STAND-UP LIFT: MAXXI UP 300
Contents
1. NAUSICAA Medical www nausicaa medical eu STAND UP LIFT MAXXI UP 300 MADE FROM ALUMINIUM WEIGHT CAPACITY 300 kg CLASS 1 MEDICAL DEVICE CONFORM TO STANDARD NF EN ISO 10535 2007 User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer V0212 14 MAXXIU P 300 User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Contents User Manual Stand Up Lift MAXXI UP 300 Assembling Instructions EE 2 3 e Preventive Maintenance amp Security Controls 10 General Safety ICS e Technicals Dimensionals Characteristics 7 Spare PAS 8 Cleaning amp Maintenance 2 e Motorization Technicals Characteristics ccc 10 11 e Troubleshooting Guide ooo ccc 12 Warranty nee 2 User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Assembling Instructions BEFORE USING YOUR STAND UP LIFT IT IS NECESSARY TO CHECK e The wheels turn and roll normally e The rear wheels function correctly e There is no Wear or deformation on the hooks WARNING e To preserve the inserts do not overtighten e Assembly is done with the brakes locked Step 1 You have to find an item in the box Your st2. 13 Ensure that no moisture enters the electrical system 14 Avoid mechanical stress on electrical cords Pull bend or crush the cords may damage them 15 Charge batteries in a well ventilated area 16 Electromagnetic interferences can not be excluded from the Stand Up Lift and other devices If there is a risk of such interference the source of interference must be removed or the Stand Up Lift should not be used 17 Disruptions caused by the use of portable communication devices can not be completely excluded This is why a safe distance of at least 3 meters must be kept in order to ensure the functioning of the Stand Up Lift safely 18 Do not leave unattended children stand near the Stand Up Lift 19 The Stand Up Lift should not be used as soon as abnormal noises damages or any other malfunctions occur In this case do not connect the wall charger to the Stand Up Lift and inform us 20 If damaged or defective the Stand Up Lift should not be used and should not be connected to the direct current Inform the dealer to remedy the default or failure User Manual Stand Up Lift MAXXI UP 300 6 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Technicals amp Dimensionals Characteristics Frame made in aluminium e Laser cutting and bending sheet metal tubes and profiles e Epoxy baked painting Ball bearing castors C e Total weight 38 kg e Weight capacity 300 kg e Life
3. installation and or use in a non compliant way with technical standards and safety in case the unit would work in a country other than the country of origin and or if the electrical power is not suited for the ope rating voltage of the device a lack of routine maintenance e Article 5 The distributor may not invoke the benefit of the warranty if the device serial number has been removed altered or rendered illegible if the device under warranty has been modified without the approval of NAUSICAA M dical S A e Article 6 During the repair of any defective equipment no loan will be made e Article 7 All warranty claims must be exercised through the distributor e Article 8 Sending spare parts under warranty will be made after consultation with the distributor customer service e Article 9 Defective parts changed under or out of warranty will be guaranteed for 6 months from the date of repair or sending of the spare parts e Article 10 No distributor can unilaterally change the terms of this warranty User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer 13 NAUSICAA Medical CONTACT Phone 33 0 466 17 184 Fax 33 0 466 532 305 Email export nausicaa medical com Website www nausicaa medical eu Manufactured by NAUSICAA M dical S A 12 all e du Piot ZA P le Actif 30660 GALLARGUES LE MONTUEUX FRANCE
4. the 2 buttons at the same time The indication of the number of cycles performed is indicated by the digits the indication remains displayed for about 3 seconds lf no digit is displayed the number of cycles performed is less than 150 000 sec If one digit appears the jack has been used for 150 000 sec or 25 of the maximum time If 2 digit appear the actuator was used for 300 000 sec or 50 of the maximum time If 3 digits appear the actuator was used for 450 000 sec or 75 of the maximum time If 4 digits appear the actuator was used for 600 000 sec or 100 of his time and the maximum box no longer work This counter work with time and not cycle because usual cycles counter count when you push on a remote control button The problem with this type of counter is when you push 5 times on one cycle It ll count 5 cycles The time counter is more accurate and after 10 000 full cycles the actuator need to be checked by the manufacturer After 10 000 complete cycles a key appears on the screen and the actuator must be checked C Lo be fap Coat Overload protection system e If you attempt to lift a person weighing beyond the maximum limit of the device an anvil with kg written will appear asking you to immediately relieve the unit because it is a non conform use Preservation system of the actuator e An integrated system for maintaining the actuator is included in the control box It corresponds to a ratio between the opera
