Users Guide
Contents
1. In order to set the indication of achieving the selected temperature open setup submenu Use buttons X Y to select the setup icon shown on the display and press OK button and setup submenu will open on the display See the picture Use buttons X Y to se lect the icon of indication of achieving the selected temperature and 06 85 press OK button the on or off icon shown on the same row will start 12 34 to blink depending on whether the settings are switched on or off So In blinking mode the on off icon can be changed by using buttons La licel 3 X Y Confirm the selection by pressing OK button EE If the on off icon of achieving the selected temperature has been in the setup blinking mode for 20 seconds without pressing OK but ton the setup will halt and return to previously set mode Display will stop showing setup screen if you have not pressed any of the buttons within 20 seconds use buttons X Y to select exit setup icon and press OK button press button E i e return to main menu NB Default factory settings have the indication of achieving se lected temperature switched on The indication of achieving the se 10 lected temperature resets to default factory settings after connecting the product to power network power failure Steam generator service SERV The need for steam generator service is indicated by showing the SERV text on the display when switching on the steam function or when2. OBD BALTECO VARIO User manual VARIO ENG 1 IMPORTANT SAFETY CAUTION Never allow children to use the bath shower cabin without adult supervi sion to avoid accidents CAUTION Physically challenged people must exercise extreme caution and or use assistance if necessary when using bath shower cabin CAUTION Do not use external electrical devices while taking a bath or shower De vices located at the bath s vicinity being connected into electricity network must be fastened in such a way as to avoid their accidental falling CAUTION Upon failure damage or abnormal functioning of any appliances of the bath shower cabin a technical maintenance professional must be called Use of dam aged product or product with failure of any type is strictly forbidden Before using the bath check the water temperature in the bath Suitable is water temperatures up to 40 C Pouring over 60 C water into the bath shower cabin may damage the material Do not use the bath shower cabin when being intoxicated with alcohol or drugs Take care when entering or leaving the bath shower cabin to avoid injuries Consult your physician before using the bath when you re pregnant or suspect preg nancy Consult your physician before using the bath when being sick All the openings of the bath shower cabin must be clean and unobstructed 2 OPERATION To switch the display on press on off button A For a moment the display will indic
3. indicator next to the button will turn off Temperature setup Temperature can only be adjusted if the function is switched on Use X Y buttons to select activated steam function icon shown on the display and press OK button steam function submenu will be shown on the display See the picture In order to set the steam temperature use buttons X Y to select the temperature reading and then use left right buttons to adjust the reading Press left button to reduce the temperature min 35 C and press right button to increase max 50 C Press OK C 6 VARIO ENG button to save the selected temperature Display will stop showing steam function submenu if you have not pressed any of the buttons within 20 seconds use buttons X Y to select exit setup icon and press OK button press button D i e deactivate the function press button E i e return to main menu The most recently set temperature will be saved in the memory Indication for achieving the selected temperature Achieving the selected temperature is indicated provided that the indication for achieving the selected temperature is switched on see Section 2 6 Setup by green ceiling light when reaching the temperature 5 C lower than the set temperature Green light will be on until pressing any button After pressing any button the light turns white Light can be switched off by pressing button B Display messages related to steam functi
4. recommended to clean the bathtub shower cabin immediately after every use with thorough rinse of warm water and dry with soft and dry cloth to avoid water stains e Washing with soap or hand dishwashing liquid and water is usually sufficient to re move surface dirt or stains Upon need of thorough cleaning wide variety of bath cleaning sprays sold with safety labelling allowing the cleaning of such surface or commercially available solid surface cleaners are effective Drying is an important step preventing a build up of soap film or cleaning residue which can create the appearance of light scratches over time 3 2 PREVENTING DAMAGE Some chemicals are not compatible with Solid Surface materials and could perma nently harm the surface beyond repair Avoid surface contact with e Strong chlorinated solvents Chloroform e Ketones e Methylene chloride acetone turpentine paint removers nail polish remover Very strong acids such as concentrated sulfuric and hydrochloric acids Acid drain cleaners stove and toilet cleaning products should not be used e Other unknown chemicals or chemicals not allowed for cleaning of Solid Surface materials Surfaces exposed to these chemicals should be promptly flushed with water contact may cause spots that may require extensive repairs Remove nail polish with a non acetone based nail polish remover and flush with water e Avoid subjecting Xonyx Solid Surface to extreme hot temperatu
