Home

Visio-p8Ufm Owner Manual eng.vsd

image

Contents

1. chirp 1 flash and the LED lights will turn off REMOTE ENGINE STARTER amp ALARM DIAGNOSTIC Diagnostic for Alarm When the alarm is triggered the system will keep in memory the last event This chart will help you find out which defective zone has triggered the system First the system must be disarmed by pressing the unlock button Leave the hood open then depress the brake pedal count the number of flashes from the parking lights to locate the issue To repeat the flashes depress brake pedal again Diagnostic for Remote Starter Each time you try to remote start and the vehicle doesn t start the parking lights will flash to indicate the diagnostic of the system Please refer to this chart and locate the issues You can also get the diagnostic code by opening the hood with the system disarmed 10 Flashes Hand brake not pulled manual transmission only 11 Flashes Door is opened manual transmission only 12 Flashes Ignition is ON when remote start WARRANTY The manufacturer guarantees to the purchaser of origin the remote starter and alarm to be free of defect material and labour However if it is proven that the product is defective inside the two year period as from the original date of purchase the manufacturer will repair or replace without expenses towards the purchaser any part excluding any expenses incurred to deliver the product to the manufacturer remote starter or alarm which the manufacturer consider
2. OWNER S MANUAL P8U FM mega gt a A A vol M W 7 di dar FEATURES OPERA REMOTE STARTER ANTI START SYSTEM SECURITY SYSTEM o x 7 wee ot TRANSMITTER OPERATIONS SSS Audible enable confirmation 1 chirp 1 or 3 flashes dome light delay AE EOCENE Deore Audible disable confirmation 1 or 3 flashes dome light delay Audible enable confirmation 2 chirps 2 flashes Audible disable confirmation 2 flashes Start Stop the Engine Start and stop the remote starter Enable or disable the audible function See note 1 Enable Disable audible Enable confirmation 1 chirp 1 flash Disable confirmation 2 flashes Activation of panique mode See note 2 Loj Note the engine should not be running Valet Mode The system temporary ignore the passive arming mode porary See note 3 Disarm amp Unlock the Doors 7 The engine will start every 3 hours Enable or disable the shock sensor See note 5 Enable confirmation 1 chirp 1 flash Disable confirmation 2 flashes sec Auxiliary 1 Confirmation 1 or 6 flashes depending the programmati 2 sec Auxiliary 2 Confirmation 1 or 5 flashes depending the programmati Auxiliary 3 Confirmation 1 or 4 flashes depending the programmati Allows to release the trunk 2 sec Tr nK O
3. gine is running with the key in the ignition and the system is not in valet mode Make sure the hood is closed and do not press on the brake pedal 2 Press on the start button The parking lights will flash once and stay ON to confirm this mode 3 Remove the key from the ignition The engine should keep on running 4 Exit the vehicle close and lock all doors The engine should keep on running for 3 6 12 or 24 minutes depending on setting Manual vehicle 1 You are seated in the vehicle the engine is running with the ignition key and the system is not in valet mode Make sure all doors hood and windows are closed Place the gear shifter in NEUTRAL position Set the emergency brake hand brake Release the brake pedal If the option 14 Automatic Sequence is enable go to step 6 Press on the start button The parking lights will flash once and stay ON Remove the key from the ignition The engine should keep on running Open the door s and exit the vehicle During the door s is are opened press on the start button E3 Close and lock all doors The engine should keep on running for 3 6 12 or 24 minutes depending on setting DO gt W FEATURES AND OPERATIONS Deactivate the Starter Kill and Alarm Permanently VALET Mode The valet mode allows you to deactivate alarm and starter kill and allows anyone to start and drive the vehicle with the key in the ignition In valet mode lock unlock and remote tru
4. ion 1 bip 1 flash If enabled press 2 times quickly again on the auxiliary button to disable this option confirmation 2 flashes FEATURES AND OPERATIONS Remote starter with MANUAL transmission For safety you must perform an Exit Sequence to be able to start the engine by remote later The following steps must be performed 1 You are seated in the vehicle the engine is running with the key in the ignition and the system is not in valet mode Make sure all doors the hood and the windows are closed Place the gear shifter in NEUTRAL position Set the emergency brake hand brake Release the brake pedal If the option 14 Automatic Sequence is enable go to step 6 Press on start button The parking lights will flash once and stay ON Remove the key from the ignition The engine should keep on running Open the door s and exit the vehicle The engine will automatically shut down seconds after the last door is closed The system is now ready to start by the remote Exit Sequence Activated CON DM gt W Note Opening any door or the hood after the Exit Sequence is activated will cancel it If you try to start the engine by the remote the parking lights will flash 8 times and the engine will not start In that case you must perform the Exit Sequence again FEATURES AND OPERATIONS Remote Engine Starter To press on the start button will activate the remote engine starter Par
