Users Manual - About Projectors
Contents
1. THE BIG EMUTERTAMER Hi welcome to the MantaRay User Guide Please take the time to read through the Important Safety Information on the following pages prior to experiencing the nff of MantaRay What is nff nff co Net Fun Factor to the Power of Infinity MantaRay is a unique and stylish portable entertainment unit which allows you to immerse yourself in a large image on your wall or screen It is a video projector with a series of enhanced features designed specifically for your enjoyment at home MantaRay rocks the home entertainment experience MantaRay has a stack of applications It is fully compatible with all games consoles DVD players VCR s and cable TV set top boxes MantaRay also has television reception capabilities which enables it to be used as an independent TV You don t need a science degree to operate MantaRay just plug and play Clever design has resulted in user friendly functionality with an emphasis on safety If you require further information visit Enjoy It won t be hard For best viewing a 5m diagonal image is recommended Disclaimer Every effort has been made to ensure that the details in the User Guide are accurate at time of printing Introducing MantaRay Important Safety Information Package contents Parts amp connections Set Up amp Use Instructions Using MantaRay for Television reception with an external video source DVD player2. games console VCR VCD player satellite or cable TV digital still camera or video camera Air filter replacement instructions Lamp replacement instructions Troubleshooting checklist Technical specifications Warranty registration Page 2 Page 4 Page 8 Page 9 Page Page 12 Page 16 Page 18 Page 19 Page 20 Page 23 Page 24 CAUTION TO ENSURE PERSONAL SAFETY OBSERVE THE FOLLOWING IMPORTANT SAFEGUARDS REGARDING THE USE OF THIS UNIT I Read Instructions All the safety and operating instructions should be read before MantaRay is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Observe Warnings All warnings on the unit and in the Set Up amp Use Instructions should be observed and adhered to 4 Follow Instructions The Set Up amp Use Instructions should be followed at all times 5 Operating Surface Always set up MantaRay on a stable and secure surface If the surface is unstable the unit may fall and be damaged 6 Power Sources MantaRay should be operated only from the type of power source indicated on the marking label and as defined in the User Guide 240V 50 60 Hz If you are not sure of the type of power supply to the place of use consult your local power company When the unit is not in use for a long period of time disconnect the power cord from the AC outlet 7 Power Cord amp Connector Lead Protection Av
3. remove the lens cap prior to use When MantaRay is not in use re fit the lens cap 14 Replacement Parts Only use original manufacturer s replacement parts as the use of non original parts may damage MantaRgy and will void the warranty 15 High Brightness Light source Do not shine projector light directly into the eyes be especially careful that children do not stare directly into the beam of light 16 Accidental Damage Requiring Service Please refer to the Troubleshooting checklist accompanying this User Guide for all information regarding damage to the unit 17 Servicing The only MantaRay components that you should attempt to change are the lamp and air filter All other servicing requirements must be carried out by an authorised MantaRay service agent In the event of a fault do not attempt to service the Mantakay or disassemble this unit as opening or removing covers may expose you to dangerous voltage or other hazards It will also void the warranty Simply unplug the unit and refer all servicing enquiries to O Freecall 1800 422 877 Australia only www mantaray net au 18 Cleaning Unplug MantaRay from the wall outlet before cleaning Use a damp cloth only for cleaning external surfaces Do not use liquid cleaners or aerosol cleaners 19 General Use MantaRay is designed to be tilt adjusted to an angle of 30 degrees Under no circumstances should you place anything underneath the front of the b
4. turn the tilt adjustment thumbscrew on the neck of the unit Ya turn anti clockwise Whilst holding MantaRay at the required image height re tighten thumbscrew to lock unit in position NOTE Do not over tighten the tilt adjustment thumbscrew e If headphones are required plug headphones into the headphones audio out socket designated by a headphones symbol on the base of MantaRay Page Il oy TCE amp The best television reception will always be via an external antenna socket If you do not have access to an external antenna socket a telescopic antenna has been supplied Initial Set Up Place MantaRay on a flat level surface facing a wall or a screen 2 Insert power lead into MantaRay base 3 Plug other end of power lead into mains power outlet and turn switch on at the wall 4 Remove the lens cap 5 Insert the supplied telescopic antenna into the antenna socket and extend for TV reception NOTE If a connection to an external antenna is available this will provide the best reception Simply attach an RF lead not supplied to the antenna socket of MantaRay Attach the other end to the external antenna socket 6 Turn on the power switch located on the base of MantaRay indicated by having the hyphen symbol depressed You may need to tune your MantaRay for television reception in your own region MantaRay is controlled by the use of 3 buttons on the back of the fin Press
