Home

GOVERNMENT OF TAMILNADU

Contents

1. T9 _A full set of Tender Document signed and stamped Tenderer shall print a full set of Tender Document downloaded from the designated Web site or purchased from the TNCSC and the Authorised Signatory shall sign and stamp in all pages of the Tender Document This should be enclosed in the Technical Bid Authorised signature Name of the authorised person Designation Name of Tenderer Stamp of Tenderer 48 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 TO BE FURNISHED IN PART II COVER 1 It is certified that We ccceceeeeeee cece cence ee eee have offered to supply a quantity of cossesseneesscssenen cs Nos of Electric Table Fan in the tender 2 Schedule Of Rates Offered For Electric Table Fan as per IS 555 1979 1 Basic cost 2 Excise duty Tamil Nadu 3 Value Added Tax T N VAT 4 Central Sales Tax C S T 5 Others to be specified Total Cost per Electric Table Fan Note In cases of discrepancy between the cost quoted In words and figures the lower of the two will be Considered SIGNATURE OF THE TENDERER WITH SEAL AND ADDRESS 49 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Vide Check List Question No 9a ANNUAL TURN OVER STATEMENT FOR S
2. Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Name of the Bank Demand Draft DD Number DD Date cml al tas DD Amount Please furnish the sample Electric Table Fan Test Report obtained from the NABL accredited or BIS recognized laboratory Please furnish the details about the sample Electric Table Fans models submitted to TNCSC for reference Name of the Manufacturer Make Model number ON No of samples submitted to TNCSC oO Date of submission Please furnish Authorisation letter Power of Attorney for the Authorised Signatory of the Tender authorised by the Managing Director Board of Directors of the Bidding Company Competent authority of the organisation In case of Bid by Consortium furnish the Power of Attorney for the Authorised Signatories of the Consortium Agreement authorised by the Managing Director Board of Directors of partner Companies authority of the organisation In case of Consortium of Tenderers furnish the original Consortium Agreement as specified in the Tender document signed by all the Authorised Signatories of Consortium partners 45 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013
3. 1979 that would be carried out by the manufacturer at the manufacturer s point and at NABL accredited or BIS recognized laboratory on the random sample s drawn in the presence of TNCSC from the manufactured lot before supply Type Tests will also be carried out as per the terms of the tender SI No Schedule of Test 1 Starting Clause 10 8 2 Fan speed and input Clause 10 9 3 Earthing connection Clause 10 10 4 Leakage current Clause 10 5 5 High voltage Clause 10 6 43 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 22 PROFILE OF THE TENDERER Name of the Company Year of incorporation CON Registered office Address Office Telephone Number Fax Number Contact Person Name Personal Telephone Number Email Address Local office in Tamil Nadu Address Office Telephone Number Fax Number Authorised signatories Name Address Personal Telephone Number Email Address Address for communications under the current Tender Registration Details Permanent Account Number VAT Registration Number CST Registration Number Service Tax Registration Number Banker s Name Address and Account Number 44 65 SIGNATURE OF THE TENDERER
4. Technical bid Part cover received without the test report issued by the testing agency will be summarily rejected and treated as non responsive d The Test Reports submitted by the tenders in the Technical Bid Part I cover will be evaluated by TNCSC as part of Technical evaluation for its compliance with the Technical Specification as specified in the Tender document e All the responsive tenders will be considered for further processing f All manufacturing units are required to possess the basic lab test equipment as listed in the Annexure X List should be enclosed along with the tender This equipments must be located on the factory premises and all items being produced at the factory premises shall be subject to these lab tests The Inspection team shall verify the availability 11 OPENING OF PRICE BID PART II COVER a The date time and venue of opening of Part II cover i e price bid will be intimated separately to the technically qualified tenderers b The price bid will be opened on the intimated date and time in the presence of the tenderers or their authorised representatives who choose to be present c All the Price items as asked in the Tender should be filled in the Price Bid format as given in the Tender d The Price Bid should contain a single price only for the Electric Table Fan irrespective of the number of Electric Table Fan models tested and approved by the Testing Agency If more than one price optio
5. devices required for fixing the bottom cover 2 nos of Brass inserts are required for fixing the Switch Assembly TABLE 1 TECHNICAL SPECIFICATION OF PLASTIC MATERIALS Melt Flow Index Izod Impact Specific at 230 C strength ae ae a Gravity 2 16 kg load Notched g 9 g MO mi kJ m MPa eC Material g 10 min kJ m ASTM ASTM ASTM ASTM D 792 D 1238 D 638 D 648 PP 0 89 0 91 8 0 15 0 Min 30 Min 90 PP 0 89 0 91 9 0 12 0 Min 30 Min 90 PP 0 89 0 91 11 0 14 0 Min 30 Min 90 ABS 1 03 1 07 Oscillation wyione asiar z Oscillation Polyacetal 1 37 1 40 Gear POM Nylon 6 1 14 1 17 42 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 ANNEXURE TO TECHNICAL SPECIFICATION Schedule of test Acceptance test for Electric Table Type Fans and Regulator as per IS 555 1979 to be carried out in NABL accredited or BIS recognized laboratory by the Tenderer and report with one Tested Sample to be furnished along with the tender SI No Schedule of Test 1 Starting Clause 10 8 N Fan speed and input Clause 10 9 ie D gt Leakage current Clause 10 5 Earthing connection Clause 10 10 5 High voltage Clause 10 6 Schedule of test Acceptance test for Electric Table Type Fans and Regulator as per IS 555
6. 6 Should have a valid local Sales Tax registration Value Added Tax registration wherever applicable Central Sales Tax registration Copy of valid Sales Tax CST registration certificate should be enclosed 7 Should have filed the latest I T return and should enclose the copy of the same duly certified by the Auditor TNCSC team will verify the Sales turn over given in Auditor Certificate with the Sales Tax 12 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 department for its correctness If any deviation is found the orders given proposed to be given will be cancelled 8 Should not have been black listed either by TNCSC or by any of the Government Government Undertaking either in India or anywhere in the world 9 Should furnish a self certificate in the format prescribed in Annexure lV on the quality and specification of various components of samples given and product to be supplied with reference to the technical specifications prescribed in the tender 10 Should furnish samples and test reports as specified in Para 10 11 If the provisions at Clause 6 amp 7 are not attracted to any tenderer a self certification to that effect shall be furnished in the tender 5 GENERAL INSTRUCTIONS a The tenderers are requested to go through instructions terms and conditions and specifications given in the tender Failure
7. TNCSC Government would have the right to proceed against such Suppliers Misusing TN Government logo is punishable with criminal liability TNCSC would impose a cash penalty of not less than Rs 5 00 000 Rupees five lakhs only every time such violation is noticed The cash penalty would be in addition to the criminal liability under relevant Act TNCSC would have a right to blacklist such Suppliers from taking part in TNCSC tenders for a minimum period of three years d TNCSC will have the right to black list the Supplier for any breach of tender agreement terms at any point of time 18 FORCE MAJEURE a Force Majeure means an event beyond the control of the Supplier and not involving the Supplier s fault of negligence and not foreseeable Such events may include but are not limited to acts of the nature such as fires floods epidemics etc and other events such as wars or revolutions quarantine restrictions freight embargoes etc b If a Force Majeure situation arises the Supplier shall promptly notify the Purchaser in writing of such conditions and the causes thereof within 7 37 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 days of such event Unless otherwise directed by the Purchaser in writing the Supplier shall continue to perform his obligations under the Contract as far as is reasonably practical and shall seek
8. i The packaging of goods supplied under this contract should be done as per specifications of the tender Each package should contain the item code No Manufacturer s code No To be assigned by the purchaser month and year of manufacture manufacturer s serial number along with four nos 4 Barcode printing of item code No manufacturer s serial number besides other Technical information as specified elsewhere in the tender document Two separate removable stickers containing the item code No manufacturer s code No manufacturer s serial number and barcode printing of the item code No manufacturer code No and manufacturer s serial number should be supplied with each number of the item with one sticker placed in a suitable PVC pouch pasted outside top portion of the carton box 33 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 and another sticker pasted in the warranty manual The barcode sticker will be removed from the PVC pouch during the delivery of the item and affixed in the acknowledgement form The removable sticker would enable the district authorities to submit the distribution details of the item online using the web based software Two bar code stickers should be provided in the Carton as well as in the product This will enable the authorities to monitor the after sales service Detailed instructions regarding
9. if any found in our response shall not be given effect to We undertake if our Bid is accepted to adhere to the scope of work as specified in the Tender or such modified plan as may subsequently be agreed mutually 59 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 29251 2013 We agree to unconditionally accept all the terms and conditions set out in the Tender document and also agree to abide by this Bid response for a period as mentioned in the Tender from the date fixed for bid opening and it shall remain binding upon us with full force and virtue until within this period a formal contract is prepared and executed this Bid response together with your written acceptance thereof in your notification of award shall constitute a binding contract between us and TNCSC We affirm that the information contained in the Technical Bid or any part thereof including its exhibits schedules and other documents and instruments delivered or to be delivered to TNCSC is true accurate and complete This proposal includes all information necessary to ensure that the statements therein do not in whole or in part mislead TNCSC as to any material fact We agree that TNCSC is not bound to accept the lowest or any Bid you may receive We also agree that you reserve the right in absolute sense to reject all or any of the products service specified in the bid respon
10. similar goods However the Supplier shall continue the performance of the contract to the extent not terminated c In the event of supplier not being able to complete atleast 50 of the quantity allotted and ordered to them in time as per the requirement of any spell the balance unsupplied quantity shall be cancelled and the same reallotted to the existing suppliers d The security deposit will be forfeited if a tenderer withdraws the tender during the period of tender validity specified in the tender or if the tenderer fails to sign the agreement Further the security deposit will be 38 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 forfeited for any non adherence of the tender conditions and for the non supply of ordered quantity either in full or in part thereof 19 2 Termination for Insolvency The Purchaser may at any time terminate the Contract by giving written notice with a notice period of 7 days to the Supplier if the Supplier becomes bankrupt or otherwise insolvent In this event termination will be without compensation to the Supplier provided that such termination will not prejudice or affect any right of action or remedy that has accrued or will accrue thereafter to the Purchaser 19 3 Termination for Convenience The Purchaser may by written notice with a notice period of 15 days sent to the Supplier may te
