taking your first timelapse
Contents
1. Once the Genie is in place check that the bub To attach your came ble level on the top is showing the air bubble in the centre of the ring This will ensure that your shots will rotate perfectly flat Now attach your camera to the top of the ball head Orange warning print will be visible if it is not attached correctly w ra to the top of the Ge nie you can either use a tripod head or a ball head WB Screw this down securely to the top of the Ge nie using the 3 8 16 UNC thread co WWE ants gt ka K Using a Syrp Link cable matched to your camera model connect the 2 5mm end to the camera port on your Genie and the other end to the remote input on your camera TAKING YOUR FIRST TIMELAPSE The following will guide you through how to setup your first timelapse using a compatible DSLR camera Hold down the OK button to turn on the Genie Press OK on the timelapse recording option Here you will be presented with 4 options New Recording Clouds People Stars We recommend if you are new to timelapse that you choose one of the 3 presets For this example we will use Clouds Using the keypad scroll down to clouds and press OK Before pressing start be sure to set your camera up Take some test photos to get the exposure and framing correct To ensure that all of the images captured are consistent you should use the manual setting on t2. Move the release slide on the back of the Genie Screw the linear accessory to your slider by towards the unlock symbol While holding at un turning the knob in the centre of the linear ac lock pull the panning accessory off the base of cessory the Genie This may be quite tight when new Attach the rope clamps to each end of your Coil the rope around the rope clamp at one slider using the provided straps end Pull the other end of the rope so that it is tight and coil around the rope clamp at the other end Click the Genie into the linear accessory firmly Orange warning print will be visible if the Genie and check that the release catch is completely is not attached correctly closed To attach your camera to the top of the Ge Attach your camera to the top of the ball head nie you can either use a tripod head or a ball head Using a Syrp Link cable matched to your camera model connect the 2 5mm end to the camera port on the Genie and the other end to the remote input on your camera TAKING YOUR FIRST TIMELAPSE Hold down the OK button to turn on the Genie Press OK on the timelapse menu item to enter the timelapse mode Here you will be presented with 4 options New Recording Clouds People Stars We recommend that if you are new to time lapse to choose one of the 3 presets For this example we will use Clouds Using the keypad scroll down to clouds and pre
3. Do not handle a power plug with wet hands When unplugging a power plug grasp and pull the plug instead of the cord Do not scratch cut or excessively bend the cord or put a heavy object on the cord Also do not twist or tie the cords Do not connect more than one power plug to the same power outlet Do not use a cord whose insulation has been damaged Occasionally unplug the power plug and use a dry cloth to clean off the dust around the power outlet If the surrounding is dusty humid or oily the dust on the power outlet may become moist and short circuit the outlet to cause a fire Do not transport or store the device together with metal objects Do not strike throw drop or damage the device Do not try to pierce disassemble or modify the device Do not use the device in a corrosive environment Do not put the device into a microwave oven Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet do not use Protect the power cord from being walked on pinched or exposed to animals particularly at plugs convenience receptacles and the point where they exit from the apparatus Unplug this apparatus during lightning storms or when unused for long per
4. able to create repeatable moves so you never miss the unpredictable change in the environment 12 0 Advanced settings The advanced settings will help you to turther customize your Genie setup In timelapse mode enter the New Recording menu and navigate to the second screen this is located bellow the start menu item In this screen you will find the advance setup Press OK to enter advance setup Move shoot delay To reduce camera shake increase the Move Shoot Delay time This is the time your Genie will wait after moving and before it tells the camera to take a photo The default setting is 400ms but you can increase this to a maximum of 3000ms 3 seconds Bramping Bulb ramping enables you to shoot timelapses from day to night in situations where the light changes drastically Navigate to bramping and press the left or right buttons to turn bramping on Press OK to enter the bramping settings set your first exposure to the shutter speed you would like to use for your first shot and set the last exposure to the shutter speed you would like to use for your last shot Before starting your timelapse ensure your camera is switched to bulb mode Please note that most cameras fastest shutter speed in bulb mode is 1 second Cameras such as the 5D Mark III and some others can shoot as fast as 1 20 of a second in bulb mode HDR If your camera has HDR as a shooting setting then set it to this mode If not then set your cam
