Home

DCS-900W Configuration (continued) - D-Link

1. D Link Corporation End User License Agreement NOTICE TO USER THIS IS A CONTRACT BY INSTALLING DOWNLOADING OR USING THIS SOFTWARE YOU ACCEPT THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT 1 Intellectual Property Rights This IFView Lite the software is copyrighted and is proprietary product of D Link Corporation The software is also protected by United States Copyright Law and Do you accept all the terms of the preceding License Agreement If you choose No the setup will close To install IPView Lite you must accept this agreement InstallShield Click Yes InstallShield Wizard Choose Destination Location Select folder where Setup will install files Setup will install P iew Lite in the following folder To install to this folder click Next To install to a different folder click Browse and select another folder Destination Folder E Program Files Few Lite InstallShield Click Next Cancel 42 IPView Lite Application Installation continued InstallShield Wizard Select Program Folder Please select program folder Setup will add program icons to the Program Folder listed below You may type a new folder name or select one from the existing folders list Click Next to continue Program Folders IPView Lite Existing Folders Accessories Administrative Tools Dameware NT Utilities Cli
2. 96 Warranty continued The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D Link to confirm the same The original product owner must obtain a Return Material Authorization RMA number from the Authorized D Link Service Office and if requested provide written proof of purchase of the product such as a copy of the dated purchase invoice for the product before the warranty service is provided After an RMA number is issued the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit and the RMA number must be prominently marked on the outside of the package Do not include any manuals or accessories in the shipping package D Link will only replace the defective portion of the Product and will not ship back any accessories The customer is responsible for all in bound shipping charges to D Link No Cash on Delivery COD is allowed Products sent COD will either be rejected by D Link or become the property of D Link Products shall be fully insured by the customer and shipped to D Link Systems Inc 17595 Mt Herrmann Fountain Valley CA 92708 D Link will not be held responsible for any packages that are lost in transit to D Link The repaired or replaced packages will be shipped to the customer via UPS Ground or
3. Add Delete Cancel Apply To add a user click on the Add icon and the Add User dialog box will appear Enter the User Name and Password into the specific field To delete a user select the user and click Delete 61 IPView Lite continued Camera Property Settings gt Date Time Date Time Set the camera s time and date to provide correct time information for remote users by selecting Synchronized with Time Server or Set Manually Please refer to the DCS 900W Configuration section under Tools Time on P 36 for further details D Camera Property Tools Recording Date Time Information General IP Assignment DNS wireless Misc Image User i Sunchronized with Time Server de Set Manually Date 2004 fo m pypp mm dd Time os foa oo hh mm 28 62 IPView Lite continued Camera Property Settings gt Information Information Displays information about the camera such as the model firmware version MAC address and IP address Please refer to the DCS 900W Configuration section under Status on P 38 for further details D Camera Property General IP Assignment DNS Wireless Misc Image User DateTime Firmware Verso MAC Address IP Address BOOT ROM Version Hi Version Tools Recording DCS SO0 2 20 OD FF 4F 57 40 CC 192 168 0 20 1 20 Al 63 IPView Lite continued Camera Property Settings gt Tools Tools Reset the
4. Previous Page Fil Next Page Fie Once you click Rotate Right or Rotate Left in the menu the video will rotate 90 degrees to the right or left How to take a Snap Shot with the Camera To take a snap shot with the camera you must highlight the camera you wish to use from the IPView Lite list view format From the menu bar select Camera gt Snap shot A Save Image dialog box will appear for you to save the snap shot picture Alternatively select from the viewing mode either 1 or 4 cameras Click on the icon located on the upper left corner of the screen Acase sensitive menu will appear Select the Snap shot icon A Save Image dialog box will appear for you to save the snap shot picture 54 IPView Lite continued How to Start Recording To start recording with a camera you must highlight the camera you want to use from the list view format From the menu bar select Camera gt Start An AVI file will appear in your IP View Lite folder to save the recorded videos Alternatively in the viewing mode using either 1 or 4 cameras right click on the icon located on the upper left corner of the screen A case sensitive menu will appear Select the Start icon An AVI file will appear in your IPView Lite folder to save the recorded videos Note You must stop recording before changing any camera settings How to Stop Recording To stop recording with a camera you must highlight the camera you wish to stop from the list view f
5. f Adhoc SSID default Wireless Channel WEF kep Format Enernmptor WEP Kep Confirm WEP Key 59 IPView Lite continued Camera Property Settings gt Misc Image Misc Configure the LED Control ActiveX control location and second port in this menu Please refer to the DCS 900W Configuration section under Advanced System on P 19 for further details D Camera Property Information Tools General IP Assignment DNS wireless LED Control fe Normal C OFF C Dummy Active Control Location I Second Port Cancel apr Image Brightness contrast hue resolution compression frame rate and light frequency can be adjusted for your camera Please refer to the DCS 900W Configuration section under Advanced Video on P 33 for further details D Camera Property Information Tools Recording Preview VIES Resolution 320 240 3 mE A l 4 ioe ea Frame Rate Auto i Compression Medium vi Light Freq 60 Hz vi Date Display No Display vi Brightness Contrast Saturation 60 IPView Lite continued Camera Property Settings gt Users Users Set up user accounts with user name and password for camera access Please refer to the DCS 900W Configuration Setting under Tools Admin on P 34 for more detailed information D Camera Property Information Tools General IP Assignment DNS Wireless Misc Image l
6. 1 3 color CMOS sensor Automatic Automatic Automatic Electronics 1 60 1 15000 sec 2 5 ux f1 4 3000K color 6 0 mm F 1 8 JPEG 20fpsESIF 10fps VGA 5 level Very Low Low Medium High Very High 1 5 7 15 20 auto depends on the video format 320x240 640x480 Range 1 128 Range 1 128 Range 1 128 One RJ 45 port to connect to 10 100Mbps Ethernet auto sensed One 802 11b Wireless Antenna 93 Technical Specifications continued LED Indicator Power LED Green LAN Activity LED Orange Normal Off Dummy Power Supply DC 5V 2 5A switching type Power Communication 4 5 Watt 900mA x 5V Communication Support Communication 10 100Mbps Ethernet and Fast Ethernet or 802 11b Wireless Communication protocol HTTP TCP IP UDP ARP ICMP BOOTP RARP DHCP PPPoE Web Configuration Requirements e Internet Explorer 5 0 or above or Netscape 6 0 or above e CPU Pentium II 266 MHz or above e Memory Size 32 MB 64 MB recommended e VGAcardresolution 800x600 or above PC Requirements for IPView Lite e Windows XP Windows 2000 Windows Me Windows 98SE e Pentium lil 450 MHz CPU or above e 128 MB 256 MB Recommended EMI amp Safety FCC CE VCCI Maximum wireless signal rate based on IEEE Standard 802 11b specifications Actual data throughput will vary Network conditions and environmental factors including volume of network traffic building materials and construction and network ov
7. D PViewLite New Configuration File view Camera Tools About 4 v Toolbar amp 2 ob Status B Mame Prem MAC Address Location Local Time Status D Columns 0003 16 06 08 OG 2002 1 1 1 10 53 Enable List Ctrl F1 d 1 Camera Ctrl F3 H 4 Cameras Ctrl F4 Refresh Fiz Columns When Columns is launched a dialog box will appear displaying the Column Settings Select the columns that you wish to appear in the List View as illustrated below D Column Settings IV MAC Address MV Location I Local Time IV Status OK Cancel Viewing Format You can view the format in List view The List viewing format allows easy management and control of each camera 70 IPView Lite continued List View All the cameras and their properties such as the camera name IP Address user name and location will be displayed in the list view D PvViewlite New Configuration File View Camera Tools About LOM AU ee ao IF Address MAC Address Location Local Time Status ink DCS 900 192 168 0 20 000316080800 12002 1 1 1 10 53 E 97172003 1 02 PM Note Right click on any camera to bring up a menu of actions you can apply to the selected camera Double clicking on the desired camera will bring up the Property dialog box You can click the Refresh icon to update the camera list view 71 IPView Lite Getting Started continued Menu Bar gt Camera Tools Camera on the menu bar provides options to ma
8. For example for a multiple camera installation you can open the second port for each additional DCS 900W from Port 81 to Port 85 as follows Internet Camera 1 IP 192 168 0 101 second Web Port 81 Internet Camera 2 IP 192 168 0 102 second Web Port 82 Internet Camera 3 IP 192 168 0 103 second Web Port 83 Internet Camera 4 IP 192 168 0 104 second Web Port 84 Internet Camera 5 IP 192 168 0 105 second Web Port 85 25 DCS 900W Configuration continued Advanced gt System Note If you are installing multiple DCS 900W and wish to use the default 192 168 0 20 address remember to assign this address to the LAST camera that you plan to install to avoid conflict of IP Address IMPORTANT You MUST also set up your router gateway for Port Mapping this will enable remote viewing of multiple cameras via the Internet Please refer to your router s instruction manual on how to open up ports For additional help on configuring your camera to work with your router please refer to the next section on setting up your camera for use with a router Apply Cancel After making sure all your settings are correct click on the Apply button to store the settings You can alternatively click on the Cancel icon to restore all settings to the values last saved to or retrieved from the DCS 900W 26 DCS 900W Configuration continued Installing the DCS 900W Behind a Router Single Camera Installation If you are installing a single
9. Important Information It is highly recommended to install the Xplug Control application to the Web Server for Internet Explorer 5 0 It must be installed to a Public Domain with a Fixed IP Address mm Installation Copy the xplug ocx file to any Web Server table Note the web address of the file location so that you can use it in the next step 2 Configuration From the Web Configuration menu select System and under the Loading ActiveX From input web server location type http www web server location com Once the settings are completed you should now be able to access the Internet Camera from the web browser by selecting ActiveX mode 88 Installation of the X Plug to a Local PC continued Insert the CD ROM into the CD ROM drive to initiate the auto run program Once completed a menu screen will appear as follows PS D Link Building Networks for People Network 2 4GHz Wireless This Installer will guide you through the installation i nternet C amera process You are only moments away from using your new D Link Networking Product Click Install Software View Quick Installation Guide View Manual P gt Yahoo Premium Services s service Is available for US Customers Only gt TUAIS Pro Security Software gt This service is available for US Customers On Visit support dlink com o install Xplug Control click on the Xplug Control but
10. The IP Address of your camera must correspond with your network settings for you to access the camera If you are fs2168020 92168020 i IP Address REE unsure of what these settings should be please check with your network NOG 255 2552550 administrator Gateway i 92168 01 Click OK 16 DCS 900W Configuration Web Configuration After completing the Setup Wizard you are ready to use your camera The Web configuration utility is designed to easily access and configure your DCS 900W If you would like to open the configuration page from a Web Browser enter the IP address that you assigned to your DCS 900W E D Link Systems Inc Microsoft Internet Explorer File Edit View Favorites Tools Help ELG k x B KA po Search JG Favorites GA media E Address http 192 168 0 20 D Link aS Building Networks For People Home Screen After the camera s IP address is entered in the Browser the DCS 900W Home screen will appear with a still image from your camera There will be three options to choose from to set up and view your Internet Camera ActiveX Java Setup 17 DCS 900W Configuration continued 3 DCS 900W DCS 900W Microsoft Internet Explorer PENE File Edit View Favorites Tools Help Back v Q x a A P Search FE Favorites GP media E R z te Address http 192 168 0 20 EE co Links DCS 900W Wireless Internet Camera 2003 01 01