11. 1 30 mm Centre distance between the wire shall not exceed 10 mm Suitable reinforcing cross wires shall be provided b Lifting handle made out of Mild Steel galvanized powder coated wire of not less than 3 mm diameter width 120 mm minimum securely welded at the back side guard to withstand atleast 6 kg load to handle conveniently c All the parts shall be fitted in such a way that the final product is statically and dynamically balanced d Four numbers of rubber bushes should be provided at the base for secured mounting e The product shall be strictly jerk free with smooth oscillation and noise free running 15 Base Arm and Motor Made up of virgin high impact cover strength Polypropylene of minimum 2 0 mm thick All metal parts should be fully covered without any projection at the outer surface 16 Class of protection Class 1 Class 2 protection against a Against electric shock electric shock 2 pin plug with class 2 b Against dust and protection as per IS 555 1979 moisture for enclosure of IP 21 and IP 22 as per IS 4691 motor and regulator 1968 17 Colour At the time of execution of order a Protective guard Lifting handle White powder coated b Blade Translucent amp Blue tinged Centre hub white c Motor cover oscillating switch knob White d Arm White e Base Blue f Switch knob Blue white g Bottom bush Black 18 Name plate details 1 Rated voltage 2 Wattage 3 Size of fan 4
12. 2 Please include statement that all partners of the consortium shall be liable jointly and severally for the execution of the contract in accordance with the contract terms 3 Please include precisely the role and responsibilities of each partner of the consortium in respect of the contract Please include statement authorising the Prime Bidder by the Consortium partners to act on their behalf to incur liabilities to receive instructions for and on behalf of all partners of the consortium to execute entire contract and to receive payment T7 _ Compliance with Eligibility Criteria Tenderers should furnish supporting documents to establish their Eligibility in the Technical Bid Description Bidder Prime Consortium Consortium Bidder partner 1 partner 2 Name of the Bidders 1 Details about Incorporation a Incorporation date b Nature of business incorporated c Whether Certificate of Incorporation enclosed d Notarised English translation enclosed gt A a Date of commencement of Electric Table Fan production b Name of the Tax Authority Statutory Authority issued the certificate document c Whether certificate document enclosed d Whether Notarised English translation 46 65 SIGNATURE OF THE TENDERER 3 Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 292
13. 500V DC 100 MO 5 Digital Stop watch t1 Digitizing Power meter 300V 0 to 5A 0 5 FS a ase mo Digital Stop watch t1 Power meter 300V 0 to 5 A 0 5 FS Stroboscope 2000 RPM 1 7 Fan Speed amp Input 10 9 Output Voltage 200 to 250 Variable frequency Equipment vollage tadiusiable Output frequency 47 53 Hz adjustable 8 Earthing 10 10 Protection against As per figure1 amp 2 of 2 electric shock ToN standard Test Inger IS 302 1 1979 Py Temp 40 5 C 10 Moisture resistance 10 12 Bilal Chamber R H Not less than 90 5 Insulation Tester 500V DC 100M Ohm 5 Mechanical 11 endurance for 10 13 Digitizing Power meter 300V 0 to 5A 0 5 FS regulators only Cord anchorage apparatus BS bel Clea Ole DESNE 12 Cord gri 10 14 101979 sone i Digital Vernier Caliper t1 Weights 11 Kgs 13 Orappaga distance 10 16 Digital Vernier Caliper t1 and clearances Note Variation in range of parameters amp accuracy may also be permitted subject to not less than the requirement of tests as per IS specification 64 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 FOR PARA 14 8 ILLUSTRATIVE MODEL OF ELECTRIC TABLE FAN Base Oval shape E E Length 285mm 240 width 240mm Circumfrence 840mm All dimensions are in mm Leg height 145mm Not to scale Base rib height 15mm Allowable
14. Activities during supply and commissioning of ordered items i Schedule of supply Delivery 15 1 Pre despatch Inspection 31 15 2 Inscription of Government of Tamil Nadu emblem 32 15 3 Electric Table Fan Serial Number 32 15 4 Packing and Storage 32 A Packing list 32 B Packing 33 C Packaging and online monitoring 33 15 5 Schedule of Supply 34 15 6 Status Report 35 15 7 Spares and Services 35 16 Payment terms 36 17 Penalty clause 37 18 Force Majeure 37 19 Termination of contract 38 19 1 Termination for Default 38 19 2 Termination for Insolvency 39 19 3 Termination for Convenience ii 20 Jurisdiction 39 21 Technical specifications 40 3 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 22 Profile of the tenderer 44 T1 Profile of the Tenderer s 44 T2 EMD Amount 45 T3 Sample Electric Table Fan Test Report 45 T4 Submission of Sample Electric Table Fan to TNCSC 45 T5 Authorisation letter Power of Attorney 45 T6 Consortium Agreement 45 T7 Compliance with Eligibility Criteria 46 T8 Existing Service Centres in Tamil Nadu if any 48 T9 A full set of Tender Document signed and stamped 48 Price offer 49 Annexure 1 A For check list question No 9 50 Annexure I B For check list quest
15. No 1 amp 2 4 120 days from the date of Letter Not less than 30 of the ordered quantity of Acceptance including the quantity in SI No 1 2 amp 3 5 150 days from the date of Letter Not less than 30 of the ordered quantity of Acceptance including the quantity in SI No 1 2 3 amp 4 Note The time taken for completion of type test has also been taken into account for fixing the period of the spell 34 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 29251 2013 15 6 Status Report The successful tenderer shall send status report on delivery in the format to be prescribed in such intervals as may be required by TNCSC from time to time till the execution of the entire order 15 7 Spares and Services a Atleast 1 of item supplied against the ordered quantity should be kept as spare at the service centres till the completion of the warranty period b The Supplier shall undertake to supply spares at free of cost and provide the repair and maintenance services of the supplied items during the warranty period of 2 years c A leaflet containing the details of the service centers responsible to attend the installation warranty services at each geographical area name and designation of the contact persons and centre in charge and supervisor in charge who is responsible to oversee the service centers person to whom complaints can be made in ca
16. S ccecececeeeeeeeeeeeeeeeeeeeeaeeeees 1 2009 2010 2 2010 2011 3 2011 2012 4 2012 2013 Total Turnover for 3 years Average Turnover per year Note If 2012 13 is chosen for this purpose then the preceding two years i e 2010 11 and 2011 12 shall be accounted as the years for which turnover statement is to be submitted Lead Prime member Second member Third member Auditor with Registration No SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Vide Check List Question No 12 DATE CERTIFICATE Certified thal aenn ae enir the firm company or its partners share holders had not been blacklisted by Tamil Nadu Civil Supplies Corporation or by any Government Undertaking or by any Government or anywhere in the World SIGNATURE OF THE TENDERER WITH SEAL AND ADDRESS 52 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Vide Check List Question No 13 DECLARATION FORM re NAVE Ouf naasa Office At and declare that I we have carefully read all the conditions of tender sent to me us by the Managing Director Tamil Nadu Civil Supplies Corporation Chennai for the tenders floated by him vide tender Ref No Spl Prog 16 29251 2013 fo
17. Type of fan 5 Class of insulation 6 Class of protection 55 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 7 SI Number 19 Dimensions The drawing for overall dimension and shape is given in annexure XI The shape is indicative The tenderer may offer their own models which generally conform to the shape indicated However the purchaser reserves the right to arrive ata common uniform design and shape with required changes and direct the suppliers to effect supply as per the common uniform design chosen 20 Nett Weight Not less than 3 kg 21 Packing condition In fully assembled ready to use condition Packing material such as Thermocol or any other scientifically approved material shall be used to avoid damage during transit Damage during transit is at manufacturer s cost 22 Instruction manual To be provided with details of 1 Do s and Don ts 2 Operating and cleaning procedure 23 Sample to be tested at Any NABL accredited or BIS recognized laboratory in India 24 Third party test Certification as per the prescribed requirements The testing requirements in the schedule of test indicated below shall be carried out in any NABL accredited or BIS recognized laboratory in India and a valid test report shall be furnished 25 S
18. all reasonable alternative means for performance of the contract c In the event of Force Majeure the delivery period will be extended for a period equivalent to the period for which Force Majeure event was in existence For this period the Supplier shall not be liable to pay penalty d However the price quoted by the bidder and accepted by the Purchaser shall remain firm during such extended period For the matter of Clarity Force Majeure shall not have any bearing on the price 19 TERMINATION OF CONTRACT 19 1 TERMINATION FOR DEFAULT a The Purchaser may without prejudice to any other remedy for breach of contract by written notice of default with a notice period of 15 days sent to the Supplier terminate the contract in whole or part i if the Supplier fails to deliver any or all of the goods within the time period s specified in the Contract or within any extension thereof granted by the purchaser or ii if the Supplier fails to perform any of the obligation s under the contract or iii if the Supplier in the judgment of the Purchaser has engaged in fraudulent and corrupt practices in competing for or in executing the contract b In the event the Purchaser terminates the contract in whole or in part the Purchaser may procure upon such terms and in such manner as it deems appropriate the goods and services similar to those delivered and the Supplier shall be liable to the Purchaser for any additional costs for such
19. are in compliance with the tender specifications and pass all test parameters laid down in the tender is enclosed 6 Whether the Type Tests Reports and Test Report for Plastic material as per table are enclosed 7 Whether earnest money deposit for Rs 7 00 000 Rupees seven lakhs only in the form of demand draft drawn on a Nationalised Bank Scheduled Bank in favour of TNCSC payable at Chennai is enclosed 8 Whether duly attested Photostat copy of the certificate of registration under VAT CST is enclosed If it is not applicable to any tenderer a self certification to that effect should be furnished refer clause 11 under qualification criteria 9 a Whether audited balance sheet duly certified indicating the annual turnover as per Annexure A I B is enclosed b Whether Bankers certificate for minimum cash credit facility is enclosed 7 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 10 Whether Photostat copy of the latest income tax return duly signed by the auditor is enclosed If it is not applicable to any tenderer a self certification to that effect should be furnished refer clause 11 under qualification criteria 11 Whether documentary evidence in support of production capacity is enclosed 12 Whether certificate for not having been black list
20. commissioning certificate based on this test Payments would be effected based on this delivery and commissioning certificate The format for the Invoice Acknowledgement and commissioning certificate would be communicated later and shall be strictly adhered to c In the event of failure of sample in the type test or other test specified in the tender document and the batch has already been dispatched from the manufacturing unit the payment of the batch size of 5000 Nos from which the sample was drawn shall be withheld until it is clear that no other pieces have been found to have failed at the customers end However if the entire batch has not been despatched from the manufacturing location on receipt of the type test report the product shall be disassembled at the factory site and checked separately for the part that failed in the type test d In addition to the above the TNCSC reserve the right to conduct the Type Tests as per IS specifications or tests for safety requirements and performance requirement as per relevant Indian Standard Specifications on random sample from the supply lot in any of the NABL Accredited or BIS recognized laboratory In the event of failure of the sample in the Type Tests or other tests specified above the whole lot will be rejected and the entire lot should be replaced by the Supplier at his risk and cost The testing charges should be borne by the Supplier If they do not pay testing charges it will be reco
