Home

MadgeTech PRHTemp2000 Data Logger Manual PDF

1. DOWN No function Page 29 MadgeTech PRHTemp2000 mi 6 1 Calibration Information Screens Pressure Calibration ET FRESSURE CALIERATION GIN 1 BRR OFFSET H BRR UMITS PSIA il HORE Il EXIT Displays calibration information for pressure channel For all Device Information Screens F1 PRESS no function F3 MORE shows further calibration information screens F4 EXIT Returns to Device Configuration Menu CANCEL Returns to Device Configuration Menu OK Returns to Device Configuration Menu UP No function DOWN No function 6 2 Device Reset Screen Hardware Reset H A HARDWARE RESET HA OCCURRED VERIFY DATA AND CLOCK FOR FROFER OFERATION oF l Il Il l Displayed as notification when a hardware reset has occurred F1 OK accepts notification and displays main screen F2 no function F3 no function F4 no function CANCEL no function OK accepts notification and displays main screen UP no function DOWN no function Page 30 Data Logger Manual 6 3 Device Reset Screen Power Interruption a FOWER WAS INTERRUFTED DURING DEVICE OFERATIOR RCON Danel N on Il Ii Ii Displayed as notification when power is interrupted during device operation F1 OK accepts notification and displays main screen F2 no function F3 no function F4 no function CANCEL no function OK accepts notification and displays main screen
2. F1 RUN displays run parameters screen F2 MEM displays memory status screen F3 TIME displays time information screen F4 MORE displays the second status screen CANCEL returns to main screen Page 18 Data Logger Manual OK returns to main screen UP no function DOWN no function 6 3 Status Screens Memory Status EER HEFIOEY STHTUS GT MEMORY LEFT 99 READINGS EL MAH READINGS Brasl WERF Disabled kun MA TIME I HORE Displays information about the device s memory capabilities including percent of memory available memory left number of readings taken so far readings max number of readings max readings and wrap For all status screens F1 RUN displays run parameters screen F2 MEM displays memory status screen F3 TIME displays time information screen F4 MORE displays the second status screen CANCEL returns to main screen OK returns to main screen UP no function DOWN no function 6 4 Status Screens Time EE DATE AMD TIETE CURRENT DATE A CURRENT TIME 1 READING DATE A READIMG TIPE 1 S TIME ZOME E L RUN I MEM ISTE Hore Displays current time and date as well as registered time and date and time zone information For all status screens F1 RUN displays run parameters screen F2 MEM displays memory status screen Page 19 MadgeTech PRHTemp2000 MEE F3 TIME displays time information screen F4 M
3. FRESS OK Displays units currently being used for each channel F1 TEMP selects temperature channel for unit change F2 HUMID selects humidity channel for unit change F3 PRESS selects pressure channel for unit change Page 22 Data Logger Manual F4 OK returns to Main Screen Note unit selection can be changed by pressing the corresponding function key repeatedly or using the UP and DOWN arrows to select appropriate units CANCEL returns to main menu without accepting changes OK accepts changes and returns to main menu 6 11 Device Configuration Menu H SELECT AN DOFTIOM EELO DISFLAvI FOWER I INFO Il EXIT Displays options available within the device configuration menu F1 DISPLAY enters Adjust Visibility screen F2 POWER enters Power Modes screen F3 INFO goes to Device Information screens F4 EXIT returns to main screen CANCEL returns to main screen OK returns to main screen UP no function DOWN no function 6 12 Adjust Visibility ETE ADJUST VISIBILITY TEMFERATURE Show HUMIDITY Show FRESSURE Show TEHF HUMID PRESS N MORE Displays options for changing the viewing of the three channels on the main screen either shows a particular channel or hides it F1 TEMP first highlights and then changes the viewing options of the temperature channel F2 HUMID first highlights and then changes the viewing options of the hu
4. Seller warrants to Buyer that i Seller manufactured Software as defined in Section 23 below shall execute the program ming instructions provided by Seller and ii Seller manufactured Product and consumables and Seller provided services shall be free from material defects in material and workmanship under normal uses and care in each case until the expiration of the applicable warranty period specified below Seller manufactured Product is warranted for the shorter of twelve 12 months from the date of initial installation or fifteen 15 months from the date of shipment by Seller Seller man ufactured consumables and Software and Seller provided services are warranted for a period of ninety 90 days from the date of shipment or completion as applicable If Buyer discovers any warranty defect and notifies Seller thereof in writing during the applicable warranty period Sell er shall at its option promptly correct any defects that are found by Seller or repair or replace F O B point of manufacture that portion of the Seller manufactured Products consumables or Software found by Seller to be defective or refund the price of the defective portion of the Seller manufactured Products consumables or Software or of the defective portion of the Seller pro vided services All replacements or repairs necessitated by inadequate maintenance normal wear and usage unsuitable power sources unsuitable environmental conditions accident misus
5. Maximum Device Range an DEVICE RANGE ane ILMU a 333 15 Jo a 2 BOBA ad L HIN TEER AL TL HORE Displays values indicating maximum temperature pressure and humidity detect able by the PRHTemp2000 6 2 Device Information Screens Device Version REVISTOM SUETYFE HzAHHHHH EAUD RATE 1152 TA FR N MORE Il EXIT Displays device version information F1 VERS no function F2 FIRM shows Firmware Version screen F3 MORE shows Device Range Minimum screen F4 EXIT Returns to Device Configuration Menu CANCEL Returns to Device Configuration Menu OK Returns to Device Configuration Menu UP No function DOWN No function Page 27 MadgeTech PRHTemp2000 Smm 6 1 Device Information Screens Firmware Version ER FIRWHARE VERSION WERSIOM ui Ae DATE He 7 39 76 CHECKSUM HEaaB VERS IT HORE I Exit Displays device firmware version information F1 VERS shows Device Version screen F2 FIRM no function F3 MORE shows Device Range Minimum screen F4 EXIT Returns to Device Configuration Menu CANCEL Returns to Device Configuration Menu OK Returns to Device Configuration Menu UP No function DOWN No function 6 1 Calibration Information Screens Calibration Date EE CALIERATIOWN DATE CAL DATE Hever CAL DUE Required B TEHF HUMID HORE Displays date of last calibration an
