Strand End User Manual
Contents
1. The selected tile will turn green NOTE The green tile indicates that the remote drone is active on the network Mirs ibis 2114 Ars 2114 xs 2116 i Dispatch Command add cameras to Remote Drone Double click within the green tile and a blank matrix will appear on the remote drone workstation strand Page 128 gt gt Default Map Camera 3 Change Camera Setup Screen Mode Return IT Support 877 877 7110 Dispatch Command Access Remote Master from Remote Drone To setup access to a Remote Drone from a Remote Master Right click within a blank tile Select Change Camera Select Remote Displays Select the name for the remote drone The selected tile will turn green NOTE The green tile indicates that the remote drone is active on the network strand User Guide Page 129 Matrix Dispatch Command Video Wall To create multiple matrix displays from one monitoring station LILL LLP UJ Verify the monitoring desktop PC has correct number of monitor attached in the PC s Display Settings Launch the Dispatch Command Application Right click on Dispatch Command Select Screen Mode Click on Full Screen 1 to move the Matrix to Screen 1 To support a second third or fourth monitor launch the Dispatch Command Module again Right click on the Dispatch Command Select Screen Mode Click on Full Screen 2 to move the Matrix to Screen 2 Repeat to add St2. images System Status Click the time and date from the alarm log list a Emergency Lockdown A preset time period of archived images of the a Configuration Module alarm incident will appear strand User Guide Page 139 Analytic Diagnostics Camera Check Camera Check Camera Check Camera Check provides a static snapshot view of all cameras in the system Click Admin Diagnostics gt Click Camera Check gt Camera images grouped by site with a map of the site in the top left hand corner of each camera grouping To view alive image click on the image tile NOTE Static snapshot images are refreshed every 60 seconds If a tile is blank with a red box around it the camera is not recording strand Page 140 IT Support 877 877 7110 Analytic Diagnostics System Status Phase Capturing Build 1999 0 Status as of Fri 03 Jun 2011 16 24 24 CDT Show Storage Default Map Camera 2 OK OO Default Map Camera 3 ok 10 0 0 105 Default Map Camera 4 OK CS Tomes System Status System Status provides current analytical diagnostic information for the system and cameras including NVR Status capturing not capturing gt Software build Status date y IP Address y Camera Name Camera State Error Message Rate FPS U Y uyy Expected FPS strand User Guide Page 141 Special Features Virtual PTZ IE9 IK WB16A PTZ Controls Strand virtual PTZ controls al
3. 4 Adding Deleting Bookmarks Option 2 Bookmarks may also be added and deleted by clicking Admin Preferences Maintain Bookmarks A list of cameras maps are displayed in the viewing area Select the box under the bookmark column to add or delete a camera map strand User Guide Page 113 Matrix Command Module strand Default strand Matrices Users are able to create and save customized matrices To view a previously created Matrix Click on the Matrices button on the toolbar gt Click on the name of the Matrix from the list gt The Matrix will appear in the viewing area see above strand Page 114 IT Support 877 877 7110 Matrix Create Add Cameras Create a New Matrix Future reguests will be directed to Default Maintain Matrix Defaut gt Maintain Matrix gt gt gt t Map Camera 3 Show Toolbar gt Add Bookmark Remove Bookmark Save to Matrix Default strand Create a new matrix specific to the user login Click Admin Preferences Maintain Matrix Type the name of the new matrix in the space provided and click Maintain Matrix The message Future reguests will be directed to name of Matrix will be displayed Users are able to then add cameras to the matrix Add camera s to the matrix Select the camera to be added to the Matrix Open the camera image in the viewing area user must be in Live view mo
