Thermo Scientific Touch Screen Digital Dry Bath User Manual PDF
Contents
1. Thermo Scientific Thermo Scientific Section 5 Preparation Work This chapter introduces the structure of the instrument user interface and functions of all buttons and preparation before startup Read the content in the chapter carefully before startup when using the instrument for the first time 1 Structure Interface y Housing Front Cover LCD Touch Screen Figure 5 1 Unit Front Se Outlet for External CU Temperature Sensor Product Label iiu Handle Power Socket Fuse Housing Power Switch Figure 5 2 Unit Back Note 1 When the external temperature sensor is connected the internal temperature sensor will disconnect automatically and the temperature control and display will relay on the external temperature sensor 2 DO NOT plug in or remove the external temperature sensor without the power being off 5 1 Section 6 Operation Guidance The chapter introduces the display window and the operation of buttons of the dry bath with constant temperature Examination Before Confirm the following before inserting the plug into the power socket Sta rt Up 1 Ensure the power source is in accordance with the voltage requirement of the instrument refer to Features section for voltage requirements 2 Make sure the plug has been completely inserted into the power socket 3 Ensure the power line has been reliably grounded Caution If the display of the instrument is abnormal after s2. Thermo Scientific Touch Screen Drybath Dry Bath with Advanced Microprocessor Control Catalog Number 88870007 88870008 88870009 88870010 88870011 88870012 Operation Manual 0000849 Visit us online to register your warranty www thermoscientific com labwarranty Preface Safety Information Alert Signals Warning The warning message requires extremely careful operation of a certain step Failure to observe the instruction may result in serious personal injury Caution Important information is contained in any item and should be carefully read Failure to observe the instruction would result in damage or abnormal function of the instrument Note Notes alert you to pertinent facts and conditions Warning If the Thermo Scientific Touch Screen Drybath is used in a manner not specified by the manufacturer the protection provided by the unit may be impaired Thank you for selecting Thermo Scientific for your equipment needs Your Thermo Scientific Touch Screen Drybath has been designed with functionality reliability and safety in mind It is your responsibility to use this instrument in conformance with local electrical codes It is very important that the user follows installation instructions exactly as written Do not attempt operation without this information All rights reserved Thermo Fisher Scientific reserves the right to modify this manual at any time without notice Without prior written consent from Thermo Fisher S
3. supplier for service Liquid drops into the inside of the instrument The instrument is rained on or water is spilled on it The instrument works abnormally especially if generating an abnormal sound or odor The instrument is dropped or its casing is damaged The function of instrument obviously changes Section 2 Maintenance The holes of the blocks should be regularly cleaned with the damp cloth to ensure the test tube be well contacted with the wall of the holes so as to have good heat conduction If the surface of the instrument is polluted it can be cleaned with a slightly damp soft cloth Warning When cleaning the instrument the power supply should be shut off and unplugged The instrument surface should be cleaned with a non corrosive cleaning agent A 2 1 Thermo Scientific Section 3 Introduction Caution After unpacking immediately check the goods against the packing list In case of damaged or missed goods please immediately contact the distributor in which the product was purchased from After unpacking the packing box and packing materials should be well kept for future repair For the damage of instrument occurring during transporting to the repair department due to improper package Thermo Fisher Scientific will not be held responsible for damages A The product is dry bath with advanced microprocessor control which can be widely applied to sample reservation enzyme reservation and reaction DNA
4. 0 0 cece eee eee eee eee 10 1 Thermo Scientific Section 1 Safety During operation maintenance and repair of this instrument the following basic safety notes should be observed In case of failure to follow these instructions the warnings or notes indicated herein the basic protection provided by the instrument its safety criteria of design and manufacture and its predicted use range would be impaired If the equipment is used in a manner not specified bythe manufacturer the protection provided by the equipment may be impaired Thermo Fisher Scientific is not responsible for any injury as a result of the user s failure to observe the following requirements Caution This instrument is for indoor use A a Ihe ground connection To avoid the electric shock the input power line must be reliably grounded The instrument is equipped with the three pin plug that has the third pin the pin connects the ground therefore the plug should be used with the grounded power socket only This is a kind of safety device If the plug cannot be plugged into the power socket please ask the electrician to install a correct power socket so as to make the grounded plug to work for safety b Servicing and Replacement of Parts The operator should not take apart the instrument without permission Only qualified professionals are allowed to replace elements or adjust components inside the instrument Replacement of components while unit is connecte