6. UP no function DOWN no function Page 31 MadgeTech PRHTemp2000 Se Section 7 Computer Interface AS 2 CABLE CONNECTS TO Py SEMAL PORT ON TOUR PC MFLd10 STEREO PLUG CONNECTS WITH URCE IH YOUR DATA LONGER USE CABLE COHREGTS TO ro USE FORT ON TOUR PC al 1 Fully insert the male connector of the IFC110 interface cable into the female receptacle of the data logger Insert fully the RS232 connector into the Serial Port OR 2 Fully insert the male connector of the IFC200 interface cable into the female receptacle of the data logger Fully insert the female USB con nector into the USB Please see the MadgeTech Datalogger Software manual for further information Note Most Madgelech data loggers can use both IFC110 and IFC200 interface cables For interface cable data logger clarification contact technical support at 603 456 2011 or support madgetech com Page 32 Data Logger Manual aa Section 8 Wall Mounting 0 TE ss MAN Pee PCC PGO 69 Pd A47 ad ee lied ee ad Ted La HE eee DEE Ve kai KD AAT K Mk DAE E l fl ae N YZ mnj EMS 19 MAN SAA C N B mg e KD N 1 6 HEAD sm V6 ded Ed EE i Power Supply Cable Slot Page 33 MadgeTech PRHTemp2000 mi Section 9 Maintenance BATTERY WARNING Most MadgeTech data loggers contain a lithium battery Do not cut the battery open incinerate or recharge Do not heat lithium batteries above the
7. and then selecting either F1 for temperature F2 for humidity or F3 for pressure After selecting a channel the available units can be scrolled through by either pressing the channel s function key repeatedly or using the UP and DOWN keys Button pressing chain Main Screen gt F3 gt F1 temp F2 humidity or F3 pressure gt function key repeatedly or UP and DOWN 4 2 Changing the number type and size of channels viewed By default the PRHTemp2000 displays recently measured values of all 3 chan nels temperature humidity and pressure on its Main Screen with the three channels taking up the maximum amount of screen space available Chan nels can however be hidden or viewed on a smaller or larger scale To change the number and type of displayed channels From the Main Screen press the F4 key to enter the Setup Menu and from this menu press the F1 key to enter the Display screen On this screen F1 corresponds to the Temperature channel F2 to Humidity and F3 to Pressure Pressing these function keys will cause the channels to scroll between show or hide channels displaying show will appear on the main screen and channels displaying hide will not Any number of channels between zero and three may be shown Button pressing chain Main Screen gt F4 F1 F1 temp F2 humidity or F3 pressure To change the size of displayed channels From the Main Screen press the F4 key to enter the Setu
8. battery power remaining and the presence of external power and options regarding the LCD display and the backlight can be modified The setup menu is also the place to find basic information regarding device identification calibration parameters and firmware details 5 5 1 Display From the Display section the number and identity of channels shown on the main screen can be changed and set the LCD screen s contrast values can be changed and set and the size the channel information appears on the main screen can be changed and set Pressing F1 while in the Setup Menu brings up the Display section 5 5 i a Adjust Visibility The first screen that appears in the Display section is the Adjust Visibility screen Here the F1 F2 and F3 keys correspond to the temperature humidity and pressure channels respectively Pressing one of these function keys results in highlighting its corresponding channel function tab While a channel is highlighted the corresponding display function can be toggled between Hide and Show with Hide indicating that the channel will not be displayed on the main screen and Show Page 13 MadgeTech PRHTemp2000 P indicating that it will be shown Channels can be toggled by either repeatedly pressing the channel s corresponding function key or by using the UP and DOWN keys 5 5 i b Display Configuration By selecting MORE either by pressing the F4 key on the Adjust Visibility Screen o
9. Device Reset Screen Power Interruption sesse sees ee 31 Section 7 Computer Interface eee eee eee see ee eed ed AA AE ed 32 Section 8 Wall Mounting sss sees sese eee eee eee eee eed ed AA ee ed 33 Section 9 Maintenance esse sesse ee eee 34 Page 2 Data Logger Manual Section 1 Device Safety CAUTION DEVICE MUST BE USED ONLY IN A MANNER CONSIS TENT WITH THIS MANUAL NOTICE WHEN 230VAC SUPPLY USED MADGETECH SPECIFIES USE OF AC SUPPLY PART T35 9 100R 3 MANUFACTURED BY ENG ELECTRIC THIS SUPPLY IS AVAILABLE FROM MADGETECH 1 1 Model information e Model PRHTemp2000 e Description Measure amp record temperature humidity atmospheric pressure with LCD display e Manufactured by Madgelech Inc Warner NH USA 1 2 Specifications Temperature Range 20 to 60 C Resolution 0 1 C Calibrated Accuracy 0 5 C 0 to 50 C Humidity Range 0 to 95 RH Resolution 0 1 RH Calibrated Accuracy 3 RH 2 RH typical at 25 C Specified Accuracy Range 10 to 40 C 10 to 80 RH Pressure Range 0 to 30PSIA Resolution 0 002PSIA Calibrated Accuracy 1 0 FSR at 25 C 40 2 typical Dot Matrix LCD Dimensions 2 5 x 1 375 63mm x 35mm Text Configurable channel text size Indicators Power status memory Backlight Configurable w auto shut off and contrast adjustment Page 3 MadgeTech PRHTemp2000 ME Start Stop Time Software programmable start time and date up to six mon
