Home

Manual

1. micromodul LV2 Page 26 User manual Version 02 Mathias Fuch Software Entwicklung Op n Idenkamp 13a 22397 Hamburg Germany info faderfox de www faderfox de micromodul LV2 Page 27 User manual
2. both directions x and y which is essential for some programs The choice takes place via the Stick ctrl key upper LED Pan on no inversion left and below zero values above and right max values middle LED FX1 on vertical inversion Y below maximum values above zero values lower LED FX2 on horizontal inversion X left maximum value right zero value The usage in Live does not need an inversion Pan LED on Play indication The indication by the Play LED can be done in 3 different modi via the upper Pot ctrl keys upper LED Send on internal control after play command the Play LED is on after stop command it is switched off middle LED EQ on external control after arriving midi start command the Play LED is on after arriving midi stop command it is switched off micromodul LV2 Page 9 User manual lower LED Clip on external control Play LED blinks to the rhythm of the arriving midi clock signals To let the Play LED blink to the rhythm you have to activate the clock out synch out in the program from the midi out port which the LV2 midi in is connected to Faderpos indication The track LED s above the faders do not only function as an indication of the selected track but also as an indication of the divergence between the actual position of the fader and the position of the corresponding fader in Live You have to press the Main key to activate this function in the system mode Ma
3. is a pocket size custom made controller for one of the most creative music programs in recent history The LV2 is very compact and easy to transport and you do not even need the mains adaptor it works with standard and rechargeable batteries Many different control elements are integrated into this controller this combination is it s strength Track faders encoders keys and joystick are unified in a compact way in this affordable controller There are two programmable key lines with each 6 keys for the control of different Live options such as scene launch fx control mute solo track control and slot launch Parameter feedback from Live will be shown by the right assigned LED s Perfect for controlling without any value differences are the four push encoder endless potentiometer with switch You can easily reach important options like track select slot scene scroll or slot scene launch by activating the new main function Because a file with the right settings comes with the controller you can start directly with Live from Version 4 1 without any lenghty learning of controller numbers Start the era of modern sequencing You can also use the LV2 with other programs The controller is suitable for any kind of software sequencer due to its architecture Read this user s manual thoroughly Even if the design of the LV2 controller is largely intuitive and the instrument is self explanatory this manual should be able to answer
4. red 43 91 Note numbers in keymode Mute group for the second key line both key lines in keymode Mute group Channel 10 setup 1 13 setup 2 No Key 7 blue 50 8 blue 58 9 green 66 10 green 74 11 red 82 12 red 90 Note numbers in keymode Solo group for the second key line both key lines in keymode Solo group Channel 10 setup 1 13 setup 2 No Key 7 blue 51 8 blue 59 9 green 67 10 green 75 11 red 83 12 red 91 Note numbers in keymode Track ctrl for the first or second key line different keymodes per key line Track 1 12 Channel 10 setup 1 13 setup 2 Mastertrack Channel 12 setup 1 15 setup 2 sel Track 1 2 3 4 5 6 7 8 9 10 11 12 Master Key 1 7 Launch 0 8 16 24 32 40 48 56 64 72 80 88 0 2 8 Stop 1 9 17 25 33 41 49 57 65 73 81 89 1 3 9 Mute 2 10 18 26 34 42 501 58 66 74 82 90 2 4 10 Solo 3 11 19 27 35 43 51 59 67 75 83 91 3 5 11 Mon 4 12 20128 36 44 52 60 68 76 84 92 4 6 12 Rec 5 13 21 29 37 45 53 61 69 77 85 93 5 micromodul LV2 Page 21 User manual Note numbers in keymode Track ctrl for the second key line both key lines in keymode Track strl Track 1 12 Channel 10 setup 1 13
5. setup 2 Mastertrack Channel 12 setup 1 15 setup 2 Track in2 row 2 3 4a 5 6 718 9 10 11 12 Master Key 7 Launch 8 16 24 32 40 48 56 64 72 80 88 120 8 Stop 9 17 25 33 41 49 57 65 73 81 89 121 9 Mute 10 18 26 34 42 50 58 66 74 82 90 122 10 Solo 11 19 27 35 43 51 59 67 75 83 91 123 11 Mon 12 20 28 36 44 52 60 68 76 84 92 124 12 Rec 13 21 29 37 45 53 61 69 77 85 93 125 Track 1 is not available for the second line if both lines are programmed to track ctrl Note numbers in keymode Slot launch for the first or second key line different keymodes per key line Track 1 12 Channel 11 setup 1 14 setup 2 Mastertrack Channel 12 setup 1 15 setup 2 sel Track 1 2 3 4 5 6 7 8 9 10 11 12 Master Key 1 7 blue O 8 16 24 32 40 48 56 64 72 80 88 8 2 8 blue 1 9 17 25 33 41 49 57 65 73 81 89 9 3 9 green 2 10 18 26 34 42 50 58 66 74 82 90 10 4 10 green 3 11 19 27 35 43 51 59 67 75 83 91 11 5 11 red 4 12 20 28 36 44 52 60 68 76 84 92 12 6 12 red 5 13 21 29 37 45 53 61 69 77 85 93 13 Note numbers in keymode Slot launch for
6. D s don t show the right started scenes in the keymode scene launch Since Live does not yet Live Version 6 0 give a feedback about running scenes the LV2 controller has to generate its own indication This has the result that after a scene change in Live no update of the indication can occur 6 The LED s indicate not all of the solo tracks in the keymode solo Since Live does not yet give a feedback for the solo function the LV2 controller has to generate its own indication In doing so only the last track switched to solo by the LV2 is indicated According to that the solo exclusiv function in Live should be switched on See chapter parameter feedback 7 The LED indication does not work or is incomplete in the keymode track ctrl Since Live does not yet give a feedback for the track control functions stop solo mon and rec a perfect indication is not possible See chapter parameter feedback 8 After assigning the encoder the pots in Live can not be controlled properly anymore They only change between minimum and maximum The encoder in the groups Clip FX3 FX4 and FX5 send relative data which has to be analysed by Live as relative data So be aware that the lower window border has to show Relative 2 s Comp when assigning the encoder This happens by moving the encoder at least 2 steps to the left against clockwise direction micromodul LV2 Page 24 User manual micromodul LV2 Page 25 User manual
