User Manual
Contents
1. not up to date Please check with your local distributors for the latest information No part of this document can be copied or reproduced in any form without written consent from the company Trademarks All trade names and trademarks are the properties of their respective companies Copyright 2013 All Rights Reserved Installation package This unit can be installed by din rail mounted or wall mounted Din rail brackets and wall mounted bracket are included Wall mount bracket x 2 Power connection LATA DAIMA LED indicator Industrial Ethernet Switch PW1 ON when V1 V1 is connected PW2 ON when V2 V2 is connected This unit has no POE feature the POE amber LED will always stays in OFF status Relay LED Amber Green LED ON one power is connected ON Link Flash TX RX OFF two powers are connected Specification IEEE Standard IEEE 802 3 10Base T Ethernet IEEE 802 3u 100Base TX Fast Ethernet IEEE802 3x Flow Control and Back Pressure Switch Architecture Back plane Switching Fabric 1 6Gbps Data Processing Store and Forward Flow Control IEEE 802 3x Flow Control and Back Pressure MAC address Table Size 1K Packet Buffer Size 1M Network Connector 8xRJ 45 10 100BaseT X auto negotiation Auto MDI MDI X function Full Half duplex UTP STP above Cat 5e Cable EIA TIA 568 10 ohm 100m Networ2. 68 2 6 Vibration EN 50155 EN 60068 2 27 Shock EN 50155 EN 60068 2 32 Free Fall 142 qu 105 ion 6 36 20 Housing Dimens 7 142 N wo
3. User Manual Industrial Fast Ethernet 8 port Ethernet Switch Power input 12 56VDC 40 C to 75 C FCC MARKING This Equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CE MARKING This equipment complies with the requirements relating to electromagnetic compatibility EN 55022 class A for ITE the essential protection requirement of Council Directive 2004 108 EC on the approximation of the laws of the Member States relating to electromagnetic compatibility Company has an on going policy of upgrading its products and it may be possible that information in this document is
4. k Cable Protocol CSMA CD PW1 Power 1 Green PW2 Power 2 Green SW relay Amber LED TX RJ 45 port LNK Link Active Green Housing Heavy Metal Housing Reserve polarity protection Present Overload current protection Present Power Supply Redundant Dual DC 12V 56V Power Input Power Consumption 3W 48 VDC full load Alarm Relay Contact Relay outputs with current carrying capacity of 1 A 24VDC Relay in short circuit mode when 2 powers are connected in open circuit mode when only one power supply is connected POE power n a Removable Terminal Block Provide 2 Redundant power Alarm relay contact 6 Pin Wire range 0 34mm 2 to 2 5mm 2 Solid wire AWG 12 24 14 22 Stranded wire AWG 12 24 14 22 Torque 5lb In 0 5Nm 0 56Nm Wire Strip length 7 8mm Operating Temperature 40 C 75 C fully tested Operating Humidity Storage Temperature 5 to 95 Non condensing 40 C 85 C MTBF mean time between failure 510 304 hrs MIL HDBK 217F at 25 C Housing Rugged Metal IP30 Protection Case Dimension L x W x D 142mmx36 2mmx105mm LxWxD Installation mounting DIN Rail mounting and Wall Mounting Certifications EN55022 24 ITE equipment EN55011 Industrial Scientific and Medical ISM equipment Safety TEC EN60950 1 EMC EMS CE FCC VCCI EMI FCC Part 15 Subpart B Class A CE EN 55022 Class A EN 50155 EN 600
Download Pdf Manuals
Related Search