to the unit is Off 2 Press the Dust Bin Open Button Illustration 1 3 Remove the Dust Bin Cover Illustration 2 4 Remove the Dust Bin from its compartment by placing your finger s in the groove near the front of QQ2 Plus andon the tab at the center ofthe air filter Squeeze to disengage the tab and then lift the Dust Bin straight out of its compartment Illustration 3 5 Remove the Air Filter from the Dust Bin by firmly holding the Dust Bin in one hand and pulling the Air Filter straight out by the tabs
12. dicator Power On amp Charging l Low Battery Indicator Indicator LED and Audible Indicator Audible Indication Ti hen the cleanning ti i Long Beep once followed by one Brief Beep Lae UM Na cis ERE UMEN Battery Low cleanning function off Fully charged and start vacuuming again when the docking station is set that after Brief Beep three times and One long Beep fully charged QQ 2 Plus will go out to m LED Indication Color of LED Lights Description Green Steady Vacuum Function off Blinking Battery Low Red Steady Error Steady Fully Charged Power On oe Blinking Charging Yellow UV On 6 Remote Control Function QQ2 Plus Series Forward Right Left Reverse Start l Stop Timer Button Mode Ultraviolet Light On Off Power Off Home Vacuum Motor On Off Function of each Button 1 Start Button Press the Start Button to begin the automatic cleaning of the room 2 Stop Button Press the Stop Button to stop the activity of the unit and it will emit a long sound 3 Timer button Use this button to set the cleaning time of the QQ2 Plus 4 Directional Buttons Forward when press forward QQ2 Plus will moving until user press forward button again or stop by obstacle Right left and backward button use these buttons to manually drive the unit to the right left and backward 5 Mode Button Press this button to pick a specific cleaning pattern for the QQ P
13. e clothing power cords cable telephone cords drapes of blinds loose fringes of rugs These items can get caught in the unit and either prevent it from moving or the unit could pull over a lamp table or chair for examples and cause damage to the unit floor object or person 5 Please do not sit or stand on this product Pay special attention to toddlers or pets in the house to prevent harm to the unit or the child pet or the unit 6 Please do not use this product to clean a still burning cigarette a lit match 7 Please do not use this product to clean flammable or highly volatile liquids such as gasoline or white gasoline 8 To prevent damage to the vacuum make sure that nothing 1s obstructing the air vents on the top of the unit 9 When was not in use for long period please charging battery minimum one time during 2 months 10 Use the factory provided batteries and charger If battery was over lifespan please renew same type and rating of battery Please ask your distributor 11 When your hands are moist do not touch the battery charger plug or power cord 12 When you need to clean this product stop charging and remove the Battery sy Special Features QQ2 Plus Series This product is a groundbreaking revolutionary automatic vacuum cleaner It utilizes high vacuum suction a rolling brush on the bottom a side brush for cleaning along walls and other objects an ultraviolet light to help with disinfection
14. e Timer display will show A for one minute 7 Vacuum Motor Off Button Press this button to control the On Off of the vacuum motor 8 Home Button Use this Button to make QQ2 Plus go back to the charging base 9 Power Off Button to power Off QQ2 Plus manually by pressing power Off Button Sonic Transmitter Charging Socket Receiver module Battery Installation and Removal QQ2 Plus Series Receiver moc 1 Use two hand fingers to depress the tabs at the front of the battery cover adodo E Lift up the battery cover by these tabs as shown in Illustration 1 2 Make sure the battery is inserted in the correct orientation by aligning the silver strips on the Battery with the metal tabs on the inside of the battery compartment See Illustration 2 Instructions 1 This CleanMate Sonic Wall is powered by 2 AA batteries Make sure to install the included AA rechargeable batteries in correct polarity 3 Close the battery cover by first inserting the tabs into the slots at the 2 To turn on the Sonic Wall slide the power switch to position 1 back of the unit and then pressing down on the front side of the battery 3 For best effect put the Sonic Wall on the other side of the door see picture cover until the plastic tabs click in place Please see Illustration 3 below when you want to confine it in certain area The CleanMate unit will detect the ultrasonic barrier from the Sonic Wall and no