21. indicated However the purchaser reserves the right to arrive at a common uniform design and shape with required changes and direct the suppliers to effect supply as per the common uniform design chosen Not less than 3 kg In fully assembled ready to use condition Packing material such as Thermocol or any other scientifically approved material shall be used to avoid damage during transit Damage during transit is at manufacturer s cost 41 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Instruction manual To be provided with details of 1 Do s and Don ts 2 Operating and cleaning procedure Sample to be tested at Any NABL accredited or BIS recognized laboratory in India Third party test Certification as per The testing requirements in the schedule of test the prescribed requirements indicated below shall be carried out in any NABL accredited or BIS recognized laboratory in India and a valid test report shall be furnished Specifications for plastic materials to Specifications for plastics material as per TABLE 1 be used in various parts and test certificates shall be produced from any NABL accreditated or BIS recognized laboratory for ensuring the quality Assembling of two parts by fastening Brass insert with screw to avoid undue risk of wherever required Clamping working loose Minimum 4 nos of Brass inserts are
22. mm Suitable reinforcing cross wires shall be provided b Lifting handle made out of Mild Steel galvanized powder coated wire of not less than 3 mm diameter width 120 mm minimum securely welded at the back side guard to withstand atleast 6 kg load to handle conveniently c All the parts shall be fitted in such a way that the final product is statically and dynamically balanced d Four numbers of rubber bushes should be provided at the base for secured mounting e The product shall be strictly jerk free with smooth oscillation and noise free running Made up of virgin high impact strength Polypropylene of minimum 2 0 mm thick All metal parts should be fully covered without any projection at the outer surface Class 1 Class 2 protection against electric shock 2 pin plug with class 2 protection as per IS 555 1979 IP 21 and IP 22 as per IS 4691 1968 At the time of execution of order a Protective guard Lifting handle White powder coated b Blade Translucent amp Blue tinged Centre hub white c Motor cover oscillating switch knob White d Arm White e Base Blue f Switch knob Blue white g Bottom bush Black 1 Rated voltage 2 Wattage 3 Size of fan 4 Type of fan 5 Class of insulation 6 Class of protection 7 SI Number The drawing for overall dimension and shape is given in annexure XI The shape is indicative The tenderer may offer their own models which generally conform to the shape
23. this aspect would be issued to the successful tenderer s after the tender is finalised ii The Supplier shall furnish the service centre details in each carton to enable the beneficiaries to contact the appropriate service centre in case of necessities in addition to toll free telephone number if any established available for this purpose iii The software has provision for online filing of dispatches and delivery details by the Suppliers The successful bidder shall send status report on delivery in the format to be prescribed in such intervals as may be required by the TNCSC from time to time till the execution of the entire order TNCSC will make arrangements and host an interactive website to enable the Supplier to file the delivery notes including the scanned images of the delivery notes online Payments would be processed based on the online delivery notes 15 5 Schedule of supply The successful tenderers who have agreed to supply as per the rate contract shall commence the supply within 60 days and deliver the Electric Table Fan as per the supply schedule as given below 1 30 days irom Iheuaig oi eter Not less than 5 of the ordered quantity of Acceptance 2 60 days from the date of Letter Not less than 10 of the ordered quantity of Acceptance including the quantity in SI No 1 3 90 days from the date of Letter Not less than 25 of the ordered quantity of Acceptance including the quantity in SI
24. 3 Amendments to the tender a TNCSC may amend the tender wherever it is felt that such an amendment is absolutely necessary b Amendment to tender may also be given in response to Clarifications by prospective tenderers and it is solely at the discretion of 14 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 TNCSC Any amendment to the tender will be uploaded in the website and made available and it is the responsibility of the tenderer to verify the amendments if any and get the amendment documents before the submission of the tender provided no such change could be effected 48 hours prior to the time fixed for opening of the tender c TNCSC at its discretion may or may not extend the due date and time for the submission of tender on account of amendments 5 4 Language of the Tender The tender prepared by the tenderer as well as all correspondence and documents relating to the tender shall be in English language only In case any document is in other language a copy of English translation shall be provided with the tender The supporting documents and printed literature furnished by the tenderer may be in another language provided they are accompanied by an accurate translation in English language in which case for purposes of interpretation of the tender the English translation shall govern The Tenders received without such Eng
25. 5 1 2013 Description Details about Annual Turnover Year 2012 13 Bidder Prime Consortium Consortium Bidder partner 1 partner 2 Year 2011 12 Year 2010 11 Year 2009 10 Whether Annual Report Tax Auditor Report Balance Sheet Profit and Loss Accounts enclosed 4 Whether notarised English Translation enclosed Details about Electric Table Fan Manufacturing capacity a Address of the Electric Table Fan manufacturing plant b What is the installed capacity of Electric Table Fan manufacturing per year c Whether certificate documents enclosed for proof of manufacturing capacity d Name of the Statutory Authority who issued the above certificate document e Whether notarised English Translation enclosed Details about Electric Table Fan sales a No of Electric Table Fan sold b Year of sales c What is the proof document for the sales enclosed 47 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Description Bidder Prime Consortium Consortium Bidder partner 1 partner 2 d Whether notarised English translation enclosed T8 Existing Service Centres in Tamil Nadu if any District Assembly Constituency Name address phone no of service centres
26. 6 Service value Minimum 1 08 cubic m min W 7 Speed To be declared by the manufacturer 8 Type of fan Oscillating a Angular movement not less than 60 b No of oscillations not less than 4 per minute at full speed Capacitor type 9 Blades Well balanced 3 blades moulded as single piece made up of chemical and heat resistant virgin high impact strength translucent and blue tinged polypropylene material 10 Class of insulation Class B Copper wire winding winding Insulation materials a Between coil amp stamping slots and separator between running coil amp starting coil Polyethylene terephthalate PET film b Sleeves used for joints Braided glass fiber c Lock sticks Glass Epoxy laminate nylon 66 PET 54 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 11 Motor frame Cast Aluminium with ventilation 12 Power cord Moulded type plug with power cord of minimum 2 meter long from the point where it comes out PVC insulated sheathed copper cable cross sectional area not less than 0 5 sq mm 13 Capacitors As per IS 1709 1984 Amendment No 1 1986 Amendment No 2 1989 14 Other a Protective guard made up of Mild provisions Steel wire duly machine welded and powder coated Nominal diameter of the wires of guard not less than
27. Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 GOVERNMENT OF TAMILNADU COMPETITIVE RE TENDER FOR THE SUPPLY OF ELECTRIC TABLE FANS RATE CONTRACT FOR THE SUPPLY AND COMMISSIONING OF 34 46 000 PIECES OF ELECTRIC TABLE FAN AS PER IS 555 1979 2013 2014 NOT TRANSFERABLE TENDER REF NO Spl Prog 16 29251 2013 ADVERTISED ON 06 08 2013 SL NO ISSUED TO CASH RECEIPT NO DATE for T N C S C Cost of Tender Form Rs 2000 VAT 5 Rs 2100 TAMILNADU CIVIL SUPPLIES CORPORATION HEAD OFFICE NO 12 THAMBUSAMY ROAD KILPAUK CHENNAI 600 010 1 65 Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 1 Preamble of tender 5 2 Check list 7 2 a Part I Cover Technical Bid 7 2 b Part II Cover Price Bid 9 Tender Notice 10 Qualification criteria 11 4 1 Tenderer 11 4 2 Turnover 11 4 3 Manufacturing Capacity 12 4 4 Minimum Quantity 12 5 General Instructions 13 5 1 Pre Bid Meeting 14 5 2 Clarifications on the Tender 14 5 3 Amendments to the Tender 14 5 4 Language of the Tender 15 5 5 Consortium 15 5 6 Tender form not transferable 16 5 6 Downloaded tender form 16 6 Cost of tendering 17 Earn
28. INGLE BIDDER The annual turn over Of M S fOr the past three years are given below and certified that the statement is true and correct 2009 2010 2010 2011 2011 2012 2012 2013 Total Turnover for 3 years Average Turnover per year AWN Note f 2012 13 is chosen for the purpose then the preceding Two years i e 2010 11 and 2011 12 shall be accounted as the years for which turnover statement is to be submitted Date Seal SIGNATURE OF THE TENDERER SIGNATURE OF THE AUDITOR WITH SEAL AND ADDRESS CHARTERED ACCOUNTANT NAME IN CAPITAL WITH REGISTRATION NUMBER 50 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Vide check list question No 9a ANNUAL TURNOVER STATEMENT FOR CONSORTIUM BIDDER The annual turnover statement of consortium bidders is certified as follows for the following years a Lead Prime member WS cucocsciscrtincacancdoneavcay canis Meee iaaaaees deen 1 2009 2010 2 2010 2011 3 2011 2012 4 2012 2013 Total Turnover for 3 years Average Turnover per year b Second member of consortium M S 0 ececeeeeeec ee eeeee eae eeeeeeeeeeees 1 2009 2010 2 2010 2011 3 2011 2012 4 2012 2013 Total Turnover for 3 years Average Turnover per year c Third Member of consortium M
29. R AWARD OF CONTRACT PAYMENT OF SECURITY DEPOSIT AND EXECUTION OF AGREEMENT 14 1 Acceptance of the tender a The final acceptance of the Tender is entirely vested with TNCSC who reserves the right to accept or reject any or all of the Tenders in full or in part The Tender Accepting Authority may also reject any Tender for reasons such as changes in the scope of procurement new technologies court orders accidents or calamities and other unforeseen circumstances b After acceptance of the tender by TNCSC the tenderer shall have no right to withdraw his tender or claim higher price The tender accepting authority may also reject all the tenders for reasons such as changes in the scope of procurement new technologies lack of anticipated financial resources court orders accidents or calamities and other unforeseen circumstances 14 2 Letter of acceptance a After acceptance of the tender TNCSC will issue letter of acceptance LOA only to the successful tenderer s b Letter of Acceptance will be issued for the entire quantity allotted with spell wise requirement and with instructions to remit the S D and execute agreement for the entire quantity pending issue of firm Purchase Order c However firm purchase order shall be given to the suppliers initially for the first spell allotment which will then be followed by the subsequent purchase orders for subsequent spells only after an inspection has been made on the capacity as