5. amplification electrophoresis degeneration and serum coagulation etc The characteristics of the product are as follows The digital display and control of the temperature Heat blocks help avoid possible contamination while containing the sample inside a tube The heat blocks are easily replaced cleaned or disinfected and are suit able for various tubes Built in over temperature protection device warrants sample and user safety Temperature deviation adjustment 3 1 Section 4 Features This chapter introduces the usage transportation storage conditions of the instrument as well as its basic parameters performance and functions 1 Normal working conditions Ambient temperature 10 C 30 C Relative humidity lt 80 Power supply 100 120V 50 60Hz or 200 240V 50 60Hz Altitude Up to 2000 m Pollution Degree 2 Overvoltage category II Indoor use Caution Before using the instrument make sure the working conditions meet the above requirements A 2 Transportation and storage conditions Ambient temperature 20 C 55 C Relative humidity lt 80 3 Basic parameters Table 1 100 120V Parameters Type Touch Screen 1 block Touch Screen 2 block Touch Screen 4 block TH 100 120V 100 120V 100 120V Temperature Range Ambient Temperature 5 C 130 C ambient temperature 25 C Temperature Uniformity lt 1 0 C Temperature Accuracy lt 0 5 C 37 C Temperature Fluctuation lt 0 5 C lt 2
6. 0 Nordic Baltic countries 358 9 329 100 Russia CIS 7 812 703 42 15 Spain Portugal 34 93 223 09 18 Switzerland 41 44 454 12 12 UK Ireland 44 870 609 9203 Asia China 86 21 6865 4588 or 86 10 8419 3588 India toll free 1 800 22 8374 India 91 22 6716 2200 Japan 81 45 453 9220 Other Asian countries 852 2885 4613 Countries Not Listed 49 6184 90 6940 or 33 2 2803 2180 l hermo SCIENTIFIC A Thermo Fisher Scientific Brand
7. 5 min Crise from 30 C to 130 C 373x200x100 mm 403x200x100 mm 535x200x100 mm 4 1x7 87x3 94 in 15 9x7 87x3 94 in 21 1x7 87x3 94 in Temperature Rise Time lt 20 min Crise from 30 C to 130 C Size mm LxWxH Weight 3 4 kg 7 5 Ibs 3 7 kg 8 16 Ibs 5 1 kg 11 24 Ibs Fuse Protector g5x20 F250V 2 5A F250V 5A F250V 8A Thermo Scientific 4 1 Section 4 Features 42 3 Basic Parameters continued Table 2 220V Parameters ye Touch Screen 1 block Touch Screen 2 block Touch Screen 4 block YP 200 240V 200 240V 200 240V Temperature Range Ambient Temperature 5 C 130 C ambient temperature 25 C Temperature Uniformity lt 1 0 C Temperature Accuracy lt 0 5 C 37 C Temperature Fluctuation lt 0 5 C lt 25 min Crise from 30 C to 130 C 373x200x100 mm 403x200x100 mm 535x200x100 mm 14 7x1 87x3 94 in 15 9x7 87x3 94 in 21 1x7 87x3 94 in Weight 3 4 kg 7 5 Ibs 3 7 kg 8 16 Ibs 5 1 kg 11 24 Ibs Fuse Protector g5x20 F250V 2 5A F250V 2 5A F 250V 3 15A Caution The instrument shall be used from low to high temperature A Temperature Rise Time lt 20 min Crise from 30 C to 130 C Size LxWxH Declaration of Conformity We hereby declare under our sole responsibility that this product conforms with the technical requirements of the following standards CE EMC EN 61326 1 CE Safety EN 61010 1 CE Safety EN61010 2 010 UL 61010 1 CSA C22 2 NO 61010 1 ROHS2 0 2011 65 EU
8. cientific any part of the manual should not be duplicated reproduced or translated into any other languages MANUAL NUMBER 0000 849 0 12 1 2014 Original REV ECR ECN DATE DESCRIPTION By Thermo Scientific i Preface Do You Need Information or Assistance on Thermo Scientific Products If you do please contact us 8 00 a m to 6 00 p m Eastern Time at 1 740 373 4763 Direct 1 800 438 4851 Toll Free U S and Canada 1 877 213 8051 FAX http www thermoscientific com Internet Worldwide Web Home Page service led marietta thermofisher com Tech Support Email Address www unitylabservices com Certified Service Web Page Our Sales Support staff can provide information on pricing and give you quotations We can take your order and provide delivery information on major equipment items or make arrangements to have your local sales representative contact you Our products are listed on the Internet and we can be contacted through our Internet home page Our Service Support staff can supply technical information about proper setup operation or troubleshooting of your equipment We can fill your needs for spare or replacement parts or provide you with on site service We can also provide you with a quotation on our Extended Warranty for your Thermo Scientific products Whatever Thermo Scientific products you need or use we will be happy to discuss your applications If you are experiencing technical problems working together we will
