Wireless Weather Station
Contents
1. Current temperature and humidity at remote sensor Minimum temperature and humidity at remote sensor Maximum temperature and humidity at remote sensor Resetting the Max Min Channel Temperature and Humidity Memory In Temperature and Humidity Mode press and hold MEMORY MEM to clear memory for all channels Remote Sensor Status The wave icon above the current channel display shows the connection status of the corresponding remote sensor 29 Searching for remote sensor signals SN E EN HAN Corresponding remote sensor successfully linked Communication error between remote sensor and main console Activating Main Console Unit to Search for All Remote Sensor Signals The main console unit may be manually activated to search for signals from all remote sensors Only use this function of the communication error icon is visible on the main console Press and hold DOWN to enforce a search Rain Mode The main console unit records the total amount of rainfall for the last hour last 24 hours yesterday last week and last month The rainfall may be displayed in mm or inches A daily rainfall alert function is available which can be programmed to sound if the daily rainfall exceeds a pre configured limit Accessing Rain Mode From the main console unit Press UP or DOWN until the RAIN icon on the display starts flashing Viewing Rain Statistics In Rain Mode each press of SET or MEMORY2. ILI TNI mE NEN NEED ENS NUDO ND UNO 8 ELE OU WES QULA BEN EN DEW fum Pe mbor 24 18 12 6 3 2 1 O Hr msu Local Pressure Sea Level Pressure Altitude k Clock and Alarm Mode e Radio Controlled clock showing current time and calendar e Single alarm weekday alarm and pre alarm Signal Statue mapan SL Clock Mode icon p ga m Time Date Display SUNRISE SUNSET Sunrise Sunset Mode e Sunrise and sunset times e Longitude and Latitude of local area NEXT DAY UAR time E of Of JA t mE mE I Lu D Tm I Battery Status Pd am ve Single Alarm hu ts EIN p w Weekly Alarm Weekday City Secondi Year UTC time Display ae time Longitude aniio m Sunrise Sunset icons Temperature and Humidity Mode Temperature and humidity trend and readings for indoor and selected channel e Comfort level e Dew point e Temperature alerts Low battery icon for Channel Temp sensor unit Channel Temp Trend didi Humidity Temp Qui cepi ge _ Channel Humidity Trend Reception status T al e 2c Cycling Display es i 0 Au c I Comfort Level Min Max Display TES he Indoor Temp Trend e morg Indoor Humidity Trend Temperature and E jj L E N I i Humidity Mode icon IN i i C ML b i v Indoor Humidity Indoor Temp Rain Mode e Precipitation amount for last hour last 24 hour yesterday last week and last month e Rainfall alert Rain Statist
3. should be displayed Viewing Moon Phase History and Forecast 1 In Pressure and Weather Forecast Mode press MEMORY MEM 2 0 days should be flashing 3 View Moon Phase History Forecast Press UP or DOWN to choose number of days forward days or backward days from current date Press and hold either button for fast advance 4 The corresponding moon phase will be shown 5 To exit press MEMORY MEM Otherwise if no buttons are pressed for 5s the display automatically returns to Pressure and Weather Forecast Mode 20 Understanding the Weather Forecast Display Display Weather Forecast Status Partly Cloudy Cloudy Rain Unstable Weather NOTE The accuracy of a general pressure based weather forecast is about 70 The weather forecasts It may not necessarily reflect the current situation The Sunny icon as applies to night time implies clear weather 21 Understanding the Moon Phase Diagram Od FULL FIRST Clock and Alarm Mode The main console unit can be configured to display the time calendar or UTC time There are three time alarms available on the console unit Single alarm activated once at specified time Weekday alarm activated everyday from Monday to Friday at specified time Pre alarm activated at specified time interval Fixed 30 min ahead of weekday alarm if channel 1 temperature falling to 2 C or below The snooze duration for the above ala
4. MEM rotates display between different rain statistics e Last hour e Last 24 hour e Yesterday e Last week 30 e Last month Tip For an estimation of the rain rate the Last Hour rainfall value can be understood as inch hr or mm hr Resetting the Rainfall Statistics Memory In Rain Mode press and hold MEMORY MEM to reset all rainfall statistics Setting Units for Rain Display inch or mm In Rain Mode press and hold SET to convert units between mm and inches Activating Deactivating the Daily Rainfall Alert 1 In Rain Mode each press of ALARM CHART rotates display between the current rainfall statistics and the daily rainfall alert ALARM HI will be displayed If the alert is deactivated OFF will be shown otherwise the rainfall alert value is shown 2 When the rainfall alert is displayed pressing UP or DOWN will activate deactivate it Setting up the Daily Rainfall Alert 1 In Rain Mode press ALARM CHART to display rainfall alert 2 Press and hold ALARM CHART until rainfall alert and ALARM HI starts flashing in the display 3 Set Value for Rainfall Alert Press UP or DOWN to adjust value Press and hold either button for fast advance Press ALARM CHART to confirm your selection 4 Upon completion the display will be returned to the rainfall alert display Disabling when Daily Rainfall Alert is Activated To Disable Rainfall Alert 1 Press ALARM
