User Manual
Contents
1. GREEN lights off AMBER light blinking briefly All connected devices are fully charged All Sync mode Pressing three times after power up will also select All Sync mode BLUE and AMBER lights off GREEN light flashing slowly sync B G A on standby waiting for devices and a host PC or laptop to be connected l A BLUE and AMBER lights off GREEN light solid syncing one or B more devices BLUE and AMBER lights off GREEN light blinking briefly All connected devices have synchronised for the preset period B G A Default is set to one hour after which the UnoCart Charge and Sync trolley will return each device to charge status to maintain optimum readiness From the All Sync mode pressing the black button again returns the module to the default Sync then Charge mode Copyright LapSafe Products The UnoCart Range User Manual 7 UnoCart options Network connectivity If your trolley features network connectivity you can plug the trolley into your network by connecting a standard network cable into the auxiliary point on the back of the trolley Data transfer DTM If your purchase includes DTM your trolley will be network ready these are the red network cables within your charging bays you can update all of your laptops simultaneously inside the trolley using Wake ON LAN software Make sure that the trolley is connected to the network and switched on Plug each ind2. will not be valid unless you do this Read the section on Health amp Safety Section 11 Figure 1 Figure 2 Serial plate Key number Copyright LapSafe Products The UnoCart Range User Manual 3 Moving your trolley Your UnoCart trolley should always be moved with care Before moving the trolley the following checks actions should be carried out irrespective of the distance travelled Check that the power has been turned off at the wall socket Carefully disconnect the mains power lead from the back of the trolley and from the wall socket placing the power lead in the cable tidy located on the rear door of the trolley Check that any network cable Cat5 has been disconnected from the back of the trolley Ensure that all of the trolley doors are securely closed and locked and that all keys have been removed Disengage wheel brakes using the foot operated pedals before moving the trolley Figure 3 Special care should be taken on inclines At the new location e Ensure that all wheel brakes are applied using foot operated pedals e Never position the trolley in front of any fire exit ot fire escape routes e Never position the trolley in the view of any windows for security Figure 3 Wheel brake Copyright LapSafe Products The UnoCart Range User Manual 4 Getting started There are ventilation holes through the base and on all four sides of the cabinet and care must be taken tha
3. NT testing house and accordingly have been clearly CE marked Full CE compliance which includes the requirements of LVD and EMC directives is a STANDARD FEATURE of LapSafe Products as are many more built in safety features CE Marking can be found on the product serial number plate usually at the lower rear of the cabinet CE Declaration of Conformity Certificate is issued with each product in the User Guide Pack You may obtain further copies of the certificate specific to your product and serial number or any further information and advice upon request to our Customer support call direct 01787 226147 or FREEPHONE the switchboard on 0800 130 3456 or email support lapsafe com Rest assured that your LapSafe Product has been designed and built with Safety as the highest priority since we first introduced the concept of the mobile laptop trolley into the UK market in the last century This is indeed why we are called Lap SAFE Residual Voltage The HSE has raised a concern having identified at least one particular manufacturer s trolleys with this characteristic that many manufacturers trolleys if indeed not the vast majority may have a momentary residual voltage on the pins of the mains plug and that this could if you touched the pins within a second or two of unplugging result in an electric shock LapSafe Products have been designed from the outset with safety internal circuitry as standard so as NOT t
4. O Lap PRODUCTS The UnoCart Range User Manual Date September 2015 Version 1 LPL15_V1_04 The UnoCart Range User Manual Contents Section Title Section No Introduction Important actions Moving your trolley Getting started Charge only set up Charge and sync set up UnoCart options Warranty Care and maintainance Helpful links Health amp Safety Safety declaration CE conformity Copyright LapSafe Products The UnoCart Range User Manual 1 Introduction Congratulations and thank you for purchasing a storage and charging trolley from the LapSafe UnoCart range Your trolley comes with a life time parts and labour warranty which you will need to activate immediately Section 8 This manual has been designed to assist and guide you with the set up and correct use of your trolley 2 Important actions Upon delivery of your new UnoCart trolley you must Take a note and store in a safe place your trolley s serial number which can be found located on the back of the trolley The silver plate will hold your serial number that begins with UNO Figure 1 You will need to quote this number for all enquiries relating to your trolley Take a note of your key number located on the key itself and store this in a safe and secure place You will need this if you wish to order additional keys Figure 2 Visit lapsafe com activate to activate your Lifetime warranty Your warranty