5. must ensue that you setup on both the Genie and your camera before you start Firstly turn on the genie and in Settings change the camera interface to IR The change the camera model setting to match that of your camera Then on your camera make sure that you turn of LCD preview Also make sure that your camera is setup to recive a remote signal Another thing to keep in mind if you are shooting in RAW is you must ensure there is enough time between frames for the camera to process the image This will ensure that no frames are skipped due to the picture buffer in the camera filling up This has been an issue that has occured with some cameras 14 0 Installing Firmware Complete the following steps to install the beta release v2 4 onto the Genie 1 SA Locate and Download the firmware release zip folder onto your computer from the Resources downlaods page at www syrp co nz support Unzip the folder to reveal the bin file v2 4 Take a blank FAT32 formatted USB key and load the bin file onto the USB stick Prepare the Genie for upload by ensuring the unit is powered down Insert the USB key into the USB port on the side of the Genie While holding down the back button press and hold the OK button simultaneously until the screen starts flashing black and white which indicates the unit is reading the bin file on the USB key After approx 10 secs the Syrp logo should appear and your Genie will load as nor
6. the device to fire or water and do not subject the device to strong physical shock Do not charge unattended or for longer than 4 hrs Keep the device away from children at all times If excessive heat smoke or fumes are emitted during recharging immediately unplug the battery charger from the power outlet to stop the recharging and prevent a fire If the device leaks changes color deforms or emits smoke or fumes remove it immediately Be careful not to get burned in the process Prevent any leakage from contacting your eyes skin and clothing It can cause blindness or skin problems If the battery leakage contacts your eyes skin or clothing flush the affected area with lots of clean water without rubbing it See a physician immediately During recharging keep the equipment away from the reach of children The cord can ac cidentally choke the child or give an electrical shock Do not leave any cords near a heat source It can deform the cord or melt the insulation and cause a fire or electrical shock Do not use the device where there is flammable gas This is to prevent an explosion of fire If you drop the equipment and the casing breaks opening and exposing internal parts do not touch the internal parts due to the possibility of electrical shock Do not disassemble or modify the device High voltage internal parts can cause electrical shock Do not store the equipment in dusty or humid places Do
7. the infrared emitter to connect with You can choose Canon Nikon Sony Olympus Pentax or Minolta Auto Off sets the waiting time before the unit powers down automatically when not being used We recom mend to keep this function active Sound Turns the internal soeaker ON OFF Time Adjust to match the current time in your region Units Change the units between Imperial feet and Metric cm m according to your preference Date Adjust to match the current date in your region Frame Rate Adjust the frame rate to match your workflow for shooting This will determine how other parame ters are calculated on the device Typically this is 30 fps tor North America and 25 fps for Euro pean Countries Shutter signal This is the time that the Genie sends a signal to the camera to tell it to take a photo Default set ting is 200ms Some cameras require a longer signal to register the shutter has been fired Auto Focus The time in which the Genie instructs the camera to Auto Focus for The default setting is off We recommend setting your camera to manual focus to avoid focus shifting throughout your timelapse Load factory defaults Reset the settings back to factory parameters All presets and other user settings will be lost Exit To exit the settings menu just press Back All changes are automatically saved Using the IR Link cable If you are using the IR link cable there are a few things that you
8. the linear or panning accessory No orange should be visible on the release latch Important safety Instructions READ THESE INSTRUCTIONS KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS Clean only with dry cloth The Unit is a precision instrument Do not drop it or subject it to physical shock Do not use this apparatus near water The unit is not waterproof and cannot be used under water If you accidentally drop the device into water promptly contact Syrp Wipe off any water droplets with a dry cloth If the device has been exposed to salty air wipe it with a well wrung wet cloth Never leave the device near anything having a strong magnetic field such as a magnet or electric motor Also avoid using or leaving the device near anything emitting strong radio waves such as a large antenna Do not leave the device in excessive heat such as in a car or direct sunlight High tempera tures can cause the device to malfunction Never attempt to disassemble the device If the device is suddenly brought in from the cold into a warm room condensation may form on the device do not use the device This is to avoid damaging it If there is condensation remove any accessories and wait until the condensation has evaporated before using again Avoid storing the device where there are corrosive chemicals such as a darkroom or chemi cal lab Do not use or leave the device or battery charger in a hot environ