7. DC min 50 mA Midi merge function Very compact design in a black plastic casing desktop format 180x105x70mm 450 g Silver aluminium front plate with anodised coating abrasion resistant and inscriptions 51 LED s in different colors to display various information low light shining of all LED s for better orientation in dark club atmosphere High quality faders encoders and joystick from ALPS micromodul LV2 Page 4 User manual Expandable system by other micromodul controllers easy chaining by midi connections Compatible to the 1st micromodul line same cc note numbers like LV1 LX1 System requirements PC or Mac with a Midi Interface Midi input Midi output is necessary if you want to use the functionality of parameter feedback Ableton Live or software which allows self assignments of midi controls for continuous parameters or key commands for switching parameters Optimal with Ableton Live as of version 4 1 with the enclosed setup file Quick Access After you did all of the relevant midi connections and settings in Live see further down and loaded one of our setups preferably micromodul LV2 VO1 A6M6 Live50 als the fun may begin Use your mouse to drag and drop a few clips from the browser to any slots in the different first 6 audio tracks It is best to choose several sequent clips by holding shift or ctrl key so you have a choice of clips in each track You can launch these as usual with you
8. G1 will appear The appropriate LED will show the status of the effect from now on LED shines Effect on Finally we want to introduce the joystick Make sure that it is on FX1 to change with the Stick ctrl key Now click onto the digit display left to frequency in the grain delay window Move the stick to the middle of the right border and from there on slightly up and down always attached to the right border see left draft where the approriate controller number 15 36 appears in the window After that click onto the small digit display next to pitch and press the Shift key on the LV2 Move the stick to the middle of the border above If you let go of Shift and move the stick slightly to the left and right always attached to the upper border see right draft the appropriate controller number 15 38 will also appear in this window Now you can control the effect and you can exit the midi mode in Live again gt 5 Allocation for the y axis Allocation for the x axis Now just try the assignments The joystick in the right upper corner and the feedback guite high rocks nicely If you want to change the clip in the track keep on pushing the Shift key and change and start the clip with the left encoder After letting go of the Shift key the encoder controls the effects again To start or stop Live globally you can also push both the Pot ctrl keys in combination with the Main key micromodul LV2 Page 6 User manual Tips Plea
9. a question or two If you should have any sort of other problem with your micromodul just contact us via email micromodul LV2 Page 3 User manual Product description Special controller for sequencer software optimised for Ableton Live Setup files for Ableton Live as of version 4 1 are shipped with the controller Independent of operating system and computer type PC or Mac due to the midi interface 6 track faders switchable between 2 fader groups 1 6 7 12 4 push encoders to control track dependent and track independent parameters total of 144 parameters Main function for fast encoder access to important functions like trackselect slot scene scroll mastervolume clip scene launch etc Joystick to control track dependent and track independent parameters total of 30 parameters 2 button rows with each 6 buttons and LED s programmable independent in 6 keymodes Scene launch FX control Mute Solo Track ctrl Slot launch Parameter feedback of Live button statuses is indicated by LED s Mute FX Fadermute for all controls by holding down the instrument s Shift button Faderposition view by LED s by holding down the instrument s Shift button Play LED to show the beat speed Independent power supply by standard or rechargeable batteries 3 x AA cell lifetime about 30 to 60 hours Powersave mode after 10 minutes of the last movement running light LED battery control Socket for an external power adaptor 4 5 6V
10. and sends for every track at the same time via the 8 encoder The track selection by the encoder is transmitted between the controllers so that after a switch of tracks in the right LV2 LC2 both controllers are set to the same track Additional keys with the micromodul LX2 Our LX2 was designed as an addition A controller with 36 control buttons all of which have the same colour scheme as the LV2 You can use this instrument to carry out all of the switching functions of the LV2 but you will not have to switch the tracks first anymore All track control functions are accessible directly for 6 tracks but you can have one function for example Mute or Launch accessible for all 12 tracks Another strength of the LX2 is the possibility to start 36 slots scenes even up to 108 are possible by using the keyset switch Track control functions slot start functions track select and even more can also be mixed among the keys buttons configure it according to your personal needs There is an endless number of combinations possible An 1 octav mini keyboard with octav shift keys makes it possible to quickly trigger a midi instrument in Live without being forced to use the master keyboard Of course the real fun starts when you combine two LV2 s LC2 s and two LX2 s 12 tracks all with corresponding switching functions and direct control and this group of 4 instruments looks great as well Additional encoders with the micromodul LD2 T
11. ck movements are not registered in Live By using this feature also called fadermute you can avoid large parameter changes if the controller settings in the programm and computer are different This function is supported by the faderpos indication when activated in the system mode Fader The most important are the 6 faders eventually These are used to adjust the volume for tracks 1 6 and 7 12 To switch between these two groups use the Group key The corresponding LED next to this key show you which group is selected First of all the LED s above the faders show you the selected track green LED track 1 6 and master track red LED track 7 12 But the LED can also be used for the so called faderpos indication has to be activated in the system mode You can switch between track and faderpos indication by pressing the Shift micromodul LV2 Page 12 User manual key Whilst pressing the shift key no signal is send when moving the faders but instead the LED show the value difference between the controller and the programm Live Thereby the red LED indicate a lower position of the fader and the green ones indicate a position that is too high The arrows next to the LED show you in which direction the fader have to be moved If both LED s above the fader are switched off the fader position is almost equivalent to the programm Live This indication is useful when the fader position should be corrected after a switch between the fa
