NVL-3MP4012D/IR - Astal Security Technologies
Contents
1. Holding Sp z 0 0 5 NOVUS 2013 04 03 JM M K2. 4 To remove oil from the lens wipe water drops or oil off the lens with a clean soft cloth and then dry the lens surface Then prepare oil free and washed out cotton cloth or lens cleaning paper with either alcohol or lens cleaning liquid Wipe the rest of the dirt off gently with cloth or paper by moving spirally from the lens center towards its rim Repeat wiping with another wet cloth or paper until the lens becomes completely clean In case of lens cleaning please do not use any solving liquids for example petrol All rights reserved AAT Holding Sp z 0 0 3 NVL 3MP4012D IR user s manual ver 1 0 TECHNICAL SPECIFICATION 1 TECHNICAL SPECIFICATION a Designed for mega pixel cameras Glass made optics Adapted to IR operation Focal Lenght 4 0 12mm Iris Operation Auto 64 2 L x 46 H x 37 6 W z 3 N 2 m 8 f Z A lix A Drive CAERE is A u 64 2 125 A A 200 10 d Tolerance 0 4mm All rights reserved AAT Holding Sp z 0 0 4 NVL 3MP4012D IR user s manual ver 1 0 INSTALLATION 2 INSTALLATION l Remove the caps protecting the lenses If needed please remove the dust from the lenses 2 Mount the lens onto camera by turning it gently clockwise stop when you feel slight resistance 3 Connect the lens cable to the lens connector 4 Connect the camera to the monitor and adjust the angle of view and focus All rights reserved AAT
3. ad all the safety and operating instructions before starting the device 2 Please keep this manual for the lifespan of the device in case referring to the contents of this manual is necessary 3 All the safety precautions referred to in this manual should be strictly followed as they have a direct influence on user s safety and durability and reliability of the device 4 All actions conducted by the servicemen and users must be accomplished in accordance with the user s manual 5 Usage of additional devices and components neither provided nor recommended by the producer is forbidden 6 Cables should be placed in a way excluding the possibility of damaging them by accident 7 User cannot repair or upgrade the equipment himself All maintenance actions and repairs should be conducted only by qualified service personnel 8 In necessity of repairs attention to using only original replacement parts with their parameters in accordance with those specified by the producer should be paid Non licensed service and non genuine replacement parts may cause fire or electrocution 9 After maintenance activities tests should be run to ensure proper operation of all the functional components of the device 10 Prior to lens mounting procedure please ensure that camera 1s powered off 11 CS type lens are not compatible with C type lens mounts 12 Due to risk of fire do not expose the lens to the direct sunlight 13 Do not touch the lens 1
4. d the product tested according to RoHS Directive 2002 95 EC Concerning for human health protection and friendly environment we assure that our products falling under RoHS Directive regulations regarding the restriction of the use of hazardous substances in electrical and electronic equipment were designed and manufactured in compliance with mentioned regulation Simultaneously we claim that our products were tested and do not contain hazardous substances exceeding limits which could have negative impact on human health or natural environment Information The device as a part of professional CCTV system used for surveillance and control is not designed for self installation in households by individuals without technical knowledge The manufacturer is not responsible for defects and damages resulted from improper or inconsistent with user s manual installation of the device in the system All rights reserved AAT Holding Sp z 0 0 2 NVL 3MP4012D IR user s manual ver 1 0 SAFETY REQUIREMENTS ATTENTION GIVEN PRODUCT IN ITS USER S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT OR THAT ARISES FROM THE NORMAL APPLICATION OF THE PRODUCT ITS MANUFACTURER MUST BE CONTACTED OR THE RESPONSIBILITY OF THE MANUFACTURER FOR THE RESULTS OF SUCH AN ACTION SHELL BE EXCLUDED PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT PROVISIONED FOR THE 1 l Prior to undertaking any action please consult the following manual and re
5. user s manual NVL 3MP4012D IR NVL 3MP4012D IR user s manual ver 1 0 INFORMATION EMC 2004 108 EC and LVD 2006 95 EC Directives C CE Marking Our products are manufactured to comply with requirements of following directives and national regulations implementing the directives e Electromagnetic compatibility EMC 2004 108 EC e Low voltage LVD 2006 95 EC with further amendment The Directive applies to electrical equipment designed for use with a voltage rating of between SOVAC and 1000VAC as well as 75VDC and 1500VDC WEEE Directive 2002 96 EC x Information on Disposal for Users of Waste Electrical and Electronic Equipment This appliance s marked according to the European Directive on Waste Electrical and Electronic Equipment 2002 96 EC and further amendments By ensuring this product is disposed of correctly you will help to prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol on the product or the documents accompanying the product indicates that this appliance may not be treated as household waste It shall be handed over to the applicable collection point for the waste electrical and electronic equipment for recycling purpose For more information about recycling of this product please contact your local authorities your household waste disposal service or the shop where you purchase
Download Pdf Manuals
Related Search