9. you like to shoot with you can adjust the interval setting and the play time will update to match Note If you are shooting long exposures make sure that the interval is long enough to allow the camera to finish capturing the image as well as process the data Movement This sets the angle in panning or distance in linear as well as the direction Press the Left or Right keys to adjust the value Press the OK button to change the direction Preview This runs the Genie at the video playback speed based on the settings you have chosen You can use this to preview how your movement will look in your compiled video Note If the real time play speed of your setting is faster than the maximum drive speed of the Genie the preview function will be greyed out Save as new pre set If you want to keep your setup and use it again on other shoots you can save it This will add a new preset to the timelapse menu Start Once you have been through these settings you can hit start and your timelapse will begin Advance Setup In the advanced settings you can adjust the move shoot delay This is the time that the Genie will wait after it has finished moving and before it sends the signal for your camera to take a photo If you have a heavy setup or an unstable rig then adjusting the move shoot delay will help settle any camera shake before capturing the next image 3 0 melapse with video camera When using a video camera with the
10. Genie there is no link between the Genie and the camera You will need to set up the timelapse functions on your video camera using the instructions pro vided by the manufacturer Once you have setup the video camera to record a timelapse you should enter the video mode on the Genie Select video from the main menu then select New recording In this menu you can adjust the settings for the capture time as well as the angle panning move ments or distance linear movements that the genie will move Press the Left or Right buttons to set the capture time to the total recording time you would like to capture your timelapse for Press the Left or Right button to set the angle or distance of travel you would like the genie to move throughout your timelapse Press OK on the movement setting to change the direction of the movement Once you have started the timelapse recording on your camera press OK on start in the Genie menu The Genie will slowly rotate over the capture time 10 0 Auto start countdown In the recording mode menu select Auto Start to enter the settings Timer select countdown timer using the left right button to set a countdown time before the recording starts Countdown timer sets the time before your chosen recording will start Mode select either timelapse or video according to what type of recording you would like to take Preset select your recording settings from a preset Yo
11. Syrp WWW SYRP CO NZ GENIE INSTRUCTION MANUAL V2 4 RELEASE About this guide THANKS FOR PURCHASING A GENIE AND WELCOME TO THE SYRP FAMILY The Genie is a simple affordable and extremely easy to use motion control device for Time Lapse Photography real time video Simply attach your camera to the top of the Genie plug it in using the matching cable for your camera and program it to move and shoot to your desired needs In this guide you ll find everything you need to know to get filming and a whole lot of others things we need to tell you to protect you and us For detailed instructions and tutorials on how to use your Genie check out www syrp co nz We hope that the Genie helps to expand your creativity and assists you in making better films for the world to see Please stay in touch with us join our community and show us your work Website www Syrp co nz Facebook www facebook com syrp co nz Twitter www twitter com Syrp_ Instagram www instagram com Syrp_ Google www gplus is syrp WHATS IN THE BOX x Genie 1 x Panning mount x Linear mount 1 x length of 3m Braided rope 1 x International wall charger 2 x Slider mounts PAR oN DISCLAIMER syrp has made every effort to provide clear and accurate information in this product guide which is provided solely for the user s information While thought to be accurate the information in this document is provided strictly as is and Syrp will not be held resp