4. 8 Active Sessions 8 Alarm Summary 8 Camera Check System Status a Emergency Lockdown Configuration Module IT Support 877 877 7110 Configuration Module Configuration Module allows authorized system administrators access to installation and system setup functions Click Admin Diagnostics Click Configuration Module Login with user ID and password SEE CONFIGURATION MODULE MANUAL SSL Error C fi amp bbtt s 10 0 0 99 asp login asp PLEASE ENTER USERID AND PASSWORD User Id Password E strand configuration module powered by strand User Guide Emergency Lockdown 8 Login History 8 Active Sessions 8 Alarm Summary a Camera Check n System Status 8 Configuration Module Current Level 12 New Level 12 Page 147 Emergency Lockdown Emergency Lockdown allows the primary system administrator to quickly lock out any or all users All users with priority levels less than the administrator specified priority level will be forced to leave the system and will not be allowed access Emergency Lockdown gt Click Admin Diagnostics gt Click Emergency Lockdown gt Enter the New Level in the space provided gt Click Submit Change Anew Priority Level has been established strand Page 148 IT Support 877 877 7110 strand strand 877 877 7110 www strandusa com
5. Archive Scene Enhancer Live and Archive Scene Enhancer allows the user to zoom in to a specific area on a live or archived image while maintaining full scene viewing capabilities Select the camera to be viewed Select Live or Archive under View on the tool bar Once the image is in the viewing area right click on the image Click Show Zoom Area The area outlined in red will be displayed in the Scene Enhancer area to the left of the full image gt Use the mouse to control location of the enhanced area of the image Use the mouse scroll wheel to zoom in and out strand Page 144 IT Support 877 877 7110 Special Features Scene Enhancer Scene Enhancer Live and Archive To hide the Scene Enhancer feature gt Right click on the image Click Hide Zoom Area strand User Guide Page 145 Special Features Save Single Image Save Singe Image Live Archive Save a single image to the local drive gt Select the camera Choose the image to be saved gt Right click on the image gt Click Save Unsigned Image 7 Current Marketing Ma 4 Digital 7 Downloads Shortcut Hausman Photos c LOGOS File Name Late Employe resi Save Single Image Live Archive Save the image to the desired location NOTE This is not an encrypted image and can be enhanced or modified using software such as Adobe Photoshop strand Page 146 Configuration Module Login History
6. Login History Analytic Diagnostic data is available for Login History 8 Active Sessions Active Sessions gt Alarm Summary 8 Alarm Summary gt Camera Check gt System Status a Camera Check a System Status strand User Guide Page 137 Analytic Diagnostics Login History Date Host Activi a 2009 11 17 T100dnalest 120 Login History allows users to retrieve data on user 2009 11 12 T100dnaTest 1 login history 2009 11 14 T400dnaTest 1 2009 11 09 T100dnaTest 2 1 gt Click Admin Diagnostics Login History 2009 11 08 T100dnaTest 2 200 9 44 0 3 T100dnaTest 2 Alist of dates will appear that indicate the days 20 0 09 11 02 T100dnaTest 11 J it Gr accessed The following 2009 10 29 T100dnaTest 7 i Se tne el mam se En ee oe Ea Se 200 0 os a 2009 10 28 T100dnaTest 6 Login Date 2009 10 26 T400dnaTest 1 s E a ee P semen ann mm mn n ee 2009 10 23 T100dnaTest 1 a Host IP address 2009 10 21 T100dnaTest 3 2009 10 20 T100dnaTest 1 Activity number of users per date 2009 10 19 T100dnaTest 1 Sa N gt To review login history for a specific date click on that date Login Time Host Remote IP lUser Logout Type Duration 2010 08 30 14 43 52 Columbia Office 75 131 45 65 remote demo demo100 signoff 00 06 03 2010 08 30 12 58 24 Columbia Office l66 156 70 57 remote
7. User ID strand Type in the Password Pease Enter Usand and Password gt Click Login 1 User ki Password Login kam PLEASE ENTER USERID AND PASSWORD User Id Password strand Tine Splash Page After the initial login gt The Strand Splash page will be shown in the viewing area The toolbar will be displayed to the right of the viewing area strand Page 102 Toolbar strand IT Support 877 877 7110 strand Admin View Express Maps BookMarks Matrices signoff Toolbar The toolbar offers the following options Back arrow go to the previous screen location Admin various user administrative tools View choose to view live or archived images Express search for cameras and maps Maps provides map representation of each site BookMarks bookmark cameras maps Matrices create user specific matrices LL YU Uv UY SignOff sign off the system User Guide Page 103 Change Skin 8 Change Password hase Si User Preferences Change Skin Classic gt Choose between Orange and Classic skins Click Admin Preferences Change Skin Click Classic to choose the gray and blue color scheme default skin Click Orange to choose the black and orange color scheme User Preferences Change Password User I