30. acturing process production and dispatch of the material They shall cross check the source of receipt of all the raw material also This would be in addition to the third party inspection c TNCSC and CIPET shall bear the cost of third party inspection for only one manufacturing assembling plant of the supplier If a supplier wants to produce assemble in more than one location then the cost of positioning the inspection team in the second and subsequent plants by TNCSC and CIPET would be borne by the supplier at their cost based on the statement of costs drawn by TNCSC and CIPET d In the event of production assembly of the product being done in a foreign country all quality control arrangements done by CIPET and TNCSC shall be carried out as in manufacturers located in India However the cost of such deployment of personnel and related expenses inclusive of accommodation travel other incidental expenses etc shall be borne by CIPET and TNCSC and the cost reimbursed by the manufacturer The expenses incurred by CIPET and TNCSC shall be deducted at every stage that a bill of payment is being considered 31 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 15 2 Inscription of Government of Tamil Nadu emblem a The Electric Table Fan supplied under this tender shall not contain any of the company label logo brand name etc But th
31. arantee served on the Bank before 31 12 2014 months from the date of Bank Guarantee AND WHEREAS it has been stipulated by you in the said ORDER that the Supplier shall furnish you with a Bank Guarantee by a Scheduled Nationalised Bank for the sum specified therein as security for compliance with the Supplier s performance obligations for a period in accordance with the contract 62 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 AND WHEREAS we have agreed to give the Supplier a Guarantee THEREFORE we Bankers address hereby affirm that we are Guarantors and responsible to you on behalf of the Supplier up to a total of Rs Rupees Only and we undertake unconditionally to pay you upon your first written demand declaring the Supplier to be in default under the contract and without any demur cavil or argument any sum or sums within the limit of Rs Rupees Only as aforesaid without your needing to prove or show grounds or reasons for your demand or the sum specified therein We will pay the guaranteed amount notwithstanding any objection or dispute whatsoever raised by the supplier This Guarantee is valid until ___ months from the date of Bank Guarantee Notwithstanding anything contained herein Our liability under this guarantee shall not exceed Rs Rupees only This Bank Guarantee shall be vali
32. bmitted b The tenderer should have a minimum cash credit facility of Rs 3 crores exclusively for this work duly certified by the Banker 3 a Manufacturing Capacity The tenderer should have Annual manufacturing capacity of atleast 2 00 000 Nos of the tendered item In case of consortium bidder this criteria may be satisfied by all the members jointly b Should possess a minimum plant and machinery and laboratory equipments at their manufacturing units for manufacture and for conducting the Tests specified in the tender document and the Type Tests prescribed in the IS 555 1979 for their annual manufacturing capacity c For companies who have been unable to supply due to shortfall in production capacity and consequently the orders were cancelled proportionately either in the first phase or second phase the total manufacturing capacity of that bidder shall be restricted to the quantity that was supplied within the year of the first phase or second phase whichever is lesser quantity 4 Minimum Quantity The tenderer should offer not less than 1 00 000 Nos of the tendered item The tenderer who quoted for the quantity less than 1 00 000 Nos will be treated as non responsive 5 The tenderer should have supplied atleast 1 00 000 units of fans including table pedestal wall mounted and ceiling fans in any one of the last 3 years Supporting document such as Purchase order copy invoices shall be furnished for the above in the tender
33. claimed by the tenderer and the completion of the supply of the quantity allotted for each spell in the event of those who supplied earlier claiming a larger capacity the premises shall be inspected again 26 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 d The delivery period will be counted from the date of issue of the Letter of Acceptance or as stated in the supply schedule which will be decided at the time of issue of supply order e A successful tenderer shall not ordinarily be allotted a quantity more than the manufacturing capacity assessed by the Inspection Team 14 3 Payment of security deposit SD a The successful tenderers will be required to furnish security deposit equivalent to 2 two percent of the purchase order value inclusive of earnest money deposit amount either in the form of demand draft obtained from any of the nationalised bank scheduled bank drawn in favour of Tamil Nadu Civil Supplies Corporation payable at Chennai or in the form of unconditional irrevocable bank guarantee valid till 31 12 2014 within one week from the date of receipt of letter of acceptance b The security deposit will be released to the successful tenderer after completion of the entire supply The security deposit held by TNCSC till it is released to the successful tenderer will not earn any interest thereof c The security d
34. covering letter is duly signed by the tender as in Annexure VII is enclosed 8 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 b PART II COVER PRICE BID Whether covering letter as prescribed duly signed by the tenderer is enclosed Whether price tender duly signed is enclosed Whether corrections if any in the rates quoted have been duly attested 9 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 3 TENDER NOTICE TAMIL NADU CIVIL SUPPLIES CORPORATION HEAD OFFICE No 12 THAMBUSAMY ROAD KILPAUK CHENNAI 10 TENDER NOTIFICATION FOR THE SUPPLY OF ELECTRIC TABLE FAN The Managing Director Tamil Nadu Civil Supplies Corporation Chennai invites sealed tenders in two cover system under rate contract for supply of the Electric Table Fan as per specifications given in the tender schedule for delivery at the designated locations in the State of Tamil Nadu for the year 2013 14 Spl prog 16 29251 13 Electric Table Fan 34 46 000 Electric Table Fan 7 00 000 12 08 2013 23 08 2013 23 08 2013 At 3 00 PM Up to 12 00 Noon At 2 00 P M Detailed specifications and terms amp conditions are indicated in the tender document The t
35. d English c Do s and Don ts instructions leaflet in Tamil and English 32 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 d A brochure containing details of call centres telephone numbers shall be placed along with the warranty card B Packing a Accepted items after inspection should be stuck with Quality Control passed slip b Individual items should be packed in polythene pouches of appropriate size in conformity with G O c The Electric Table Fan should be packed as per the packaging standard All other items should be individually packed and put inside the box The packing should be in 150 gsm 5 ply corrugated boxes with sufficient thermacole or any other scientifically approved material shall be used to avoid damage during transit Damage during transit is at manufacturer s cost d The Government emblem picture and wordings as prescribed should be prominently printed on the outer cover of the carton used for packing as indicated in the purchase order e The cartons should be sealed and preserved in the stores f The manufacture s serial number should be prominently displayed on the cartons g Each carton should contain the supplier code serial number month and year of manufacturing along with provision for noting the details of beneficiary and the date of delivery c Packaging and online monitoring
36. d up to __ months from the date of Bank Guarantee and we are liable to pay the guaranteed amount or any part thereof under this Bank Guarantee only and only if you serve upon us a written claim or demand on or before In witness whereof the Bank through its authorised Officer has set its hand and stamp on this 2c Jase ered eee at Witness Signature Name in Block Letters 63 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 THE LIST OF MACHINERIES TESTING EQUIPMENTS ALONG WITH VALID CALIBRATION CERTIFICATE REQUIRED TO BE PROVIDED BY THE TENDERER AT THE MANUFACTURING UNIT Electrical Table Fans IS 555 1979 Range amp Accuracy SI Name of the test Clause Equipments required Required Chamber as per IS 555 1979 Anemometer as per IS 555 1979 Digital Stop watch t1 1 Air Delivery 10 3 Output Voltage 200 to 250 Voltage adjustable Variable frequency Equipment Output frequency 47 53 Hz adjustable Digital multimeter THY ON EO DEES g 1000 Ohms 1 2 Temperature rise 10 4 Digital thermometer ere Digital Stop watch 1 af 3 1mV to 10V 0 5 FS 3 Leakage Current 10 5 Digital multimeter 1000 Ohms 1 H V Tester 4000 V 500 VA r Pigh voltage we Digital Stop watch 1 i SSG ARCS RIA eS 10 7 Insulation Tester
37. e made up of chemical and heat resistant virgin high impact strength translucent and blue tinged polypropylene material 0 Class of insulation winding Class B Copper wire winding Insulation materials a Between coil amp stamping slots and separator between running coil amp starting coil Polyethylene terephthalate PET film b Sleeves used for joints Braided glass fiber c Lock sticks Glass Epoxy laminate nylon 66 PET Motor frame Cast Aluminium with ventilation Power cord Moulded type plug with power cord of minimum 2 meter long from the point where it comes out PVC insulated sheathed copper cable cross sectional area not less than 0 5 sq mm o Capacitors As per IS 1709 1984 Amendment No 1 1986 Amendment No 2 1989 40 65 SIGNATURE OF THE TENDERER Sz 0p 7 oO N O i k a s 0 t P N Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 29251 2013 Other provisions Base Arm and Motor cover Class of protection a Against electric shock b Against dust and moisture for enclosure of motor and regulator Colour Name plate details Dimensions Nett Weight Packing condition a Protective guard made up of Mild Steel wire duly machine welded and powder coated Nominal diameter of the wires of guard not less than 1 30 mm Centre distance between the wire shall not exceed 10
38. e centre means the centre or place wherein the tenderer inter alia undertakes and performs the service activities relating to the Electric Table Fan in the tender and shall include a Direct Service Centre or Authorised Service Centre Authorised Service Centre Authorised Service Centre means a service Centre run by the tenderer through another party by entering into a valid commercial agreement Call Centre Call Centre means the centre or the place wherein the tenderer shall make arrangements to _ receive complaints service calls from the customer TNCSC Government Nominated Agency Cost Cost means the total cost to be incurred by the purchaser towards the purchase of Electric Table Fan and also charges to be incurred by the purchaser towards maintenance of Electric Table Fan during warranty period of two years Purchaser Purchaser means the TNCSC who on behalf of the Government of Tamil Nadu is making this procurement through this tender 10 Commissioning Commissioning means ensuring the functioning of each and every Electric Table Fan at the user point by the Supplier in the presence of the officials authorised by TNCSC Government Nominated Agency 11 Delivery point Delivery point means designated locations at Assembly constituencies in the State of Tamil Nadu 12 TNCSC TNCSC means Tamil Nadu Civil Supplies Corporation 13 Rate contract Rate contract mean
39. e emblem of the Tamil Nadu Government shall be done by hot stamping in an indelible manner on the Electric Table Fan with picture and words if any that may be specified along with the locations as mentioned in the purchase order b Design approved for the logo carton box stickers etc need to be obtained from TNCSC before starting the production 15 3 Electric Table Fan Serial Number a The Electric Table Fan serial number shall consist of 6 segments with 16 digit number in the following sequence as given below 1 digit 2 digit 2 digits 2 digits 2 digits 7 digits 3 TF 00 13 00 0000001 First 5 digits are permanent code The next 2 digits year code which will vary every year The next 2 digits month code which will vary every month The last 7 digits are running serial number irrespective of month and year For example the serial number for a Electric Table Fan would be 3 TF 01 13 00 0000001 b All the numbers as shown above shall be continuous The serial number shall be pre printed in barcode stickers and shall be stuck on each and every Electric Table Fan c Assigning Bar Code Number by the Prime Bidder to his consortium members shall be got approved from TNCSC by intimating well in advance 15 4 Packing and storage A Packing list A packing list should be prepared for the following items a Electric Table Fan model number batch number and serial number b User manual in Tamil an