11. continued Advanced gt System Camera Name This field is used for entering a descriptive name for the camera The default setting for the Camera Name is DCS 900W The maximum length is 32 characters Printable ASCII Location This field is used for entering a descriptive name for the location used by the DCS 900W IP Assignment Important Information Access to the Internet Camera is gained by assigning a proper IP Ad dress Please make sure to use a vacant IP address when you assign the IP Address for the Internet Camera This will prevent IP Address conflicts There are two options to select from the IP Assignment either Manually Assign or Assign Automatically Using Manually Assign You can click Manually Assign and directly enter a valid IP Address for your camera Remember that your camera s IP Address must correspond to your network settings if you wish to change it here The default settings are as follows Default IP 192 168 0 20 Subnet Mask 255 255 255 0 Default Gateway 0 0 0 0 20 DCS 900W Configuration continued Advanced gt System Assign Automatically Using Important This options is recommended only for advanced users and network administrators since it may be difficult to determine the IP Address of the unit after the IP Address has been automatically asssigned It is recommended that an IP Address be assigned manually If your network is using RARP BOOTP o
12. 192 168 0 20 The Information table provides detailed information about the DCS 900W such as the Model Name Firmware Version Mac Address and IP Address 38 DCS 900W Configuration continued Status Completing Your Camera Configuration Once the configuration is completed click on Home to return to the Home screen and select the desired Viewing Image using either ActiveX Mode or Java Mode as described in the next section The last step is to position the DCS 900W and adjust the focus by manually turning the lens clockwise or counter clockwise to the desired image quality ActiveX To view video images from the browser click on ActiveX in the Home screen and the following screen appears below CS 574DCC DCS 900W Microsoft Internet Explorer Camera Name The Camera name will be displayed in the top bar located above the camera image when the Camera Name field is entered in the Web Configuration setting under Advanced gt System File Edit View Favorites Tools Help Q sak amp x a A p Search JF Favorites A media E es Lu Address http 192 168 0 20 DCS 900W Wireless Internet Camera 2003 01 01 00 25 0 a Location The loca tion of the DCS 900W will be dis played when the Lo cation field is changed in the Web Configuration set Date Time The date time of the DCS 900W will be tings under Ad displayed according to your time server setti
13. 192 168 060 268 Packets Sent 4 Received Lost 4 168 loss E NDocuments and Settings PMalan gt _ 2 Check to see if you have entered your camera s IP Address correctly and reassign your camera s IP Address to a valid IP address of the network 85 Time Zone Table GMT stands for Greenwich Mean Time which is the global time that all time zones are measured from SMT 12 00 International Date Line West OMT 11 00 Midway Island Samoa SMT 10 00 Hawaii SMT 09 00 Alaska FaMT 08 009 Pacific Time US amp Canada Tijuana GMT 07 00 Arizona SMT 07 00 Chihuahua La Paz Mazatlan HaMT 07 009 Mountain Time US amp Canada SMT 06 00 Central America SMT 06 00 Central Time US amp Canada SMT 06 00 Guadalajara Mexico City Monterrey SMT 06 00 Saskatchewan SMT 05 00 Bogota Lima Quito SMT 05 00 Eastern Time US amp Canada SMT 05 00 Indiana East SMT 04 00 Atlantic Time Canada GMT 04 00 Caracas La Paz SMT 04 00 Santiago SMT 03 30 Newfoundland SMT 03 00 Brasilia GMT 03 00 Buenos Aires Georgetown SMT 03 00 Greenland SMT 02 00 Mid Atlantic SMT 01 00 Azores SMT 01 00 Cape Verde Is SMT Casablanca Monrovia SMT Greenwich Mean Time Dublin Edinburgh Lisbon London SMT 01 00 Amsterdam Berlin Bern Rome Stockholm vienna SMT 01 00 Belgrade Bratislava Budapest Ljubljana Prague MaMT 01 009 Brussels Copenhagen Madrid Paris SMT 01 00 S
14. 255 2550 DNS 1 f192 152 81 1 DNS 2 4222 The Setup Wizard has completed Click on Back to modify your settings Click Restart to save your current settings and reboot the DCS 900 Series Camera Setup Wizard Care 1P as 00 03 1B 10 23 B4 192 168 0 20 Q sxx z x a KA po Search she Favorites P media 2 Address http 192 168 0 20 DCS 900W Wireless Internet Camera Internet 15 Using the Setup Wizard continued If you change any of the default settings in the Setup Wizard the following screens may appear This screen appears if the default IP D DCS 900 Series Camera Address of the camera 192 168 0 20 does not correspond with your local Your camera s IP Address may be invalid area network settings You must assign Please change your camera s IP Address to an IP address for your camera that match your network settings or you will be corresponds to your network s IP unable to connect to the camera addressing scheme Click Yes By default the Admin ID and Password are blank If you are running this Setup Wizard for the first time leave both Admin ID and Password fields blank and simply click OK to continue If you want to enter the Admin ID and Password enter them and click OK to continue Click OK Would you like to change the IP Address now D DCS 900 Series Camera Enter 4dmin ID Enter Password Cancel
15. 900W Behind a Router ROUTER SET UP AND INSTALLATION The following steps generally apply to any router that you have on your network The D Link DI 614 is used as an example to clarify the configuration process l8 x 3 DI 614 Microsoft Internet Explorer ig File Edit View Favorites Tools Help q Back v b at A Search Ga Favorites 4 E5 8 A Address C Documents and Settings ddo Desktop all DI 614 htmlist_devic html Enhanced 2 4GHz Wireless Router k v 2Go Links z Home Advanced Tools Help Device Information Firmware Version eee MAC Address IP Address Log Subnet Mask DHCP Server Your WAN IP ar Address MAC Address i i Connection In ormation will be listed here IP Address Subnet Mask amy co Determine Your Router s WAN IP Address Note Because a dynamic WAN IP address can change from time to time depending on your ISP you may want to obtain a Static IP address from your ISP A Static IP address is a fixed IP address that will not change over time and will be more convenient for you to use to access your camera from a remote location You can use DDNS to obtain an IP address please refer to P 22 for more information E Done 30 DCS 900W Configuration continued Installing the DCS 900W Behind a Router ASSIGNING AND OPENING VIRTUAL SERVER PORTS 5 Open Virtual Server Ports To Enable Remote Image Viewing Th
16. Camera view format The hot key is Ctrl F4 4 Refresh IPView Lite application The hot key is F12 i Add a camera The hot key is Shift Ins amp Delete a camera The hot key is Del FE Property setting to configure the camera The hot key is F2 0 Snap shot to capture a single still image The hot key is F5 Options to modify the User Name and Password for IP View Lite The hot key is F10 gt Start recording video image Alternatively the hot key is F7 Stop recording video image Alternatively the hot key is F9 76 IPView Lite continued Context Sensitive Menu In List View format highlight a camera and right click to bring up a context sensitive menu for features such as Add Delete Property Enable Snap shot Start and Stop recordings D IPViewLite New Configuration E BK File Wie Camera Tools About z3 IF Address MAC Address Location Local Time Status 2002 1 1 0 8 18 o add Shift Ins Delete Dei Property Fe vw Enable F3 Snap shot F5 Start F7 m Stop Fa In View mode format click on the icon located on the upper left corner of the screen and a case sensitive menu will appear see below Ca Rotate Right x9 Rotate Left Ctrl F3 Ctrl F4 Previous Page Fil Next Page Fiz These features will be available Enable Rotate ROIR Rotate Left Snap Shot Start Stop List 1 Camera or 4 Cameras Previous Page and Next Page T7 Uninstall IPView Lit
17. Default 8481 P E Internet To enable WEP Encryption first decide which WEP key format will be applied Click on the ASCII or HEX check box to select the type of format then input the WEP key To Confirm the WEP key you must enter the data once again in the Confirm WEP Key field ASCII input format ASCII format interprets each character as an eight bit value All unaccented upper and lower case Western European characters that can be input through your keyboard s typing zone are valid To set up a 64 bit WEP key input 5 ASCII characters for example dlink To setup 128 bit WEP key input 13 ASCII characters for example dlinkcamera10 This results in bit counts of 40 and 104 respectively the Internet Camera will automatically pad your input to a bit count of 64 or 128 23 DCS 900W Configuration continued Advanced gt System HEX input format HEX format interprets each pair of characters as an eight bit value in hexadecimal base 16 notation Only the digits 0 through 9 and the letters A through F in upper or lower case are valid To set up a 64 bit WEP key input 10 numbers in HEX format for example 3132333435 this is the same with the ASCII input 12345 To set up a 128 bit WEP key input 26 numbers in HEX format for example 31323334353637383930313233 this is the same with the ASCII input 1234567890123 This results in bit counts of 40 and 104 respectively the Internet Camera will au
18. Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware the price paid by the original purchaser for the defective Hardware will be refunded by D Link upon return to D Link of the defective Hardware All Hardware or part thereof that is replaced by D Link or for which the purchase price is refunded shall become the property of D Link upon replacement or refund Limited Software Warranty D Link warrants that the software portion of the product Software will substantially conform to D Link s then current functional specifications for the Software as set forth in the applicable documentation from the date of original retail purchase of the Software for a period of ninety 90 days Warranty Period provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation D Link further warrants that during the Warranty Period the magnetic media on which D Link delivers the Software will be free of physical defects D Link s sole obligation shall be to replace the non conforming Software or defective media with software that substantially conforms to D Link s functional specifications for the Software or to refund at D Link s sole discretion Except as otherwise agreed by D Link in writing the replacement Software is provided only to the original licensee and is subject to the terms and conditions of the license granted by D Lin
19. and will generate much smaller files to save your hard disk drive space D Camera Property General IP Assignment DNS Wireless Misc Image User Date Time l ee oie ofa rn En re Se cree aoa Information Tools i Recording r Recording Options fe Manual Recording ie Round the clack C Dynamic Recording f Schedule Recording f Round tl C Motion Trigger Recording File Options File Size File Path Path Working E A Program Files Pyle Lite E A Program Files Fy iew Lite E Program FilesIPYiew Lite E A Program Files Fy iew Lite est 65 IPView Lite continued Camera Property Settings gt Recording Scheduled Recording Select Schedule Recording to record based on specific times and dates Click Schedule Setting to set the time and date for recording your files Select By Date and enter in the dates Start and Stop Times The camera will start to record according to the specified date and time period entered Select By Week to indicate specific days to record and the time period Larger files will be generated if Round the Clock Manual Recording is chosen The Dynamic Recording option records more video frames based on movement and less franmes if there is no movement in the video captured and this will generate much smaller files to save your hard disk drive space D Camera Property General IP Assignment DNS Misc Image User Date Time Information Tools Recording Recording Options C Manu
20. any common carrier selected by D Link with shipping charges prepaid Expedited shipping is available if shipping charges are prepaid by the customer and upon request D Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements or for which an RMA number is not visible from the outside of the package The product owner agrees to pay D Link s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements or that is determined by D Link not to be defective or non conforming What Is Not Covered This limited warranty provided by D Link does not cover Products if in D Link s judgment have been subjected to abuse accident alteration modification tampering negligence misuse faulty installation lack of reasonable care repair or service in any way that is not contemplated in the documentation for the product or if the model or serial number has been altered tampered with defaced or removed Initial installation installation and removal of the product for repair and shipping costs Operational adjustments covered in the operating manual for the product and normal maintenance Damage that occurs in shipment due to act of God failures due to power surge and cosmetic damage Any hardware software firmware or other products or services provided by anyone other than D Link Products that have been
21. circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help 98 Registration Register your product online at age fe feupport dlink com register Product registration i is entirely voluntary and failure to complete or return Ahs form will not diminish your warranty rights 99
22. configure your camera and to view your camera within your local home network You may use the default camera IP Address of 192 168 0 20 If you wish to use a different IP Address be sure that the camera settings correspond to your network settings The Default Gateway will be the IP Address of your router s Local IP Address i e 192 168 0 1 if you are using a D Link router Enter a valid z IP address D Link DCS 900W for your SURO INNES TORE CON Wireless Internet Camera camera eum Advanced EE E Status i Location _ system IP Assignment Manually Assign IP Address 192 168 0 20 vieo Subnet Mask 255 255 255 0 l Video Default Gateway 192 168 0 1 Assign a Local IP Address 28 System Setting Camera Name DCS 900W DCS 900W Configuration continued Installing the DCS 900W Behind a Router Assigning and opening second port in the DCS 900W For Installing Multiple Cameras Opening ports will allow users to view the camera via the Internet The ports that are opened must be unique for each camera in order to successfully view the images remotely 3 Open Second Port The Open Second Port option is used when multiple cameras are being installed on a network OR for using a port other than the default port for image viewing For each additional camera that is installed you must select the Open Second Port Option and assign the appropriate Web server
23. full capacity the images will then be stored in the next designated file path To change file paths highlight the file path and double click to select a new drive directory to store your video images The screen below will appear Click Browse to select a drive directory and place a check mark in the Path box to enable the drive directory for use Click OK to save your changes D Recording File Path Setting E Program Files PY lew Lite Browse lv Working Path OK Cancel IPView Lite continued Menu Bar The menu bar makes it easier to navigate IP View Lite All Management functions can be accessed from the menu bar Menu Bar gt File New gt Opens a new camera list Cameras must then be added to the list for configuration Open gt Opens saved camera lists Save Save As gt Saves your current list of cameras and configurations Exit gt Exits the IPView Lite Application D PViewLite New Configuration File view Camera Tools About L New crn PP AOA Mm a Open Ctr o MAC Address Location Local Time Status save Eia 000316080800 2002 1 1 1 10 53 Have 5 Exit Fi E S71 772003 12 59 PM 69 IPView Lite continued Menu Bar gt View View on the menu bar provides users with management capabilities for Columns List Camera and Refresh You can view the Camera in 1 Camera or 4 Camera mode The View menu bar is pictured below
24. gt Please type your username and password Site 192 188 0 254 Realm Admin User Name Password Save this password in your password list Cancel 35 DCS 900W Configuration continued Tools gt Time The Time menu sets the DCS 900W s time and date requirements to provide correct information to users who are accessing from a remote site The two options in the Time settings are Synchronized with Time Server or Set Manually Click on Time in the left hand panel and this screen will appear as illustrated below DCS 900W DCS 900W Microsoft Internet Explorer File Edit View Favorites Tools Help ay Q ssx Q gt a EA x Search Sie Favorites GP media amp GA E Address http 192 168 0 20 DCS 900wW Wireless Internet Camera Home Advanced Tools Status Help ME A Date amp Time O Synchronized with Time Server Ka IP Address Protocol ONTP OTime aamin TimeZone 0 v Hours Set Manually Date 2003 1 1 yyyy mm_ dd Time 0 3 22 hh mm ss ha S a Dens Internet z DateTime Select Synchronized with Time Server and the time will be based on the GMT setting This is the default setting for the DCS 900W Using a time server with your camera is recommended for time date accuracy for your recorded video images and is critical for surveillance applications Public time servers are available on the web You must choose the app
25. if the IP Address of the Internet Camera is a valid IP address over the network Follow the step by step procedure below to utilize the PING command Start a DOS window Start gt Program gt Accessories gt Command Prompt Type ping x x x x where x x x x is the IP Address of the Internet Camera c Command Prompt op Microsoft Windows XP Version 5 1 2600 lt C gt Copyright 1985 2661 Microsoft Corp E NDocuments and Settings PMalan gt ping 192 168 6 26 Pinging 192 168 6 26 with 32 bytes of data Reply from 192 168 6 2 hytes 32 time lt ims TTL 255 192 168 8 2 hytes 32 time lt ims TTL 255 192 168 8 2 8 bytes 32 time lt ims TTL 255 Reply from 192 168 2 bytes 32 time lt ims TTL 255 Ping statistics for 192 168 6 28 Packets Sent 4 Received 4 Lost z loss Approximate round trip times in milli seconds Minimum ms Maximum ms Average ns E NDocuments and Settings PMalan gt 84 How to Ping your IP Address continued 1 A successful connection to the camera will be indicated by 4 reply statements above If you fail to connect to your camera you will see the following c Command Prompt Microsoft Windows AP Version 5 1 2666 lt C gt Copyright 1985 2661 Microsoft Corp E NDocuments and Settings PMalan gt ping 192 168 686 206 Pinging 192 168 686 260 with 32 bytes of data Request timed out Request timed out Request timed out Request timed out Ping statistics for
26. if your have already set the Username and Password during the Web Configuration setting How to Delete a Camera To delete a camera you must highlight the camera you wish to delete from IP View Lite list view format From the menu bar select Camera gt Delete A Delete Camera dialog box will appear Click Yes to delete the camera or click No if you do not wish to delete the camera D IPViewlite New Configuration File View Camera Tools About DAGHIHA ee aous a TATE Le ee aT List view gt 9 17 2003 1 02 PM y Delete Camera Click Yes IPView Lite continued How to Format the Camera view From the menu bar select View gt 4 Cameras See below The icon on the upper left corner of the screen will appear with the camera number that is being displayed To return to the IPView Lite list view right click on the icon located on the upper left corner of the screen and a case sensitive menu will appear Select List and the viewing image will return to the list view format A maximum of 4 cameras can be viewed simultaneously with IP View Lite 53 IPView Lite continued How to Rotate the Video view In View Mode format click on the icon located on the upper left corner of the screen and a pop up menu will appear o Enable F3 wo Rotate Right KI Rotate Left Snap shot Start 21 Stop FY 2 List Ctrl F 1 LJ 1 Camera Ctrl F3 HH 4 Cameras Ctrl F 4
27. or used to make any derivative such as translation transformation or adaptation without permission from D Link Corporation D Link Systems Inc as stipulated by the United States Copyright Act of 1976 Contents are subject to change without prior notice Copyright 2005 by D Link Corporation D Link Systems Inc All rights reserved CE Mark Warning This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a
28. with your DCS 900W and attach it to the antenna connector located on the back of the DCS 900W Attach the Swivel Stand Locate the stand mount on the bottom of the DCS 900W and screw on the swivel stand Connect the Ethernet Cable Connect the included Ethernet cable to the network cable connector located on the back panel of the DCS 900W and attach it to the network Attach the External Power Supply Attach the external power supply to the DC power input connector located on the rear panel of the DCS 900W and connect it to your local power supply Note Power source is confirmed when the green LED Power Indicator located to the right of the lens on the DCS 900W is illuminated Network Connectivity is confirmed when the orange LED Indicator on the DCS 900W located below the Power LED is illuminated Security To ensure the highest security and prevent unauthorized usage of the DCS 900W the Administrator has the exclusive privilege to create all users The DCS 900W supports multi level password protection access that can be restricted by the Administrator for defined users who have a User Name and User Password The Administrator can release a public User Name and Password so that when remote users access the DCS 900W they will be allowed to view the images transmitted by the DCS 900W Note When the DCS 900W is used for the first time it is highly recommended that the Administrator set the Admin ID and Admin Password to cons
29. 00 04 54 Done i Internet Configuration Click on Setup from the Home screen to access the settings required for the DCS 900W There will be several options in the Configuration page to choose from to setup your DCS 900W and they are as follows Advanced e System e Video Tools e Admin e Time e Default Status Help 18 DCS 900W Configuration continued Advanced gt System The System menu allows you to configure and set up your DCS 900W for operation If you already set up your camera using the Setup Wizard you may view change your settings here To access the System menu click on the Advanced Tab in the menu bar then the System tab in the left hand bar and the System screen will appear as illustrated below DCS 900W DCS 900W Microsoft Internet Explorer File Edit View Favorites Tools Help Q Back x a A P Search FF Favorites a Media E 2 x Ea Address http 192 168 0 20 D Link Building Networks for Peoole Links gt DCS 900W Wireless Internet Camera _ A Tools Status Help 7 System Setting Camera Name DCS 900W Location F IP Assignment Manually Assign IP Address 192 168 0 20 Subnet Mask 255 255 2550 Default Gateway 192 168 0 1 O Assign Automatically Using RARP BOOTP O DHCP 3 2 Internet 19 DCS 900W Configuration
30. DC Power Connector The DC power input connector is labeled DC 5V with a single jack socket to supply power to the DCS 900W Reset Button Reset will be initiated when the reset button is pressed once and Power LED begins to flash Factory Reset will be initiated when the reset button is pressed continuously for three seconds or when the Power LED begins to light up Release the reset button and the Power LED will begin to flash indicating that the DCS 900W s settings are reverting back to the factory settings The IP address will also return to the default setting of 192 168 0 20 Connections continued Bottom Panel view Stand Mount LEDS LED stands for Light Emitting Diode Front view LANLED Power LED Power LED The Power LED is positioned on the right side of the DCS 900W lens Steady green confirms that the DCS 900W is powered ON Note There are three settings for the Power LED for monitoring purposes Normal Off Dummy Please refer to the DCS 900W Camera Configuration section on P 24 for detailed information and usage LAN LED The LAN LED is positioned on the right side of the DCS 900W s lens It is located below the Power LED Steady orange confirms a good connection to the LAN Depending on the data traffic the LED will begin to flash to indicate that the DCS 900W is receiving transceiving from to the LAN network Hardware Installation Attach the Antenna Locate the antenna included
31. DCS 900W Microsoft Internet Explorer File Edit View Favorites Tools Help ae Q sxx Y x a A JO Search S Favorites P media r pr E Address http 192 168 0 20 v Je ink gt DCS 900W Wireless Internet Camera Home Advanced fools Status y i Do you really want to reset this device YES Help Factory Reset Do you really want to factory reset this device Done Internet Factory Reset A factory reset restarts the DCS 900W and returns all settings to their default values The Factory Reset will prompt you with a Do you really want to factory reset this device message and a YES button If you do not want to carry out a factory reset command exit the panel without clicking YES otherwise click on the YES icon and factory reset will be initiated Warning All settings must be reconfigured after a Factory Reset Status The Status menu displays information about your DCS 900W Click on Status and the Information screen will appear as illustrated below DCS 900W DCS 900W Microsoft Internet Explorer EEK File Edit View Favorites Tools Help r Q sxx amp x a A DO search SE Favorites P media 8 f r G E Address http 192 168 0 20 v Eco Links DCS 900wW Wireless Internet Camera Home Advanced Tools Model DCS 900W Firmware Version 2 20 2003 10 24 4 Mac Address 00 03 1B 10 23 B4 IP Address