12. d in the Live50 sets and controls Transpose Gain Loop start and Loop end for the selected clip to select the clip double click with the mouse The last 3 target groups FX3 FX4 FX5 control each 4 independent parameters which are not yet assigned This is very good for effect parameter which you want to be able to use easily Use the Main group in order to control the most important parameter Slot scene scroll Track select Cue volume and Master volume A short switch to the Main group can be achieved by pressing the Shift key The different functions can be controlled with the encoder dependent to the selected target group Send by pressing it the send level is put to zero left stop EQ by pressing it the gain level is put to zero middle Clip control of Free Clip startpoint Loop startpoint Loop endpoint FX3 FX4 FX5 by pressing a free assignable notes command is send FX enable or other Main control of Clip scene launch Clip scene stop Free Select master track Joystick In principle the joystick has the same multi functionality as the encoders You can also select 3 different targets for the joystick whereas the first is track dependent and the other two are track independent The joystick allows 2 parameters to be changed at the same time one in horizontal direction and one in vertical direction We assigned the panorama control to the track dependent target upper LED The other two targets hav
13. der groups for example in order to avoid bigger and audible value differences Parameter feedback from Live is required for this indication function also see chapter Parameter feedback Keyboard The colored controlkeys at the lower border are grouped in two lines with each 6 keys Each of these lines is separately programmable This programming is easily made by simply holding the grey Keymode button and choosing the function via one of the 6 according keys The chosen function will be indicated by two LED lines in the Keymode section The green line above shows the function of the upper key line and the lower red LED line shows the function of the lower key line Following key modes are available Scene launch start of a scene can be assigned in Live yourself FX ctrl control of different free choosable functions like fx control can be assigned in Live yourself Mute group control of the track mute function for 6 tracks from the chosen group Solo group control of the track solo function for 6 tracks from the chosen group Track ctrl control of the track function in the selected tracks Launch Stop Mute Solo Mon Rec Slot launch start of slots in the selected track can be assigned in Live yourself The LED s above the fader show you which track is selected Always coordinate when choosing a track by looking at the LED and not only via the monitor Both do not have to be the same The right LED with th
14. e label M shows the chose of master track If both key lines are programmed to the same function Scene launch FX ctrl Mute group Solo group or Slot launch 12 and not just 6 targets are available If both lines are programmed to Track ctrl the selected track first line and the following track second line can be controlled An exemption exists if the master track is selected In this case 6 further switching functions are available for the lower key line The programmable keymodes can be saved as start settings also see chapter start settings You can use the 12 keys as an alternative for track selection via the encoder If you hold the shift key and press one of these keys additionally you select the corresponding track of the current group The track is indicated by the key LED s The master track can be only selected with the encoder to select the master track hold the shift key and the button of the right encoder micromodul LV2 Page 13 User manual Encoder The 4 encoders A B C D above the faders are multifunctional Use the Pot ctrl and Main keys in the upper right corner and switch these 4 encoders to 7 different target groups which are displayed with LED s The first 2 target groups Send EQ are track dependent groups That means when these LED s are on you control the 4 send controls or the 4 gain pots in the equalizer for the selected track with these 4 encoders The Clip group is already assigne
15. e not been assigned but they are very useful for Live effects that have X Y parameters The learning of the joystick is described in chapter quick access as well Parameter Feedback The LV2 does not just send Midi Signals but also analyzes and shows signals that arrive This way it is possible to include the parameter feedback from Live in the control Status messages from the switching functions are indicated via LED s and even the actual pot or fader positions reach the LV2 and are analyzed Due to the faderpos indication described further above those messages are used for indication and even the encoder use this informations partly in order not to differ in value when moving But especially the new indication in form of the 12 LED s in the two lower key lines profit from this informations All of the mute feedback fx status and slot status is shown so that an exact copy of the liveface is possible for the LV2 All other switching functions are not yet supported from Live regarding the feedback This will change in form of a special driver from Ableton for micromodul very soon The indication of the function Scene launch is first generated in the LV2 itself and do not have to be identical to the Live face but it displays always the scene that was started last with micromodul LV2 Page 14 User manual the controller The indication of the Solo and Rec functions are also generated in the LV2 and are programmed that way that alwa
16. he LD2 controller is a further addition to the live line A controller with 16 push encoder which reflect the encoder functions of the LV2 LC2 You can control all encoder functions of the LV2 LC2 gaining the advantage not to switch with the Pot ctrl all the time All send and eq control functions for 4 tracks are immediate accessible but you can also obtain all important functions of one track with the 1 track control Another strength of the LD2 is the micromodul LV2 Page 17 User manual option that you can see the encoder values on LED bar Of course there are further 3 additional groups of each 16 encoder functions for free disposal The optimum setup is a combination of LD2 LV2 LC2 LX2 12 Tracks with all corresponding control functions directly accessable plus all kinds of rotary controls There is hardly anything better than that Using the micromodul DJ2 to create an expanded DJ Set You can create an expanded DJ set for Ableton Live by combining a LV2 with the DJ2 With the LV2 multiple tracks are mixed together to 2 send paths These 2 premixes are then processed by the DJ2 which does the final mix and applies the effects Even the LX2 with its numbers of keys can help to control single tracks in the premix or to start the clips in the slots of these tracks separately Of course we supply you with two files for the configuration of the necessary presets micromodul LV2 DJ2 V02 A6 Live41 als with 6 tracks and send control