8. gt gt gt gt y Dispatch Command setting a remote master To set a workstation as a Remote Master access the workstation that will be used as the Remote Master Right click on the matrix Hover over Setup Click Remote Master Select Enabled a check mark will appear in the box A Port number will be displayed in the space provided Click OK Dispatch Command The Master Matrix will appear in full screen mode and the tiles will be gray in color strand Page 126 IT Support 877 877 7110 Matrix Dispatch Command Dispatch Command setting a Remote Drone To set a workstation as a Remote Drone access the workstation the will be used as the Remote Drone Log into Dispatch Command gt Right click on the Matrix Hover over Setup gt Click Remote Drone Remote Drone Dispatch Command Drone Settings gt A Port Number will appear in the space provided Click Enabled Enabled Enter the Name of the Matrix Local Name gt Input the IP Address of the workstation that is set as the Remote Master IP Address Click OK 3 y strand User Guide Page 127 Matrix Dispatch Command Dispatch Command create Remote Master matrix To setup access to a Remote Drone from a Remote Master Right click within a blank tile gt Select Change Camera gt Select Remote Displays Select the name for the remote drone
9. gt gt Hover over Resolution gt File gt Change Camera Renove Tie Screen Mode gt Remove Row Click the desired resolution for the tile Add Tile Exit Copy Row All Tiles 240x180 Remote Master 320x240 Remote Drone 384x288 480x360 640x480 strand User Guide Page 121 Dispatch Command Matrix Add Tile Copy Row Change Camera Setup Screen Mode Exit M b Remove Tile Remove Row Copy Row All Tiles Resolution gt Remote Master Copy Row Dispatch Command add tile To add tiles to a row on the matrix Right click in the area you wish to add a tile Hover over Setup Click Add Tile New tile will be added to row Dispatch Command copy row To copy the setup of an entire row Right click on a tile in the row to be copied Hover over Setup gt Click Copy Row New row will be added to Matrix strand Page 122 IT Support 877 877 7110 Dispatch Command Matrix Remove Tile Row File b Change Camera SaeenMode gt Remove Row Add Tile Exit Copy Row All Tiles Resolution b Remote Master strand Dispatch Command remove tile To remove a tile Right click on the tile to be removed Hover over Setup gt Click Remove Tile gt Tile is removed from row Dispatch Command remove row To remove an entire row of tiles Right click on one of the tiles in the row to be removed Ho
10. Strand User Manual strand This User Manual is a detailed manual to assist users with the total functionality of the Strand NVR Software Strand User Manual v2018 Strand User Guide Version 2018 Introduction Strand User Manual The Strand Manual guides users through Strand s IP video surveillance software Please visit the Strand website at www strandusa com for more information Strand User Manual Contents Strand User Manual This manual provides a detailed guide for all User functionalities Software Requirements JAVA Download 701 URL Procedures ini minmumam jak mitmeks m 701 Login Procedures nvvennennnnnennennnnnnnne enn nnannena 702 Toolbar Menu AEGSE AEA ATA 703 Admin Preference Menu nnnnennnnenennnnenennnenennna 703 Change Password nnninnnnneennnnnnnnennnena nan 704 Add Delete Bookmarks 0nnnnenneennnnennennnnnennena 705 Add Delete Matrices nmmmeernnnennen ennem 706 708 Matrix Strand Viewer rrnnnrrnnnnnnnnrnnnnrnnnnnnnnvnnnrnnnnnnnnee 709 710 Dispatch Command enrnnnnennnnnnn ann nnnanna 711 725 BET 01 0 4 metres sl saicccniseentiseaiseodecsieseuduenuidesesesiecessisenaenet 726 730 View Live Images rrnrnnnrnnnnnnrnnnnnnrnnnnnnnnnnnnrnnnnnnrnnnnnnrnnnnnsene 731 PIZ Cob sg ssicdsiotaesansncdasepevnnesan
