User manual Sedeo Pro+ - Handicare Mobility becomes Sunrise
Contents
1. Folding the backrest fully forward El 1 Loosen the knobs A at the lower back 2 Lift the backrest 60 up B Not Na The backrest is heavy SG A Warning Watch squeezing your fingers while lifting the backrest Rat 3 Fold B fully forward 12 Use Removing the standard legrest 1 Push A to the rear 2 Swing B to the side 3 Remove B 4 5 Setting up the seating system following transportation Positioning the standard legrest 1 Place the legrest A in the bracket 2 Swing the legrest inwards Sedeo Pro A Caution You should hear a click when replacing the legrest This indicates that the legrest has locked into place Positioning the backrest for use 1 Lift A upwards and backwards Due to its weight the backrest will fall into place 2 Tighten the star knobs B A Warning Watch squeezing your fingers while lifting the back Sedeo Pro Use 13 Positioning the armrest 1 Unlock the armrest A 2 Flip down the armrest B Positioning the seat cushion 1 Slide A and B over C and D 2 Push E downwards A Caution Ensure that C and D at the back of the seat hook under the bolt heads2. 14 Adjustments to be carried out by a professional Sedeo Pro 5 Adjustments to be carried out by a professional Note There are calibration marks on various parts of the seating system The ex factory settings are indicated 5 1 Seat width i ile 1 Unscrew A with use of a ring spanner and B 2 Adjust to desired seat width 3 Place A with use of a ring spanner and B in new holes and tighten ae ajo Fe Note First adjust one side then the other side 5 2 Seat depth Backrest adjustment 1 Loosen A by one turn 2 Adjust B to the desired position 3 Tighten A A Warning The stability of the wheelchair is influenced by the adjustment of the seating system s centre of gravity Such adjustments should be made by professionals only B 4x L R Seating system adjustment 1 Remove the seat see Use Reducing the seating system in size for transportation purposes Remove the screws B Move C and D Tighten the screws B Replace the seat see Use Setting up the seating system following transportation IRN Seden i 49 Sedeo Pro Adjustments to be carried out by a professional 15 5 3 Backrest he
3. Sedeo i 21 18 Adjustments to be carried out by a professional Sedeo Pro Calf pad height 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A 5 6 Electrical central legrest Lower leg length 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A A Caution Ensure that there is sufficient free space under B for the wheelchair to drive over obstacles Ankle angle 1 Flip up A 2 Turn B in order to adjust the ankle angle as desired 3 Fold A down Sedeo Pro Adjustments to be carried out by a professional 19 rag pad height 1 Lower the leg length Unscrew A 2x 3 Adjust B to desired height and move A to higher lower holes C 4 Tighten A 2x Calf pad height 2 1 Unscrew A 2 Adjust B to desired height and move A to higher lower hole 3 Tighten A Calf pad width 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A o TT 0 LI Era kb N Ga i 20 Adjustments to be carried out by a professio
4. User weight kg st 160 25 2 Seat width mm inch 380 600 15 23 6 Seat depth mm inch 440 600 15 7 23 6 Point of gravity mm inch 95 3 7 Backrest Backrest height mm inch 480 670 18 9 26 4 Backrest recline i 90 135 Armrest Armrest pad width mm inch 40 till 20 1 6 till 0 8 Armrest pad height from seat frame mm inch 240 360 9 4 14 2 Armrest pad depth controller bracket side mm inch 95 3 7 Armrest pad depth non controller bracket side mm inch 140 5 5 Side support Side cushion height mm inch 100 3 9 Central legrest Lower leg length with compressed seat cushion mm inch 330 495 13 19 5 Knee angle f 30 110 Ankle angle ii 20 till 40 Central calf support height option mm inch 120 4 7 Sedeo Pro Technical specifications 33 Electrically elevating central legrest Lower leg length with compressed seat cushion mm inch 365 530 14 4 20 9 Knee angle ig 94 170 Maximum length compensation mm inch 180 7 1 Ankle angle i 20 till 20 Calf support height mm inch 90 3 5 Width calf supports mm inch 350 430 13 8 16 9 Standard legrest set Lower leg length with compressed seat cushion mm inch 340 510 13 4 20 1 Knee angle i 70 Ankle angle ii O 180 Elevating and electrical elevating legrest
5. Make sure that the castor wheels do not touch the footplates when manoeuvring If this is the case the legrests must be brought forward There must be at least 1 cm between the castor wheels and the footplates Footplate angle 1 Loosen the Allen bolt C a few turns with a 6 mm Allen key so that the teeth of the hinge come completely free 2 Adjust the desired footplate angle D and push the hinge manually together again 3 Tighten the Allen bolt C securely Calf pad height 1 Loosen the Allen bolt A a few turns with a 4 mm Allen key 2 Slide the calf pad B in the desired position 3 Tighten the Allen bolt A securely Sedeo Pro Adjustments to be carried out by a professional 17 5 5 Central legrest Lower leg length 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A A Caution Ensure that there is sufficient free space under B for the wheelchair to drive over obstacles Knee angle 1 Loosen A by two turns 2 Adjust B to the desired angle 3 Tighten A by two turns A Caution Change the height or knee angle if the footplate touches the castor wheels Ankle angle 1 Flip up A 2 Turn B in order to adjust the ankle angle as desired 3 Fold A down DOL nie aje of ra
