ContourHD Wearable Camcorder - Shopify
Contents
1. after 15 min of inactivity Status Press power button to check status Memory Battery Available Green gt 80 Yellow 20 80 Red lt 20 Record Status Green ready Red recording Flashing memory full or corrupt Error Conditions Memory full 3 beeps recording stops Memory corrupt 3 beeps shuts o Battery dead lights flash beeps shuts o No beeps camera in silent mode We are here to help Keeping Shoot and Share simple is what we are all about We would love to help you have a great ContourHD experience so please contact us with any quesitons you have Hours Monday Friday 9am to 6pm PST Toll Free 866 397 6920 USA International 206 792 5226 Email support vholdr com Web www vholdr com support ContourHD Wearable Camcorder User s Guide About the Camera Open the back door Insert battery with aligned and close orange latch Align back door slightly above camera and slide down until it locks in Getting Ready Push and hold power button 1 second to turn on Camera beeps and lights turn o You are ready to record Note Power up with record switch forward to enable silent mode Power Up Start recording slide switch forward Stop recording slide switch back Congrats your first video Share Turn camera on and connect to computer with USB cable Install VholdR Desktop direct2. ly from MicroSD card provided or download at www VholdR com support software Import clip and share your videos Note HD is beautiful but some computers cannot play smooth HD video Visit www vholdr com support for the latest information on computer requirements Record SD HD start stop a Power Button b Battery Status c Record Button d Rotating Lens e Record Status f Memory Status a HD SD Switch b USB c Charge Indicator d Battery Latch e Battery Slot f MicroSD Card a b c d e f a b c d f e
3. thumb tab Flat Surface Mount Unhook leash on base and loop through camera Slide camera onto rails until it clicks Adhere mount to flat surface top or side of helmet recommended Hold base pull camera away rotate to align and press into mount to reattach Goggle Mount Slide camera on rails until it clicks Press thumb on large tab top of mount and pull camera away Slide goggle strap into base Align vertical angle of camera Snap rails back into mount over strap Align Press power button to activate lasers Aim at your hand a wall or other object Rotate lens to align lasers horizontally Remove and reorient mount rails to adjust mount angle Aim a little high for the best shot Resolution Settings Use switch under back door to select video resolution HD Amazing Clarity 1280 x 720 at 30fps 30 min avg record time GB 135 deg field of view SD Fast Action 848 x 480 at 60fps 60 min avg record time GB 90 deg field of view 2GB microSD card included Accepts up to 16GB microSD SDHC Compatible Note Always power o before ejecting card Power Recharge Connect to computer with USB cable Red light indicates charging Charge complete when camera beeps and red light turns o about 3 hrs Power O Press and hold power button 3 seconds Hear a double beep and lights turn o Camera automatically turns o
Download Pdf Manuals
Related Search