5. RF The weather station supports a maximum of 5 pairings with thermo hygrometers allowing 5 measurements of temperature humidity from different locations on the display Features Weather Forecast Sunny Partly Cloudy Cloudy Slight Rain Heavy Rain Snow and Unstable Weather conditions Pressure Current or historical pressure mBar hPa mmHg or inHg Altitude or sea level pressure adjustment for atmospheric pressure compensation Pressure trend indication Sea level pressure history for the last 24 days Sea level pressure history bar chart Moon phase 12 steps of moon symbols Scans moon phase for year 2000 to 2099 Moon phase history for the last or future 39 days Radio Controlled Clock Time and date synchronized by radio signal DCF 77 to atomic clock precision time and date also manually adjustable Clock and Calendar 12hr 24 hr month day or day month Different combinations of clock and calendar displays 6 languages for day of week English German French Italian Spanish Dutch Alarms Single alarm activated once at specified time Weekday alarm activated everyday from Monday to Friday at specified time Pre alarm activated ahead of single or weekday alarm if channel 1 temperature falling to 2 C or below Fixed 30 minutes Programmable snooze function 1 15 minutes Sunrise time and sunset time Calculates sunrise set times with geographical information provided by user DST zone time offset la
6. sensor Make sure that water does not collect at the base of the unit The rainfall measurement mechanism utilizes a magnet hence do not place any magnetic objects around the proximity of the sensor Setting up the Solar Powered Wind Meter ONE e Assemble the wind cups to the anemometer arm Attach the assembled anemometer to the base Open the battery holder in the base by unscrewing the screws Make sure to disconnect the cable from the battery back that is used by the solar panel it might already be disconnected Press the link button on the main console Insert 2 x AA size 1 5V batteries into the battery holder in the base within 30 seconds Now reconnect the cable from the battery back Mount the anemometer onto a vertical surface using the fittings provided 11 The wind direction measurement is calibrated in the factory If you find the wind direction to be inaccurate it is possible to calibrate the wind meter with the following procedure a Insert the batteries b Point the wind vane towards the north Use a compass or map if necessary c Use a pin to press the SET key which is in the battery compartment of the wind sensor Placement tips e Check that wind can travel freely around the anemometer and is not distorted by nearby buildings trees or other structures e For better results place the anemometer at least 3m above local structures and obstacles The ground creates a frictional effect to
7. CHART to disable the alert 31 Wind Mode The wind direction is shown by an animated compass display Its angle can be displayed as compass points i e NW or in bearings from the north i e 22 59 The upper left of the wind display can be set to indicate the temperature at the anemometer or the temperature adjusted with a wind chill factor The lower left of the wind display indicates the average wind speed for the last 10 minutes as well as gust wind speed alert and gust alert information It can also show records of the maximum values of wind speed and gust attained for the current day The wind speed and gust alert functions can be programmed to sound if the wind speed or gust exceeds a pre configured limit The wind speed may be displayed in km h mph m s or knots Note The wind speed alert has a 5 mph hysteresis and the wind gust speed alert has a 7 mph hysteresis The hysteresis is to prevent the alerts from sounding constantly due to small fluctuations near the alert value This means that after the wind speed reaches the alert value it will have to fall below the alert value plus the hysteresis to deactivate the alert Accessing Wind Mode From the main console unit Press UP or DOWN until the WIND icon on the display starts flashing Configuring Wind Display In Wind Mode each press of SET rotates display between Temperature with wind chill wind direction in bearings e Temperature with wind chill
8. DST selection 6 Upon completion the display will be returned to Sunrise Sunset Mode Note Press and hold SET anytime during the setup to return to normal Clock and Alarm Mode All settings made will be discarded Viewing the Location Data In Sunrise Sunset Mode each press of SET rotates display between e Time and sunrise sunset Times e Calendar and sunrise sunset Times e Calendar and longitude latitude Viewing Sunrise Sunset Times for Different Dates 1 In Sunrise Sunset Mode press MEMORY MEM The date should be flashing 26 2 Press UP or DOWN to adjust date Press and hold either button for fast advance 3 The corresponding sunrise and sunset times will be displayed for the selected date 4 Press MEMORY MEM or SET to return display to Sunrise Sunset Mode Understanding the Sunrise Sunset Display The sunrise time being displayed differs during the morning and the afternoon night From 12 am to 12 pm The sunrise time for the current day will be displayed From 12 pm to 12 am The sunrise time for the next day will be displayed NEXT DAY icon will be displayed above the sunrise time At certain locations especially those at high latitudes sunrise and sunset events may not occur within a 24 hour time frame Display Sunrise status Display FULL Sunrise at FULL Sunset status at next previous day day or later No sunrise for the No sunset for the whole day whole day Temperature a