5. using an apropriate detergent e A regular cleaning is recommanded WARNING e The detergents used must have a neutral pH e Avoid the abrasive products and solvent they could damage the device surface state DAILY MAINTENANCE e By means of a product applied on the surface in one operation e After the patient s discharge by respecting the following operation Cleaning is carried out by means of a cloth impregnated with a disinfectant solution surface Maintenance by specific service providers after removal of the stand up lift from the facility Operation biological cleaning Steam cleaning of various flat surfaces Change surfaces regularly when washing to avoid water load Steam clea ning of inaccessible areas For tubes steam use with a microfiber mop Do not direct steam directly on the electrical boxes CAUTION e Disinfection of actuators electrical boxes and handsets with a microfiber cloth impregnated with disinfectant MONTHLY MAINTENANCE e Check that the device does not present any visible damages e Check that no part is missing e Check the good functioning of the castors and that no matter prevents their bearing e Check the good fonctioning of the commands as well as the connections of the remote control and the actuator on the battery e Clean the sockets and the commands buttons with a dry cloth if needed with a wet cloth e Check the good state of the electric cables User Manual Stan
6. AXXIUP 300 MU EP ELEC SYSTEME D ECARTEMENT DES PIEDS pour MAXXIUP 300 ROTULES BIELETTES sans v rin WP RJNFRD100 ROUE JUMELEE NOIRE A FREIN ROUGE DIAMETRE 100mm roulement billes WP RJND100 ROUE JUMELEE NOIRE DIAMETRE 100mm roulement billes WP BPGA9006 BOMBE DE PEINTURE GRIS ALUMINIUM 9006 WP BPBA BOMBE DE PEINTURE BLEU ATLANTE MOTORISATION Vo LCPLECP TELECOMMANDE 4 FONCTIONS UMEC VB VS CRTL CROCHET DE TELECOMMANDE UMEC VB VSTLCM ECP FA FACADE ADHESIVE DE TELECOMMANDE 4 FONCTIONS VS BCAM CARTOUCHE AMOVIBLE DE BATTERIE UMEC VB avec 2 batteries 5A 12V avec quilibrage et affichage de charge F3 BT2IN JEU DE BATTERIES INTERNES 5A 12V VS BCAM KCRT KIT DE 2 CARTES Equilibrage et affichage pour cartouche batterie UMEC VB VS BCAM VS BCAM KCFC KIT DE CONNEXION AVEC FUSIBLES pour cartouche batterie VS BCAM O VS BCAM SMP VS BCAM CAR CARTER COMPLET CARTOUCHE BATTERIE UMEC VB VS BCAM FAE FACADE ADHESIVE ECRAN CARTOUCHE BATTERIE VS BCAM VS BCAM CR CROCHET D ATTACHE CARTOUCHE BATTERIE VSBCC ECP BOITIER DE CONTR LE UMEC VB 4 FONCTIONS sans cartouche batterie VS BCCCEC CARTE DE COMMANDE AVEC CHARGEUR POUR BOITIER DE CONTR LE UMEC VB 2 ET 4 FONCTIONS VS BCC BA ECP CARTE DE COMMANDE AVEC AFFICHEUR POUR BOITIER DE CONTROLE UMEC VB 4 FONCTIONS VS KCNF KIT CONNEXION ET FUSIBLE POUR CARTE DE COMMANDE VS BCC CCC VS BAUR BOUTON D ARRET D URGENCE UMEC VB COMPLET VS BCA BOUCHON DE PRISE SECTEUR BOITIER DE CONTR LE UMEC VB VS CR
7. D CORDON SECTEUR UMEC VB VS ERL CROCHET D ENROULEUR DE CORDON SECTEUR UMEC VB VSVRN FSM10 VERIN UMEC 10000 N COURSE 290mm VS VRN CHT CHAPE DE TETE DE VERINS AVEC DESCENTE D URGENCE tous mod les VS VRN 10 CEMB CHAPE EMBASE DE VERIN DE LEVAGE 10000N tous mod les VS VRN 10 CAR CARTER PLASTIQUE POUR VERIN 10000N tous mod les VS VRN KBPR KIT 2 BOUTONS POUSSOIR ROUGE DESCENTE D URGENCE MECANIQUE DE VERIN tous mod les VS VRN DM CAR CAPOT PLASTIQUE GRIS DESCENTE D URGENCE MECANIQUE DE V RIN tous mod les VS VRN DM CHAPE DE T TE DE V RINS AVEC DESCENTE D URGENCE tous mod les VS VRN 10 CRD CORDON SPIRALE POUR V RIN 10000N tous mod les VSVRN ALECP VERIN UMEC 3000N NOIR POUR ECARTEMENT DES PIEDS VS CMB CHARGEUR MURAL POUR CARTOUCHE BATTERIE UMEC VB User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Cleaning amp Maintenance BEFORE ANY HANDLING e Disconnect the AC power cord e Check that all electrical components are connected to each other e Clean electrical enclosures of the actuators and of the handsets if they have been soiled by body fluids especially urine OBJECTIVE e Repair the stand up lift and prevent the transmission of germs from one patient to another e Remove any organic soil by mechanical action cleansing or chemical action disinfection CLEANING PROCESS e Clean the surfaces with a wet cloth by