17. he computer The data is then merged in the LV2 Of course many users will now wonder why this controller does not have an USB interface The micromodul system is a system of multiple controllers that is able to be cascaded via midi This is not as easy with USB especially because the units can control each other due to the cascading In addition many computers with sound cards or USB Firewire audio interfaces have a midi interface This means you would not have to use one or more of your USB ports to use the whole micromodul system If your computer does not have a midi interface or your sound card does not have one either the market offers a number of small and inexpensive solutions in the form of an USB midi interface that has both a midi in and a midi out slot In combination with the micromodul system this is absolutely sufficient Following recommendable hardware are hardly bigger than a cable M Audio MidiSport Uno Edirol UM 1EX ESI RoMI O Which software can be controlled The LV2 was designed primarily for the usage with Live from Ableton as of version 4 1 You can find a file with the matching controller settings on the disc enclosed Live versions before 4 1 can not be completely controlled no clip selections and control missing feedback etc but they can still be allocated with the LV2 The LV2 can also be used with other sequencer programs or software instruments The large parameter selection actually makes this contr
18. he guarantee are damages that are the result of incorrect or inappropriate handling excessive force mechanical or chemical influences incorrectly connecting the instrument with other instruments incorrect or inappropriate use The warranty is void if the instrument is opened or changed In addition there is no warranty for individual parts and components in particular semiconductors and disposables consumables The seller is not liable for consequential damages which are not the result of criminal intent or negligence on his part The following conditions must be met in order to claim the warranty services Instrument is either in its original packaging or similar packaging Copy of the invoice with the serial number clearly visible Meaningful error report or description of the error is attached The buyer assumes all costs and dangers of return shipments to the manufacturer Since the user s manual which is included with each instrument also affects the warranty conditions especially regarding safety issues it is absolutely essential that you read through and follow all instructions Safety precautions and servicing Instrument s intended use is based on the functions and procedures contained in this manual Read all instructions for use as well as all enclosed literature before using the instrument Use only in closed rooms not for outdoor use Never use in a moist or humid environment laundry rooms swimming po
19. hooting 1 Everything is connected correctly and adjusted in Live but no fader key is controllable in the provided setup When moving a fader on the LV2 only a small lamp is on in the right above corner of the Live Window next to the D Probably the wrong setup in the LV2 is chosen For the provided files you have to choose setup 2 See chapter settings in the system mode setup choice 2 The faders pots in Live move on their own when controlling them via LV2 and or the keys don t work can t be switched on The feedback killer function has to be activated in the first controller of the midi chain See chapter settings in the system mode feedback killer Also note the drafts in chapter parameter feedback 3 I connected several micromodul controller but not all of them work The feedback killer function has to be activated only for the first instrument in the midi chain See chapter settings in the system mode feedback killer Also note the drafts in chapter parameter feedback 4 Keys and fader in Live can be controlled from the LV2 but the LED s do not shine for mute and FX or the encoder regulations are not without any value differences The LV2 controller does not get any parameter feedback from Live Plausible reasons could be a missing midi cable at the midi in slot but also a missing activation of the remote control from the out port in Live See chapter preparations in Live 5 The LE
20. i channel 13 15 If you want to use the Live file provided setup 2 has to be activated Each setup has its own system settings joystick mode play indication faderpos indication and feedback killer which are shown immediately when switching the setups Because of these two setups it is possible to control 2 programs with all controller functions whereby you have to switch the setups always in the system mode To control Live and Cubase or Live and Reason at the same time without splitting up the fader will be no problem Especially when using several LV2 at one midi interface it makes sense to control different programs at the same time via splitted setups Start settings By starting the system mode all start settings are inherited This is very useful in order to find all control elements set for the most used targets right at the start without any annoying switching micromodul LV2 Page 10 User manual The chosen targets for the encoder Pot ctrl and joystick Stick ctrl the Group assortment as well as both of the Keymodes for both of the lower key sets belong to the start settings Please be aware that everytime you start the system mode these settings will be inherited as start settings The start settings are stored seperately for each of the two possible setups Preparations in Live First of all you have to copy our ALS files from the CD in the micromodul LV2 directory to your computer We have prepared differe
21. in LED on Faderpos indication activated Main LED off Faderpos indication deactivated The description of this functions follow further down in chapter Working with Live Feedback killer The Feedback killer is an essential function in connection with the ability of the LV2 to absorb feedback from Live Since the controller is connected bidirectional with the midi in and out slot of the computer and consequently with Live the data sent from Live will be sent through the controller and back to Live midi merge function In doing so a back coupling effect feedback originates which brings Live occasionally into the condition of moving parameters Beyond that several key combinations are not possible anymore To avoid this but at the same time enable the usage of several controller the feedback killer was implemented When and for what controllers in a chain this functions has to be activated is explained in more detail further down in chapter Parameter feedback arrangement The activate this function in the system mode you have to press the Group key LED 1 6 on feedback killer deactivated LED 7 12 on feedback killer activated Setup To choose between the two possible setups you have to press the two blue keys with number 1 and 2 in the system mode upper left blue key 1 setup 1 all CC note Data will be sent to midi channel 10 12 upper right blue key 2 setup 2 all CC Note data will be sent to mid