40. e tests prescribed in the tender in the presence of Purchasers representative at manufacturer s point and the selection of sample and criteria for conformity are governed by Appendix B of IS 302 1 1979 c One number out of the above mentioned 32 Nos of samples which are tested and passed at the manufacturer s point will then be selected at random from the alternative batch by the Purchaser s representative and further tested at any of the NABL accredited laboratory or BIS recognised laboratory for the tests prescribed in the tender d The samples should comply with the requirements of quality standard in the tests mentioned at b and c above else the lot will be rejected e The cost of all the above tests shall be borne by the Supplier 29 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 ii After supply a It is the responsibility of the successful tenderer s not only to deliver the item but also have it tested They are responsible for the supply till it is accepted b Five percent of the quantity supplied shall have to be switched ON and the functioning thereof has to be tested in the presence of District Revenue Officials acceptance team for their acceptance The vendors representative has to be present and carry out the testing The District Revenue Official acceptance team would issue the delivery and
41. ed either by TNCSC or by any other Govt Govt undertaking as per Annexure ll is enclosed 13 Whether declaration form duly signed by the tenderer as in Annexure lll is enclosed 14 Whether terms and conditions of the tender in original is duly signed in each page 15 Whether a Video CD covering the entire manufacturing process of the company from the raw material stage to the finished product is furnished 16 Whether documentary proof for manufacturing of the item quoted for atleast for the last three years has been enclosed 17 Whether list of lab equipment available in the tenderer s manufacturing premises is furnished 18 Whether list of plant and machinery available in the tenderer s manufacturing premises is furnished 19 Whether a letter of undertaking to establish service centres call centres upto Assembly constituency level in the State of Tamil Nadu is enclosed 20 Whether a self certificate certifying that the quality of samples given and product to be supplied is conforming to the technical specifications prescribed in para 21 is enclosed as per Annexure lV 21 Whether a certificate on the supply of minimum quantity prescribed in the tender as per Annexure V is enclosed 22 Whether a declaration is enclosed as required in para 5 6 d in case if the tender documents are downloaded from website Annexure V 23 Whether Tender s
42. encies in Tamil Nadu The successful tenderer should set up a local office in Chennai within 15 days from the date of issue of the letter of acceptance Service centers shall be opened in all Assembly constituencies where supplies have been ordered through the tenderer in the State of Tamil Nadu within 45 days from the date of receipt of letter of acceptance to provide service during warranty period If the supplier has failed to provide Service Centres the payments to the supplier shall be withheld till such time the Service Centres are established 14 7 Refund of earnest money deposit The earnest money deposit will be refunded to the unsuccessful tenderers after the finalisation of tender and issue of firm purchase order to the successful tenderer within a reasonable time EMD amount of successful tenderer will be refunded on payment of Security Deposit Alternatively EMD can be adjusted towards payment of SD 14 8 Supply and commissioning a Supply and commissioning of all the ordered items must be commenced as per the specification given in para 21 and as per the model given in Annexure XI within Sixty days from the date of issue of Letter of Acceptance LOA and the entire supply should be completed within the time schedule specified in the purchase order b Proto type sample should meet the quality requirements and the successful tenderers should ensure the supply of the allotted quantity only as per proto type sample i e no change wil
43. ender document can be obtained in person from the above mentioned office or by post on all working days up to 5 30 P M on 22 08 2013 on payment of Rs 2100 or Rs 2200 respectively by means of Demand Draft drawn in favour of Tamil Nadu Civil Supplies Corporation payable at Chennai TNCSC is not responsible for any delay in receipt or non delivery of Tender Document by post courier Alternatively the tender document can also be downloaded from www tncsc tn gov in or www tenders tn gov in at free of cost 10 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 4 QUALIFICATION CRITERIA 1 Tenderer a Should be a manufacturer of Electric Table Fan as per IS 555 1979 at least for a period of 3 year as on 31 03 2013 and should possess valid registration for the manufacture Copy of valid registration certificate should be enclosed b The tenderer shall either be a single party or consortium of maximum of three parties c In case of consortium bidder each member of the consortium should be a registered company and existing for a period of 3 years as on 31 03 2013 d Incase of consortium bidder the lead Prime member or atleast one of the member of the consortium shall be a manufacturer of Electric Table Fan as per IS 555 1979 atleast for a period of 3 years as on 31 03 2013 Copy of valid registration certificate should be e
44. eposit will be forfeited if a tenderer withdraws the tender during the period of tender validity specified in the tender or if the tenderer fails to sign the agreement Further the security deposit will be forfeited for any non adherence of the tender conditions and for the non supply of ordered quantity either in full or in part thereof 14 4 Execution of agreement a The successful tenderer is required to execute supply agreement for the fulfillment of the contract in an Rs 100 Non Judicial stamp paper within three days from the date of receipt of letter of acceptance issued by the TNCSC b The successful tenderer shall not assign or make over the contract the benefit or burden thereof to any other person or persons or body corporate for the execution of the contract or any part thereof TNCSC reserves its right to cancel the purchase order either in part or full if this condition is violated 27 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 14 5 Release of firm purchase order After payment of security deposit and successful execution of the agreement Firm Purchase Order for the supply and commissioning of Electric Table Fan will be issued to the successful tenderers by TNCSC The supply and payment will be based on the Purchase Order only 14 6 Establishing local office in Chennai and service centers in all Assembly Constitu
45. est money deposit 17 8 Submission of tender 18 8 1 Submission of tender under two cover system 18 8 2 Documents to be furnished in the Part I cover Technical Bid 18 8 3 Signing of Tender 20 8 4 Details to be furnished in the Part II cover Price Bid 20 8 5 Mode of submission 21 9 Opening of tenders 21 9 1 Tender opening 21 9 2 Criteria for evaluation of technical bid 22 9 3 Period of validity of tender 22 10 Sample testing for tender evaluation 22 11 Opening of price bid Part II cover 23 11 1 Evaluation of the Price bid 24 12 Warranty period 25 13 Special terms 25 2 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Acceptance of tender award of contract payment of security 14 2p deposit and execution of agreement 14 1 Acceptance of the tender 26 14 2 Letter of Acceptance 26 14 3 Payment of Security Deposit SD 27 14 4 Execution of Agreement 27 14 5 Release of Firm Purchase Order 28 14 6 Establishing local office in Chennai and Service centres in all 98 Assembly constituencies in Tamil Nadu 14 7 Refund of Earnest Money Deposit 28 14 8 Supply and Commissioning i 14 9 Sample selection and testing 29 i Before supply 29 ii After supply 30 14 10 Insurance 30 i
46. gov in or www tenders tn gov in have not been tampered with modified in any manner In case if the same is found to be tampered with modified I we shall abide by all conditions setforth therein SIGNATURE OF THE TENDERER WITH SEAL AND ADDRESS DATE 58 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Vide check list Question No 23 Tender s Covering Letter Letter should be submitted in Tender s Letter Head Date To The Managing Director No 12 Thambusamy Road Tamil Nadu Civil Supplies Corporation Kilpauk Chennai 600010 Dear Sir Sub Tender for Supply and Commissioning of Electric Table Fans under the Scheme of Government of Tamil Nadu for Distribution of Fan Mixie and Grinder Reg Ref Tender Reference Spl Prog 16 29251 2013 We have examined the Tender for supply of Electric Table Fans as specified in the Tender We undertake to meet the requirements and supply Electric Table Fans and services as required and are set out in the Tender document We attach our Technical Bid with EMD cover and Price Bid in separate sealed covers as required by the Tender both of which together constitutes our proposal in full conformity with the said Tender We have read the provisions of Tender and confirm that these are acceptable to us We further declare that additional conditions variations deviations
47. hall down load corrigendum if any published subsequently and submit along with the tender otherwise the tender will be rejected It is the responsibility of the tenderer to check whether any 16 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 corrigendum has been given by the TNCSC subsequently in the website newspapers c The tenderer shall submit downloaded tender documents in original without any change addition deletion and correction If any change addition deletion is detected at any stage after the award of the tender the EMD as well as S D remitted by the tenderer will be forfeited without any intimation and their name will be black listed from participating in subsequent tenders Besides they will also be prosecuted d A declaration should be given by the tenderer along with the tender in the form given in Annexure VI 6 COST OF TENDERING The tenderer shall bear all costs associated with the preparation and submission of tender TNCSC will in no way be responsible or liable for these charges costs incurred regardless of the conduct or outcome of the tender process 7 EARNEST MONEY DEPOSIT a An earnest money deposit amount of Rs 7 00 000 Rupees Seven lakh only should be paid along with technical offer by way of demand draft banker s cheque obtained from a nationalised scheduled bank drawn in favour
48. ime c The tenders received after the due date and time will not be considered and will be returned unopened Tenders in unsealed covers or in incomplete shape or through facsimiles Fax or by electronic mail will not be accepted Tenders received without sample shall also be summarily rejected d A tender once submitted shall not be permitted to be altered or amended 9 OPENING OF TENDERS 9 1 Tender opening a The Tender outer cover and technical bid cover Part I cover including EMD cover will be opened at the prescribed date and time in the presence of tenderers or their representatives who choose to be present The representatives of tenderers who attend the tender opening must produce their Identification proof and authorisation letter from the companies b If the date fixed for opening of tender happens to be a Government holiday for any reasons the sealed tenders will be received and opened on the next working day at the appointed time c Part I cover containing technical offer shall be opened first The supporting documents shall be cross checked wherever required d The Technical bid will be opened on 23 08 2013 following which the bids will be evaluated After the completion of evaluation the qualified bidders will be called for the price bid Part Il cover opening The results of the technical evaluation will be intimated by post and mail 21 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and c