12. ceiver is con nected 4 Consult the dealer or an experienced radio TV technician for help Warning Operation with non approved equipment is likely to result in interference to radio and TV reception Changes and modifications made to the equipment without the approval from Syrp could void the user s authority to operate this equipment Note This device complies with Part 15 of the FCC Rules Operations subject to the following two conditions 1 this device may not cause harmful interfer ence and 2 this device must accept any interference received including interference that may cause undesirable interference Product warnings NEVER USE THIS PRODUCT WITHOUT FULLY UNDERSTANDING THE FUNCTIONS AND SAFETY PRECAUTIONS SEE WWW SYRP CO NZ FOR OPERATION GUIDES WARNING To reduce the risk of fire or electric shock do not expose this equipment to rain or moisture To reduce the risk of fire or electric shock hazard keep this equipment away from all liquids Use and store only in locations which are not exposed to the risk of dripping or splashing liquids and do not place any liquid containers on top of the equipment WARNING Always keep the product and all accessories including panning and linear accessory rope tooth belt rope fastening accessories connection cable ball head wall charger screws and all pack aging out of reach of babies and small children CAUTION To reduce the risk of fire or electric shock and annoyi
13. era up to take multiple exposures using its exposure bracketing function Navigate to HDR and press the right arrow button to adjust the HDR signal time to match the total sequence time of your camera Ensure that the signal time value on the Genie is equal to or more than all exposure times combined Ease In Out Adjust the ease in out to create a dampening movement effect at the start and end of your timelapse or video recording Press the right button on the keypad to set how long the Genie will ramp the movement for at the start and end of the move these are real time playback speed values 13 0 system settings menu Navigate to the bottom of the main menu to take full control of the settings that make the Genie tick The following options will be available Help If you would like to know more about using the genie you can scan the QR code and head straight to the support section on our website Here you will find the instruction manual and tutorials and you can also get in touch with us to solve any other questions you may have About shows the model of Genie you have as well as the current version of the firmware Camera interface Displays how the Genie will connect with your camera By default wire is selected which enables connection via the Syrp Link cable supplied with your Genie Other options include IR infrared LANC Red or USB Camera model When IR is selected then choose your camera model that you would like
14. erved Syrp the Syrp logo and the Genie logo are trademarks or registered trademarks of Syrp Ltd in New Zealand and or other countries All trademarks trade names icons logos written material images code and product names used in association with this product are copyrights trademarks or other intellectual property exclusively owned and controlled by Syrp Ltd Syrp Ltd also has patents pending All other company brand and product names are trademarks or registered trademarks of their respective holders Syrp has no affiliation to is not associated or sponsored with and has no express rights in third party trademarks 9 Contents INTERNATIONAL PRODUCT COMPLIANCE PRODUCT WARNINGS IMPORTANT SAFETY INSTRUCTIONS OVERVIEW OF THE GENIE GETTING STARTED TAKING A PANNING SHOT TAKING A LINEAR SHOT NEW RECORDINGS AND SAVING PRESET TIMELAPSE WITH VIDEO CAMERA 10 ADVANCED SETTINGS MENU 11 SYSTEM SETTINGS MENU 12 UPDATING FIRMWARE 13 KNOWN FIRMWARE BUGS international product compliance Model Number G01 Trade Name Syrp Responsible Party Syrp Limited 43A Linwood Ave Unit 7 Auckland New Zealand Support Contact 64 9 845 6319 INDUSTRY CANADA EMISSION COMPLIANCE STATEMENTS This digital apparatus has been tested and complies with Canadian ICES 003 standards Cet appareil num rique de la est conforme a la norme NMB 003 du Canada AUSTRALIA AND NEW ZEALAND STATEMENT OF CONFORMITY The device wa
15. erwise arise from inappropriate waste handling Please contact your local authority for further details of your nearest designated collection point Penalties may be applicable for incorrect disposal of this waste in accordance with you national legislation For business users in the European Union if you wish to discard electrical and electronic equip ment please contact your dealer or supplier for further information FEDERAL COMMUNICATIONS COMMISSION FCC STATEMENT This device was tested pursuant to applicable test procedure and complies with the requirements of FCC Part 15 Subpart B Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation Caution This equipment generates uses and can radiate radio frequency energy and if not in stalled and used in accordance with the instructions may cause harmful interference to radio com munications However there is no guarantee that interference will not occur in a particular installa tion If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the re