22. k Ch 10 13 A EQ abs 40 51 Ch 11 14 56 Mastertrack Ch 1 1 14 B EQ abs 60 71 Ch 11 14 76 Mastertrack Ch 1 1 14 C EQ abs 80 91 Ch 11 14 96 Mastertrack Ch 11 14 D EQ abs 100 111 Ch 11 14 116 Mastertrack Ch 1 1 14 A B C D Clip rel 20 21 22 23 Ch 12 15 A B C D FX3 rel 24 25 26 27 Ch 12 15 A B C D FX4 rel 28 29 30 31 Ch 12 15 A B C D FX5 rel 32 33 34 35 Ch 12 15 A B C D Clip Push 104 105 106 107 Ch 12 15 A B C D FX3 Push 108 109 110 111 Ch 12 15 A B C D FX4 Push 112 113 114 115 Ch 12 15 A B C D FX5 Push 116 117 118 119 Ch 12 15 micromodul LV2 Page 19 User manual Fader Control Change Number Note Number Fader 1 6 abs 0 5 Track 1 6 Ch 12 15 6 11 Track 7 12 Ch 12 15 Push stands for the encoder key Ch Channel Setup channel setup 2 abs stands for absolute cc data rel stands for relative cc data 2 s complement Several codes for main send and EQ are in the right order for track 1 to 12 and master track Note numbers in keymode Scene launch for the first or second key line different keymodes per key line Channel 12 setup 1 15 setup 2 No Key 1 7 blue 8 2 8 blue 9 3 9 green 10 4 10 green 11 5 11 red 12 6 12 red 13 Note numbers in keymode FX c
23. m of several different micromodul controller an instrument with feedback killer function for example LV2 LX2 LC2 LD2 has to be used as the first right instrument you can t use a DJ2 or DX2 since they don t have this function If these two rules are disregarded either not every controller is available for controlling or a midi feedback happens This means that the fader begin to flicker or the switching functions are incorrect If the parameter feedback is not used and another external midi instrument for example a keyboard is connected to the first right micromodul instead the feedback killer function has to be switched off in every controller otherwise no passing through of the midi data from the external instrument takes place The following drafts show 2 possible configurations micromodul LV2 Page 15 User manual Computer Midi interface Midi In Midi Out Midi In feedback killer deactivated micromodul Midi Out Midi In feedback killer deactivated micromodul Midi Out Midi Out Midi In feedback killer deactivated micromodul other midi device e g keyboard Midi Out Midi In feedback killer deactivated micromodul Computer Midi interface Midi In Midi Out Midi In feedback killer deactivated micromodul Midi Out Midi Out Midi In feedback killer deactivated micromodul Midi Out Midi Out Midi In feedback killer deactivated micromodul Midi Ou
24. micromodul LV2 pon IE O FX2 Stick ct Z Xx Clip scene launch Clip scene stop Clip select Select master track OOOO Slot scene scroll Track select Master volume A OO OO OO YO DA VO Oa VO Au 1 7 2 8 3 9 4 10 5 11 6 12 selected groupy selected track Scene FX Mute Solo Track Slot launch ctr group group ctr launch micromodul LV2 www faderfox de User manual Content Provision of guarantee and product liability Wo WWW amp 2 Safety preca tions and a na 2 Inttoducton ya ze tee a fee ee ra 3 Product ESCH MOM a ra 4 System TEGUNTEENIS ciare ABS BAN iaia 5 QUICK Access ital ein SERA NAS ORT 5 NN 7 A CT 7 Connecting to a COMPUTE mi diles 8 Which software can De controlled sea 222 oe I a 8 Settings im the EMM A tds 9 PLEASE se ele RSNI EA ESS SEERE 11 Working With Live ea ad la Nan 12 Parameter Feedback nun ehe ee un ei 14 Expanded else ernennen TRAI 17 Controller numbers dora dni dla ici 19 Troubleshooting ii 24 micromodul LV2 Page 1 User manual Provision of guarantee and product liability The seller warrants for faultless material and proper manufacture for a period of 24 months from the date of sale to the end user Excluded from the stated guarantee are defects on parts as the result of normal wear and tear These parts are mostly faders sliding guides potentiometers encoders buttons switches and joysticks Also excluded from t
25. n also create some sets on you own for earlier versions see next chapter After the midi connection between the LV2 and the computer has been established start Live Next select the midi port to which the LV2 is connected to You have to switch the appropriate In and Out Ports to remote control You can find them in the Live preferences under Midi sync Whilst doing that you can also switch the out port to sync signal so that the Play LED can show the beat Open one of the Live sets listed above All of the important control assignments to the individual control elements are then established Play around a bit with the controls and knobs on the controller and check if you see the corresponding reaction on your monitor If nothing happens search for possible reasons in chapter trouble shooting micromodul LV2 Page 11 User manual Controlling your Live Sets There is of course also the possibility of making adjustments between the software and the controller via the learn function of Live You will need this function in order to control additional functions or make changes If you would like to control your existing Live set using the LV2 you either need to input all adjustments with the learn function in Live or copy all clips in one of our sets We reckon that in the foreseeable future Ableton will bring out a special driver for micromodul With this all assignments according to our sets will be available without loadi
26. ng a special set Assigning the controller in Live First activate the learn mode in Live by pressing the midi switch on the upper right of your monitor The actual learning process consists of selecting the control element or slot scenes and then moving the desired fader or activating the desired keys or keycombinations with the Shift key If your assignment was successful Live displays the midi channel and controller or note number plus the control mode Absolute or Relative 2 s Comp in the bottom segment of your monitor Note some tips for the assignment allocate all elements from one track before switching to another track track select just via the keys in connection with the shift key joystick assignment for the x or y axis best via a slight movement along the upper or right border also see chapter quick access move encoder for the fields Clip FX3 FX4 FX5 several steps to the left against the clockwise direction and be cautions that Live recognises that controller as Relative 2 s Comp encoder for the fields Main Send and EQ send absolute data The next chapter will explain how the various functions of the faders and keys can be accessed As soon as everything has been assigned exit the learn mode by pressing the midi switch in the program Working with Live The layout of LV2 is optimised to work with Live One general function when the Shift key is pressed is that all fader and joysti