5. king lights will turn ON for 2 seconds the engine will start 6 seconds later Parking lights will stay ON as long as the engine is running 3 6 12 or 24 minutes depending on setting If the engine does not start the system will try a second time If after the second try the engine refuses to start the system will shut down completely You may be experiencing a mechanical problem To turn the engine off while the engine is running press on start button again Arming and Lock the doors To the system will also enable the starter kill and lock the doors if installed If you try to arm the system and you ll hear 4 hood 5 doors or 6 trunk chirps one of the protected zones is opened The system will ignore the defective zone and force the system to arm Consult your installer to verify your system Disarming and Unlock the doors To disarm the system will also disable the starter kill and unlock the doors if installed If you hear 5 chirps when you disarm the system it means that the alarm has been triggered while you were away Passive Arming If option 13 is set to Passive Arming the system will arm automatically 30 seconds after the last door is closed FEATURES AND OPERATIONS Keyless Running Mode The keyless running mode allows to keep the engine running without the key in the ignition To activate this mode the following steps must be performed Automatic Vehicle 1 You are seated in the vehicle the en
6. nd you don t want the system arm by itself To activate the temporary valet mode the following steps must be performed 1 Disarm the system by pressing the unlock button 2 Press 2 times quickly on the unlock button parking lights will flash 5 times to confirm the entry to this mode By pressing on lock or unlock button you will cancel this function 3 FEATURES AND OPERATIONS Note 4 Night Timer Mode This mode is practical when a very cold night is forecasted The engine will start every 3 hours for a period of 3 minutes 4 times maximum To activate this mode the following steps must be performed 1 The engine should not be running and the system should not be in valet mode 2 Press 2 times quickly on the start button The parking lights will flash 4 times to confirm the entry to this mode This mode is deactivated if the vehicle is started by the key or the remote Note 5 Enable Disable The Shock Sensor Disabling the shock sensor could be useful when the sensor is defect or you re in an area with a lot of vibration This mode allows you to disable the shock sensor to avoid the alarm to trigger for nothing To enable or disable this mode the following steps must be performed 1 Disarm the system by pressing on the unlock button 2 Turn the ignition key to ON position engine is not running 3 If disabled press 2 times quickly on the auxiliary button to enable this option confirmat
7. nk release are still functional Remote car starter and the alarm are not functional This may be pratical in the following cases e You have lost the remote e The remote s battery is empty e You leave your vehicle to be serviced e You leave your vehicle to a valet service To enable the valet mode there are 2 procedures Procedure A 1 Turn the ignition key to ON position engine is not running You have to perform the step 2 within 15 seconds If 15 seconds is expired turn the ignition key OFF and redo this operation 2 Depress 4 times the brake pedal within 15 seconds after the ignition key is turned to ON The LED lights on the antenna will stay ON confirming that the system is in permanently valet mode 2 chirps 2 flashes Procedure B 1 Turn the ignition key to ON position engine is not running You have to perform the step 2 within 15 seconds If 15 seconds is expired turn the ignition key OFF and redo this operation 2 Press and hold the button found on the antenna for 3 seconds The LED lights on the antenna will stay ON confirming that the system is in permanently valet mode 2 chirps 2 flashes Note In the permanently valet mode the starter kill function is deactivated You cannot start your vehicle by remote If you press on start button the parking lights will flash 2 times and the engine will not start To cancel the permanently valet mode repeat steps 1 and 2 This time the confirmation will be 1