9. ck whether the connecting wire of EX Open circuit of sensor buzzer alarms in a di di sound sensor is damaged and replace it Power supply fails to be connected Check power supply and connect it Fuse burned Replace fuse Display window is not turned on after switching on power supply Damage of the switch Replace the switch 4 1 buzzer alarms in a di di sound Use the external sensor without Put the external sensor correctly into the putting it into the module corresponding place of the module Temperature display does not conform to ensor is damaged or in poor 5 p p ay gt g p Contact supplier or factory actual temperature contact Caution The user is not allowed to open the housing of the instrument for inspection during the warranty period If any failures result from opening the housing for inspection contact Thermo Fisher Scientific A Sensor is damaged or the heat 1 blocker is damaged Contact supplier or factory The LCD shows Err code 0x3 and the Thermo Scientific 74 Section 8 Modular Block Accessories 8 1 Modular Block Accessories Wumsmax CS ECT For 25mm test tubes For 0 5ml test tubes For 96 well Elisa plate For mixed size test tubes 32 holes for 6mm test tubes 21 holes for 10mm test tubes For mixed size test tubes 18 holes for 1 5ml test tubes 10 holes for 2 0ml test tubes For mixed size test tubes 3 holes for 25mm test tubes 12 holes for 13mm test tubes 6 holes for 6mm te
10. d to power and or turned on is prohibited c Observe voltage power requirements Before the instrument is connected with the AC power source the voltage of the power source should be the same with the required voltage of the instrument a deviation of 10 is allowed The rated load of the power socket should not be lower than the requirements of the instrument d Ihe power cord The instrument should use the power line cord attached to it If the power line is destroyed it must be replaced but not be repaired The replacement should be carried out with the power line of the same type and same specification No items should be put on the power cord when the instrument is in operation Section 1 Safety e Connecting and disconnecting from to power source The user should hold the plug to remove from power source When connecting the plug user should make sure it has been fully plugged in when removing the plug do not pull the power line forcefully f Placement of the instrument This instrument should be fixed in a low RH and low dust place away from water source e g sink or water pipeline and the room should be well ventilated and free of corrosive gas or interference of strong magnetic field The instrument should not be placed in a wet or dusty location The openings on this instrument are for ventilation circulation and in order to avoid over heat of the instrument body they should not be blocked or covered When a sing
11. e first two 2 years component parts proven to be non conforming in materials or workmanship will be repaired or replaced at Thermo s expense labor included Installation and calibration are not covered by this warranty agreement The Technical Services Department must be contact ed for warranty determination and direction prior to performance of any repairs Expendable items glass filters and gaskets are excluded from this warranty Replacement or repair of components parts or equipment under this warranty shall not extend the warranty to either the equipment or to the compo nent part beyond the original warranty period The Technical Services Department must give prior approval for return of any components or equipment At Thermo s option all non conforming parts must be returned to Thermo Fisher Scientific postage paid and replacement parts are shipped FOB desti nation THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER WRITTEN ORAL OR IMPLIED NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY Thermo shall not be liable for any indirect or consequential damages including without limitation damages relating to lost profits or loss of products Your local Thermo Sales Office is ready to help with comprehensive site preparation information before your equipment arrives Printed instruction man uals carefully detail equipment installation operation and preventive maintenance If equipment s