6. set Lower leg length with compressed seat cushion mm inch 340 530 13 4 20 9 Knee angle 70 0 Ankle angle 0 180 Calf support height mm inch 120 4 7 Headrest Headrest height memory mm inch 170 6 7 Headrest depth mm inch 180 7 1 Headrest vertical angle i 45 45 Headrest width standard headrest option mm inch 20 20 0 8 0 8 Headrest width width adjustable headrest option mm inch 110 110 4 3 4 3 Controller bracket Controller bracket height mm inch 60 2 4 Controller bracket depth mm inch 35 1 4 Controller bracket swing away Controller bracket height mm inch 50 2 Controller bracket depth mm inch 35 1 4 Controller position angle ig 0 45 Hemiplegia Hemiplegia armrest angle option d 0 45 Abduction support Abduction support height mm inch 60 120 2 4 4 7 Abduction support depth mm inch 60 110 2 4 4 3 Thoracic support Thoracic support width mm inch 60 O 2 4 0 Thoracic support height mm inch 200 400 7 9 15 7 Thoracic support depth mm inch 20 70 0 8 2 8 34 Warranty 9 Warranty The provisions of warranty and liability applicable to the seating system are identical to those incorporated in the wheelchair manual ELI Wheelchair Sedeo Pro Sedeo Pro 35 Dealer Serial number CE Ay handicare www handicare com
7. adjustment 1 Slacken all the straps a little before you begin to adjust the backrest Start the adjustments with the lowest straps and work upwards 2 Tighten or loosen the straps A so that the user gets the maximum comfort and support Sedeo Pro 5 13 Abduction support Adjust the abduction support as follows 1 Loosen the Torx screw 2 Adjust the part to the desired position 3 Tighten the Torx screw A a Height adjustment B b Depth adjustment 5 14 Thoracic support Adjust the thoracic support as follows 1 Loosen the Torx screw 2 Adjust the part to the desired position 3 Tighten the Torx screw A a Rough adjustment of width B b Height adjustment A a Adjustment of bracket depth B b Adjustment of cushion depth Adjustments to be carried out by a professional 27 28 Adjustments to be carried out by a professional Sedeo Pro A a Adjustment of cushion angle B b Fine adjustment of width 5 15 Attaching the lap strap SNL G Attaching to the seating frame 1 Tighten A through B into C C e i q B i Sedeo Pro Adjustments to be carried out by a professional 29 A Warning Ensure that the lap strap is adjusted to the wheelchair user The strap must fit snugly across the hips at an
8. angle of approximately 45 Ensure that the strap is clean at all times and that the locking mechanism is working properly The strap and the locking mechanism can be cleaned using a damp cloth If the strap is positioned above the hips and across the soft part of the user s belly then this can result in seating posture being incorrect and the user slumping in the seat Never use the lap strap as a seatbelt when using transport 30 Maintenance 6 Maintenance It is recommended that you have your wheelchair serviced by your dealer once a year or in the case of intensive use once every six months 6 1 Cleaning the upholstery Clean the upholstery using a damp cloth and household soap Then rub dry using a soft dry cloth PU parts Clean the armrests side cushions etc using a damp cloth and household soap Then dry the parts using a soft cloth Armrest cushion upholstery Covers are removable and washable Seat and backrest cushion upholstery Covers are removable and washable Follow the washing instructions on the covers For the incontinence cover see figure 1 For the comfort cover see figure 2 Sedeo Pro Stretch Rubber 58 Knitted Polyester 42 FR Polyurethane Fabric Backing 100 Polyester Coating 100 PVC Care instructions Do not use cleaning materials that contain solvents Waka A amp 9005849 handicare A Warning Do not use organic sol