9. SP Paraguay DST SQ Iran DST maybe changed annually ST Tasmania DST SU Standard American DST SZ New Zealand DST NO DST no Places that do not observe DST ON Always add 1 hour with local standard time 41 Technical Specifications Weather Station Receivers Receiver Supply 6 0V Ta 23 C and Sensor unit Supply 3 0V Ta 23 C RF Transmission Frequency RF Reception Range Thermo hygro Sensor Wind Sensor Rain Sensor Barometric Pressure Range At sea level Altitude Compensation Range Barometric Pressure resolution Barometric Pressure accuracy Outdoor Temperature Display Range Indoor Temperature Display Range Operating Temperature Storage Temperature Temperature accuracy Temperature resolution Humidity Display Range Humidity accuracy Humidity resolution Receiving Cycle Remote Thermo Hygro Rain gauge Wind sensor Sunrise and Sunset Accuracy Wind Direction Range Wind Direction Accuracy Wind Direction Resolution Wind Direction Starting Threshold Wind Speed Range 868 MHZ 50 meters maximum Line of Sight 50 meters maximum Line of Sight 500 hpa to 1100hpa 374 5 mmHg to 823 8 mmHg 200m to 5000 m 657 ft to 16404 ft 0 1 hpa 0 003 inHg 0 08 mmHg 5 hpa 0 015 inHg 0 38 mmHg 40 C to 80 C 40 F to 176 F 9 9 C to 60 C 14 2 F to 140 F 5 C to 50 C 28 F to 122 F 20 C to 70 C 4 F to 158 F 1 C or 2 F 0 1 C or 0 2 F 0
10. Second e Month Day Year or Day Month Year depending on settings Activating Deactivating the Time Alarms 1 In Clock and Alarm Mode each press of ALARM CHART rotates clock display between Weekday Alarm Time displays OFF if weekday alarm deactivated Single Alarm Time displays OFF if single alarm deactivated Pre Alarm Time displays OFF if pre alarm deactivated 2 When the above alarms are displayed pressing UP or DOWN will activate deactivate the corresponding alarm Note Press SET anytime during alarm selection mode to return to normal clock display Setting up the Time Alarms 1 In Clock and Alarm Mode press ALARM CHART to select alarm which you wish to configure Press and hold ALARM CHART until hour starts flashing in the display 2 Set Alarm Hour 23 Press UP or DOWN to adjust value Press and hold either button for fast advance Press ALARM CHART to confirm your selection 3 Set Alarm Minutes Press UP or DOWN to adjust value Press and hold either button for fast advance Press ALARM CHART to confirm your selection 4 Set Duration of Snooze Function all three alarms share same snooze time duration Press UP or DOWN to adjust value Press and hold either button for fast advance Press ALARM CHART to confirm your selection 5 Upon completion the display will be returned to the alarm selection screen Note Pre alarm cannot be activated if weekday alarm or single alarm
11. advance Press ALARM CHART to confirm your selection 4 Upon completion the display will be returned to the wind alert selection screen Disabling when Wind Alert is Activated Press ALARM CHART to disable the alert 33 Maintenance Changing Batteries The battery statuses of the sensors are checked every hour If the low battery indicators light up replace the batteries for the corresponding unit immediately Changing Batteries for the Remote Sensors 1 Replace the batteries following the setup instructions for the corresponding sensor 2 When the batteries are properly installed the sensor will resume sending signals to the main console unit Cleaning The main console unit and outer casings for the remote sensors can be cleaned with a damp cloth Small parts can be cleaned with a cotton tip or pipe cleaner Never use any abrasive cleaning agents and solvents Do not immerse any units with electronic parts in water or under running water Anemometer Check that the wind vane and wind cups can spin freely and are free from dirt debris or spider webs Rain Sensor Like all rain gauges the rain sensor is prone to blockages due to its funnel shape Checking and cleaning the rain sensor from time to time will maintain the accuracy of rain measurements e Detach the protective screen and lid Remove any dirt leaves or debris by cleaning the items with soapy water and a damp cloth Clean small holes and part
12. e Rain Sensor 1 Unlock the funnel shaped top of the rain sensor by turning both knobs on the sides of the rain sensor in an anti clockwise direction Press the link button on the main console Lift the top off the base and insert 2x AA size 1 5V batteries into the battery holder within 30 seconds Replace the lid and secure into place by turning the knobs clockwise 10 Place the rain sensor in a location such that precipitation can fall directly into the sensor ideally 2 3 ft above the ground It may be secured into place by using the four screws provided The sensor must be accurately level for optimum performance To check if the sensor is level remove the lid and check if the ball bearing inside is at the midpoint of the leveler Additionally a bubble level or carpenter s level may be used Attach the protective screen onto the top of the lid The screen will prevent any debris entering the sensor Placement tips The rain sensor should be placed in an open area away from walls fences trees and other coverings which may either reduce the amount of rainfall into the sensor deflect the entry of wind blown rain or create extra precipitation runoff Trees and rooftops may also be sources of pollen and debris To avoid rain shadow effects place the sensor at a horizontal distance corresponding to two to four times the height of any nearby obstruction It is important that rain excess can flow freely away from the