10. ED AND OR SERVICES PROVIDED BY SELLER GIVING RISE TO THE CLAIM OR CAUSE OF ACTION SELLER SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY LOSS OF REVENUE LOSS OF PROFITS OR ANY INCIDENTAL INDIRECT SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES WHETHER OR NOT FORESEEABLE NO ACTION REGARDLESS OF FORM ARIS ING OUT OF ANY TRANSACTION GOVERNED BY THESE TERMS AND CONDITIONS MAY BE BROUGHT BY EITHER PARTY MORE THAN TWO 2 YEARS AFTER THE CAUSE OF ACTION HAS ACCRUED The foregoing allocation of risk and limitation of liability has been agreed to by the parties and forms the basis of their willingness to enter into any accepted order 22 Software License A For purposes hereof Software means the computer programs included in the Product at delivery together with all codes techniques software tools formats designs concepts methods and ideas associated with those computer programs The term also includes all copies of any part of the software as well as the manual s and printed materials provided by Seller B Seller grants Buyer a non exclusive non transferable license to use the Software in object code form only according to the terms set forth below Buyer may operate the Software only i in conjunction with and as part of the Product ii in the manner in which it is intended by Seller and iii at Buyer s plant site where the Product is first used Buyer may negotiate with Seller separate licenses to use the Softw
11. EMENT OR ACCURACY ADEQUACY OR COMPLETENESS OF DATA MEASUREMENT WITH RESPECT TO ANY OF THE SELLER MANUFACTURED PRODUCTS CONSUMABLES OR SOFT WARE OR ANY OF THE SELLER PROVIDED SERVICES Any drawings submitted with the Products are only to show the general style arrangement and approximate dimensions of the Products B Equipment Consumables Software and Services Manufactured or Provided by Others SELLER DOES NOT MAKE AND HEREBY DISCLAIMS ANY AND ALL REPRESENTATIONS AND WARRANTIES OF ANY KIND WHATSOEVER WHETHER EXPRESSED IMPLIED OR STATUTORY INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY PAR TICULAR PURPOSE NONINFRINGEMENT OR ACCURACY ADEQUACY OR COMPLETENESS OF DATA MEASUREMENT WITH RESPECT TO ANY EQUIPMENT COMPONENTS PARTS CONSUM ABLES SOFTWARE OR SERVICES SOLD TO BUYER BY SELLER THAT ARE NOT MANUFACTURED OR PROVIDED BY SELLER Seller shall assign the manufacturer s or service provider s warranty applicable to such equipment components parts consumables Software and services to the extent permitted to Buyer Seller will provide Buyer with available warranty information 21 Limitations IN NO EVENT REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION WHETH ER BASED IN CONTRACT INFRINGEMENT NEGLIGENCE STRICT LIABILITY OTHER TORT OR OTHERWISE SHALL SELLER S LIABILITY EXCEED THE PRICE ACTUALLY PAID BY BUYER TO SELLER FOR THE SPECIFIC PRODUCTS CONSUMABLES AND OR SOFTWARE MANUFACTUR
12. ORE displays the second status screen CANCEL returns to main screen OK returns to main screen UP no function DOWN no function 6 5 ID Parameters EE IE FRERFIETEEE SERIAL MO ARAB DEVICE ID PRHT emp PASSWORD Disabled B ID I HORE N EXIT Displays information relating to device identity For all status screens F1 ID no function F3 MORE displays the first status screen F4 EXIT returns to main screen CANCEL returns to main screen OK returns to main screen UP no function DOWN no function 6 6 Statistics Menu Screen H SELECT AN OFTIOM EELO CHAN TYFE If INFO N EXIT Displays options available within the statistics menu F1 CHAN goes to screen that sorts statistics by channel F2 TYPE goes to screen that sorts statistics by type F3 INFO goes to Statistics Information Screen F4 EXIT returns to main screen Page 20 Data Logger Manual CANCEL returns to main screen OK returns to main screen UP no function DOWN no function 6 7 Channel Statistics C T TEMFERATURE ME oe ee H me 1 iS a J Hin ZO o ra se 14 8 5 Displays statistics Maximum recorded value Minimum recorded value and average recorded value based on channel Temperature Humidity or Pressure F1 TEMP Displays temperature statistics F2 HUMID Displays humidity statistics F3 PRESS Displays pressure statistics F4 EXI
13. PRHTemp2000 Data Logger Manual A MADGETECH WE BUILD DATA LOGGERS Table of Contents Section 1 Device Satety si icvcccccccccscecssadecsaiidedshansseccnavecadssedgdadevecensesenceaseaee 3 1 1 Model information ss se ie GR ee nde array 3 1 4 CII ANIONS ae Ee RE EE EE NEE Ee GE ep Ge ORR Ee GE 3 1 5 VAIL IN EY EE O E 5 Section 2 Device Overview esse eee eee eee eee 6 Section 3 Status Indicator Icons sse eee eee 7 l Baterya S oos ee EEDS 7 BE Memory SANUS oe aaie a EG GR SE 7 E RUNNING MAICA TOT ass EE EE GE GE EE ee EG EER 7 SABS EES ad Gie ie AE EE N ER 8 EE lee AE RE ET EE is 8 K SOP ICON AE tea raretetatennesaiat 8 3 5 External Power es ee N EE ER Ge deiari 8 ol SSCL e n ME N N N ek 8 Section 4 Front Panel Overview essere ee eee eee 9 4 1 Changing the display UNITS sesse eee AE ee ee AE ee 9 4 2 Changing the number type and size of channels viewed 9 4 3 Checking the memory status osse ss ede ES SE Ee 10 4 4 Checking power status sesse ER EE DE ee ee EG ed 10 4 5 Changing the Contrast sse eee eee ee Ee 10 Section 5 PRHTemp2000 Function Reference sees eee ee eee eee eee 11 Did Mall SCI COIN ae EE ee ee eit Ge 11 Du 1 eT ena ea E de ie ee ee 12 DS balls tiS MENU serea a E E E ARETE 12 AA EE T N EE REE 13 aa U MEN a EEEE 13 Section 6 PRHTemp2000 Screen Shot Description esse eee eee 18 Gl Main Giel sesse es id N De OE GE Ee N Ge Ee 18 6 2 Status Screens Run Parameters eee ee ss esse see s
14. T returns to Statistics Menu Screen CANCEL returns to Statistics Menu OK returns to Statistics Menu UP no function DOWN no function 6 8 Type Statistics RE AVERAGE VALUE esse d 14 8 RH bf r 14 16s HIH H n Ea LT Displays statistics from all 3 channels Temperature Humidity and Pressure sorted by type maximum recorded value minimum recorded value or average value F1 AVG displays average recorded value for each channel F2 MIN displays minimum recorded value for each channel F3 MAX displays maximum recorded value for each channel Page 21 MadgeTech PRHTemp2000 N F4 EXIT Returns to Statistics Menu CANCEL returns to Statistics Menu OK returns to Statistics Menu UP no function DOWN no function 6 9 Statistics Information Screen a STATISTICS INFORMATION READINGS 41 TEE DATE 2HHAr ii ni START TIME Hos ans ad CLEAR Il ll If EXIT Displays current statistics information including the number of recorded readings start date and start time F1 CLEAR Gives the option to clear all statistics F2 no function F3 no function F4 EXIT returns to Statistics Menu CANCEL returns to Statistics Menu OK returns to Statistics Menu UP no function DOWN no function 6 10 Unit Selection Menu EE UNIT SELECTION TEMPERATURE Die fau lt HUHIDIT Die fau lt PRESSURE Default TEMP HUMID