11. atellite NVR Site locations Click on the site and the pin icon will turn red gt Satellite diagnostic status information will appear Proceed to the Satellite NVR Site by clicking on the pin icon Q1Wireless Video Satellite Navigator gt The remote Satellite NVR Site is now accessed gt Location of the site is noted in action bar strand User Guide Page 109 Maps Satellite Navigator Satellite Navigator vew gt Browse the Satellite NVR Site using the tool bar lt lt and other navigation features Maps Click Return at the bottom of the tool bar to return Q1W Exterior to the Navigator site Q1W Interior BookMarks Matrices System Monitor Summary 3 WM 160 18070 Columbia Omo 5 JENTE notextermaly synchronized aa 18070 CyberStrand 1 21 07 1686 0 la status file is stale 196 day s old Te NTP not externally synchronized 209 ka Satellite Navigator To view comprehensive System Monitor Summary diagnostics through the Navigator NVR go to Admin Diagnostics gt Select the desired satellite site to view an individual Satellite NVR diagnostics strand Page 110 IT Support 877 877 7110 Maps Satellite Navigator Phase Capturing Build 1807 0 Status as of Fri 24 Sep 2010 12 24 52 CDT Camera Name Message Rate FPS Expect FPS Usage GB Auota GB Quota 192 m 109 Columbia Office A
12. be removed from the Matrices button on the toolbar User Guide Page 117 Matrix Dispatch Command Module dispatch command powered by strand Change Skin Preferences Change Password Diagnostics Maintain Bookmarks Maintain Matrix Strand Viewer e Dispatch Command dispatch command powered bry sirar Please Enter Userld and Password User ld admin Password a00nnseen Dispatch Command Module Dispatch Command is an administrative level 24 7 monitoring station Matrix To access the Dispatch Command Module gt Select Admin Preferences Dispatch Command Dispatch Command log on A login screen will appear in the viewing area Log on to Dispatch Command with the same User ID and Password that is used in the main login area NOTE User is able to access Dispatch Command as assigned by system administrator strand Page 118 IT Support 877 877 7110 Dispatch Command Matrix Add Cameras File gt Change Camera b Screen Mode gt setup Exit strand Dispatch Command Default Matrix gt Upon login a default matrix will be shown NOTE Command Module toolbar functionality is not available in Dispatch Command Dispatch Command add camera to Matrix Right click on the tile camera image is to be added gt Click Change Camera gt OR left click on the tile User Guide Page 119 Dispatch Command Matrix Add Gameras pr Admin B
13. ccounting Not Responding 0 00 1 00 0 00 50 0 192 168 1 107 Columbia Office Conference room loK 1 00 1 00 75 00 50 0 14 406 192 168 1 101 Columbia Office Exterioreastview OK 4 00 4 00 74 99 50 0 14 707 192 168 1 36 Columbia Office Marketing office DEAD Not Responding 0 00 1 00 0 00 50 0 14 0 192 168 1 100 Columbia Office Storage HTTP Camera Gave 404 0 00 200 0 00 50 0 14 0 Totals 5 Cameras 149 99 250 0 4113 Satellite Navigator Diagnostics from the selected Satellite NVR Site will be displayed strand User Guide Page 111 BookMarks Camera 2 Camera 3 Default Map BookMarks BookMarks allows users to bookmark specific cameras or maps gt Click BookMarks on the toolbar Click on the camera map from the list and the image will be shown in the viewing area strand Page 112 IT Support 877 877 7110 Add Delete Bookmarks SEE OmeelEvienar past ua nA Xterior east view Bookmarks Users are able to add or delete cameras maps as bookmarks These are saved as user specific bookmarks Adding Deleting Bookmarks Option 1 gt Open alive view image of the camera map to be bookmarked Right click on the action bar at the top of the image gt Select Add Bookmark to add the camera map gt Select Remove Bookmark to delete a camera map ld Bookmark Default Map e Default Map Camera 1 Default Map Camera 2 fa Default Map Camera 3 e Default Map Camera
14. ceeneadustacnamenedesnosesans 731 732 Scene Enhancer rrnnnennnennnnnnnnnnnnnenni 733 734 Archived Images nmnnnernnnenneennnnennenn nan 735 739 View Multiple Archive Images Simultaneously 740 741 Save Unsigned Image nrnnnnnnnnnnenni 742 743 Express Camera Floorplan Search mnnn 744 ME 6 811015 E MEETER EE RE 745 746 Bookmarks and Matrices nnninennnnneennnane annan 747 Satellite Navigator errrnneereneeneeea 748 752 Page 100 IT Support 877 877 7110 Java amp URL Procedures Java Download Update Instructions Jaren in Acion JAVA YOU DOWNLOAD TO D AVI gt Open the web browser The latest version of Java is necessary in order to fully utilize the Strand software To download Java gt Type in the address line http www java com gt Click Free Java Download Follow instructions http 10 0 0 99 asp MapMain 2 Most Visited http www strandusa Getting Started Latest Headlines Launching Java Client URL Procedures Type in the organization s dedicated IP Address in the web browser URL box User are routed to the Strand Login page strand User Guide Page 101 Login Secure Login Users login via the Internet through a Secure Sockets Layer SSL session gt Type in the