32. Installation of the X Plug to a Local PC continued InstallShield Wizard InstallShield Wizard Complete Setup has finished installing plug Control on your computer Click Finish Adjusting the Camera Focus To help you get the best image quality keep in mind that while adjusting the DCS 900W focus you can preview the image quality from your Web browser Camera Lens Adjust by turning clockwise or counter clockwise 91 Adjusting the Camera FOCUS continued Note You can further adjust the Internet Camera s image quality through the Web Configuration under Advanced Video on P 33 Please refer to the Web Configuration section for further details Warning Direct exposure to sunlight may cause permanent damage to the CMOS sensor Therefore do not expose the Internet Camera s lens directly to sunlight The Internet Camera is designed for indoor usage and if your application requires prolonged exposure to sunlight a sun visor is recommended to protect the Internet Camera 92 Technical Specifications Video specification Resolution Sensor Gain control Exposure White Balance Shutter Minimum Illumination Focal Length Aperture Image Video Setting Image compression Frame rate Compression Rate selection Frame rate setting Video resolution Brightness control Contrast control Hue control System Hardware LAN Connector WLAN Connector 640 x 480 pixel
33. M into the CD ROM drive A menu screen will appear as shown below D Link Building Networks for People fa Network 2 4GHz Wireless 4 This Installer will guide you through the installation Int ernet C amera process You are only moments away from using your new D Link Networking Product Click Install Software View Manual Yahoo Premium Services his service is available for US Customers Only gt gt b ZoneAtarm Pro Security Software gt This service is available for US Customers Visit support dlink com Link Building Networks for People Network S 2 4GHz Wireless 4 This Installer will guide you through the installation internet C amera process You are only moments away from using your new D Link Networking Product B Install Wizard Click Install stall Plug j i B instali PView Lite Install IPView Lite LAG Lite p Install Adobe Reader gt Install ZoneAlarm Pro is service Is available for US Customers Only B Visit support dlink com 41 IPView Lite Application Installation continued InstallShield Wizard Welcome to the InstallShield Wizard for IPView Lite The InstallShield Wizard will install IP iew Lite on your computer To continue click Next Click Next Cancel InstallShield Wizard License Agreement Please read the following license agreement carefully Press the PAGE DOWN key to see the rest of the agreement
34. SECURICAM Network DCS 900W Internet Camera Manual Version 1 40 D Link Building Networks for People 10 04 04 Contents Package Contents vr 3 Koll 4 Hardware NAN sxmcsec cegenmssennice sasenseteenesencecenoausedaacsecceee 9 Security sanne euderermberrre 10 Using the Setup Wizard rrrnennnnernnnonranernnnnnnanrrnnnnennenennnn 11 DCS 900W Configuration cccccccceececeeeeeeeeteeeeseneetenes 17 Installing the DCS 900W Behind a Router r ereraneranenener 27 IPView Lite Application Installation orrrnrrnnrrarrnnnrnnrnnn 41 Per vr 46 Uninstall IPView Lite Application rerarrvrnrrvrnrrennnrvnnnrennr 78 Appendix FAQ Troubleshooting How to Ping Your IP Address Time Zone Table Active X Installation 80 Technical Specifications rrrrrarernrrrnaneranrrnnnenarennnnnnanennnn 93 Contacting Technical Support rararnnreranennnrernrennerenanennnnene 95 VUNG E E E E EE E E au 96 Registration EEE 99 Package Contents Package Contents One DCS 900W Internet Camera One Installation CD ROM One 802 11b Antenna One AC power adapter One Camera Stand One Category 5 Ethernet Cable If any of the above items are missing please contact your reseller System Requirements Local Area Network 10Base T Ethernet or 100BaseT X Fast Ethernet Wireless Local Area Network 802 11b Wireless Router or Access Point Recommended PC Mac or Notebook to access the In
35. TH LOSS OF INFORMATION OR DATACONTAINED IN STORED ON OR INTEGRATED WITH ANY PRODUCT RETURNED TO D LINK FOR WARRANTY SERVICE RESULTING FROM THE USE OF THE PRODUCT RELATING TO WARRANTY SERVICE OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY EVEN IF D LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES THE SOLE REMEDY FORA BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON CONFORMING PRODUCT THE MAXIMUM LIABILITY OF D LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES EXPRESS IMPLIED OR STATUTORY Governing Law This Limited Warranty shall be governed by the laws of the State of California Some states do not allow exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the foregoing limitations and exclusions may not apply This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state Trademarks D Link is a registered trademark of D Link Systems Inc Other trademarks or registered trademarks are the property of their respective manufacturers or owners Copyright Statement No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means
36. When Program Starts to load all your configured settings each time you run IPView Lite It is highly recommended that you select this option to save your camera settings in IPView Lite j Load Last Configuration When Program Start Single HDD Reserved Space 500 Recycle Cancel In order to allow old video files to be overwritten and replaced by new recorded files place a check mark in the Recycle Box and click on By HDD Reserved Space or By Time The Single HDD Reserved Space field refers to the amount of space left on your drive before overwrite takes place For instance if you enter 1000 MB and your total hard drive space is 3000 MB as soon as your drive reaches 2000 MB capacity your files will be 73 IPView Lite continued Menu Bar gt Tools overwritten You can specify between 300MB to 10GB hard drive reserve space If you reserve 1000MB and you have 3000MB of hard drive space recording will recycle once the 2000MB limit is reached Click on By Time to overwrite old files with new files once the time frame that you specify has been reached Account System Configuration Networking Configuration Clicking on By HDD Reserved Space allows new files to overwrite old files You can reserve 300MB to 10GB HDD for the operating system Single HDD Reserved Space Click on By Time Time 1 240 Hours to IV Becycle overwrite old files with new files once the _ g iniinis time frame that you specify has been 7 reach
37. al Recording Schedule Setting f Round the clock C Dynamic Recording Motion Trigger Recording File Options File Size File Path Working E Program Files IPView Lite E Program Files IPView Lite E Program Files IPView Lite E Program Files YI FView Lite 37372004 4 13 PM 37372004 4 14 PM OK Cancel 66 IPView Lite Getting Started continued Camera Property Settings gt Recording Motion Trigger Recording The Motion Trigger Recording option can be used to record based on motion The DCS 900W will begin to record any time it detects motion Click on Sensitivity Setting to set the sensitivity levels for the DCS 900W Moving the bar to the right will make the DCS 900W more sensitive to motion moving the bar to the left will make the DCS 900W less sensitive to motion D Camera Property General IP Assignment DNS Misc Image User DateTime Information Tools Recording Recording Options f Manual Recording io fa f Schedule Recording File Options File Size File Path Path Working E A Program Files Pyjew Lite L Path E A Program Files Pytew Lite LI Faha E A Program Files Pyjew Lite L Fath4 E 4Program Files PY iew Lite Cancel Apply D Sensitivity Setting aa x SUOUU CeO Ca dade nen KRENKE KKK KKK Kne nemner ES I I I I I Il I I I I I l I I I I I I I I I I I I I I I I I I r PPPPP PETE Tete Tee Pee eeeeee eer etre er ee
38. and Transfer Image ports for each camera to enable remote viewing By default ports 80 Web server port is open If these ports are available for use you DO NOT have to open a second port and can proceed to the next section If port 80 is not available for example if you are already using port 80 to run a Web server or your ISP blocks access on port 80 you MUST open a second port and designate a new Web server port 800 801 802 etc AND a new image transfer port 8482 8483 etc IMPORTANT Be sure to take note of these settings since these same settings will be used to configure your router Open Second Port OYes ONo 1 Web Server Default 80 Enter the desired port 2 Transfer Image Default 8481 0 settings for your camera here Apply Cancel SS ER NE Open a Second Port for Your Camera IMPORTANT NOTE Some ISPs block traffic on commonly used ports like port 80 to conserve bandwidth Be sure to check with your ISP so that you can open the appropriate ports accordingly If your ISP does not pass traffic on port 80 you will need to change the Web server port the camera uses from 80 to something else like 800 If you are behind a residential gateway you will need to open the corresponding port on your gateway as well Not all gateways are the same please refer to your gateway s user s manual for specific instructions on how to forward ports 29 DCS 900W Configuration continued Installing the DCS
39. arajevo Skopje Warsaw Zagreb SMT 01 00 West Central Africa MaMT 02 009 Athens Istanbul Minsk MaMT 02 009 Bucharest oMT 02 00 Cairo MaMT 02 009 Harare Pretoria MaMT 02 009 Helsinki Kyiv Riga Sofia Tallinn Vilnius SMT 02 00 Jerusalem SMT 03 00 Baghdad SMT 03 00 kuwait Riyadh MaMT 03 009 Moscow St Petersburg Volgograd SMT 03 00 Nairobi 86 Time Zone Table continued MaMT 03 301 Tehran SMT 04 00 Abu Dhabi Muscat MaMT 04 001 Baku Tbilisi Yerevan GMT 04 30 Kabul MaMT 05 001 Ekaterinburg SMT 05 00 Islamabad Karachi Tashkent MaMT 05 301 Chennai Kolkata Mumbai New Delhi MaMT 05 451 Kathmandu SMT 06 00 Almaty Novosibirsk SMT 06 00 Astana Dhaka MaMT 06 001 Sri Jayawardenepura SMT 06 50 Rangoon SMT 07 00 Bangkok Hanoi Jakarta SMT 07 00 Krasnoyarsk MaMT 08 001 Beijing Chongqing Hong Kong Urumqi SMT 08 00 Irkutsk Ulaan Bataar MaMT 08 009 Kuala Lumpur Singapore MGMT 08 001 Perth MaMT 08 001 Taipei SMT 09 00 Osaka Sapporo Tokyo MGaMT 09 001 Seoul MaMT 09 001 Yakutsk MaMT 09 301 Adelaide SMT 09 30 Darwin MaMT 10 009 Brisbane SMT 10 00 Canberra Melbourne Sydney SMT 10 00 Guam Port Moresby SMT 10 00 Hobart SMT 10 00 Vladivostok SMT 11 00 Magadan Solomon Is New Caledonia MaMT 12 001 Auckland Wellington SMT 12 00 Fiji Kamchatka Marshall Is MaMT 13 009 Nuku alofa 87 Xplug Control Installation Installation to a Web Server
40. ariety of Platforms Supporting TCP IP networking HTTP and other Internet related protocols the DCS 900W can be utilized in a mixed operating system environment such as Windows Unix and Macintosh It can also be integrated easily into other Internet Intranet applications because of its standards based features 802 11b Wireless or Ethernet Fast Ethernet Support The DCS 900W offers both 802 11b wireless and Ethernet Fast Ethernet connectivity making the DCS 900W easy to integrate into your existing network environment The DCS 900W works with a 10Mbps Ethernet based network or 100Mbps Fast Ethernet based network for traditional wired environments and works with 802 11b routers or access points for added flexibility Maximum wireless signal rate based on IEEE Standard 802 11b specifications Actual data throughput will vary Network conditions and environmental factors including volume of network traffic building materials and construction and network overhead lower actual data throughput rate Features amp Benefits continued Web Configuration Using a standard Web browser Administrators can configure and manage the Internet Camera directly from its own Web page via the Intranet or Internet This means you can access your DCS 900W at anytime from anywhere in the world Remote Monitoring Utility The IPView Lite application adds enhanced features and functionality for the Internet Camera and allows administrators to configure and a
41. assword for security purposes Once the User Name and Password are defined only the Administrator has access to the management of IPView Lite applications This procedure should be done as soon as possible to prevent unauthorized usage of the IP View Lite application D Login D Link Bark dreg Mertaurha for People User Name Password To change the administrator User Name and Password select Tools gt Options The Options dialog box will appear see below User Name admin Password Confirm Cancel Enter a User Name and enter the Password twice Once all the new details are entered click OK 47 IPView Lite continued How to Change the IP Address Changing the IP Address To change an IP Address for a camera select Camera gt Add An Add Camera dialog box will appear see below D Add Camera IP Address Click on Browse The Browse Camera dialog box will appear with a blank screen see below D Browse Camera 48 IPView Lite continued How to Change the IP Address Click Search IPView Lite will detect and search all the available cameras that are installed on the local area network example below D Browse Camera MAC Address TOO FF 4F 57 40 CC 192 168 0 20 Change IF Search Cancel Highlight the camera you wish to change and click Change IP If you have already chnaged the administrator user ID and password you will be prompted to enter your admin ID a