15. This is done by pressing the F1 key marked by a tab labeled CLEAR Upon pressing this key a confirmation message will appear with function tabs labeled NO and YES corresponding to F1 and F2 respec tively Selecting YES by pressing the F2 key will confirm the statistics clear function Page 12 Data Logger Manual 5 4 Units Pressing the F3 key while viewing the Main Screen will access the Units Selection screen Here the measurement units can be easily changed In the Units Selection screen the F1 F2 and F3 function keys correspond to the three channels temperature humidity and pressure respectively Select ing a channel by pressing its corresponding function key allows the user to change the units by either pressing the function key repeatedly or using the UP and DOWN keys to scroll through the list of available units Selecting ok either by pressing the OK button or the F4 key accepts and confirms the unit selection Pressing the CANCEL key cancels the unit changing action and reverts to the previously selected units The PRHTemp2000 offers most commonly used units 5 5 Setup Menu Pressing the F4 key while in the Main Screen will display the Device Con figuration screen From this menu changes can be made to most of the PRHTemp2000 s display configuration including the screen contrast size of the channel view in the main screen as well as display of the channels Power status can also be viewed including
16. ameter configuration tab is highlighted scrolls through available options 6 16 Power Status Screen TREE FOWER STATUS nnan EATTERY TYFE Lithium EATTERY LIFE JDA EATTERY VOLTAGE S ir U ETERNAL FOWER Absent EXTERMAL VOLTAGE HHH LI L TYFE Il ll HORE If EXIT Displays details about power available to the device including the battery type battery voltage and external voltage F1 TYPE highlights and then changes battery type Lithium or Alkaline F3 MORE moves back to Power Modes screen F4 EXIT Returns to Device Configuration Screen CANCEL Returns to Device Configuration Menu OK moves back to Power Modes screen UP if type parameter configuration tab is highlighted scrolls through avail able options DOWN if type parameter configuration tab is highlighted scrolls through available options 6 17 Device Information Screens Minimum Device Range yO D G al N May Wo CBC If HORE Displays values indicating minimum temperature pressure and humidity detect able by the PRHTemp2000 For all Device Information Screens F1 MIN no function F2 MAX shows Device Range Maximum screen F3 CAL shows Calibration Information screens Page 26 Data Logger Manual F4 MORE shows further Device Information screens CANCEL Returns to Device Configuration Menu OK Returns to Device Configuration Menu UP No function DOWN No function 6 1 Device Information Screens
17. are at other plant sites Buyer s use of Software shall be governed exclusively by Sellers and or an third party owner s applicable license terms C Buyer shall not i make the Software available to any person or entity other than its em ployees who must use the Software only as specified above ii modify the Software or merge it with another program iii reverse engineer disassemble decompile or make any attempt to discover the source code of the Software iv translate or create derivative works based on the Software v remove obscure or alter any notice of the patent copyright or other proprietary rights related to the Software vi sub license sell lend rent or lease any portion of the Soft ware vii copy any portion of the Software viii operate the Software other than in conjunc tion with operation of Product or ix transfer the Software in violation of applicable United States Export laws and regulations Page 36 PO Box 50 e 201 Route 103 West Warner NH 03278 Phone 603 456 2011 e Fax 603 456 2012 www madgetech com e info madgetech com
18. atistics Menu statistics generated from the conditions encoun tered by the device can be viewed in a variety of different styles including being sorted by channel and by type The Statistics Menu also displays important statistics information as well as the option to clear the statistics at any time 5 3 i Viewing statistics by channel Pressing F1 while viewing the Statistics Menu brings up statistics sorted by channel Here the F1 F2 and F3 keys provide the ability to view statistics re garding temperature humidity or pressure respectively Each channel screen displays the minimum maximum and average values encountered by the device for a particular channel 5 3 ii Viewing statistics by type The PRHTemp2000 s Statistics Menu also provides the option to view statis tics by type This can be done by pressing F2 while in the Statistics Menu Here the function keys F1 F2 and F3 correspond to the three different types of statistics average minimum and maximum respectively Each type screen displays the values of temperature humidity and pressure encountered by the device of the particular type 5 3 iii Statistics Information Pressing the F3 key while viewing the Statistics Menu screen brings up Statistics Information This screen displays the number of readings being considered within the statistics readings as well as the date and time the recording period began From this screen the statistics information can also be cleared