15. es in contact with a wall or other obstacle Special Features 6 The QQ2 Plus is equipped with a light sensor When the battery is low Cautions QQ2 Plus Series or the cleaning time is completed the unit will automatically search for the docking station to recharge If QQ2 Plus cannot find the docking station in 30 minutes QQ2 Plus will stop and turn into sleep mode automatically which 1s to prevent battery run out There is a transparent window on top of the dust bin This allows you to easily see how full the dust binis so you can clean it out when it is needed This window also serves as a holder for the remote control to help prevent misplacing or losing the remote control Photo sensors on the underside of the front of the unit detect stairs and other drop offs to keep it from falling off the edge and damaging the unit A handle 1s built in to the unit to make it easy to pick up and move the unit to a different room QQ2 Plus Series Do not look directly at the UV light V Do not attempt to remove or replace the UV light This light isa Jt permanent fixture and cannot be replaced Do not touch the UV light es bulb with bare hands Natural skin oils will cause premature failure Make sure the battery 1s installed correctly Main Unit and Accessories QQ Plus Series Main 1 1 Unit 1 Remote control Charger L3 1 6 jJUsermanad 1 8 Self charging base 1 9 Fragrance
16. function brush motor Replace brush motor 1 T Remove debris amp hairs from side brush Replace Side brush stuck bdo dida deb db the side brush if necessory Malfunction brush motor Replace brush motor Remote control battery bad Replace the button battery in the remote control Remote control does not work Remote control Remote control defective Remote control defective Replace the remote control 24 Main roller brush stuck QQ2 Plus Series Please fill in your warranty card completely and submit it to your local customer service center Infinuvo provides you as the owner of this Infinuvo product with the following Limited Warranty Policy Warranty Policy One year Product Warranty Infinuvo warrants to the original purchaser of this Infinuvo product that the product is free from defects in original materials and workmanship for a period of up to one year from the date of initial purchase This warranty 1s only valid if the product has been properly installed and is used in the way for which it is intended and has received only factory authorized repairs servicing or alterations Under warranty products that meet these conditions and that function improperly will be repaired or replaced at the discretion of Infinuvo Six months Battery Warranty Infinuvo warrants to the original purchaser of this Infinuvo product that the original batteries contained within this product will function fora period of six months
17. ide of LCD panel This indicates that the QQ2 Plus vacuum will automatically start a cleaning cycle right after the battery is fully charged QQ2 Plus Series Mo sol ES Vi Sc LJ Lg UL Press the GO button again to turn this function off Note QQ2 Plus vacuum cleaner will only run one cleaning cycle after GO button is selected 6 How to Start Cleaning Right Away If you hold down GO button for 5 seconds the QQ2 Plus on the self charging base will leave the base and begin the cleaning right away no matter whether the battery has been charged in full or not This function works the same way as you push START button on the remote control on Section 7 7 How to Start Cleaning with Remote Control When the QQ2 Plus is being charging on the self charging base you can direct the QQ2 Plus to begin cleaning when you press START button on your remote control Installing Accessories QQ2 Plus Series B Side brush Installation and Removal To remove the Side brush use a Philips head screwdriver to remove the screw E in the center of the Side brush by turning it counter clockwise To install the Side brush place the Philips head screw through the center hole of the Side brush and align the screw with the hole in the slot for the Side brush Attach the screw by turning it in a clockwise direction until the screw is firmly in place Installing Accessories QQ Plus Series Rolling Brush Install