49. ion No 9 51 Annexure II For check list question No 12 52 Annexure Ill For check list question No 13 53 Annexure IV For check list question No 20 54 Annexure V For check list question No 21 57 Annexure VI Declaration Form For check list Question No 22 58 Annexure VIl Tender s covering letter Format 59 Annexure VIll Sample Electric Table Fan test report Format 61 Annexure IX Bank Guarantee Format 62 Annexure X List of machineries testing equipments required to be provided by the tenderer at the manufacturing unit 64 Annexure XI Illustrative Model of Electric Table Fan 65 4 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 1 PREAMBLE OF TENDER Rate contract for supply and commissioning of Electric Table Fan a The Government of Tamil Nadu in Special Programme Implementation Department have issued orders for free distribution of Electric fans mixies and grinders to the women beneficiaries belonging to the families holding family cards which are eligible for drawing rice The Tamil Nadu Civil Supplies Corporation has been entrusted with the task of procurement under the scheme b It is therefore proposed to purchase 34 46 000 pieces of Electric Table Fan as per IS specifications apart from incorporating certain specific requirements as mentioned herein The Government have sanctioned necessary f
50. ipments available at their manufacturing units for manufacture and for conducting the Tests specified in the tender document and the Type Tests prescribed in the IS 555 1979 13 List of Service Centres now available in Tamil Nadu 19 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 8 3 Signing of tender a The tender shall be typed or written in indelible ink and shall be signed by the tenderer or a person duly authorised to bind the tenderer to the contract All pages of the tender shall be signed by the person or persons authorised to sign the tender b Any alterations corrections or overwriting shall be treated as valid only if they are authenticated by full signature by the person or persons authorised to sign the tender c The tender once submitted cannot be modified or amended or withdrawn No documents of a supplementary nature will be received after submission of tender 8 4 Details to be furnished in the Part ll cover Price bid a All the Price items as asked in the Tender should be filled in the Price Bid Part ll format as given in the Tender b The price quoted by the Bidder shall include cost and expenses on all counts viz cost of equipment materials tools techniques methodologies manpower supervision administration overheads travel lodging boarding in station amp outstation expe
51. ith shorter validity will be rejected as non responsive This validity period shall not bind the delivery schedule 10 SAMPLE TESTING FOR TENDER EVALUATION a The tenderer shall get tested 2 No of samples quoted by them in any of the NABL Accredited or BIS recognized laboratory in India for the tests specified in the tender schedule for the product quoted b The test reports shall indicate the tests conducted observed value of the parameters against the standards and its compliance Copy of the above test reports with one No of the tested sample and one number of fresh sample which will be retained as prototype sample shall be submitted along with the tender The TNCSC reserves right to test the samples at its discretion and in the event of failure of the sample in the test the tender will be rejected 22 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 The successful Tenderer shall adhere to the model of the sample submitted by him at the time of Tender when the supply is commenced c In addition to the above the bidders are required to get the Type Test Report as per IS 555 1979 and the Test Report for plastic materials as per Table in NABL Accredited or BIS recognized laboratory in India and the valid Type Test Report complying to the requirement as per IS 555 1979 shall be furnished along with the technical bid Part I cover
52. l be entertained mid way of the supply schedule c The Electric Table Fans must be delivered at the designated locations at the Assembly constituencies in the State of Tamil Nadu in good 28 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 condition and the unloading charges should be borne by the Supplier Safe transport shall be the responsibility of the Supplier Transport breakages if any shall be replaced by the supplier 14 9 Sample selection and testing i Before supply a The details of original source of raw materials and critical components along with appropriate test certificates such as original Supplier s own test certificate and or the test certificates from the lab in which the materials were tested by the original Suppliers should be made available to the representative of the Purchaser as and when required for verification All the plastic materials will be subjected to tests at Central Institute of Plastic Engineering and Technology CIPET Chennai or any other equivalent laboratories in accordance with plastic used instrument industry specifications vide IS 7078 Steel materials will be subjected to test at any Government approved laboratories b 32 Nos of samples for every lot representing 2500 Nos will be taken at random by the representative of the purchaser and these samples will be subjected to th
53. lish translation copy of the supporting documents are liable to be rejected For any wrong translation the tenderer is responsible 5 5 Consortium a The consortium joint venture agreement shall be registered in INR 100 Non Judicial stamp paper b A legally valid agreement shall be executed for the consortium binding all the members All partners of the consortium shall be liable jointly and severely for the execution of the contract in accordance to the contract terms and it should be explicitly stated in the consortium agreement The consortium agreement should indicate precisely the role of each member of the consortium in respect of the contract c Copy of the consortium agreement shall be enclosed with the technical bid Alternatively a letter of intent to execute a consortium agreement in the event of a successful bid shall be signed by all the partners and submitted with the bid together with the copy of the proposed agreement 15 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 d The consortium agreement shall authorize one of the members of the consortium as prime member bidder who meets the turn over criteria applicable to the prime member bidder as prescribed in the tender document This authorization shall be evidenced by submitting of Power of Attorney signed by the legally authorized signatories of all the partne
54. lso be marked on the top with the firm name and address of the tenderer and these two covers should be packed in a single cover Outer cover and put into tender box before the date time prescribed The tender will not be received personally b If the tenderer prefers to submit the tender by post courier the tenderer should ensure that the tender to reach the Managing Director TNCSC on or before the due date and time TNCSC will not be liable or responsible for any postal courier delay or any other delay whatsoever c If any tender is received after due date and time or unsealed or disorderly submitted or received by Facsimile FAX the tender will be treated as non responsive 8 2 Documents to Be Furnished In the Part I Cover Technical Bid a The Technical Bid format as given in the Tender shall be filled signed and stamped on all pages Errors if any shall be attested by the Bidders The Technical Bid shall not contain any indications of the Price otherwise the Bid will be summarily rejected b The supporting documents and other documents as given below should be submitted in the Technical Bid 18 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 EMD should be kept in a separate cover superscribed as EMD Cover Authorisation letter or Power of Attorney from the Board of Directors Managing Direct
55. ment carried out by using above equipment are traceable to National Standards 61 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Bank Guarantee Format To be executed in Rs 100 Stamp Paper To The Managing Director Tamil Nadu Civil Supplies Corporation No 12 Thambusamy Road Kilpauk Chennai 600035 Bank Guarantee No Amount of Guarantee Guarantee covers from Last date for lodgement of claim This Deed of Guarantee executed by 605 Bankers Name amp Address having our Head Office at 008 address hereinafter referred to as the Bank in favour of The Managing Director Tamil Nadu Civil Supplies Corporation No 12 Thambusamy Road Kilpauk Chennai 600 010 hereinafter referred to as the Beneficiary for an amount not exceeding Rs Rupees Only as per the request of M s having its office address at hereinafter referred to as Supplier against Letter of Acceptance reference dated _ _ ____ of M s Tamil Nadu Civil Supplies Corporation This guarantee is issued subject to the condition that the liability of the Bank under this guarantee is limited to a maximum Rs Rupees Only and the guarantee shall remain in full force up to 31 12 2014 from the date of Bank Guarantee and cannot be invoked otherwise by a written demand or claim by the beneficiary under the Gu
56. nal prices for the Electric Table Fan models are found in the Price Bid the lowest price alone will be considered for evaluation 23 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 11 1 Evaluation of the price bid The tender will be evaluated in accordance to the Tamil Nadu Transparency in Tenders Act 1998 read with the Tamil Nadu Transparency in Tenders Rules 2000 a b c d e g h i In price bid evaluation the following procedure will be adopted The evaluation shall include all central duties such as customs duty and central excise duty and sales tax as a part of the price as detailed below In evaluation of the price of an imported item the price will be determined inclusive of the customs duty and other taxes duties if any In evaluation of the price of articles which are subject to excise duty the price will be determined inclusive of such excise duty In a tender where all the tenderers are from within the state of Tamil Nadu or where all the tenderers are from outside the state of Tamil nadu the sales tax shall be included for evaluation of the price and In a tender where the tenderers are both from the state of Tamil nadu as well as from out side the state of Tamil nadu the sales tax under the Tamil Nadu Value Added Tax shall be excluded for the evaluation of the price as per Rule 29 d IV
57. nclosed 2 a Turnover The average annual turnover of the bidder in the previous three financial accounting years of 2010 11 2011 12 amp 2012 13 or 2009 10 2010 11 and 2011 12 shall be not less than Rs 20 Crores i In the case of consortium bidder with three members the lead Prime member shall meet the 100 requirement of the turnover prescribed in the tender for eligibility and the other two members of the consortium shall meet atleast to the extent of 50 requirement of the annual turnover individually ii In case of consortium bidder with two members the lead prime member shall meet the 100 requirement of the turnover prescribed in the tender for eligibility and the other member of the consortium shall meet atleast 50 requirement of the annual turnover iii In the event of foreign companies participating with Turnover credentials the exchange rate as on 23 08 2013 will be taken for the purpose of tender evaluation iv Official documentation establishing Electric Table Fan manufacturing capacity from Tax Authorities Statutory Authorities of the country of Incorporation shall be submitted along with a certificate 11 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 from the Notary indicating that the translation was done by him If the documentation is not in English then notarized English translation should be su
58. nses transport and freight costs to the assembly constituencies supply locations etc and any other cost involved in the supply and commissioning c The Bid is liable for rejection if Price Bid contains conditional offers partial offers d The Price Bid shall be typed and shall be signed by the authorised signatory in all pages Any alterations deletions or overwriting shall be attested with full signature of the authorised signatory e The Price Bid shall be placed in a separate cover Part II and sealed appropriately The Price Bid cover shall be superscribed as Tender for Supply of Electric Table Fan Tender Ref due on The FROM address and TO address shall be written without fail otherwise the Price Bid is liable for rejection 20 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 8 5 Mode of submission a The tender must be dropped in the tender box kept at the office of the TNCSC on or before the due date and time The tender will not be received personally b The tenderers shall produce two number of samples as offered for testing to the testing agency and shall be submitted to TNCSC on or before the due date and time for closing of the tender under acknowledgement The samples of successful tenders will be retained by the TNCSC and that of unsuccessful bidders will be returned within a reasonable t