5. OUR Refer to Image Adjustments above to adjust height of the image Mains power outlet must be 240V 50 Hz Page I7 l Top vent release slot 2 Top vent 3 Air filter Replace air filter each time you replace the lamp To replace the air filter follow these simple steps Unplug the power lead 2 Using the tool from the MantaRay Service Kit not supplied with unit insert flat end of tool into top vent release slot 1 and lever away from the lens until top vent 2 is released and remove the air filter 3 Place the new air filter 3 into position 4 Replace the top vent 2 UJ LAMP REPLACEMENT INSTRUCTIONS Lamp access screw Lamp access door Lamp connector N DO WN RA Lamp CAUTION If the lamp fails wait 10 minutes to allow the lamp to cool down prior to replacing with a new lamp _ Unplug the power lead and all connector leads connected to the MantaRay 2 Place MantaRay upside down on a clean stable surface Loosen tilt adjustment thumbscrew and swivel base for ease of access to lamp access door 3 Unscrew the lamp access door using the Phillips head end of the tool in the MantaRgy Service kit not supplied slide out lamp gently with fingers 4 Holding the lamp connector in one hand use the other hand to remove the lamp from its socket 5 Avoid touching the filament of the new lamp by holding the outer surface of the lamp push the new lamp into the 2 centre holes of the lamp connector 6 Push the
6. and hold MODE button and simultaneously press the UP button The On Screen Display will show the word SCAN You have 2 options a Press the UP button to SCAN for television channels OR b Press the MODE button again to exit from this option No television channels will be programmed 2 When SCAN begins the On Screen Display will display SCANNING I 2 3 When MantaRay detects a television signal the corresponding audio will be heard You have 3 options a Press UP button to accept the channel OR b Press DOWN button to reject the channel and continue the SCAN OR c Press MODE button to terminate the SCAN procedure 4 Once desired channels have been programmed into the memory scroll up or down using the UP and DOWN buttons to select a television channel for viewing Page 13 5 AV will appear on the On Screen Display after scrolling to the highest or lowest programmed television channel AV Audio Visual AV is the appropriate channel when using your MantaRay with other devices eg DVD VCR games consoles etc Focus To adjust focus turn the front lens clockwise or anti clockwise until a sharp picture is viewed Height To adjust image height a Support the rear of MantaRay b Turn the tilt adjustment thumbscrew located between the top and base 4 turn anti clockwise c Hold the unit at the required image height d Tighten thumbscrew to lock it into position NOTE Do not over tighten the tilt adju
7. ase to angle the unit s image up higher on the screen wall PACKAGE CONTENTS Ww MantaRay unit in a sealed plastic bag Mains power lead Connector lead RCA lead having yellow and white plug at each end Adaptors Telescopic antenna User Guide Warranty Form including Warranty Registration Form oOo ON BD TO KR WW NY Objective lens Focus ring Top vent Filter cover Bottom air vent Tilt adjustment thumbscrew Speaker Lamp access screw Lamp access door 10 12 13 14 I5 l6 I7 18 Control buttons Rear vent Mains power socket On off switch Antenna socket Video input Audio input Headphones audio out Top vent release slot SET UP amp USE INSTRUCTIONS RECOMMENDED VIEWING amp SET UP GUIDELINES e Mantakagy performs at its best when the image is projected onto a clean white wall or a non reflective screen e The maximum recommended projected image size from MantaRay is 1 5 metres measured diagonally e The size of the projected image is dependent upon the distance MantaRay is placed away from the projection surface ie wall or screen e We recommend that for every metre of image projected measured diagonally the viewer should be 3 metres back from the image These measurements are to be used as a guide only and will not be practicable in all conditions and environments e To adjust the image position on the projection surface support the rear of MantakRay and