13. essure and Weather Forecast Mode Setting the Pressure and Altitude Units 1 In Pressure and Weather Forecast Mode press SET until local pressure is displayed 2 Press and hold MEMORY MEM The pressure unit should be flashing 3 Set Local Pressure Units Press UP or DOWN to adjust value Press SET to confirm your selection 4 SetAltitude Units Press UP or DOWN to adjust value Press SET to confirm your selection 5 Set Sea Level Pressure Units Press UP or DOWN to adjust value Press MEMORY MEM to confirm your selection 6 Upon completion the display will be returned to Pressure and Weather Forecast Mode Viewing the Sea Level Pressure History 1 In all modes pressing HISTORY will toggle the sea level pressure display 2 When sea level pressure is displayed press HISTORY repeatealy to view sea level pressure data for each of the last 24 hours 3 If no buttons are pressed for 5s the display automatically returns to Pressure and Weather Forecast Mode Viewing the Pressure Temperature Humidity Bar Charts The bar chart on the display can be configured to display the history data for sea level pressure temperature or humidity for channel 1 In Pressure and Weather Forecast Mode press and hold ALARM CHART to toggle the bar chart between e Sea level pressure PRESSURE should be displayed Temperature Thermometer icon and CH1 should be displayed e Humidity RH icon and CH1
14. gured location data This includes the longitude latitude time zone and DST Daylight Saving Time Choosing a suitable city code for your area will automatically generate the correct values for the location data Should you wish to input your own location data or if a suitable city code could not be found choose USR as the city code during setup A searching function is also available which allows the sunrise sunset times for different dates to be viewed 25 Accessing Sunrise Sunset Mode From the main console unit Press UP or DOWN until the sunrise and sunset icons on the lower left of the display start flashing Setting up the Location Data 1 In Sunrise Sunset Mode press and hold SET to enter location data setup 2 Thecity code in the Time and Alarm display should start flashing 3 Set City Info Press UP or DOWN to select city code for your local area The corresponding longitude and latitude will be shown along with the city Should you wish to input your own geographical coordinates choose USR as the city code Press SET to confirm your selection 4 f USR was chosen you will be asked to input your geographical coordinates oet Degree of Latitude Press UP or DOWN to adjust value Press and hold either button for fast advance Press SET to confirm your selection 5 Repeat above procedure to set minute of latitude degree of longitude minute of longitude time zone of the city and
15. ic Rainfall D LAST 24H Low battery icon Rain Rate Display for Rain sensor Rain Alert Rain Mode icon Cn 1 cC Wind Mode e Wind Chill e Temperature at place of anemometer e Wind direction e Wind speed e Wind gust e Alert for wind speed and wind gust speed Wind Chill Temperature Temperature at Wind Sensor Wind Direction Animate WIND cu ais Wind Mode icon u T Compass Display Low Battery icon for gn i l wind sensor DAILY MAX A LARM 1 H n Wind Direction in Compass Wind Speed Gust Max AVERAGE T Li m s Points Bearings Wind Speed Max Gust CMS M cw n Wind Alert Gust Alert GUST Using the Different Weather Modes Pressure and Weather Forecast Mode This part of the display indicates the current pressure sea level pressure weather forecast moon phase and pressure trend number of historical statistics can also be viewed such as the sea level pressure values for the last 24 hours moon phase for the previous and next 39 days as well as a pressure temperature humidity history bar chart Pressure values may be displayed inHg hPa mBar or mmHg and altitude values may be displayed in meters or feet Accessing Pressure and Weather Forecast Mode From the main console unit Press UP or DOWN until the weather forecast icon on the upper left of the display starts flashing NI in Setting Pressure Parameters during Initial S
16. is not enabled Disabling Entering Snooze when Time Alarms are Activated To Enter Snooze Press SNOOZE LIGHT to enable snooze function Note Alarm will automatically enter snooze mode if no key is pressed after the alarm sounds for 2 minutes This will occur for a maximum of three times To Disable Alarm s Press ALARM CHART to disable the alarm s Note For weekday alarm pressing ALARM CHART will only disable the alarm for the current day The alarm will be activated again the next day if it falls within Monday to Friday Activating Deactivating Radio Clock Reception The main console unit synchronizes the time and date with radio clock broadcasts to maintain atomic clock precision To turn this function on off 24 Press and hold UP If RC reception is activated a triangular tower icon will start flashing beside the clock icon If RC reception is deactivated the triangular tower icon will disappear Jeon 1 1 RC Reception Strength gt AC Undefined data Flashing Reception failed for 24 hours Weak signal but can be decoded Strong signal Note The radio controlled signal for time DCF 77 is transmitted from the central atomic clock in Frankfurt Main in short intervals It has a reception range of approx 1500 km Obstructions such as concrete walls can reduce the signal range Sunrise Sunset Mode The main console unit computes the sunrise and sunset times from the user confi