42. camera and update firmware in this section Please refer to the DCS 900W Configuration section under Tools Default on P 38 for further details D Camera Property General IF Assignment DNS Wireless Misc Image User Date Time Information il Recording Reset Reboot the camera server Reboot and reset properties to default value Factory Reset Update Firmware Firmware Browse Update Upgrade Firmware Enter the full path of the firmware binary file name in the Update Firmware field or you can click on the Browse button to select the file Once the firmware file is entered click on the Update button to proceed with the update process Once completed click OK Warning The download firmware procedure cannot be interrupted If the network connection is broken during the download procedure it could cause serious damage to the Internet Camera 64 IPView Lite continued Camera Property Settings gt Recording Recording Options Manual Recording If the Manual Recording option is chosen you must manually start recording in the List view of the DCS 900W in the Menu Bar or by clicking on the Record Icon Choose Round the Clock to enable the DCS 900W to record all video frames continuously to your hard drive Larger files will be generated if Round the Clock Manual Recording is chosen The Dynamic Recording option records specific video frames based on how much movement there is in the video captured
43. camera on your network the installation is an easy 4 step procedure Identify Your Camera on the Network Assign a Local IP Address for Your Camera Determine Your Router s WAN IP Address Enable Remote Viewing Open Virtual Server Ports for Your Router Enable Remote Viewing DOLAN Multiple Camera Installation If you are installing multiple cameras on your network the installation is an easy 5 step procedure Identify Your Camera on the Network Assign a Local IP Address for Your Camera Open a Second Port on the Camera Determine Your Router s WAN IP Address Enable Remote Viewing Open Virtual Server Ports for Your Router Enable Remote Viewing OQ NZ A gt 27 DCS 900W Configuration continued Installing the DCS 900W Behind a Router 1 Identify Your Camera on the Network Once you are logged into the camera via a Web browser on your network PC click on the Advanced Tab and select System Enter a unique Camera Name and Location These settings are important if you are installing several cameras on your network D Link Building Networks for Peoole DCS 900W Wireless Internet Camera Enter a Unique camera name and EIET I location IP Address 192 168 0 20 Subnet Mask 255 255 255 0 Tools Status Hel Default Gateway 192 168 0 1 Identify Your Camera on Your Network 2 Assign a Local IP Address for Your Camera A Local IP Address is required to
44. ccess the Internet Camera from a remote site via Intranet or Internet Other features include image monitoring recording images to a hard drive enabling motion detection updating firmware viewing up to 4 cameras on one screen and taking snapshots Broad Range of Applications With today s high speed Internet services the Internet Camera can provide the ideal solution for live video images over the Intranet and Internet for remote monitoring The Internet Camera allows remote access from a Web browser for live image viewing and allows the administrator to manage and control the Internet Camera at anytime from anywhere in the world Many applications exist including industrial and public monitoring of homes offices banks hospitals child care centers and amusement parks Connections Rear Panel view 802 11b Antenna Ethernet Cable Connector Reset Button DC Power Connector 802 11b Antenna The DCS 900W features an 802 11b wireless antenna for 802 11b wireless connectivity to your existing wireless network The DCS 900W can be used in conjuction with an 802 11b compliant access point or router EthernetCable Connector The DCS 900W features an RJ 45 connector for connections to 10Base T Ethernet cabling or 100Base TX Fast Ethernet cabling which should be Category 5 UTP cable The port supports the NWay protocol allowing the DCS 900W to automatically detect or negotiate the transmission speed of the network
45. ck Next Cancel Hardware Installation The software you are installing tor this hardware Sound video and game controllers If your sound card or video card has not passed Windows Logo testing this window will appear has not passed Windows Logo testing to verify its compatibility with Windows XP Tell me why this testing is important Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that pou stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Click Continue Anyway If there are previously installed target files that are newer than the source files do NOT overwrite them Confirm File Replace Source E WINDOWS MPG4ds32 ax Target E WINDOWS System32 MPG4ds32 ax The target file exists and is newer than the source Overwrite the newer file Click No 43 IPView Lite Application Installation continued InstallShield Wizard InstallShield Wizard Complete Setup has finished installing IP iew Lite on your computer Click Finish After successfully installing the IP View Lite the application program for the DCS 900W is automatically installed to Programs IPViewLite Directory To start running the IP View Lite click on windows Start gt Progra
46. e Application Click on windows Start Menu Programs IPView Uninstall IPView Lite A new prompt screen will be displayed like the one below confirming the removal InstallShield Wizard Setup Type Choose the setup type that best suits your needs Uninstall C Reinstall Cancel Choose the option that you want and click Next to continue the process or click on Cancel to reject the uninstall process After you click on Next a Confirm Uninstall dialog box will appear Click OK to continue the process Contirm Uninstall Do you want to completely remove the selected application and all of its components 78 Uninstall IPView Application continued The InstallShield Wizard prompt will appear Click Finish to complete the uninstallation procedure Installshield Wizard InstallShield Wizard Complete The InstallShield Wizard has successfully installed IPView Before you can use the program you must restart your computer amp Yes I want to restart my computer now C No will restart my computer later Remove any disks from their drives and then click Finish to complete setup lt Back Cancel 79 Appendix Frequently Asked Questions Internet Camera Features Q What is a Wireless Internet Camera A The Internet Camera is a standalone system connecting directly to an Ethernet or Fast Ethernet network and supported by the wireless transmission based on the IEEE 802 11b standard I
47. e Virtual Server Ports of your router must be opened for remote access to your camera This is also referred to as port forwarding Please proceed as follows e Select Enabled to enable virtual server settings Select a camera name Enter your camera s Local IP Address in the Private IP field Select TCP under Protocol Type If you are using the default camera port settings enter 80 in to the Public and Private Port section e Schedule should be set to Always so that the camera images can be accessed at any time e Inthe Virtual Servers List a check mark appearing before the camera name will indicate that the ports are enabled e Click Apply to save your settings Note If you are installing multiple cameras be sure to open a port per additional camera installed port 81 82 etc for web server Tools Status Help irtua NE Virtual Server is used to allow Internet users access to LAN services Ki amp Enabled Disabled Name Local Security Camera 3 Applications Private IP 1192 168 0 25 Protocol Type TCP Filters Private Port 82 Public Pot 82 Schedule Always From time 00 00 AM to 00 00 W Am Firewall day Sun to Sun wi DMZ Performance J 9 tual Servers I Apply Cancel Help Name Private IP Protocol Schedule Local Security Camera 1 192 168 0 35 TCP 84 84 always dig Local Security Camera 1 192 168 0 35 TCP 6485 6485 alway
48. e ere ee ere ere err eee rere cere tere ere eee eee eer ere ere tree eer ee reer eee eee eee eee eee ee eee eee ee ere eee eee eee eee eee eee eee ee eed 67 IPView Lite continued Camera Property Settings gt Recording File Options You can adjust the maximum file size by clicking on File Size from the Recording File Options field The file size must be between 10 and 50MB If the recorded video files reach the file size allocated video images will be recorded into another file automatically Be sure to click Apply to save your settings then click OK to exit this screen Note fyou are using Windows Media Viewer to view your recorded videos make sure that you have the most up to date version in order to view the videos correctly D Camera Property General IP Assignment DNS misc Image User Date Time Information Tools Recording Recording Options Manual Recording f t C Schedule Recording File Options File Size File Path Path Working E Program Files IPView Lite E Program Files IPView Lite E Program Files IP iew Lite E Program Files P iew Lite met oy _ File Path The software will create a folder in the Recording File Path specified and record the video images with the file name by date and time Multiple file paths can be specified to store your video images The current path where recorded images are being stored is designated as Working Once this path has reached
49. ed hr OK Cancel Note Selecting the Recycle option will disable the Recording File Path Settings in the Recording menu 74 IPView Lite continued Menu Bar gt Tools Networking Configuration If your LAN uses a Proxy server to connect to the Internet select Use a proxy for HTTP Protocol and click OK If you choose this option you must enter the IP address and port that your Proxy server uses to connect to the Internet A Proxy server is a computer on your LAN that connects to the Internet without compromising the security of your internal network proxy server Is normally used on a network to more efficiently manage Internet traffic for groups of users If you are not sure how your LAN connects to the Internet contact your system administrator Proxy server Use proxy for HTTP Protocol OF Cancel Menu Bar gt About Under About on the menu bar click About for camera details such as software version D PViewLite New Configuration File View Camera Tools About 308 808 DE Name IP Address MAC Address Location Local Time Status 2 D Link D 5 900 192 168 0 20 00 03 16 05 08 OO 2002 1 1 1 10 53 Enable 5 75 IPView Lite Icon Description L Open a new file The hot key is Ctrl N 4 Open an existing file The hot key is Ctrl 0 E Save a file The hot key is Ctrl S List view format The hot key is Ctrl F1 _ 1 Camera view format The hot key is Ctrl F3 os 4
50. erhead lower actual data throughput rate 94 Contacting Technical Support Technical Support You can find software updates and user documentation on the D Link website D Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product U S and Canadian customers can contact D Link technical support through our web site or by phone Tech Support for customers within the United States D Link Technical Support over the Telephone 877 453 5465 24 hours a day seven days a week D Link Technical Support over the Internet http support dlink com email support dlink com Tech Support for customers within Canada D Link Technical Support over the Telephone 800 361 5265 Monday to Friday 7 30am to 12 00am EST D Link Technical Support over the Internet http support dlink ca email support dlink ca When contacting technical support please provide the following information e Serial number of the unit e Model number or product name e Software type and version number 95 Warranty Subject to the terms and conditions set forth herein D Link Systems Inc D Link provides this Limited warranty for its product only to the person or entity that originally purchased the product from e D Link or its authorized reseller or distributor and e Products purchased and delivered within the fifty states of the United States the Distr