8. ital cameras Video cameras VCD players and any other video source with composite video or RF out Initial Set Up Place MantaRay on a flat level surface facing a wall or a screen 2 Insert power lead into MantaRay base 3 Plug other end of power lead into mains power outlet and turn switch on at the wall 4 Remove the lens cap 5 Insert the connector leads into the source device by inserting one of the yellow ended plugs into the video out socket of your source 6 Insert the white ended plug into the audio out socket of your source 7 Plug the 2 supplied adaptors onto the 2 free ends of the connector leads 8 Insert the yellow plug with adaptor attached into the video input marked with a square screen on the MantaRay base Insert the white plug with adaptor attached into the audio input marked with a musical note on the MantaRay base To watch cable satellite television attach an RF lead into the antenna socket of MantaRay Operate MantaRay as per the To Use MantaRay as a television instructions above To Use MantaRay 2 3 4 5 Turn on the power switch located on the base of MantaRay indicated by having the hyphen symbol depressed Press the UP button right button on the back of the MantaRay fin until you select the AV channel option Operate the source device as stipulated in its user manual Refer to Additional Adjustments above to adjust VOLUME CONTRAST BRIGHTNESS and COL
9. newly connected lamp gently back inside the MantaRay body 7 Close the lamp access door and tighten the screw using the tool in the MantakRay Service kit not supplied 8 Remember to replace the air filter at this time see instructions on previous page NOTE Touching the filament will dramatically reduce the lifetime of the lamp Do not over tighten the tilt adjustment thumbscrew Page 19 TROUBLESHOOTING CHECKLIST Please Note Carefully read through the checklist below before returning MantaRay to the point of purchase In an attempt to avoid unnecessary returns a service fee may apply in such circumstances Issue No image Page 20 Solution Make sure that the power lead is properly connected to a fully functional AC electric outlet Make sure that the power lead is properly connected to MantaRay If MantaRay is plugged into a power board make sure that the power board is turned on Make sure that you have removed the lens cap on the lens at the front of MantaRay Make sure that MantaRay is switched ON at the switch on the base of the unit Check the lamp to ensure that it is securely connected in the lamp connector See Lamp Replacement Instructions on page 19 of the User Guide Make sure that the cable connectors do not have any bent pins Make sure that the cables are correctly connected to both MantakRay and the source device ie DVD VCR etc Check the lamp to ensure that it has not blown If i
10. oid damaging the AC plug power cord and any connector leads to other electrical devices Power supply cords and connector leads should be positioned so that they are not likely to be walked on or pinched by items placed on or against them Take specific care with the power cord and connector leads at attachment points 8 Object amp Liquid Entry Never push objects or allow liquids of any kind to enter vents as they may touch dangerous voltage points or cause a short circuit that may result in fire or electric shock Keep all liquids clear of MantaRay 9 Water amp Moisture Do not use MantaRay near water or other liquids Do not operate this unit in a moist environment 10 Heat It is recommended that MantaRay not be operated at temperatures over 35 C or humidity over 85 The unit should be situated away from any source of heat Always position the unit in a well ventilated environment I l Ventilation Keep MantaRay vents clear and uncovered to prevent overheating For minimal servicing and to maintain high image quality we recommend that this unit be used in an area free from high humidity dust and cigarette smoke When the unit is subjected to these environments the filter will require more regular replacement 12 Lamp Replacement If the lamp blows it will remain hot for a short period before it cools down We recommend that the user waits at least 10 minutes prior to touching the lamp for replacement 13 Lens Cap Always
11. stment thumbscrew When there is no On Screen Display press the MODE button to initiate the following cycle VOLUME CONTRAST BRIGHTNESS and COLOUR VOLUME ADJUSTMENT a Press the MODE button in the centre once The word VOLUME a green bar and a VOLUME SETTING range of 0 30 will appear on the bottom of the On Screen Display b Press and release left button to lower VOLUME The On Screen Display will display the volume setting Press and release right button to increase VOLUME The number increases or decreases as the VOLUME is adjusted The green bar becomes shorter or longer depending on VOLUME selected CONTRAST ADJUSTMENT a Press the MODE button in the centre once The word CONTRAST a green bar and a CONTRAST SETTING range of 0 30 will appear on the bottom of the On Screen Display b Press and release left button to decrease CONTRAST The On Screen Display will display the CONTRAST setting Press and release right button to increase CONTRAST The number increases or decreases as the CONTRAST is adjusted The green bar becomes shorter or longer depending on CONTRAST selected Page 14 BRIGHTNESS ADJUSTMENT a Press the MODE button in the centre once The word BRIGHTNESS a green bar and a BRIGHTNESS SETTING range of 0 30 will appear on the bottom of the On Screen Display b Press and release left button to decrease BRIGHTNESS The On Screen Display will display the BRIGHTNESS setting Press and release right button