17. n Temperature and Humidity Mode each press of SET rotates temperature display between Temperature and Relative Humidity Dew Point Temperature and Relative Humidity Activating Deactivating the Temperature Alerts 1 In Temperature and Humidity Mode each press of ALARM CHART rotates channel temperature display between Current Temperature for corresponding channel Upper Temperature Alert displays OFF if deactivated A icon displayed Lower Temperature Alert displays OFF if deactivated V icon displayed 2 When the above alerts are displayed pressing UP or DOWN will activate deactivate the corresponding alert 28 Setting up the Temperature Alerts 1 In Temperature and Humidity Mode press ALARM CHART to select alarm which you wish to configure Press and hold ALARM CHART until channel temperature and Aor V icon starts flashing in the display 2 Set Value for Temperature Alert Press UP or DOWN to adjust value Press and hold either button for fast advance 3 Press ALARM CHART to confirm your selection 4 Upon completion the display will be returned to the temperature alert selection screen Disabling when Temperature Alarms are Activated To Disable Temperature Alarm s Press ALARM CHART to disable the alarm s Viewing the Max Min Channel Temperature and Humidity In Temperature and Humidity Mode each press of MEMORY MEN rotates channel temperature and humidity display between
18. nd Humidity Mode The weather station supports pairing with up to 5 remote thermo hygro sensors The temperature may is shown in degrees Celsius C The trend rising steady or falling of all values is also indicated on the display The main console unit uses the indoor temperature and humidity data to compute a comfort level rating of Wet Comfort or Dry A temperature alert function is available for each channel It can be programmed to sound if the channel temperature exceeds or falls below the pre configured upper and lower limits Note The temperature alerts have a 0 5 C hysteresis to prevent the alerts 27 from sounding constantly due to small fluctuations near the alert value This means that after the temperature reaches the alert value it will have to fall below the alert value plus the hysteresis to deactivate the alert Accessing Temperature and Humidity Mode From the main console unit Press UP or DOWN until the IN icon on the upper right of the display starts flashing Viewing Temperature and Humidity Display for each Channel For Static Display In Temperature and Humidity Mode each press of CHANNEL rotates display between different channels For Cycling Display To enable automatic rotating between different channel displays press and hold CHANNEL until the O icon is displayed Each valid channel will now be alternately displayed for 5s Rotating Between Temperature and Dew Point Display I
19. or corrosive materials They may scratch the plastic parts and corrode the electronic circuit 3 Do not subject the unit to excessive force shock dust temperature or humidity which may result in malfunction shorter electronic life span damaged battery and distorted parts 35 4 Do not tamper with the unit s internal components Doing so will invalidate the warranty on the unit and may cause unnecessary damage The unit contains no user serviceable parts 5 Only use fresh batteries as specified in the user s manual Do not mix new and old batteries as the old ones may leak 6 Always read the user s manual thoroughly before operating the unit DISCLAIMER The content of this manual is subject to change without further notice Due to printing limitation the displays shown in this manual may differ from the actual display The contents of this manual may not be reproduced without the permission of the manufacturer 36 Appendix City Codes US and Canadian Cities Zone DST City Code Offset fee wef fe CROIRE few esc e e femme m Dep CMOS COMORES fm os a 0 Zone City Code Offset DST een ue e Je me e ne n pem fe e LT ENUIENES fronte fe e mon Joel Je femme foe mem m pnl mre for some ow CROIRE femme oe 37 City Seattle Wash St Louis Mo Toronto Ont Can Tampa Fla Zone DST Code Offset leje SERIES City Vancouve
20. or securing unit to vertical surface Installing your weather station Setting up the Remote Weather Sensors To pair the remote sensors with the main console unit first connect the AC DC adaptor with the main console and press the ON button to power up Keep the sensors nearby The procedure for pairing a sensor to the main console is as follows 1 Press the link button on the main console 2 Insert the required batteries into the sensor within 30 seconds of pressing link 3 The red LED on the display will light up for a second indicating a successful paring Pair the sensors within line of sight of the console unit When pairing is complete mount the sensors on their designated location but always first test reception before permanently mounting your weather station Transmission range may be affected by trees metal structures and electronic appliances Setting up the Main Console Unit 1 Insert 2x AA size 1 5V batteries These serve as backup batteries only for when power is temporarily interrupted Always use the AC DC adapter as well 2 Connect the AC DC adaptor 3 If placing the console unit on a table or horizontal surface set up the table stand and you can put it on the table 4 If mounting the console unit on a wall or vertical surface remove the table stand and use the fitting provided Placement tips Make sure that the console unit is within receiving range of all remote senso