12. ervice is required please call your Technical Services Department at 1 800 438 4851 USA and Canada or 1 740 373 4763 We re ready to answer your questions on equipment warranty operation maintenance service and special application Outside the USA contact your local dis tributor for warranty information Rev 0 9 13 Warranty Scope The above mentioned warranty does not apply to damages incurred by improper use and maintenance using under unqualified conditions unauthorized maintenance or modification Thermo Fisher Scientific does not provide any other warranty expressions otherwise and does not bear liabilities for business promotion under special circumstances Thermo Scientific 10 1 thermoscientific com 2014 Thermo Fisher Scientific Inc All rights reserved All trademarks are the property of Thermo Fisher Scientific and its subsidiaries Specifications terms and pricing are subject to change Not all products are available in all countries Please consult your local sales representative for details For the name of the authorized Thermo Scientific product dealer nearest you or any additional information contact us North America USA Canada 1 866 984 3766 866 9 Thermo www thermo com Europe Austria 43 1 801 40 0 Belgium 32 2 482 30 30 France 33 2 2803 2180 Germany national toll free 08001 536 376 Germany international 49 6184 90 6940 Italy 39 02 02 95059 434 254 375 Netherlands 31 76 571 444
13. help you locate the problem and chances are correct it yourself over the telephone without a service call When more extensive service is necessary we will assist you with direct factory trained technicians or a qualified service organization for on the spot repair If your service need is covered by the warranty we will arrange for the unit to be repaired at our expense and to your satisfaction Regardless of your needs our professional telephone technicians are available to assist you Monday through Friday from 8 00 a m to 6 00 p m Eastern Time Please contact us by telephone or fax International customers please contact your local Thermo Scientific distributor ii Thermo Scientific Thermo Scientific Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8 Section 9 Section 10 Table of Contents HII we 1 1 Maintenance cuoc x K K AERIS Oe ER irt eem se ta eee 2 1 urpis 3 1 Fealures eC CE 4 1 Preparation Work xx x K x x K K K K K x K K K cece eee eee eeeeeees 5 1 Operation Guidance ccc eee eee nennen nennen 6 1 Examination Before Start Up a a ee 6 1 viri dd PEN 6 1 Operation Instructions en se ae EE Rx e RENS 6 1 Failure Analysis and Troubleshooting 7 1 Modular Block Accessories e exe e x e x x K x K nenn nenn 8 1 Wiring Diagrama 2 42 socer ami de wea e rk CR ros 9 1 Warranty Information
14. into the program running S interface If the alteration of the program has not been saved yet the warning box will pop up File not saved data will be lost continue EM NM Press YES and the program will run in the changed form but the changes won t be saved Press NO to go back to the program setting interface The user can set 1 5 sections of the program Press to delete the corresponding section when there is only one section this step would be of no use Press E to add sections Choose the corresponding box to set the corresponding temperature and time Caution This instrument doesn t have cooling function If the user wants to set multiple sections set the temperature from low to high Otherwise the temperature will be very slowly decreasing while the blocks cool down Thermo Scientific 6 3 Section 6 Operation Guidance Operation Instructions Files saving interface continued Press BACK to go back to the program setting interface Press SAVE to save the file Press RUN to enter into the program running interface If the changed program has not been saved the warning box will pop up Choose File name and Password to set the file name and the password By Sem E pressing Figures from 2 9 quickly the input method T will be changed to English to BED set the file name Program running interface Press CAL to call for the temperatu
15. ld be no CAL and the temperature is unable to be adjusted Input the correct temperature into the box that pops out Caution a To ensure the accuracy of temperature the instrument should be calibrated after temperature stabilizes for 30 minutes b Calibrate the instrument with the qualified Grade II standard filled thermometer c Calibration point The middle hole of the heat block Pour paraffin oil into the well and soak the thermometer bulb Instruction During the operation of the instrument the temperature and the time should not be changed If it they should stop the program and enter into the setting interface to change them Listed files interface Press BACK to go back to the main interface Enter into the setting interface of the specific file in accordance with its name If the file has a password then enter into the password inputting interface Thermo Scientific Section 6 Operation Guidance Operation Instructions Password imputing interface continued Input the password into the box Caution If the password has been forgotten user can use 000000 to ROOT and then the file will be reset to the initial state the name of the file would not be changed Program setting interface Press BACK to go back to the listed files interface EUN KC 1080 X 00 01 hhmm Press SAVE to enter into the files saving interface Press RUN to enter