27. nt Live Sets micromodul LV2 V01 A6M6 Live41 als with 6 audio tracks and 6 midi tracks micromodul LV2 V01 A12 Live41 als with 12 audio tracks micromodul LV2 V01 A8S4 Live41 als with 8 audio tracks and 4 sends micromodul LV2 V01 A6M2S4 Live41 als with 6 audio tracks 2 midi tracks and 4 sends micromodul LV2 DJ2 V02 A6 Live41 als with 6 audio tracks and send control via DJ2 micromodul LV2 V01 A6M6 Live50 als with 6 audio tracks and 6 midi tracks micromodul LV2 V01 A12 Live50 als with 12 audio tracks micromodul LV2 V01 A8S4 Live50 als with 8 audio tracks and 4 sends micromodul LV2 V01 A6M2S4 Live50 als with 6 audio tracks 2 midi tracks and 4 sends micromodul LV2 DJ2 V02 A6 Live50 als with 6 audio tracks and send control via DJ2 In these sets we prepared a lot of control and button assignments for you which will surely guarantee a comfortable start Following elements are already assigned Faders Joystick Pan Encoders Send EQ Clip Main Clip control only works for Live50 Sets Keys Mutegroup Sologroup Track ctrl There are further assignments for the sets in connection with the DJ2 which are described further in the DJ2 manual Live41 sets work for all Live versions up from 4 1 so also in 5 0 or higher Live50 Sets which work up from Version 5 0 differ in so far as clip control is possible For Live Versions before 4 1 we don t have any configurations since these versions can not be controlled fully But you ca
28. oller useful for every type of music software A total of 11 track dependent for each of the 13 tracks and 22 track independent control change parameters from encoders and faders can be controlled by this instrument In addition the LV2 has 19 track dependent for each of the 13 tracks and 45 track independent note on note off parameters switching functions You can switch the faders between two groups 2 x 6 tracks The four encoders can work together with the selected track 13 tracks or switched to five fixed groups Clip FX3 FX4 FX5 amp Main The joystick can control dependent from the selected track 13 tracks or from 2 further fixed groups FX1 amp FX2 two parameters The 12 coloured track buttons on the micromodul LV2 Page 8 User manual bottom edge can control 12 switching functions dependent on the selected track Track ctrl amp Slot launch or 24 independent targets 12 x Scene launch amp 12 x FX ctrl Two of these key modes Mute group and Solo group can also be controlled group wise according to the selected group If you would like to use this controller for other programs you should first make sure it is possible to communicate with potis and faders via fixed midi control numbers For switching functions you need to be able to assign fixed midi note numbers The LV2 sends fixed control change events for all controls and fixed note on when being pressed and note off messages on release for all track b
29. ols etc Not for use in the vicinity of heat sources radiators ovens etc Operational temperature is in the range of 0 40 C Not for use in the vicinity of flammable material The instrument should not be in direct or prolonged contact with sunlight Dusty environmental conditions should be avoided Only for use with mains adaptors which comply with the specifications in this manual Only for use batteries which comply with the specifications in this manual Pay attention that batteries do not leak while in the instrument esp during extended storage When connecting to other instruments pay attention to the instructions in this manual No foreign objects are permitted inside the instrument casing No liquids should get inside the instrument casing Never let the instrument fall to the ground casing and or control elements may be damaged If the instrument must be opened for example to remove foreign objects from the casing or for other repairs this may only be done by qualified personnel The batteries must be removed and the mains cable must be disconnected before opening the instrument Guarantee is void for defects that occur if the instrument was opened by an unauthorised or unqualified person Use a soft towel or brush to clean the instrument Please do not use any cleaning liquids or water so you avoid any damages to the instrument micromodul LV2 Page 2 User manual Introduction I
30. r mouse but it is more comfortable to use the two encoders on your left if the Main function is activated the green LED next to the Main key has be on With the first left encoder you scroll vertically across the slots and by pressing the encoder you can launch the chosen clip With the encoder right next to it you can scroll horizontally that means choose different tracks By pushing this encoder the selected clip will be stopped With both encoders you can move easily through the matrix and quickly launch a clip Now adjust the volume of every single track with the faders or just mute one or the other track with the 6 keys in the first key line key mode of the first line has to be on Mute group With the corresponding LED s you can see which of these tracks is currently active not mute You adjust the Master volume very easily with your right encoder If one of the clips still misses some stridence it may need a little bit of EQ This is easy Select the track with the second encoder or even better through the corresponding numbered key in the key line below whilst you press the Shift key With the Pot ctrl key above you switch on the encoder to EQ control and now you can control the gains of the 4 EQ filter in your selected track via the encoders In order to bring the gains quickly back to zero you just need to push the encoder But even the control of clip parameters is easy with the LV2 from Live Version 5 0 After yo
31. r or key the powersave mode will be activated The LV2 can also be used with an external mains adaptor The adaptor regulated or not must have a DC voltage of 4 5 6 V and at least 50 mA You can find a suitable mains adaptor in our accessories The adaptor plug hollow plug 2 1 mm inner 5 5 mm outer must be polarised according to the information on the connection plate outer ring minus inner pin plus micromodul LV2 Page 7 User manual For wrong polarity of the plug the controller will not work A damage is however impossible You switch on the LV2 with the power switch at the back LED s shine If the power switch is on Adaptor the power will be supplied by the external mains adapter If the switch is on battery the battery will provide the electricity Pay attention to always switch off the controller in the battery mode if not used because that increases the durability of the batteries Connecting to a computer A midi cable is used to connect the LV2 to a computer and to the software This cable is connected to the midi out slot on the controller and the midi in slot on the computer sound card or midi interface In order to use the new possibilities concerning the parameter feedback of the second line you should also connect the midi in port on the LV2 with a midi out slot on the computer The midi in slot on the LV2 is also used to connect additional controllers and keyboards to the same midi port on t