59. of TNCSC payable at Chennai The EMD in the form of Bank Guarantee is not acceptable b The earnest money deposit amount of the unsuccessful tenderers will be refunded after the acceptance of the successful tenders within a reasonable time The earnest money deposit amount held by TNCSC till it is refunded to the unsuccessful tenderers will not earn any interest thereof c The earnest money deposit amount of successful tenderers can be converted as part of the security deposit SD for successful execution of the tender d Any tender not enclosed with earnest money deposit amount as in clause 7 a above will be rejected summarily by TNCSC as non responsive 17 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 e The Earnest Money Deposit amount shall be forfeited by TNCSC if a tenderer withdraws the tender during the validity period specified in the tender or fails to sign the contract or to remit security deposit within the respective due dates 8 SUBMISSION OF TENDER 8 1 Submission of tender under two covers system a Tender should be submitted in two parts in original i e Part I cover and Part ll Cover The Part I cover is the technical offer and Part II cover is price offer The envelopes should be super scribed as Tender for rate contract for the supply of Electric Table Fan The Part I cover and Part II cover should a
60. of the Tamil Nadu Transparency in Tenders Act 1998 read with the Tamil Nadu Transparency in Tenders Rules 2000 C form will be issued at the time of settlement of bills The tenderer can quote the rate against C form TNCSC may carry out negotiation with the lowest tenderer L1 as per evaluation TNCSC reserves the right to ask other tenderers to match the L1 price if required according to the Tamil Nadu Transparency in Tenders Rules 2000 TNCSC reserves the right to apportion the total ordered quantity among the L1 bidder and other bidders as per the provisions of Tamil Nadu Transparency in Tenders Act and Rules and other terms and conditions of the tender 24 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 12 WARRANTY PERIOD 12 a The goods supplied under this contract shall be covered by comprehensive warranty against any manufacturing defect for a period of two years from the date of supply and commissioning from the date of acceptance of the Electric Table Fan b The Supplier shall be liable to make good the loss by replacing the Electric Table Fans or components found defective during the warranty period free of cost to the beneficiaries c Irrespective of the warranty obligations the Supplier is liable for replacing a faulty Electric Table Fan due to any manufacturing defects within 30 days after supply and commis
61. ollowed by hard copy TNCSC will process bills for payment of 90 of the cost of Electric Table Fans after satisfactory delivery at designated locations in the Districts based on the certifications by the District Collectors TNCSC may effect payment through online mechanism within 10 days after submission of the hard copy of delivery notes and acceptance report c The 5 withheld amount shall be released on successful delivery of the full ordered quantity of Electric Table Fan after the receipt of certificate from the Commercial Tax department about the remittance of VAT in full by the successful tenderers of Tamil Nadu only and after the receipt of the all type test reports from the laboratories d The remaining 5 shall be retained towards warranty and 2 will be released after successful completion of 1 year warranty period and the balance 3 will be released after successful completion of 2 year warranty period e The Duties and Taxes as applicable at the time of supply within the Delivery Schedule specified in the Tender will be paid by the Successful bidder In case the Duties and or Taxes have been reduced retrospectively after award of contract and within the Delivery Schedule the successful bidder is liable to return the same f The Managing Director reserves the right to recover any dues from the tenderer which is found on a later date during the audit after final settlement is made to them Accordingly the tenderer is liable
62. ommissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 9 2Criteria for evaluation of technical bid a Any tender not containing documents indicated in para 8 2 above and not fulfilling the qualification criteria indicated in the tender notification shall be summarily rejected b If found necessary the tenderer s manufacturing plant will be visited by the authorized representative s of the Purchaser to verify the availability of infrastructure facilities such as plant and machinery manufacturing capacity testing facilities ability to supply and quality practices at any time before awarding of tender to execute the contract as per the delivery schedule The Purchaser reserves the right to reject the tender of any tenderer based on the inspection report of the authorized representative s c The Inspection Team deputed by TNCSC will verify the address given in Sales Tax Registration and address of the production facility given in the Tender to ensure its correctness The address of the production facility given by one bidder consortium should not be given by any another bidder consortium If any such duplication of production facility is found the tenders submitted by all the consortiums with the subject production facility as their production unit will be rejected 9 3Period of validity of tender The rate offered in the Tender shall be valid for a period of 120 days from the date of opening of technical bid Bid w
63. or of the company Authority of the Organisation authorising the Tender submitting authority Consortium Agreement In case of Consortium a Consortium Agreement in INR 100 non judicial stamp paper should be signed by all consortium partners and submitted All the signatories of the Consortium Agreement shall be duly authorised by the respective Board of Directors Managing Directors of the Companies of the Consortium Authority of the Organisation A full set of Tender document should be printed signed by the authorised signatory and stamped in all pages as a token of accepting the conditions Technical Bid should be duly filled signed by the authorised signatory and stamped in all the pages All the supporting documents to prove tender s eligibility These documents should be signed by the authorised signatory and stamped in all pages and enclosed in the tender document Sample Electric Table Fan Test Report issued by the Government of India Testing Agency as mentioned in Clause 10 a Tenders shall furnish an undertaking for the supply of minimum of 1 00 000 Electric Table Fan if their Tender becomes successful 10 All undertaking letters as required in the Tender document 11 Profile of the company with a Video CD covering the entire manufacturing process of the company from the raw materials stage to the finished product 12 List of plant and machinery and laboratory equ
64. pecifications for plastic materials to be used in various parts Specifications for plastics material as per TABLE 1 and test certificates shall be produced from any NABL accreditated or BIS recognized laboratory for ensuring the quality 26 Assembling of two parts by fastening wherever required Clamping devices Brass insert with screw to avoid undue risk of working loose Minimum 4 nos of Brass inserts are required for fixing the bottom cover 2 nos of Brass inserts are required for fixing the Switch Assembly SIGNATURE OF THE TENDERER WITH SEAL AND ADDRESS 56 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Vide check list Question No 21 Certificate It is certified that Wercosc2sasescce ost esate ereraieeie have offered to supply a quantity of o on Nos of Electric Table Fan in the tender am aware that as per tender conditions if the quantity offered is less than 1 00 000 units the tender will be treated as non responsive Signature of the Tenderer with seal and Address 57 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Vide check list Question No 22 DECLARATION FORM I we having office at declare that the tender forms downloaded from the website www incsc tn
65. r the purchase of 34 46 000 Thirty Four Lakh and Forty Six Thousand numbers of Electric Table Fan strictly conforming to the BIS specifications and we shall abide by all the conditions set forth therein I we also undertake to take back the Electric Table Fans at our cost and replace the same which are rejected by the Tamil Nadu Civil Supplies Corporation SIGNATURE OF THE TENDERER WITH SEAL AND ADDRESS DATE 53 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Vide Check List Question No 20 SELF CERTIFICATION ON QUALITY Certified that the quality of two samples and the Electric Table Fan to be supplied on successful tendering shall conform to the minimum and supplementary technical specifications prescribed in para 21 of tender schedule as follows A Minimum specification I For Electric Table Fan As per IS 555 1979 B Supplementary specification and Compliance Statement of technical Specification 1 Rated voltage amp 230 240 V AC 50 Hz frequency 2 Input Power Maximum 61 Watts 3 Size of fan Blade sweep 400 5 mm 4 No of speed steps 3 steps OFF position near to lowest speed Speed Setting 1 Low 2 Medium amp 3 High Stickers will not be permitted Numbers should be engraved or screen printed 5 Air Delivery Minimum 65 cubic m minute
66. rminate the Contract in whole or in part at any time for its convenience The notice of termination shall specify that termination is for the Purchasers convenience the extent to which performance of work under the Contract is terminated and the date upon which such termination becomes effective 20 JURISDICTION Any dispute arising out of non fulfillment of any of the terms and conditions of this tender shall be subject to the jurisdiction of the court in the city of Chennai 39 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 29251 2013 21 TECHNICAL SPECIFICATION FOR ELECTRIC TABLE FAN A Minimum specification Electric Table Fan as per IS 555 1979 B Supplementary Specifications As noted below Rated voltage amp frequency 230 240 V AC 50 Hz Input Power Maximum 61 Watts Size of fan Blade sweep 400 5 mm No of speed steps 3 steps OFF position near to lowest speed Speed Setting 1 Low 2 Medium amp 3 High Stickers will not be permitted Numbers should be engraved or screen printed Air Delivery Minimum 65 cubic m minute Service value Minimum 1 08 cubic m min W Speed To be declared by the manufacturer Type of fan Oscillating a Angular movement not less than 60 b No of oscillations not less than 4 per minute at full speed Capacitor type Blades Well balanced 3 blades moulded as single piec
67. rs e The prime member bidder shall be authorized to incur liabilities and receive instruction for and on behalf of him and all partners of the consortium and entire execution of the contract including payment shall be done exclusively with the prime bidder All correspondence will only be made with the prime bidder f The prime bidder alone is to be held responsible for any non supply delayed supply quality of the products and all aspects related to the tender g The liability of the Prime bidder is firmly secured by way of Bank Guarantee h The Consortium members of the supplier to whom cancellation orders were issued for the year 2011 12 amp 2012 13 on account of supply of faulty products are ineligible for the year 2013 14 i A Tenderer cannot submit an individual tender and at the same time be a member of another consortium in another tender being offered under this rate contract Also only one tender will be allowed from each consortium 5 6 Tender form not transferable The tender form sold to a tenderer is not transferable It should not be used by others and if used by others it will not be accepted Similarly photo copy of the tender form will not be accepted 5 7 Downloaded tender form a The tender document can be downloaded through website on A4 size paper only and computer print alone should be submitted in the form of a booklet Submission of tender document in any other form will be rejected b Tenderer s