21. ory for sea level pressure for sea level pressure ALARM CHART Shows time alarms and alerts for temperature rain and wind Press and hold to enter alarm alert setup Press and hold in Pressure and Weather Forecast Mode to view different bar charts CHANNEL Changes temperature and humidity display to selected channel Press and hold to enable cycling display of paired thermometers Enters Snooze mode when alarm is activated LINK Used for pairing the sensors vvith the main console Navigating between Different Modes There are 6 modes available on the main console unit and each one displays a different category of data When display is in a certain mode its corresponding icon will start flashing To navigate between the different modes from the main console unit press UP to cycle through the modes in a clockwise direction or DOWN to cycle through the modes in an anti clockwise direction Pressure and Weather Forecast Mode NH 3 t ni da e Current pressure trend and history bar chart e Weather forecast e Moon phase TREND Po E e oe gt e Moon Phase E c Weather Forecast Pressure Trend History Bar chart for Ema to hiascia SEA LEVEL per T T Pressure Temperature orecast Mode icon E q Humidity 2mB hPo TES n f 3 HISTORY mm mm mm um 0 History selection for ws em Pressure and Moon Phase I IN ss Sy quu LE Emp x weed
22. r B C Can Washington D C Vancouver Canada Zone Code Offset DST LEERES 38 World Cities City City Time Time Code Zone Code Zone Addis Ababa Ethiopia Cairo Egypt Adelaide Australia Calcutta India as Kolkata Algiers Algeria Cape Town South Africa Amsterdam Netherlands Caracas Venezuela Ankara Turkey Chihuahua Mexico Asunci n Paraguay Copenhagen Denmark Athens Greece C rdoba Argentina Bangkok Thailand Dakar Senegal Barcelona Spain Dublin Ireland Beijing China Durban South Africa Belgrade Yugoslavia Frankfurt Germany Berlin Germany Glasgow Scotland Birmingham England Guatemala City Guatemala Bogot Colombia Hamburg Germany Bordeaux France Havana Cuba Bremen Germany Helsinki Finland Brisbane Australia Hong Kong China Buenos Aires NO NO Argentina BUA 3 Kingston Jamaica KIN 5 3 Zone Zone Kuala Lumpur NO NO Malaysia KUL Panama City Panama PTY 5 COMORES em qe Je e ven e ep eme qe pm mmm Im e Dm CCI nn Ten Poe bee e m fees e D Pn e D Joe sa SIP lei ee LS EN Nanjing Nanking NO China Tripoli Libya TRP 2 e e bm TITO 40 DST definition SA Australian DST SB South Brazilian DST Changes annually SC Chile DST SE Standard European DST SG Egypt DST SH Havana Cuba DST SI Iraq and Syria DST SK Irkutsk amp Moscow DST SM Montevideo Uruguay DST SN Namibia DST
23. rms can also be programmed 0 15 min Accessing Clock and Alarm Mode From the main console unit Press UP or DOWN until the clock icon beside the time date display starts flashing Setting up the Time Date and Language 1 In Clock and Alarm Mode press and hold SET to enter clock and calendar setup The day of week should start flashing in the display 2 Set Language Press UP or DOWN to select language for day of week English German French Italian Spanish or Dutch Press SET to confirm your selection 3 Select City Code Press UP or DOWN to select city code for your local area Press SET to confirm your selection 4 Set Daylight Saving Time Option Press UP or DOWN to turn DST option on or off Press and hold 22 either button for fast advance Press SET to confirm your selection Repeat the above instructions to set year month day calendar display format day month or month day time display format 12 hr 24 hr local hour and local minutes 5 Upon completion the display will return to normal Clock and Alarm Mode Note Press and hold SET anytime during the setup to return to normal Clock and Alarm Mode All settings made will be discarded Rotating between Different Clock Calendar Displays In Clock and Alarm Mode each press of SET rotates clock display between e Hour Minute Weekday e Hour Minute for UTC Coordinated Universal Time e Hour Minute City e Hour Minute
24. rs The console unit measures indoor temperature humidity pressure and receives signals from all remote sensors and radio clock broadcasts Avoid placing the console unit in the following areas Direct sunlight and surfaces which radiate and emit heat Near heating and ventilation devices such as heating ducts or air conditioners Areas with interference from wireless devices such as cordless phones radio headsets baby listening devices and electronic appliances Setting up the Thermo Hygro Sensor s 1 Open the latch at the base of the thermo hygro sensor 2 Press the link button on the main console 3 Insert 2 x AA size 1 5V batteries within 30 seconds 4 Replace the latch and mount unit at desired location Placement tips The thermo hygro sensor should be in an area with free air circulation and sheltered from direct sunlight and other extreme weather conditions Place the unit in a shaded area such as under a roof Use the wall mount and fittings provided if mounting the unit on a vertical surface Avoid placing the sensor near sources of heat such as chimneys Avoid any areas which collect and radiate heat in the sun such as metal brick or concrete structures paving patios and decks Ideally place the sensor above natural surfaces such as a grassy lawn The international standard height for measurements of air temperature is at 1 25m 4 ft above ground level Setting up th