19. ay Key anodized aluminum enclosure Down Key Page 6 Data Logger Manual Section 3 Important Status Icons 3 1 Battery Status Bl iLL D Full Empty Battery Battery Battery status icons indicate the state of charge of the batteries When the bat tery empty indicator is displayed the battery should be replaced 3 1 Memory Status Spee WUE Memory Memory Empty Full The memory status icons indicate the amount of memory left for data storage If the PRHTemp2000 is in wraparound mode the memory status icon will indicate empty 3 1 Running Indicator CAPER EH Indicates that the PRHTemp2000 is taking readings The icons cycle periodically Page 7 MadgeTech PRHTemp2000 3 2 Delay Start Indicator The delay start icon indicates that a logging operation is scheduled for the future L 3 3 Wait Icons The wait icons indicate that the device is busy cq 3 4 Stop Icon Indicates that the PRHTemp2000 is not currently taking readings 3 5 External Power Icon Indicates that the PRHTemp2000 is powered by an external source Lajf 3 1 Reset Icon Indicates that the device has been reset Page 8 Data Logger Manual Section 4 Front Panel Overview 4 1 Changing the display units The PRHTemp2000 comes with factory default display units of C for tem perature RH for humidity and PSIA for pressure These units can be easily changed by pressing the F3 button in the main screen
20. d LED status options Page 14 Data Logger Manual ii a Power Modes The power modes screen displays information regarding the display backlight and LED mode as well as the options to change their function Display The PRHTemp2000 s LCD screen display has options to be either on continuously or turn off automatically after 5 minutes of inactivity This option can be changed by first pressing the F1 key to highlight the display parameter configuration tab Once the tab is highlighted the option can be changed by pressing the F1 key repeatedly or using the UP and DOWN keys to select either On or Auto Backlight Like the display the LCD screen s backlight also has power saving options The backlight can be either on continuously off or set to automatically shut off after 30 seconds of inactivity This option can be changed by first pressing the F2 key to highlight the back light parameter configuration tab Once the tab is highlighted the option can be changed by pressing the F2 key repeatedly or using the UP and DOWN keys to select either On Off or Auto LED Modes The function of the two LEDs on the upper left corner of the PRHTemp2000 can be regulated by first pressing the F3 key to highlight the LED parameter configuration tab Once the tab is highlighted the option can be changed by pressing the F3 key repeatedly or using the UP and DOWN keys to select either Enabled meaning the LEDs
21. d due date of next calibration For all Device Information Screens F1 DATE no function F2 TEMP shows temperature calibration information F3 HUMID shows humidity calibration information F4 MORE shows further calibration information screens CANCEL Returns to Device Configuration Menu OK Returns to Device Configuration Menu UP No function DOWN No function Page 28 Data Logger Manual 6 1 Calibration Information Screens Temperature Calibration me TEMIFERATURE CALIERATION GIN 1 99099 0 OFFSET A HERR UMITS ne DATE WiN HUMID HORE Displays calibration information for temperature channel F1 DATE shows calibration date information F2 TEMP no function F3 HUMID shows humidity calibration information F4 MORE shows further calibration information screens CANCEL Returns to Device Configuration Menu OK Returns to Device Configuration Menu UP No function DOWN No function 6 1 Calibration Information Screens Humidity Calibration GAIN 1 AARBEIE OFFSET b AE UNITE AF Fl L DATE TEMP ORE HoOEE Displays calibration information for humidity channel F1 DATE shows calibration date information F2 TEMP shows temperature calibration information F3 HUMID no function F4 MORE shows further calibration information screens CANCEL Returns to Device Configuration Menu OK Returns to Device Configuration Menu UP No function
22. e improper installation modification repair storage or handling or any other cause not the fault of Seller are not covered by this limited warranty and shall be at Buyer s expense Seller shall not be obligated to pay any costs or charges incurred by Buyer or any other party except as may be agreed upon in writing in advance by an authorized representative of Seller All costs of disman tling re installation and freight and the time and expenses of Seller s personnel for site travel and diagnosis under this limited warranty shall be borne by Buyer unless accepted in writing by Seller Seller manufactured Products consumables and Software and Seller provided services repaired replaced or corrected during the applicable warranty period shall be in warranty for the greater of the remainder of the applicable original warranty period or ninety 90 days THE FOREGOING STATES THE SOLE AND EXCLUSIVE WARRANTY AND LIABILITY OF SELLER FOR BREACH OF WARRANTY AND IS IN LIEU OF ALL OTHER REPRESENTATIONS WARRANTIES AND COVENANTS EXPRESSED OR IMPLIED IN REGARD THERETO EXCEPT FOR THE EXPRESS LIMITED WARRANTY SET FORTH IN THIS SECTION SELLER DOES NOT MAKE AND HEREBY DIS CLAIMS ANY AND ALL OTHER REPRESENTATIONS AND WARRANTIES OF ANY KIND WHATSOEVER Page 35 MadgeTech PRHTemp2000 Smm 8 WHETHER EXPRESSED IMPLIED OR STATUTORY INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE NONIN FRING
23. e Maximum or Minimum Device Range screens will display the Device Version screen containing information such as firmware revision number and communications baud rate Values on this screen cannot be modified 5 5 iii e Firmware Version Firmware details can be viewed by pressing the F2 key while viewing the Device Version screens These details include the firmware version number date and time of firmware creation and checksum Page 17 MadgeTech PRHTemp2000 ml Section 6 PRHTemp2000 Screen Shot Descriptions 6 1 Main Screen ore LAST MEASURED VALUES da N 40 90 14 418 STATUS Il STATS N UNITE IL SETUF Displays last measured values F1 STATUS goes to status screens F2 STATS shows statistics menu F3 UNITS goes to unit selection screen F4 SETUP shows device configuration menu CANCEL no function OK no function UP scrolls channel readings only available while using large text DOWN scrolls channel readings only available while using large text 6 2 Status Screens Run Parameters TEER KUM FARARIETERS START DATE Fr Vd START TIME Has 32 5 Se STOF DATE 299 7 16 19 STOF TIME 195 31534 KATE Z seconds STATUS kunnir TRR ATR Displays information about run parameters including date of recording start start date time of recording start start time stop date stop time recording rate and current status For all status screens