51. gt IP Assignment IP Assignment If you need to change your IP Address select the IP Address tab in the Camera property window There are two options Manually Assign or Assign Automatically Using Please refer to theDCS 900W Configuration section Advanced System on P 19 for further details BD Camera Property Information Tools Recording fe Manually Assign IP Address 1 92 168 0 20 Subnet Mask 255 255 255 0 Default Gateway 0 0 0 0 f Automatic Assign BARP C BOOTP 57 IPView Lite continued Camera Property Settings gt DNS DNS DNS Domain Name System server is an Internet service that translates domain names into IP Addresses Please refer to the DCS 900W Configuration section under Advanced System on P 19 for further details D Camera Property Tools Recording Information DNS wireless Misc Image User DateTime General IP Assignment ONS Server 1 DAIS Server 2 mes 58 IPView Lite continued Camera Property Settings gt Wireless Wireless Your camera s wireless settings must correspond to your network settings for a proper and successful connection to the DCS 900W Please refer to the DCS 900W Configuration section under Advanced System on P 19 for further details D Camera Property Information Tools Recording Gener al IP Assignment DNS Wireless Misc Image User Date Time Connection Mode tr Infrastructure
52. he network with the same IP address You will need to run the Install Wizard again and change the IP address of the camera A2 Other possible problems might be due to the network cable Try replacing your network cable Test the network interface of the product by connecting a local computer to the unit utilizing a standard Crossover hub to hub Cable If the problem is not solved the Internet Camera might be faulty 81 Troubleshooting continued Internet Camera Installation Q Why does the Power LED not light up constantly A The power supply used might be at fault Confirm that you are using the provided power supply which is DC 5V for the Internet Camera and verify that the power supply is well connected Also the LED could have been configured to turn off Q Why does the LAN LED not light up properly A1 There might be a problem with the network cable To confirm that the cables are working PING the address of a known device on the network If the cabling is OK and your network is reachable you should receive a reply similar to the following bytes 32 time 2 ms Also the LED could have been configured to turn off A2 The network device utilized by the Internet Camera is not functioning properly such as hubs or switches Confirm the power for the devices are well connected and functioning properly Q Why does the Internet Camera work locally but not externally A1 Might be caused from the firewall
53. ict of Columbia U S Possessions or Protectorates U S Military Installations addresses with an APO or FPO Limited Warranty D Link warrants that the hardware portion of the D Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product for the period set forth below applicable to the product type Warranty Period except as otherwise stated herein 1 Year Limited Warranty for the Product s is defined as follows e Hardware excluding power supplies and fans One 1 Year Power Supplies and Fans One 1 Year e Spare parts and spare kits Ninety 90 days D Link s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D Link s sole discretion Such repair or replacement will be rendered by D Link at an Authorized D Link Service Office The replacement Hardware need not be new or have an identical make model or part D Link may in its sole discretion replace the defective Hardware or any part thereof with any reconditioned product that D Link reasonably determines is substantially equivalent or superior in all material respects to the defective Hardware Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase If a material defect is incapable of correction or if D
54. k for the Software Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase If a material non conformance is incapable of correction or if D Link determines in its sole discretion that it is not practical to replace the non conforming Software the price paid by the original licensee for the non conforming Software will be refunded by D Link provided that the non conforming Software and all copies thereof is first returned to D Link The license granted respecting any Software for which a refund is given automatically terminates Non Applicability of Warranty The Limited Warranty provided hereunder for hardware and software of D Link s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D Link the sellers or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case the product is being sold As Is without any warranty whatsoever including without limitation the Limited Warranty as described herein notwithstanding anything stated herein to the contrary Submitting A Claim The customer shall return the product to the original purchase point based on its return policy In case the return policy period has expired and the product is within warranty the customer shall submit a claim to D Link as outlined below
55. llow the Administrator to customize the LEDs for discreet camera operation in surveillance scenarios In Normal Mode the LED indicator functions normally Under Off Mode the LED indicators are both OFF during active monitoring In Dummy Mode the LEDs are active and monitoring is either active or inactive Loading ActiveX From This field is used to specify the location of Xplug Control ActiveX plug in program Enter the information as required in ocx format for example http www lt your company gt com xplug ocx where lt your company gt must be replaced with your company s DNS server Instructions for installing ActiveX from the driver CD is included in this manual Please refer to the Appendix Open Second Port The Open Second Port option is used when multiple cameras are being installed on a network OR if you need to use a port other than the default Port 80 If you are installing only one camera and wish to use the default ports you do not have to open a second port on your camera If you are installing a camera behind a router you must also open a port on your router for remote viewing of your camera For detailed instructions on how to do this please refer to the next section of this manual on how to install the DCS 900W with arouter For each additional camera that is installed you must select the Open Second Port option and assign the approriate Web server and Transfer Image Ports for each camera to enable remote viewing
56. lt in larger files with higher video quality The default setting is Medium Frame Rate Select the frame rate desired Use the default setting of Auto for optimal results Brightness Control Allows you to adjust the brightness level The default setting is 64 Contrast Control Allows you to adjust the contrast level The default setting is 64 Hue Control Allows you to adjust the hue level The default setting is 64 33 DCS 900W Configuration continued Advanced gt Video Light Frequency Adjust the light frequency to suit your area of operation 50 Hz and 60 Hz variants are available to accommodate the different light frequencies found in USA 60 Hz and Europe 50 Hz for optimal image quality Apply Cancel After making sure all your settings are correct click on Apply to store the settings You can alternatively click on Cancel to restore all settings to the values last saved to or retrieved from the DCS 900W Tools gt Admin The Tools gt Admin menu allows the system administrator to assign users permission to monitor the DCS 900W from a remote site Click on Tools then Admin in the left hand panel to access the Admin menu Z DCS 900W DCS 900W Microsoft Internet Explorer MEN File Edit View Favorites Tools Help Q sek Q x a A P Search Ie Favorites Y media 4 f r oe Address http 192 168 0 20 Go Links gt gt DCS 900W Wireless Internet Camera o
57. m Reconfirm Click Next 2 Setup Wizard 13 Using the Setup Wizard continued The IP Address Subnet Mask of your camera Gateway and DNS addresses must correspond Setup Wizard with your network settings for Set IP Address you to access the camera If you are unsure of what these IP Address feroa settings should be please check with your network administrator Subnet Mask 55255 2550 OO Default Gateway 19216801 DNS 1 19215281 DNS 2 9222 0000 ege The Connection Mode depends on how your camera is connected to your network Click Infrastructure for use Wireless Interface with a router or Adhoc for a Setup Wizard peer to peer connection The a yal A oc Network Name Wireless Network Name SSID efault Channel and Encryption Keys assstner e MUST correspond with your Old Encryption WEP Key E ASCII HEX wireless network settings for the camera to work Click Next l Change Encryption WEP Key New Encryption WEP Key Reconfirm WEP Key 14 Using the Setup Wizard continued If you need to make any changes click Back to modify your camera settings Otherwise click Restart to save and apply your settings Your setup is now complete Click Link to launch your Web browser and view your images Click Link Your camera is now displayed in the Web browser pk Setup Wizard AdminID SEa Password IP Address 19216800 Subnet 255
58. ms gt IPViewLite gt IPViewLite D Login D Link Get re erteearic tor Enter the default User Name admin into the respective field and click on OK to log into the application Click OK User Name Password Cancel 44 IPView Lite Application Installation continued Once logged in the IPView Lite application is executed and the IP View Lite interface will appear in the default List View format BK D IPViewLite New Configuration nDeadlao8ra g225005 ao IP Address MAC Address Location Local Time Status gt IT 72003 1 02 PH 45 pe IPView Lite This section describes the operation of the IP View Lite application User Interface with detailed procedures for using the application IPView Lite IPView Lite allows you to manage your cameras by enabling you to search configure and preview all the DCS 900Ws from one location It is designed with a user friendly interface for ease of control and navigation D IPViewLite New Configuration Eile Viem Camera Tools About n dd aude ee aoue IF Address MAC Address Location Local Time Status 4 D Link DC5 900 192 168 0 20 000316080800 2002 1 1 1 10 53 List view format E g1 772003 1 02 FPM 46 IPView Lite continued How to Change the Password Change Password When IPView Lite is used for the first time it is highly recommended that the Administrator change the User Name and P
59. nage the camera Add up to 4 additional Cameras for viewing The Camera menu also allows you to Delete a camera manage the Property Enable real time video capture or take a Snap shot image D PViewlite New Configuration File View Camera Tools About 3 cy E r Add Shift Ins Mame Delete ba Location Local Time Status D gt D Link Di Property F2 0003 1608 08 00 2002 1 1 1 10 53 Enable s Enable F3 G Snap shot F5 be Start Enable Function By default the video image is enabled There will be a check next to the Enable command to show that the Enable function is working To disable the real time image select Camera gt Enable and the real time video image will stop and shutdown Menu Bar gt Tools Tools on the menu bar allows you to change account information and system configuration From the menu bar select Tools gt Options D PViewLite New Configuration File View Camera Tools About BAG ja dem m pw Mame IP Address MAC Address Location Local Time Status D gt D Link DCS 900 197 166 0 20 00 03 16 08 08 00 2002 1 1 1 10 53 Enable 72 IPView Lite continued Menu Bar gt Tools Account The account menu is for administrators to change user name and password User Name admin Password Confirm Cancel System Configuration This menu allows you to set overwrite options to overwrite old recorded files with new recorded files Check the Load Last Configuration
60. nd password before IP View Lite will allow you to change the IP Address for the DCS 900W D Change IP Address IP Address Subnet Mask Default Gateway Enter the new IP Address the Subnet Mask and the Default gateway into the respective fields and click OK IPView Lite will apply the new IP Address to the camera 49 IPView Lite continued How to Add a Camera To add a new camera select Camera gt Add from the IPView Lite An Add Camera dialog box will appear See below D add Camera IP Address Enter the IP Address of the camera in the specified field and click Add If the IP Address is entered incorrectly or if you have a bad network connection a dialog box will appear to notify you of the error To add cameras in IPView Lite check that you have your network configured correctly To add a remote camera you need to have Internet access IPView Lite Invalid IP Address The value should between 0 and 255 If you are unsure of the IP Address of the camera you can click on Browse to search for cameras on your local area network The Browse Camera dialog box will appear with a blank screen See below Note Only cameras on your local area network can be located using Browse in IPView Lite If you want to add a camera via the Internet you must enter in a physical IP Address Remember that if your camera is behind a router you will need to enter your router s WAN IP followed by a colon then the port