32. s with the DJ2 micromodul LV2 DJ2 V02 A6 Live50 als with 6 tracks and send controls with the DJ2 You get further explaination in the DJ2 manual Please be aware of the order of interconnection don t use the DJ2 controller as the first instrument of the midi chain see chapter parameter feedback and don t forget to switch DJ2 to setup 2 in systemmode micromodul LV2 Page 18 User manual Controller numbers Joystick Control Change Number Note Number Joystick X Pan 20 31 Ch 10 13 36 Mastertrack Ch 10 13 Joystick Y Pan 0 11 Ch 10 13 16 Mastertrack Ch 10 13 Joystick X FX1 38 Ch 12 15 Joystick Y FX1 36 Ch 12 15 Joystick X FX2 39 Ch 12 15 Joystick Y FX2 37 Ch 12 15 Encoder Control Cange Number Note Number A Main rel 41 Ch 12 15 A Main Push 0 8 16 24 32 40 48 56 64 72 80 88 Ch 10 13 O Master track Ch 12 15 B Main 16 27 Ch 12 15 32 Master track Ch 12 15 B Main Push 1 9 17 25 33 41 49 57 65 73 81 89 Ch 10 13 1 Master track Ch 12 15 C Main abs 40 Ch 12 15 C Main Push 103 Ch 12 15 D Main abs 17 Ch 12 15 D Main Push 32 Ch 12 15 A Send abs 40 51 Ch 10 13 56 Mastertrack Ch 10 13 B Send abs 60 71 Ch 10 13 76 Mastertrack Ch 10 13 C Send abs 80 91 Ch 10 13 96 Mastertrack Ch 10 13 D Send abs 100 111 Ch 10 13 116 Mastertrac
33. se always take substitute batteries or rechargeables with you When the yellow LED starts blinking it is time to change the batteries quickly Arriving mididata is signalled as a flickering light from the Sys Mon LED in the system mode This is a way to check the correct cable or settings in Live To select the master tracks press the Shift key and the button of the right encoder This way you can easily choose and start a new scene via the first left encoder with pressed shift key Through a quick change to the system mode you can save all your settings like Pot ctrl Stick ctrl Group and keymodes When you start the controller next time you immediately have your equipment configurations available also see chapter start settings Do not necessarily try to use all of the allocations and switch possibilities for your performance because you can easily start a function you did not mean Especially the keymodes mislead to bring out everything of the LV2 which is a nice thing to do at home or in the studio but not for a performance It is better to enlarge your LV2 with a LX2 there you will find a number of additional keys and you don t have to switch the modes all the time Don t forget the fadermute function with which you can bring the fader or the joystick by pressing the shift key into position which it has on the display without sending a signal Thereby you can avoid bigger and audible value differences of your fader or joys
34. t must be device with activated feedback killer e g LV2 or LX2 micromodul micromodul LV2 Page 16 User manual Expanded sets micromodul is a system of controllers single controllers which are easily combinable and expandable to create a complete system Just connect the instruments with their midi interfaces and the system is ready for use The instruments are normally connected from right to left That means the midi out slot for the instrument to the right should go into the midi in slot of the instrument on the left and so on also see draft above An important point when combining the LV2 and LX2 is the order in which they are connected If you want to control these instruments in a useful manner the LV2 should be after the LX2 in the midi chain so connect the midi out on the LX2 to the midi in on the LV2 Controllers that accept commands must always be after controllers which send commands through the midi chain In order to analyse parameter feedback from Live the midi in slot of the first right controller has to be connected to the midi out slot of the computer Please also read the settings concerings the feedback in the chapter above Working with two micromodul LV2 s or LC2 s Multiple controllers is an especially attractive solution for the Live sequencer The LV2 was designed in order to be expandable In fact with two LV2 s or LC2 s you can control 12 tracks comfortable You have EQ s
35. t is 2006 After a successful start in 2004 of the first micromodul line we decided to demonstrate the second line with a lot of improvements and extensions First of all it is due to you the micromodul users that an even better micromodul line could be created caused by your experience with the first equipment and the following suggestions Certainly the new instruments are compatible in size and function to the old line Beyond that there are a lot of new functions which will supply entertainment Musical arrangements are the largest creative aspect in many areas of modern music Also the creation of new sounds and loops using the processing power of computers allows a large amount of fun from the very start We all know that really promotes creativity You only need three tools in order to use the new possibilities in loop based computer music A computer a laptop would be best Intuitive software such as Live from Ableton A hardware controller like the micromodul LV2 optimised for the software We designed a controller to support the playful use of loops Without a doubt Live from Ableton is a tool which in itself offers a huge potential when working with this sort of music But let s face it who wants to drive a car with a computer keyboard or a mouse Fact is slide controls knobs joysticks buttons and LED s are as much a part of electronic music as steering wheel is to a car Micromodul LV2 also called just LV2
36. the second key line both key lines in keymode Track strl Track 1 12 key 7 amp 8 Channel 11 setup 1 14 setup 2 Track 1 12 key 9 12 Channel 12 setup 1 15 setup 2 Mastertrack Channel 12 setup 1 15 setup 2 sel Track 1 2 3 4 5 6 7 8 9 10 11 12 Master Key 7 blue 6 14 22 30 38 46 54 62 70 78 86 94 14 8 blue 7 15 23 31 39 47 55 63 71 79 87 95 15 9 green 55 59 63 67 71 75 79 83 87 91 95 99 39 10 green 56 60 64 68 72 76 80 84 88 92 96 1100 40 11 red 57 61 65 69 73 77 81 85 89 93 97 101 41 12 red 58 62 66 70 74 78 82 86 90 94 98 102 42 micromodul LV2 Page 22 User manual Note numbers for special keys Channel 12 setup 1 15 setup 2 Note Number Key Pot ctrl upper 37 shift hold Pot ctrl lower 38 shift hold Main 126 shift hold Pot ctrl upper 35 main hold Play Pot ctrl lower 36 main hold Stop All polyphonic aftertouch events on all channels are reserved for internal system communications Such mididata should not be used with midi in since this could cause problems spontaneous switching of track and key mode with the micromodul system These events are only used by a few very expensive keyboards micromodul LV2 Page 23 User manual Troubles