25. s with a cotton tips or pipe cleaner e Look out for spiders or insects that might have crawled into the funnel e Also clean the swinging mechanism with a damp cloth 34 Troubleshooting The display shows 0 00 for weather parameter s The display will show 0 00 when the wireless link is lost with the remote sensor Check or replace the batteries for the corresponding sensor If the above does not solve the problem check the wireless transmission path from the corresponding sensor to the main console unit and change their locations if necessary Although wireless signals can pass through solid objects and walls the sensor should ideally be within the line of sight of the console unit The following may be the cause of reception problems Distance between remote sensor and main console unit too long Signal shielding materials such as metal surfaces concrete walls or dense vegetation in the path of transmission Interferences from wireless devices such as cordless phones radio headsets baby listening devices and electronic appliances The weather forecast is inaccurate The weather forecast is a prediction of weather after 12 24 hours and may not reflect current weather conditions PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully Here are a few precautions 1 Do not immerse the unit in water 2 Do not clean the unit with abrasive
26. smartwares Wireless Weather Station MEMORY CHANNEL Manual SHS 45000EU Table of contents Quick Start Procedure nn rene ses rrenen es rere mee ss eee ene nenne 3 IEF OQUICUOJ MR 4 FOAlUle Sar n rr mE 5 Contents of Complete Weather Station Kit 7 Installing your weather station sene sere sesesis 9 Setting up the Remote Weather Sensors 9 Setting up the Main Console Unit 9 Setting up the Thermo Hygro SEnSor S 10 setting up the Rain SENSON ase atus term deste ote AR en eu dnt 10 Setting up the Solar Powered Wind Meter 11 Using your Weather Station 1 eeeeeee eren 13 Navigating between Different Modes 14 Using the Different Weather Modes nenen nenen 18 Understanding the Weather Forecast Display 21 Main le NAM C Qi ve n n s ban 34 TROUDIC SHOQ LI NO at z a e ss a 35 APDENOI ienien a r d h RCE 37 Technical Specifications alal 42 Quick Start Procedure Installing your weather station is quick and easy 1 Insert batteries in the main console unit and power up the display with the adapter 2 Pairthe remote sensors thermometer wind meter rain meter with the main console wi
27. tart Up During the initial start up of the main console unit all functions in Pressure and Weather Forecast mode will be locked until the pressure settings are configured 1 Choose Pressure Units The unit icon inHg or mmHg or hPa mBar should be flashing Press UP or DOWN to select pressure unit as inHg hPa mBar or mmHg Press SET to confirm your selection 2 Choose Altitude Units Press UP or DOWN to select altitude unit as feet or meters Press SET to confirm your selection 3 Set Altitude Press UP or DOWN to adjust value Press and hold either button for fast advance Press SET to confirm your selection 4 Upon completion the display will be returned to Pressure and Weather Forecast Mode 18 Note After initial start up the altitude cannot be adjusted again until the main console unit is restarted Viewing Pressure and Altitude Data In Pressure and Weather Forecast Mode each press of SET rotates display between e Sea level pressure Local pressure e Local altitude Setting the Sea Level Pressure 5 In Pressure and Weather Forecast Mode press SET until the sea level pressure is displayed 6 Press and hold SET The Sea Level Pressure display should be flashing 7 Set Sea Level Pressure 8 Press UP or DOWN to adjust value Press and hold either button for fast advance Press SET to confirm your selection 10 Upon completion the display will be returned to Pr
28. th the following procedure a Open the battery case on the sensor Press the LINK button on the main console Insert the batteries in the sensor within 30 seconds The LINK led will blink for a second to indicate successful paring 3 Measurements from the remote sensors are now visible on the display 4 Mount the sensors on their designated location ooo Find more detailed instructions and information in the remainder of this manual Introduction Congratulations on your purchase of the Wireless Weather Station The weather station consists of a main console unit as well as an assortment of remote sensors which collect and transmit a wide range of weather data including outdoor temperature humidity wind speed and direction rain amount and rain rate With 868 Mhz technology you will experience a great wireless range and high reliability Main Console Unit The main console unit features a radio controlled atomic precision clock with alarm and weather forecast It measures indoor temperature and humidity and displays weather data collected by the remote weather sensors It also provides indication of the indoor outdoor temperature pressure and humidity trends and celestial information such as moon phase and sunrise set times Remote Weather Sensors The remote weather sensors include a thermo hygrometer anemometer wind sensor and rain sensor All data collected by the sensors is transmitted to the main console unit by wireless