61. net Explorer File Edit View Favorites Tools Help OQ O 2 a A J gt search JF Favorites QP reds A 2 Ea E Address E http 192 168 0 20 Go DCS 900W Wireless Internet Camera 2003 01 01 00 04 54 Done Internet 32 DCS 900W Configuration continued Advanced gt Video The Video menu allows you to control and adjust the image settings for your DCS 900W Click on Video on the left hand panel and the Image screen will appear as shown in the following illustration E DCS 900W DCS 900W Microsoft Internet Explorer File Edit View Favorites Tools Help Fo 4 A i aA O Q Back gt x a A gt Search se Favori tes a Media Cy G E Address http 192 168 0 20 si aca a DCS 900W Wireless Internet Camera Video Setting Video Resolution 320 x 240 0640 x 480 Compression Rate O Very Low OLow OG Medium OHigh O Very High Frame Rate Q01 05 O7 O15 020 Auto Frames Sec Brightness Control 64 Contrast Control 19 64 Saturation Control 10 64 Light Frequency O50Hz 60Hz O o Apply Cancel Done M Internet Video Resolution Select the desired video resolution format 320x240 default or 640x480 Compression Rate Select the desired compression rate ranging from very low to very high Higher video compression rates will generate more compact file sizes with less video quality and lower video compression will resu
62. ngs or from vanced gt System ied 2 g settings you have made manually Note Please refer to the Appendix for instructions on how to install ActiveX 39 DCS 900W Configuration continued Java Click on Java from the Home screen to access the video images from the Internet Explorer or Netscape browser as illustrated below CS 574DCC DCS 900W Microsoft Internet Explorer File Edit View Favorites Tools Help Q sex Y x a A po Search SF Favorites A media E B ee S be Address http 192 168 0 20 Camera Name The Camera name will be displayed when the i Camera Name field is PERLA fi 1 DCS 900W changed in the Web Je ee Configuration setting C5 900W 2003 01 01 00 25 06 under Advanced gt System Wireless Internet Camera Location The location of the DCS 900W will be displayed when the Location field is changed in the Web Configuration settings under Advanced gt System Date Time The date time of the DCS 900W will be displayed according to your time server settings or from your manual settings 40 IPView Lite Application Installation IP View Lite software is included for administrators to manage up to 4 DCS 900Ws remotely record to hard drive and configure advanced settings for the DCS 900W IPView Lite is a complete software management tool for the DCS 900W and includes all configurable settings available in the web configuration utility Insert the CD RO
63. number that is assigned to your camera i e 10 10 10 80 800 where 10 10 10 80 is your router s WAN IP and 800 is the port that your camera IS using Please refer to the DCS 900W Configuration Installation Behind a Router section of this manual for details on P 27 D Browse Camera IPView Lite continued How to Add a Camera Click on Search IPView Lite will detect and search for all the available cameras that are installed on the local area network D Browse Camera OO FF 4F 57 4D CE 192 168 0 20 Add ChangelP i Cancel Highlight the camera you wish to add and click on Add The Add Camera dialog box will appear once again with the IP Address entered Click on Add The camera will automatically be added into the IP View Lite list view Alternatively you can double click on the camera you wish to add and the Add Camera dialog box will appear once again with the IP Address entered Click on Add and the camera will automatically be added into the IP View Lite list view D Add Camera IP Address ad Cancel Browse 51 IPView Lite Getting Started continued How to Add Delete a Camera If the Login Camera dialog box appears make sure to enter the correct Username and Password Click OK The camera will be added into IPView Lite in list format If the Username and Password are entered incorrectly the camera will not be added into IP View Lite The Login Camera dialog box will appear only
64. ontinued Internet Camera Installation Q Can the DCS 900W be used outdoors A The DCS 900W is not weatherproof It is not recommended that you use the camera outdoors Q What network cabling is required for the Internet Camera A The Internet Camera uses Category 5 UTP Twisted pair cable allowing 10 Base T and 100 Base T networking Q Can the Internet Camera be setup as a PC cam on the computer A No the Internet Camera is used only on Ethernet and Fast Ethernet network and supported by wireless transmission Q Can the Internet Camera be connected on the network if it consists of only private IP Addresses A Yes the Internet Camera can be connected to a LAN with private IP Addresses Q Can the Internet Camera be installed if a firewall exists on the network A If a firewall exists on the network port 80 needs to be open If port 80 is not available a second port needs to be opened Optonal ports are 800 801 802 etc The corresponding port needs to be opened on the firewall as well Troubleshooting Q I cannot access the Internet Camera from a web browser A1 The possible cause might be the IP Address for the Internet Camera is already being used by another device To correct the possible problem you need to first disconnect the Internet Camera from the network Then run the PING utility follow the instructions in Appendix B PING Your IP Address If there is a reply it indicates that there is another device on t
65. ormat From the menu bar select Camera gt Stop The recording function will be stopped The other alternative is to right click the icon located on the upper left corner of the screen under the viewing mode of either 1 or 4 cameras a case sensitive menu will appear Select Stop The recording task will be stopped 55 IPView Lite continued Camera Property Settings gt General Once you have completed the initial configuration of the DCS 900W using the Web based interface you can review or change your configuration using either the Web based configuration utility or the Property Settings in the DCS 900W IP View Lite To access the Property Settings menu select Camera gt Property from the main menu A dialog box will appear which allows for Web Configuration settings and upgrading firmware The Camera Property dialog box will appear Select the desired options from the tab selections to configure the camera General Allows settings for the camera name location and administrator information such as administrator ID and password Please refer to the DCS 900W Configuration section under Advanced System on P 19 for further details D Camera Property Information Tools Recording General IP Assignment DNS Wireless Misc Image User Date Time Camera Hame iD 05 9004 Location Administrator Admin ID Admin Password Password Confirm 56 IPView Lite continued Camera Property Settings
66. os METTET Admin Admin ID Fe GE Admin Password Confirm Password Help Add User User Name User Passwg The default setting for Admin ID is blank Null String You need to key in the Admin ID witha maximum length of 12 Printable ASCIl characters Enter the Admin To confirm the Admin Password witha Password type in your maximum length of 8 password again Printable ASCII characters DCS 900W Configuration continued Tools gt Admin Add User User Name Enter the user name in this field A maximum of 8 user names are allowed however each user name must be different Each user name can be used as a group For example if the Username is Guest and the User Password is Guest anyone can access the DCS 900W using this information The maximum length for the User Name is 12 characters Printable ASCII User Password Enter the user s password you want to assign to the specific Username The maximum password length is 8 characters Printable ASCII To add a new Username input the necessary information first and click on Add Delete User Select the user you wish to delete from the pull down menu and click on the delete icon Important Information Once the administrator has added users for the DCS 900W users will be required to enter a login password to access the video image from the DCS 900W The password dialog box is illustrated below Enter Network Password 2 x
67. protection Check the Internet firewall with your system administrator The firewall may need to have some settings changed in order for the Internet Camera to be accessible outside your local LAN See page 27 for more information about installing your camera behind a router A2 Make sure that the Internet Camera isn t conflicting with any web server you may have running on your network A3 The default router setting might be a possible reason Check that the configuration of the router settings allow the Internet Camera to be accessed outside your local LAN Q Why does a series of broad vertical white lines appear through out the image A It could be that the CMOS sensor a square panel situated behind the lens that measures the light signals and changes it into a digital format so your computer can present it into an image that you are familiar with has become overloaded when it has been exposed to bright lights such as direct exposure to sunlight or halogen lights Reposition the Internet Camera into a more shaded area immediately as prolonged exposure to bright lights will damage the CMOS sensor 82 Troubleshooting continued Internet Camera Installation Q Noisy images occur How can I solve the problem A1 The video images might be noisy if the Internet Camera is used in a very low light environment To solve this issue you need more lighting Q The images are poor quality how can I improve the image quality A1 Make su
68. purchased from inventory clearance or liquidation sales or other sales in which D Link the sellers or the liquidators expressly disclaim their warranty obligation pertaining to the product Repair by anyone other than D Link or an Authorized D Link Service Office will void this Warranty Disclaimer of Other Warranties EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN THE PRODUCT IS PROVIDED AS IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY FITNESS FORA PARTICULAR PURPOSE AND NON INFRINGEMENT IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED INANY TERRITORY WHERE A PRODUCT IS SOLD THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY 90 DAYS EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN THE ENTIRE RISKAS TO THE QUALITY SELECTIONAND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT 97 Warranty continued Limitation of Liability TO THE MAXIMUM EXTENT PERMITTED BY LAW D LINK IS NOT LIABLE UNDER ANY CONTRACT NEGLIGENCE STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT INCONVENIENCE OR DAMAGES OF ANY CHARACTER WHETHER DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF GOODWILL LOSS OF REVENUE OR PROFIT WORK STOPPAGE COMPUTER FAILURE OR MALFUNCTION FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D LINK S PRODUCT IS CONNECTED WI
69. r DHCP Server you can Click Assign Automatically Using and click on RARP BOOTP or DHCP Under this setting the DCS 900W will automatically assign an IP Address from the RARP BOOTP or DHCP Server Each time the DCS 900W starts up be sure the RARP BOOTP or DHCP Server is set up to assign an IP address to your DCS 900W If your application requires direct connection from an ADSL modem through the DCS 900W s RJ 45 LAN port and you also have an ISP PPPoE account click on PPPoE and enter the Service Name User ID and Password into the respective fields The DCS 900W will get an IP Address from the ISP each time it starts up 21 DCS 900W Configuration continued Advanced gt System DNS IP Address DNS Domain Name Service is an Internet service that translates domain names ie www dlink com into IP Addresses ie 192 168 0 20 The DNS IP Address can be obtained from your ISP DCS 900W DCS 900W Microsoft Internet Explorer File Edit View Favorites Tools Help ay Q pack amp x a A gt Search SF Favorites P media A vag G E Address http 192 168 0 20 Go Links gt D Link Building Networks for Peoole DCS 900W Wireless Internet Camera O PPPoE Service Name sm l User ID Password DNS IP Address gt 1 0 0 0 0 2 0 0 0 0 i Dynamic DNS O Yes ONo Service Provider DynDNS org Dynamic Host Name denisecam dyndns org User Name Email ddo i Password Key se
70. re that your computer s display properties are set to at least 16 bit color Using 16 or 256 colors on your computer will produce dithering artifacts in the image making the image look as if it has bad quality A2 The configuration on the Internet Camera image display is incorrect Through the Web Configuration Video section of the web management see P 33 you need to adjust the image related parameters for improved images such as brightness contrast hue and light frequency Please refer to the Web Configuration section for detailed information Q There are no images available through the Web browser A1 The ActiveX might be disabled If you are viewing the images from Internet Explorer make sure ActiveX has been enabled in the Internet Options menu Alternatively you can use the Java Applet for viewing the required images A2 If you are using Windows XP please make sure that you have downloaded Java and installed it properly A3 Make sure that your Web browser supports Java If you are using Internet Explorer or Netscape Navigator with a version number of lower than 5 then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the Internet Camera 83 How to Ping Your IP Address The PING Packet Internet Groper command can determine whether a specific IP Address is accessible by sending a packet to the specific address and waiting for a reply It is a very useful tool to confirm