37. tick This function is supported by the faderpos indication in connection with the faders also see chapter working with Live fader which is attractive after a continual group change If you are using more than 6 tracks intensively it is advisable to use a second LV2 in order to save continual group changings Eventually you got twice the numbers of encoders keys and even a second joystick so you can save a lot of switches Power Supply The LV2 does not contain an internal mains unit It was primarily designed for use with standard or rechargeable batteries 3 x AA cell 1 2 1 5 V alkaline NiCd NiMH which are inserted into a compartment on the bottom of the instrument Please pay attention to the battery poles when changing batteries This compartment has a safety screw which must be removed before batteries can be exchanged Batteries usually last between 30 and 60 hours based on quality and brand In order to increase the battery life span the instrument switches into its energy saving mode 10 minutes after the last movement was made on any controller An LED running light displays the energy save mode The instrument is still fully functional only the LED s are switched off to save power The instrument leaves the energy saving mode as soon as a control is moved primarily Shift The battery control LED yellow Sys Mon LED blinks when the batteries need to be replaced By holding shift at least 5 seconds without any other fade
38. trl for the first or second key line different keymodes per key line Channel 12 setup 1 15 setup 2 No Key 1 7 blue 43 2 8 blue 44 3 9 green 45 4 10 green 46 5 11 red 47 6 12 red 48 Note numbers in keymode Scene launch for the second key line both key lines in keymode scene launch Channel 12 setup 1 15 setup 2 No Key 7 blue 14 8 blue 15 9 green 39 10 green 40 11 red 41 12 red 42 Note numbers in keymode FX ctrl for the second key line both key lines in keymode FX ctrl Channel 12 setup 1 15 setup 2 No Key 7 blue 49 8 blue 50 9 green 51 10 green 52 11 red 53 12 red 54 micromodul LV2 Page 20 User manual Note numbers in keymode Mute group for the first or second key line different keymodes per key line Channel 10 setup 1 13 setup 2 No No Group 1 6 Group 7 12 Key 1 7 blue 2 50 2 8 blue 10 58 3 9 green 18 66 4 10 green 26 74 5 11 red 34 82 6 12 red 42 90 Note numbers in keymode Solo group for the first or second key line different keymodes per key line Channel 10 setup 1 13 setup 2 No No Group 1 6 Group 7 12 Key 1 7 blue 3 51 2 8 blue 11 59 3 9 green 19 67 4 10 green 27 75 5 11 red 35 83 6 12
39. u have chosen the relevant clip you switch the encoder with Pot ctrl key above to Clip control and the left encoder is ready to be used for transposing You can control the length of the loop with the right encoder but be careful the global quantization of the quantization menu just above at the display border has to be on 1 8 or 1 16 Just a quick stutter effect micromodul LV2 Page 5 User manual extremly distuning the clip or playing the clip a bit tonal is no problem Everything is very easy to handle because of the encoder snatches As is generally known Live is full with a number of crazy effects which you can control brilliantly with the LV2 So quickly drop a Grain Delay Effect from the browser to a track and with the lower Pot ctrl key switch the encoder to FX3 We deliberately did not take the FX assignations into our setups to leave the choice up to you So you have to set your hand to it and you will see how easy it is to assign the control elements on your own After you activated the midi mode in Live small midi key at the display border you click the small digit display left to feedback in the grain delay window and move the left encoder a few steps to the left number 15 24 appears in the window To switch the effect on or off we allocated one of the keys of the lower key line to it Then click onto the small window to your left in the mainline of the grain delay window and press the left blue key from the LV2 number
40. uttons You can not program the LV2 or assign controller numbers or key numbers but that is a function that is rarely needed with current programs The corresponding assignments are noted in the last chapter Control numbers You will find out how many parameters you can control and how you can switch modes in the following chapters Settings in the system mode You can activate the controller s system mode if you press both of the Pot ctrl keys The yellow Sys Mon LED next to shift is on to signal this mode No midi signals are sent as long as the controller is in this mode Only the incoming commands via midi in slot are sent directly to the midi out slot as long as the feedback killer is not activated The assignments of the LED s in the system mode are indicated on the backside of the controller In order to exit the system mode and to restart the controller in the normal operational mode just press these two buttons Pot ctrl keys again After that all LED s will turn off for two seconds and the system is restarted During this restart procedure all changes made in the system mode are stored If you turn the instrument off while it is in the system mode all changes will be lost By starting the system mode all start settings will be inherited also see chapter start settings In the system mode following settings are possible Joystick mode The valuechanges of the joystick can be inverted seperately for
41. ys just one track in Solo or Rec function works So please be cautions that the exclusiv function for arm and solo are activated in the Live preferences diverse A total update of all LV2 indication can be achieved by temporary activating the midi function in Live small midi switch right above the Live window This is neccessary if the LV2 was switched off or turned to the system mode Generally it is not necessary to use the parameter feedback The control is possible without the feedback as well but this is not as comfortable Arrangement When arranging a micromodul system you have to be aware of only a few but very important things in order to use the parameter feedback feature First of all you have to establish a midi chain that means the midi out slot of the computer is connected to the midi in slot of the first micromodul controller usually the right controller further from the midi out slot of that instrument to the midi in slot of the controller to its left and so on The last micromodul in this chain the instrument on the left has to be connected from it s midi out slot to the midi in slot of the computer The corresponding in and out ports in Live have to activated as well switch on the remote controle in preferences midi Beyond that following things have to be considered only activate the feedbackkiller function in the first right controller whose midi in is connected to the computer in a syste

Manual

Contents

Download Pdf Manuals

Related Search

Related Contents