16. hanged Up and Down keys will change the value and press OK to confirm Set the time Press OK to select the menu item to be changed Use the Left and Right keys to select the value to be changed Up and Down keys will change the value and press OK to confirm Set the frame rate Press left or right to change the frame rate This is the soeed at which you like to edit and play your videos at once compiled and is used as the basis of making recording calculations We recommend 30 fps for North America and Japan and 25 fos for Europe and Australasia Scroll down to Go then press OK to save your settings faking a panning snot The following will guide you through the steps required to take a simple panning time lapse or video shot with the Genie ATTACHING TO YOUR TRIPOD If you have just taken your Genie out of the box the first thing you will need to do is remove the panning accessory from the base of the Genie Using a finger or thumb move the release slide Attach the panning accessory to your tripod on the back of the Genie towards the unlock legs using the large threaded hole 3 8 16 symbol While holding in the unlock position UNC or onto a tripod head using the small pull the panning accessory off the base of the threaded hole 1 4 20 UNO Genie This may be tight when new Click the Genie into the panning accessory firmly and check that the release slide is com pletely closed
17. he camera Now that the camera is setup you can press start on the Genie The clouds preset will run for 30 minutes sending signals to your camera to take photos as well as rotating very slowly 90 degrees in the clockwise direction TAKING YOUR FIRST VIDEO Hold down the OK button to turn on the Genie Scroll down to Video using the arrow keys then press OK to enter the video mode Here you will be presented with 3 options New recording Fast Slow To get started we recommend to try either of the presets For this example we will use Fast Using the keypad scroll down to Fast and press OK Before pressing start be sure to set your camera to video mode and press record Now that the camera is setup and recording you can press start on the Genie The Fast preset will run for 10 seconds rotating your camera 90 degrees in the clockwise direc tion Once it has finished moving be sure to end the recording session on your camera U laking a linear shot The following will guide you through the steps required to take a simple linear time lapse or video recording with the Genie A A NI w N uy s a s m 1 Tal 3 I f Y i A i A 5 L j J N JUN f J J dd DELE w E A 6 w W U lu km 8 im Nts w im W mn n 4 If you have just taken your Genie out of the box the first thing you will need to do is remove the panning accessory from the base of the Genie
18. iods of time IMPORTANT A Lithium ion polymer battery that is recyclable powers the product you have purchased Please call 1 800 8 Battery for information on how to recycle this battery FOR CALIFORNIA USA ONLY This product contains a CR Coin Cell Lithium Battery which contains Percholorate Material Special handling may apply see www dtsc ca gov hazardouswaste perchlorate Overview of the Genie a Power button OK Button g Level b Keypad h Camera connection port c Back Button I USB port d Display j Interface port e 3 8 16 UNC Thread k Quick release latch f DC Power Connector 12V 15V Rope attachments DISPLAY SYMBOLS Panning Linear O lt Getting started Before you start read the manual fully and make sure the Genie is fully charged Connect the appropriate wall plug to the DC Insert the DC plug into the Genie and check adaptor that the light around the OK button turns or ange which means the Genie is charging The Genie needs to be turned ON while charg ing During charging the Genie will still enter Once fully charged the light will turn green for 5 standby mode as per normal seconds before turning off entirely FIRST TIME SETUP The following explains how to setup your Genie for the first time Hold down the OK button to turn on the Genie Set the Date Press OK to select the menu item to be changed Use the Left and Right keys to select the value to be c
19. mal entering the Setup screen Remove the USB key set the time date units and frames per second according to your region navigate to Go and press OK scroll down to settings and hit OK then scroll to About and check that current firmware reads v2 4 Go filming Do not use hard drives or other external USB devices to load the firmware Some USB keys draw too much power to correctly function Do not load the zip file onto the USB key You must unzip the folder and load only the bin file with nothing else on the USB key USB3 0 Keys or any key over 16GB will not work Please note that uploading new firmware will wipe all existing presets and settings on the Genie If you wish to keep settings please make a note of them and reinstall after update If the red indicator light around the OK button stays solid red then the firmware has not correctly installed Power off the device and try again Consider trying a different USB key Tested USB keys include Sandisk Cruzer Fit Sandisk Cruzer Blade Generic 2GB Video firmware ugrade tutorial vimeo com syrp firmware Go filming Contact JK Syrp Limited Please send feedback to Epi 43A Linwood Ave Suite 7 syro syrp co nz Mt Albert 1025 Auckland www Syrp co nz New Zealand 64 9 845 6319 SI twitter com syrp U vimeo com syrp instagram com syrp_ Qt gplus is syrp f facebook com syrp co nz gt youtube com user syrpey