71. ropriate time server matching your region of operation The NTP server IP address listed below will set the time server http 192 6 38 127 NTP protocol is used primarily by Windows and Mac users Time Protocol is used by Linux users IP Address Enter the IP Address of the Time Server in this field The IP address will be listed with the time server information on the web 36 DCS 900W Configuration continued Tools gt Time Protocol Two options are available for linking with the Time Server The default setting is NTP Select the time for the Linux time server TimeZone The System administrator must select the time zone for the region Please refer to the Appendix for the time zone selection table To set the Time manually select Set Manually The system administrator must then enter the Date and Time in the respective field manually When Set Manually is selected each time the DCS 900W is powered off the time must be reset manually at reboot Apply Cancel After making sure all settings are correct click on the Apply icon to store the settings in the DCS 900W You can alternatively click on the Cancel icon if you do not wish to make changes to the DCS 900W 37 DCS 900W Configuration continued Tools gt Default The Default tab contains commands for restarting the DCS 900W Click on Tools then the Default tab in the left hand panel and the Tools screen will appear as illustrated below DCS 900W
72. rvice is available for US Customers Only B Visit support dlink com InstallShield Wizard Welcome to the InstallShield Wizard for DCS 900 Series Setup Wizard The InstallShield Wizard will install DCS 900 Series Setup Wizard on your computer To continue click Next Click Next 11 Using the Setup Wizard continued Click Yes Click Next Click Finish I Installshield Wizard License Agreement Please read the following license agreement carefully Installshield I InstallShield Wizard Choose Destination Location Select folder where Setup will install files InstallShield InstallShield Wizard InstallShield Wizard Complete Setup has finished installing DCS 900 Series Setup Wizard on your computer 12 Using the Setup Wizard continued To run the Setup Wizard click on Start gt Programs gt DCS 900W Series Setup Wizard Setup Wizard Your camera s IP Address will be displayed here if it is valid Click Wizard to begin You must change the Admin ID and Password immediately to protect your camera against unauthorized access By default the Admin ID and Set up an Admin ID and Password to secure your camera Password are blank To change the CICK Next to continus Admin ID and Password select both Admini Password Change boxes and enter a New ID r Change r Change and New Password NewiD TT New Password P Reconfir
73. s ii Local Security Camera 2 192 168 0 30 TCP 83 83 always Ahi Local Security Camera 2 192 168 0 30 TCP 8484 6464 always ii Opening Virtual Server Ports on Your Router 31 DCS 900W Configuration continued Installing the DCS 900W Behind a Router IMPORTANT NOTE Some ISPs may block access to port 80 Be sure to check with your ISP so that you can open the appropriate ports accordingly Some ISPs block traffic on commonly used ports to conserve bandwidth If your ISP does not pass traffic on port 80 you will need to change the service port the camera uses from 80 to something else like 800 If you are behind a residential gateway you will need to open the corresponding port on your gateway as well Not all Gateways are the same so refer to your user s manual for specific instructions on how to forward ports Viewing Your Camera After all settings have been entered correctly a user inside or outside your network will have access to the camera through a standard Web browser To access from the Internet simply type in the IP Address of the router given to you by your ISP acolon and the port number that you gave your camera Ex http 205 163 122 96 83 To access from a computer on your local home network simply enter the local IP Address of your camera i e 192 168 0 20 If using a port other than port 80 you must enter the IP address followed by a colon and the assigned port number DCS 900W DCS 900W Microsoft Inter
74. sseese Wireless Interface Connection Mode Infrastructure O Adhoc M Internet Dynamic DNS The DCS 900W supports Dynamic DNS which means that you can obtain and assign an easy to remember static address for your camera like www mycamera com through a free service such as www dyndns org This means that no matter how often your camera s IP changes you will always be able to access your camera using your unique assigned name such as www mycamera myddns com 22 DCS 900W Configuration continued Advanced gt System Wireless Interface Connection Mode Use the Connection Mode to determine the type of wireless communication for the Internet Camera There are three choices Infrastructure mode 802 11 Adhoc mode and Adhoc mode The default setting for the Connection Mode is Infrastructure DCS 900W DCS 900W Microsoft Internet Explorer File Edit View Favorites Tools Help ay Y a r A Z La A hed Back gt a A A Search we Favorites a Media g DS G E Address http 192 168 0 20 v Go Links gt D Link Building Networks for Peoole DCS 900W Wireless Internet Camera Network Name default SSID Wireless Channel 6 M WEP Encryption O Disable O 64 bits O 128 bits WEP Key ASCIL OHEX Confirm WEP Key LED Control G Normal OOFF O Dummy Loading ActiveX From Open Second Port OYes ONo 1 Web Server Default 80 4 0 2 Transfer Image
75. t is different from the conventional PC Camera the Internet Camera is an all in one system with built in CPU and web based solutions providing a low cost solution that can transmit high quality video images for monitoring The Internet Camera can be managed remotely accessed and controlled from any PC Notebook over the Intranet or Internet via a web browser Q What is the maximum number of users that can be allowed to access DCS 900W simultaneously A Maximum number of users that can log onto the Internet Camera at the same time is 8 Please keep in mind the overall performance of the transmission speed will slow down when multiple users are logged on simultaneously Q What algorithm is used to compress the digital image A The DCS 900W utilizes MJPEG image compression technology providing high quality images MJPEG Is a standard for image compression and can be applied to various web browser and application software without the need to install extra software Q Can I capture still images from the Internet Camera A Yes you are able to capture still images with the snapshot function from the IPView Lite application supplied with the Internet Camera CD ROM You may also use the first page that shows up when you type in the IP Address of the camera When viewing this page press the refresh button on your web browser to update the image Please refer to the User s Guide for detailed information 80 Frequently Asked Questions c
76. ternet Camera Web Configuration Java Enabled and Compliant Web Browser recommended e CPU Pentium III 450MHz or above e Memory Size 128MB recommended e VGA card resolution 800x600 or above IPView Lite Configuration e Windows XP Me 2000 98SE e CPU Pentium Ill 850MHz or above e Memory Size 128MB 256MB recommended e VGA card resolution 800 x 600 or above 3 Introduction Congratulations on your purchase of the DCS 900W Internet Camera The DCS 900W is a versatile and unique solution for your small office or home Unlike a PC Camera the DCS 900W is a stand alone system with a built in CPU and Web server that trans mits high quality video images for monitoring The DCS 900W can be accessed re motely and controlled from any PC Notebook over the Intranet or Internet via a web browser The simple installation procedure and intuitive web based interface offer easy integration with your Ethernet Fast Ethernet or 802 11b wireless network The DCS 900W also comes with remote monitoring capability for a complete and cost effective home security solution Features amp Benefits Simple to Use The DCS 900W is a stand alone system with a built in CPU requiring no special hardware or software such as PC frame grabber cards The DCS 900W supports both Activex mode for Internet Explorer and Java mode for Internet Explorer and Netscape Navigator All that is required is a computer with current Web browser software Supports a V
77. tomatically pad your input to a bit count of 64 or 128 In the Confirm WEP Key field input the same characters that were inputted in the Encryption Code field Make sure the Encryption Code matches the Access Point s encryption code when the Internet Camera is connected in Infrastructure mode Your PC Notebook s encryption code also needs to match the encryption code used by the Internet Camera in either Infrastructure mode or Ad hoc mode By default an Encryption key is not assigned to the DCS 1000W Therefore to secure the wireless transmission be sure to enable the Encryption Key by entering the relevant data Note Be sure to carefully input and document the Encryption Code input errors will cause the communication link to fail LED Control The LED control allows you to set up the LED illumination as desired This feature provides flexibility when surveillance activity is ON There are three options as follows Normal Power LED indicator is steady ON LAN When LAN activity is present the LED indicator will flash steadily ON OFF Power LED indicator is off LAN LED indicator is off Dummy Power LED indicator is steady ON LAN LED indicator is ON with random flashing 24 DCS 900W Configuration continued Advanced gt System The default setting for the LED control is Normal When you have configured the LED control the correct illumination will be applied after 1 minute Note The three LED options a
78. ton to activate 3 HM he installation procedure for the plug 2 4GHz Wireless n program Once executed a prompt Mp GE ill appear requesting the input of the M E Jesired language selection Make the Jesired selection and click on OK Building Networks for People pb Install Adobe Reader gt Install ZoneAlarm Pro his service is available for US Customers Only B Visit support dlink com 89 Installation of the X Plug to a Local PC continued InstallShield Wizard Welcome to the InstallShield Wizard for Xplug Control The InstallShield Wizard will install Xplug Control on your computer To continue click Next Click Next Cancel InstallShield Wizard License Agreement Please read the following license agreement carefully Press the PAGE DOWN key to see the rest of the agreement D Link Corporation End User License Agreement NOTICE TO USER THIS IS A CONTRACT BY INSTALLING DOWNLOADING OR USING THIS SOFTWARE YOU ACCEPT THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT 1 Intellectual Property Rights This xplug ocx the software is copyrighted and is proprietary product of D Link Corporation The software is also protected by United States Copyright Law and Do you accept all the terms of the preceding License Agreement If you choose No the setup will close To install Xplug Control you must accept this agreement InstallShield Click Yes 90
79. train user access to the DCS 900W since the Default settings are Null String no password Once the ID and Password are defined only the Administrator has access to the management of the DCS 900W This procedure should be done as soon as possible since the security features of the DCS 900W will not be enabled until the Admin ID and Admin Password is defined 10 Using the Setup Wizard Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process Insert the D Link DCS 900W CD into j your CD ROM drive D Link Q Network S 2 4GHz Wireless This Installer will guide you through the installation nt ern et C amera process You are only moments away from using your new D Link Networking Product Click Install Software View Quick Installation Guide View Manual Yahoo Premium Services This service is available for US Customers Only gt gt p ZoneAlarm Pro Security Software Only gt This service is available for US Customers Visit support dlink com D D Link Building Networks for People Network 2 4GHz Wireless This Installer will guide you through the installation Internet Ca mera process You are only moments away from using your new D Link Networking Product Click Install D gt instali Wizard Install Wizard Wizard P Install X Plug p gt Install IPView Lite gt Install Adobe Reader gt Install ZoneAlarm Pro his se

DCS-900W Configuration (continued) - D-Link

Contents

Download Pdf Manuals

Related Search

Related Contents