18. left side of LCD panel sign is displayed when user set clock or cleaning schedule Week display top of LCD panel Each wseek day display will be shown as Su Mo Tu We Th Fr and Sa CLK Right side of LCD panel is displayed in Clock setting mode GO Left side of LCD panel Battery and Brush icon on the left panel show that the cleaning will start once the battery 1s fully charged Brush Icon on the right side of LCD panel 1s displayed when scheduled cleaning time has been set up and it 1s ready to start cleaning based on preset schedule Clock digit display is in middle of LCD panel 11 Scheduler Operations QQ2 Plus Series 2 Scheduler Setting Operations Setting the Clock 2 1 Once powered on the scheduler will enter Clock Display Mode and display initial default setting of Sunday 00 00 1n 24 hours time format FVir rltd LLLI LI 2 2Press SET to set up the clock time enter Clock setting mode and display SET and CLK icon Time and week will start blinking Press Hr Min or Wk to set the correct time and week day The display value will increase by 1 with each press and the number will change rapidly if you hold the button The clock will be set and display will become steady SET and CLK disappear if there is no key input for one minute idling or no action E LENS VAS LEES VAS Setting the Cleaning Schedule User c
19. lus By default the unit cleans in Automatic Mode All 5 cleaning movements E Press the Mode button once to make the unit clean in Spiral mode only The timer will display 1 for one minute and then will show the cleaning time When the QQ2 Plus comes in contact with any object while running in this mode it will automatically stop its movement B Press the Mode button again Twice to make the QQ2 Plus clean in Special Bounce mode only The Timer will display 2 for one minute Press the Mode button again Three times to make the unit run in Along Wall mode only The Timer will display 3 for one minute B Pressthe Mode button again Four times to make the unit run in S Shape mode only The timer will display 4 for one minute B Press the Mode button again 5 times to make the unit run in Polygonal Spiral mode only The Timer display will show 5 for one minute Sonic Wall Setup QQ Plus II The Sonic Wall only works with CleanMates that have the Sonic Wall Sensor on their bumper refer to diagram on page 5 It will create an invisible barrier that the CleanMate will not cross This way users can easily confine the CleanMate to one room or certain area to improve cleanin 6 UV Button Allows you to turn On and Off the ultraviolet light as needed efficiency j B Remote Control Function QQ2 Plus Series B Pressthe Mode button again 6 times to return to Automatic mode all 5 cleaning patterns Th
20. n 5 18 Cleaning and Maintenance QQ2 Plus Series Illustration 7 a ex Illustration 6 Illustration 9 filustration 10 Cleaning the QQ2 Plus Over time dust and dirt can accumulate in different areas of the unit DO NOT use Water to clean the unit This is an electrical unit and if any of the electric components get wet the unit will no longer work and could cause a short circuit and potentially harm someone Use Canned Air the Hand Brush provided with the unit or a dry cloth to wipe away accumulated dust and dirt After operating the machine for a period of time dust and dirt will accumulate on the vacuum entry on the bottom of the QQ 2 Plus Cleaning this area regularly will help ensure that the unit performs properly 1 Make sure the power of the QQ 2 Plus is turned off 2 Turn the unit upside down and brush any dust that has accumulated inside the vacuum entry as shown below Shake the dust out into a trash can 19 Cleaning and Maintenance QQ2 Plus Series Side Brush Vacuum Entry Cleaning the Rolling Brush Hair and other stringy items can get caught in the rolling brush over time 1 Make sure the power to the unit is turned off 2 Turn the QQ 2 Plus upside down and place it on a flat surface with the back of the unit facing you 3 Remove the Rolling Brush from its compartment by grasping the left side of the Rolling Brush and sliding it toward the right 4 Lift the free end of the Rolli
21. ng Brush out of the compartment then slide the Rolling Brush to the left freeing it from the flexible insert 5 Manually remove any hair string or other objects from the rolling brush to ensure proper performance ofthe unit 6 With the Rolling Brush removed loosen any dirt that has accumulated in the Rolling Brush compartment with a brush then dump the dirt into a trash can 7 Re install the rolling brush following the steps outlined in Rolling Brush Installation and Removal 20 Useful Tips QQ Plus Series Tip 1 Clear the area where the QQ 2 Plus is to clean of any items can be easily knocked over or caught in the Rolling or Side Brushes In order to provide the QQ 2 Plus a space for fast and safe cleaning please remove small items from the area before operating In the area where the QQ 2 Plus operates it might knock over items such as vases glasses or lamps Tip 2 Adjust the distance between furniture walls and other objects to beat least 36 cm 14 in Tip 3 Do not let the loose edges of rugs drapes table cloths etc to get caught in the QQ 2 Plus Roll under the loose edges of rugs and make sure that any table cloths drapes bedding etc do not hang down to the floor Remove plastic bags and leftover long shaped garbage When the QQ 2 Plus is cleaning rugs fold under the edges of the rug 2 Specification QQ2 Plus Series Useful Tips QQ Plus Series Tip 4 Fixi