8. and Up Lift only after being trained for its handling 5 Before using the device please read the complete User Manual in order to avoid damage due to improper handling or exposure to risks The User Manual contains important information and notes required for the Stand Up Lift use 6 Use the Stand Up Lift in accordance with this User Manual only Keep the User Manual for future reference in case of questions Join this User Manual to the Stand Up Lift in case of change of ownership 7 Before any use it must be ascertained whether the Stand Up Lift and its accessories are in working order and in impeccable conditions 8 Before using the Stand Up Lift with other medical and non medical devices check that the combination of these products is allowed and can be used together safely 9 Assembly commissioning maintenance and repair of the Stand Up Lift should be entrusted only to specialists 10 It is up to the user or operator to ensure through adequate measures and instructions that mechanical stress of the charging cord through bending tension shear crushing is excluded during loading or cleaning of the part This also applies to the electrical cables of other devices used with the Stand Up Lift 11 Respect the activation duration and the maximum weight capacity These values must not be exceeded otherwise the Stand Up Lift safe operation is no longer guaranteed 12 Do not expose the Stand Up Lift to direct sunlight or heat
9. ander is ready for use User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Assembling Instructions User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Preventive Maintenance amp Security Controls Stand Up Lift MAXXI UP 300 Serial Number Control of security points Frequency depending on use recommended every three months This is a sight control any wear trace must lead to a replacement GOOD WRONG DATE OF CHANGE Connection head of the actuator bolted Connection base of the actuator bolted cata te bat cases te me PP Fring ofthecestors pated Siig ofthe sb por support odustao State and sticking ofthe ontisipmoterl Fring ofthe P vera stote tte device OO ON WN KR WN Control of electrical functions Frequency depending on use at least once a year this control must be carried out when the hoist is loaded GOOD WRONG us OF CHANGE Operation of the actuator i Operation of the emergency system Batteries status charge holding Inspection carried out on Inspection carried out by Date of the next inspection User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Preventive Maintenance Security C
10. d Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer 9 Motorization Technicals Characteristics e Removable battery pack e Digital display of the autonomy Emergency stop Electrical security lowering system Wall charger in option e Remote control 4 functions Protection class IPX4 Conform to Standard EN 60601 1 amp EN 60601 2 38 e Manufactured according to Standard DIN VDE 0700t238 1983 DC motor low voltage 24V e 24V NOVA power e Maximum strength 10 000 N e Lifting stroke 29 cm e Electronic protection when overloaded e Protection class Il e Protection type IPX 4 e Stop limit switch Box in ABS e Handcontrol with spiral cable low voltage 24V e Protection against overloading through thermo switch e Loudness less than 55dB at a distance of 1 meter e Electromagnetic compatibility conforms to EN 60601 1 2 A CE Device class Battery Charging Diagram User Manual Stand Up Lift MAXXI UP 300 10 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Motorization Technicals Characteristics Cycle counter We have a time counter of 600 000 sec If we consider that the actuator makes full strokes at an average speed of 9 mm s that represents approximately 10 000 full cycles To check the number of cycles already performed you must use the remote control 2 buttons Press
11. e are damages on the actuator or on the control box Grease the mobile parts 1 Load the device 2 Plug the actuator jack 3 The actuator has to be repaired 4 The entire electric system has to be checked The actuator does not work and the user does not hear a click in the control box when the remote control button is pushed 1 Emergency button is activated 2 There is no contact between the battery and the control box 3 Batteries are unloaded 4 The remote control jack is not plugged 5 The remote control jack is deteriorated 6 There are damages on the remote control or on the control box 1 Turn the button to unlock the device 2 Take off the battery and put it back 3 Check the charging cord 4 Plug the remote control 5 Change the remote control 6 The entire electric system has to be checked The actuator stops when lifting 1 Batteries are unloaded sound system low battery written on the screen 2 The product has been used for too long 3 The weight lifted is too heavy 1 Check the charging cord then load battery 2 Let the device rest a moment as a protection for the actuator lifespan 3 Reduce the weight lifted The actuator does not work at all 1 The control box is broken down 2 The remote control is broken down 1 The control box has to be changed 2 The remote control has to be changed User Manual Stand Up Li