16. le set of instrument is used the interval between ventilation opening before and after the instrument and its nearest object should not be less than 25cm Also don t use the instrument on loose or soft surface or the air inlet of instrument bottom might be blocked Excessive temperature will impair performance or result in failure of instrument This instrument should not be used in location subjected to direct sun light The instrument should be kept away from hot gas oven and all other heat sources If the instrument is to be stored for a long time the power plug should be withdrawn and the instrument covered with soft cloth or plastic film to avoid entrance of dust The product is powered by connecting the mains plug to a standard socket outlet Always place the product in such a way that it is easy for the operator to disconnect the product from the mains supply Thermo Scientific Thermo Scientific g Explanation of symbols Attention read user manual before use Warning There is a sign of CAUTION HOT SURFACE ATTENTION SURFACE HOT on the instrument The metal part module near the sign should not be touched with any part of the body when the instrument is operating in a high temperature state or just finished operation to avoid burns A Alternating Current Protective Conductor Terminal Caution In any of the following cases immediately turn off the power supply withdraw the power plug from the power socket contact the
17. re adjustment EN 21314 interface If the external TEMP EE 105 0 037 0 sensor is being used then QIME tnn ETRE 00 01 00 01 there would be no CAL and the temperature is unable 038 1 01 00 00 hh mm ss Total time 00 00 18 hh mm to be adjusted Refer to ser PAUSE J OP Single Running Interface Press SKIP to skip to the next section If it is the last section the interface of asking you whether to stop the program will appear Refer to Single Running Interface Press PAUSE the program will be paused and the temperature will be maintained to the set temperature and the pause interface will pop up SS Program is Paused Press STOP the cancel interface will pop up Refer to Single Running Interface Instruction During the operation of the instrument the temperature and the time should not be changed If needed stop the program and enter into the setting interface to change them 6 4 Thermo Scientific Section 7 Failure Analysis and Troubleshooting This chapter details possible failures of this instrument and possible causes with troubleshooting Failure Analysis and Troubleshooting Contact Thermo Fisher Scientific The LCD shows Err code 0x1 and the DM Check whether the connecting wire of uon Short circuit of sensor buzzer alarms in a di di sound sensor is damaged and replace it 3 The LCD shows Err code 0x2 and the oe Che
18. st tubes For mixed size test tubes 30 holes for 0 5ml test tubes 20 holes for 0 2ml test tubes For 15 ml flat bottom test tubes For 50 ml flat bottom test tubes For 15ml conical bottom test tubes For 50ml conical bottom test tubes For 96 well none skirted PCR plate For 96 well half full skirted PCR plate Temperature Probe PT1000 32421 40 3 8 5 5 1 1 1 4 1 4 1 1 888701 888701 888701 888701 888701 888701 888701 0 01 2 3 4 6 7 8 88870109 88870110 88870111 88870112 M uli 30 20 88870115 Thermo Scientific zum gen 979 919 RIE U ES N N S amp briw ezar LON 3 X gen va EHR ES x oe Ey Hex ven sen ES QN X ren 3 NO carr So XL tet E Ku rr en Ir 8 m CL37INI S ges 3 Kr d rest NO ar elt y OXL N OL zear NA S XOL ve csb65s6b6bs BI Xn WL eg E Ux S VEADSCOV S 88 5 0L rHAINCECIH DE ven 7 919939 a ZHOLIMS eu BT y e aA v EE D y ZR DM WH 9 1 Thermo Scientific Section 10 Warranty Information THERMO FISHER SCIENTIFIC STANDARD PRODUCT WARRANTY The Warranty Period starts two weeks from the date your equipment is shipped from our facility This allows for shipping time so the warranty will go into effect at approximately the same time your equipment is delivered The warranty protection extends to any subsequent owner during the first year warranty period During th
19. tartup turn off the power source immediately and contact Thermo Fisher Scientific A Sta rt Up Press the power switch and the instrument will be powered on The LCD screen of the operation panel will show the main interface Operation Instructions The main interface Press Single point set to enter into the single setting interface Single setting interface Press BACK to go back to the main interface wo BEE Press RUN to enter into me pgg the singl i interface e iie e S interface Ex 718 9 Press Temp to set the una OOO pim eo o clr temperature Back Casa Press Time to set the time Instruction There is limitation for temperature and time setting The setting temperature range is 15 135 C the time range is 099 59 and oo Thermo Scientific 6 1 Section 6 Operation Guidance 6 2 Operation Instructions continued Single running interface Press STOP and the interface of asking you whether to stop the program will appear 100 0 x 10 00 inm En nun 039 2 x 10 00 00 hh mm ss Total time 00 00 15 hh mm Stop program lt NM Press YES to stop the program and to go back to the main interface Press NO to go back to the single running interface Press CAL to calibrate the temperature adjustment interface If the external sensor is being used then there wou
Download Pdf Manuals
Related Search