5. using buttons X Y Press OK button to start the massage programme The display will simulta neously show massage speed 1 to 3 under functioning activated massage programme Massage speed can be changed by using left right buttons Programme will always start at speed 2 Speed can be changed while the programme is activated Speed cannot be saved In order to stop activated massage programme press OK button press button F Display will stop showing hydromassage submenu if you have not pressed any of the buttons within 20 seconds provided that none of the massage programs are activated use buttons X Y to select exit setup icon and press OK button switch massage function off by pressing button F press button E i e return to main menu l k COMFORT 1 COMFORT eg COMFORT 3 COMFORT H THERAPY 1 THERAPY d THERHRY 3 THERAPY H l k COMFORT 1 183 COMFORT e COMFORT 3 COMFORT H THERAPY 1 THERAPY g E 2 6 SETUP Icon on the display No guick button Time setup Open setup screen to set the time Use buttons X Y to select the setup icon shown on the display and press OK button setup sub menu will open See the picture Use X Y buttons to select time setup icon and then press OK but ton the hour reading will start blinking Blinking hour reading can be adjusted by using buttons X Y After setting the hour reading to desired number you may also set the minutes reading by pressi
6. ase contact the dealer for further information VARIO ENG P S Manufacturer reserves the right to change technical aspects on the products without prior notice 4 TECHNICAL DATA Electrical eguipment Voltage 230 V Freguency 50 Hz Rated power 3150 W Rated current 13 5 A Frequency range 76 108 Hz e SND BALTECO AS Balteco J lgim e 76401 Harjumaa Estonia Phone 372 6 718 237 Fax 372 6 718 236 www balteco com
7. ate time temperature and all the icons of currently inactive functions chromo light B steam D radio C hydromassage F and setup To deactivate all functions pressing on off button A again display enters into standby mode The clock reading after connecting the product to the power network is 00 00 In order to adjust the clock reading 00 00 you need to set the time see Section 2 6 In case of power failure the clock reading will reset to 00 00 unless the power failure lasts less than 5 minutes All functions become inactive and the display will enter into stand by mode only the indicator of errant time is lit on the display 60 minutes after pressing any button or 20 minutes after deactivating the last function If the product is connected to the power network the control panel will show the so called errant time All functions can be activated after pressing button A to switch on the steam sauna In order to switch a function on 1 use a quick button 2 use buttons X Y to select the icon of deactivated function and press OK button VARIO ENG LED indicator Ouick button ON OFF TES Chromo light Radio 100 1 TEN 8 Quick button CHROMO LIGHT Ms team Hydromassage D Quick button STEAM Setup Jii Steamgenerator service XC Quick button RADIO Quick button SCOTTISH SHOWER VARIO ENG 2 1 CHROMOTHERAPY LIGHT Ouick button is available on the control panel Button B allows switching the function on
8. button down for longer than 2 5 seconds the 100 1 radio will enter into automatic search mode i e the search will halt milli when finding a radio station PA Press OK button to save a radio station the icon indicating the fre 1 094 0 quency numbers must be activated and the cursor must be in front of the icon The station frequency of the first memory slot starts to g B 106 1 blink If you want to save the selected frequency under a memory 1 1 slot other than the first one then use buttons X Y to select relevant vin memory slot After selecting a memory slot station freguency is lt OFF blinking press OK button The frequency is saved and the radio will E continue broadcasting the selected station closed position Setting the timbre e Use buttons X Y to select the timbre icon shown on the display in 100 7 radio submenu and press OK button the display will show all four versions of timbre icon Currently saved timbre icon is shown as alll active When selecting corresponding timbre versions by using left right buttons the timbre will change immediately but it will not be 1 094 0 saved Press OK button to save the selected timbre After pressing B 106 1 OK button the display will continue showing the icon of the version 2 i of saved timbre in radio submenu VARIO ENG Colour music Use buttons X Y to select the colour music icon displayed in ra dio submenu and press OK button the fu
9. cator next to the button will light up and cursor will move to the activated icon It is then possible to adjust the volume by using left right buttons Use left button to reduce volume and right button to increase volume If the cursor is at the radio icon and the icon is ac tivated press OK button to open radio submenu See the picture Use buttons X Y to select memory slots for radio station in the ra dio submenu the radio will operate at the frequency saved under corresponding memory slot Display will stop showing radio screen if you VARIO ENG have not pressed any of the buttons within 20 seconds use buttons X Y to select radio icon and press OK button use buttons X Y to select the exit setup icon and press OK button press button C i e switch the function off 100 1 press button E i e return to main menu iil NB In order to allow more comfortable adjustment of radio volume 1 HB the cursor will automatically go to the radio icon if no buttons have gp Im been pressed within 1 minute provided that the radio is switched on 3 088 3 T Searching and saving radio stations es E In order to search radio stations open radio submenu on the dis play Then use buttons X Y to select the number of the memory slot and left right buttons to search for stations Short press press the ca button for up to 2 5 seconds allows manual search for radio stations If you hold the left right