9. reclining backrest Electrically reclining antishear backrest Electrically elevating legrests Electrically elevating central legrest Electrically elevatingcentrallegrestandelectric height adjustment Flip up armrests 9 Wheels turning and pivoting OO Ee NS 6 General description 3 General description 3 1 Sedeo Pro product description The wheelchair is fitted with a Sedeo Pro seating system The Sedeo Pro seating system provides excellent support for the head torso arms and legs Optimal body support ensures maximum independence for the wheelchair user The wheelchair must be adjusted by a qualified specialist Incorrect settings may have negative consequences for seating posture A Caution Please study this manual carefully before using the seating system Key to symbols Loosen by one turn with wing nut Tighten by one turn with wing nut T30 i Loosen by one turn with torx f Tighten by one turn with torx Ho Step 1 2 etc An arrow as part of an illustration indicates that the component in question moves or needs to be moved in the direction indicated Notes on Key to symbols Each illustration includes icons and numbering to indicate what needs to be done and in which order Sedeo Pro Sedeo Pro Use 7 4 Use 4 1 Adjustments by the user attendant Manually elevating legrest knee angle The angle of the manually elevating legrests can be adjusted indepe
10. USER MANUAL PEN SEDEO PRO Sp handicare 9010304A 2 Sedeo Pro 2014 Handicare All rights reserved The information provided herein may not be reproduced and or published in any form by print photoprint microfilm or any other means whatsoever electronically or mechanically without the prior written authorization of Handicare The information provided is based on general data concerning the construction known at the time of the publication of this manual Handicare executes a policy of continuous improvement and reserves the right to changes and modifications The information provided is valid for the product in its standard version Handicare can therefore not be held liable for any damage resulting from specifications of the product deviating from the standard configuration Illustrations contained in the manual may deviate from the configuration of your product The information made available has been prepared with all possible diligence but Handicare cannot be held liable for any errors contained in the information or the consequences thereof Handicare accepts no liability for loss resulting from work executed by third parties Names trade names trademarks etc used by Handicare may not as per the legislation concerning the protection of trade names be considered as being available 2014 01 Sedeo Pro Table of content Table of content 1 Introduction eee aaa ea aaa aaa emana ana aaa nea 1 1 This use
11. adjustment 24 Adjustments to be carried out by a professional Sedeo Pro 5 9 Headrest Adjusting the memory setting headrest height 1 Loosen A Loosen C by one turn Slide B into the desired position Slide D as far down as possible Tighten A Tighten C Dok W PP Headrest position 1 Loosen A by one turn 2 Adjust B to the desired position 3 Tighten A Note Correct the headrest height and tilt the headrest cushion as required Headrest cushion width 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A Sedeo Pro Adjustments to be carried out by a professional 25 5 10 Fixed swing away controller bracket Depth 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A Height 1 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A Height 2 1 Loosen C by one turn 2 Slide D into the desired position 3 Tighten C 26 Adjustments to be carried out by a professional Sedeo Pro 5 11 Backrest with adjustable straps flexible The sides of the backrest with adjustable straps can be adjusted as follows 1 Loosen the 8 Torx screws 2 Adjust the sides to the desired position 3 Tighten the 8 Torx screws 5 12 Velcro back curvature
12. ed in the applicable paragraphs Be carefull when swing away flip up parts Contact with moving parts should be avoided Take care when smoking Do not use wheelchair near open flame A Caution Parts of the wheelchair that are intended for service or repair to be removed without the use of tools e g armrest legrest can have an adverse effect on the support of the user if they are missing or not placed back in the right position 2 1 Temperature A Warning Avoid exposing the wheelchair to direct sunlight for extended periods of time Some parts of the wheelchair such as the seat the backrest and the armrests assembly complete can become hot if exposed to the sun for too long This may cause burns or skin irritation 2 2 Indicationsontheseatingsystem The wheelchair must not be lifted l up by the armrests assembly WO EO complete and or legrests Oo The stability of the wheelchair is AN influenced by the adjustment of the seating system s centre of gravity il Such adjustments should be made Z by professionals only 2 3 Moving parts A Warning Contact with the moving parts of the wheelchair should be avoided A wheelchair has moving and rotating parts Contact with moving parts may result in serious physical injury or damage to the wheelchair Moving rotating parts Electrically tilt adjustment Electrically high low adjustment Electrically