24. ee ee ee ee ee ee 18 6 3 Status Screens Memory Saus eee eee eee ee DE Dee ee De ie 19 6 4 Status Screens Time sissies sesde des de ee AE ee Ee 19 6 IE Pell ATIC els aa ss E RR ee saunas eiaene 20 GO SAUSU MENU STEEN ou EE crv OG cise SAAG ED 20 Revised 11 06 07 Page 1 MadgeTech PRHTemp2000 P 6 7 Channel Slats ICSE ee AR rostit iirinn ee N ee 21 CG lype r C are ED Ee GR oe de E 21 6 9 Statistics Information SCHOO ses eN N N ee Ge 22 6 10 Unit Selection Menu sasies esse dese eg ge SE N RE N Ee ke ee 22 6 11 Device Configuration Menu esse eee eee eee eee eee eee ee 23 6 12 Adj st VEE esse ER GE EE DE AG AG EDE die 23 6 13 Display eT sU e ese RE RR N EE ER ee De oe 24 6 14 Power Modes Screen se de Ge ie 25 6 15 Display Update Mode Screen sesse sesse ee ee ee ee 25 6 16 Power Status Scleel sissies DR ee ge E Ke 26 6 17 Device Information Screens Minimum Device Range 26 6 1 Device Information Screens Maximum Device Range 27 6 2 Device Information Screens Device Version sese eee eee eee e 27 6 1 Device Information Screens Firmware Version esse eee esse ee 28 6 1 Calibration Information Screens Calibration Date 28 6 1 Calibration Information Screens Temperature Calibration 29 6 1 Calibration Information Screens Humidity Calibration 29 6 1 Calibration Information Screens Pressure Calibration 30 6 2 Device Reset Screen Hardware Reset cesses 30 6 3
25. es including the display visibility backlight options and LED modes F1 DISPLAY first highlights and then changes display visibility On full vis ibility or Auto shuts off after 5 minutes of inactivity F2 BKLGHT first highlights and then changes backlight options On backlight always on Auto backlight shuts off after 30 sec of inactivity or Off backlight always off F3 LED first highlights and then changes LED mode options F4 MORE moves to Display Update Mode screen CANCEL Returns to Device Configuration Menu OK moves to Display Update Mode screen UP once parameter configuration tab is highlighted scrolls through available options DOWN once parameter configuration tab is highlighted scrolls through available options 6 15 Display Update Mode Screen EL DISPLAY UFDATE NODE HODE Wo TIME 15 seconds B L MODE il TIME l Il MORE Displays information regarding display refresh mode and refresh interval F1 MODE first highlights and then changes update mode Auto screen refreshes periodically or Reading refreshes only after a reading is taken F2 TIME first highlights and then changes refresh interval F4 MORE moves to Power Status screen CANCEL Returns to Device Configuration Menu OK moves to Power Status screen Page 25 MadgeTech PRHTemp2000 mi UP once parameter configuration tab is highlighted scrolls through avail able options DOWN once par
26. ew the Power Status screen including battery power percent remaining and the presence of external power Battery type and battery voltage are also displayed as well as external power voltage if connected Button pressing chain Main Screen gt F4 gt F2 gt F4 gt F4 4 5 Changing the Contrast The PRHTemp2000 s LCD screen contrast values can be changed in two ways One method is outlined in the Function Reference Guide A faster simpler way involves simultaneously pressing the CANCEL and UP or DOWN button in any screen Button pressing chain CANCEL UP to increase or DOWN to decrease Page 10 Data Logger Manual Section 5 PRHTemp2000 Function Reference 5 1 Main Screen The main screen of the PRHTemp2000 features a real time display of most recently measured temperature humidity and pressure data At the bottom of the main screen are tabs corresponding to each of the four function keys These tabs are used to access the four main function menus of the PRH Temp2000 status statistics units and setup The left side of the main screen and all subsequent screens of the device is where important status informa tion icons can be found detailed in Section 3 Important Status Icons page 5 including recording status memory status busy status external power status and battery power status 5 2 Status Menu Pressing F1 on the main screen brings up the Status menu The first screen that appears in the Sta
27. in accordance with the following terms and conditions unless otherwise stated in writing These Terms and Conditions Terms and Conditions govern a all sales quotations and sales of components equipment parts and other products Product from and b all service proposals and provisions of services by Seller to the buyer of the Products Buyer These Terms and Conditions shall take precedence over any terms and conditions which appear on Buyer s order or other form or any other writing or electronic transmission from Buyer Any terms or conditions on any of Buyer s forms recordings electronic transmissions or orders that are different from or in addition to these Terms and Conditions are specifically rejected Any modification to these Terms and Conditions must be agreed to and executed in writing by Seller Seller s failure to object to provisions contained in any communication from Buyer shall not be construed as a waiver of these Terms and Conditions or as an acceptance of any such provision Trade custom trade usage and past performance are superseded by these terms and conditions and shall not be used to interpret these terms and conditions In the event that Prod uct includes software the software is licensed to Buyer in object code form only in accordance with Seller s standard Software License Terms that are included below 20 Limited Warranty A Seller Manufactured Products and Seller Provided Services