8. o a violation of this or any other guarantee express or implicit This guarantee gives you specific statutory duties These rights vary according to the area in which you reside CERTAIN DAMAGE IS EXCLUDED The manufacturer declines any responsibility for additional damage caused by the product including a financial loss loss of use of the product hiring of vehicle or all other expenses connected to the maintenance and the guard of the product The manufacturer declines any responsibility for any additional damage caused by the product or resulting from his use including the expenses of repair or replacement of other goods damaged or caused by his use even if the product functions correctly This product is designed to dissuade from an unauthorized use of the vehicles in which it is installed The manufacturer does not guarantee that the product is proof against loss and vandalism and the human error or an inadequate use The manufacturer does not accept any responsibility for any damage occurring any kind that it is caused by a vehicle in which the product is installed or resulting from damage from its use The manufacturer does not accept any responsibility for any damage resulting from the loss of the vehicle or its contents caused or claimed caused directly or indirectly by a failure of the product STARTER WITH MANUAL SHIFT the installation of a remote starter MUST be carried out with an indicated manual transmission remote starter It is the
9. pener Confirmati or 3 flashes depending the programmati Enable Disable The Shock Sensor FEATURES AND OPERATIONS Note 1 Enable Disable Audible When the audible option is enabled the system will chirp each time the system is armed or disarmed by the remote To enable this option the following steps must be performed 1 Disarm the system by pressing the unlock button 2 Turn the ignition key to ON position engine is not running 3 If disabled press once on the auxiliary button to enable this option confirmation 1 chirp 1 flash If enabled press once again on the auxiliary button to disable this option confirmation 2 flashes Note 2 Panic Mode The panic mode allows you to activate the horn or siren for a period of 30 seconds to scare away anyone prowling around your vehicle In some instances it may also be used as a car finder To activate this option the following steps must be performed 1 The engine should not be running 2 Press 2 times quickly on the lock button You will hear the horn or siren be triggered To deactivate the panic mode press on any button will deactivate the panic mode and execute the button function Note 3 Temporary Valet Mode When the temporary valet mode is activated the system will ignore the passive arming mode see the definition of passive arming at page 6 It may be useful when you fill up some gaz or work on your vehicle a
10. s defective After the initial warranty period of 2 years the manufacturer must repair or replace the defective products with a forwarding costs of 30 00 US All the guarantees apply to the original purchaser and ONLY to the vehicle in which it is initially installed Repairs or replacement of the defective modules must remain at the discretion of the manufacturer All the other parts components accessories or optional equipment relating to the remote starter and alarm are not included in the guarantee of the manufacturer This guarantee is nontransferable The original receipt must accompany a request for guarantee of service of any authorized retailer in factory The fact of not conforming to these conditions can result in cancellation of the guarantee This guarantee does not cover the following elements expenses for labour of removal or reinstallation transport charges abuse misuse or accidental damage of the remote starter and the alarm or parts of the latter This guarantee is cancelled in the event of amendments repairs or deteriorations of any part of the product The manufacturer does not guarantee or does not insure against the loss of the vehicle or its contents The models of alarm are used only as dissuasion against any possible loss This alarm can be considered for a reduction of the insurances premiums please contact your insurance agent for more details The manufacturer should not be held responsible for any consequent damage connected t
11. sole responsibility of the operator of the vehicle to make sure that the vehicle is left with the transmission in neutral when the remote starter is used The manual transmission remote starter is designed as supplementary measure of safety ONLY The manufacturer does not guarantee or does not insure against any damage or loss of life which can result from remote starting the remote starter when the vehicle is in gear The models for manual transmission are only designed to act as a preventive measure against starting in gear it remains the sole responsibility of the operator or the owner of the vehicle to make sure the transmission is in neutral 10

Download Pdf Manuals

image

Related Search

Related Contents

Especificaciones del Saffire PRO 26  e2v Electrochemical and Pellistor Gas Sensor  Metcal DX-250 / 255 Precision Dispensers - E  Mode d`emploi Balance plate-forme  Philips AZ1310 User's Manual  HX3 User's Guide - Honeywell Scanning and Mobility  Untitled  Tetrax XWAY  

Copyright © All rights reserved.
Failed to retrieve file