12. t has see Lamp Replacement Instructions on page 19 of the User Guide If you are watching TV check that the antenna is inserted into the antenna socket and extended Issue Solution No sound Adjust volume e Press the middle control button on the back of the MantaRay fin once to bring up Volume control on the on screen display Press left control button on back of fin to lower the volume e Press the right control button on back of fin to increase the volume Verify audio input connections Adjust audio source Colour or text not being You might need to adjust the brightness up or down projected until the text is visible e Press left control button to darken the image e Press right control button to lighten the image Image isn t centred onthe Reposition MantaRay wall screen Adjust the tilt of the MantaRay by turning the tilt adjustment thumbscrew 1 4 turn anti clockwise and tilting up or down Tighten the thumbscrew again Image is out of focus Suggested solutions e Adjust the focus by turning the projection lens to focus the image e Check the projection lens to see if it needs cleaning If required do so with a lens cleaning tissue cloth Page 21 Issue Projector displays 29 bleeding or spots Poor colours Lamp blows Lines in the picture source using the TV tuner feature Lamp shuts off Solution Adjust the brightness e Press left control button on back of fin to darken
13. the following address Digislide PO Box 20 NORTH ADELAIDE SA 5006 ACCESSORIES AVAILABLE Service Kit includes Spare lamp MantaRay tool for replacing air filter and lamp Replacement filter
14. the image e Press the right button on back of wing to lighten the image e Check the projection lens to see if it needs cleaning Adjust the colour and brightness from the onscreen menu display See Display Menus in your User Guide Replace the lamp as described in Lamp Replacement Instructions on page 19 of the User Guide Reposition the antenna A minor power surge may cause the lamp to shut off Turn MantaRay off wait at least one minute then turn it back on Visit www mantaray net au for a full list of FAQs and regularly updated troubleshooting information Page 22 TECHNICAL SPECIFICATIONS MantaRay Projection system Anamorphic LCD technology LCD panel 181470 pixels 4 3 aspect ratio Projection lens Fixed focal manual focus All lenses Multi coated glass lenses Lamp OOW TH lamp Brightness 575 ANSI lumens Number of colours 16 7 million Image size 5m diagonal optimum Projection distance 3m optimum Colour System PAL Video Input 3 5mm connector Audio input Mono mini jack Audio output Mono mini jack Built in TV tuner PAL Antenna input RF coaxial 75 ohm Operation On screen menu display Unit colour Blue amp black dark grey Internal speaker 2 5W mono Power input 240V AC 50Hz Dimensions A4 footprint Weight 3kg Fan noise 28 dB Operating temperature 5 35degC Page 23 WARRANTY REGISTRATION Fill out the warranty registration card enclosed within the packaging of MantaRay and send to
15. to increase BRIGHTNESS The number increases or decreases as the BRIGHTNESS is adjusted The green bar becomes shorter or longer depending on BRIGHTNESS selected COLOUR ADJUSTMENT a Press the MODE button in the centre once The word COLOUR a green bar and a COLOUR SETTING range of 0 30 will appear on the bottom of the On Screen Display b Press and release left button to decrease COLOUR The On Screen Display will display the volume setting Press and release right button to increase COLOUR The number increases or decreases as the COLOUR is adjusted The green bar becomes shorter or longer depending on COLOUR selected NOTE Each adjustment option will time out after approximately 3 seconds This means for example to adjust CONTRAST you will need to press the MODE button whilst the VOLUME option is still visible on the On Screen Display to gain access to the CONTRAST adjustment MantaRay will store the programmed television channels in its memory If TV is the last source that you were using prior to turning off MantaRay it will remember the particular channel you were viewing MantaRay will project that channel the next time it is turned on A channel will appear in the bottom centre of the On Screen Display eg 2 The icon will disappear after 3 seconds if no control buttons have been pressed Page I5 External video sources may include DVD players Games consoles VCRs Cable amp satellite TV Dig
Download Pdf Manuals
Related Search