5. do so 10 Helpful links Replacement Keys www lapsafe com keys Activate Warranty www lapsafe com activate Support Enquiries www lapsafe com support enquiry support lapsafe com 0800 130 3456 Copyright LapSafe Products The UnoCart Range User Manual 11 Health amp Safety All products manufactured by LapSafe Products have been thoroughly tested and certified by an authorised and INDEPENDENT testing house before sale Full CE compliance which includes the requirements of LVD and EMC directives is a STANDARD FEATURE of any solution manufactured by LapSafe Products as are many more built in safety features CE Marking can be found on the product serial number plate usually at the lower rear of the cabinet CE Declaration of Conformity Certificate is issued with each product in the User Guide Pack Please be advised of the following safety advice At no time are the rear service door of the trolley to be opened by anyone other than an authorised person At no time should anyone attempt to physically lift the trolley as this could cause injury to the persons concerned and even damage to the trolley which will invaldate the manufacturer s warranty Should the movement of the trolley require this type of action you are advised to seek advice from the authorised person In such circumstances the matter should be referred to LapSafe Products for consultation and advice Always apply the wheel brakes when th
6. e trolley is either parked or not in use Disconnect the mains supply and stow the mains cable into either the cable management provided or on top of the unit before moving Always ensure that the main power lead does not present a trip hazard when connected to the mains Always ensure that the main power lead is fully extended when connected to the mains The trolley should only be moved on horizontal surfaces Always ensure that the trolley NEVER impedes full and free pedestrian access to all fire routes fire exits and normal access routes Only place the approved laptops in the trolley for recharging NEVER allow unauthorised access to the service doors at the rear of the unit The above is not an exhaustive list Contact LapSafe Products should you have any concerns Copyright LapSafe Products The UnoCart Range User Manual LapSafe PRODUCTS make the educated choice Safety Declaration Recent guidance from the Health and Safety Executive regarding Laptop computer charging trolleys safety alert requires interpretation from each manufacturer as regards to their product compliance The HSE statement can be found at www hse gov uk services education safety121009 htm CE Testing Conformity and Declaration of LapSafe Products At LapSafe Products we are proud to confirm that ALL of our electrical products going back over ten years have been thoroughly tested and certified by an authorised and INDEPENDE
7. gure 4 Rear door Copyright LapSafe Products The UnoCart Range User Manual 5 Charge only set up If you purchased a trolley that uses USB for charging and syncing then this section is not relevant to you procceed to Section 6 Please ensure the cabinet is unplugged when you are loading AC adaptors in the UnoCart 1 Remove the rear door as described in Section 4 You will find power strips for your AC adaptors in the back plug your AC adaptor into a plug socket and load the AC adaptor block into the special area on the back of the relevant shelf and cable tie in place Figure 5 Pass the device connector through the shelf and use the cable management clips to hold the cable in place Figure 6 Repeat these steps until your trolley is fully loaded with devices Figure 5 Figure 6 AC adaptor block Cable management clips Copyright LapSafe Products The UnoCart Range User Manual 6 Charge and sync set up Dealing with your host laptop Macbook The top shelf of your UnoCart is designed to accept a single MacBook or laptop PC and there is a charging socket within this space to plug in the AC adapter that is supplied with the computer The laptop computer will normally be loaded onto the shelf with the charging socket to the front of the cabinet either on the visible edge the rear of the lap top or on the left or the right side Figure 7 Position the AC adapter on the shelf where it will n
8. ividual red DTM cable inside the trolley into the network ports of each laptop and ensure that the trolley is switched on The laptops are now ready to receive updates Docking station If you have purchased a docking station with your trolley then please refer to the docking station user guide to fit and dock correctly Timer If your laptop trolley has been fitted to include a timer please refer to the timer user manual provided at the time of purchase 8 Warranty All of our products come with a Lifetime Parts amp Labour Warranty To activate your FREE Lifetime Parts and Labour Warranty please go on line and register at lapsafe com activate Copyright LapSafe Products The UnoCart Range User Manual 9 Care and maintainance Lock your trolley when not in use Keep your keys in a Safe place and not in the same room as the trolley Read the Health and Safety guidelines in the user guide and share this information with all users Activate your warranty at lapsafe com activate Unplug charging leads before taking laptops out of the trolley Don ts Do not move the trolley without disconnecting the mains power Do not move the trolley with the mains lead trailing use the cable tidy Do not leave keys in the doors locks when moving the trolley Do not remove doors Do not leave trolleys in the view of a window for security Do not try to modify the trolley in anyway without contacting LapSafe first to check that it is safe to