15. d admin Password lannenenen New Password lannenenen Verify New Password lannenenen 7 gt Change a user password Click Admin Preferences Change Password User ID name will appear in the space in the top box Type in the current password in space provided Type in New Password in space provided Retype New Password in the Verify New Password space provided Click Set Password strand Page 104 IT Support 877 877 7110 Viewing Images strand Default Map Camera 3 C Archive vi Live View Live Images The Strand Command Module defaults to Live mode upon login To manually select Live View Click View on the toolbar Click on the box next to Live strand User Guide Express Page 105 Express Locate cameras or maps by utilizing the Express search tool User is able to access cameras maps as assigned by system administrator Click on the Express button in tool bar Id short Description Default Map Default Map Camera 1 Default t MapiCamera 2 2 Camera 2 Camera 3 Default a 4 Camera 4 Express To view a list all cameras maps gt Place the cursor in the search field and click Enter gt Click on camera map to be viewed To view a list specific cameras maps gt Type in the name ora portion of the name of the camera map click Enter gt Click on camera map to be viewed gt Image will be displaye
16. d strand Page 106 Maps l Maps Default BookMarks strand 09 24 1418 03 Ra IT Support 877 877 7110 Maps Locate and view map s User is able to access maps as assigned by system administrator Click Maps on the toolbar gt A list of the maps will be displayed Click the name of map to be viewed Maps Fixed and PTZ Icons Orange icons on the map indicate camera locations gt Triangular icon represents fixed cameras Circular icon represents PTZ cameras gt Holding the cursor over the icon provides a live Snapshot View of the camera image Click on the image to retrieve a full size image User Guide Page 107 Maps Satellite Navigator Always Enterprise Satellite Navigator NOTE The Satellite Navigator feature is not engaged on all systems The System Administrator will verify if the system is set up as an Satellite Navigator system amp mavigator Satellite Navigator Log in to the Navigator NVR Site using Strand ID and password Select Maps on the tool bar Select the desired map Move the cursor to the Satellite Site to be accessed gt A highlighted box appears with the selected Satellite Site Click on the highlighted box to select the remote location strand Page 108 IT Support 877 877 7110 Maps Satellite Navigator Satellite Navigator Icons in the form of a pin will appear on the map designating the S
17. de Right click in the action bar Click Save to Matrix Name of Matrix The name of the new matrix will appear under the Matrices button on the toolbar after the first camera is added to the matrix The number of camera images on each user specific matrix is only limited by monitor size User Guide Page 115 Matrix Alter Existing Matrix Change a Matrix Continue to add images to the Matrix until the desired matrix has been created Adjust Matrix View The tiles or images within the matrix can be repositioned or resized gt To move a tile within the matrix simply hold down the cursor within the name bar of the tile and reposition on the matrix gt To resize place and hold down the cursor in one corner of the tile and move until reaching the desired size NOTE Tiles will return to default setting when matrix window is closed strand Page 116 IT Support 877 877 7110 Matrix Delete Image Delete Matrix Show Toolbar gt Remove Matrix strand Delete an image from the Matrix Click Matrices on the tool bar Click on desired Matrix Right click on the tile to be deleted Click Remove Click the name of the Matrix to refresh Image will be deleted Delete an Existing Matrix Click Matrices on the tool bar Click on desired Matrix Right click on action bar at the top of the screen Click Remove Matrix Matrix will be deleted and the name will