29. titude longitude Remote temperate and relative humidity with trend indication Indoor and outdoor temperature and relative humidity display C or F Temperature and relative humidity trend indication Dew point display Max and Min memory for temperature and relative humidity Comfort level indicator Analyzes current environmental conditions Comfort Wet and Dry Rainfall measurement Records rainfall amount for the last hour last 24 hours last day last week and last month inch or mm Daily rainfall alert if rainfall for the current day exceed pre specified amount Wind Temperature at place of anemometer Temperature adjusted to wind chill factor C or F Wind direction compass display Wind direction angles available as compass points or bearings Average wind speed and gust speed mph m s knots and km h Daily Maximum wind speed and gust speed memory Wind speed alert for average wind speed and wind gust speed Contents of Complete Weather Station Kit Before installing your weather station please check that the following items are complete Hardware Components Fittings Main Console Unit AC DC 7 5V output adaptor Thermo Hygro Sensor Rain Sensor Funnel shaped Lid 4 screws with Battery Hatch for securing Sensor Base unit to Bucket See saw ground Mechanism Protective Screen Anemometer Wind Sensor Wind Cups Wind Vane Anemometer arm Anemometer base 4 screws f
30. to 99 5 within 25 80 1 around 47s 183s 33S 1min latitude within 50 16 positions 11 25 22 5 amph O to 199 9mph 42 Wind Speed Accuracy Wind Speed Starting Threshold Wind Gust Speed Disply Update Interval Wind Gust Sampling Interval 1h 24h yesterday Rainfall Range Last week last month Rainfall Range Temperature Sensing Cycle indoor Humidity Sensing Cycle indoor Power Main unit Remote Thermo Hygro unit Remote Anemometer unit Remote Rain gauge unit Weight Main unit 298g with build in battery Remote Thermo Hygro unit Remote Anemometer unit Remote Rain gauge unit Dimension Main unit Remote Thermo Hygro unit Remote Anemometer unit Remote Rain gauge unit 2mph 5 amph 33 seconds 11 seconds 0 0 to 1999 9 mm 78 73 inch O to 19999 mm 787 3 inch 10s 10s AC DC adaptor 5V use 2 pcs UM 3 or AA 1 5V battery use 2 pcs UM 3 or AA 1 5V battery use 2 pcs UM 3 or AA 1 5V battery 43g without battery 315g without battery 290g without battery 185 L x 140 H x 12 D m 37 5 L x 110 H x 23 D m 405 L x 375 H EDI 163 L x 177 H x 119 D m 43
31. wind flow and will attenuate readings e Aim for maximum exposure of the anemometer to the commonest wind directions in your area e The official mounting location for anemometers is 10m 33 ft above ground level in a clear unobstructed location wi Connecting with HomeWizard ANT Visit www homewizard com for more information HomeWizard is a device that easily lets you connect wireless smart home devices and control them from a smartphone or tablet with one easy to use app This weather station is HomeWizard compatible When connected with HomeWizard you will be able to view real time data in the HomeWizard app receive push notifications for weather conditions and share your own weather station online First make sure that all sensors are properly connected to the main console HomeWizard only synchronizes with the main console unit and gets all information of individual sensors from here 1 Start the HomeWizard app and select Menu Add sensor Weather Station 868 2 Select pair and press the LINK button on the main console Using your Weather Station Buttons UP Switches to next mode in anti clockwise direction Increment for setting parameters Decrement for setting parameters SET Rotates display for current mode Press and hold to enter setup or change units Confirmation for setting parameters Shows records for moon phase temperature O rain and wind HISTORY Shows Shows hist
32. wind direction in compass points e Temperature at anemometer wind direction in compass points e Temperature at anemometer wind direction in bearings Setting Units for Wind Speed Display km h mph m s or knots In Wind Mode press and hold SET to convert wind speed units between km h mph m s or knots 32 Viewing Wind Statistics In Wind Mode each press of MEMORY MEM rotates wind speed display between Current wind speed Daily maximum wind speed DAILY MAX is displayed Gust speed GUST is displayed Daily maximum gust speed GUST DAILY MAX is displayed Resetting the Wind Statistics Memory In Wind Mode press and hold MEMORY MEM to reset all wind statistics Activating Deactivating Wind Alerts 1 In Wind Mode each press of ALARM CHART rotates wind speed display between e Current wind speed e Wind speed alert ALARM HI displayed e Gust alert GUST ALARM HI displayed If the alert is deactivated OFF will be shown otherwise the alert value is shown 2 When a wind alert is displayed pressing UP or DOWN will activate deactivate it Setting up the Wind Alerts 1 In Wind Mode press ALARM CHART to select alarm which you wish to configure 2 Press and hold ALARM CHART until alert and corresponding icon starts flashing in the display 3 Set Value for Alert Press UP or DOWN to adjust value Press and hold either button for fast
Download Pdf Manuals
Related Search