20. ment Doing so may cause battery leakage or a shorter battery life The device can also become hot and cause skin burns Do not use paint thinner benzene or other organic solvents to clean the equipment Doing so may cause fire or a health hazard Do not use or charge near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Only use attachments accessories specified by the manufacturer Use only with the tripod stand slider ballhead or support apparatus specified by the manu facturer or sold with the apparatus When apparatus are used use caution when moving or transporting to avoid injury from tip over Refer all servicing to qualified service personnel Servicing is required when the device has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled objects have fallen onto the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped PREVENTING FIRE EXCESSIVE HEAT CHEMICAL LEAKAGE AND EXPLOSIONS FOLLOW THE SAFEGUARDS BELOW Do not use any external batteries power sources and accessories not specified by Syrp Do not use any home made or modified external power supply or batteries Do not short circuit disassemble or modify the device or battery inside Do not apply heat or apply solder to the internal battery or any attached external devices Do not expose
21. ng interference use the recommended ac cessories only CAUTION Do not carry jar swing or shake the unit by any attached accessories including cameras ball heads cables or other equipment Any strong jolt may damage the unit or result in personal injury CAUTION Only install the AC adaptor in an AC receptacle mains socket outlet that match the plug type be ing used are in perfect working condition and are compliant with all local safety regulations The AC receptacle mains socket outlet to be used should be located near the equipment and shall be easily accessible To completely disconnect this equipment from the AC mains disconnect the AC adaptor from the AC receptacle CAUTION Danger of explosion or fire if battery is tampered with or mistreated Do not disassemble the unit to access the battery or dispose of the unit and or the battery in fire Do not store the unit in temperatures over 50 C 104 F or below 20 C 4 F Do not expose the unit and or battery to excessive heat such as sunshine fire or the like Always use the specified charger to recharge the battery Do not attempt to replace the battery it is not user replaceable CAUTION This apparatus can be operated and charged from a DC voltage in the range of 12 15V DC CAUTION The AC adaptor is designed to operate at the following AC voltages and frequencies only 100 240V 50 60Hz 0 4A The rated output voltage and current is 15V DC 1 2A 18W Max Opera
22. not use the device in hospitals or airplanes Electromagnetic waves emitted by the de vice may interfere with the planes instruments or medical equipment OPERATING PRECAUTIONS Do not allow any water to get into the device when using it in the rain or snow or at the beach Also do not allow any sand or dust to get into the device when using it at the beach or other similar places Sand and dust can damage the device Failure to heed this caution will cause the device to malfunction and may result in irreparable damage The powerful magnetic fields generated by speakers or large motors may damage the de vice Do not use the camera recorder near radio transmitters or high voltage equipment Using the device near a radio transmitter or high voltage equipment may damage the equip ment and adversely affect your results The AC adaptor battery charger can interfere with radio reception so keep radios at least 1 meter away from it Take precautions not to drop the camera when moving it Strong impacts may damage the device and cause it to stop working Handle the device with care using both hands to carry it Do not spray the device with insect sprays or other volatile substances These can warp the device or cause the finish to come off Do not leave the device in contact with rubber or PVC products for extended periods of time LIQUID CRYSTAL DISPLAYS Images or letters can get burned onto the screen of the LCD o
23. onsible for issues arising from typographical errors or user s interpretation of the language used herein that is different from that intended by Syrp All safety and general information is subject to change as a result of changes in local federal or other applicable laws syrp reserves the right to revise this Operation Guide and make changes from time to time in the content hereof without obligation to notify any person of such revisions or changes In no event shall Syrp its employees or authorized agents be liable to you for any damages or losses direct or indirect arising from the use of any technical or operational information contained in this document Note concerning illustrations in these instructions Illustrations in these operating instructions differ slightly from the actual product Syrp makes no guarantees for your recordings images In the event that content was not recorded or images taken due to a fault related to the device during use please understand that no compensation can be provided and Syrp will not be held responsible in any way For full user manual and operating instructions refer to www syrp co nz support COPYRIGHT AND TRADEMARKS Copyright laws in your country may prohibit the use of recorded images of people places or other subjects for public or private enjoyment Also be aware that certain public performances exhibitions or other events may prohibit recording images 2014 Syrp Ltd All rights res
