User`s Manual - Glove Lock
Contents
1. Article Glove Lock Item no 60510 Description Glove Lock with spanner rings TPT WT rice Easier than ever just tur Glove Lock JT S TTT Glove Lock q q G SI TECHEY SSS SSS SSS es ee Si TECH ES iy sitech se Fitting glove E 0 Contents 0088 00 wegen 2 x Glove Lock ring system 2 x Red spanner ring 60538 XL 4 x Green spanner ring 60537 L 4 x Blue spanner ring 60536 M 2 x Yellow spanner ring 60535 S IOU 1 x SI TECH Glove Lube 60540 2 x Spare O ring 80197 2 x Pressure equalization tube 60233 Fitting suit Choose appropriate Spanner Ring Red for extremely thin seals Blue for thick seals Place the Spanner Ring on the inside of the seal Accessories Choose appropriate Spanner Donning Ring Green for very thin gloves Yellow for heavy gloves Place Spanner Ring on the inside of the glove Fold the glove shaft inwards over the Spanner Ring Latex glove can be fitted and folded the opposite way Press the Spanner Ring and glove evenly into the Glove Ring Check for creases on the glove as creases may cause leakage Test the strength of attachment by pulling Glove Ring in the direction of the red arrow and the glove by the green arrow Tip When gloves are fitted custom trim the excess glove fabric on the inside for easier donning SI TECH PVC glove 60370 M 60380 L 60390 XL SI TECH LATEX GLOVE 61110 L 61111 XL Pu2. Ring is clean before replacing the O ring Check for creases on the seal as creases may cause leakage Test SI TECH Thinsulate liner the strength of attachment by Item no 60398 S M M L L XL pulling suit arm in the direction of Visit www sitech se for more products the red arrow and the Suit Ring by the green arrow WARNING Avoid any lubricant on seals Clean by disassemble and rinse all parts thoroughly in fresh water Dry before assembly Storage Store the rings apart ina debris free enviroment Press the assembly evenly ct into the Suit Ring 3 SI TECH Glove Lube Item no 60540 D 4 and information
3. t your hand through the seal and fit equalization tube between seal and wrist Make sure that the o ring and sealing surface are cleaned and lubricated Join the rings together as shown in pictures to the left Turn the rubber ring as shown in picture to the left Turn until click When clicked it s secured WARNING If high resistance occur take apart and lubricate with SI TECH Glove Lube WARNING If the rings are misaligned as shown in picture to the left then take apart and don again User s Manual Glove Lock Doffing Turn the rubber ring as shown in picture to the left Turn until the rings AJ have separated Tip Keep gloves on when doffing second ring The gloves provide a higher friction against the rubber ring Maintenance To change O ring Press see picture to the left the rubber ring and the plastic ring located on the inside of the rubber ring backwards so that you can access the O ring WARNING Be careful as excessive force may brake the rings Pinch the o ring and pick it out of the groove WARNING Be careful not to scratch groove or o ring when removing the o ring Lubricate surface marked with red in the picture to the left Lubricate with SI TECH Glove Lube WARNING Sand and debris caught up by lubricant on Glove Ring and or Suit Ring may cause leakage if not removed Remove O ring and make sure the O ring groove and adjoining surface on Suit
Download Pdf Manuals
Related Search