13. ide D onto E Note Ensure that the ridge on the terminal block falls into the opening 4 Adjust the depth of D and tighten A 5 Position the controller bracket and tighten Z B RI Armrest width 3 1 Loosen A 2 Position B into the desired position a Left Reduce armrest width Right Enlarge armrest width b Left Enlarge armrest width Right Reduce armrest width 3 Tighten A Sedeo Pro Adjustments to be carried out by a professional 23 Armrest horizontal angle 1 Loosen A 2 Adjust B to desired position By positioning A into different sliders of C an additional horizontal angle can be achieved Side cushion Adjust the side cushion as follows 1 Loosen the Torx screw 2 Adjust the part ot the desired position 3 Tighten the Torx screw A a Height adjustment B b Width adjustment C c Depth adjustment 5 8 Adjusting the centre of gravity A Warning Changing the wheelchair s centre of gravity may negatively influence the wheelchair s driving characteristics and or its dynamic stability Such adjustments should be made by professionals only 1 Loosen A by one turn 2 Slide B forwards or backwards 3 Tighten A Note If the user s weight distribution is average then the centre of gravity should be adjusted to the same setting as the seat depth For better sliding release the seat depth
14. ight Note First loosen the velcro backrest flap from the seat frame Height 1 1 Loosen the 8 screws A by one turn 2 Adjust the backrest to the desired position 3 Tighten the 8 screws A Height 2 1 Remove the 8 screws A left and right 2 Remove the 4 clamps of the backrest cushion 3 There are extra mounting holes in the wood of the backrest B Make holes in the fabric at the desired position Mount the clamps on the backrest 5 Mount the backrest on the frame by tighten the 8 screws A aN 5 4 Standard and manually elevating legrest Legrest width 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A 16 Adjustments to be carried out by a professional Sedeo Pro Lower leg length 1 Loosen the setscrew A a few turns with a 4 mm Allen key 2 Slide the footplate B in the desired position 3 Tighten the setscrew A securely A Caution Ensure that there is sufficient free space under B for the wheelchair to drive over obstacles Footplate depth The footplate is secured asymmetrically The left and right footplate can be exchanged 1 Loosen the setscrew A with a 4 mm Allen key 2 Remove the footplate together with the profile 3 Slide the footplate in the top tube of the other legrest 4 Tighten the setscrew A securely A Caution
15. nal Sedeo Pro Calf pad depth 1 Unscrew A 2 Adjust B to desired depth and move A to new hole 3 Tighten A 5 7 Armrest assembly Note Ensure that the arms are supported well without the shoulders being pushed upwards Armrest height 1 1 Loosen A by one turn 2 Adjust the armrest to the desired position 3 Tighten A Armrest height 2 1 Turn screw A to position the armrest height 2 Loosen B by one turn 3 Adjust the armrest angle 4 Tighten B Sedeo Pro Adjustments to be carried out by a professional 21 Armrest depth 1 Note In case you cannot access the bolts A first adjust the armrest angle 1 Loosen A by one turn 2 Slide B into the desired position 3 Tighten A Armrest depth 2 only armrest pad 40 cm 1 Loosen A 2 Position B into the desired position a Enlarge armrest depth b Reduce armrest depth 3 Tighten A Armrest width 1 Note In case you cannot access the bolts A first adjust the armrest angle 1 Loosen A by one turn 2 Slide B into the desired width 3 Tighten A 22 Adjustments to be carried out by a professional Sedeo Pro Armrest width 2 To remove 1 Remove A and B 2 Remove C and D To position 3 Sl
16. ndently of each other 1 Push handle A forwards 2 Lift your leg 3 Release the handle when in the desired position Moving the controller bracket inwards 1 Push A inwards until hearing a click Swing away the controller bracket 1 Push A outwards until hearing a click Note Swinging back the controller bracket will allow you to pull up close to a table Full operation of the controller remains possible 8 Use Hemiplegia armrest 1 Pull A out of the locked position and twist B into the desired position Sedeo Pro Note Ensure that B is properly secured 4 2 Getting in and out of the wheelchair transfer Forwards transfer A Warning Do not stand on the footplates Putting your full weight on the footplates may lead to wheelchair damage and to hazardous situations including the wheelchair tipping up Swinging back and or removing the standard legrest 1 Push A to the rear 2 Swing B to the side 3 Remove B Flipping up the electrical central legrest footplate 1 Flip up A Sedeo Pro Sideways transfer Folding back the armrest assembly 1 Fold A to the rear Use A Caution Remove the tray before folding back the armrest assembly 4 3 Options accessories Removing positioning the headrest 1 Loosen A by one turn 2 Slide B out of or into the receive