28. midity channel Page 23 MadgeTech PRHTemp2000 P F3 PRESS first highlights and then changes the viewing options of the pressure channel F4 MORE moves on to Display Configuration screen CANCEL return to Display Configuration Menu OK moves on to Display Configuration screen UP once channel parameter configuration tab is highlighted scrolls through available options DOWN once channel parameter configuration tab is highlighted scrolls through available options 6 13 Display Configuration Es DIZFLAT CLOMFIGUOFATIOHM CONTRAST E CHANNEL SIZE Medium B Allows the user to change the contrast of the LCD display as well as the channel size F1 CNTRST highlights the contrast parameter configuration tab F2 SIZE highlights and then changes options of the channel size parameter F3 MORE moves back to the Adjust Visibility screen F4 EXIT returns to Display Configuration Menu CANCEL returns to Device Configuration Menu OK moves back to the Adjust Visibility screen UP when contrast parameter configuration tab is highlighted increases contrast value DOWN when contrast parameter configuration tab is highlighted increases decreases contrast value Page 24 Data Logger Manual 6 14 Power Modes creen EET FOWER PODES cscs DISPLAY Auto EACKLIGHT Auta LED Enabled IDTSFLAVITERLGHTIT LED Il MORE Displays information regarding the devices different power mod
29. n 5 5 iii Device Information The F3 key in the Setup Menu displays the Device Information screens Here device identification information can be found including serial number prod uct ID revision and subtype Calibration parameters are also found under device information including the date the device was last calibrated and when it will be due for calibration again Firmware details are also found here 3 iii a Device Range Minimum The Minimum Device Range screen can be accessed by pressing the F1 key while viewing the Device Information screen This display indicates the minimum values which the PRHTemp2000 is capable of detecting and logging Values on this screen cannot be modified 5 5 11 b Device Range Maximum The Maximum Device Range screen can be accessed by pressing the F2 key while viewing the Minimum Device Range screen This display indicates the maximum values which the PRHTemp2000 is capable of detecting and logging Values on this screen cannot be modified 5 iii c Calibration Parameters Pressing F3 while in the Maximum or Minimum Device Range screens will display the device calibration parameters This screen displays information indicating the most recent calibration date as well as the date the next calibration will be due A It is important to keep your device properly calibrated to ensure accurate readings Page 16 Data Logger Manual O 5 5 iii d Device Version Pressing the F4 key while viewing th
30. p Menu and from this menu press the F1 key to enter the Display screen then F4 to scroll to the next screen Here the F2 key will change the size of the channels viewed By pressing F2 repeatedly the size parameter will scroll between 3 sizes Small Up to three channels can be displayed and appear much smaller than the available screen space Medium Up to three channels can be displayed and take up entire available screen space Page 9 MadgeTech PRHTemp2000 P Large Up to two channels can be displayed at a time with the option of us ing the UP and DOWN buttons to scroll to view the third Button pressing chain Main Screen gt F4 gt F1 gt F4 gt F2 repeatedly to scroll 4 3 Checking the memory Status A status icon appears on all screens representing memory but further infor mation including percent memory left and number of readings taken can also be viewed From the Main Screen press the F1 key to enter the Status screens then press F2 to view memory status information Button pressing chain Main Screen gt F1 gt F2 4 4 Checking power status A battery status and external power status if available icon appear on all screens but percent battery power remaining and external power presence as well as battery type current battery voltage and current external volt age can also be viewed From the Main Screen press F4 to view the Device Configuration Menu F2 to access the power options then F4 twice to vi
31. r by pressing the OK button in the Display section the Display Configuration screen can be viewed Here LCD screen contrast values can be set as well as the size the channels are displayed on the Main Screen Contrast To change the LCD screen contrast view while viewing the Display Configuration screen first select the contrast configuration parameter by pressing the F1 key This action will highlight the function tab corresponding to the F1 key Once this tab is highlighted the contrast can be increased or decreased using the UP and DOWN keys Size To change the size that each channel is displayed on the Main Screen view while viewing the Display Configuration screen first select the size configuration parameter by pressing the F2 key This action will highlight the function tab corresponding to the F2 key Once this tab is highlighted the size can be increased or decreased using the UP and DOWN keys Sizes are as follows Small Up to three channels can be displayed and appear much smaller than the available screen space Medium Up to three channels can be displayed and take up entire available screen space Large Up to two channels can be displayed at a time with the option of using the UP and DOWN buttons to scroll to view the third 5 5 ii Power The Power section displays information regarding battery and external power sources as well as giving options including display and backlight status that could potentially save power an
32. specified operating temperature Dispose of the battery in accordance with local regulations See the individual specification sheets at www madgetech com The PRHTemp2000 does not have any user serviceable parts except the battery which should be replaced periodically The battery life is affected by battery type ambient temperature sample rate sensor selection offloads and LCD display usage The PRHTemp2000 has a battery status indicator on the LCD display If the battery indication is low or if the device seems to be inoperable it is recommended that the battery be changed To change the battery locate and remove the four 4 3 32 hex screws on the back of the unit Separate the halves and the battery compartment is now visible Remove the old 9V battery from the battery clips and replace with a new 9V battery MadgeTech recommends using 9V lithium battery An alkaline battery is acceptable but will yield a shorter battery life For any other maintenance or calibration issues MadgeTech recommends the unit be returned to the factory for service Before returning the device you must obtain an RMA from the factory For further information please contact MadgelTech at MadgeTech Inc PO Box 50 201 Route 103 West Warner NH 03278 TEL 603 456 2011 e FAX 603 456 2012 support madgetech com www Madgelech com Page 34 Data Logger Manual Terms and Conditions All products furnished by MadgeTech Inc Seller shall be