68. s a contract where a set of rates and terms and conditions are fixed for the supply of unit quantities of goods g Applicability of Tamil Nadu Transparency in Tenders Act 1998 This tender is governed by the Tamil Nadu Transparency in Tenders Act 1998 and The Tamil Nadu Transparency in Tenders Rules 2000 as amended from time to time In case of any conflict between the terms and conditions in the tender document and the Tamil Nadu Transparency in Tenders Act 1998 and the Tamil Nadu Transparency in Tenders Rules 2000 the Act and Rules shall prevail 6 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 2 CHECK LIST TENDERER TO FILL IN THE CHECK LIST GIVEN BELOW a PART COVER TECHNICAL BID PLEASE PLEASE SL DESCRIPTION STATE INDICATE NO YES OR NO PAGE NO IN WRITING 1 Whether the tender is submitted in two envelopes as Part l cover Technical Bid and Part II cover Price Bid 2 Whether a letter of authorization Power of Attorney for signing the tender document is enclosed in an Rs 100 Non Judicial stamp paper 3 Whether profile of the company is enclosed 4 Whether the two sample pieces of Electric Table Fan along with laboratory Test Report as per clause 10 b are submitted with tender 5 Whether the certificate from BIS NABL accredited laboratory stating that the samples
69. se the service provided by any centre is not satisfactory phone fax mobile numbers and email address must be provided by the successful tenderer s d During the warranty period of 2 years the Suppliers are liable to replace within 72 hours all faulty equipment if the malfunction is notified within 30 days after supply If the malfunction is notified beyond 30 days after supply the equipment should be repaired with the replacement of spare parts within 72 hours The replacement of the equipment repair with replacement of spares shall be at free of cost e If the replacement of the faulty equipment or repair with replacement of spare parts as required in para d above are not carried out within 72 hours penalty of 1 of the value of the equipment will be levied per week f In case the Supplier fails to carry out the warranty regulations the District Collector Commissioner of Chennai would engage any other operator and carry out the service replacement and deduct the expenses incurred from the amount retained by TNCSC as per the payment terms 35 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 16 PAYMENT TERMS a No advance payment will be made or no letter of credit shall be established b The payment shall be made only through ERP system The Supplier shall submit delivery and commissioning certificate by online first f
70. se without assigning any reason whatsoever It is hereby confirmed that we are entitled to act on behalf of our company organization and empowered to sign this document as well as such other documents which may be required in this connection Authorised signatory Name of the authorised person Designation Name of tenderer Stamp of Tenderer 60 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 Sample Electric Table Fan Test Report Name of the Testing Agency Place REPORT NO Reference lt job no gt PAGE OF __ TEST ON Electric Table Fan DATE OF ISSUE dd mm yyyy 1 1 Service Request No 1 2 Name amp Address of the Client 1 3 Description amp Identification Nomenclature of Test Sample s Make Model SI No Accessories 1 4 Sample s Received Test Completed j p Date dd mm yyyy Date dd mm yyyy 1 5 Testing performed at Centre 1 6 No of sample s tested In Figure In Words As per Customer s Specification Reference IS 555 1979 1 7 Standard Test Procedure Tender Reference Scope Type Testing 1 8 Major Equipment used and traceability Details Un ert ini Calibration No Equipment Used y Reference Valid up to Best Case R eport Agency 1 2 3 4 5 6 The measure
71. sioning Replacement of spare parts during warranty period arises only after the above stated 30 days period d The warranty will cover all the materials and goods supplied by the Supplier under this contract irrespective of the fact whether these have been manufactured by the Successful Bidder or not In this regard the decision of the TNCSC will be final and binding on the successful bidder e The free warranty at the designated centres against breakages malfunctions and leakages due to manufacturing defects but does not include user made physical damages 13 SPECIAL TERMS TNCSC reserves the right to a Negotiate with the tenderer whose offer is the lowest evaluated price for further reduction of prices b Specify terms on quality and specification of materials to be supplied c Arrive at a common uniform design and shape and direct all the Suppliers to supply as per the common design chosen by it d Modify reduce or increase the quantity requirements to an extent of 25 of the tendered quantity as per the provision of Tamil Nadu Transparency in Tenders Rules 2000 25 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 e Ask other tenderers to match L1 price as this is a rate contract tender f Modify the bidding document by an amendment 48 hours prior to the deadline for submission of the tender 14 ACCEPTANCE OF TENDE
72. to furnish all required information in every respect will be at the tenderer s risk and may result in the rejection of the tender For any queries Contact phone No 044 26426773 6 26424871 b The representative model of the item for which tenders are invited is at display at the Head Office of TNCSC at 12 Thambusamy Road Kilpauk Chennai The same can be inspected by the interested bidders during Office hours on all the working days up to the last date for issue of tender document c The tenders shall be deemed to have satisfied him self themselves fully before bidding as to be correctness and sufficiency of his their bid for the contract and price quoted in the bid to cover all obligations under this tender d It must be clearly understood that the terms and conditions and specifications are intended to be strictly enforced e The tender shall be fully and completely responsible to TNCSC and State Government for all the deliveries and deliverables as per tender condition 13 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 f No escalation of cost in the Tender by the Tenderer will be permitted throughout the period of Agreement or throughout the period of completion of contract whichever is later on account of any reasons whatsoever g In the event of production assembly of the product being done in a foreign country all q
73. to pay such dues to the Corporation g The details of Excise duty Customs duty and VAT wherever applicable paid by the supplier to Government of India and State Government respectively should be furnished in the succeeding month before 25 If the details of customs duty excise duty and VAT as listed are not submitted then the next bill payment will not be processed 36 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 17 PENALTY CLAUSE a If the successful tenderer fails to deliver the materials as per the delivery schedule specified by the Managing Director TNCSC will have the right to levy 1 value of the delayed quantity for every week of delay after the due date as penalty The maximum penalty imposable shall be 5 of the value of the goods delivered belatedly b TNCSC will have the right to cancel the order partially or in full and entrust the supply orders to another tenderer at the risk and cost of the Supplier if the supply is delayed beyond 30 days after the due date The additional cost incurred in such an event will be recovered from the Supplier who fails to supply in time This shall be without prejudice to the levy of penalty indicated in clause a above The Supplier is bound to pay the consequential loss if any sustained by the TNCSC c If any of the Suppliers misuse the Electric Table Fans with TN Government Logo
74. tolerance 5 65 65 SIGNATURE OF THE TENDERER
75. uality control arrangements done by CIPET and TNCSC shall be carried out as in manufacturers located in India However the cost of such deployment of personnel and related expenses inclusive of accommodation travel etc shall be borne by CIPET and TNCSC and the cost reimbursed by the manufacturer The expenses incurred by CIPET and TNCSC shall be deducted at every stage of a bill of payment being considered 5 1 Pre bid Meeting There will be a prebid meeting on 12 08 2013 at 3 00 P M in the Head Office of TNCSC at 12 Thambusamy Road Kilpauk Chennai during which the prospective tenderers can get clarifications about the tender The tenderers shall send their queries in writing if any so as to reach TNCSC atleast two days prior to the pre bid meeting date The tenderers may also check the TNCSC website www tncsc tn gov in for any uptodate information like change in date venue etc of pre bid meeting as TNCSC may not be able to identify and communicate with the prospective bidders at this stage Non attending of pre bid meeting is not a disqualification 5 2 Clarifications on the tender A prospective tenderer requiring any clarification on the tender may request Tamil Nadu Civil Supplies Corporation by a letter or by fax or by email tncscetf tn gov in TNCSC will respond in writing to any request for clarification in the tender For e mail communication from the tenderers e mail reply from TNCSC shall be treated as valid communication 5
76. und for this purpose in the year 2013 2014 c The successful tenderer has to supply the Electric Table Fans at the designated locations at all Assembly constituencies and provide servicing facility for the period and manner mentioned in the tender d Based on the Government orders TNCSC proposes to finalise a rate contract by calling for tenders from the manufacturers of Electric Table Fan through competitive bidding process for supply and commissioning of Electric Table Fan as per specifications given in the tender to carryout the above objective of the Government e The successful tenderers should work closely with Government of Tamil Nadu and Tamil Nadu Civil Supplies Corporation in achieving the scheduled targets 5 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 f Short Titles used in the Tender Document Tenderer bidder Tenderer bidder means the party or consortium of parties who makes a formal offer in pursuance of the tender floated Successful tenderer Successful tenderer means the tenderer who becomes successful through the tender process Manufacturer Manufacturer means the firm which manufactures item either by way of producing each item at its manufacturing plant or makes the Assembly of all components at its plant Day A day means a calendar day Service Centre A servic
77. vered either from their bills or from any other amount due to them 14 10 Insurance The delivery of goods to the destination is the responsibility of the Supplier only Insurance if any is the Supplier s responsibility 30 65 SIGNATURE OF THE TENDERER Competitive Re Tender for the supply and commissioning of Electric Table Fan Tender reference Spl prog 16 2925 1 2013 15 ACTIVITIES DURING SUPPLY amp COMMISSIONING OF ORDERED ITEMS 15 1 Pre despatch inspection a Pre despatch inspection is the sole responsibility of the manufacturer The manufacturer should arrange for Acceptance Test in the presence of the Purchaser s representative However Tamil Nadu Civil Supplies Corporation may at its own discretion draw samples either directly or through its inspection team or through a third party agency for testing the quality of materials prior to the despatch to ensure the compliance of tender conditions as stated in Para 14 9 The TNCSC reserves the right of checking the raw material used for the production of the tendered items at all times and the Supplier should furnish the entire documentary proof and assist the inspection arranged by the purchaser In case if any substandard raw materials are found to be used by the Supplier the TNCSC is at liberty to take action to terminate the contract and to proceed with criminal action if needed b TNCSC may nominate officers to the manufacturing plant to supervise the quality of manuf

Download Pdf Manuals

Related Search

Related Contents

Otterbox BlackBerry Curve 8500/9300 Defender Series Case  Clarion Net iDXZ275MP User's Manual  MASTER USER MANUAL - Intelligent Security & Fire Ltd  Cables Direct IEEE-EXT5 firewire cable    F Series Indoor IP User`s Manua  OpenComms NIC  DCR-PC1000  Delta 9997-AR-DST Installation Guide  Corpo da Dissertacao - Biblioteca Digital do IPB  

Copyright © All rights reserved. Failed to retrieve file