24. ove Continue will repeat the move continuously without returning to home first You may also choose to power off or return home post recording Repeat delay Set the delay time between the end of your move and the start of the next repetition you may also choose no delay to run the recording without interruption Number of repeats select the number of times you would like to repeat the recording Start Press start to begin the recording Note be sure to set the date amp time up correctly in the settings menu before using the time amp date feature Bounce Back Mode Bounce back mode is found in autostart This is used to repeat the same move back and forth It can be used in timelapse or video mode with the panning or linear accessory Setting up bounce back mode Set up your desired movement in either timelapse or video mode and save as a new preset Go back to the main menu and enter the Autostart menu Select your preset and setup the timer you wish to use In autostart under Post Recording select Bounce Back then set the number or repeats you wish 5 repeats will perform a movement 5 times so there and back twice and then there again This mode is very useful single person crew situations for interviews If you set your Genie up in bounce back mode with your desired settings you will be able to get a dynamic second camera angle without the need for a second cameraman For timelapse you are
25. r viewfinder if they are dis played for a long time but you can fix this by leaving the device off for several hours Less than 0 01 of the pixels that may not light or may remain on all the time These phe nomena are normal Condensation may form if you use the device where temperatures fluctuate Wipe dry with a soft dry cloth Do not point the display at the sun Doing so may damage the parts inside Use a blower to blow away dust on the LCD Do not use cleaners that contain organic sol vents to clean the body or LCD AC ADAPTOR BATTERY CHARGER AND INTERNAL BATTERY The rating plate is on the back of the AC Adapter Disconnect the AC adaptor from the AC mains socket when not in use This device uses rechargeable lithium polymer batteries The ambient temperature and humidity will effect the operating time If you use the device at loca tions with extremely low temperatures its operating time will be reduced Do not try to access the batteries within the device Do not immerse the device in water or other liquid Do not use or leave the device near a heat source such as fire or heater Do not use the device to power any other device When recharging only use specified battery charger Do not discard the device in fire or expose it to a flame Do not short circuit the device by directly connecting the positive and negative termi nal with metal objects Always insert the power plug all the way in
26. s tested pursuant to applicable test procedure and complies with the requirements of AS NZS CISPR 22 2009 Information technology equipment Radio disturbance characteristics Limits and Methods of Measurement EUROPEAN UNION COMPLIANCE STATEMENTS syrp declares that the equipment described in this document conforms to the requirements of the European Council EMC Directive RoHS directive and WEEE Directive This device has been tested and complies in accordance with the following applicable directives 2004 108 EC Electromagnetic Compatibility As Amended This device has been assessed against the following applicable standards EN 61000 6 3 2007 A1 2011 EN 61000 6 1 2007 EN 61000 3 2 2006 A2 2009 EN 61000 3 3 2008 The Waste Electrical and Electronic Equipment WEEE mark applies only to countries within the Eu ropean Union EU and Norway This symbol on the product and accompanying documents means that used electrical and electronic products should not be mixed with general household waste For proper treatment recovery and recycling please take this product to designated collection points where it will be accepted free of charge Alternatively in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product Disposing of this product correctly will helo save valuable resources and prevent any potential neg ative effects on human health and the environment which could oth