12. ft MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Warranty e Article 1 NAUSICAA M dical S A warrants this product against any defects in manufacturing and assem bly of mechanical and electronic components This warranty is for devices used only in accordance with NAUSICAA M dical S A terms of use The warranty covers all mechanical and electrical parts except battery and breakage This warranty whose terms of use are defined below is valid for 60 months from the date of first departure from NAUSICAA M dical S A Article 2 The warranty entitles the free labor and the free replacement of defective parts e Article 3 The original out going shipping costs of the device and all associated costs are the responsibility of the distributor The goods always travel at the risk and the responsibility of the distributor Under warranty return costs after intervention will be borne by NAUSICAA M dical S A Out of warranty return costs are at the expense of the distributor whether or not he accepts the repair estimate Article 4 The warranty does not apply if the claims are consecutive to accident misuse or neglect of the unit by the end customer shipping performed without adequate protection alteration or transformation not validated by NAUSICAA M dical S A the impact of external elements natural disaster fire shock humidity flood lightning
13. ontrols Control of security points Frequency depending on use recommended every three months This is a sight control any wear trace must lead to a replacement 1 Connection head of the actuator bolted 2 Connection base of the actuator bolted 3 Connection head of the mast bolted 4 Locking base of the mast 5 gt Fixing of the castors bolted 6 Sliding of the sub patellar support adjustable knob 7 State and sticking of the anti slip material 8 gt Fixing of the mast handle 9 OVERALL STATE OF THE DEVICE WELDS JOINTS OXIDATION THESE CONTROLS CAN BE CARRIED OUT WITHOUT LOAD Periodical Greasing Ju WARNING DO NOT USE THE DEVICE WITHOUT THE SHIN BLOCK User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer General Safety Guidelines 1 Use the Stand Up Lift only for its intended purpose in accordance with the legislation for medical devices the regulations for labor protection and accident prevention as well as the generally recognized rules of technology 2 Note that the Stand Up Lift is a medical device therefore the user is required to comply with the directive on the use of medical devices 3 The requirements for the electrical installation of the room or area where the Stand Up Lift is used must meet the current state of the technology 4 Using the St
14. span 8 years except electrical parts SCP Suspention central point Dimensions en mm 1 Highest Position Maximal Reach Position Minimal Reach Position I a Maximal Reach at 600 mm 540 b Maximal Reach at the Base 480 Maximal Height of the SCP 1490 d Minimal Height of the SCP 780 6 Lifting Lenght 710 Maximal Internal Width 990 Q Internal Width at the Maximal Reach 340 Minimal internal Width 670 Minimal Distance from Floor 30 Base Height 110 k Minimal Distance Between the Wall and the 470 SCP at its Maximal Height Minimal Distance Between the Wall and the 240 SCP at tts Maximal Reach Minimal Distance Between the Wall and the on SCP at its Maximal Height 190 Maximal Diameter 1300 SCP Suspension central point User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer Spare Parts REFERENCES DENOMINATIONS FRAME MU BRS BRAS DE LEVAGE DE MAXXIUP 300 MU CTB SUPPORT DE CALE TIBIA DE UP 300 SANS MOUSSE D APPUI SOUS ROTULIEN MU MASR MOUSSE D APPUI SOUS ROTULIEN POUR MAXXIUP 300 MU RP3F PIED GAUCHE DE MAXXIUP 300 WP ADAD ANTIDERAPANT 1 jeu de 2 pi ces droite et gauche MU G GUIDON MAXXIUP 300 MU PD PIED DROIT DE MAXXIUP 300 PIED GAUCHE DE M
15. ting time and the rest time of the actuator e For 10 of usage time it takes 90 of sleep time e For 6 minutes of continuous use you must wait 54 minutes before you could reuse the device If this period is not respected the device will not work and a jack will be displayed on the screen When this cycle is exceeded there is a risk from overheating the equipment and cause a failure Soft stop and soft start Actuator Programming 1 Push on the Emergency stop button Push on button 1 and turn off the emergency stop button The Control box Green led is flashing 3 times Soft stop and soft start available 2 times Soft stop and soft start unavailable Release button 1 on the handset after cessation of the green LED User Manual Stand Up Lift MAXXI UP 300 Manufactured by NAUSICAA M dical S A Approved by Ghizlane Labrosse Biomedical Engineer 11 12 Troubleshooting Guide Problem The product without patient does not go down Origin Our products need some weight to go down Solutions Push down on the lifting arm while pushing the lowering button on the remote control Mobile parts are too hard product is difficult to handle The actuator does not work but the user can hear a click in the control box when the remote control button is pushed Mobile parts need to be greased 1 Batteries are unloaded 2 The actuator jack is not plugged 3 The actuator jack is deteriorated 4 Ther
Download Pdf Manuals
Related Search