Instructions 10-07.pmd
Contents
1. VESTIL MANUFACTURING CORPORATION 2999 North Wayne St Angola IN 46703 Phone 260 665 7586 Fax 260 665 1339 E mail sales vestil com www vestil com Revised 10 07 A company dedicated to solving ergonomic and material handling problems since 1955 Drum Handling Equipment Contents Warnings and Safety Instructions Replacement Parts and Receiving INSTRUCTION GUIDE DELUXE ROTATING DRUM CART RDC 1000 DRIP PAN INSTALLATION INSTRUCTIONS What you will need Installation Instructions WARNINGS amp SAFETY INSTRUCTIONS e Ensure that all employees understand and follow the following instructions e Failure to read and understand these instructions before assembling the unit constitutes a misuse of the product All persons involved in performing this task must be familiar with this material e Maintenance and repairs are to be done only by personnel qualified to perform the required work Consideration will not be given for warranty repair charges without prior written authorization from the manufacturer REPLACEMENT PARTS We take pride in using quality parts on the equipment we manufacture We are not responsible for equipment problems resulting from the use of unapproved replacement parts To order replacement or spare parts for this equipment contact the factory In any communication with the factory please be prepared to provide the model and serial number of the unit RECEIVING INSTRUCTIONS It i2. s possible that this unit could incur damage during transit Inspect the parts and packaging closely when it arrives If you see evidence of damage or rough handling to either the packaging or to the unit when it is being received immediately make a note of it on the packing slip It is important that you remove the unit s packaging upon its arrival to ensure that there is no concealed damage or to enable a timely claim with the carrier for freight damage Also verify that the unit and its specifications are as ordered FOR DRIP PAN INSTALLATION YOU WILL NEED 1 Phillips Screwdriver 2 Crescent Wrench Approximate installation time 10 minutes DRIP PAN INSTALLATION INSTRUCTIONS STEP ONE Remove rear inside nut and bolt from both swivels casters STEP TWO Using original nuts and bolts install drip pan brackets Tilting drip pan forward slightly to clear bracket fingers slide drip pan into brackets Slide drip pan in or out to align with spout of drum NOTE All drip pan installations use existing hardware from the front swivel casters of the unit No hardware is shipped with the brackets
Download Pdf Manuals
Related Search