33. ths in advance programmable stop time Memory 87 381 readings per channel 262 143 total readings software configurable memory wrap Reading Rate 1 reading every 2 seconds to 1 every 24 hours Calibration Digital calibration through software Calibration Date Automatically recorded within device Battery Type 9V lithium battery included user replaceable optional AC adapter 7 24 VDC Volts 100mA For 230 VAC operation use AC supply T35 9 100 R 3 made by ENG Electric Battery Life 30 days typical 1 min reading rate with continuous LCD and no backlight usage Data Format Date and time stamped C F K R RH mg ml water vapor concentration dew point PSIA inHg mmHg bar atm Torr Pa kPa MPa Time Accuracy 1 minute month at 20 to 30 C Computer Interface PC serial or USB interface cable required 115 200 baud Software Windows 95 98 ME NT 2000 XP based software Operating Environment 20 to 60 C 0 to 95 RH non condensing Dimensions 4 8 x 3 3 x 1 25 122mm x 84mm x 32mm Weight 16 oz 440 g Enclosure Black anodized aluminum Page 4 Data Logger Manual 1 3 Warranty Products manufactured by Madgelech Inc are warranted against defective material and workmanship for a period of one year starting from the date of shipment In the event that a MadgeTech product is found to be defec tive MadgelTech will repair or replace the product at its sole discretion S
34. tus Menu is Run Parameters but the Memory Status and Time screens can also be viewed by pressing the F2 and F3 keys respec tively 5 2 1 Run Parameters The Run Parameters screen displays important information regarding the device s current recording session These parameters include the time and date the recording session started start time and start date the time and date the recording session will end stop date and stop time due to either lack of memory or preprogramming in the MadgeTech software The rate at which the PRHTemp2000 is recording rate is also displayed The device s current status either running or stopped is the last parameter on the Run Parameters screen 5 2 ii Memory Status The Memory Status screen is where all information regarding the PRH Temp2000 s memory This screen displays the percent of memory space currently available memory left the number of readings currently stored on the device readings the maximum number of readings the device can record max readings as well as information about the wrap feature display ing either disabled or the number of wrap readings currently stored in memory Page 11 MadgeTech PRHTemp2000 P 5 2 iii Time The time screen displays current time data including the current time and date time and date of last measured data and current time zone 5 3 Statistics Menu Pressing the F2 key while in the Main Screen brings up the Statistics Menu From the St
35. uch repair or replacement shall be the sole remedy of this warranty This warranty extends only to the original purchasing customer and does not apply to any unit which in our sole judgment has been subjected to a Operating or environmental conditions in excess of our written specifications or recommendations b Damage misuse or neglect c Improper installation repair or alteration This warranty excludes batteries Except as to title this is our only warranty for the products MadgeTech Inc expressly disclaims all other warranties guarantees or remedies wheth er expressed or implied or statutory including any implied warranty of mer chantability or fitness for a particular purpose We also disclaim any implied warranty arising out of trade usage or out of a course dealing or course of performance We do not guarantee the integrity of data or warranty that the products will operate uninterrupted or error free Madgelech data loggers and their associated software have been thor oughly tested and the documentation reviewed However MadgeTech does not warrant the performance of its products or that the products or their associated software will operate as described in this manual Page 5 MadgeTech PRHTemp2000 me Section 2 Device Overview Pressure Sensor Power Jack Temperature and Humidity Sensor Ventilation Holes LED Lights Communication LCD Display Jack Screen Up Key Bleach Ok
36. will light to indicate device function or Disabled meaning the LEDs will never light 5 5 11 b Display Update Mode Selecting MORE by either pressing the F4 key or OK key while viewing the Power Modes screen brings up the Display Update Mode screen On this screen options relating to the refresh rate of the screen are displayed The F1 key toggles between auto and reading modes In auto mode the display is updated periodically whereas in reading mode the display only updates after a reading is taken F2 selects the update period option Pressing the UP and DOWN keys increase and decrease the update period respectively Page 15 MadgeTech PRHTemp2000 me 5 5 ii Power Status Selecting MORE by either pressing the F4 key or the OK key while viewing the Display Update Mode screen brings up the Power Status screen On this screen the battery type is displayed and should be changed by the user based on whether a Lithium or Alkaline battery is used in the PRHTemp2000 This can be changed by first pressing the F1 button to highlight the type parameter configuration tab Once the tab is highlighted the battery type can be changed by either pressing the F1 key repeatedly or by using the UP and DOWN arrows to select the correct battery type The percent battery power remaining external power presence battery voltage and external power voltage are also displayed on the Power Status scree

MadgeTech PRHTemp2000 Data Logger Manual PDF

Contents

Download Pdf Manuals

Related Search

Related Contents