Cadenza Instruction Manual
Contents
1. Required Tools Supplied Parts and Hardware 4 WARNING this product contains small items that could be a choking hazard if swallowed Before starting assembly verify all parts are included and undamaged If any parts are missing or damaged do not return the damaged item to your dealer contact Customer Service Never use damaged parts A WARNING this product contains a magnet If an implanted medical device such as a pacemaker or implantable cardioverter defibrillator ICD is in use magnetic fields may affect the operation of those devices resulting in serious injury or death If you have an implanted medical device keep at least 13 cm 5 in between your device and the magnet Please consult with your physician or medical professional prior to using this product A CAUTION Avoid potential personal injuries and property damage e Tempered glass has been chosen for this product because of its strength and safety characteristics However tempered glass should still be handled with care to avoid possible property damage or personal injury e Mishandling during shipping assembly or use may result in damage that can weaken the tempered glass e Periodically check the glass to look for chips cracks or deep scratches e If chips cracks or deep scratches are found discontinue use and contact customer service D Center Foot D I End Foot 2x2 Cabi2. Do not use the end feet PHA center foot LEY or screws 08 and GEN 2 Soundbar Preparation optional To make room for a soundbar or other long equipment Remove the dividers on one or both sides of cabinet RAJ Remove the support pins from cabinet D NOTE See STEP 5 on PAGE 9 to switch the front door panels with mesh screens to accommodate the speakers Divider Soundbar 3 Glass Panels Parts for STEP 3 lt Top Glass Panel Glass Shelf 3x1 x1 Set the glass shelf IT into place so the recessed holes in the glass line up with the glass supports Set the top glass panel i into place so the recessed holes in the glass line up with the glass supports Recessed Hole 4 Shelf Adjustment Remove the door and rail cover by removing the three mounting screws on each side of the cabinet bi Mounting Rail Cover Remove the four rack screws holding the shelf in place Reposition the shelf and secure with the four rack screws Reattach the door and rail cover using the mounting six screws Rail Cover Parts for STEP 5 eA AT CCOOOXXX 63 6 NNN OOOOOOO SL N NN RY NN N NN N NN N NN OOOOOOOOOOOOOOO Ce pe CAE Retaining Strip 5 Door Screens optional Screen Panel 4 x2 To utilize speakers behind the doors inside the cabinet Pull the 4 retaining strips from the back
3. SANUS Cadenza Instruction Manual Cadenza 75 We ll Make It Stress Free If you have any questions along the way just give us a call 1 800 359 5520 We re ready to help IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE MANUAL PRIOR TO USE Weight Limits FRONT VIEW 68 0 kg L BACK VIEW Cautions and Care CARE INSTRUCTIONS For wood with a natural finish dust regularly with a soft dry cloth When needed wipe with a clean damp cloth and wipe dry A CAUTION Avoid potential personal injuries and property damage Serious or fatal crushing injuries can occur from furniture failure To prevent failure This product is designed for use with flat panel TVs ONLY Do not exceed rated weight limits Place heaviest items in the lowest shelves Never allow children to climb or hang on shelves or doors Always unload furniture before moving Use of anti tip restraints may only reduce but not eliminate the risk of failure Do not use this product for any purpose not explicitly specified by manufacturer If you do not understand these instructions or have doubts about the safety of the installation assembly or use of this product contact Customer Service or call a qualified contractor Manufacturer is not responsible for damage or injury caused by incorrect assembly or use To prevent tipping be sure to center your flat panel TV NO CRTs on the top of your furniture
4. sanussystems Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein covers all details conditions or variations Nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document 2013 Milestone AV Technologies a Duchossois Group Company All rights reserved Sanus is a division of Milestone All other brand names or marks are used for identification purposes and are trademarks of their respective owners SANUS 6436 City West Parkway e Eden Prairie MN 55344 USA 6901 002271 00
5. net xt OOOOOOOOOOOOCo2 N Top Glass Panel Screen Panel 3x Glass Shelf ne 3x1 mm End Foot Screw Center Foot Screw oe E Qo UN Dimensions 61 0 1549 Cadenza 61 E KS 192 81 487 205 24 9 LC 632 3 O 22 4 O 1 19 4 ili NI 493 5 539 S Ets e 867 A 7 m B Cadenza 75 _ 19 2 d 487 205 24 9 CH 632 KEN 11U e 539 U Center Foot End Cap 03 xl 04 x4 mm End Foot Screw Center Foot Screw oe xs Carefully lift the cabinet X and lay it on its back onto a protective surface Slide the end feet MA Into the square tubing and secure using eight end foot screws B Press the end caps into the end feet PRA Install the center foot i using two center foot screws GEN Carefully lift and set the cabinet 01 upright on its feet For cabinet install to sit closer to the floor Press the end caps WW into the square tubing on the cabinet
6. of the door frame Remove the solid panel Install the screen panel into the door Replace the 4 retaining strips to secure the screen in place Retaining Solid Panel Strip 00000004400006 COO dt RRR RR AM 0400000004000004 KI IN N XX AM ROKK ANA IN N NN LK NN SS SS 6 Operation REMOVING THE BACK PANELS Remove the magnetic back panels of cabinet Mf by pulling away from the cabinet Replace by lining up the panels and allowing the magnets to catch the cabinet D CABINET DOORS AND DRAWERS The doors and drawers include an automatic closing mechanism simply close the doors or drawers until you feel the auto close feature take affect then release and allow the door or drawer to finish closing on its own Removal Doors See STEP 4 on PAGE 8 Drawers Pull outward on the latches on the underside of the drawer while pulling the drawer out and off the drawer rails Drawer NOTE Hold the latches outward while installing the drawers 10 TE LIMI70 1 Anti ti l t ip Strap Sold Se paratel y y E p Thank you for choosing Sanus Please take a moment to let us know how we did L Call us 800 359 5520 Email us info sanus com i Leave a review sanus com Di Find us on Facebook SANUS EJ Follow us on Twitter
Download Pdf Manuals
Related Search