17. r 3 Tighten A Note Always slide the headrest until it comes to a stop in the bracket Removing the side cushion 1 Loosen A by two turns 2 Slide B up 3 When replacing the side cushion tighten A by two turns 10 Use Flip down the abduction support 1 Pull A out of the locked position and fl ip down B 2 Release A Flip up the abduction support 3 Pull A out of the locked position and fl ip up B 4 Release A in the locked position Note Ensure that B is properly secured Folding back the thoracic support 1 Press A to fold back B 4 4 Reducing the seating system in size for transportation purposes gt Removing the headrest see 4 3 Options accessories 1 3 kg Removing the seat cushion 2 5 kg Flip up the armrest Folding the backrest fully forward Removing the legrest or fold up footplates mOoOQ W A Warning The wheelchair can be reduced in size for transportation without a passenger Any components of the seating system that can be detached easily should be removed Store away such components safely so that they can not cause injury or damage or become damaged themselves Sedeo Pro Sedeo Pro Use 11 Removing the seat cushion a 1 Pull A upwards and forwards Flip up the armrest 1 Flip up the armrest A 2 Lock the armrest B
18. r manual 1 2 Symbols used in this manual 2 1 Temperature 2 2 Indications on the seating system 2 3 Moving parts General d scriptioN sea sa cadea ei Suen cuca ina EE in pi ia pai bla a 3 1 Sedeo Pro product description 4 1 Adjustments by the user attendant 4 2 Getting in and out of the wheelchair transfer 4 3 Options accessories 4 4 Reducing the seating system in size for transportation purposes 4 5 Setting up the seating system following transportation Adjustments to be carried out by a professional nenea nenea nana 5 1 Seat width 5 2 Seat depth 5 3 Backrest height 5 4 Standard and manually elevating legrest 5 5 Central legrest 5 6 Electrical central legrest 5 7 Armrest assembly 5 8 Adjusting the centre of gravity 5 9 Headrest 5 10 Fixed swing away controller bracket 5 11 Backrest with adjustable straps flexible 5 12 Velcro back curvature adjustment 5 13 Abduction support 5 14 Thoracic support 5 15 Attaching the lap strap Maintenance ese fa e ea c Deal teeth noses Dat at eden eb dict CA Da zi ua at dal 6 1 Cleaning the upholstery Troubleshooting cies a nC nm IN N er ee ee ere eee ree ee eer eer ee Technical SPECIE NON sa nic ta auda tn nituit E ei sua 8 1 CE declaration and requirements 8 2 Technical information Waranty c coral e i b at at ad at 3 OI A ano 14 14 14 15 15 17 18 20 23 24 25 26 26 27 27 28 30 30 31 32 32 32 4 Introduction 1 Introd
19. uction 1 1 This user manual This user manual will help you to use and maintain your seating system safely This user manual is a supplement to Handicare s general wheelchair user manual Where necessary this user manual refers to other manuals as shown below LI Wheelchair Refers to the general wheelchair user manual LJ Controller Refers to the user manual for the controller only applicable for power wheelchairs Read this user manual and the other user manuals referred to carefully before using the product If one of the user manuals was not included with your wheelchair please contact your dealer immediately In addition to this user manual there is also a service manual for qualified specialists Contact Handicare if you have a visual impairment Sedeo Pro 1 2 Symbols used in this manual Note Pointing out possible problems to the user A Caution Advice for the user to prevent damage to the product A Warning Warnings for the user to prevent personal in jury Not following these instructions may result in physical injury damage to the product or damage to the environment Sedeo Pro Safety 5 2 Safety A Warning Always follow the instructions given next to the warning symbols Failure to follow these instructions may result in physical injury damage to the wheelchair or damage to the environment Where possible the warning symbols have been plac
20. vents such as thinner benzine or white spirit Do not chemically clean the upholstery Do not iron or spin dry the upholstery Stretch Fabric 35 Polyester 65 Dioleen Safe Fabric Backing 100 Polyester Coating 100 PVC Care instructions Do not use cleaning materials that contain solvents Ca a x g QO 9005850 Y handicare Sedeo Pro Troubleshooting 31 7 Troubleshooting If there is a problem with your seating system contact you dealer 32 Technical specifications 8 Technical specifications 8 1 CE declaration and requirements Sedeo Pro C The product is in conformity with the provisions of the Medical Devices Directive and carries the CE mark The product also meets the following requirements and standards This has been verified by independent test organizations ISO 7176 19 Crash test A Oh ONS cigarete match flame equivalent 8 2 Technical information EN ISO 10993 5 1999 11 Biological evaluation of medical devices EN 1021 1 2 Assessment of the ignitability of upholstered furniture Ignition source smouldering EN 12183 2009 Manual wheelchairs or EN 12184 2009 Electrically powered wheelchairs ISO 7176 8 Requirements for impact static and fatigue strength ISO 7176 9 Climatic tests for electric wheelchairs and scooters ISO 7176 16 Requirements for resistance to ignition of upholstered parts Seating system
Download Pdf Manuals
Related Search