22. ng jams Objects can get caught in the Rolling Brush and prevent it from working properly Immediately turn the unit off clear the object causing the jam and resume normal use When something is Turn the QQ 2 Plus Clean the vacuum jammed inside the QQ 2 upside down and Plus it will emit a beeping remove the objects sound b c ar S Ay 1 eai Tu p o WN Turn the Power switch vof the unit to OFF ta Tip 5 Block areas where the QQ 2 Plus could get stuck by placing objects in the way so that the QQ 2 Plus does not go into these areas Description Output 20Vdc 1000mA Input 100 240V 50 60 Hz 6000 hours continuously 16 5 18 5 cm sec Ni MH 14 4V 2 5Ah Rechargeable 3 5 hours of charging time 3V button Lithium battery CR2032 Infrared light with more than 3 meters controlling range 36cm Diameter x 9cm H or 14inch diameter x 3 5 inch H The space beneath some furniture is just high enough for the QQ 2 Plus ta get stuck underneath Use a potted plant to block the QQ 2 Plus and prevent it from going these places 5 types Spiral Special Bounce Along Wall S shape Polygonal Spiral Tip 6 Aim the remote control at the sensors on the front of the QQ 2 Plus Anything blocking the signal will affect the performance ofthe Fast adapter charger Life time of UV ray Capacity of dust bin Remote control Types of movement Dimension Specification D E Ka O C c uU O O
23. t cross the invisible barrier line 4 The effective distance of the Sonic Wall barrier is about 10 ft long 5 To turn off the Sonic Wall slide the power switch to position 0 to save battery power 6 The LED power indicator on Sonic Wall will start blinking when its battery power is low User can charge the Sonic Wall battery using the same CleanMate charger item No 5 on page 4 by plugging it into the charging socket on Sonic Wall When CleanMate detects the ultrasonic signals from Sonic Wall 1t will turn around and head to another direction 8 9 Self Charging Home Base QQ2 Plus Series Preparations 1 Find a proper place we recommend a hard surface floor to put the Self Charging Home Base in the room Leave about 20 inch 50 cm clearance around the Home Base 2 Connect the battery charger to the power input socket on the back of home base first Then place the metal plate of home base against the wall Don t leave loose wire around the wall Finally plug battery charger to AC power outlet on the wall 3 Make sure the LCD display on the Home Base 1s on This means that the Home Base has been powered on and it is ready to charge the QQ2 Plus WALL OUTLET Note the docking station must be placed against the wall Testing the Home Base 1 Put the QQ2 Plus on the floor close to the Self Charging Base and turn it on Now press the HOME key on remote control The QQ2 Plus should re
24. turn to the Home Base automatically for self charging 2 Make necessary adjustment to the Home Base if the QQ2 Plus can not dock on the Home Base properly Battery Charging Methods I When its battery is running low or after it has finished the cleaning job QQ2 Plus will try to automatically return to the Home Base to re charge itself Incasethe QQ2 Plus is unable to find the Home Base before battery power is depleted you can always charge it manually 2 When you charge the QQ2 Plus manually the battery will be charged no matter if the QQ2 Plus is on or off Make sure to connect the charger to the CleanMate first and then plug it to the AC outlet on the wall See the following diagram Scheduler Operations QQ2 Plus Series With the help of scheduler on QQ2 Plus user has the freedom to set up the cleaning time according to pre programmed schedule On this preset cleaning time QQ2 Plus will start the cleaning session automatically User can program it to start cleaning job at the same time on every day or on any day of week user choose The scheduler LCD panel is located on the top of the QQ2 Plus self charging base unit User needs to plug the AC adapter into QQ2 Plus self charging base and power up the scheduler before setting up the clock and cleaning times 1 Illustration of QQ2 Plus Scheduler LCD Panel gg SU LS a DS uU n EH ll NEZ wcoll B Cin o Min Wk GO SET Hr SET on
Download Pdf Manuals
Related Search