10. eading can be adjusted at 5 minute intervals by using buttons X Y The icon shown on the timer row is either on or off depending on VARIO ENG VARIO ENG whether the timer is switched on or off In blinking mode the on off icon can be changed by using buttons X Y Press OK button to switch the timer on if there is icon ON behind the time reading You can select on off icon by pressing button P If the timer is switched on the timer icon will be shown next to the steam function icon on the main screen and the timer icon will also be shown behind the time reading in standby mode NB The user may if so desired use the steam before the time previously set for switching on the steam but the preset automatic switch on will be deactivated If timer reading has been in the setup blinking mode for 20 seconds without pressing OK button the tim er setup will halt and display will stop showing setup submenu Display will stop showing setup submenu if you have not pressed any of the buttons within 20 seconds use buttons X Y to select exit setup icon and press OK button pressing button E i e return to main menu NB a Timer for steam function can be set maximum 24 hours in ad vance b If the steam function is turned on by using timer setting and the temperature of 33 C is not achieved within 15 minutes the steam function will be switched off Setting the indication of achieving the selected temperature
11. nction will switch on i e the chromotherapy lamps in steam sauna will light up according to the sound and the icon of four different versions of colour music 100 7 will be displayed At the same time the chromotherapy light icon on the main screen will be activated and the LED indicator next to the MTTL chromotherapy light guick button will light on When selecting corre sponding four versions of the function by using left right buttons the 1 094 0 settings will change immediately but the change will not be saved g 1061 Press OK button to save the selected version After pressing OK S button the display will continue showing the icon of the selected version of colour music Colour music function will switch off after using quick button to switch off chromotherapy light button B or radio button C 2 3 STEAM Quick button on control panel Press button D to switch this function on off When pressing button D to switch the function on the display will show active icon of the steam function the LED indicator next to the button will light up and the cursor will move to the activated icon and the temperature reading will start to blink Blinking reading will indicate preselected temperature Blinking will continue for 10 seconds after switching the function on Then the reading will start to show current tem perature Press button D again to switch off steam function The steam func tion icon will be deactivated and the LED
12. ng button P Only the minute reading will start blinking after pressing button P blinking minute reading can be adjusted by using buttons X Y In order to save the time set in blinking mode press OK button If the time has been in setup blinking mode for 20 seconds and no buttons have been pushed the time will automatically restore to the settings used before entering into setup mode and display will stop showing setup screen Display will stop showing setup screen if you have not pressed any of the buttons within 20 seconds use buttons X Y to select exit setup icon and press OK button press button E i e return to main menu NB Time always needs to be set after connecting the product to the power network power failure The need to set the time is indicated by reading 00 00 on the display Setting timer for steam function In order to set the timer you need to open setup submenu Use X Y buttons to select setup icon shown on the display press OK button and setup submenu will open See the figure Use buttons X Y to select steam function timer icon and press OK button the hour reading of the timer will start to blink The blinking reading shows the most recently set time Blinking hour reading can be adjusted by using buttons X Y After setting the hour reading you may also set the minute reading by pressing button P Only the minute reading will start to blink after pressing button P The blink ing minute r
13. off After pressing but ton B 3 white LED lamps light up the chromotherapy function icon 0 on the display is activated and the led indicator next to the button lights up In this mode you can manually choose switch between AUTOMATIC 7 different colours by pressing left right buttons Chromotherapy PAu iiini submenu will open after pressing OK button while the cursor is at the active chromotherapy icon The screen will show the following icons from top to bottom 1 automatic mode 2 manual mode 3 exit setup In order to choose suitable setting e g automatic use buttons X Y to select desired icon and press OK button After pressing OK but ton the function will be set to automatic mode activation of which is indicated by rotating chromotherapy light icon in the main menu Display will stop showing chromotherapy submenu if you have not pressed any of the buttons within 20 seconds use buttons X Y to select chromotherapy icon and press OK button use buttons X Y to select exit setup icon and press OK button press button B i e deactivate the function press button E i e return to main menu Exit 2 2 RADIO Quick button on the control panel Press button C to switch the function on off The radio will play the two most recently selected stations used last time when pressing button C At the same time active radio icon and radio station frequency will be shown on the display LED indi