18. demo demo100 timeout 00 21 37 2010 08 30 11 37 24 Columbia Office 69 242 139 203 remote demo demo100 signoff 00 06 52 2010 08 30 11 14 05 Columbia Office l69 242 139 203 remote demo demo100 timeout 00 21 56 Login History Username Login History provides data per date on the Logout Type Signoff timeout following gt Duration the user was on the site gt Login Time Use the back arrow or click Diagnostics to return Host to the menu options Remote IP from which the user logged onto the site strand Page 138 IT Support 877 877 7110 Analytic Diagnostics Active Sessions User Remote IP Priority Level Host admin 1 192 168 1456 96 188 Columbia Office admin 1192 168 1 46 98 38 Columbia Oliice Active Sessions gt User ID Active Sessions allows users to retrieve data on IP address the user is logged on from users currently logged into the system a User s Priority Level gt Click Admin Diagnostics User s Access Level gt Click Active Sessions ee The Host server NVR Data is displayed for each user currently logged into the systems including Alarm Summary w Login History To retrieve images from cameras set with alarm functions 8 Active Sessions gt Click Admin Diagnostics 8 Alarm Summary gt Click Alarm Summary 8 Camera Check l l Click the specific camera from which to retrieve
19. low users to Pan Tilt Zoom cameras remotely gt Selecta PTZ camera PTZ controls will appear to the right of the viewing area gt Select PTZ Control by clicking on PTZ Control button gt Change camera direction by clicking on a directional button in the PTZ controller gt Change the PTZ zoom rate by clicking the plus or minus button next to Zoom gt Change the PTZ pan tilt rate by clicking the plus or minus button next to Rate NOTE The rate number is indicated in the center of the directional arrows strand Page 142 IT Support 877 877 7110 Special Features Virtual PTZ gt gt z PTZ Control presets Preset camera positions can be set with a PTZ camera Move the camera to the desired view Click the PTZ presets button Click the Preset Mgmt button Name the Preset in the space provided Click apply The location will be saved under the PTZ Presets button These presets are not user specific PTZ Control Direct Zoom Quickly pan tilt or zoom to a location by using the mouse Locate the focus area within the image Using the mouse draw a box around the area and right click The camera will quickly zoom to the area Use the scroll button on the mouse to zoom in or out from the area NOTE This is a camera specific function not all cameras have this feature strand User Guide Page 143 Special Features Scene Enhancer Scene Enhancer Live and
20. op of the image figure 1 1 Begin record start saving a video clip to local drive 2 Continuous backward 3 Backward frame by frame 4 Stop Pause 5 Forward frame by frame 6 Continous forward 7 Rate Event Wrap gt Rate move the arrow up to view images at a faster rate and down to view images at a slower rate strand Page 132 IT Support 877 877 7110 View Archived Images SG G 0G amp amp S lt ET Beqin Record figure 1 End Record figure 2 Save Archived Images to local drive Once event to be saved on local drive is located Click the Begin Record button figure 1 Select a location to save the clip Name the clip Save file saved clip recording begins U U Uu yy Click the End Record button to end the saved clip figure 2 y Video clip is now saved to local drive strand User Guide View Alarms Besintime 2011 Jun 03 EndTime Search BeginTime 2011 Jun 03 EndTime Search Page 133 To search archived alarms gt Select the camera gt Click Show Alarms Click desired date and time gt Video segment will be shown Instant Search Search a camera for the most recent available archive gt Select the camera Do not change begin or end time gt Click search gt Video segment for the most recently available archive approximately within the last 2 minutes strand Page 134 IT Support 877 877 7110 S
21. rand Matrix Displays to the additional monitors Windowed Full Screen 1 strand Page 130 Archived Images strand i Archive Live BeginTime 2011 Jun 02 09 13 CDT Endtime 2011 Jun 02 17 14 CDT Search Show Alarms BeginTime 2011 Jun 02 09 13 CDT June v 20115 Hour A EEE JEL gt og cancer strand IT Support 877 877 7110 Archived Image Retrieval To retrieve and save archived images gt Click View Select Archive check will appear in box There are two methods to retrieve save archived images Option 1 Retrieve images from a single camera Select camera Option 2 Retrieve images from multiple cameras Select desired matrix NOTE Multiple archived images can be viewed simultaneously but must be saved individually Archived Image Retrieval gt End Time Click End Time and select the variables month day hour minute second AM PM gt Begin Time Click Begin Time and select the variables month day hour minute second AM PM gt Click OK to begin the archival retrieval NOTE It is not mandatory to select an End Time this may be left blank User Guide Page 131 View Archived Images 2 3 4 5 6 7 Begin Record AOS D a ww figure 1 O Every 1 Minutes O Every 10 Seconds figure 2 Archive Control Buttons The archive image will be shown in the viewing area Control bar will appear at the t