27. sion on your camera 0 0 New recordings and presets Time to get creative We ll now give you a bit more of a run down on each of the settings that you can adjust to create your own unique timelapse and video recordings We will use the panning setup throughout but all of these settings apply to the linear setup as well TIMELAPSE With the panning accessory in place and the Genie turned on enter the timelapse mode by pressing OK on the timelapse menu item Press OK again to enter the New recording menu In here you will be able to adjust all of the various settings required to capture a timelapse using either the traditional method setting via the shot interval or the real time method specifying the compiled video play time Rec time This is the total time the Genie will run for during the timelapse at your location Set this to a time that suits the scene you are shooting Play time This is the time that you would like your final video to play for after you have compiled all of the images The Genie will use this setting and the frame rate you set to determine the total number of shots it needs to take and how long to wait between each of them By adjusting this value the interval between the shots will also change Interval The interval is the time between each of the shots the Genie tells your camera to capture The interval will be calculated from the Rec time and the Play time If you have a particular interval
28. ss OK Before pressing start be sure to set your camera up Take some test photos to get the exposure and framing correct To ensure that all of the images captured are consistent you should use the manual setting on your camera The clouds preset will run for 30 minutes taking a photo and moving very slowly 85cm down the slider in the direction of the symbols on the linear accessory Make sure that you have enough track on the side of the linear accessory for the Genie to complete its movement Now that the camera is setup you can press start TAKING YOUR FIRST VIDEO Hold down the OK button to turn on the Genie scroll down to Video using the arrow keys then press OK to enter the video mode Here you will be presented with 3 options New recording Fast Slow To get started we recommend to try either of the presets For this example we will use Slow Using the keypad scroll down to Slow and press OK The Slow preset will run for 60 seconds moving very slowly 85cm down the slider in the direc tion of the symbol on the linear accessory Make sure that you have enough room on the side of your track for the Genie to complete its movement Before pressing start be sure set your camera up in video mode and press record Now that the camera is setup and recording you can press start on the Genie Once it has finished moving be sure to end the recording ses
29. tion at voltages other than these may require the use of a different AC Plug Please contact Syrp for assistance in selecting an alternate AC Plug CAUTION In order to maintain adequate ventilation do not install or place this unit in a bookcase built in cabinet or any other confined space To prevent risk of electric shock or fire hazard due to over heating ensure that is not covered by anything that may obstruct the ventilation Do not use or charge the device in temperatures below 2 C 35 or above 30 C 86 F CAUTION Do not lift the unit by its body when a tripod or other equipment accessory is attached When a tripod or other equipment accessory is attached its weight will also affect the units handling possibly causing the unit to break as well as possibly hurting the user Instead always detach the unit from the equipment accessory and transport separately CAUTION Do not leave the unit in direct contact with the skin for long periods of time when in use Low temperature burn injuries may be suffered if the high temperature parts of this unit are in direct contact with the skin for long periods of time When using the equipment for long periods of time make use of tripods or other equipment accessories CAUTION Do not cover or wrap the device or AC adaptor with a cloth or any other material Doing so may trap heat within and cause the casing to deform or catch fire CAUTION Ensure the Genie is securely attached to
30. u can use one that comes with the Genie already or one you have saved out already Post recording select what happens after the recording has finished Repeat will return the Genie to it s start point and repeat the programmed move Continue will repeat the move continuously without returning to home first You may also choose to power off or return home post recording Repeat delay set the delay time between the end of your move and the start of the next repetition you may also choose no delay to run the recording without interruption Number of repeats select the number of times you would like to repeat the recording Start Press start to begin the recording 11 0 Auto start Time amp Date In the recording mode menu select Auto Start to enter the settings Timer select time amp date using the left right button to set a countdown time before the recording starts Time Using the 24 hour clock set the time in which you would like to start the recording Date select the date in which you would like the recording to start Mode select either timelapse or video according to what type of recording you would like to take Preset select your recording settings from a preset You can use one that comes with the Genie already or one you have saved out yourself Post recording select what happens after the recording has finished Repeat will return the Genie to It s start point and repeat the programmed m
Download Pdf Manuals
Related Search