14. ons After switching on the steam the steam icon starts to blink If you bring the cursor to steam icon and press OK the steam submenu will appear on the display If display shows E1 the steam generator is not dispensing water If display shows E3 there is a problem with the power supply of steam generator SERV see Section 2 6 2 4 SCOTTISH SHOWER Quick button on control panel When pressing and holding down button E only cold water will start to run from the ceiling shower only active Scottish shower icon will be shown on the display and the LED indicator next to the button will light up The function only works when the display shows main menu NB Press button E while in submenu to return to main menu i e back escape VARIO ENG 2 5 HYDROMASSAGE Use Button F to switch the function on off In order to use this func tion the mixer should be in open position and the water diverter should be in the Massage position After pressing button F the dis play will show active hydromassage icon the LED indicator next to the button will light up the cursor will move to the activated icon and hydromassage submenu will be shown on the display at that moment none of the programmes are functioning yet The following icons will be shown 1 COMFORT 1 2 COMFORT 2 COMFORT 3 COMFORT 4 THERAPY 1 THERAPY 2 THERAPY 3 THERAPY 4 EXIT SETUP I CO SD Lon PESO D Suitable programme can be activated by
15. res or hot objects Solid Surface has excellent heat resistant properties However placing heat generat ing appliances or hot objects can damage the surface Avoid exposing Xonyx Solid Surface to strong chemicals listed above Never cut on a Solid Surface surface to avoid scratching the surface Avoid dropping heavy and or sharp objects on the surface as it may harm the sur face or altogether break the product beyond repair VARIO ENG 3 3 DISINFECTING Solid surface is not manufactured with any material that would promote the growth of any bacteria such as mold or mildew 3 4 CLEANING OF DRAINAGE SYSTEM The drainage system is assembled from standard plastic drain components To re move a possible clog up a standard household drainage cleaning agent may be used that is allowed for such purpose Remove the drain cover by turning it contra clock wise baths or pull it up off shower trays and pour carefully the cleaning agent to the drain tube not spilling the pipe cleaner over product surfaces 3 5 STEAM GENERATOR SERVICE Look section 2 6 Steam generator service SERV 3 6 REPAIRS For possible need of repair of the product please contact the dealer for further infor mation Minor damage that may accidentally occur is most often repairable 3 7 LIMITED MANUFACTURERS WARRANTY Limited Manufacturers Warranty covers the product against concealed defects and or other defects that appear only if the product ha
16. s been used according to this instal lation manual Limited Manufacturers Warranty is limited only to repairs and or replacement of de fective parts and the Manufacturer does not accept any further liabilities of any kind beyond that e Limited Manufacturers Warranty only applies if all shipping storing installation operation and maintenance cleaning conditions have been duly followed e Limited Manufacturers Warranty covers only the replacement of the subparts suffer ing the defects and does not cover any shipping and or replacement charges Limited Manufacturers Warranty does not cover normal wear of the unit upon inten sive use or any damage to the unit or its sub parts in result of improper and or blatant use of the unit Limited Manufacturers Warranty for any parts in contact with water does not cover the defects and or malfunction arising from water hardness or impurity or negligent cleaning problems Limited Manufacturers Warranty does not cover any indirect losses and or loss of profits nor does cover any indirect or related costs arising from the defect or malfunc tion of the unit Gloss reduction scratching and staining on solid surfaces incurred over time due to use is NOT a manufacturing defect but is considered normal wear and tear The forgoing is NOT covered under the Limited Warranty However the product can be re sanded and repolished For possible need of repair repolish of the product ple
17. the function is active In order to service the steam generator open setup submenu For that purpose use buttons X Y to select the setup icon shown on the display and press OK button which will open setup submenu See the picture Use buttons X Y to select steam generator service SERV icon and press OK button the SERV icon on the display starts blinking and the steam generator is ready for service Steam function is blocked and cannot be switched on Then pour 500 ml of special service lig uid in the generator through a corresponding orifice Service cycle will last 3 hours and the SERV icon will be blinking on the display during the entire cycle Steam generator service is completed if the SERV icon is no longer shown on the display Display will stop showing setup submenu if you have not pressed any of the buttons within 20 seconds use buttons X Y to select exit setup icon and press OK button press button E i e return to main menu NB All the other functions beside steam function can be used when performing the service 11 VARIO ENG 06 85 i mitn e VARIO ENG 2 7 USING THE MIXER 2 8 JETS VARIO ENG 3 MAINTAINANCE Xonyx solid surface baths and shower trays are finished with a silky surface finish Xonyx is a very durable product that will last for years with simple care Follow the recommendations below to properly clean Xonyx M solid surface product 3 1 EVERYDAY CARE e It is
Download Pdf Manuals
Related Search