9. o retain or present any significant residual voltage in this way In fact it is virtually impossible to get any such significant electric shock from our cabinets in normal use However regardless of how safe any particular trolley may be we endorse the recommendations for employing common sense practise as a generic rule for any mobile electrical appliance such as switching off the mains socket before unplugging the power leads and NOT moving the trolleys without disconnecting and unplugging the power leads at both ends Two of the wheels are fitted with locks as standard and should be kept locked as a reminder when power is connected and as a general safety rule as per the user instructions supplied with each cabinet For further information call Lapsafe products on 0800 130 3456 or visit our website at lapsafe com LapSafe p PRODUCTS Mentor range from January 2010 Warranty Parts amp Labour Cover for the life of your Cabinet 0800 130 3456 www lapsafe com LAPSF076_23052011V2 Copyright LapSafe Products The UnoCart Range User Manual LapSafe EU Declaration of CE Conformity PRODUCTS EU Declaration of CE Conformity to Council Directive 89 336 EEC Amendment 2004 108 EC amp to Council Directive 73 23 EEC Amendment 2006 95 EC Equipment Description Laptop Battery Charging Unit Device Name LapSafe UnoCart Range Manufacture Address LapSafe Products Limited Unit 3 Wakes Hall Business Cent
10. ot hinder the loading of the laptop and where the charging lead can be easily routed to the charging socket There are a number of holes in the top shelf where the cable ties or cable management clips supplied with the cabinet can be used to hold the wires in a convenient position should you wish Alternatively the laptop computer can be powered from the socket on the top of the cabinet In this location there is also a USB connection to the synchronisation capability within your UnoCart There is also a security cable on the top of the cabinet to secure a MacBook or laptop computer while it is in this location Figure 7 Figure 6 Host laptop Macbook shelf Cable management clips Copyright LapSafe Products The UnoCart Range User Manual Loading your devices The charging and synchronisation unit of your UnoCart is accessible through the rear door of the cabinet A charging synchronisation connection must be made between your UnoCart and each supported iPad It is important that a good quality lead is used to make the connection between your iPads and the charging synchronisation unit poor quality leads can create problems during the synchronisation process Plug each connecting lead into an available USB socket in the charging synchronisation unit and route them through to the front of the appropriate shelf where it will not be in the way of loading the iPad but it will be available to plug in once the device is in
11. position There are a number of holes at the rear and sides of each shelf where the cable ties or cable management clips supplied with the cabinet can be used to retain the charging synchronisation lead in position should you wish Button modes The lights on the charge and sync unit explains which mode it is in sync and charge charge and sync or auto cycles AMBER light off GREEN light flashing slowly and BLUE light on B G A synchronising will commence once the devices are connected TE to host laptop or MacBook Charging will commence once the o synchronising has finished or timed out Note If no host device is connected when the unitisswitchedon RB G A charging will commence GREEN light off AMBER light comes on to indicate charge and will blink to confirm full charge O O All Off mode Pressing once after power up will select All Off mode B G A AMBER and GREEN lights off BLUE light blinking briefly Power on with no activity Aiia From the All Off mode pressing the black button again will select All Charge mode Copyright LapSafe Products The UnoCart Range User Manual All Charge mode Pressing twice after power up will also select All Charge mode BLUE and GREEN lights off AMBER light flashing slowly waiting for iPads tablets to be connected charging on standby BLUE and GREEN lights off AMBER light solid One or more devices are charging BLUE and
12. re Wakes Colne Colchester Essex CO6 2DY European Standards Emission BS EN 55 022 class B Immunity BS EN 55 024 Electrical Safety BS EN 60335 1 Declaration We hereby declare that the stated equipment complies with the required Emission Immunity and Electrical Safety standards stated above Issue Date 4 December 2012 Authorised by LapSafe Products John Hutton Position Director LAPSF201_04122012V1 Copyright LapSafe Products The UnoCart Range User Manual LapSafe PRODUCTS Powering Smart Technologies Copyright LapSafe Products
13. t none of these holes are obstructed Select a location where there is sufficient airspace for the cabinet to ventilate Your UnoCart should not be left within a cupboard or small closed space when charging because the recirculation of its own warm air could lead to unnecessarily high temperatures for periods of time With your UnoCart in its working position the mains lead can be fitted into the mains socket at the rear of the right side of the cabinet and taken to an available wall socket to be plugged in and switched on The front doors of your UnoCart are unlocked using the key with the blue key cover and the rear door has a separate key with a black key cover The front doors are for everyday working access to the cabinet The key can be removed once the door is open this will prevent the door from closing fully whilst it is unlocked Once the key has been removed the door can be swung right back against the side of the cabinet where a magnet will hold it in position The rear door should not be considered as day to day access to the cabinet once opened you will see a safety earth lead with a push on fixing on the rear door which must be disconnected before the door can be fully removed Once the connector has been pulled apart the door can be lifted out of the slots along the bottom edge and placed to one side For your safety please ensure that you reconnect the earth lead when replacing the rear door Figure 4 Fi
Download Pdf Manuals
Related Search