22. trand Viewer strand Strand Viewer To view archived video clips that have been saved to local drive Click Admin Preferences Strand Viewer Click Run to open Java The Strand Viewer will appear in the viewing area as shown below Click Open from the control bar at the top left of the viewer to receive a list of files NOTE Control bar on the Strand Viewer is identical to that in the Archive area with the exception of the Open button The Strand Viewer is available for download at http www strandusa com site12 support resources viewer php strand User Guide Page 135 Strand Viewer Camtasia Studio E My PSP Files eFax Messenger 4 3 7 outlook calendar ItsDeductible2006 C3 outlook contact Y may2 mjpa J Morgan s Folder 7 TurboTax test mipa My Data Sources 7 Updater File Name Man Stealing Truck mjpg Files of Type Strand Video Clip mipg M Open Sand video Ci Strand Viewer Open Video Clip Browse to locate the locally saved archive video clip saved as an mjpg file Click on the desired file name Click Open Strand Video Clip Admin Preferences Strand Viewer Video clip will open in viewing area Browse the saved clip by using the control bar strand Page 136 IT Support 877 877 7110 Analytic Diagnostics Analytic Diagnostics strand To retrieve System analytic diagnostic data e gt click Admin Diagnostics Analytic Diagnostics a
23. uilding a E E E E fe Admin Camera 1 Admin Camera 10 Admin Camera 11 Admin Camera 12 Admin Camera 14 Admin Camera 15 Admin Camera 2 Admin Camera 3 Admin Camera 4 dmin Camera 13 a em a CSR Mu lis Dispatch Command add camera The list of floorplans maps will be displayed as folders Click the name of the floorplan map folder to display the list of cameras within that building or site Click on the camera name to highlight the camera Double click or click OK to add it to the selected tile Dispatch Command add camera The camera image will appear in the chosen tile strand Page 120 IT Support 877 877 7110 Dispatch Command Matrix Toggle Resolution Dispatch Command toggle images LI Admin Building To toggle between several cameras in one tile for 6 Admin Camera 1 specific time segments Admin Camera 10 Admin Camera 11 MAdmim Camera 12 Left click on desired tile Ld Admin Camera 13 e gt Select the first camera to be displayed in the tile Press and hold CTRL to select cameras to be Admin Camera 15 toggled i Mbala Mamaa P Enter the delay time in seconds in the Delay Ok Cancel Delay 5 space provided to indicate the time rate the cameras should alternate gt Click OK gt The camera images in the tile will toggle Dispatch Command change image resolution tile size gt Right click on image Hover over Setup
24. ver over Setup gt Click Remove Row gt Row is removed from Matrix User Guide Page 123 Dispatch Command Matrix Save Retrieve Matrix de Local Dispatch Command save a matrix E Desktop To save the current Matrix configuration Ji Computer L Local Disk C gt Right click on the Matrix M Windows Hover over File L ae Click S A A cana gt ick Save As i Local Choose the location to save the Matrix Name the Matrix gt Click Save Dispatch Command retrieve saved matrix To retrieve the file from the saved location Log into Dispatch Command gt A default matrix will open upon login gt Right click on the screen Ctra ral E Hover over File Lilies Click Open Fle k Save Locate the saved Matrix Change Camera Save s gt Click to open Senap i Saved Matrix will be displayed Screen Mode b Exit strand Page 124 IT Support 877 877 7110 Dispatch Command Matrix Remote Master Dispatch Command Remote Master and Remote Drone Remote Master Master workstation that controls configuration of matrices to be saved and forwarded to remote workstations Remote Drones Remote Drone Remote workstations that receive matrices from master workstation NOTE Remote Master and Remote Drone workstations must be connected to the same network strand User Guide Page 125 Dispatch Command Matrix Remote Master
Download Pdf Manuals
Related Search